for Living 3-Reversible Blade 3-Speed Le manuel du propriétaire

60" Ceiling Fan

Model No. 052-9715-2

From your first apartment to downsizing

your family home,

For Living is a great place to start.

Uncomplicate yourlife with timeless style

and reliable quality that delivers everyday

solutionsfor your home.

Let us know how our products

work for you. Rate and review at

canadiantire.ca

1

Parts List

Exploded View

Hardware List

Before You Begin Assembly

Step-by-step Guide

2

3

4

5

7

Remote Instructions

Instructions for Use

Technical Data Assembly

Troubleshooting

Caring for Your Item

Warranty

13

14

15

16

17

60" Ceiling Fan

Warning! Please use your furniture correctly and safely. Improper use

can cause safety hazards, or damage to your furniture or household

items. Carefully read the following safety information.

•Please read and understand this entire manual before attempting to assemble,

operate, or install the product.

•Any assembly or maintenance of the product must be carried out by adults only.

•Some parts may contain sharp edges. Wear protective gloves if necessary.

•To prevent damage, place all parts on a level surface during assembly.

Add a layer of protective surface if needed.

•Due to the nature of steel, surface oxidation (rusting) will occur if this protective

coating is scratched. This is a natural process. To minimize this condition, it is

recommended that care be taken when assembling and handling the product in

order to prevent the paint from being scratched.

Table of Contents

18

Parts List

   

 1

  1

3  ｀1





冬1

5  勹1

6 加酗 旧

 1

  1

8  三3

9  � 1

2 " Ceiling Fan

10

Wire connector

3

60" Ceiling Fan

Exploded View

After opening the package you should find all the necessary parts

for installing this ceiling fan, including a parts pack containing:

但



甘

�

国

二＝

□

屈

4 60" Ceiling Fan

Item Description

Wood screws

Screws

Extra blade bracket screw

"J" hook

Zip tie

Balance pieces

Balance clip

Washers

Thumbnail Quantity

2

1

3

4

5

6

7

8

2

1

2

1

4

5

60" Ceiling Fan

Before You Begin Assembly

DO NOT:

Note: Always turn the power off before servicing the ceiling fan.

A dry dust cloth is suitable for most cleanings.

Should the ceiling fan become wet, have a qualified electrician inspect it before next use.

In order to comply with safety regulations and to avoid safety hazards, ceiling fan repairs must be

carried out by qualified personnel.

Pay attention to the ceiling fan blades when cleaning, painting or working nearby.

Children do not recognize the dangers that may occur when operating ceiling fan. Keep children away

from ceiling fans.

Please retain this manual for future reference.

Expose the ceiling fan to water or immerse it in water.

Operate the ceiling fan if it shows any signs of damage or if it has been dropped.

Attempt to remove any parts of the housing or insert any object while the ceiling

fan is operating.

Position the ceiling fan on or near hot surfaces such as stove tops, or near open

flames. Expose the ceiling fan to rain or moisture. Do not operate the ceiling fan

outdoors or with wet hands.

Use the reverse switch while the fan blades are in motion. This could result in

damage to the ceiling fan.

Do not hang any decorations or external items onto the fan blades.

If fan starts to wobble, shut off power immediately. Have a qualified electrician

inspect it before next use.

This ceiling fan is designed for household use only and not for commercial applications. No responsibility

is accepted for damage resulting from improper use or noncompliance with the instructions.

To avoid possible electric shock, be sure electricity at the fuse box or the circuit

breaker is turned off before wiring.

All wiring must be done in accordance with national and local wiring codes. Consult a

qualified electrician to ensure correct branch circuit conductor.

Follow the recommended instructions for the proper method of wiring for the new

ceiling fan. The ceiling fan must be grounded as a precaution against possible electric

shock.

If you do not have sufficient electrical wiring knowledge, have the fan installed by a

licensed electrician.

The outlet box and joist must be securely mounted and capable of reliably supporting

at least 50 lb (22.7 kg).

Mount the lowest moving parts at least 10’ (3.05 m) above floor or ground level.

Make sure all electrical connections are sealed with proper connector and electrical

tape inside the outlet box.

Make sure the ceiling fan is securely fastened to the ceiling.

All set screws must be checked and re-tightened where necessary before fan

operation.

Mount only to an outlet box marked acceptable for fan support.

To prevent injury , make sure the fan blades are not bent and that there are no objects

within the rotation area.

The important precautions, safeguards and instructions appearing in this manual are

not meant to cover all possible situations. It must be understood that common sense

and caution are factors which cannot be built into the product.

Not suitable for use with solid-state speed controls.

660" Ceiling Fan

Before You Begin Assembly

7

60" Ceiling Fan

Gettinq ready

Unpack and inspect carefully to make sure all parts

are included and not damaged. Lay all pieces out on

a working space.

Turn off power at fuse box or circuit breaker to avoid

possible electric shock.

Choosinq a location for the ceilinq fan

For effective air circulation, fans should be located in the centre of the room, or a minimum of

32" (81.3 cm) from adjacent walls or obstructions.

Choose a location where there is a high enough ceiling clearance (at least 10’ / 3.05 m from the

floor to the ceiling fan's lowest moving part).

Ensure that the outlet box in the room's ceiling can support the weight of the fan. Typically, if the

outlet box is marked acceptable for fan support, it can hold the fan securely.

This method is preferred if the ceiling is sloped or vaulted, or if

ceiling is extra high, requiring the need of a downrod.

Drop-mount (for normal ceilinqs)

Mounting options

Preparing for installation

Step-by-step Guide

860" Ceiling Fan

2

1B

Installation

STEP 1

The mounting bracket depicted will vary

depending on the model.

Wooden ceiling

Drill two mounting holes in the ceiling joist.

Securely attach the mounting bracket to the

ceiling or wooden ceiling as indicated

(Fig.1A)

Normal masonry ceiling

Securely attach the mounting bracket to

an outlet box marked "Acceptable for Fan

Support", using the supplied outlet box

screws with two washers (see Fig. 1B).

STEP 2

Downrod assembly

Remove the lock pin and take out the

hanger pin, then remove the hanger ball

from the downrod assembly by loosening

the set screw and removing the cross pin

(see Fig.2).

1A

Step-by-step Guide

Lock pin

Hanger pin

Cross Pin

9

60" Ceiling Fan

4

3.1

STEP 5

Align the fan blade with the hole on the

motor in the correct direction, fix the

screw, and lock the blade arms on the

motor (see Fig. 5).

Step-by-step Guide

STEP 3

Take out the safety screw from the

motor assembly (Fig. 3.1). Thread the

motor wires and safety cable through

the downrod, then slide downrod

cover, canopy cover and canopy over

the downrod as shown in (Fig. 3.2).

Warning: Ensure wiring is not pinched

or twisted.

STEP 4

After passing the wire through the

derrick, insert the rod into the host

position above the host, and lock the

safty screw directly after passing

through (see Fig. 4).

Canopy

Canopy Cover

Downrod stand cover

3.2

5

Step-by-step Guide

IMPORTANT: If you are not sure if the electrical outlet box and fan are grounded, contact a

licensed electrician for advice. They must be grounded for safe operation.

WARNING: To avoid possible electric shock, be sure electricity is turned off at the main fuse

box before wiring.

10 60" Ceiling Fan

6Cross pin

Set Screw

Hanger Ball

Step 6

Carefully reinstall the hanger ball onto rod

being sure that cross pin is in correct position,

set screws are tightened and wires are not

twisted.

STEP 7

Hang the fan onto the hanger bracket,

and make sure the slot of the hanger ball

is aligned with the clip of the hanger bracket.

7Hanger

bracket

Slot Clip

Option A. Securing your fan

The safety cable prevents the fan from

falling. Secure the safety cable to the

ceiling joist with a wood screw, star

washer and flat washer.

Option B. Securing your fan

Note: Attach safety cable from fan unit to "J"

hook in outlet box. Secure by looping zip tie

through safety cable and "J" hook. Tighten zip

tie securely. zip tie

The Safety cable

Flat Washer

Star Washer

Wood screw

Fan Wiring Instructions:

Two cables are reserved for the FAN host: black (FAN L), white (N). Connect the white

(N) wire to the neutral wire on the wall. Connect the black (FAN L) live wire to the live

wire on the wall.

The fan cable (Green) connects to the ground cable in the wall.

Please see the following example for specific connection operation:

Step-by-step Guide

11

60“ Ceiling Fan

C

When wires are matched up, connect them by twisting frayed ends together (see Fig. A).

Screw wire connectors onto the tops of the twisted wires (see Fig. B). Fasten them with

electrical tape (see Fig. C).

WARNING: Secure the connectors with electrical tape and ensure there are no loose strands

or connections.

AB

10

8

STEP 8

Once the connection has been made, slide

the receiver into the hanger bracket, taking

care not to pinch the wires (see Fig. 8).

STEP 10

Pull the lid up to cover the screw holes of the

canopy, pull the flange cover down and align

it with the switch hole.

Step-by-step Guide

Step 9

Hold the assembly by the canopy and raise

up to align the two holes in the canopy with

the holes in the mounting bracket. Tighten

the loosened screws. Now re-secure the

screws which were removed (see Fig. 9).

7

1260" Ceiling Fan

  圉印ING�

OPERATING TRANSMITTER:

 

V





 

 







 



芬 









 

DI



 

血三五



 

 





 

  



,

 





 

 

 

V



3.5







MODEL:

SS-T03

N

   



60" Ceiling Fan 

1460" Ceiling Fan

This ceiling fan is equipped with reverse switch for downward or upward air flow.

NOTE:

Switch housing

Do not change the direction of rotation while the fan blades are in

motion. To change direction, turn off the fan and wait for the blades to

stop rotating before setting the switch to the desired rotation

direction, either forward or reverse.

Forward Reverse

On this setting, the fan will turn counter-clockwise

to create a cooling effect. Use this function during

warmer weather to circulate the hot air away

from your living space.

On this setting, the fan will turn clockwise. Use this

function during cooler weather to re-circulate

warm air.

Forward function

Reverse function

Instructions for Use

15

60" Ceiling Fan

60 x 60 x 13 13/16” (152 x 152 x 35 cm)

9 7/16˝ (24 cm)

13 13/16˝ (35 cm)

Assembled Dimensions(W x D x H)

Ceiling to blade height

Full height after installation

Weight 16 lb 8 oz (7.5 kg)

Technical Data

1660" Ceiling Fan

TROUBLESHOOTING

ENVIRONMENTAL PROTECTION

Used electrical appliances are recyclable and should not be discarded in your regular

domestic waste! Please actively support us in conserving resources and protecting the

environment by returning this appliance to a collection centre (if available).

Problem Possible reason Solution

Fan is not properly located.

Fan is in reverse (blades are moving in

clockwise direction).

Fan does

not seem to

move much

air.

Counter-clockwise (forward) is

recommended in warm weather.

Turn off fan and power and wait for

rotation to stop. Change the forward/

reverse slide switch.

Place fan in the centre of the room

so there is at least 12" (30 cm)

between the end of the blades and

walls or other obstructions.

Make sure that screws which attach

fan blade clips to motor are fastened

and tightened.

Tighten screws of fan blade to blade

clip securely.

Ensure that canopy and mounting

bracket are tightened securely to

ceiling joist.

Check by selecting a point on the

ceiling above the tip of one of the

blades. Measure this distance and

ensure all blades are even. If all blade

levels are not equal, adjust

accordingly (see Balancing Kit

Manual).

Screws securing fan blade clips to motor

are loose.

Fan blade and its blade clip are not

fastened securely.

Canopy and mounting bracket are not

tightened securely.

Blades are unbalanced.

Fan wobbles

or shakes

excessively.

Touching

ceiling

Assembly Troubleshooting

17

60" Ceiling Fan

HOW TO USE THE BALANCE KIT TO SOLVE THE WOBBLING PROBLEM

Because of the fan's natural movement, some connections may become loose. Check the support

connections, brackets and blade attachments twice a year. Make sure they are secure.

There is no need to oil your fan. The motor has permanently lubricated bearings.

MAINTENANCE

CARE AND CLEANING

Dust your fan periodically with a soft, dry cloth. Do not use harsh cleaners or materials as they may

damage the unit.

To prevent bending the blades during cleaning, support the blades so that no pressure is applied to

them.

Caution!

Do not allow water to come in contact with fan blades or the ceiling fan. Doing so will create

fire and/or shock hazards, damaging property.

Caring for Your Item

·Put the clip on the centre of a blade. Turn on the fan

and if the wobble persists, put the clip on another

blade until the wobble is reduced. Replace the

balancing clip with counterweight provided in the

balancing pieces.

·Place the clip on the blade that needs the counterweight

and place in different locations, from the centre to

the tip of the blade, until the wobble disappears.

·Paste the counterweight on the surface of the

blade near the clip, remove the clip and test

the fan. If vibrations persist, put on another

counterweight. If it gets worse, try another area

to place the weight.

1860" Ceiling Fan

1-Year Limited Warranty

This For Living product carries a one (1) year warranty against defects in workmanship and

materials. Trileaf Distribution agrees to replace the defective product free of charge within

the stated warranty period, when returned by the original purchaser with proof of purchase.

This product is not guaranteed against wear or breakage due to misuse and/or abuse.

Model No. 052-9715-2

Made in China

Imported by Trileaf Distribution Trifeuil Toronto, Canada M4S 2B8

Warranty

La page est en cours de chargement...

for Living 3-Reversible Blade 3-Speed Le manuel du propriétaire

for Living 3-Reversible Blade 3-Speed Le manuel du propriétaire

dans d''autres langues

Documents connexes

Autres documents