Videotec Was 5 or 23 Liter Tank Manuel utilisateur

ENGLISH ITALIANO FRANÇAIS DEUTSCH

РУССКИЙ

EN

English - Instructions manual

IT

Italiano - Manuale di istruzioni

FR

Français - Manuel d’instructions

DE

Deutsch - Bedienungslanleitung

RU

Русский - Руководство по эксплуатации

WAS

5 or 23 liter tank with pump

EN

English - Instruction manual

ENGLISH

WAS

5 or 23 liter tank with pump

Contents

ENGLISH 1

1 About this manual ......................................................................................................... 5

1.1 Typographical conventions .................................................................................................................................. 5

2 Notes on copyright and information on trademarks .................................................. 5

3 Safety rules..................................................................................................................... 5

4 Identication .................................................................................................................. 6

4.1 Product description and type designation..................................................................................................... 6

4.2 Product marking ...................................................................................................................................................... 6

5 Preparing the product for use ...................................................................................... 6

5.1 Unpacking .................................................................................................................................................................. 6

5.2 Contents ...................................................................................................................................................................... 6

5.3 Safely disposing of packaging material ........................................................................................................... 6

6 Installation ..................................................................................................................... 7

6.1 Fastening of the metal cage ................................................................................................................................ 7

6.2 Choosing the power supply ................................................................................................................................. 8

6.3 Open the box............................................................................................................................................................. 8

6.4 Board description .................................................................................................................................................... 8

6.5 Connection of the board ....................................................................................................................................... 9

6.5.1 Installing the fuse .................................................................................................................................................................... 9

6.5.2 Connection of the power supply line ............................................................................................................................... 9

6.6 Connection of the pump motor ......................................................................................................................... 9

6.7 Pump installation ................................................................................................................................................... 10

6.7.1 Pump with 5m (16ft) or 11m (36ft) delivery ................................................................................................................10

6.7.2 Pump with 30m (98ft) delivery ......................................................................................................................................... 10

7 Maintenance ................................................................................................................11

7.1 Fuses replacement ................................................................................................................................................11

7.1.1 Replacing the fuse of the pump board .......................................................................................................................... 11

7.1.2 Replacing the fuse on the pump inlet ...........................................................................................................................11

8 Information on disposal and recycling ...................................................................... 11

9 Technical data .............................................................................................................. 12

9.1 Washer kit, tank of 5l (1.3gal), pump with 5m (16ft) delivery head .....................................................12

9.1.1 Mechanical ............................................................................................................................................................................... 12

9.1.2 Electrical ....................................................................................................................................................................................12

9.1.3 Environment ............................................................................................................................................................................12

9.1.4 Certications ...........................................................................................................................................................................12

9.2 Washer kit, tank of 23l (6gal), pump with 5m (16ft) delivery head ......................................................12

9.2.1 Mechanical ............................................................................................................................................................................... 12

9.2.2 Electrical ....................................................................................................................................................................................12

9.2.3 Environment ............................................................................................................................................................................12

9.2.4 Certications ...........................................................................................................................................................................12

9.3 Washer kit, tank of 23l (6gal), pump with 11m (36ft) delivery head ...................................................13

9.3.1 Mechanical ............................................................................................................................................................................... 13

EN - English - Instruction manual

4MNVCWAS_2104_EN

9.3.2 Electrical ....................................................................................................................................................................................13

9.3.3 Environment ............................................................................................................................................................................13

9.3.4 Certications ...........................................................................................................................................................................13

9.4 Washer kit, tank of 23l (6gal), pump with 30m (98ft) delivery head ...................................................13

9.4.1 Mechanical ............................................................................................................................................................................... 13

9.4.2 Electrical ....................................................................................................................................................................................13

9.4.3 Environment ............................................................................................................................................................................13

9.4.4 Certications ...........................................................................................................................................................................13

10 Technical drawings .................................................................................................... 14

Instruction manual - English - EN

5

MNVCWAS_2104_EN

1 About this manual

Read all the documentation supplied carefully before

installing and using this unit. Keep the manual in a

convenient place for future reference.

1.1 Typographical conventions

DANGER!

High level hazard.

Risk of electric shock. Disconnect the

power supply before proceeding with any

operation, unless indicated otherwise.

DANGER!

Hot surface.

Avoid contact. Surfaces are hot and may

cause personal injury if touched.

CAUTION!

Medium level hazard.

This operation is very important for the

system to function properly. Please read

the procedure described very carefully and

carry it out as instructed.

INFO

Description of system specications.

We recommend reading this part carefully

in order to understand the subsequent

stages.

2 Notes on copyright and

information on trademarks

The mentioned names of products or companies are

trademarks or registered trademarks.

3 Safety rules

CAUTION! The electrical system to which

the unit is connected must be equipped

with a 20A max automatic bipolar circuit

breaker. The minimum distance between

the circuit breaker contacts must be

3mm (0.1in). The circuit breaker must be

provided with protection against the fault

current towards the ground (dierential)

and the overcurrent (magnetothermal).

CAUTION! Device installation and

maintaining must be performed by

specialist technical sta only.

• The manufacturer declines all responsibility

for any damage caused by an improper use

of the appliances mentioned in this manual.

Furthermore, the manufacturer reserves the right

to modify its contents without any prior notice.

The documentation contained in this manual has

been collected and veried with great care. The

manufacturer, however, cannot take any liability

for its use. The same thing can be said for any

person or company involved in the creation and

production of this manual.

• Before starting any operation, make sure the

power supply is disconnected.

• Be careful not to use cables that seem worn or old.

• Never, under any circumstances, make any

changes or connections that are not shown in

this handbook. Improper use of the appliance

can cause serious hazards, risking the safety of

personnel and of the installation.

EN - English - Instruction manual

6MNVCWAS_2104_EN

• Use only original spare parts. Non-original spare

parts could cause re, electrical discharge or other

hazards.

• Before proceeding with installation, check the

supplied material to make sure it corresponds

to the order specication by examining the

identication labels (4.2 Product marking, page 6).

• A power disconnect device must be included

in the electrical installation, and it must be very

quickly recognizable and operated if needed.

4 Identication

4.1 Product description and type

designation

WAS is a Videotec wash kit for housings equipped

with wipers and consists of a tank with a built-in

pump.

This wide range of wash kits comes in capacities from

5 to 23 litres and delivery heads of up to 30 metres.

In the 30m (98ft) delivery versions the lack of liquid

in the tank is signalled following the automatic stop

of the pump

The 30m (98ft) delivery head versions are only

available in 230Vac or 120Vac.

Using the anti-freeze liquid, the minimum operating

temperature (versions with 5m or 11m delivery

heads) can reach as low as -25°C (-13°F).

4.2 Product marking

See the label attached to the product.

5 Preparing the product for

use

Any change that is not expressly approved

by the manufacturer will invalidate the

guarantee.

5.1 Unpacking

When the product is delivered, make sure that the

package is intact and that there are no signs that it

has been dropped or scratched.

If there are obvious signs of damage, contact the

supplier immediately.

When returning a faulty product we recommend

using the original packaging for shipping.

Keep the packaging in case you need to send the

product for repairs.

5.2 Contents

Check the contents to make sure they correspond

with the list of materials as below:

• Windows washing kit

• Cable tie¹

• Silicone sheath¹

• Terminal¹

• Delivery pipe

• Instruction manual

¹ Only for models with 5m (16ft) or 11m (36ft) delivery heads.

5.3 Safely disposing of packaging

material

The packaging material can all be recycled. The

installer technician will be responsible for separating

the material for disposal, and in any case for

compliance with the legislation in force where the

device is to be used.

Instruction manual - English - EN

7

MNVCWAS_2104_EN

6 Installation

Install the pump with 30m (98ft) pressure

head in places protected from heavy rain.

The product must be fastened with suitable

equipment. The fastening means must

guarantee the mechanical seal when a force

equal to at least 3 times the weight of the

device is applied.

6.1 Fastening of the metal cage

Take the plug out of the tank, along with any pumps

and level gauges. Remove the tank from the metal

cage.

Attach the metal cage (01) rmly to a wall using the

holes provided for this (02).

01

02

Fig. 1 Water tank 5l (1.3gal), 5m (16ft) delivery.

01

02

Fig. 2 Water tank 23l (6gal), 5m (16ft) or 11m (36ft) delivery.

01

02

Fig. 3 Water tank 23l (6gal), 30m (98ft) delivery.

EN - English - Instruction manual

8MNVCWAS_2104_EN

6.2 Choosing the power supply

Depending on the version, the device can be

provided with dierent power supply voltages. Their

value is shown on the product identication label.

Electrical connections must be performed

with the power supply disconnected and

the circuit-breaker open.

When commencing installation make sure

that the specications for the power supply

for the installation correspond with those

required by the device.

Check that the power supply socket and

cable are adequately dimensioned.

Use a power cable that is suitable for

outdoor use (example: H05RH-F).

6.3 Open the box

The operation is performed only for a pump

with a 5m or 11m delivery head.

Open the cover of the water-proof box and connect

as described below.

Fig. 4

6.4 Board description

The operation is performed only for a pump

with a 5m or 11m delivery head.

BOARD DESCRIPTION

Connector Function

J5 Power supply for the board

FUS1 Power supply selection fuse (230Vac)

FUS2 Power supply selection fuse (120Vac)

FUS3 Power supply selection fuse (24Vac)

Tab. 1

J5

FUS3

FUS2

FUS1

Fig. 5

Instruction manual - English - EN

9

MNVCWAS_2104_EN

6.5 Connection of the board

Electrical connections must be performed

with the power supply disconnected and

the circuit-breaker open.

The operation is performed only for a pump

with a 5m or 11m delivery head.

Identify the position of the fuses (FUS1, FUS2, FUS3)

and the power supply terminal (J5) on the pump

control board. (6.4 Board description, page8).

6.5.1 Installing the fuse

Depending on the power supply voltage

choose the right fuse holder.

230V

FUS1

120V

FUS2

24V

FUS3

Fig. 6

The board is supplied with the fuse in the following

position: FUS1, 230Vac (6.4 Board description, page

8).

6.5.2 Connection of the power supply

line

The power supply cable must be covered

by the silicone sheath (01) supplied. The

silicone sheath must be fastened with the

corresponding cable tie (02).

01

J5

02

Neutral (N)

Phase (L)

Fig. 7

Use a suitably sized cable to connect the power

supply terminal J5 to the mains.

6.6 Connection of the pump

motor

Operation valid for pump with 30m (98ft)

delivery.

Use the auxiliary terminal (01) located in the pump

airtight casing.

Connect the earth cable to the pump casing (earth

hole) (02).

Use a suitably sized cable to connect the power

supply terminal to the mains.

02

01

Phase (L) Earth

Neutral (N)

Fig. 8

EN - English - Instruction manual

10 MNVCWAS_2104_EN

6.7 Pump installation

Be very careful not to start the pump when

the tank is empty.

We recommend lling the tank with water

at ambient temperature. If using the pump

at temperatures below 3°C (37.4°F) add

some glass cleaner antifreeze liquid to the

water.

The antifreeze liquid will cause irreparable

damage to the germanium windows. In this

case, do not use anti-freeze liquid, but add

ethanol in a 20% solution.

If present, the level switch enables

automatic stoppage of the pump.

6.7.1 Pump with 5m (16ft) or 11m (36ft)

delivery

Fill the tank with water and insert it in the metal cage.

Insert the pump in the tank and close the cap.

The system is ready to be powered.

6.7.2 Pump with 30m (98ft) delivery

Avoid contact with the pump motor. Hot

surfaces may cause personal injury if

touched.

Adjust the position of the level switch and the ballast.

220mm

120mm

Fig. 9

Fill the tank with water and insert it in the metal cage.

Ensure that the male/female hydraulic joint (01) is

inserted correctly. Insert the oat in the tank and

close the cap. Check the delivery hose coupling for

the pump (02) to make sure a small quantity of water

comes out.

02

01

Fig. 10

Unscrew the nut (01). Slide it along the delivery pipe

(02). Insert the end of the pipe into the ogive (03).

Lock the nut to the coupling.

02

01

03

04

Fig. 11

The system is ready to be powered.

Instruction manual - English - EN

11

MNVCWAS_2104_EN

7 Maintenance

7.1 Fuses replacement

Maintenance must be performed with the

power supply disconnected and the circuit-

breaker open.

The operation is performed only for a pump

with a 5m or 11m delivery head.

Check the causes that caused the fuse breakage.

In the event the problem occurs again, contact the

technical assistance service.

7.1.1 Replacing the fuse of the pump

board

The used fuse is described below.

• T 4A H 250V: BUSSMANN S505-4-R or

OMEGA GT520240

As an alternative, use an approved fuse featuring the

same characteristics.

For further information refer to the relative

chapter (6.5.1 Installing the fuse, page9).

7.1.2 Replacing the fuse on the pump

inlet

The used fuses are described below.

Pump with 5m (16ft) delivery:

• T 2A L 250V: BUSSMANN S506-2-R or

OMEGA ST522220

Pump with 11m (36ft) delivery:

• T 4A L 250V: BUSSMANN S506-4-R or

OMEGA ST522240

As an alternative, use an approved fuse featuring the

same characteristics.

Once the box is open identify the fuse position.

Fig. 12

8 Information on disposal

and recycling

The European Directive 2012/19/EU on Waste

Electrical and Electronic Equipment (WEEE) mandates

that these devices should not be disposed of in the

normal ow of municipal solid waste, but they should

be collected separately in order to optimize the

recovery stream and recycling of the materials that

they contain and to reduce the impact on human

health and the environment due to the presence of

potentially hazardous substances.

The symbol of the crossed out bin is marked

on all products to remember this.

The waste may be delivered to appropriate collection

centers, or may be delivered free of charge to the

distributor where you purchased the equipment at

the time of purchase of a new equivalent or without

obligation to a new purchase for equipment with size

smaller than 25cm .

For more information on proper disposal of these

devices, you can contact the responsible public

service.

EN - English - Instruction manual

12 MNVCWAS_2104_EN

9 Technical data

The product has been designed to work

intermittently.

1 minute: ON. 15 minutes: OFF.

9.1 Washer kit, tank of 5l (1.3gal),

pump with 5m (16ft) delivery

head

9.1.1 Mechanical

Polyethylene tank, stainless steel cage

Dimensions (WxHxL): 217x272x257mm

(8.5x10.7x10.1in)

Unit weight: 3.5kg (7.7lb)

Water tank capacity: 5l (1.3gal)

Delivery head: 5m (16ft) max

Tube length: 5m (16ft)

9.1.2 Electrical

Supply voltage/Current consumption:

• 230Vac, 0.3A, 50/60Hz

• 120Vac, 0.6A, 50/60Hz

• 24Vac, 1.8A, 50/60Hz

9.1.3 Environment

Operating temperature

• Maximum temperature: 60°C (140°F)

• Minimum temperature with antifreeze liquid in

solution: -10°C (14°F)

• Minimum temperature with antifreeze liquid

in solution (reduced performance and delivery

height): -25°C (-13°F)

9.1.4 Certiﬁcations

Electrical safety (CE): EN60950-1, EN62368-1

Electromagnetic compatibility (CE): EN50130-4,

EN61000-6-3, EN55032 (Class B), FCC Part 15 (Class B)

Outdoor installation (CE): EN60950-22

IP protection degree (EN60529):

• IP66

EAC certiﬁcation

9.2 Washer kit, tank of 23l (6gal),

pump with 5m (16ft) delivery

head

9.2.1 Mechanical

Polyethylene tank, stainless steel cage

Dimensions (WxHxL): 301x410x348mm

(11.8x16.1x13.7in)

Unit weight: 5.4kg (11.9lb)

Water tank capacity: 23l (6gal)

Delivery head: 5m (16ft) max

Tube length: 5m (16ft)

9.2.2 Electrical

Supply voltage/Current consumption:

• 230Vac, 0.3A, 50/60Hz

• 120Vac, 0.6A, 50/60Hz

• 24Vac, 1.8A, 50/60Hz

9.2.3 Environment

Operating temperature

• Maximum temperature: 60°C (140°F)

• Minimum temperature with antifreeze liquid in

solution: -10°C (14°F)

• Minimum temperature with antifreeze liquid

in solution (reduced performance and delivery

height): -25°C (-13°F)

9.2.4 Certiﬁcations

Electrical safety (CE): EN60950-1, EN62368-1

Electromagnetic compatibility (CE): EN50130-4,

EN61000-6-3, EN55032 (Class B), FCC Part 15 (Class B)

Outdoor installation (CE): EN60950-22

IP protection degree (EN60529):

• IP66

EAC certiﬁcation

Instruction manual - English - EN

13MNVCWAS_2104_EN

9.3 Washer kit, tank of 23l (6gal),

pump with 11m (36ft) delivery

head

9.3.1 Mechanical

Polyethylene tank, stainless steel cage

Dimensions (WxHxL): 301x410x348mm

(11.8x16.1x13.7in)

Unit weight: 5.9kg (13lb)

Water tank capacity: 23l (6gal)

Delivery head: 11m (36ft) max

Tube length: 11m (36ft)

9.3.2 Electrical

Supply voltage/Current consumption:

• 230Vac, 0.5A, 50/60Hz

• 120Vac, 1A, 50/60Hz

• 24Vac, 3.8A, 50/60Hz

9.3.3 Environment

Operating temperature

• Maximum temperature: 60°C (140°F)

• Minimum temperature with antifreeze liquid in

solution : -10°C (14°F)

• Minimum temperature with antifreeze liquid

in solution (reduced performance and delivery

height): -25°C (-13°F)

9.3.4 Certiﬁcations

Electrical safety (CE): EN60950-1, EN62368-1

Electromagnetic compatibility (CE): EN50130-4,

EN61000-6-3, EN55032, (Class B), FCC Part 15 (Class B)

Outdoor installation (CE): EN60950-22

IP protection degree (EN60529):

• IP66

EAC certiﬁcation

9.4 Washer kit, tank of 23l (6gal),

pump with 30m (98ft) delivery

head

9.4.1 Mechanical

Polyethylene tank, stainless steel cage

Dimensions (WxHxL): 301x620x348mm

(11.9x24.4x13.7in)

Unit weight: 13.9kg (30.6lb)

Water tank capacity: 23l (6gal)

Delivery head: 30m (98ft) max

Tube length: 30m (98ft)

Switch for liquid level

9.4.2 Electrical

Supply voltage/Current consumption:

• 230Vac, 2A, 50/60Hz

• 120Vac, 4.5A, 60Hz

9.4.3 Environment

Operating temperature

• Maximum temperature: 60°C (140°F)

• Minimum temperature with antifreeze liquid in

solution: -10°C (14°F)

9.4.4 Certiﬁcations

Electrical safety (CE): EN60950-1, EN62368-1

Electromagnetic compatibility (CE): EN50130-4,

EN61000-6-3, EN55032, (Class B), FCC Part 15 (Class B)

IP protection degree (EN60529):

• IPX4

EAC certiﬁcation

EN - English - Instruction manual

14 MNVCWAS_2104_EN

10 Technical drawings

The dimensions of the drawings are in millimetres.

110257

15074

15066

272

Ø 8

177

235

272

217

88

Fig. 13 Water tank 5l (1.3gal), 5m (16ft) delivery.

Ø 8

301348

269 200

152

410

136

Fig. 14 Water tank 23l (6gal), 5m (16ft) or 11m (36ft) delivery.

Instruction manual - English - EN

15

MNVCWAS_2104_EN

620

136 152

410210

269 301

200

Ø 8

Fig. 15 Water tank 23l (6gal), 30m (98ft) delivery.

Headquarters Italy Videotec S.p.A.

Via Friuli, 6 - I-36015 Schio (VI) - Italy

Tel. +39 0445 697411 - Fax +39 0445 697414

Email: [email protected]

France Videotec France SARL

Immeuble Le Montreal, 19bis Avenue du Québec, ZA de Courtaboeuf

91140 Villebon sur Yvette - France

Tel. +33 1 60491816 - Fax +33 1 69284736

Email: info.fr@videotec.com

Asia Pacic Videotec (HK) Ltd

Flat 8, 19/F. On Dak Industrial Building, No. 2-6 Wah Sing Street

Kwai Chung, New Territories - Hong Kong

Tel. +852 2333 0601 - Fax +852 2311 0026

Email: info.hk@videotec.com

Americas Videotec Security, Inc.

Gateway Industrial Park, 35 Gateway Drive, Suite 100

Plattsburgh, NY 12901 - U.S.A.

Tel. +1 518 825 0020 - Fax +1 518 825 0022

Email: info.usa@videotec.com - www.videotec.com

www.videotec.com

MNVCWAS_2104_EN

IT

Italiano - Manuale di istruzioni

ITALIANO

WAS

Tanica da 5 o 23 litri con pompa

La page est en cours de chargement...

Videotec Was 5 or 23 Liter Tank Manuel utilisateur

Videotec Was 5 or 23 Liter Tank Manuel utilisateur

dans d''autres langues

Documents connexes