Intermec MaxiScan 2100 Guide de démarrage rapide

Taper
Guide de démarrage rapide

Ce manuel convient également à

Intermec’s MobileLAN™access family of access points delivers reliable and seamless wireless
performance to almost any operational environment. The MobileLAN access 2100 is
designed for standards-based connectivity and it may have up to two of the following radios
installed:
IEEE 802.11b
WLI Forum OpenAir
902 MHz
S-UHF
The 2100 with an IEEE 802.11b radio installed is Wi-Fi certified for
interoperability with other 802.11b wireless LAN devices.
This quick start guide helps you to understand the 2100 ports and LEDs. You can also use this
quick start guide to learn how to install the 2100, how to connect the 2100 to power and to
your network, and how to use the MobileLAN access Utility to configure its IP address. Once
you assign the 2100 an IP address, you can continue configuring it using a Web browser
interface or a Telnet session.
Out of the Box
MobileLAN
access 2100
Heading 1
About the 2100
Safety First
Quick Start Guide
More Information
Specifications
Note: The 2100 does not ship with an antenna. For a list of antennas and antenna
accessories, see the MobileLAN access System Manual (Part No. 067150) or contact
your local Intermec representative.
MobileLAN access 2100 Quick Start Guide
*067151-006*
*067151-006*
For more information on using the MobileLAN access 2100, please see the
MobileLAN access System Manual (Part No. 067150).
Intermec Web site at www.intermec.com.
To order access point accessories and antennas, contact your local Intermec representative.
Physical dimensions 9.5 cm x 23.6 cm x 35.5 cm
(3.75 in x 9.3 in x 14.0 in)
Weight 2.63 kg (5.8 lb)
Electrical rating ~100 to 240 V
1.0 to 0.5A
50 to 60 Hz
Power over Ethernet N 48V
(optional) electrical rating 315 mA
Environmental rating IP 54
Operating temperature
Standard -25°C to 70°C (-13°F to 158°F)
Heater (optional) -30°C to 70°C (-22°F to 158°F)
Heater and insulated -30°C to 0°C (-13°F to 32°F)
bag (optional)
Storage temperature -40°C to 70°C (-40°F to 158°F)
Humidity 10 to 90%, non-condensing
Patent information
Product is covered by one or more of the following patents: 4,910,794; 5,070,536; 5,295,154;
5,349,678; 5,394,436; 5,425,051; 5,428,636; 5,483,676; 5,504,746; 5,546,397; 5,574,979;
5,592,512; 5,680,633; 5,682,299; 5,696,903; 5,740,366; 5,790,536; 5,844,893; 5,862,171;
5,940,771; 5,960,344. There may be other U.S. and foreign patents pending.
Caution
Government regulatory agencies mandate that the antenna not be
alterable. Therefore, the access point uses a custom antenna connector. Do
not attempt to use a different antenna or you may damage the connector
and the access point.
Conseil
Les agences responsable de la réglementation gouvernementale exigent
que l’antenne ne soit pas modifiable. Par conséquent, le point d’accès est
doté d’un connecteur d’antenne personnalisé. Ne pas essayer d’utiliser une
antenne différente au risque d’endommager le connecteur et le point
d’accès.
CAUTION
!
6001 36th Avenue West
Everett, WA 98203
U.S.A.
www.intermec.com
© 2002 Intermec Technologies Corp.
All Rights Reserved
This product includes software developed by the OpenSSL Project for use in the OpenSSL Toolkit (http://www.openssl.org).
This product includes cryptographic software written by Eric Young (ea[email protected]).
CD
AC power
cord
Document
package
MobileLAN access
2100
Defining the LEDs and Ports
MobileLAN
access 2100 Quick Start Guide
To access the 2100 ports, unscrew the two thumbscrews that are on the front of the cable
access door and then remove the door.
1 2
Mounting the 2100 Connecting the 2100
Attach antennas or antenna cables to the antenna connectors on the 2100. A variety
of external antenna options are available.
Connect the 2100 to your network. You can either use an Ethernet cable to connect
the Ethernet port to an Ethernet drop or you can use the fiber optic port option. For
help connecting the 2100 to your fiber optic network, see “Connecting to Your Fiber
Optic Network” in the MobileLAN access System Manual.
Connect the 2100 to power. You can either use an AC power cord or the power over
Ethernet option. To use the power over Ethernet option, you need to use an Ethernet
cable to connect the Ethernet port to a MobileLAN power bridge. For help, see the
documentation that shipped with your power bridge.
3
5
4
Setting an Initial IP Address
Check for Software Upgrades
You should check the Intermec MobileLAN Web site at http://mobilelan.intermec.com for
free software downloads and the latest documentation. To upgrade your access point
software, follow the instructions in the MobileLAN access System Manual.
You can place the 2100 either horizontally or vertically on a stable surface. You can also
mount the 2100 to a wall or a beam using one of these mounting bracket kits:
Mounting bracket kit (Part No. 068918)
Rotating mounting bracket kit (Part No. 068751)
Depending on your operating temperature, you can use these mounting options:
1
3
2
3
Install the MobileLAN access Utility on your PC by inserting the enclosed CD,
clicking Install Software, and following the instructions that appear on your screen.
You can also download the software from http://mobilelan.intermec.com.
Note: Your PC must be on the same Ethernet segment as the access point.
Or, if your PC is communicating wirelessly with the access point, you must
have an active radio connection.
Start the utility.
Configure parameters A through C. See the screen to the right.
Click Set.
Reboot the access point by disconnecting it from and reconnecting it to a power
source. The Status box lets you know when the new IP address is successfully set.
1
5
4
3
2
Congratulations!
Your wireless end devices can now begin transmitting data packets through the 2100 to your
wired network. To continue configuring the access point, from the Actions menu choose
Configure Access Point. Your Web browser application (for example, Internet Explorer) starts
and the Access Point Login screen appears.
A
Click the down arrow and
choose Set IP Address.
B
Enter the Ethernet MAC
address of the access point
(printed on a label on the
access point).
C
Enter the new IP address of
the access point.
Click Software
Downloads.
AC
power
Ethernet
connection
Antennas
Power
port
Serial
port
Power
Remains on after
the 2100 boots.
Wireless #1
Flashes when a frame is
transmitted or received on
the radio port for the radio
installed in radio slot 1.
Wired LAN
Flashes when a
frame is transmitted
or received on the
Ethernet port.
Root/error
Flashes if this 2100 is
configured as the
root. It remains on if
an error is detected.
Wireless #2
Flashes when a frame is
transmitted or received on
the radio port for the radio
installed in radio slot 2 (if a
second radio is installed).
Fiber
optic port
(optional)
10BaseT/
100BaseTx
Ethernet port
Cable access
door
-25˚C to 70˚C
(-13˚F to 158˚F)
-30˚C to 70˚C
(-22˚F to 158˚F)
Use a mounting
bracket kit to
mount the 2100
with heater option
so that the LEDs
face down.
-30˚C to 0˚C
(-22˚F to 32˚F)
Place the 2100 with heater
option in an insulated bag
(Part No. 068216) before
using a mounting bracket kit.
Wall
Wall
  • Page 1 1
  • Page 2 2

Intermec MaxiScan 2100 Guide de démarrage rapide

Taper
Guide de démarrage rapide
Ce manuel convient également à

dans d''autres langues