Maytag MAV2757AWW Le manuel du propriétaire

Marque: Maytag

Modèle: MAV2757AWW

Catégorie: Machines à laver

Taper: Le manuel du propriétaire

Ce manuel convient également à

MAV-1

Use& CoreGuide

Table of Contents

Important Safety Instructions 1-2 Special Features ........ 12-13

Operating Tips ........... 3-4

Care & Cleaning ........... 13

Using the Controls

3 Speed Select Models ....... 5-6

4 Speed Select Models ....... 7-8

Electronic Control Models ...... 9-1 1

Troubleshooting ........... 14

Service & Warranty ........ 15

Guide d'utilisation

et d'entretien .............. 16

Guia de uso y cuidado ..... 34

Form No. Y81903 A Part No. 2206671 www.maytag.com Litho U.S.A. _2006 Maytag Appliances Sales Co.

ImportnntSnfet¥Instructions

What You Need to Know About

Safety Instructions

Warning and Important Safety Instructions appearing in

this guide are not meant to cover all possible

conditions and situations that may occur. Common

sense, caution and care must be exercised when

installing, maintaining or operating appliance.

Always contact the manufacturer about problems or

conditions you do not understand.

Recognize Safety Symbols, Words,

Labels

ImportnntSnfet¥Instructions

1. Read all instructions before using the appliance,

2, As with any equipment using electricity and having

moving parts, there are potential hazards, To use this 7.

appliance safely, the operator should become familiar

with the instructions for operation of the appliance 8,

and always exercise care when using it.

3, Do not install or store this appliance where it will be

exposed to the weather.

4, Install and level washer on a floor that can support

the weight.

5. This appliance must be properly grounded. Never

plug the appliance cord into a receptacle which is not

grounded adequately and in accordance with local

and national codes. See installation instructions for

grounding this appliance.

6, To avoid the possibility of fire or explosion:

a. De not wash items that have been previously

cleaned in, washed in, soaked in, or spotted with

gasoline, dry-cleaning solvents, other flammable or

explosive substances as they give off vapors that

could ignite or explode. Hand wash and line dry

any items containing these substances,

Any material on which you have used a cleaning

solvent, or which is saturated with flammable

liquids or solids, should not be placed in the

washer until all traces of these liquids or solids

and their fumes have been removed.

These items include acetone, denatured alcohol,

gasoline, kerosene, some liquid household

cleaners, some spot removers, turpentine, waxes

and wax removers.

De not add gasoline, dry-cleaning solvents, or

other flammable or explosive substances to the

wash water. These substances give off vapors that

could ignite or explode.

Under certain conditions, hydrogen gas may be

produced in a hot water system that has not been

used for two weeks or more. HYDROGEN GAS IS

EXPLOSIVE. If the hot water system has not been

used for such a period, before using a washing

machine or combination washer-dryer, turn on all

hot water faucets and let the water flow from each

for several minutes, This will release any

10,

11,

12,

13.

14.

15.

16.

17.

18.

19.

accumulated hydrogen gas. As the gas is

flammable, do not smoke or use an open flame

during this time.

d. De not wash or dry items that are soiled with

vegetable or cooking oil. These items may contain

some oil after laundering. Due to the remaining oil,

the fabric may smoke or catch fire by itself.

De not reach into the appliance if the tub or agitator

is moving.

Do not allow children or pets to play on, in, or in

front of the appliance. Close supervision is necessary

when the appliance is used near children and pets.

Do not tamper with controls.

De not repair or replace any part of the appliance or

attempt any servicing unless specifically

recommended in published user-repair instructions

that you understand and have the skills to carry out.

Unplug power supply cord before attempting to

service your washer. Service is to be done only by

qualified service personnel,

The agitator should not be removed. If the agitator is

removed, it must be replaced by pushing down

completely and the locking screw tightened before

the washer is operated,

Keep all laundry aids such as detergents, bleach, etc.,

out of the reach of children, preferably in a locked

cabinet. Use laundry aids only as directed by the

manufacturer. Observe all warnings on container labels.

Keep the area around and underneath washer free

from the accumulation of combustible materials, such

as lint, paper, rags, gasoline, and all other flammable

vapors and liquids.

Do not use chlorine bleach and ammonia or acids

(such as vinegar or rust remover) in the same wash,

Hazardous fumes can form,

Do not machine wash fiberglass materials. Small

particles can stick to fabrics washed in following

loads and cause skin irritation,

For flame resistant finishes - follow garment

manufacturer's instructions carefully. Improper

laundering could remove the finish,

Before the appliance is removed from service or

discarded, remove the door to the washing compartment.

Inlet hoses are subject to damage and deterioration

over time. Check the hoses periodically for bulges, kinks,

cuts, wear or leaks and replace them every five years,

SAVE THESE INSTRUCTIONS

Operutin9Tips

Detergent

• Use either liquid or granular laundry detergent. For

best results, he sure detergent is added to the

washer BEFORE the load and he sure the wash

water is above 60 ° F.

• Use the correct amount of detergent for the load size,

soil level and water conditions. Use more detergent if

you have hard water and very soiled loads.

If you have soft water or a lightly soiled load, use less

detergent. (See manufacturer's instructions.)

• Wipe up any detergent spills on the washer.

• For best results add the detergent to the washtub

before adding the load.

• Put dry, unfolded clothes loosely in the tub, up to the

top row of holes for a maximum load.

• Do not wrap large items like sheets around the

agitator.

• Mix large and small items for best circulation. Wash

bulky items like blankets separately.

• When laundering wrinkle-free items or items of

delicate construction, washable woolens or loosely

knit items, never use less than the MEDIUM water

level setting. This will minimize shrinkage, wrinkling

and pulling of seams.

• Close lid carefully to avoid slamming.

Operutin9Tips

Additional Tips

• During the spin, it is possible for the load to become

unevenly distributed in the tub. If this happens, push

in the control dial, open the lid, redistribute the load,

close the lid and restart the washer. The spin will

resume at the point it was interrupted.

• The washer will pause briefly throughout each cycle.

These pauses are normal.

• This washer is designed so that it will not agitate or

spin when the lid is open. It will, however, fill with the

lid open so water is available for pretreating stains or

diluting fabric softener.

• If you open the lid during a spin cycle, the washer

will stop. When the lid is closed and the washer is

restarted, the washer will continue the cycle at the

point it was interrupted.

Usin9theControls- 3SpeedSelectModels

Select Water Level

Determine the selected setting based on clothes load

size. Selection should provide sufficient water to permit

clothes to circulate freely during agitation.

It may become necessary, due to bulky fabrics, to

adjust the water level after agitation begins. To adjust

the water level, turn the control to reset and then back

to the desired setting.

Mini 1//4 Full

Small 1//4- 1/3

Medium 1/3- 1/2

Large 1/2 - 2/3

Super 3//4- Full

I Note: Items must circulate for best results.

freely

Select Wash/Rinse Temperature

Your washer gives you a choice of hot, warm or cold

water for washing and cold or warm water (select

models) for rinsing. Use the chart below as a guide.

White and heavily soiled, color-fast

Hot/Cold

items.

Warm/Warm Moderately soiled, colored items.

(select models)

Warm/Cold Moderately soiled, colored items;

most wrinkle-free items.

Cold/Cold Brightly colored, lightly soiled

items; washable woolens.

Note: In wash water temperatures below 60° E

detergents do not dissolve well or clean well. Care

labels define cold water as up to 85° E

Water Level Extra Rinse

Medium

Small _ _

Mini

Stainless Steel Tub SuperSi

Automatic Temperature Control (A.T.C.)

(select models) provides the optimal wash water

temperatures for cleaning. To save energy, the

Automatic Temperature Control will regulate wash

water temperatures by mixing hot and cold water to

reach the proper water temperature.

ATC Hot/Cold,

ATC Warm/Cold

ATC WamdWann

(select models)

ATC Cold/Cold

These settings feature Automatic

Temperature Control:

Saves energy by adding cold water

to the hot water from your water

heater. Provides optimum cleaning

at lower temperatures.

May add hot water to the incoming

cold water as the washer fills. This

assures that the water will be warm

enough to properly activate

detergent.

Control features vary by model.

Wash/Rinse Tem p

Automatic Temperature Con[to

A,T,C

Cold Warm

Ware /f_ 2_' ,,% A,T,C

:_ Cold

Cold / '% Warm

_ Cold

Hot

cq_

Signal

Capacity / Quiet Series I00 / 3 Speed Select / 17 Cycles

Spin

On _- Rinse

Delicates

Light

Normal _

Off

Extra

Rinse

Ex. Heavy

Extra Off Heavy. Regular

Rinse i_lormal

off

Rinse

Fxtended Sain

off

3ff

Finger

Off Heav_ Fauce[

S_in . Normal

Rinse Light Pull to Start- Push to Stoo

Wrinkle Control

Select Cycle

To select a cycle, push the control dial in (off position)

and turn it to the right (clockwise) until the pointer is at

the soil level needed for the wash load in the Regular,

Wrinkle Control or Delicates cycles.

Regular Cycle

Provides normal agitation and normal spin speeds to

wash cottons and heavily soiled items. For maximum

cleaning, set the dial at Extra Heavy.

Wrinkle Control Cycle

Provides normal agitation and slow spin speed to

protect wrinkle control fabrics.

Delicates Cycle

Provides slow agitation speed and slow spin speed for

delicates and knits.

Select

Options (if desired)

Extra Rinse

When the switch is in the On position, an additional

rinse at the end of the Regular, Wrinkle Control and

Delicates cycles is provided to more completely

remove laundry additives, suds, perfumes, etc.

End of Cycle Signal (select models)

The End of Cycle Signal will sound once the cycle is

completed. The End of Cycle Signal can be canceled by

setting the switch to Off.

Pull Control Dial Out to Start

You may stop the washer at any time by simply

pushing the control dial in. Therefore, it is possible to

obtain a non-agitated soak or to shorten, skip or

repeat any part of a cycle. The control dial must be

pushed in (off position) when you change the setting.

I Note: Do not attempt to turn the control dial

counterclockwise. Damage to the timer will result.

UsingtheControls- 4 SpeedSelectModels

Select Water Level

Determine the selected setting based on clothes load

size. Selection should provide sufficient water to permit

clothes to circulate freely during agitation. On select

models, the Infinite Water Level control allows you to

select a specific setting or anywhere in between.

It may become necessary, due to bulky fabrics, to

adjust the water level after agitation begins. To adjust

the water level, turn the control to reset and then back

to the desired setting.

Mini 1//4Full

Small 1//4- 1/3

Medium 1/3 - 1/2

Large 1/2 - 2/3

Super 3//4 - Full

Note: Items must circulate freely for best results.

Select Wash/Rinse Temperature

Your washer gives you a choice of hot, warm or cold

water for washing and cold or warm water (select

models) for rinsing.

White and heavily soiled, color-fast

Hot/Cold

items.

Warm/Warm Moderately soiled, colored items.

(select models)

Warm/Cold Moderately soiled, colored items;

most wrinkle-free items.

Cold/Cold Brightly colored, lightly soiled

items; washable woolens.

Automatic Temperature Control (A.T.C.) (select

models) provides the optimal wash water temperature

for cleaning. To save energy, this washer will regulate

wash water temperatures by mixing hot and cold water

to reach the proper water temperature.

Infinite Water Level

Medium

Small _*_"'_"0

Mini

Wash/Rinse Tem

AutomatK Temperature Cone

ATC

Cold Warm

Cold

Large

I,, F

i_ Super Warm//'

_' reset Cold

Hot

Cold

Commercial Quality Stainless Steel Tub / SuoerSize

ATC Hot/Cold,

ATC Warm/Cold

ATC WamdWarm

ATC Cold/Cold

These settings feature Automatic

Temperature Control:

Saves energy by adding cold water

to the hot water from your water

heater. Provides optimum cleaning

at lower temperatures.

May add hot water to the incoming

cold water as the washer fills. This

assures that the water will be warm

enough to properly activate detergent.

Select Wash/Spin Speed

Your washer has selectable wash and spin speed

combinations.

Regular

Normal/Fast

Wrinkle Control

Normal/Slow

Delicate

Gentle/Slow

Handwash

Ex. Gentle/Slow

Sturdy fabrics needing maximum

water extraction like jeans, towels

and bedding

Sturdy fabrics needing a slower spin

speed to reduce wrinkling, such as

dress shirts and dress pants

Delicate fabrics needing slower spin

speed because of clothing

construction

Intermittent slow agitation and soak

to gently wash the most delicate items

Note: In wash water temperatures below 60° E

detergents do not dissolve well or clean well.

) Extra Rinse Wash/Spin Speed so_k

Only Off

Off

Extra

W_tinkle Control Delicate Rinse

No_mal/Slo_ GentlelSlow

ATe. On_ _ ;_

Handwash

Warm Reqular _,

Normal/Fast _ _ _ Off

AT.C.

Cold

Spin

Rinse

Extended Spin

_)n

Off

apaoty IQuiet Series I0014Soeed Select / 18 C),cles Wrinkle Control

Select Cycle

To select a cycle, push the control dial in (off position)

and turn it to the right (clockwise) until the pointer is at

the soil level needed for the wash load.

Important: For optimum fabric care, the appropriate

wash and spin speed for the load type must be

selected using the wash/spin speed knob.

Regular Cycle

This cycle provides up to 16 minutes of agitation.

Select the Regular Wash/Spin Speed setting.

Wrinkle Control

This cycle is designed for sturdy fabrics needing a

slower spin speed to reduce wrinkling, such as dress

shirts and dress pants. Select the Wrinkle Control

Wash/Spin Speed setting.

Delicates Cycle

Delicates is designed for items requiring delicate wash

action. Select the Delicates Wash/Spin Speed

setting.

When washing delicate fabrics labeled hand wash,

select the Handwash Wash/Spin Speed setting. This

setting provides intermittent slow agitation and soak

with a slow spin.

Soak Only (select models)

Provides 4 minutes of agitation, then soak. Avoid

extended soaking - soak for 30 minutes or less.

The control dial must be manually advanced to a spin

setting to spin and drain the water.

Select

Options (if desired)

Extra Rinse

When the knob is in the On position, an additional

rinse at the end of the Regular, Wrinkle Control and

Delicates cycles is provided to more completely

remove laundry additives, suds, perfumes, etc.

End of Cycle Signal (select models)

The end of cycle signal will sound once the cycle is

completed. The end of cycle signal can be canceled by

setting the switch to Off.

Pull Control Dial Out to Start

You may stop the washer at any time by simply

pushing the control dial in. Therefore it is possible to

obtain a non-agitated soak or to shorten, skip or

repeat any part of a cycle. The control dial must be

_ushed in (off position) when you change the setting.

Note: Do not attempt to turn the control dial

counterclockwise. Damage to the timer will result.

UsingtheControls- ElectronicControlModels

Getting Started

1. Add detergent and additives to the washer.

2. Load the washer.

3. Close the lid.

4. Select the appropriate cycle and options for the load.

5. Press the Cycle Selector dial.

6. The Fill indicator light will illuminate and the washer

will start to fill.

Note: The lid must be completely closed in order I

to operate the washer controls.

Infinite Water Level

Medium

Mini _ j queer

rese_

Extra Rinse

Off On

Select Water Level

Determine the selected setting based on clothes load

size. Selection should provide sufficient water to permit

clothes to circulate freely during agitation.

It may become necessary, due to bulky fabrics, to

adjust the water level after agitation begins. To adjust

the water level, turn the Infinite Water Level control to

reset and then back to the desired setting.

Mini 1//4 Full

Small 1//4- 1/3

Medium 1/3- 1/2

Large 1/2 - 2/3

Super 3//4- Full

I Note: Items must circulate for best results.

freely

Commercial Qual{ty Stainless Steel Tub / Supe_Size Cap

HotJCold White and heavily soiled, color-fast

(select models) items.

Warm/Warm Moderately soiled, colored items.

(select models)

Warm/Cold Moderately soiled, colored items;

(select models) most wrinkle-free items.

Cold/Cold Brightly colored, lightly soiled

items; washable woolens.

Automatic Temperature Control (A.T.C.) provides

the optimal wash water temperature for cleaning. To

save energy, this washer will regulate wash water

temperatures by mixing hot and cold water to reach

the proper water temperature.

Select Wash/Rinse Temperature

Your washer gives you a choice of hot, warm or cold

water for washing and cold water or warm water

(select models) for rinsing. Use the chart as a guide.

These settings feature Automatic Temperature Control:

Saves energy by adding cold water

ATC Hot/Cold,

to the hot water from your water

ATC Warm/Cold

ATCWarm/Warm heater. Provides optimum cleaning

(select models) at lower temperatures.

May add hot water to the incoming

cold water as the washer fills. This

ATC Cold/Cold

assures that the water will be warm

enough to properly activate detergent.

Control features vary by model.

Wash/Rinse Temp

Soil Selection

Cold Warm

Cold Cold /ormal _eavy

HOt

_Coid Dght

Fabric Selection

_rir_kle Control

DeIicates

ilaRdwasn

OuickWash

:)1

off

Signal

_zy / Quiet Ser_e_200 / 5 Speed Select / 21 Cycles

Soil Selection

Your washer has selectable soil level settings.

.........................................................................

Light Use for cleaning lightly soiled loads.

Normal Use for cleaning moderately soiled

loads. This setting will be appropriate

for most loads.

Heavy Use for cleaning heavily soiled loads.

Extra Heavy Use for cleaning stained, heavily

soiled sturdy loads.

Fabric Selection

Select the appropriate fabric cycle for the type of load

by turning the cycle selector dial until the indicator

light by the desired fabric selection is illuminated.

Quick Wash

Gentle/Fast

Hand Wash

Ex. Gentle/Slow

Delicates

Gentle/Slow

Wrinkle Control

Medium/Slow

Regular

Medium/Fast

For lightly soiled or wrinkled

garments needed quickly.

Provides intermittent agitation and

soak. For wool, silk, and other

hand-wash-only fabrics.

For sheer fabrics, bras and lingerie

needing slower agitation and spin

speeds because of clothing

construction.

For "wash and wear" and synthetic

fabrics and lightly to normally soiled

garments needing a slower spin

speed to reduce wrinkling.

For most sturdy fabrics including

cottons, linens and normally soiled

garments needing maximum water

extraction.

UsingtheControls- ElectronicControlModels

Soak Only [selectmodels)

Provides approximately 33 minutes of alternating

periods of soaking with brief agitation at slow speed.

At the end of the cycle, the Cycle Selector dial must be

manually set to a wash cycle or spin cycle to drain the

washer. Avoid extended soaking.

Spin Only

Provides a spin to remove more water from the load.

Rinse and Spin

Use for loads that need rinsing only or to add rinse-

added fabric softener to a load.

Power Off

To cancel the cycle and turn off the washer, turn the

Cycle Selector dial to Power Off and push the dial in.

F_¢i c _eledi_n

Select Options

Extra Rinse

When the knob is in the On position, an

additional rinse at the end of all cycles

is provided to more completely remove

laundry additives, suds, perfumes, etc.

Extra Rinse

Off On

End of Cycle Signal

The end of cycle signal will sound once the on

cycle is completed. On select models, the

end of cycle signal can be canceled by off

setting the switch to Off.

Signal

Start the Washer

To start the washer, press the cycle selector dial.

Changing a Cycle

If an incorrect cycle has been accidentally

selected:

1. Press the cycle selector dial.

2. Turn the cycle selector dial to the desired cycle.

3. Set the desired options for the cycle.

/4. Press the cycle selector dial. The Wash indicator

lights stop flashing and the new cycle starts.

Canceling a Cycle

To cancel a cycle:

1. Press the cycle selector dial.

2. Turn the cycle selector dial to Power Off and push

the dial in.

To drain the washer:

1. Select the Rinse and Spin or Spin Only cycle.

2. Press the cycle selector dial. The Spin light

illuminates and the washer starts the rinse or spin.

SpecialFeatures

Liquid Bleach Dispenser

The dispenser automatically dilutes liquid chlorine

bleach before it reaches your wash load.

To use, follow these steps:

1. Measure liquid chlorine bleach carefully, following

the instructions on the bottle.

2. Pour liquid chlorine bleach into bleach

dispenser before adding the load. Avoid splashing

or over-filling the dispenser.

Notes:

• Never pour undiluted liquid chlorine bleach

directly onto the load or into the wash tub. It is a

powerful chemical and can cause fabric damage,

such as tearing or color loss, if not used properly.

• If you prefer to use color-safe, non-chlorine

bleach, pour it into the wash tub with your

detergent. Do not pour non-chlorine bleaches into

the bleach dispenser.

Finger Faucet Cselect models)

Provides a flow of water when holding the r_

switch in the On position, f_

Fabric Softener Dispenser

The dispenser automatically releases liquid fabric

softener at the proper time during the cycle.

To use, follow these steps:

1. Pour a measured amount of fabric softener into

the dispenser to fill line only.

2. If fabric softener comes below line, add warm

water.

If it is necessary to clean the dispenser:

1. Pull the dispenser off of the top of the agitator.

2. Soak for one hour in sink or container in hot water

and dishwashing liquid.

3. Hold hands over top and bottom of dispenser and

shake to loosen buildup.

/4. Rinse with clean, hot water.

5. Repeat process if necessary.

6. Replace dispenser on agitator.

Do not use dishwashing liquid

inside the washer. Oversudsing

can occur.

Automatic Lint Filtering System

The Lint Filtering System does not require

cleaning.

Wash and rinse water is filtered and re-filtered

continuously to trap lint shed by most fabrics during

the agitation cycle before it can be redeposited on the

wash load. The engineered hole design on the wash

basket in conjunction with water flow produced by the

agitator, traps lint away from the clothes between the

inner wash basket and the outer tub. Lint is

automatically flushed from the washer during the spin

cycle.

Safety Spin

If for any reason you open the washer lid when the

washer is in a spin or extract period, the operation will

immediately stop. This is for your personal safety. If

your washer does not stop, call your service technician

immediately. When the lid is closed, the operation will

automatically resume.

SpecialFeatures

Unbalanced Spin Load

Compensator

Your new washer is designed to handle out-of-balance

loads without shutting down or interrupting the

washing cycle.

For this reason, the cycle will always be completed. If

heavier fabrics in such out-of-balance loads should

ever contain excessive moisture at the completion of

the cycle, redistribute the clothes in the washer and

reset the control dial for the final spin period.

Overload Protector

A built-in protector automatically shuts off the washer

motor in case of an overload. This can occur if:

• The load being washed is too heavy.

• Too many appliances are plugged into the line

operating your washer.

• A low voltage condition exists on the line.

• Lid is opened and closed repeatedly.

The overload protector permits the washer to start again

when the motor has cooled to a safe operating temperature.

If the motor stops repeatedly, call your service technician.

Care&Cleaning

10.

11.

1. After washing, leave the lid open until the interior

is dry.

2. Check hoses to be sure there are no kinks or knots.

3. Your washer should not be installed where

temperatures will go below freezing, as damage to

the washer could result.

4. To clean, occasionally wipe exterior with a clean

damp sponge or cloth. Do not use polish on

plastic parts.

5. Lifetime lubrication is done at the factory, so your

washer never needs to be oiled or greased.

6. Do not lay heavy or sharp objects on top of your

washer.

The top of the washer should not be used for

removing stains from garments. Some stain

removers, such as rust remover, will mar the finish.

Remove pins, buckles or other sharp objects from

clothes to prevent scratching interior parts.

Clothes should not be stored in washer.

Bleach, detergent, solvents, etc. spilled on the top

of your washer that are allowed to remain will

remove the glossy finish. Remove all spills with a

damp, soft cloth.

If you close your home for the winter, have a service

technician drain the washer. Unplug cord from

electrical outlet and disconnect hoses from faucets.

Cleaning the Interior

Clean the interior of the washer periodically to remove

any dirt, soil, odor, mold, mildew or bacteria residue

that may remain in the washer as a result of washing

clothes. We recommend taking the following steps

every 60 to 120 days to clean and freshen your washer

interior. The frequency with which the washer should

be cleaned and freshened depends on factors such as

usage, the amount of dirt, soil or bacteria being run

through your washer, or the use of cold water. Failure

to follow these instructions may result in unsatisfactory

conditions, including unpleasant odor and/or

permanent stains on the washer or washload.

To clean and freshen the washer interior:

1. Add a measured amount of chlorine bleach to the

bleach dispenser, following package directions.

2. Add 1//4 cup of detergent to the tub.

3. Run the washer without a load through a complete

cycle using hot water.

/4. Repeat the process if necessary.

Troubleshooting

Won't Fill

Won't Agitate

Won't Spin

or Drain

Load is Wet

Stops

Leaks Water

Is Noisy

Fills with

the Wrong

Temperature

Water

Cycle Selector

Advances Through

Off

• Plug cord into live electrical outlet.

• Check fuse or reset circuit breaker.

• Turn the control dial to proper cycle and restart the washer.

• Turn both faucets on fully.

• Straighten inlet hoses.

• Disconnect hoses and clean screens. Hose filter screens may be plugged.

• Check fuse or reset circuit breaker.

• Make sure the lid is completely closed.

• Turn the control dial to proper cycle and restart the washer.

• Pauses are normal. Wait and see if the washer will start again.

• Check fuse or reset circuit breaker.

• Straighten drain hoses. Eliminate kinked hoses. If there is a home drain restriction, call for

drain service.

• Close lid and restart the washer. For your safety, washer will not spin unless the lid is closed.

• Suds lock - caused by too much suds. Rewash without detergent. Use correct amount of a

low-sudsing detergent.

• Unevenly distributed load. Redistribute the load, close the lid and restart the washer. Check for

leveling. Be sure water level is acceptable for load size.

• A normal spin speed is recommended for heavy loads like jeans or towels.

• Plug cord into live electrical outlet.

• Check fuse or reset circuit breaker.

• Close lid and restart the washer. For your safety, washer will not agitate or spin unless lid is closed.

• This may be a pause in the cycle. Wait briefly and it may start.

• Make sure hose connections are tight.

• Make sure end of drain hose is correctly inserted and secured to drain facility.

• Avoid extended soaking - soak for 30 minutes or less.

• Avoid overloading.

• Be sure washer is leveled properly as outlined in installation manual.

• Weak floors can cause vibration and walking.

• Operating sounds will vary depending on agitation speed.

• Turn both faucets on fully.

• If equipped with a temperature selector dial, be sure it is set directly on a temperature setting and

not between settings.

• Make sure temperature selection is correct.

• While the washer is filling, you may notice just hot and/or just cold water entering the tub when

cold or warm wash temperatures are selected. This is a normal function of the Automatic

Temperature Control (select models_ feature as the washer determines the temperature of

the water.

• If Auto Temperature Control (select models_ is selected, cold water may feel warmer than cold

water from the tap.

• Make sure hoses are connected to correct faucets and inlet connections. Be sure water supply is

regulated correctly. Flush water line before filling washer.

• Check the water heater. It should be set to deliver a minimum 120° F (49° C_hot water at the tap.

Also check water heater capacity and recovery rate.

• Disconnect hoses and clean screens. Hose filter screens may be plugged.

• Extra Rinse (select models_ is selected.

Wurru,t¥& Service

CUSTOMER'S SOLE AND EXCLUSIVE

REMEDY UNDER THIS LIMITED

WARRANTY SHALL BE PRODUCT REPAIR

AS PROVIDED HEREIN. IMPLIED

WARRANTIES, INCLUDING WARRANTIES

OF MERCHANTABILITY OR FITNESSFOR

A PARTICULAR PURPOSE,ARE LIMITED

TO ONE YEAR ORTHE SHORTEST

PERIODALLOWED BY LAW. MAYTAG

CORPORATION SHALL NOT BE LIABLE

FOR INCIDENTAL OR CONSEQUENTIAL

DAMAGES. SOME STATESAND

PROVINCES DO NOT ALLOW THE

EXCLUSION OR LIMITATION OF

INCIDENTAL OR CONSEQUENTIAL

DAMAGES, OR LIMITATIONS ON THE

DURATION OF IMPLIED WARRANTIES OF

MERCHANTABILITY OR FITNESS,SO

THESE EXCLUSIONS OR LIMITATIONS

MAY NOT APPLY TOYOU. THIS

WARRANTY GIVESYOU SPECIFICLEGAL

RIGHTSAND YOU MAY ALSO HAVE

OTHER RIGHTS,WHICH VARY STATETO

STATEOR PROVINCE TO PROVINCE.

What is Not Covered By These Warranties

1. Conditions and damages resulting from any of the following:

a. Improper installation, delivery, or maintenance.

b. Any repair, modification, alteration, or adjustment not authorized by the

manufacturer or an authorized servicer.

c. Misuse, abuse, accidents, unreasonable use, or acts of God.

d. Incorrect electric current, voltage, electrical and/or gas supply.

e. Improper setting of any control.

2. Warranties are void if the original serial numbers have been removed, altered,

or cannot be readily determined.

3. Light bulbs, water filters and air filters.

4. Products purchased for commercial or industrial use.

5. The cost of service or service call to:

a. Correct installation errors. Forproducts requiring ventilation, rigid metal

ducting must be used.

b. Instruct the user on the proper use of the product.

c. Transport the appliance to and from the servicer.

6. Any food loss due to refrigerator or freezer product failures.

7. Expenses for travel and transportation for product service in remote locations.

8. Outside of the United States and Canada this warranty does not apply.

Contact your dealer to determine if another warranty applies.

9. Consequential or incidental damages sustained by any person as a result of

any breach of these warranties. Some states do not allow the exclusion or

limitation of consequential or incidental damages, so the above exclusion may

not apply.

If You Need Service

First see the Troubleshooting section in your Use and Care Guide or call the

dealer from whom your appliance was purchased or call Maytag Services, LLC,

Customer Assistance at 1-800-688-9900 USA and 1-800-688-2002 Canada to

locate an authorized servicer.

• Besure to retain proof of purchase to verify warranty status. Refer to WARRANTY

for further information on owner's responsibilities for warranty service.

• If the dealer orservice company cannot resolve the problem, write to Maytag

Services, LLC,Attn: CAIR Center, EO. Box 2370,Cleveland,TN 37320-2370,or call

1-800-688-9900 USA and 1-800-688-2002 Canada. U.S.customers using

TTY for deaf, hearing impaired or speech impaired, call 1-800-688-2080.

• User'sguides, service manuals and parts information are available from Maytag

Services, LLC,Customer Assistance.

Notes: When writing or calling about a service problem, please include:

a. Your name, address and telephone number;

b. Model number and serial number;

c. Name and address of your dealer or servicer;

d. A clear description of the problem you are having;

e. Proof of purchase (sales receipt).

MAV-1

lUl

Table des mati_res

Importantes consignes

de s_curit_ ............. 17-18

Caractbristiques

sp6ciales .............. 29-30

Fonctionnement ........ 19-20

Nettoyage et entretien ..... 30

Utilisation des commandes

ModUles _ trois vitesses .... 21-22

Modbles _ quatre vitesses ... 23-25

ModUles _lectroniques ..... 26-28

Recherche des pannes .. 31-32

Garantie et service

aprbs-vente ............... 33

Guia de uso y cuidado ..... 34

Importnntesconsignesdesecurit6

Ce qu'il faut savoir _ propos

des consignes de s_curitd

Les consignes de s6curit6 et les mises en garde pr6sent6es

dans ce guide ne couvrent pas toutes les situations

possibles. Faire preuve de jugement, de prudence et

d'attention Iors de I'installation, de I'entretien et de

I'utilisation de I'appareil.

Lorsque survient un probleme ou une situation inhabituelle,

toujours communiquer avec le fabricant.

Reconnaissez les _tiquettes, phrases

ou symboles sur la securite

Importnntesconsignesdesecurit6

1. Lire toutes les instructions avant d'utiliser la laveuse.

2. Comme avec tout equipement fonctionnant _ I'electricite

et comportant des pieces mobiles, il existe toujours des

possibilites de danger. Pour utiliser cette machine dans

les meilleures conditions de securite, I'operateur doit se

familiariser avec les instructions de fonctionnement de

I'appareil et user de prudence pendant son utilisation.

3. Ne pas installer ni remiser la laveuse dans un endroit

ot] elle est exposee aux intemperies.

4. Installer la laveuse et la mettre de niveau sur un

plancher pouvant supporter son poids.

5. Cet appareil doit etre correctement mis _ la terre. Ne

jamais brancher le cable electrique d'une laveuse sur

une prise murale non mise _ la terre conformement aux

codes Iocaux et nationaux. Voir les instructions

d'installation pour la mise _ la terre de cette machine.

6. Pour eviter les risques d'incendie ou d'explosion :

a. Ne pas laver d'articles qui ont auparavant ete

nettoyes ou laves _ I'aide d'essence, de solvants de

nettoyage _ sec ou d'autres produits explosifs ou

inflammables, ou qui en sont imbibes ou eclabousses,

car ces substances produisent des vapeurs qui

peuvent s'enfiammer ou exploser. Laver _ la main et

secher _ I'air tout article contenant ces substances.

Tout tissu sur lequel des solvants de nettoyage ont

ete utilises ou qui est sature de liquides ou solides

inflammables ne doit pas etre mis dans la laveuse

avant que toute trace et toute vapeur de ces liquides

ou solides ne soient completement eliminees.

Ces produits comprennent I'acetone, I'alcool

denature, I'essence, le kerosene, certains produits de

nettoyage menagers, les detachants, la terebenthine,

les cires et les dec@ants de cire.

b. Ne pas ajouter d'essence, de solvants de nettoyage

sec ou toute autre substance inflammable ou

explosive _ I'eau de lavage. Cessubstances produisent

des vapeurs qui pourraient s'enflammer ou exploser.

c. Dans certaines conditions, il peut y avoir production

d'hydrogene dans un systeme de chauffage d'eau qui

n'est pas utilise pendant 2 semaines ou plus.

L'HYDROGI_NEESTUN GAZ EXPLOSIF.Si le systeme

de chauffage d'eau n'est pas utilise sur une telle

duree, ouvrir tousles robinets d'eau chaude et laisser

couler I'eau pendant plusieurs minutes avant d'utiliser

la laveuse ou la ensemble laveuse-secheuse. Ceci

elimine toute accumulation d'hydrogene. Ce gaz etant

inflammable, ne pas fumer ni utiliser de flamme vive

pendant cette procedure.

d. Ne pas laver ou secher d'articles taches d'huile

vegetale ou de cuisson. Ces articles pourraient etre

encore impregnes d'huile apres la lessive. Pour cette

raison, le tissu pourrait emettre des fumees ou

prendre feu de lui-meme.

Z Ne pas mettre la main ou le bras dans la laveuse si

I'agitateur ou cuve est en mouvement.

8. Ne pas permettre aux enfants ou aux animaux familiers

de jouer sur I'appareil, _ I'interieur ou en face de celui-

ci. Une supervision etroite est necessaire Iorsque

I'appareil est utilise _ proximite d'enfants ou d'animaux

familiers.

9. Ne pas modifier les mecanismes de commande.

10. Ne pas r@arer ou remplacer une piece de la laveuse

ou proceder _ un d@annage, sauf si les instructions

publiees le recommandent et que la personne effectuant

la r@aration les comprend et possede les

connaissances voulues pour les executer.

11. Debrancher le cordon d'alimentation electrique avant

d'essayer de r@arer la laveuse. Les reparations ne

doivent etre effectuees que par du personnel qualifi&

12. I'agitateur ne doit pas etre retire. S'il est retire, le

replacer en I'enfon(_ant_ fond, puis serrer la vis de

blocage avant de faire fonctionner la laveuse.

13. Conserver tousles produits de lessive, les detergents,

les produits de blanchiment, etc., hors de portee des

enfants, et de preference dans une armoire fermee

cle. N'utiliser ces produits que selon les directives du

fabricant. Observer tousles avertissements paraissant

sur les etiquettes des differents produits.

14. S'assurer que toute la zone autour de la laveuse et en

dessous, soit degagee de toute accumulation de

materiaux combustibles comme charpie, papier, chiffons,

essence et tout autre liquide ou vapeur inflammable.

15. Ne pas melanger de javellisant et d'ammoniaque ou

d'acides (tels que du vinaigre ou du produit pour enlever

la rouille) pour une meme charge de linge. Desvapeurs

nocives peuvent se former.

16. Ne pas laver d'articles en fibre de verre _ la laveuse. De

petites particules peuvent se coller sur le linge lave par

la suite et provoquer des irritations cutanees.

1Z Apprets resistants aux flammes - suivre attentivement

les instructions du fabricant du vetement. Un vetement

incorrectement lave ou seche pourrait perdre son appret

ignifuge.

18. Avant de mettre la laveuse hors service ou au rebut,

retirer la porte du compartiment de lavage.

19. Les tuyaux d'alimentation se deteriorent progressivement.

Inspecter les tuyaux _ intervalle regulier; rechercher

dilatations, ecrasements, coupures, fuites et indices

d'usure. Remplacer les tuyaux apres 5 ans de service.

CONSERVER CES INSTRUCTIONS

I:oncdonnement

Ddtergent

• Utiliser du d6tergent liquide ou en poudre. Pour des

r_sultats optimums, ajouter suffisamment de

d_tergent darts la laveuse AVANT de la remplir et

r_gler la temperature de I'eau _ plus de 16 °C (60 °F).

• Utiliser la quantit6 de d6tergent qui convient _ la charge,

au degr6 de salet6 et _ la duret6 de I'eau. Utiliser plus de

d6tergent si I'eau est dure et que la charge est tr6s sale.

Si I'eau est douce ou que la charge est peu sale, utiliser

moins de d6tergent. (Voirles instructions du fabricant.)

Essuyer la laveuse si elle se trouve 6clabouss6e de

d6tergent.

Chargement

• Pour des r6sultats optimums, mettre du d6tergent dans la

cuve avant d'ajouter le linge.

• Mettre le linge sec, non pli6 sans le tasser dans la laveuse,

en remplissant le panier jusqu'au rang sup6rieur de trous

pour une charge maximum.

• Ne pas enrouler de grands articles tels que des draps

autour de I'agitateur.

• Pour une meilleure circulation, m61anger les petits et les

grands articles. Laver les articles volumineux comme les

couvertures s@ar6ment.

Lors du lavage d'articles infroissables, fragiles, de lainages

lavables ou d'articles en tricot _ mailles laches, ne jamais

utiliser un niveau d'eau inf_rieur au r6glage MEDIUM

(moyen). IIs auront moins tendance _ r6tr6cir, _se froisser

et les coutures tiendront mieux.

Refermer soigneusement le couvercle pour qu'il ne

claque pas.

La page charge ...

Maytag MAV2757AWW Le manuel du propriétaire

Marque: Maytag

Modèle: MAV2757AWW

Catégorie: Machines à laver

Taper: Le manuel du propriétaire

Ce manuel convient également à

Télécharger le PDF

rapport

dans d''autres langues

English: Maytag MAV2757AWW Owner's manual
español: Maytag MAV2757AWW El manual del propietario

Maytag MAV2757AWW Le manuel du propriétaire

Ce manuel convient également à

Maytag MAV2757AWW Le manuel du propriétaire

dans d''autres langues

Documents connexes

Autres documents