NAPOLEON PT600RBI Le manuel du propriétaire
- Catégorie
- Barbecues
- Taper
- Le manuel du propriétaire
:
APPLY SERIAL NUMBER LABEL FROM CARTON
Serial No.
XXXXXX000000
MODEL NO.
INFRARED
N415-0204 FEB 17/10
2
www.napoleongrills.com
NAPOLEON warrants the following materials and workmanship in your new NAPOLEON
gas grill against defects for as long as you own the gas grill. This covers aluminum casngs
(excluding paint), stainless steel base, stainless steel control panel (excluding screen print-
ing), stainless steel burners, stainless steel rod cooking grids, stainless steel side shelves,
LUXIDIO® side shelf end caps, wheels, knobs, porcelain enameled lids and stainless steel lids,
subject to the following condions: During the rst ten years NAPOLEON will provide re-
placement parts at our opon free of charge. From the eleventh year to lifeme, NAPOLEON
will provide replacement parts at 50% of the current retail price.
Components such as stainless steel sear plates, ceramic infrared burners (excluding screens),
cast iron cooking grids, igniter (excluding baeries), temperature gauge and brass valves are
covered and NAPOLEON will provide parts free of charge during the rst three years of the
limited warranty.
Components such as regulators, casters, stainless steel warming racks, hoses and connectors,
fasteners and accessories are covered and NAPOLEON will provide parts free of charge dur-
ing the rst year of the limited warranty.
NAPOLEON shall not be liable for any transportaon charges, labor costs or export dues.
All NAPOLEON gas grills are manufactured under the strict Standard of the world recognized ISO 9001-2008
Quality Assurance Cercate.
NAPOLEON products are designed with superior components and materials, and are assembled by trained
crasmen who take great pride in their work. The burner and valve assembly are leak tested and test-red at
a quality test staon. This grill has been thoroughly inspected by a qualied technician before packaging and
shipping to ensure that you, the customer, receive the quality product you expect from NAPOLEON.
“NAPOLEON warrants its products against manufacturing defects to the original purchaser only, provided that the purchase was made through an autho-
rized NAPOLEON dealer and is subject to the following condions and limitaons:”
This factory warranty is non-transferable and may not be extended what-so-ever by any of our representaves.
The gas grill must be installed by a licensed, authorized service technician or contractor. Installaon must be done in accordance with the installaon
instrucons included with the product and all local and naonal building and re codes.
This limited warranty does not cover damages caused by misuse, lack of maintenance, grease res, hosle environments, accident, alteraons, abuse or
neglect and parts installed from other manufacturers will nullify this warranty.
This limited warranty further does not cover any scratches, dents, painted nishes, corrosion or discoloring by heat, abrasive and chemical cleaners, nor
chipping on porcelain enamel parts, nor any components used in the installaon of the gas grill.
Should deterioraon of parts occur to the degree of non-performance within the duraon of the warranted coverage, a replacement part will be provided.
In the rst year only, this warranty extends to the replacement of warranted parts, which are defecve in material or workmanship provided that the prod-
uct has been operated in accordance with the operaon instrucons and under normal condions.
Aer the rst year, with respect to this President’s Limited Lifeme Warranty NAPOLEON may, at its discreon, fully discharge all obligaons with respect to
this warranty by refunding to the original warranted purchaser the wholesale price of any warranted but defecve part(s).
NAPOLEON will not be responsible for the installaon, labor or any other costs or expenses related to the re-installaon of a warranted part, and such
expenses are not covered by this warranty.
Notwithstanding any provision contained in this President’s Limited Lifeme Warranty NAPOLEON’s responsibility under this warranty is dened as above
and it shall not in any event extend to any incidental, consequenal, or indirect damages.
This warranty denes the obligaon and liability of NAPOLEON with respect to the NAPOLEON gas grill and any other warranes expressed or implied with
respect to this product, its components or accessories are excluded.
NAPOLEON neither assumes, nor authorizes any third party to assume, on its behalf, any other liabilies with respect to the sale of this product.
NAPOLEON will not be responsible for: over ring, blow outs caused by environmental condions such as strong winds, or inadequate venlaon,
Any damages to the gas grill due to weather damage, hail, rough handling, damaging chemicals or cleaners will not be the responsibility of NAPOLEON.
The bill of sale or copy will be required together with a serial number and a model number when making any warranty claims from NAPOLEON.
NAPOLEON reserves the right to have its representave inspect any product or part prior to honoring any warranty claim.
NAPOLEON shall not be liable for any transportaon charges, labor costs, or export dues.
3
www.napoleongrills.com
• This gas grill must be assembled exactly according to the instrucons in the manual. If the grill was store
assembled, you must review the assembly instrucons to conrm correct assembly and perform the re-
quired leak tests before operang the grill.
• Read the enre instrucon manual before operang the gas grill.
• This gas grill must be used only outdoors in a well-venlated space and must not be used inside a building,
garage, screened-in porch, gazebo or any other enclosed area.
• This gas grill must not be installed in or on recreaonal vehicles and/or boats.
• Do not locate unit in windy sengs. High winds adversely aect the cooking performance of the gas grill.
• Under no circumstances should this gas grill be modied.
• Do not operate unit under overhead combusble construcon.
• Maintain proper clearance to combusbles (16” (410mm) to rear of unit, 7” (178mm) to sides). Addional
clearance of (24” (610mm) is recommended near vinyl siding or panes of glass.
• Gas must be turned o at the propane cylinder or at the natural gas supply valve when the gas grill is not
in use.
• Do not aempt to use a cylinder that is not equipped with a QCC1 type connecon.
• When the propane cylinder is connected to the appliance, the gas grill and cylinder must be stored out-
doors in a well-venlated space.
• When the gas grill is to be stored indoors, the connecon between the propane cylinder and the gas grill
must be disconnected and the cylinder removed and stored outdoors in a well venlated space out of
reach of children. Disconnected cylinders must not be stored in a building, garage or any other enclosed
area. Natural gas units must be disconnected from the supply when being stored indoors.
• Inspect the fuel supply hose before each use. If there is evidence of excessive abrasion or wear or the hose
is cut, it must be replaced prior to using the gas grill with a replacement hose assembly specied by the
grill manufacturer.
• Do not route hose underneath drip pan - proper hose clearance to boom of unit must be maintained.
• Hose must not run behind the front leg. It must run around the front side of leg (if applicable).
• Leak test the unit before inial use, annually, and whenever any gas components are replaced.
• Follow lighng instrucons carefully when operang grill.
• Burner controls must be o when turning supply cylinder valve on.
• The lid is to be closed during the gas grill preheang period on all models except the BISZ300NFT/PFT and
the built-in side burner BISB245.
• The BISZ300NFT/PFT and the built-in side burner BISB245 are supplied with a at cover for storage and
protecon from the elements. Never place this cover on the grill while hot or operang. Allow grill to cool
completely before covering.
• Adults and especially children should be alerted to the hazards of high surface temperatures. Young chil-
dren should be supervised near the gas grill.
• Do not leave grill unaended when operang.
• Do not light burners with lid closed.
• Do not operate rear burner with main burners operang.
• Do not move grill when hot or operang.
• Do not use condiment tray to store lighters, matches or any other combusbles.
• Keep any electrical supply cord and fuel supply hose away from any heated surfaces.
• Ensure sear plates are posioned properly according to sear plate installaon instrucons. The holes must
be towards the front of the gas grill (if applicable).
• Clean grease tray and sear plates regularly to avoid build-up, which could lead to grease res.
• Remove warming rack before lighng rear burner. The extreme heat will damage the warming rack.
• Inspect infrared burner venturi tube for spider webs and other obstrucons periodically. Clean the tubes
completely if you nd any such obstrucons.
• Do not allow cold water (rain, sprinkler, hose, etc.) to come in contact with heated unit. A large tempera-
ture dierenal can cause chipping in the porcelain.
• Do not allow cold water (rain, sprinkler, hose, etc.) to come in contact with ceramic burners. A large tem-
perature dierenal can cause cracking in the ceramic le.
• Do not use a pressure washer to clean any part of the unit.
4
www.napoleongrills.com
This Gas Barbecue Is Cered Under Canadian And American Naonal Standards, CAN/CGA-1.6-M95 AND
ANSI Z21.58 -1995 respecvely for Outdoor Gas Grills and should be installed to conform with local codes.
In absence of local codes, install to the current CAN1-B149.2 Propane Installaon Code in Canada or to the
Naonal Fuel Gas Code, ANSI Z223.1 in the United States.
If a rosserie motor is used, it must be electrically grounded in accordance with local codes or, in absence of
local codes, with the current CSA C22.1 Canadian Electrical Code in Canada or the Naonal Electrical Code,
ANSI/NFPA 70 in the United States.
: The burning of gas fuel creates by-products, some of which are on the list as
substances known by the State of California to cause cancer or reproducve harm. When cooking with gas,
always ensure adequate venlaon to the unit, to minimize exposure to such substances.
Propane Cylinder Specicaons
A dented or rusty cylinder may be hazardous and should be checked by your propane supplier. Never use a
cylinder with a damaged valve. Use only a propane supply cylinder constructed and marked in accordance
with the specicaons for LP-gas cylinders of the Naonal Standard of Canada, CAN/CSA-b339, Cylinders,
Spheres and Tubes for Transportaon of Dangerous Goods; and Commission, as applicable or the Specica-
ons for LP-Gas Cylinders of the U.S. Department of Transportaon (D.O.T.). This appliance has been designed
for use with a 20 lb. (9.1 kg) size propane cylinder only (not supplied).
The propane cylinder must be provided with a cylinder connecon device compable with the connecon
for outdoor cooking appliances.The propane cylinder must be provided with a shut-o valve terminang in
a propane cylinder valve type QCC1, and a safety relief device having direct communicaon with the vapor
space of the cylinder. The cylinder supply system must be arranged for vapor withdrawal and the cylinder
shall include a collar to protect the cylinder valve. The cylinder shall incorporate a listed OPD (overll protec-
on device). Do not store a spare LP-gas cylinder under or near this appliance. Never ll the cylinder beyond
80 percent full.
Use only the pressure regulator and hose assembly provided with this barbecue. Replacement pressure regu-
lators and hose assemblies must be specied by the manufacturer. Do not store a spare propane cylinder on
the shelf beneath the barbecue.
The regulator supplies a pressure of 11 inches. water column to the gas grill and has a QCC1 type ng. Cyl-
inders to be used with this unit must be supplied with a QCC1 cylinder valve. A QCC1 cylinder has a posive
seang connecon, which will not allow gas ow unl a posive seal has been achieved. It is also equipped
with an excess ow device. In order to aain full ow to the grill, the valves must be in the o posion when
the cylinder valve is turned on.
Gas Hook-Up Instrucons
: Set cylinder into hole in boom shelf.
: Ensure the gas regulator hose is kink free. Remove the cap or plug from the cylinder fuel
valve. Insert the black QCC1 regulator nipple onto the QCC1 fuel valve. Hand ghten clockwise. Do not use
tools. Leak test all joints prior to using the grill. A leak test must be performed annually and each me a cylin-
der is hooked up or if a part of the gas system is replaced.
If this grill is to be connected directly to a house propane gas supply line, follow the instrucons for the natural
gas hook-up. Oponal side burners must also follow the natural gas hook-up instrucons. Note: The propane
tank heat shield is not required when the grill is connected to a xed fuel supply, as its sole funcon is to shield
the propane tank normally used with the grill. Ensure that the supply pressure is 11 inches water column.
5
www.napoleongrills.com
: These connecons must be made by a licensed gas er. This natural gas grill is sup-
plied with a gas supply hose (complete with a quick disconnect) designed for natural gas and cered for
outdoor use. The gas grill is designed to operate at an inlet pressure of 7 inches water column. Piping and
valves upstream of the quick disconnect are not supplied. The installaon must comply with CAN B149.1
Natural Gas and Propane installaon code in Canada, or to the Naonal Fuel Gas Code, ANSI Z223.1 in the
United States. The gas supply pipe must be suciently sized to supply the BTU/h specied on the rang
plate, based on the length of the piping run.
The quick disconnect must not be installed in an upward direcon and a readily accessible manual shut-o
valve must be installed upstream of, and as close to, the quick disconnect as is feasible. The ared end of
the hose must be connected to the ng on the end of the manifold tube or ex tube (if applicable) as
illustrated in the Natural Gas Hose Aachment diagram. Tighten using two wrenches. (Do not use thread
sealer/pipe dope.) Leak test all joints prior to using the gas grill.
• The installaon must be performed by a licensed gas er, and all connecons must be leak tested before
operang the grill.
• Do not route hose underneath the drip pan.
• Do not route hose between boom shelf space and back panel.
• Do not route hose over top of rear panel.
• Ensure all hose connecons are ghtened using two wrenches. Do not use Teon tape or pipe dope on
any hose connecon.
• Ensure the hose does not contact any high temperature surfaces or it may melt and leak causing a re.
• Leak test all the connecons using a soap and water soluon as per the leak tesng instrucons found in
the manual.
• The outdoor cooking gas appliance and its individual shuto valve must be disconnected from the gas sup-
ply piping system during any pressure tesng of that system at test pressures in excess of 0.5 psi (3.5 kPa).
• The outdoor cooking gas appliance must be isolated from the gas supply piping system by closing its indi-
vidual manual shuto valve during any pressure tesng of the gas supply piping system at test pressures
equal to or less than 1/2 psi (3.5 kPa).
: This must be done before inial use, annually, and whenever any gas components are replaced
or serviced. Do not smoke while performing this test, and remove all sources of ignion. See Leak Tesng
Diagram for areas to check. Turn all burner controls to the o posion. Turn gas supply valve on.
Brush a half-and-half soluon of liquid soap and water onto all joints and connecons of the regulator, hose,
manifolds and valves.
Bubbles will indicate a gas leak. Either ghten the loose joint or have the part replaced with one recommend-
ed by the Napoleon Customer Care department and have the grill inspected by a cered gas installer.
If the leak cannot be stopped, immediately shut o the gas supply, disconnect it, and have the grill inspected
by a cered gas installer or dealer. Do not use the grill unl the leak has been corrected.
6
www.napoleongrills.com
1. Open grill lid. 1. Open grill lid. 1. Open grill lid. 1. Open burner cover.
2. Turn le burner control to
high posion.
2. Remove warming rack. 2. Turn infrared burner con-
trol to high posion.
2. Turn side burner control to
high posion.
3. Press and hold igniter buon
unl burner lights, or light by
match.
3. Turn rear burner control
to high posion.
3. Press and hold igniter
buon unl burner lights, or
light by match.
3. Press and hold igniter but-
ton unl burner lights, or light
by match.
4. If ignion is not immediate,
turn burner control o. Wait 5
minutes.
Repeat.
4. Press and hold igniter
buon unl burner lights, or
light by match.
4. If ignion is not immedi-
ate, turn burner control o.
Wait 5 minutes.
Repeat.
4. If ignion is not immediate,
turn burner control o. Wait
5 minutes. Repeat.
5. With le tube burner operat-
ing on high, turn the center
and/or right tube burner to
high.
5. If ignion is not immedi-
ate, turn burner control o.
Wait 5 minutes.
Repeat.
7
www.napoleongrills.com
: When lit for the rst me, the gas grill emits a slight odor. This is a normal temporary condion
caused by the “burn-in” of internal paints and lubricants used in the manufacturing process and does not occur
again. Simply run the main burners on high for approximately one-half hour.
: When searing foods, we recommend preheang the grill by operang all main burners
in the high posion with the lid closed for approximately 10 minutes. Food cooked for short periods of me
(sh, vegetables) can be grilled with the lid open. Cooking with the lid closed will ensure higher, more even
temperatures that can reduce cooking me and cook meat more evenly. Food that has a cooking me longer
than 30 minutes, such as roasts, can be cooked indirectly (with the burner lit opposite to the food placement).
When cooking very lean meats, such as chicken breasts or lean pork, the grids can be oiled before pre-heang
to reduce scking. Cooking meat with a high degree of fat content can create are-ups. Either trim the fat or
reduce temperatures to inhibit this. Should a are-up occur, move food away from the ames and reduce the
heat. Leave the lid open. See Your All Season Grill cookbook by Napoleon for more detailed instrucons.
: Remove the warming rack prior to use. Cooking grids should also be removed
if they interfere with the rosserie. The rear burner is designed to be used in conjuncon with the rosserie
kit (included with most rear burner units) available from your dealer. See the rosserie kit assembly instruc-
ons.
To use the counterbalance - remove the rosserie motor from the gas grill. Place the spit with meat being
cooked across the hangers inside the grill. The meat will naturally hang with the heavy side down. Tighten
the counterbalance arm and weight so the arm is facing up. Slide the counterweight in or out to balance the
load and ghten in place. Re-install the motor and begin cooking. Place a metal dish underneath the meat to
collect drippings for basng and naturally delicious gravy. Basng liquid may be added as required. To seal in
juices, rst operate rear burner on high unl brown, then reduce the heat to thoroughly cook foods. Keep the
lid closed for best results. Your roasts and fowl will brown perfectly on the outside and stay moist and tender
on the inside. For example, a 3 pound chicken on the rosserie will be done in approximately 1½ hours on
medium to high. See ‘Your all Season Grill’ cookbook by Napoleon for more detailed instrucons.
: Place food to be cooked on the grill directly over the heat. This method is generally used for
searing or for foods that do not require prolonged cooking mes such as hamburgers, steaks, chicken pieces,
or vegetables. The food is rst seared to trap-in the juices and avor, and then the temperature is lowered to
nish cooking the food to your preference.
: With one or more burners operang, place food to be cooked on the grill over a burner that
is not operang. The heat circulates around the food, cooking slowly and evenly. Cooking with this method is
much the same as cooking in your oven and is generally used for larger cuts of meats such as roasts, chickens
or turkeys, but can also be used for cooking foods that are prone to are-ups or for smoking foods. Lower tem-
peratures and slower cooking mes result in tender foods.
: The side burner can be used like any stove top burner, for gravies, soups etc.
For best performance, the gas grill should be located with the side burner protected from the wind.
: Follow the Infrared Burner Ignion procedures and operate on high for 5 minutes
with the lid closed or unl the ceramic burners glow red. Place food on the grill(s) and cook according to mes
listed in the Infrared Grilling Chart. Depending upon your taste, connue cooking over infrared burners on
high, medium, or low, turning food frequently, or place food over unlit burners, close lid, and allow the oven
temperature to slowly nish cooking your food.
8
www.napoleongrills.com
Most people don’t realize that the heat source we are most familiar with, our sun, warms the earth using mainly
infrared energy. This is a form of electro-magnec energy with a wavelength just greater than the red end of the
visible light spectrum but less than a radio wave. This energy was discovered in 1800 by Sir William Herschel who
dispersed sunlight into its component colors using a prism. He showed that most of the heat in the beam fell into the
spectral region just beyond the red end of the spectrum, where no visible light existed. Most materials readily ab-
sorb infrared energy in a wide range of wavelengths, causing an increase in its temperature. The same phenomenon
causes us to feel warmth when we are exposed to sunlight. The infrared rays from the sun travel through the vacuum
of space, through the atmosphere, and penetrate our skin. This causes increased molecular acvity in the skin, which
creates internal fricon and generates heat, allowing us to feel warmth.
Foods cooked over infrared heat sources are heated by the same principle. Charcoal grilling is our most familiar
choice for infrared cooking. The glowing briquees emit infrared energy to the food being cooked with very lile
drying eect. Any juices or oils that escape from the food drip onto the charcoal and vaporize into smoke giving the
food its delicious grilled taste. The Napoleon infrared burner cooks in the same way. In each burner, 10,000 ports
– each with its own ny ame – cause the surface of the ceramic le to glow red. This glow emits the same type of
infrared heat to the food as charcoal, without its hassle or mess. Infrared burners also provide a more consistently
heated area that is far easier to regulate than a charcoal re. For instant searing, the burners can be set to high, yet
they can also be turned down for slower cooking. We all know how dicult that is on a charcoal re. Tradional gas
burners heat the food in a dierent way. The air surrounding the burner is heated by the combuson process and
then rises to the food being cooked. This generates lower grill temperatures that are ideal for more delicate cuisine
such as seafood or vegetables, whereas Napoleon’s infrared burners produce searing heat for juicier, taser steaks,
hamburgers and other meats. For cooking mes and ps refer to the Infrared Grilling Chart.
Infrared Grilling Chart
Food Control Setting Cooking Time Helpful Suggestions
Steak
1 in. thick
High seng 2 min. each side.
High seng 2 min. each side
then medium seng.
High seng 2 min. each side
then medium seng.
4 min. – Rare
6 min. – Medium
8 min. – Well done
When selecng meat for grilling,
ask for marbled fat distribuon.
The fat acts as a natural tenderizer
while cooking and keeps it moist
and juicy.
Hamburger
1/2 in. thick
High seng 2 min. each side.
High seng 2 1/2 min. each side.
High seng 3 min. each side.
4 min. – Rare
5 min. – Medium
6 min. – Well done
Preparing hamburgers to order
is made easier by varying the
thickness of your paes. To add an
exoc taste to your meat, try adding
hickory-avored woodchips to
Napoleon’s woodchip smoker.
Chicken pieces High seng 2 min. each side.
then medium-low to low seng.
20-25 min.
The joint connecng the thigh and
the leg from the skinless side should
be sliced 3/4 of the way though for
the meat to lay aer on the grill.
This helps it to cook faster and more
evenly. To add a trademark taste to
your cooking, try adding mesquite-
avoured woodchips to your
Napoleon woodchip smoker.
Pork chops Medium 6 min. per side
Trim o the excess fat before
grilling. Choose thicker chops for
more tender results.
Spare ribs High seng for 5 minutes
low to nish
20 min. per side
turn oen
Choose ribs that are lean and
meaty. Grill unl meat easily pulls
away from the bone.
Lamb chops High seng for 5 minutes
medium to nish
15 min. per side
Trim o the excess fat before
grilling. Choose extra thick chops for
more tender results.
Hot dogs Medium - Low 4-6 min.
Select the larger size wieners. Slit
the skin lengthwise before grilling.
9
www.napoleongrills.com
: Stainless steel tends to oxidize or stain in the presence of chlorides and suldes, parcularly in coastal
areas and other harsh environments, such as the warm, highly humid atmosphere around pools and hot tubs.
These stains could be perceived as rust, but can be easily removed or prevented. To provide stain prevenon
and removal, wash all stainless steel surfaces every 3-4 weeks or as oen as required with fresh water and/or
stainless steel cleaner.
: The grids and warming rack are best cleaned with a brass wire brush during the pre-
heang period. Steel wool can be used for stubborn stains. It is normal that stainless grids (if equipped) will
discolor permanently from regular usage due to the high temperature of the cooking surface.
: The control panel text is printed directly on the stainless steel and with proper maintenance will
remain dark and legible. To clean the panel, use only warm soapy water or Connental brand stainless steel
cleaner available from your Napoleon dealer. Never apply abrasive cleaners on any stainless surfaces, espe-
cially the printed poron of the control panel or the prinng will gradually rub o.
: Remove the cooking grids. Use a brass wire brush to clean loose debris from
the casng sides and underneath the lid. Scrape the sear plates with a puy knife or scraper, and use a wire
brush to remove the ash. Remove the sear plates and brush debris from the burners with the brass wire brush.
Sweep all debris from inside the gas grill into the drip pan.
: Accumulated grease is a re hazard. Clean the drip pan frequently (every 4 – 5 uses or as oen as re-
quired) to avoid grease buildup. Grease and excess drippings pass through to the drip pan, located beneath the
gas grill and accumulate in the disposable grease tray below the drip pan. To access the disposable grease tray
or to clean the drip pan, slide the drip pan free of the grill. Never line the drip pan with aluminum foil, sand or
any other material as this could prevent the grease from owing properly. The pan should be scraped out with
a puy knife or scraper. Replace the disposable grease tray every 2 – 4 weeks, depending on gas grill usage.
For supplies, see your Napoleon Gas Grill dealer.
Do not use abrasive cleaners or steel wool on any painted, porcelain or stain-
less steel parts of your Napoleon Grill. Doing so will scratch the nish. Exterior grill surfaces should be cleaned
with warm soapy water while the metal is sll warm to the touch. To clean stainless surfaces, use a stainless
steel or a non-abrasive cleaner. Always wipe in the direcon of the grain. Over me, stainless steel parts
discolor when heated, usually to a golden or brown hue. This discoloraon is normal and does not aect the
performance of the grill. Porcelain enamel components must be handled with addional care. The baked-on
enamel nish is glass-like, and will chip if struck. Touch-up enamel is available from your Napoleon Grill dealer.
: Because of the high intensity of the infrared burner, most drippings and food parcles that
fall onto the burner surface are immediately incinerated. However, some debris and residue may remain. To
remove this residue aer cooking, turn the grill on high with lid closed for 5-10 minutes. Do not clean the ce-
ramic le with a wire brush. If debris is collecng on your burner, simply light the burner and operate on high
for 5 minutes with the lid open, allowing debris to burn o.
10
www.napoleongrills.com
: (This must be done by a qualied gas installer.) The air shuer is factory set and
should not need adjusng under normal condions. Under extreme eld condions, adjustments might be
required. When the air shuer is adjusted correctly the ames will be dark blue, pped with light blue and
occasionally yellow.
• With too lile air ow to the burner, the ames are lazy yellow and can produce soot.
• With too much air ow, the ames li erracally and can cause dicules when lighng.
:
1. Remove cooking grids and sear plates and leave lid open. You may have to open the door or remove the
top drawer (if equipped) to access the air-shuer screw located at the mouth of the burner. The back cover
must be removed for rear tube burner air shuer adjustment.
2. Loosen air-shuer lock screw and open or close air shuer as required. The normal opening sengs are:
Main Tube Burner Propane 1/4” (6mm) Rear Tube Burner Propane Full Open
Natural 1/8” (3mm) Natural 3/8” (10mm)
*Infra-Red burners have no air adjustment.
3. Light the burners and set to high. Visually inspect burner ames. When the shuers are set correctly, turn
burners o, ghten locking screws, and replace removed parts. Ensure that the insect screens are installed.
: The burner is made from heavy wall 304 stainless steel, but extreme heat and a corrosive environment
can cause surface corrosion to occur. This can be removed with a brass wire brush.
Spiders and insects are aracted to the smell of propane and natural gas. The burner is equipped with an in-
sect screen on the air shuer, which reduces the likelihood of insects building nests inside the burner but does
not enrely eliminate the problem. A nest or web can cause the burner to burn with a so yellow or orange
ame or cause a re (ashback) at the air shuer underneath the control panel. To clean the inside of the
burner, it must be removed from the gas grill: Remove the screw (s) that aaches the burner to the back wall.
Slide the burner back and up wards to remove. Cleaning: Use a exible venturi tube brush to clean the inside
of the burner. Shake any loose debris from the burner through the gas inlet. Check the burner ports and valve
orices for blockages. Burner ports can close over me due to cooking debris and corrosion, use an opened pa-
perclip or the supplied port maintenance bit to clean them. Drill out blocked ports using this drill bit in a small
cordless drill. The ports are easier to clean if the burner is removed from the grill, but it can also be done with
Light Blue
Yellow Tipping
Dark Blue
Burner
Burner Port
Approximately
1/2” (13mm)
11
www.napoleongrills.com
: Clean casngs periodically with warm soapy water. Aluminum will not rust, but high
temperatures and weathering can cause oxidaon to occur on aluminum surfaces. This appears as white spots
on the casngs. To renish these areas, clean rst and sand lightly with ne sandpaper. Wipe the surface to
remove any residue and paint with high temperature barbecue paint. Protect surrounding areas from over-
spray. Follow the manufacture’s direcons for curing.
:The infrared burners of your grill are designed to provide a long service life,
though care must taken to prevent cracking of their ceramic surfaces. Fractures will cause the burners to
malfuncon. The following provides a few of the causes of cracks and the steps you can take to avoid them.
Damage caused by failure to follow these steps is not covered by your grill warranty.
1. Impact with hard objects - Never allow hard objects to strike the ceramic. Take care when inserng or re-
moving cooking grates and accessories into or from the grill.
2. Contact with water or other liquids - Cold liquids contacng the hot ceramic surfaces can cause them to
break. Never throw water into the grill to douse a ame. If the ceramic or interior of a burner becomes wet
while not in use, later operaon of the burner can create steam, which can produce sucient pressure to crack
the ceramic. Repeated soaking of the ceramic can also cause it to swell and expand. This expansion causes
undue pressure on the ceramic that can cause it to crack and crumble.
i) Never throw water into the grill to control are-ups.
ii) Do not aempt to operate the infrared burners in open air while raining.
iii) If you nd standing water in your grill (because of exposure to rainfall, sprinklers, etc.), inspect the
ceramic for evidence of possible watersoaking. If the ceramic appears to be wet, remove the burner from the
grill. Turn it upside down to drain the excess water and bring indoors to dry thoroughly.
3. Impaired venlaon of hot air from the grill - For the burners to funcon properly, hot air must have a way
to escape the grill. If the hot air is not allowed to escape, the burners can become deprived of oxygen causing
them to back-ash. If this occurs repeatedly, the ceramic could crack. Never cover more than 75% of the cook-
ing surface with solid metal (i.e., griddle or large pan).
4. Incorrect cleaning - Do not clean the ceramic le with a wire brush. If debris is collecng on your burner,
light the burner and operate on high for 5 minutes with the lid open, allowing debris to burn o.
the burner installed. Do not ex the drill bit when drilling the ports, as this will cause the drill bit to break. This
drill is for burner ports only, not for the brass orices (jets) which regulate the ow into the burner. Take care
not to enlarge the holes. Ensure the insect screen is clean, ght, and free of any lint or other debris.
: Reverse the procedure to reinstall the burner. Check that the valve enters the burner when
installing. Replace sear plate mount and ghten screws to complete reinstallaon.
REPLACEMENT SCREEN N565-0002
12
www.napoleongrills.com
Low heat / Low ame
when valve turned to
high.
For propane - improper lighng
procedure.
For natural gas - undersized supply line.
For both gases - improper preheang.
Ensure lighng procedure is followed carefully.
All gas grill valves must be in the o posion
when the tank valve is turned on. Turn tank on
slowly to allow pressure to equalize. See lighng
instrucons.
Pipe must be sized according to installaon code.
Preheat grill with both main burners on high for 10
to 15 minutes.
Excessive are-ups/
uneven heat.
Sear plates installed incorrectly.
Improper preheang.
Excessive grease and ash build on sear
plates and in drip pan.
Ensure sear plates are installed with the holes
towards the front and the slots on the boom. See
assembly instrucons.
Preheat grill with both main burners on high for 10
to 15 minutes.
Clean sear plates and drip pan regularly. Do not
line pan with aluminum foil. Refer to cleaning
instrucons.
Burners burn with
yellow ame,
accompanied by the
smell of gas.
Possible spider web or other debris, or
improper air shuer adjustment.
Thoroughly clean burner by removing. See general
maintenance instrucons. Open air shuer
slightly according to combuson air adjustment
instrucons. (This must be done by a qualied gas
installer.)
Flames li away from
burner, accompanied
by the smell of gas, and
possibly dicules in
lighng.
Improper air shuer adjustment. Close air shuer slightly according to combuson
air adjustment instrucons. (This must be done by
a qualied gas installer.)
Burner will not light with
the igniter, but will light
with a match.
Dead baery / or installed incorrectly.
Loose electrode wire or switch terminal
wires.
Wrong replacement igniter.
Improper gap at electrode p.
Liing ames on burner.
Replace with heavy duty baery.
Check that electrode wire is rmly pushed onto
the terminal on the back of the igniter. Check that
the lead wires from the module to the ignion
switch (if equipped) are rmly pushed onto their
respecve terminals.
One spark systems must use a one spark igniter.
Ensure that the collector box is ght and the gap
between the electrode end and the collector box is
between 1/8” - 3/16” (3mm-5mm). The gap can be
adjusted by bending the box in or out.
Close air shuer slightly - see previous problem.
Humming regulator. Normal occurrence on hot days. This is not a defect. It is caused by internal
vibraons in the regulator and does not aect the
performance or safety of the gas grill. Humming
regulators will not be replaced.
Burners will not cross
light each other.
Plugged ports along back of burner. Clean burner ports. See burner maintenance
instrucons.
“Paint” appears to be
peeling inside lid or
hood.
Grease build-up on inside surfaces. This is not a defect. The nish on the lid and hood
is porcelain, and will not peel. The peeling is
caused by hardened grease, which dries into paint-
like shards, that ake o. Regular cleaning will
prevent this. See cleaning instrucons.
13
www.napoleongrills.com
Burner output on “high”
seng is too low.
(Rumbling noise and
uering blue ame at
burner surface.)
Lack of gas.
Supply hose is pinched.
Dirty or clogged orice.
Spider webs or other maer in venturi
tube.
Propane regulator in “low ow” state.
Check gas level in propane cylinder.
Reposion supply hose as necessary.
Clean burner orice.
Clean out venturi tube.
Ensure lighng procedure is followed carefully.
All gas grill valves must be in the o posion
when the tank valve is turned on. Turn tank on
slowly to allow pressure to equalize. See lighng
instrucons.
Infrared burner (if
equipped) ashes back
(during operaon the
burner abruptly makes
a loud “whoosh” sound,
followed by a connuous
blow-torch type sound
and grows dim.)
Ceramic les overloaded with grease
drippings and build-up. Ports are
clogged.
Burner overheated due to inadequate
venlaon (too much grill surface
covered by griddle or pan.)
Cracked ceramic le.
Leaking gasket surrounding the ceramic
le, or a weld failure in the burner
housing.
Turn burner o and allow to cool for at least two
minutes. Relight burner and burn on high for at
least ve minutes or unl the ceramic les are
evenly glowing red.
Ensure that no more than 75% of the grill surface
is covered by objects or accessories. Turn burner
o and allow to cool for at least two minutes, then
relight.
Allow burner to cool and inspect very closely
for cracks. If any cracks are found, contact
your authorized Napoleon dealer to order a
replacement burner assembly.
Contact your authorized Napoleon dealer for
instrucons on ordering a replacement burner
assembly.
Pilot will not light.
(if equipped)
Lack of gas.
Obstrucon in pilot orice.
Electrode wire loose or o.
Dirty pilot electrode.
Pilot is actually lit.
Aer turning pilot knob to high, wait approximately
20-30 seconds for air to purge the gas supply line
while pressing igniter. Fill propane cylinder. During
inial set-up or aer tank has been relled, it is
best to light one of the tube burners before lighng
the pilot burner. This enables the gas to reach the
valves on the manifold more quickly.
Clean pilot orice.
Replace lead wire.
Clean pilot electrode.
The pilot ame, especially on natural gas units is
very dicult to see. Place your hand 1 in. (2.5 cm)
above grill surface over the pilot burner to feel for
heat.
29
www.napoleongrills.com
Geng Started
1. Remove all cart panels, hardware, and grill head from carton. Raise lid and remove any components
packed inside. Use the parts list to ensure all necessary parts are included.
2. Do not destroy packaging unl the grill has been fully assembled and operates to your sasfacon.
3. Assemble the grill where it is to be used, lay down cardboard or a towel to protect parts from being lost or
damaged while assembling.
4. Most stainless steel parts are supplied with a protecve plasc coang that must be removed prior to us-
ing grill.
5. Follow all instrucons in the order that they are laid out in this manual.
6. Two people are required to li the grill head onto the assembled cart.
If you have any quesons about assembly or grill operaon, or if there are damaged or missing parts please
call our Customer Care Department at 1-866-820-8686 between 9 AM and 5 PM (Eastern Standard Time).
Flat and Philips
screwdrivers
Pliers3/8 (10mm)
Wrench,
ratchet or driver
Hammer
Pour Commencer
1. Rerez tous les panneaux, le matériel et le gril du carton d’emballage. Soulevez le couvercle et enlevez les
composants qui se trouvent à l’intérieur. Servez-vous de la liste de pièces pour vous assurer que toutes les
pièces nécessaires sont incluses.
2. Ne détruisez pas l’emballage jusqu’à ce que le gril ait été complètement assemblé et qu’il fonconne à
votre sasfacon.
3. Assemblez le gril là où il sera ulisé et posez un carton ou une serviee an d’éviter de perdre ou
d’endommager les pièces lors de l’assemblage.
4. La plupart des pièces en acier inoxydable possèdent un revêtement de plasque protecteur qui doit être
enlevé avant d’uliser le gril.
5. Suivez toutes les instrucons dans l’ordre donné dans ce manuel.
6. Deux personnes sont requises pour soulever la cuve de gril et la placer sur le chariot assemblé.
Si vous avez des quesons à propos de l’assemblage ou du fonconnement du gril, ou si des pièces sont man-
quantes ou endommagées, veuillez appeler notre département du Service aux Consommateurs au 1-866-820-
8686 entre 9 h et 17 h (heure normale de l’Est).
Pinces
Tournevis ou clé,
cliquet de 3/8
(10mm)
Tournevis plat et
phillips
Marteau
OUTILS REQUIS POUR L’ASSEMBLAGE (ouls non inclus)
TOOLS REQUIRED FOR ASSEMBLY (tools not included)
30
www.napoleongrills.com
2 X N570-0026 (#14 x 1/2”)
4 X N570-0026 (#14 X1/2”)
3/8”(10mm)
3/8”(10mm)
31
www.napoleongrills.com
2 x N570-0026 (#14 x 1/2”)
3/8”(10mm)
4 x N570-0026 (#14 x 1/2”)
3/8”(10mm)
32
www.napoleongrills.com
4 x N570-0026 (#14 x 1/2”)
3/8”(10mm)
33
www.napoleongrills.com
3/8”(10mm)
2 x N570-0026 (#14 x 1/2”)
34
www.napoleongrills.com
4 x N735-0002 (1/4”)
2 x N570-0026 (#14 x 1/2”)
3/8”(10mm)
4 x N570-0029 (1/4-20 X 3/8”)
35
www.napoleongrills.com
10 x N570-0076 (#8 X1/2”)
4 x N570-0026 (#14 X1/2”)
3/8”(10mm)
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
NAPOLEON PT600RBI Le manuel du propriétaire
- Catégorie
- Barbecues
- Taper
- Le manuel du propriétaire
dans d''autres langues
- English: NAPOLEON PT600RBI Owner's manual
Documents connexes
-
NAPOLEON PT450RBI Le manuel du propriétaire
-
-
-
-
Napoleon Grills P405 PEDESTAL Manuel utilisateur
-
-
Napoleon Grills N415-0201 Manuel utilisateur
-
-
-
