for Living 5-Blade 3-Speed 4-Lights Le manuel du propriétaire

52" 4-Light Ceiling Fan

Model No. 052-9705-6

From your first apartment to downsizing

your family home,

For Living is a great place to start.

Uncomplicate yourlife with timeless style

and reliable quality that delivers everyday

solutionsfor your home.

Let us know how our products

work for you. Rate and review at

canadiantire.ca

Instructions for Use

Technical Data

Assembly Troubleshooting

Caring for Your Item

Warranty

14

15

16

17

18

Parts List

Exploded View

Hardware List

Before You Begin Assembly

Step-by-step Guide

2

3

4

5

7

1

52"4-Light Ceiling Fan

•Please read and understand this entire manual before attempting to assemble,

operate, or install the product.

•Any assembly or maintenance of the product must be carried out by adults only.

•Some parts may contain sharp edges. Wear protective gloves if necessary.

•To prevent damage, place all parts on a level surface during assembly.

Add a layer of protective surface if needed.

•Due to the nature of steel, surface oxidation (rusting) will occur if this protective coating

is scratched. This is a natural process. To minimize this condition, it is recommended

that care be taken when assembling and handling the product in order to prevent the

paint from being scratched.

Table of Contents

Warning! Please use your furniture correctly and safely. Improper use

can cause safety hazards, or damage to your furniture or household

items. Carefully read the following safety information.

1

2

3

4

5

6

7

8

1

5

1

4

2

Item Description Thumbnail Quantity

Motor cover

Blade Arm

Blade

Light Kit

Glass Shade

Chain

Hanger bracket

Downrod assembly

252"4-Light Ceiling Fan

Parts List

三

3

52"4-Light Ceiling Fan

Exploded View

Bulbs are not included

Accessory bag

After opening the package you should find all the necessary parts for installing this

ceiling fan , including a parts pack containing:

452"4-Light Ceiling Fan

Item Description Thumbnail Quantity

2

1

16

1

2

Blade screws

Zip tie

Balance pieces

Balance clip

Washers 20

Wood screws

"J" hook

Screws

Extra blade bracket screw

1

2

3

4

5

6

7

8

9

Hardware List

Wire connector

10 3

5

52"4-Light Ceiling Fan

Before You Begin Assembly

DO NOT:

A dry dust cloth is suitable for most cleanings.

Should the ceiling fan become wet, have a qualified electrician inspect it before next use.

In order to comply with safety regulations and to avoid safety hazards, ceiling fan repairs must be

carried out by qualified personnel.

Pay attention to the ceiling fan blades when cleaning, painting or working nearby.

Children do not recognize the dangers that may occur when operating ceiling fan. Keep children away

from ceiling fans.

Note: Always turn the power off before servicing the ceiling fan.

Please retain this manual for future reference.

Expose the ceiling fan to water or immerse it in water.

Operate the ceiling fan if it shows any signs of damage or if it has been dropped.

Attempt to remove any parts of the housing or insert any object while the ceiling

fan is operating.

Position the ceiling fan on or near hot surfaces such as stove tops, or near open

flames. Expose the ceiling fan to rain or moisture. Do not operate the ceiling fan

outdoors or with wet hands.

Use the reverse switch while the fan blades are in motion. This could result in

damage to the ceiling fan.

Do not hang any decorations or external items onto the fan blades.

If fan starts to wobble, shut off power immediately and have a qualified

electrician inspect it before next use.

This ceiling fan is designed for household use only and not for commercial applications. No responsibility

is accepted for damage resulting from improper use or noncompliance with the instructions.

To avoid possible electric shock, be sure electricity at the fuse box or the circuit

breaker is turned off before wiring.

All wiring must be done in accordance with national and local wiring codes. Consult a

qualified electrician to ensure correct branch circuit conductor.

Follow the recommended instructions for the proper method of wiring for the new

ceiling fan. The ceiling fan must be grounded as a precaution against possible electric

shock.

If you do not have sufficient electrical wiring knowledge, have the fan installed by a

licensed electrician.

The outlet box and joist must be securely mounted and capable of reliably supporting

at least 50 lb (22.7 kg).

Mount the lowest moving parts at least 10’ (3.05 m) above floor or ground level.

Make sure all electrical connections are sealed with proper connector and electrical

tape inside the outlet box.

Make sure the ceiling fan is securely fastened to the ceiling.

All set screws must be checked and re-tightened where necessary before fan

operation.

Mount only to an outlet box marked acceptable for fan support.

To prevent injury, make sure the fan blades are not bent and that there are no objects

within the rotation area.

The important precautions, safeguards and instructions appearing in this manual are

not meant to cover all possible situations. It must be understood that common sense

and caution are factors which cannot be built into the product.

Not suitable for use with solid-state speed controls.

652"4-Light Ceiling Fan

Before You Begin Assembly

Gettinq ready

Unpack and inspect carefully to make sure all parts

are included and not damaged. Lay all pieces out on

a working space.

Turn off power at fuse box or circuit breaker to avoid

possible electrical shock.

Choosinq a location for the ceilinq fan

For effective air circulation, fans should be located in the centre of the room, or a minimum of

32" (81.3 cm) from adjacent walls or obstructions.

Choose a location where there is a high enough ceiling clearance (at least 10’ / 3.05 m from

the floor to the ceiling fan's lowest moving part).

Ensure that the outlet box in the room's ceiling can support the weight of the fan. Typically, if the

outlet box is marked acceptable for fan support, it can hold the fan securely.

This method is preferred if the ceiling is sloped or vaulted, or if

ceiling is extra high, requiring the need of a downrod.

Drop-mount (for normal ceilinqs)

Mounting options

Preparing for installation

7

52"4-Light Ceiling Fan

Step-by-step Guide

2

1B

Installation

STEP 1

The hanger bracket depicted will vary

depending on the model.

Remove the four sets of side screws from hanger

bracket and save for future use.

Wooden ceiling

Drill two mounting holes in the ceiling joist.

Securely attach the hanger bracket to the ceiling

or wooden ceiling as indicated (Fig. 1A).

Normal masonry ceiling

Securely attach the mounting bracket to

an outlet box marked "Acceptable for Fan

Support", using the supplied outlet box screws

with two washers (see Fig. 1B).

STEP 2

Canopy picture may vary from product for

some styles of ceiling fans.

Downrod assembly

Carefully hang the main side of the fan on the

hook of the support on the hanger bracket so

that it is securely suspended (see Fig. 2).

1A

852"4-Light Ceiling Fan

Step-by-step Guide

4

3

zip tie

Note: Attach safety cable from fan unit to "J"

hook in outlet box. Secure by looping zip tie

through safety cable and "J" hook. Tighten zip

tie securely.

STEP 3

Pull the 120 V supply wires (the black, white

and ground wires) out of the outlet box and

through the hole in the mounting plate.

Refer to page 10 in this manual for the

wiring instructions.

STEP 4

After connecting the wire, take out the

assembly from the mounting bracket, put the

two wings of assembly into the holes of

hanger bracket and align the screw holes

(see Fig. 4).

IMPORTANT: If you are not sure if the electrical outlet box and fan are grounded, contact a

licensed electrician for advice. They must be grounded for safe operation.

WARNING: To avoid possible electric shock, be sure electricity is turned off at the main fuse

box before wiring.

9

52"4-Light Ceiling Fan

Step-by-step Guide

5

STEP 5

After the upper and lower brackets are

aligned with the screw holes, tighten the 4

screws until the upper and lower brackets are

fixed (see Fig. 5).

Fan Wiring Instructions:

Three cables are reserved for the FAN host: black (FAN L), white (N), and blue (Light L).

Connect the white (N) wire to the neutral wire on the wall. Connect the black (FAN L) live

wire and the blue (Light L) Light wire together to the live wire on the wall.

The fan cable (Green) connects to the ground cable on the wall.

Please see the following example for specific connection operation:

Blue

Black

White

GREEN

AC IN L

AC IN N

Ground wire

10 52"4-Light Ceiling Fan

Step-by-step Guide

C

When wires are matched up, connect them by twisting frayed ends together (see Fig. A).

Screw wire connectors (3 are provided) onto the tops of the twisted wires (see Fig. B).

Fasten them with electrical tape (see Fig. C).

WARNING: Secure the connectors with electrical tape and ensure there are no loose strands

or connections.

AB

11

52"4-Light Ceiling Fan

6

STEP 6

Push the large diameter of the motor

housing up through the main assembly until

it is aligned with the screw holes on both

sides of the ceiling support, and then lock

the screws on both sides until the motor

housing is directly fixed (see Fig.6).

7B

7A

STEP 7

Fasten fan blades to blade arms by using the

blade screws and washers (see Fig. 7A).

Note: This ceiling fan includes 5 dual-finished

blades. Depending on personal preference,

choose the side that best suits the decor or

furniture of your room.

Install the blade arms with blades on the

main assembly (see Fig. 7B).

12 52"4-Light Ceiling Fan

Step-by-step Guide

8B

8A

Remove the locking ring from the socket.

Slide the glass shade onto the socket.

Re-install the locking ring until clamped

on hand-tight (see Fig. 8B).

STEP 8

Insert the neutral line (white) and live line

(blue) reserved in the switch box at the

bottom of the main body and the neutral

line (white) and live line (black) reserved

for light kit, then align the cover and the

switch box with the holes, and fix the 3

screws (see Fig. 8A).

13

52"4-Light Ceiling Fan

Step-by-step Guide

IMPORTANT NOTE：

If you replace the bulbs, the wattage can't exceed 70 W total.

STEP 9

Install 4 x 15 W bulbs (not included).

Screw the bulb into the lamp holder (see

Fig. 9).

10

9

STEP 10

Attach the two extension chains

provided in the parts bag to the existing

chains on the fan itself (see Fig. 10).

This ceiling fan is equipped with reverse switch for downward or upward air flow.

Do not change the direction of rotation while the fan blades are in motion.

To change direction, turn off the fan and wait for the blades to stop rotating

before setting the switch to the desired rotation direction, either forward or

reverse.

NOTE:

Switch housing

Reverse

Reverse switch

Forward

On this setting, the fan will turn counter-clockwise

to create a cooling effect. Use this function during

warmer weather to circulate the hot air away

from your living space.

On this setting, the fan will turn clockwise. Use this

function during cooler weather to re-circulate

warm air.

Forward function

Reverse function

Instructions for Use

14 52"4-Light Ceiling Fan

52 x 52 x 14” (132 x 132 x 35 cm)

5 7/8” (15 cm)

14” (35 cm)

Assembled Dimensions(W x D x H)

Ceiling to blade height

Full lamp height after installation

17 lb 7 oz (7.9 kg)

Weight

Technical Data

15

52"4-Light Ceiling Fan

TROUBLESHOOTING

ENVIRONMENTAL PROTECTION

Used electrical appliances are recyclable and should not be discarded in your regular

domestic waste! Please actively support us in conserving resources and protecting the

environment by returning this appliance to a collection centre (if available).

Problem

Lights do

not work.

Possible reason

Wires are not properly connected.

Light bulbs are faulty.

Ensure wire connector in switch

housing is connected.

Unscrew light bulbs and discard

properly. Insert new bulb(s).

Solution

Fan is not properly located.

Fan is in reverse (blades are moving in

clockwise direction).

Fan does

not seem to

move much

air.

Counter-clockwise (forward) is

recommended in warm weather.

Turn off fan and power and wait for

rotation to stop. Change the forward/

reverse slide switch.

Place fan in the centre of the room

so there is at least 12" (30 cm)

between the end of the blades and

walls or other obstructions.

Make sure that screws which attach

fan blade clips to motor are fastened

and tightened.

Tighten screws of fan blade to blade

clip securely.

Ensure that canopy and mounting

bracket are tightened securely to

ceiling joist.

Check by selecting a point on the

ceiling above the tip of one of the

blades. Measure this distance and

ensure all blades are even. If all blade

levels are not equal, adjust

accordingly (see Balancing Kit

Manual).

Screws securing fan blade clips to motor

are loose.

Fan blade and its blade clip are not

fastened securely.

Canopy and mounting bracket are not

tightened securely.

Blades are unbalanced.

Fan wobbles

or shakes

excessively.

Touching

ceiling

Assembly Troubleshooting

16 52"4-Light Ceiling Fan

HOW TO USE THE BALANCE KIT TO SOLVE THE WOBBLING PROBLEM

·Put the clip on the centre of a blade. Turn on the fan

and if the wobble persists, put the clip on another

blade until the wobble is reduced. Replace the

balancing clip with counterweight provided in the

balancing pieces.

·Place the clip on the blade that needs the counterweight

and place in different locations, from the centre to

the tip of the blade, until the wobble disappears.

·Paste the counterweight on the surface of the

blade near the clip, remove the clip and test

the fan. If vibrations persist, put on another

counterweight. If it gets worse, try another area

to place the weight.

Because of the fan's natural movement, some connections may become loose. Check the support

connections, brackets and blade attachments twice a year. Make sure they are secure.

There is no need to oil your fan. The motor has permanently lubricated bearings.

MAINTENANCE

CARE AND CLEANING

Dust your fan periodically with a soft, dry cloth. Do not use harsh cleaners or materials as they may

damage the unit.

To prevent bending the blades during cleaning, support the blades so that no pressure is applied to

them.

Caution!

Do not allow water to come in contact with fan blades or the ceiling fan. Doing so will create

fire and/or shock hazards, damaging property.

Caring for Your Item

17

52"4-Light Ceiling Fan

1-Year Limited Warranty

This For Living product carries a one (1) year warranty against defects in workmanship and

materials. Trileaf Distribution agrees to replace the defective product free of charge within

the stated warranty period, when returned by the original purchaser with proof of purchase.

This product is not guaranteed against wear or breakage due to misuse and/or abuse.

Model No. 052-9705-6

Made in China

Imported by Trileaf Distribution Trifeuil Toronto, Canada M4S 2B8

Warranty

18 52"4-Light Ceiling Fan

La page charge ...

for Living 5-Blade 3-Speed 4-Lights Le manuel du propriétaire

for Living 5-Blade 3-Speed 4-Lights Le manuel du propriétaire

Documents connexes

Autres documents