Westinghouse Flat Panel Television LTV-19w6 Manuel utilisateur

Marque: Westinghouse

Modèle: Flat Panel Television LTV-19w6

Catégorie: Téléviseurs LCD

Taper: Manuel utilisateur

Ce manuel convient également à

LTV-19w6

USER’S MANUAL

MANUEL DE L’UTILISATEUR

MANUAL DEL USUARIO

LTV-19w6

Widescreen LCD TV

TV LCD à Écran Géant

TV LCD Pantalla Grande

Table of Contents

IMPORTANT PRODUCT SAFETY INSTRUCTIONS ......................................................................................2

Antenna Installation Safety...................................................................................................................................4

Cleaning the LCD TV ...........................................................................................................................................4

Safety Guidelines ..................................................................................................................................................5

FCC Compliance Statement..................................................................................................................................5

INSTALLATION .....................................................................................................................................................6

1. Insert Remote Control Batteries ...................................................................................................................6

2. Attach Base Stand to LCD TV .....................................................................................................................7

3. Connect Antenna, Cable, Video, S-Video, YPbPr, DVI, and/or VGA Cables.............................................8

4. Connect Power Cable.................................................................................................................................10

5. Turn Power On...........................................................................................................................................10

6. Programming TV Channels........................................................................................................................11

CONTROLS & CONNECTIONS........................................................................................................................12

Front View of the Product...................................................................................................................................12

Remote Control ...................................................................................................................................................14

OSD FUNCTIONS ................................................................................................................................................15

TV OSD Menu ....................................................................................................................................................15

Image Menu ....................................................................................................................................................15

Audio Menu ....................................................................................................................................................16

Color Menu.....................................................................................................................................................16

TV Menu.........................................................................................................................................................17

Miscellaneous Menu .......................................................................................................................................17

V-Chip and Parental Control Menu ................................................................................................................18

Rating Menus..................................................................................................................................................19

Video OSD Menu................................................................................................................................................19

PC OSD Menu ....................................................................................................................................................20

Image Menu ....................................................................................................................................................20

Audio Menu ....................................................................................................................................................21

Color Temp Menu...........................................................................................................................................21

Miscellaneous Menu .......................................................................................................................................22

INFO Menu.....................................................................................................................................................22

PC DVI OSD Menu ............................................................................................................................................22

PIP function Menu ..............................................................................................................................................23

Auto Adjustment .................................................................................................................................................23

Input Source not found or Out of Range.............................................................................................................24

APPENDIX ............................................................................................................................................................25

Specifications ......................................................................................................................................................25

Troubleshooting ..................................................................................................................................................26

No power ........................................................................................................................................................26

Power is ON but no screen image...................................................................................................................26

Wrong or abnormal colors ..............................................................................................................................26

Snow appears on screen..................................................................................................................................26

No sound.........................................................................................................................................................26

Remote control does not work........................................................................................................................26

Remote control code not found in “universal” remote ...................................................................................26

How do I find more help? ...............................................................................................................................26

IMPORTANT PRODUCT SAFETY

INSTRUCTIONS

Read carefully and follow all warnings and instructions in this User's Manual and those

marked on the product before you operate your television. Failure to follow warnings can

result in personal injury or damage to product. Keep this User’s Manual in a convenient

location for future reference.

Proper Positioning of Television

Always handle your LCD television with care. Avoid touching the LCD screen. Skin oils are

difficult to remove.

Always position your LCD television on a stable and level surface. Unstable surfaces can

cause your LCD to topple and fall, resulting in possible damage or injury.

Avoid exposing the LCD display to direct sunlight or high temperatures, which can damage or

shorten its useful life. Do not place near heat sources such as radiators, heat registers, or

other appliances that generate heat.

Avoid exposing the LCD display to rain, water, moisture or high humidity. Do not place your

LCD near basins or sinks where it may come in contact with water.

Orient your LCD display away from direct sunlight to reduce glare.

Never place heavy or sharp objects on the LCD display, video cable, or power cord.

Overloading Outlets

Do not overload electrical power sources when installing television. Overloading wall outlets,

circuits, or extension cords can result in overheating, fire, or electric shock. Use only

grounded or polarized outlets.

Power Cord Protection

Minimize wear on power supply cords. Power supply cords should be routed away from foot

traffic and contact with other objects. Do not route power cord under rugs or carpeting.

The cord should never be severely bent, pinched, or twisted. Periodically inspect power

cords for wear or damage, particularly near plug and the point where it exits from the product.

Unplug cord and discontinue use if damage is discovered.

Ventilation

Slots and openings on the cabinet are provided for ventilation purposes. To ensure reliable

operation of the product and to protect it from overheating, these openings must not be

blocked or covered. Keep the LCD TV a minimum of four (4) inches away from any wall to

assure sufficient airflow and ventilation. Increased temperatures may cause fire or device

failure.

To assure proper ventilation, do not block the openings by placing the LCD TV on a bed, sofa,

rug or other similar surface. Do not place it in a built-in installation, such as a bookcase or an

enclosed rack, unless proper ventilation is provided.

Other Notices and Precautions

Caution

: Never remove the rear cover. There are no user serviceable parts inside. Your

LCD TV contains high-voltage parts. You may be seriously injured if you touch them.

Do not attempt repairs yourself. Your warranty does not cover repairs or attempted repairs by

anyone not authorized by Westinghouse Digital. Refer all servicing and repairs to qualified

service personnel.

If smoke, abnormal noise, or strange odor is present, immediately unplug the power cord.

Contact a qualified service technician

If your LCD TV will not be used for extended periods of time, unplug the power cord and

remove the batteries from the remote control.

Antenna Installation Safety

Outdoor Antenna Grounding

If an outside antenna or cable system is connected to the LCD TV, be sure the antenna or cable

system is grounded so as to prevent voltage surges and built-up static charges. Article 810 of the

National Electrical Code, ANS/NFPA 70, provides information with regard to proper grounding of the

mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, connection

to grounding electrodes, and requirements for the grounding electrode.

Lightning

For added protection for the LCD TV during a lightning storm, or when it is left unattended and unused

for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable system. This

will prevent damage to the product due to lightning and power-line surges. Do not disconnect the

antenna or the power cord during a heavy storm – lightning may strike while you are holding the cable

cord, causing serious injury. Turn off your LCD display and wait for the weather to improve.

Power Lines

An outside antenna system should not be located in the vicinity of overhead power lines or other

electric light or power circuits. When installing an outside antenna system, extreme care should be

taken to keep from touching such power lines or circuits as contact with them may be fatal.

Cleaning the LCD TV

x MAKE SURE THE LCD TV IS TURNED OFF

x NEVER SPRAY OR POUR LIQUID DIRECTLY ONTO THE SCREEN OR CASE

To clean the screen:

1. Wipe the screen with a clean, soft, lint-free cloth. This removes dust and other particles.

2. If it still is not clean, apply a small amount of non-ammonia, non-alcohol based glass cleaner

onto a clean, soft, lint-free cloth, and wipe the screen.

To clean the case:

1. Use a soft, dry cloth.

2. If it still is not clean, apply a small amount of non-ammonia, non-alcohol based, mild

non-abrasive detergent onto a clean, soft, lint-free cloth, then wipe the surface.

Disclaimer

Westinghouse Digital does not recommend the use of any ammonia or alcohol-based cleaners on the

LCD TV screen or case. Some chemical cleaners have been reported to damage the screen and/or

LCD display case. Westinghouse Digital will not be liable for damage resulting from use of any

ammonia or alcohol-based cleaners.

Safety Guidelines

Warning: This device must be operated with the original power supply.

CAUTION: The socket-outlet should be installed near the equipment and should be easily accessible.

CAUTION: Use a power cable that is properly grounded. Always use the appropriate AC cord that is certified for

the individual country. Some examples are listed below:

USA...............…UL Switzerland……SEV

Canada.............CSA Britain ...........…BASE/BS

Germany……….VDE Japan ...............Electric Appliance Control Act

IMPORTANT NOTICE CONCERNING POWER CORD SELECTION

The power cord set for this unit has been enclosed and has been selected according to the country of destination

and must be used to prevent electric shock. Use the following guidelines if it is necessary to replace the original

cord set, or if the cord set is not enclosed.

The female receptacle of the cord set must meet IEC-60320 requirements and may look like (Figure A1 below):

Figure A1 Figure A2

For the United States and Canada

In the United States and Canada the male plug is a NEMA5-15 style (Figure A2), UL Listed, and CSA Labeled.

For units that are mounted on a desk or table, type SVT or SJT cord sets may be used. For units that sit on the

floor, only SJT type cord sets may be used. The cord set must be selected according to the current rating for your

unit. Please consult the table below for the selection criteria for power cords used in the United States and

Canada.

Cord Type Size of Conductors in Cord Maximum Current Rating of Unit

SJT 18 AWG

16 AWG

14 AWG

10 Amps

12 Amps

SVT 18 AWG

17 AWG

10 Amps

12 Amps

FCC Compliance Statement

This equipment has been tested and found to comply with the limits for a Class B digital

device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable

protection against harmful interference in a residential installation. This equipment generates,

uses, and can radiate radio frequency energy, and may cause harmful interference to radio

communications if not installed and used in accordance with the instructions. However, there

is no guarantee that interference will not occur in a particular installation. If this equipment

does cause harmful interference to radio or television reception, which can be determined by

turning the equipment off and on, the user is encouraged to try to correct the interference by

one or more of the following measures:

x Reorient or relocate the receiving antenna.

x Increase the separation between the equipment and receiver.

x Connect the equipment into an outlet on a circuit different from that to which the

receiver is connected.

x Consult the dealer or an experienced radio/TV technician for help.

FCC Warning

To assure continued FCC compliance, the user must use a grounded power supply cord and the provided

shielded video interface cable with bonded ferrite cores. If a BNC cable is going to be used, use only a shielded

BNC (5) cable. Also, any unauthorized changes or modifications not expressly approved by Westinghouse Digital

will void the user's authority to operate this device.

Installation

Congratulations on your purchase of a Westinghouse 19” wide screen LCD TV. Sleek and

practical, this lightweight LCD TV delivers a crisp, vibrant picture and doubles as a superb

WSXGA+ computer monitor —making it a practical solution for tight spaces in the office,

bedroom, or kitchen. Watch television, play video games, e-mail, or surf the Internet.

Package Contents

Your LCD TV package includes:

x 19” widescreen LCD TV

x Detachable Base Stand

x Remote Control (2 AAA batteries are included)

x AC Power Cord

x D-Sub (VGA) Cable

x 3.5mm Mini-Jack Audio Cable

x Literature

o Quick Connect Guide

o User’s Manual

o Warranty Card

Important

Save the original box and all packing material for future shipping needs.

1. Insert Remote Control Batteries

x Remove the battery cover.

x Insert two “AAA” batteries.

x Re-attach the battery cover.

CAUTION

x Only use AAA batteries as specified.

x Do not mix new and old batteries. This may result in

cracking or leakage, which may pose a fire risk or lead

to personal injury.

x Insert batteries according to (+) and (í) markings.

Inserting the batteries incorrectly may result in

cracking or leakage, which may pose a fire risk or lead

to personal injury.

x Dispose of the battery in accordance with local laws

and regulations.

x Keep the battery away from children and pets.

x When the remote control will not be used for an

extended period, remove the batteries.

2. Attach Base Stand to LCD TV

Attach the base stand to the LCD TV stand neck. Align the holes and tabs, press and snap

the base stand into place.

To detach the base stand, just press on the locking tabs on the bottom of the base stand and

remove the base stand from the stand neck.

Detachable Base Stand

3. Connect Antenna, Video, S-Video, YPbPr, DVI, and VGA

Cables

Connect video and audio cables from compatible devices to the back panel of the LCD TV.

Video Inputs

PC Inputs

DVI

S- Video

Video Inputs

PC Inputs

Video

D-Sub (VGA)

YPbPr

Audio-R

Audio-L

Antenna

Audio-In

Audio-Out

Note: The Audio-L and Audio-R (Audio L/R) inputs are shared between YPbPr, S-Video, and

Video source input connectors.

Connecting a computer to the LCD TV:

IMPORTANT: Before you begin, make sure the computer and TV are turned off.

Connect a D-Sub (VGA) or DVI cable and an audio cable to the back of the LCD TV.

D-Sub CONNECTION: Connect an analog D-Sub (VGA) cable from your computer VGA port

to the D-Sub input connection. Connect a 3.5mm stereo mini-cable from the computer’s

AUDIO OUT port to the AUDIO IN port on the LCD TV.

DVI-D CONNECTION: Connect a Digital DVI cable from your computer to the DVI-D input

connection. Connect a 3.5mm stereo mini-cable from the computer’s AUDIO OUT port to the

AUDIO IN port on the LCD TV.

After you turn on the computer, the TV will automatically adjust to the resolution of the

computer. Set the computer timing mode to 1440 x 900 at 60Hz, then turn off and reboot the

computer. Refer to your computer’s graphic card user guide for questions on how to set this

timing mode.

4. Connect Power Cable

Connect the power cord to the back of the LCD TV and then into a properly grounded AC

outlet.

5. Turn Power On

Press the power button on the right side of the LCD TV or on the remote control to turn on the

TV.

Power Button

Remote Power Button

6. Programming TV Channels

1. Select TV as the source input using the Source button on the remote control.

2. Press the Menu button to display the OSD Display Menu.

3. Use the CHŸ/źarrow keys to highlight the TV Menu.

4. Using the Vol Ź arrow keys select the TV sub-menu. Use the ź to highlight the CH

Auto Scan function. Press Vol Ź arrow key and Channel Auto Scan will be performed.

5. Once the CH Auto Scan is complete, switch channels by using the CH Ÿ/ź arrow keys

on the remote.

6. To Add/Erase channels use the ź to highlight the CH Edit function. Use the Ź, or

to add or erase the selected channel.

Controls & Connections

This section describes the keypad panel controls, and remote control in more detail.

Front View of the Product

Use the buttons on the right side keypad control to display and adjust the On Screen Display

(OSD). The OSD controls are explained at the next page and are defined in the “OSD

Functions” section.

Keypad Controls

Speakers

IR Receiver

Side Keypad Controls

Button Mode TV Source OSD Menu

CH+

Channel up Navigate up

CH-

Channel down Navigate down

Vol-

Volume down Decrease value

Vol+

Volume up Increase value

5 Menu/Source

Press and hold for 2 seconds to

access the OSD menu. Press

and release to change source.

Enter/Exit Menu

6 Power TV ON or OFF TV ON or OFF

Remote Control

1. Mute

Turn audio on and off.

2. MTS (Multi-channel TV Sound)

Stereo, Mono and SAP sound selection

3. Power

Switch the power on and off.

4. Sleep

Automatically turn off the TV after a set

time.

5. Display

Display the channel information.

6. PIP

Available in D-Sub/DVI Modes; to turn PIP

picture on & off and select PIP picture size.

7. PIP Menu

Used to navigate through the PIP OSD

menu and control audio swap.

8. Return

Recall the previous channel.

9. CHANNEL NUMBER KEY 0-9, 100

Direct channel selection by number

10. V-Chip

Set Parental and Movie Rating to Block or

Un-Block. Navigate through OSD menus.

Pin Code is also set here.

11.

CHŸ/ź

Channel Up/Down adjustment; also

available on key controls and OSD menu.

12. Source

Push to select input source.

13.

Press to enter the OSD Menu.

14.

VolŻ/Ź

Volume Up/Down adjustment; also

available on key controls and OSD menu

control. If the OSD menu is displayed, scroll

down in OSD Menus.

15. CC

Set Closed Caption and Text modes toggle

through OFF, CC1, CC2, CC3 etc.

16. Scaling

Push to change picture aspect ratio to

Normal, Zoom, or Full.

17. Exit

Exit the OSD menu.

OSD Functions

This section describes each on-screen display (OSD) command. There are different OSD

menus depending on whether you are in TV, Video (Video/S-Video/YPbPr) or PC (D-Sub/DVI)

mode.

All the function settings for your LCD TV are controlled either via the remote control or using

the control keys located on the right side of the LCD TV. To display the OSD main menu,

press and hold the Menu button on the control keys or the MENU key on the remote control.

Use the Ÿ/ź arrow keys to navigate within the menu. The Ż/Ź arrow keys are used to

change the values of the functions that are selected in the OSD menu. The EXIT key on the

remote control or Menu button on the control keys allows you to exit out of the OSD menus

and functions.

TV OSD Menu

Image Menu

In the Image Menu use the VolŹ button to select image the

sub-menu. Use the CHŸ/ź buttons to highlight the function.

Then use the VolŻ/Ź arrow keys to change the values of the

function in the OSD menu.

Function Name Explanation

Brightness

Brightness adjustment

Contrast

Contrast adjustment

Sharpness

Video Sharpness adjustment

Color

Color Levels adjustment

Hue

Video Hue adjustment

DLC

Turn Dynamic Luminance Control On or Off

Back Light

Backlight from 0-100 adjustment

Enter OSD Menus by

pressing MENU key

Audio Menu

In the Audio Menu use the VolŹ button to select the Audio sub-menu. Use the CHŸ/ź

buttons to highlight the function. Then use the VolŻ/Ź arrow keys to change the values of

the function in the OSD menu.

Function Name Explanation

Volume

Volume adjustment

Mute

Turn Audio Off and On

Treble

Treble adjustment

Bass

Bass adjustment

Balance

Left to Right Audio adjustment

MTS

Multi-channel Television Sound, select SAP, MONO, or STEREO

Color Menu

In the Color Menu use the VolŹ button to select the Color sub-menu. Use the CHŸ/ź

buttons to highlight the function. Then use the VolŻ/Ź arrow keys to change the values of

the function in the OSD menu.

Function Name Explanation

Color Temp.

Color temperature adjustment

Red

Red level adjustment

Green Green level adjustment

Blue

Blue level adjustment

TV Menu

In the TV Menu, use the VolŹ button to select the TV sub-menu. Use the CHŸ/ź buttons to

highlight the function. Then use the VolŻ/Ź arrow keys to change the values of the function

in the OSD menu.

Function Name Explanation

Tuner System

Select between STD, HRC, IRC, Air (Depending on your local area)

CH. Auto Scan

Start to scan channel after pressing right or left key, and stop scan if any key is

pressed.

CH. Fine Tune

Tune channel from 0-100

Blue Screen

Toggle between video blanking to blue between channel changes – default is No

CH. No

Current channel

CH. Edit

Select the channel to Edit using Ż/Ź arrow keys

C.C.

Closed Caption Display

Miscellaneous Menu

In the Miscellaneous Menu, use the VolŹ button to select the “Misc” sub-menu. Use the

CHŸ/ź buttons to highlight the function. Then use the VolŻ/Ź arrow keys to change the

values of the function in the OSD menu.

Function Name Explanation

Language

English, Chinese, French, Spanish

OSD Transparency

Set OSD transparency level

OSD Time-out

Set the time to turn off the OSD automatically

OSD Position

OSD horizontal/vertical position adjustment

Reset

Restore factory default settings

Sleep

Set the Sleep timer for 30, 45, 60, 90, or 120 minutes

Aspect Ratio Set the display to Full, Normal, or Zoom (Can only change with an active signal)

V-Chip and Parental Control Menu

To access the PARENTAL CONTROL menu press the V-Chip button located on the remote

control. Enter the Pin Code (default is 0000).

To change the Pin Code, enter new Password and confirm new Password is set.

Rating Menus

Press the V-Chip button on the remote control to access the Parental Control Menu. Enter the

PIN code. Use the ź button to highlight the Movie (MPAA) or TV (TVPG) menu. Use the Ź

button to select the sub-menu. Use the Ÿ/ź buttons to highlight the Movie/TV Rating to be

blocked or un-blocked. Press the MENU button to lock and unlock the highlighted rating.

Press EXIT to exit the V-chip menu.

Function Name Explanation

MOVIE RATING G:

PG:

PG 13:

NC 17:

General audience

Parental Guidance suggested

Parents strongly cautioned

Restricted

No one 17 and under admitted

Adult audience only

TV RATING

Y7:

PG:

14:

MA:

<<< AGE >>>

All Children

Directed to Older Children

General Audience

Parental Guidance Suggested

Parents Strongly Cautioned

Mature Audience Only

Video OSD Menu

The Video (Video/S-Video/YPbPr) OSD Menu has the same OSD features as the TV OSD

except for the TV sub-menu functions.

La page charge ...

Westinghouse Flat Panel Television LTV-19w6 Manuel utilisateur

Marque: Westinghouse

Modèle: Flat Panel Television LTV-19w6

Catégorie: Téléviseurs LCD

Taper: Manuel utilisateur

Ce manuel convient également à

LTV-19w6

Télécharger le PDF

rapport

dans d''autres langues

English: Westinghouse Flat Panel Television LTV-19w6 User manual

Westinghouse Flat Panel Television LTV-19w6 Manuel utilisateur

Ce manuel convient également à

Westinghouse Flat Panel Television LTV-19w6 Manuel utilisateur

dans d''autres langues

Documents connexes

Autres documents