Panasonic CF-Y7 series Manuel utilisateur

Marque: Panasonic

Modèle: CF-Y7 series

Catégorie: Des cahiers

Taper: Manuel utilisateur

Ce manuel convient également à

Please read these instructions carefully before using this product and save this manual for future use.

Contents

Getting Started

Useful Information

Troubleshooting

Getting StartedUseful InformationTroubleshootingAppendix

Appendix

OPERATING INSTRUCTIONS

Personal Computer

Model No. CF-Y7 series

Introduction.................................................2

Read Me First ..............................................3

Description of Parts .....................................11

First-time Operation .....................................13

On-screen Manual.......................................18

Handling and Maintenance.............................19

Expanding Memory......................................22

Hard Disk Backup/Restore Function ..................24

Hard Disk Data Erase Utility ...........................25

Reinstalling Software....................................26

Troubleshooting (Basic)/Error Code/Message.......28

Hardware Diagnostics...................................32

LIMITED USE LICENSE AGREEMENT..............34

Specifications ............................................36

LIMITED WARRANTY ..................................39

For further information about the com-

puter, you can refer to the on-screen

manual.

To access the on-screen manual

 page 18 “On-screen Manual”

For your technical support office, refer to

“LIMITED WARRANTY.”

Getting StartedUseful InformationTroubleshootingAppendix

Introduction

Thank you for purchasing this Panasonic computer. For optimum performance and safety, please read these instruc-

tions carefully.

 Terms and illustrations in these instructions

 Some illustrations are simplified to help your understanding and may look different from the actual unit.

 If you do not log on as an administrator, you cannot use some functions or cannot display some screens.

 Refer for the latest information about optional products to the catalogs, etc.

 In these instructions, the names and terms are referred as follows.

• “Windows Vista

Business” as “Windows” or “Windows Vista”

• “WinDVD™ 8 (OEM Version)” as “WinDVD”

• “B’s Recorder GOLD9 BASIC” as “B’s Recorder”

• “B’s CLiP 7” as “B’s CLiP”

 The display modes are referred as follows. ( ) indicates the terms in [Intel

Graphics Media Accelerator Driver for

mobile] screen. To display the screen, right-click the desktop and click [Graphics Properties].

• Internal LCD (Notebook): The computer’s display

• External display (Monitor): External display

• Simultaneous display (Intel (R) Dual Display Clone): The same screen is displayed on the internal LCD and the

external display.

• Extended Desktop: The extended working area across the internal LCD and the external display.

 Copyright

be reproduced in any form without the prior written permission of Matsushita Electric Industrial Co., Ltd.

No patent liability is assumed with respect to the use of the information contained herein.

 Disclaimer

Computer specifications and manuals are subject to change without notice. Matsushita Electric Industrial Co., Ltd.

assumes no liability for damage incurred directly or indirectly from errors, omissions or discrepancies between the com-

puter and the manuals.

 Trademarks

Microsoft

, Windows

, Windows Vista and the Windows logo are registered trademarks of Microsoft Corporation of the

United States and/or other countries.

Intel, Core and Centrino are either registered trademarks or trademarks of Intel Corporation.

SDHC Logo is a trademark.

Adobe, the Adobe logo and Adobe Reader are either registered trademarks or trademarks of Adobe Systems Incorpo-

rated in the United States and/or other countries.

PhoenixBIOS, Phoenix Always and Recover Pro are trademarks and/or registered trademarks of Phoenix Technologies

Ltd.

Bluetooth™ is a trademark owned by Bluetooth SIG, Inc., U.S.A. and licensed to Matsushita Electric Industrial Co., Ltd.

InterVideo, WinDVD™, the InterVideo logo, Ulead and the Corel logo are trademarks or registered trademarks of Corel

Corporation and/or its subsidiaries in Canada, the United States and/or other countries.

Computrace

is a registered trademark of Absolute

Software Corp.

Panasonic

is a registered trademark of Matsushita Electric Industrial Co., Ltd.

Names of products, brands, etc., appearing in this manual are trademarks or registered trademarks of their respective

own companies.

: Conditions that may result in minor or moderate injury.

: Useful and helpful information.

Enter

: Press [Enter] key.

: Press and hold [Fn] key, and then press [F5] key.

(Start) - [All Programs] : Click (Start), and then click [All Programs].

 : Page in these Operating Instructions.

 : Reference to the on-screen manuals.

CAUTION

NOTE

Getting StartedUseful InformationTroubleshootingAppendix

Read Me First

Federal Communications Commission Radio Fre-

quency Interference Statement

Note: This equipment has been tested and found to com-

ply with the limits for a Class B digital device, pursuant to

Part 15 of the FCC Rules. These limits are designed to

provide reasonable protection against harmful interfer-

ence in a residential installation. This equipment gener-

ates, uses and can radiate radio frequency energy and, if

not installed and used in accordance with the instructions,

may cause harmful interference to radio communications.

However, there is no guarantee that interference will not

occur in a particular installation. If this equipment does

cause harmful interference to radio or television recep-

tion, which can be determined by turning the equipment

off and on, the user is encouraged to try to correct the

interference by one or more of the following measures:

 Reorient or relocate the receiving antenna.

 Increase the separation between the equipment and

receiver.

 Connect the equipment into an outlet on a circuit differ-

ent from that to which the receiver is connected.

 Consult the Panasonic Service Center or an experi-

enced radio/TV technician for help.

Warning

To assure continued compliance, use only shielded inter-

face cables when connecting to a computer or peripheral.

Also, any changes or modifications not expressly

approved by the party responsible for compliance could

void the user’s authority to operate this equipment.

6-M-1

FCC RF Exposure Warning:

 This computer is provided with a PC Card slot that could

be used with wireless transmitter(s), which will be spe-

cifically recommended, when they become available.

Other third-party wireless transmitter(s) have not been

RF exposure evaluated for use with this computer and

may not comply with FCC RF exposure requirements.

 This equipment complies with FCC radiation exposure

limits set forth for an uncontrolled environment.

 This equipment must be installed and operated in

accordance with provided instructions and minimum

1.5 cm spacing must be provided between antenna

and all person’s body (excluding extremities of hands,

wrist and feet) during wireless modes of operation.

 This transmitter must not be co-located or operated in

conjunction with any other antenna or transmitter.

25-M-2-3

This product is restricted to indoor use due to its operation

in the 5.15 to 5.25 GHz frequency range.

FCC requires this product to be used indoors for the fre-

quency range 5.15 to 5.25 GHz to reduce the potential for

harmful interference to co-channel Mobile Satellite sys-

tems.

High power radars are allocated as primary users of the

5.25 to 5.35 GHz and 5.65 to 5.85 GHz bands. These

radar stations can cause interference with and /or dam-

age this product.

25-M-W-1

This device complies with Part 15 of the FCC Rules.

Operation is subject to the following two conditions:

(1)This device may not cause harmful interference, and

(2)

This device must accept any interference received, includ-

ing interference that may cause undesired operation.

Responsible Party: Panasonic Corporation of North America

One Panasonic Way

Secaucus, NJ 07094

Tel No:1-800-LAPTOP5 (1-800-527-8675)

6-M-1

FCC Regulation Notice for modem

This equipment contains a FCC approved modem.

1. This equipment complies with CFR47 Part 68 rules.

On the computer is a label that contains, among other

information, the FCC registration number and ringer

equivalence number (REN) for this equipment. If

required, this information must be provided to the tele-

phone company.

2. An FCC compliant telephone cord and modular plug is

provided with this equipment. This equipment is

designed to be connected to the telephone network or

premises wiring using a compatible modular jack

which is Part 68 compliant. See Installation Instruc-

tions for details.

3. The REN is used to determine the quantity of devices

which may be connected to the telephone line. Exces-

sive RENs on the telephone line may result in the

devices not ringing in response to an incoming call. In

most, but not all area, the sum of RENs should not

exceed five (5.0). To be certain of the number of

devices that may be connected to a line, as deter-

mined by the total RENs, contact the local telephone

company.

4. If your telephone equipment cause harm to the tele-

phone network, the telephone company will notify you

in advice that temporary discontinuance of service

may be required. But if advice notice isn’t practical, the

telephone company will notify the customer as soon as

possible. Also, you will be advised of your right to file a

complaint with the FCC if you believe it is necessary.

5. The telephone company may take changes in its facili-

ties, equipment, operations or procedures that could

affect the operation of the equipment. If this happens

the telephone company will provide advance notice in

order for you to make necessary modifications to

maintain uninterrupted service.

6. If trouble is experienced with this equipment, for repair

or warranty information, please contact Panasonic

Corporation of North America at DIAL TOLL FREE 1-

800-LAPTOP5 (1-800-527-8675). If the equipment is

causing harm to the telephone network, the telephone

company may request that you disconnect the equip-

ment until the problem is resolved.

7. There are no user serviceable parts contained in this

equipment.

Models for U.S.A.

Read Me First

Getting StartedUseful InformationTroubleshootingAppendix

8. This equipment may not be used on coin service pro-

vided by the telephone company. Connection to party

lines is subject to state tariffs.

9. The Telephone Consumer Protection Act of 1991

makes it unlawful for any person to use a computer or

other electronic device to send any message via a

telephone fax machine unless such message clearly

contains in a margin at the top or bottom of each trans-

mitted page or on the first page of the transmission,

the date and time it is sent and an identification of the

business or other entry, or other individual sending the

message and the telephone number of the sending

machine or such business, other entity, or individual. In

order to program this information into your fax soft-

ware, you should refer to the manual of the Fax soft-

ware being used.

10.According to the FCC’s electrical safety advisory, we

recommend that you may install an AC surge arrestor

in the AC outlet to which this equipment is connected.

Telephone companies report that electrical surges,

typically lightning transients, are very destructive to

customer terminal equipment connected to AC power

sources and that this is a major nationwide problem.

“Caution : To reduce the risk of fire, use only No.26 AWG or

larger telecommunication line cord.”

“ATTENTION : Pour réduire le risque d’incendie, utiliser

uniquement des conducteurs de télécommunications 26

AWG ou de section supérieure.”

16-M-1

Notice for the products using LCD

This product has a fluorescent lamp that contains mer-

cury. Disposal may be regulated in your community due to

environmental considerations.

For disposal or recycling information, please contact your

local authorities, or the Electronic Industries Alliance:

<http://www.eiae.org/>

24-M-1

This product contains a CR Coin Cell Lithium Battery

which contains Perchlorate Material- special handling

may apply.

See http://www.dtsc.ca.gov/hazardouswaste/perchlorate/

38-M-1

The following safety precautions must be observed during all phases of the operation, usage, service or repair of any

Personal Computer or Handheld Computer incorporating Wireless WAN. Manufacturers of the cellular terminal are

advised to convey the following safety information to users and operating personnel and to incorporate these guidelines

into all manuals supplied with the product. Failure to comply with these precautions violates safety standards of design,

manufacture and intended use of the product. Panasonic assumes no liability for customer failure to comply with these

precautions.

When in a hospital or other health care facility, observe the restrictions on the use of mobiles. Switch

Personal Computer or Handheld Computer incorporating Wireless WAN off, if instructed to do so by the

guidelines posted in sensitive areas. Medical equipment may be sensitive to RF energy. The operation of

cardiac pacemakers, other implanted medical equipment and hearing aids can be affected by interference

from Personal Computer or Handheld Computer incorporating Wireless WAN placed close to the device. If in

doubt about potential danger, contact the physician or the manufacturer of the device to verify that the

equipment is properly shielded. Pacemaker patients are advised to keep their Personal Computer or

Handheld Computer incorporating Wireless WAN away from the pacemaker, while it is on.

Switch off Personal Computer or Handheld Computer incorporating Wireless WAN before boarding an

aircraft. Make sure it cannot be switched on inadvertently. The operation of wireless appliances in an aircraft

is forbidden to prevent interference with communications systems. Failure to observe these instructions may

lead to the suspension or denial of cellular services to the offender, legal action, or both.

Do not operate Personal Computer or Handheld Computer incorporating Wireless WAN in the presence of

flammable gases or fumes. Switch off the cellular terminal when you are near petrol stations, fuel depots,

chemical plants or where blasting operations are in progress. Operation of any electrical equipment in

potentially explosive atmospheres can constitute a safety hazard.

Your Personal Computer or Handheld Computer incorporating Wireless WAN receives and transmits radio

frequency energy while switched on. Remember that interference can occur if it is used close to TV sets,

radios, computers or inadequately shielded equipment. Follow any special regulations and always switch off

Personal Computer or Handheld Computer incorporating Wireless WAN wherever forbidden, or when you

suspect that it may cause interference or danger.

Road safety comes first! Do not use a Personal Computer or Handheld Computer incorporating Wireless

WAN while driving a vehicle. Do not place the computer with Wireless WAN in an area where it could cause

personal injury to the driver or passengers. It is recommended to stow the unit in the boot or secure stowage

area while driving. Do not place the computer with Wireless WAN in an area over an air bag or in the vicinity

where an air bag may deploy. Air bags inflate with great force and if the computer with Wireless WAN is

placed in the air bag deployment area may be propelled with great force and cause serious injury to

occupants of the vehicle.

Safety Precautions

Getting StartedUseful InformationTroubleshootingAppendix

IMPORTANT!

Personal Computer or Handheld Computer incorporating Wireless WAN operate using radio signals and

cellular networks cannot be guaranteed to connect in all conditions. Therefore, you should never rely solely

upon any wireless device for essential communications, for example emergency calls.

Remember, in order to make or receive calls, Personal Computer or Handheld Computer incorporating

Wireless WAN must be switched on and in a service area with adequate cellular signal strength.

Some networks do not allow for emergency calls if certain network services or phone features are in use (e.g.

lock functions, fixed dialing etc.). You may need to deactivate those features before you can make an

emergency call.

Some networks require that a valid SIM card be properly inserted in Personal Computer or Handheld

Computer incorporating Wireless WAN.

27-1-2

Industry Canada (IC) Notice for modem

This equipment contains an Industry Canada approved

modem unit.

The Industry Canada label is affixed on the modem unit.

EQUIPMENT ATTACHEMENT LIMITATIONS

“NOTICE: The Industry Canada label identifies certified equip-

ment. This certification means that the equipment meets tele-

communications network protective, operational and safety

requirements as prescribed in the appropriate Terminal Equip-

ment Technical Requirements document(s). The Department

does not guarantee the equipment will operate to the user’s

satisfaction.

Before installing this equipment, users should ensure that it is

permissible to be connected to the facilities of the local tele-

communications company. The equipment must also be

installed using an acceptable method of connection. The cus-

tomer should be aware that compliance with the above condi-

tions may not prevent degradation of service in some

situations.

Repairs to certified equipment should be coordinated by a rep-

resentative designated by the supplier. Any repairs or alter-

ations made by the user to this equipment, or equipment

malfunctions, may give the telecommunications company

cause to request the user to disconnect the equipment.

Users should ensure for their own protection that the electrical

ground connections of the power utility, telephone lines and

internal metallic water pipe system, if present, are connected

together. This precaution may be particularly important in rural

areas. Caution: Users should not attempt to make such con-

nections themselves, but should contact the appropriate elec-

tric inspection authority, or electrician, as appropriate.”

“NOTICE: The Ringer Equivalence Number (REN) assigned to

each terminal device provides an indication of the maximum

number of terminals allowed to be connected to a telephone

interface. The termination on an interface may consist of any

combination of devices subject only to the requirement that the

sum of the Ringer Equivalence Numbers of all the devices

does not exceed 5.”

REN: See bottom of the computer

RESTRICTIONS CONCERNANT LE RACCORDEMENT

DE MATÉRIEL

“AVIS: L’étiquette d’Industrie Canada identifie le matériel

homologué. Cette étiquette certifie que le matériel est con-

forme aux normes de protection, d’exploitation et de sécurité

des réseaux de télécommunications, comme le prescrivent les

documents concernant les exigences techniques relatives au

matériel terminal. Le Ministère n’assure toutefois pas que le

matériel fonctionnera à la satisfaction de l’utilisateur.

Avant d’installer ce matériel, l’utilisateur doit s’assurer qu’il est

permis de le raccorder aux installations de l’entreprise locale

de télécommunication. Le matériel doit également être installé

en suivant une méthode acceptée de raccordement.

L’abonné ne doit pas oublier qu’il est possible que la confor-

mité aux conditions énoncées ci-dessus n’empêche pas la

dégradation du service dans certaines situations.

Les réparations de matériel homologué doivent être coordon-

nées par un représentant désigné par le fournisseur.

L’entreprise de télécommunications peut demander à l’utili-

sateur de débrancher un appareil à la suite de réparations ou

de modifications effectuées par l’utilisateur ou à cause de

mauvais fonctionnement.

Pour sa propre protection, l’utilisateur doit s’assurer que tous

les fils de mise à la terre de la source d’énergie électrique, des

lignes téléphoniques et des canalisations d’eau métalliques,

s’il y en a, sont raccordés ensemble. Cette précaution est par-

ticulièrement importante dans les régions rurales. Avertisse-

ment: L’utilisateur ne doit pas tenter de faire ces

raccordements lui-même; il doit avoir recours à un service

d’inspection des installations électriques, ou à un électricien,

selon le cas.”

“AVIS: L’indice d’équivalence de la sonnerie (IES) assigné à

chaque dispositif terminal indique le nombre maximal de ter-

minaux qui peuvent être raccordés à une interface. La termi-

naison d’une interface téléphonique peut consister en une

combinaison de quelques dispositifs, à la seule condition que

la somme d’indices d’équivalence de la sonnerie de touts les

dispositifs n’excède pas 5.”

IES: Voir sous le fond de l’ordinateur

17-Ca-1

Models for Canada

Read Me First

Getting StartedUseful InformationTroubleshootingAppendix

Canadian ICES-003

This Class B digital apparatus complies with Canadian

ICES-003.

Cet appareil numérique de la classe B est conforme à la

norme NMB-003 du Canada.

7-M-2

Industry Canada

This product complies with RSS210 Industry Canada.

Operation is subject to the following two conditions;

(1) this device may not cause interference, and

(2) this device must accept any interference, including

interference that may cause undesired operation of

the device.

30-Ca-1-1

This product (local network devices) for the band 5150-

5250 MHz is only indoor usage to reduce potential for

harmful interference to co-channel Mobile Satellite sys-

tems.

High power radars are allocated as primary users (mean-

ing they have priority) of 5250-5350 MHz and 5650-5850

MHz and these radars could cause interference and/or

damage to LELAN devices.

30-Ca-2-1

Declaration of Conformity (DoC)

“Hereby, we declare that this Personal Computer is in compliance with the essential requirements

and other relevant provisions of the Directive 1999/5/EC.”

Hint:

If you want to get a copy of the original DoC of our products which relates to the R&TTE, please con-

tact our web address: http://www.doc.panasonic.de

Contact:

Panasonic Services Europe

A Division of Panasonic Marketing Europe GmbH

Panasonic Testing Centre

Network connection.

The terminal equipment is intended for connection to the following public network;

In all the countries of European Economical Area;

- Public Switched Telephony Networks

Technical Features.

The terminal equipment includes the following features;

- DTMF dialing

- Maximum bitrate receiving mode: 56 kbit/s

- Maximum bitrate sending mode: 33.6 kbit/s

This product is designed to interwork with the Public Switched Telecommunication Networks in UK, Ireland, Nether-

lands, Sweden, Denmark, Finland, Switzerland, Luxembourg, Belgium, France, Germany, Spain, Portugal, Iceland,

Greece, Italy, Norway, Austria, Poland, Hungary, Czech, Slovakia, Slovenia, Estonia, Latvia, Lithuania, Cyprus, Malta,

Romania, Bulgaria and Liechtenstein.

18-E-1

Models for Europe

Getting StartedUseful InformationTroubleshootingAppendix

When using your telephone equipment, basic safety pre-

cautions should always be followed to reduce the risk of

fire, electric shock and injury to persons, including the fol-

lowing:

1. Do not use this product near water, for example, near

a bath tub, wash bowl, kitchen sink or laundry tub, in a

wet basement or near a swimming pool.

2. Avoid using a telephone (other than a cordless type)

during an electrical storm. There may be a remote risk

of electric shock from lightning.

3. Do not use the telephone to report a gas leak in the

vicinity of the leak.

4. Use only the power cord and batteries indicated in this

manual. Do not dispose of batteries in a fire. They may

explode. Check with local codes for possible special

disposal instructions.

SAVE THESE INSTRUCTIONS

19-E-1

Certaines mesures de sécurité doivent être prises pen-

dant l’utilisation de matérial téléphonique afin de réduire

les risques d’incendie, de choc électrique et de blessures.

En voici quelquesunes:

1. Ne pas utiliser l’appareil près de l’eau, p.ex., près d’une

baignoire, d’un lavabo, d’un évier de cuisine, d’un bac à

laver, dans un sous-sol humide ou près d’une piscine.

2. Éviter d’utiliser le téléphone (sauf s’il s’agit d’un appareil

sans fil) pendant un orage électrique. Ceci peut présenter

un risque de choc électrique causé par la foudre.

3. Ne pas utiliser l’appareil téléphonique pour signaler

une fuite de gaz s’il est situé près de la fuite.

4. Utiliser seulement le cordon d’alimentation et le type de

piles indiqués dans ce manual. Ne pas jeter les piles

dans le feu: elles peuvent exploser. Se conformer aux

règlements pertinents quant à l’élimination des piles.

CONSERVER CES INSTRUCTIONS

19-F-1

This product and your Health

This product, like other radio devices, emits radio fre-

quency electromagnetic energy. The level of energy emit-

ted by this product however is far much less than the

electromagnetic energy emitted by wireless devices like

for example mobile phones.

Because this product operates within the guidelines found

in radio frequency safety standards and recommenda-

tions, we believe this product is safe for use by consum-

ers. These standards and recommendations reflect the

consensus of the scientific community and result from

deliberations of panels and committees of scientists who

continually review and interpret the extensive research lit-

erature.

In some situations or environments, the use of this prod-

uct may be restricted by the proprietor of the building or

responsible representatives of the organization. These sit-

uations may for example include:

 Using this product on board of airplanes, or

 In any other environment where the risk of interference

to other devices or services is perceived or identified

as harmful.

If you are uncertain of the policy that applies on the use of

wireless devices in a specific organization or environment

(e.g. airports), you are encouraged to ask for authoriza-

tion to use this product prior to turning on the product.

Regulatory Information

We are not responsible for any radio or television interfer-

ence caused by unauthorized modification of this product.

The correction of interference caused by such unautho-

rized modification will be the responsibility of the user. We

and its authorized resellers or distributors are not liable for

damage or violation of government regulations that may

arise from failing to comply with these guidelines.

26-M-1

Lithium Battery!

This computer contains a lithium battery to enable the

date, time, and other data to be stored. The battery should

only be exchanged by authorized service personnel.

Warning! A risk of explosion from incorrect installation or

misapplication may possibly occur.

15-E-1

Pile au lithium!

Le micro-ordinateur renferme une pile au lithium qui per-

met de sauvegarder certaines données, notamment la

date et l’heure. La pile ne doit être remplacée que par un

technicien qualifié.

Danger ! Risque d’explosion en cas de non respect de

cette mise en garde!

15-F-1

Important Safety Instructions / Importantes Mesures De Sécurité

Information to the User

Lithium Battery / Pile au lithium

Read Me First

Getting StartedUseful InformationTroubleshootingAppendix

CAUTION!

THIS PRODUCT UTILIZES A LASER.

USE OF CONTROLS, ADJUSTMENTS OR PERFORMANCE OF

PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN

MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.

DO NOT OPEN COVERS AND DO NOT REPAIR YOURSELF.

REFER SERVICING TO QUALIFIED PERSONNEL.

12-E-1

AVERTISSEMENT!

CET APPAREIL UTILISE UN LASER.

L’UTILISATION DE COMMANDES OU DE RÉGLAGES OU L’EXÉCU-

TION DE PROCÉDURES AUTRES QUE CELLES SPÉCIFIÉES ICI PEU-

VENT PROVOQUER UNE EXPOSITION À DES RADIATIONS

DANGEREUSES.

NE PAS OUVRIR LES COUVERCLES NI ESSAYER DE RÉPARER

SOIMÊME.

CONFIER TOUT TRAVAIL D’ENTRETIEN À UN PERSONNEL QUALIFIÉ.

12-F-1

12-1-1

Information on Disposal in other Countries outside the European Union

This symbol is only valid in the European Union.

If you wish to discard this product, please contact your local authorities or dealer and ask for the correct

method of disposal.

36-M-1

This computer is not intended for use in medical equip-

ment including life-support systems, air traffic control sys-

tems, or other equipment, devices or systems that are

involved with ensuring human life or safety. Panasonic

cannot be held responsible in any way for any damages

or loss resulting from the use of this computer in these

types of equipment, devices or systems, etc.

If a Malfunction Occurs, Immediately Unplug the AC

Plug and the Battery Pack

• This product is damaged

• Foreign object inside this product

• Smoke emitted

• Unusual smell emitted

• Unusually hot

Continuing to use this product while any of the above con-

ditions are present may result in fire or electric shock.

•I

f a malfunction occurs, immediately turn the power off and

unplug the AC plug, and then remove the battery pack.

Then contact your technical support office.

Do Not Touch This Product and Cable When It Starts

Thundering

Electric shock may result.

Do Not Connect the AC Adaptor to a Power Source

Other Than a Standard Household AC Outlet

Otherwise, a fire due to overheating may result. Connect-

ing to a DC/AC converter (inverter) may damage the AC

adaptor. On an airplane, only connect the AC adaptor/

charger to an AC outlet specifically approved for such use.

Do Not Do Anything That May Damage the AC Cord,

the AC Plug, or the AC Adaptor

Do not damage or modify the cord, place it near hot tools, bend,

twist, or pull it forcefully, place heavy objects on it, or bundle it tightly.

Continuing to use a damaged cord may result in fire, short circuit, or

electric shock.

CD/DVD Drive Caution

Information on Disposal for Users of Waste Electrical & Electronic Equipment (private

households)

Precautions

THIS PRODUCT IS NOT INTENDED FOR USE AS, OR AS

PART OF, NUCLEAR EQUIPMENT/SYSTEMS, AIR TRAF-

FIC CONTROL EQUIPMENT/SYSTEMS, OR AIRCRAFT

COCKPIT EQUIPMENT/SYSTEMS

. PANASONIC WILL

NOT BE RESPONSIBLE FOR ANY LIABILITY RESULTING

FROM THE USE OF THIS PRODUCT ARISING OUT OF

THE FOREGOING USES.

AIRCRAFT COCKPIT EQUIPMENT/SYSTEMS include Class2

Electrical Flight Bag (EFB) Systems and Class1 EFB Systems

when used during critical phases of flight (e.g., during take-off and

landing) and/or mounted on to the aircraft. Class1 EFB Systems

and 2 EFB Systems are defined by FAA: AC (Advisory Circular)

120-76A or JAA: JAA TGL (Temporary Guidance Leaflets) No.36.

Panasonic cannot guarantee any specifications, tech-

nologies, reliability, safety (e.g. Flammability/Smoke/

Toxicity/Radio Frequency Emission, etc) requirements

related to aviation standards that exceed the specifica-

tions of our COTS (Commercial-Off-The-Shelf) prod-

ucts.

Getting StartedUseful InformationTroubleshootingAppendix

Do Not Pull or Insert the AC Plug If Your Hands Are Wet

Electric shock may result.

Clean Dust and Other Debris of the AC Plug Regularly

If dust or other debris accumulates on the plug, humidity, etc.

may cause a defect in the insulation, which may result in a fire.

• Pull the plug, and wipe it with a dry cloth.

Pull the plug if the computer is not being used for a long

period of time.

Insert the AC Plug Completely

If the plug is not inserted completely, fire due to overheat-

ing or electric shock may result.

• Do not use a damaged plug or loose AC outlet.

Do Not Place Containers of Liquid or Metal Objects on

Top of the Product

If water or other liquid spills, or if paper clips, coins, or foreign

matter get inside this product, fire or electric shock may result.

• If water spills in the keyboard, refer to page 21. If other for-

eign matter has found its way inside, immediately turn the

power off and unplug the AC plug and remove the battery

pack. Then contact your technical support office.

Do Not Disassemble This Product

There are high-voltage areas inside which may give you

an electric shock if you should touch them. Do not touch

the pins and circuit boards inside, and do not allow foreign

matter to enter inside.

Also, remodeling or disassembly may cause a fire.

Keep SD Memory Cards Away from Infants and Small

Children

Accidental swallowing will result in bodily injury.

In the event of accidental swallowing, see a doctor imme-

diately.

Do Not Place This Product on Unstable Surfaces

If balance is lost, this product may fall over or drop, result-

ing in an injury.

Avoid Stacking

If balance is lost, this product may fall over or drop, result-

ing in an injury.

Do Not Keep This Product Wherever There is a Lot of

Water, Moisture, Steam, Dust, Oily Vapors, etc.

Otherwise, possibly resulting in fire or electric shock.

Do Not Leave This Product in High Temperature Envi-

ronment Such as in a Sun-Heated Car, for a Long

Period of Time

Leaving this product where it will be exposed to extremely

high temperatures such as in a sun-heated car or in direct

sunlight may deform the cabinet and/or cause trouble in the

internal parts. Continued use in such a resulting condition

may lead to short-circuiting or insulation defects, etc. which

may in turn lead to a fire or electric shocks.

Do Not Block the Ventilation Hole

Otherwise, heat will build up inside, possibly resulting in a

fire.

Hold the Plug When Unplugging the AC Plug

Pulling on the cord may damage the cord, resulting in a

fire or electric shock.

Do Not Move This Product While the AC Plug Is Connected

The AC cord may be damaged, resulting in fire or electric shock.

• If the AC cord is damaged, unplug the AC plug immediately.

Use Only the Specified AC Adaptor With This Product

Using an AC adaptor other than the one supplied

(attached to your product or supplied by Panasonic) may

result in a fire.

Do Not Subject the AC Adaptor to Any Strong Impact

Using the AC adaptor after a strong impact such as being

dropped may result in electric shock, short circuit, or fire.

Take a Break of 10-15 Minutes Every Hour

Using this product for long periods of time may have detri-

mental health effects on the eyes or hands.

Do Not Look into the CD/DVD Drive

Looking directly at the internal laser light source may

result in damage to eyesight.

Do Not Use Discs That Are Cracked or Deformed

Because the discs rotate at high speeds, damaged discs

may break apart causing injury.

• Discs that are not round and discs that have been

repaired using adhesives are similarly dangerous, and

so should not be used.

Do Not Turn the Volume Up to Loud When Using

Headphones

Listening at high volumes that overstimulate the ear for

long periods of time may result in loss of hearing.

Use the Modem with a Regular Telephone Line

Connection to an internal phone line (on-premise

switches) of a company or business office, etc. or to a dig-

ital public phone or use in a country or area not supported

by the computer may result in a fire or electric shocks.

Do Not Connect a Telephone Line, or a Network Cable

Other Than the One Specified, into the LAN Port

If the LAN port is connected to a network such as the

ones listed below, a fire or electric shock may result.

• Networks other than 1000BASE-T, 100BASE-TX or

10BASE-T

• Phone lines (IP phone (Internet Protocol Telephone),

Telephone lines, internal phone lines (on-premise

switches), digital public phones, etc.)

Do Not Use with Exposing the Skin to This Product

for a Long Period of Time

Using this product with exposing the skin to the heat

source of this product or AC adaptor for a long period of

time can cause a low-temperature burn.

 Do not place the computer near a television or radio

receiver.

 Keep the computer away from magnets. Data stored

on the hard disk may be lost.

Read Me First

Getting StartedUseful InformationTroubleshootingAppendix

Do Not Use with Any Other Product

The battery pack is rechargeable and was intended for

the specified product. If it is used with a product other

than the one for which it was designed, electrolyte leak-

age, generation of heat, ignition or rupture may result.

Do Not Charge the Battery Using Methods Other Than

Those Specified

If the battery pack is not charged using one of the speci-

fied methods, electrolyte leakage, generation of heat, igni-

tion or rupture may result.

Do Not Throw the Battery Pack into a Fire or Expose It

to Excessive Heat

Generation of heat, ignition or rupture may result.

Avoid Extreme Heat (Near the Fire, in Direct Sunlight,

for Example)

Electrolyte leakage, generation of heat, ignition or rupture

may result.

Do Not Insert Sharp Objects into the Battery Pack,

Expose It to Bumps or Shocks, Disassemble, or Mod-

ify It

Electrolyte leakage, generation of heat, ignition or rupture

may result.

Do Not Short the Positive (+) and Negative (-) Con-

tacts

Generation of heat, ignition or rupture may result. Do not

place the battery pack together with articles such as neck-

laces or hairpins when carrying or storing.

Do Not Use This Product with a Battery Pack Other

Than the One Specified

Use only the specified battery pack (CF-VZSU45) with

your product. Use of battery packs other than those man-

ufactured and supplied by Panasonic may present a

safety hazard (generation of heat, ignition or rupture).

 Do not touch the terminals on the battery pack. The

battery pack may no longer function properly if the

contacts are dirty or damaged.

 Do not expose the battery pack to water, or allow it to

become wet.

 If the battery pack will not be used for a long period of

time (a month or more), charge or discharge (use) the

battery pack until the remaining battery level becomes

30% to 40% and store it in a cool, dry place.

 This computer prevents overcharging of the battery by

recharging only when the remaining power is less than

approx. 95% (when Economy Mode (ECO) is enabled:

75%) of capacity.

 The battery pack is not charged when the computer is

first purchased. Be sure to charge it before using it for

the first time. When the AC adaptor is connected to

the computer, charging begins automatically.

 Should the battery leak and the fluid get into your

eyes, do not rub your eyes. Immediately flush your

eyes with clear water and see a doctor for medical

treatment as soon as possible.

NOTE

 The battery pack may become warm during

recharging or normal use. This is completely nor-

mal.

 Recharging will not commence if internal tempera-

ture of the battery pack is outside of the allowable

temperature range (0 °C to 55 °C {32 °F to 131

°F}). ( Reference Manual “Battery Power”)

Once the allowable range requirement is satisfied,

charging begins automatically. Note that the

recharging time varies based on the usage condi-

tions. (Recharging takes longer than usual when

the temperature is 10 °C {50 °F} or below.)

 If the temperature is low, the operating time is

shortened. Only use the computer within the

allowable temperature range.

 The battery pack is a consumable item. If the

amount of time the computer can be run by using a

particular battery pack becomes dramatically

shorter and repeated recharging does not restore

its performance, the battery pack should be

replaced with a new one.

 When transporting a spare battery inside a pack-

age, briefcase, etc., it is recommended that it be

placed in a plastic bag so that its contacts are pro-

tected.

 Always power off the computer when it is not in

use. Leaving the computer on when the AC adap-

tor is not connected will exhaust the remaining bat-

tery capacity.

Precautions (Battery Pack)

A lithium ion battery that is recy-

clable powers the product you

have purchased.

Please call 1-800-8-BATTERY

for information on how to recycle

this battery.

L’appareil que vous vous êtes

procuré est alimenté par une bat-

terie au lithium-ion.

Pour des renseignements sur le

recyclage de la batterie, veuillez

composer le 1-800-8-BATTERY.

48-M-1

Getting StartedUseful InformationTroubleshootingAppendix

Description of Parts

A :Speakers

B :Function Key

 Reference Manual “Key Combinations”

C :Keyboard

D :LED Indicator

: Caps lock

: Numeric key (NumLk)

: Scroll lock (ScrLk)

: Hard disk drive status

ECO

: Economy Mode (ECO) status

 Reference Manual “Battery Power”

: Battery status

 Reference Manual “Battery Power”

E : Power Switch

 page 14

Power Indicator

• Off: Power off/Hibernation

•Green: Power on

• Blinking green: Sleep

F : Wireless Switch

Switch the wireless devices to on (right side) or to off

(left side).

 Reference Manual “Disabling/Enabling Wire-

less Communication”

G :Latch

When closing the display, press down firmly from

above until the latch is firmly closed (locked).

H :CD/DVD Drive

 Reference Manual “CD/DVD Drive”

CAUTION

When closing the disc

cover, press down near the

drive power/open switch

(position of the arrow) to

ensure that the cover is

locked.

I : CD/DVD Drive Power/Open Switch

• Slide the switch to the right to open the disc cover.

• Slide the switch to the left to turn on/off the drive

power.

CD/DVD Drive Indicator

• Off: Drive power is off.

• Green: Drive power is on, but the drive is not

accessed.

• Blinking green: Drive power is on, and the drive is

being accessed.

J : LCD

K :LAN Port

If the Mini Port Replicator is connected to the com-

puter, connect the LAN cable to the LAN port on the

Mini Port Replicator. You cannot use the LAN port on

the computer.

 Reference Manual “LAN”

L : Modem Port

• Be sure to use the included modem telephone cable,

and insert the ferrite core side of modem telephone

cable into the modem port on the computer

• Do not move/remove the ferrite core of modem tele-

phone cable.

 Reference Manual “Modem”

M :USB Ports

 Reference Manual “USB Devices”

N :Security Lock

You can connect a Kensington cable. Refer to the

instruction manual of the cable. The security lock and

cable is a theft prevention device. Matsushita Electric

Industrial Co., Ltd. will bear no responsibility in the

event of theft.

90 mm {3.5 "} or less

Description of Parts

Getting StartedUseful InformationTroubleshootingAppendix

EXT.

A :DC-IN Jack

B :Ventilation Hole

C :External Display Port

If the Mini Port Replicator is connected to the com-

puter, connect the external display to the external dis-

play port on the Mini Port Replicator. You cannot use

the external display port on the computer.

 Reference Manual “External Display”

D :Mini Port Replicator Connector

Connect the Mini Port Replicator (optional).

 Reference Manual “Mini Port Replicator”

E : Microphone Jack

A condenser microphone can be used. If other types

of microphones are used, audio input may not be pos-

sible, or malfunctions may occur.

F : Headphone Jack

You can connect headphones or amplified speakers.

When they are connected, audio from the internal

speakers is not heard.

G :SD Memory Card Slot

 Reference Manual “SD/SDHC Memory Card”

H :Bluetooth Antenna

 Supplementary Instructions of Bluetooth

I : Wireless LAN Antenna

 Reference Manual “Wireless LAN”

J : Touch Pad

 Reference Manual “Using the Touch Pad”

K :PC Card Slot

 Reference Manual “PC Cards”

L : SD Memory Card Indicator

Blinking: During access

M :Battery Latches

 page 13

N :Battery Pack

For information on how to insert/remove the battery

pack, refer to Reference Manual “Battery Power”.

O :Emergency Hole

 Reference Manual “CD/DVD Drive”

P : RAM Module Slot

 page 22

For model with EVDO or without wireless WAN:

The SIM card slot under this cover is not used for this model. Do not open the cover.

For other models:

Refer to the additional instructions.

Wireless WAN Antenna

Getting StartedUseful InformationTroubleshootingAppendix

First-time Operation

 Preparation

A Check and identify the supplied accessories.

If you do not find the described accessories, contact your technical support office.

 You will need the serial number when you reinstall B’s Recorder or install B’s CLiP ( page 30).

B Read the LIMITED USE LICENSE AGREEMENT before breaking the seal on the computer’s packaging

( page 34).

A Turn the computer over and slide the left latch (A) to the unlocked position

().

B Insert the battery pack in the correct direction until it securely fits the connector.

C Slide the left latch (A) to the locked position ( ).

(Right latch is locked automatically.)

CAUTION

 Make sure the latches are securely locked. Otherwise the battery pack may fall

when you carry the computer.

 Do not touch the terminals of the battery pack and the computer. Doing so can

make the terminals dirty or damaged, and may cause malfunction of the battery

pack and the computer.

A Press and hold the latch (B) located at the front.

• Be careful not to press the SIM card slot cover (C) by mistake.

B Lift open the display.

CAUTION

 Do not open the display wider than necessary (140° or more), and do not apply

excessive pressure to the LCD. Do not open or close the computer holding the

edge of the LCD segment.

The battery charging starts automatically.

CAUTION

 Do not disconnect the AC adaptor and do not switch the wireless switch to

on until the first-time operation procedure is completed.

 When using the computer for the first time, do not connect any peripheral device

except the battery pack and AC adaptor.

 Handling the AC adaptor

• Problems such as sudden voltage drops may arise during periods of thunder

and lightning. Since this could adversely affect your computer, an uninterrupt-

ible power source (UPS) is highly recommended unless running from the bat-

tery pack alone.

• AC Adaptor . . . . 1

Model No: CF-AA1633A

• AC Cord . . . . . . 1 • Battery Pack . . .1

Model No: CF-VZSU45

• Modem Telephone

Cable . . . . . . . . . 1

• Operating Instructions (This book) . . 1

• Product Recovery DVD-ROM. . . . . . . 1

• Windows

Book . . . . . . . . . . . . . . . . . 1

1 Insert the battery pack.

2 Open the display.

3 Connect your computer to a power outlet.

First-time Operation

Getting StartedUseful InformationTroubleshootingAppendix

Slide and hold the power switch for approximately one second until the

power indicator lights.

CAUTION

 Do not slide the power switch repeatedly.

 The computer will forcibly be turned off if you slide and hold the power switch for

four seconds or longer.

 Once you turn off the computer, wait for ten seconds or more before you turn on

the computer again.



Do not perform the following operation until the hard disk drive indicator turns off.

• Connecting or disconnecting the AC adaptor

• Sliding the power switch or CD/DVD drive power/open switch

• Touching the keyboard or touch pad

• Closing the display

 Do not change the Setup Utility until completing step 5. If you do so, Windows

setup may not operate properly.

Follow the on-screen instructions.

 After turning on the computer, “Please wait a moment while Windows pre-

pares to start for the first time .........” appears, and then a small circle circu-

lates on the screen. This will take a few minutes.

 During setup of Windows, use the touch pad to move the cursor and to click

an item.

 Do not change the settings on the screen where you select a country or

region. You can set a country, region or keyboard layout in [Clock, Language,

and Region] of [Control Panel] after the Windows setup is complete.

 Setup of Windows will take approximately 20 minutes.

Go to the next step, confirming each message on the display.

CAUTION

 You cannot choose the following words for user name and password: CON,

PRN, AUX, CLOCK$, NUL, COM1 to COM9, LPT1 to LPT9.

 You can change the user name, password, image and security setting after

setup of Windows.

 Remember your password. If you forget the password, you cannot use the Win-

dows. Creating a password reset disk beforehand is recommended.

 Reference Manual “CD/DVD Drive”

NOTE

 PC Information Viewer

This computer periodically records the management information including the hard disk information such as number

of hours powered-on, number of times powered-on, internal temperature, replacement sector. The maximum data

volume for each record is 750 byte. These information are only used for estimating the cause when the hard disk

goes down by any possibility. They are never sent to outside via network nor used for any other purpose except for

the purpose described the above.

To disable the function, add the check mark for [Disable the automatic save function for management information

history] in [Hard Disk Status] of PC Information Viewer, and click [OK].

When you disable the function, information on how to use the hard disk is not displayed.

( Reference Manual “Check the Computer’s Usage Status” and Hard Disk Handling)

 If you hear the sounds from CD/DVD drive

In the following situations, the sounds from the CD/DVD drive can be heard.

• Immediately after the CD/DVD drive is turned on

• Just after turning on the computer with [DVD Drive Power] set to [On] in the Setup Utility

• When a CD or DVD is playing

The sounds you hear are normal operating sounds created by the motor in the CD/DVD drive operating; it is not a

malfunction.

4 Turn on the computer.

It takes approximately 5 minutes until the Windows setup screen appears. Do not

touch the keys and touch pad until it appears.

5 Setup Windows.

6 Change the internal CD/DVD drive letter if necessary.

Getting StartedUseful InformationTroubleshootingAppendix

 To conserve power, the following power saving methods are set at the time of purchase (When AC adaptor

is connected).

• The screen automatically turns off after 15 minutes of inactivity.

• The computer automatically enters sleep

after 20 minutes of inactivity.

Refer to Reference Manual “Sleep or Hibernation Functions” about resuming from sleep.

 Power consumption in each mode is as follows. (When AC adaptor is connected)

• When the screen is off Approx. 12 W

• In sleep Approx. 1.9 W

• The battery pack is fully charged (or not being charged) and the computer is off Approx. 0.9 W

 Note that the computer consumes electricity even when the computer power is off. If the battery pack is fully

charged, the battery will be fully discharged in the following period of time:

• When power is off: Approx. 2 months

• In sleep: Approx. 2 days

• In hibernation: Approx. 3 days

If “Wake Up from wired LAN” is disabled, the period of time will become slightly longer.

If “Wake Up from wireless LAN” is enabled, the period of time will become shorter.

 When the CD/DVD drive power is turned off, the message “The ‘MATSHITA DVD-XXX XXXX’ device can now

be safely removed from the system” will appear, but the CD/DVD drive is an internal device, so it cannot be

removed.

 When Starting Up/Shutting Down

 Do not do the following

• Connecting or disconnecting the AC adaptor

• Sliding the power switch or CD/DVD drive power/open switch

• Touching the keyboard, touch pad or external mouse

• Closing the display

 To change the partition structure

You can shrink a part of an existing partition to create unallocated disk space, from which you can create a new parti-

tion. This computer has a single partition in the default setting.

A Click (Start) and right-click [Computer], then click [Manage].

 A standard user needs to enter an administrator password.

B Click [Disk Management].

C Right-click the partition for Windows (“c” drive in the default setting), and click [Shrink Volume].

 The partition size depends on the computer specifications.

D Input the size in [Enter the amount of space to shrink in MB] and click [Shrink].

 You cannot input a larger number than the displayed size.

E Right-click [Unallocated] (the shrunk space in the step D) and click [New Simple Volume].

F Follow the on-screen instructions to make the settings, and click [Finish].

Wait until formatting is completed.

NOTE

 You can create an additional partition using remaining unallocated space or newly creating unallocated space.

 To delete a partition, right-click the partition and click [Delete Volume] in the step C.

First-time Operation

Getting StartedUseful InformationTroubleshootingAppendix

You can select the Classic view of Control Panel or the Classic Start menu. You can also change the way a user logs on

or off. This manual explains using the Windows Vista default setting (not Classic view or Classic Start menu etc.).

 User Account Control

User Account Control is a new security component of Windows Vista to stop unauthorized changes to your computer.

The User Account Control message will pop up every time you try making an important change to your computer.

 About Windows

Anytime Upgrade

• To upgrade the operating system to Windows Vista

Ultimate, you must purchase the license key at the Microsoft

Windows

Anytime Upgrade web site and receive the Windows

Anytime Upgrade disc from Microsoft Corpora-

tion.

A In an Internet-connected environment, click (Start) - [All Programs] - [Extras and Upgrades] - [Windows

Anytime Upgrade].

B Click [Upgrade to Windows Vista Ultimate].

C After carefully reading the on-screen instructions, click [Begin upgrade process].

D Purchase the license key at the Microsoft Windows

Anytime Upgrade web site and receive the Windows

Anytime Upgrade disc from Microsoft Corporation.

• When you have upgraded the preinstalled “Windows Vista

Business” to “Windows Vista

Ultimate”, setup the

chip set device in the following procedure.

A Click (Start) and input [c:\util\drivers\intelinf\setup.exe] in [Start Search], and press

Enter

 A standard user needs to enter an administrator password.

 Follow the on-screen instructions and setup the chip set device.

 If the computer becomes warm during usage

• Check the usage environment

- Avoid using the computer on a highly heat retentive surfaces (e.g., rubber pads). If possible, use the computer

on surfaces that can dissipate heat, such as a steel desk.

- Do not use a keyboard cover, as this prevents heat dissipation.

- Always keep the display open in sleep.

• Check the following

- If the computer becomes warm while the screen saver is displayed, set the screen saver to [Windows Logo].

Screen savers that use 3-D images or other complex images increase the CPU utilization rate.

- If you are not using a wireless LAN, turn the wireless LAN off.

- Use recommended RAM module products. Non-recommended RAM modules may not operate properly, and

may cause damage to your computer.

• Double-click on the desktop and click [Power Saving Level : High]

Follow the on-screen instructions.

 Reference Manual “Computing on the Road”

• Double-click on the desktop and click [High speed], then click [OK].

- When you set [High speed], rotation of the cooling fan speeds up and the computer can be cooled down. Note

that the battery operating time will be shorter.

- When you do not frequently use CPU or the rotation noise of the fan bothers you, set [Standard] or [Low speed]

as necessary.

 Windows Sidebar

The Windows Sidebar does not appear in the default setting. To display it, click (Start) - [All Programs] - [Acces-

sories] - [Windows Sidebar].

To always display the sidebar:

A Right-click the sidebar icon on the notification area, and click [Properties].

B Add a check mark for [Start Sidebar when Windows starts] and click [OK].

 Sound and Video

• When playing AVI files

When the computer is stressed with lots of application software running or when you are using the computer in hot

location, the sound and images in AVI files may be cut during playback.

The following operations may improve the situation.

- Click or on the notification area, and click [High performance].

(When using the computer in hot location, lower the temperature in the environment to set [High performance].

Setting [High performance] in hot location does not improve the situation.)

Regarding Windows Vista

Getting StartedUseful InformationTroubleshootingAppendix

• When you play back AVI files with the Windows Media Player full screen, the audio and images may not match

with each other. In this case, do either of the following for playback.

- Play back with the Windows Media Player on the window display.

- Use WinDVD for playback.

• When you play back motion image files such as DVD-Video, the following troubles may occur.

- When using Windows Media Player, images are not played back smoothly.

- When using WinDVD, the playback screen becomes suspended.

If this occurs, click (Pause) of WinDVD and click (Play). The sequel is played back.

• Sound (e.g. MP3, WMA) and video (e.g. MPG, WMV) recorded in PC Cards and SD Memory Cards may be inter-

rupted during playback. If this happens, copy them to the hard disk drive and play back.

• Depending on the processing status on Windows, sound may be interrupted at Windows startup. You can mute the

sound at startup.

A Right-click the desktop and click [Personalize] - [Sounds].

B Remove the check mark from [Play Windows Startup sound], and click [OK].

 When Using Wireless LAN <Only for model with wireless LAN>

• If you cannot communicate with the access point or if the access point is not detected, right-click on the notifi-

cation area and click [Connect to a network], and then click in the [Connect to a network] screen.

• If you use the stealth type wireless LAN access point which restricts automatic detection of the wireless LAN

access point, take the following procedure.

If you do not perform the procedure below, you may not be able to access the wireless LAN access point automat-

ically or the wireless LAN access point may not be displayed on the [Connect to a network] screen.

A Click , or on the notification area, click [Network and Sharing Center] - [Set up a connection or network]

- [Manually connect to a wireless network] and click [Next].

B Input necessary information and add check marks for [Start this connection automatically] and [Connect even if

the network is not broadcasting] and click [Next].

 When the computer suddenly enters hibernation

When you successively operate application software with CPU load in hot location, the internal temperature control

function may work and the computer may enter hibernation.

If this occurs, wait for a while (approx. 5 minutes) before you turn on the computer.

 Windows Update

You can update to the latest patches and service packs for Windows with the following menus.

(Start) - [All Programs] - [Windows Update]

Do not apply “Driver Updates” even if a message to update a driver appears. If a driver update is required,

contact your technical support office.

Getting StartedUseful InformationTroubleshootingAppendix

On-screen Manual

You can access the following manuals on the computer screen after completing the “First-time Operation”.

When you access the on-screen manual for the first time, the License Agreement of the Adobe Reader may be dis-

played. Read it carefully and select [Accept] to proceed.

 Reference Manual

The Reference Manual contains the practical information to help you fully enjoy the computer’s performance.

To access the Reference Manual:

Double-click on the desktop.

 Important Tips

The Important Tips will provide you with the helpful information about the battery. Read to use the battery pack in the

optimum condition to obtain longer operation time.

To access the Important Tips:

Double-click on the desktop.

 Alternatively click (Start) - [All Programs] - [Panasonic] - [On-Line Manuals] - [Important Tips].

 Hard Disk Handling

The Hard Disk Handling will provide you with the helpful information on how to use the hard disk.

To access the Hard Disk Handling:

Click (Start) - [All Programs] - [Panasonic] - [On-Line Manuals] - [Hard Disk Handling].

 Supplementary Instructions of Bluetooth <Only for model with Bluetooth>

The Supplementary Instructions will provide you with the helpful information about the Bluetooth.

To access the Supplementary Instructions of Bluetooth:

Click (Start) - [All Programs] - [Panasonic] - [On-Line Manuals] - [Bluetooth Manual].

NOTE

 When Adobe Reader update notice is displayed, we recommend you follow the on-screen procedure to update.

See http://www.adobe.com/ for the latest version of Adobe Reader.

Contents

 Read Me First

 Using the Touch Pad

 Key Combinations

 Battery Power

 Customizing the Power Setting

 Computing on the Road

 Sleep or Hibernation Functions

 Security Measures

 CD/DVD Drive

 WinDVD

 Writing to CD/DVD

 PC Cards

 SD/SDHC Memory Card

 Mini Port Replicator

 External Display

 USB Devices

 Modem

 LAN

 Disabling/Enabling Wireless Com-

munication

 Wireless LAN

 Setup Utility

 Loupe Utility

 DMI Viewer

 Troubleshooting (Advanced)

 Check the Computer’s Usage Sta-

tus

 PC Information Popup

 Protecting Your Computer from

Viruses

 Technical Information

Getting StartedUseful InformationTroubleshootingAppendix

Handling and Maintenance

 Place the computer on a flat stable surface. Do not place the computer upright. If the computer is exposed to an

extremely strong impact, it may become inoperable.

 Temperature: Operation: 5 °C to 35 °C {41 °F to 95 °F}

Storage: -20°C to 60 °C {- 4 °F to 140 °F}

Humidity: Operation: 30% to 80% RH (No condensation)

Storage: 30% to 90% RH (No condensation)

Even within the above temperature/humidity ranges, using for a long time in an extreme environment will result in

the product deterioration and will shorten the product life.

 Do not place the computer in the following areas, otherwise the computer may be damaged.

• Near electronic equipment. Image distortion or noise may occur.

• Near magnets or in magnetic fields.

• In extremely high or low temperature.

 As the computer can become hot during operation, keep it away from items that are sensitive to heat.

This computer is designed to minimize shock to parts such as the hard disk drive, but no warranty is provided against

any trouble caused by shock. Be extremely careful when handling the computer.

 When carrying the computer:

• Turn off the computer.

• Remove all external devices, cables, cards and other protrud-

ing things.

• Remove a disc in the CD/DVD drive.

• Do not drop or hit the computer against solid objects.

• Do not leave the display open.

• Do not pick up or hold the computer by the PC card slot or dis-

play parts.

 When you board an airplane, take the computer with you and never put it in your checked lug-

gage. When using the computer on airplane, follow the airline’s instructions.

 When carrying a spare battery, put it in a plastic bag to protect its terminals.

 This computer contains a magnet and magnetic products at the locations circled in the illustra-

tion at right. Avoid leaving metallic object or magnetic media in contact with these areas.

 The touch pad is designed to be used with a finger tip. Do not place any object on its surface

and do not press down strongly with sharp-pointed or hard objects that may leave marks (e.g.,

nails, pencils and ball point pens).

 Avoid any harmful substances such as oil from getting into the touch pad. The cursor may not work correctly.

 If the computer is being carried in a soft bag with the battery pack removed, avoid undue pressure on the body of the

computer in a crowded place, etc., as this may result in damage to the LCD.

 When using peripheral devices

Follow these instructions and the Reference Manual to avoid any damage to the devices. Carefully read the instruction

manuals of the peripheral devices.

 Use the peripheral devices conforming to the computer’s specifications.

 Connect to the connectors in the correct direction.

 If it is hard to insert, do not try forcibly but check the connector’s shape, direction, alignment of pins, etc.

 If screws are included, fasten them securely.

 Preventing your computer from unauthorized use via wireless LAN/

wireless WAN/Bluetooth

<Only for model with wireless LAN/

wireless WAN/Bluetooth

 Before using wireless LAN/

wireless WAN/Bluetooth

, make the appropriate security settings such as data encryption.

 Computrace

Software

Computrace

software tracks your stolen computer.

Perform the following steps before installing Computrace

software.

 Computrace

software is not included or installed in this computer.

Operation Environment

Handling Cautions

Handling and Maintenance

Getting StartedUseful InformationTroubleshootingAppendix

CAUTION

 You will be unable to set [Computrace (R) BIOS Module] to [Disable] once you have set to [Enable]. Do not change

the setting when not used.

• Even if you have set [Computrace (R) BIOS Module] to [Enable], this setting may return to [Disable] after repairs to

the motherboard, etc. have been made.

NOTE

 Consult Absolute Software Corp. before disposal.

 Refer to the following URL for Computrace

software for installation and available service regions. Note that this

service is only available in certain regions.

http://www.absolute.com

1 Turn on or restart the computer, and press

while [Panasonic] boot screen is dis-

played.

The Setup Utility starts up.

 If the password is requested, enter the Supervisor Password.

2 Select the [Security] menu, then select [Computrace (R) Sub-Menu] and press

Enter

3 Select [Computrace (R) BIOS Module], and set to [Enable].

4 At the confirmation message, select [Execute] and press

Enter

5 At the reconfirmation message, select [Execute] and press

Enter

6 Press

F10

At the confirmation message, select [Yes] and press

Enter

The computer restarts.

To clean the LCD panel and touch pad

Wipe lightly with a gauze or other dry, soft cloth.

To clean areas other than the LCD panel and touch pad

Wet a soft cloth with water or a diluted kitchen cleanser (neutral), wring the cloth out thoroughly, and wipe the dirty area

gently. Using a detergent other than a neutral kitchen cleanser (e.g., a weak alkali cleanser) may adversely affect

painted surfaces.

CAUTION

 Do not use benzene, thinner, or rubbing alcohol since it may adversely affect the surface causing discoloration, etc.

Do not use commercially-available household cleaners and cosmetics, as they may contain components harmful to

the surface.

 Do not apply water or detergent directly to the computer, since liquid may enter inside of the computer and cause

malfunction or damage.

When setting the screen resolution to a resolution below the LCD's resolution, e.g. 1024 × 768 pixels, the images

appearing on the screen will be stretched. As a result, the characters displayed may appear blurred. This is normal, and

not indicative of a malfunction.

To display large characters with no blurring

Try the following steps while keeping the LCD in its resolution (1400 × 1050).

1 Right-click the desktop and click [Personalize] - [Adjust font size (DPI)].

 A standard user needs to enter an administrator password.

2 Click [Larger scale (120 DPI)] and click [OK].

 To display enlarged font sizes in applications such as Internet Explorer:

Use the display enlargement function provided by the specific software application.

 To magnify a part of the screen, use the Loupe Utility.

Maintenance

When Using the Computer with a Reduced Screen Resolution

La page charge ...

Panasonic CF-Y7 series Manuel utilisateur

Marque: Panasonic

Modèle: CF-Y7 series

Catégorie: Des cahiers

Taper: Manuel utilisateur

Ce manuel convient également à

Télécharger le PDF

rapport

dans d''autres langues

English: Panasonic CF-Y7 series User manual

Panasonic CF-Y7 series Manuel utilisateur

Ce manuel convient également à

Panasonic CF-Y7 series Manuel utilisateur

dans d''autres langues

Documents connexes

Autres documents