Jupiter Bike Defiant Manuel utilisateur

USER MANUAL

Folding Electric Bike | Vélo Pliant Electric | Bici Eléctrica Plegable

1

Structural Diagram ...................................................... 2

Specications ................................................................. 3

Installing the Front Wheel ...................................... 4

Installing the Handlebars ....................................... 5

Seat Post Installation ................................................. 6

Pedals Installation ....................................................... 6

Charging the Battery ................................................. 7

Fender Mudguard Installation ............................. 7

Removing the Battery ............................................... 8

Folding the Pedals ...................................................... 9

Turning On Your Bike ............................................... 10

The LCD Display ......................................................... 10

Precautions When Riding ..................................... 11

Warnings ......................................................................... 12

Warranty .......................................................................... 13

Returns & Exchanges .............................................. 13

TABLE OF

CONTENTS

2

STRUCTURAL DIAGRAM

NOTE:

Manual illustrations are for demonstration purposes only. Illustrations may not reﬂect exact

appearance of actual product. *Speciﬁcations subject to change without notice.*

*Mileage is subjected to weight, road conditions, temperature,

wind speed, riding habits, etc. The bike was tested on speed 1

in conditions, which consisted of: 143 lb Load, 77°F temperature,

riding on ﬂat road, wind less than .5 mph and with full charge.

*Please use the original charger that was provided with purchase.

*Warranty becomes invalid in the instance of any unauthorized

bike modiﬁcation.

Handle Brake

Stem

Latch Lock

Stem Latch

Headlight

Front Fork

Disc Break

Chainwheel

Bike Frame Latch

Seat Post

Seat Post Clamp

Motor Pedal

Bike Frame

Saddle

3

PACKING CONTENTS:

Deﬁant Electric Bike

Saddle & Seat Tube

User Manual

Charger

In Frame Battery

2 Keys for Battery Lock

Front & Rear Mudguard

Multi-Purpose Bike Tool

SPECIFICATIONS

MOTOR & BATTERY

Motor Wattage: 48V / 750w

Charging Time: 4-6 hours

Waterproof Rating: IP54

Battery Capacity: 48V / 10.4Ah

Battery Type: Lithium Ion

Charging Current 2A max

METER:

Display: LCD Display

Remaining Power: Yes

Speed: Yes

Total Mileage: Yes

Speed Mode: 5 Speed Levels

COMPOSITION

Frame: Aluminum Alloy Unibody Frame

Brake Type: Front & Rear Disc

Production dimensions:

Folded: H = 28”, W = 22”, L = 38”

Unfolded: H = 48”, W = 22.5”, L = 65”

Seat Height (from ground) 34” - 41” (adjustable)

Net Weight (with battery) 55 lbs

Wheel Base: 45 Inches

Tire Size: 20” x 4”

Tire Pressure: 5 - 35 psi

4

INSTALLING THE FRONT WHEEL

Remove parts from box and locate

the front wheel and front wheel

axle.

Unscrew the thumb screw on the

axle, place the axle in the front

wheel, then loosely re-screw it.

Place the front fork on to the axle.

Make sure the Axle Latch is open.

Hand tighten the thumb screw,

then close the Axle Latch. Test and

make sure the wheel does not

wobble.

5

INSTALLING THE HANDLEBARS

Close the latch and reattach the clamp. Tighten the thumbscrew then

press the clamp down to lock.

Center the handlebar in the open

latch and rotate to the desired

position.

Lift the clamp on the top of the

stem, unscrew the thumb screw

and remove the clamp. Open the

latch.

Raise the handlebar stem, then

starting with the latch all the way

down, lift the latch until it locks.

Make sure the handlebar stem

is secured in the upright position

before moving on.

6

SEAT POST INSTALLATION

Unlatch and loosen seat

clamp. Put seat post in

frame and adjust to desired

height. Retighten and re-

latch clamp.

PEDALS INSTALLATION

The right pedal is reverse

threaded so twist in the

opposite direction. Look

for an R engraved on the

threaded end. It should

hand twist easily on the

pedal arm. If it doesn’t,

unscrew and try again.

Use a 15mm wrench for

the last 1 or 2 turns. Repeat

with the left pedal on the

other side.

7

The Deﬁant battery can be charged inside or outside the bike frame.

The red led light on the charger will turn green when fully charged.

CHARGING THE BATTERY

1. Build the rear and front fenders

as shown. There will be extra /

unused parts.

2. Unscrew the headlight.

3. Position the front fender bracket

so the slots align with the bolt hole

FENDER MUDGUARD INSTALL

from the headlight.

4. Reattach the headlight and

front fender using the original

headlight bolt.

5. Attach the rear fender to the

seat pole.

8

Insert the key into the hole on

the bottom of the frame and

turn it to the left. Then pull

out the key. This unlocks the

battery.

Unlatch the Bike Frame Latch

and fold the bike in half. The

frame has a metal stand under

the Chainring that the bike will

balance on when folded. Then

pull the battery out.

REMOVING THE BATTERY

FOLDING THE PEDALS

pedals can fold down to obtain

its minimum size. To fold, ﬁrmly

press the pedal in towards the

arm, then fold down.

9

THE LCD DISPLAY

TURNING ON YOUR BIKE

After charging the bike,

press the power button

on the LCD display to

power up your bike.

Check tire pressure,

then Congratulations!

You are ready for

your ﬁrst ride!

Don’t Forget! Practice

common sense &

safety measures when

riding your bike.

SpeedPower / Headlight

Pedal Assist

Battery

Odo / Trip

Power Current

Up and Down buttons change Pedal Assist level. Hold Power button to

turn off bike. Hold Up and Down buttons for 10s to enter settings.

10

PRECAUTIONS WHEN RIDING

Do not ride in snowy

or slippery road

conditions.

Always ride with

both hands on the

handlebar.

Never ride down stairs,

escalators or elevators.

• Wear the appropriate protection gear such as helmets, knee pads, and elbow pads to help

prevent injury.

• Inspect the bike, brakes, & battery before each ride to ensure all is in working order.

• Do not ride on slopes over 15°.

• If you must ride in the rain or snow, please ride at lower speeds and keep a safe stopping

distance from objects and vehicles in front of you.

• Children under the age of 16 are not advised to ride the bike.

• Avoid sudden starts and stops.

• Do not lean forwards or backwards while riding, and maintain a safe speed at all times.

• If the battery runs low, keep a low constant speed & charge the battery as soon as possible.

• Do not store your bike in the trunk of a car in hot weather.

• Have a full understanding of local trafﬁc rules and regulations before you ride.

• Be aware of your surroundings at all times, and be sure to always ride in safe conditions.

• Keep a comfortable distance from other riders.

• Use caution when riding in environments with low visibility, lower your speed or stroll your bike

if needed.

• Do not ride the bike backwards or do any actions that may endanger yourself and others

while riding.

• Do not lend your bike to others without letting them become familiar to this manual ﬁrst.

• Do not ride while ill or under the inﬂuence of drugs or alcohol.

• Accelerate slowly when riding. Sudden acceleration may throw you out-of-balance and could

cause falls or injury.

11

• For your safety, please read the user manual

carefully. Make sure the owner and operator

understand and accept all the safety instructions.

• Ride at your own risk and use common sense. You

will be responsible for any loss or damage caused

by improper use.

• The elderly, pregnant women, children, and those

with heart conditions should not use this product.

• Do not exceed the weight limit of 300 pounds. Only

1 rider at a time.

• Inspect each part of the product prior to each use

to ensure that it has been correctly maintained

and is properly functioning. Riding with improperly

adjusted brakes is dangerous and may result in

serious injury or death.

• Only operate in safe, suitable locations. Do not

ride on roads with obstacles, such as litter, small

stones, etc. Avoid riding on steep slopes or in

narrow areas. Avoid riding in the rain or on smooth

slippery surfaces such as ice or snow. Avoid riding

near ﬂammable gas, steam, liquid or dust that

could cause a ﬁre.

• If you have had any head, neck or back ailments,

or prior surgeries to those areas, Do Not ride this

product.

• Do not ride without proper training, at high speeds,

on uneven terrain or on slopes.

• Be sure all safety labels are in place and

understood prior to riding.

• Do not use near motor vehicles.

• Do not ride after taking prescription medications

or drinking.

• Do not answer your phone, carry items or engage

in any other activities while riding.

• Always wear appropriate safety gear, including

shoes and a helmet. We encourage you to use

lighting, reﬂectors and signal ﬂags.

• Always comply with laws, regulations and

ordinances, including local trafﬁc laws.

• Always give way to pedestrians, and be alert to

your surroundings, both directly in front of you and

in the distance.

• When riding with others, always maintain a safe

distance to avoid the possibility of a collision.

• Be sure to maintain your balance when turning,

and don’t make sharp turns.

• Applying the brakes too hard, or suddenly, can

cause a wheel to lock which may cause you to lose

control and fall which may result in injury or death.

• Only ride the product with adequate daylight for

visibility.

• Do not lift the product from the ground while it is

on and the wheels are in motion. This may result

in free spinning wheels which may cause injury to

yourself or others.

• Do not jump on or off the product or jump while

using it, or perform stunts.

• When not in use, store your bike in a cool, dry area

away from sunlight and water.

• To clean your bike, use a soft damp cloth to wipe

clean, and dry with a dry cloth. To protect internal

wiring and electric components, do not soak

or rinse your bike with water, and do not clean

your bike with corrosive or ﬂammable chemical

solvents, like alcohol, gasoline, parafﬁn or acetone.

• Do not attempt to disassemble, modify, repair or

replace the unit or any components of the unit

without instruction from Customer Support. This

will void any warranty and can lead to malfunctions

that may cause injury.

CALIFORNIA PROPOSITION 65

WARNING: this product can expose you to a chemical

such as Cadmium that is known to the State of

California to cause cancer or birth defects or other

reproductive harm. For more information go to:

www.p65warnings.ca.gov/product

TROUBLESHOOTING

For troubleshooting or operational issues, please

contact Jupiter Tech at 813-609-BIKE (2456) or

e-mail [email protected]

SAFETY WARNINGS

12

JUPITER BIKE DEFIANT – LIMITED 1 YEAR WARRANTY

The Jupiter Bike Deﬁant and accessories are manufactured to high quality standards.

The Jupiter Bike Deﬁant is warranted to the original purchaser for one full year from

the original purchase date against defective materials or workmanship. This warranty

applies to replacement parts only and speciﬁcally excludes the tire tread, battery, and

wear parts. This warranty becomes void if the original purchaser transfers the product

to another individual.

If the Jupiter Bike Deﬁant suffers damage due to customer modiﬁcations and/or is used

for any application other than for which it was designated, this warranty is void. This

warranty does not include damage due to: (A) neglect, (B) accident, (C) unreasonable

use, (D) improper maintenance or (E) any other causes not attributed to defects in

material or workmanship. Any implied or otherwise explicit guarantees made through

the merchandiser of this product are not covered in this warranty coverage agreement

and are expressly disclaimed.

If you feel your Jupiter Bike Deﬁant is not operating properly and needs a replacement

part, contact Jupiter Tech at 813-609-BIKE (2453) or email [email protected] for

assistance.

IMPORTANT NOTE:

This machine was designed for certain applications only. Jupiter Tech strongly

recommends that this machine NOT be modiﬁed and/or used for any application other

than that for which it was designated. If you have questions relative to its application,

please contact us and we will advise as to its proper use. This warranty gives you

speciﬁc legal rights, and you may also have other rights which vary

from state to state.

RETURNS & EXCHANGES:

Please refer to our website JupiterBike.com for all product exchange information &

procedures.

Please keep the original packaging.

813-609-BIKE (2453)

[email protected]om

www.Jupiterbike.com

JUPITER TECH 5600 Airport Blvd. Suite C TAMPA, FL 33634

WARRANTY:

13

14

15

Schéma de la structure ........................................ 16

Caractéristiques techniques ............................... 17

Installation de la roue avant .............................. 18

Installation des guidons ........................................ 19

Installation de la tige de selle .......................... 20

Installation des pédales ....................................... 20

Chareger la batterie ................................................. 21

Installation du garde-boue Fender ................ 21

Retrait de la batterie ............................................... 22

Plier les pédales ........................................................ 22

Allumer votre vélo .................................................... 23

L’écran LCD ................................................................... 23

Précautions à prendre lors de la conduite 24

Avertissements ........................................................... 25

Garantie ........................................................................... 26

Retours ............................................................................ 26

TABLE DES

MATIÈRES

16

SCHÉMA DE LA STRUCTURE

REMARQUE :

Les illustrations de ce manuel ne sont données qu’à titre de démonstration. Les illustrations

peuvent ne pas reﬂéter l’apparence exacte du produit réel. Sous réserve de modiﬁcations

* Le kilométrage est soumis au poids, aux conditions routières, à

la température, à la vitesse du vent, aux habitudes de conduite,

etc. Le vélo a été testé

dans des conditions qui consistaient en: charge de 143 lb,

température de 77 ° F, conduite sur route plate, vent inférieur à

0,5 mph et avec pleine charge.

* Veuillez utiliser le chargeur d’origine fourni avec l’achat.

* La garantie devient invalide en cas de modiﬁcation non autorisée

Guidon Frein

Tige

Verrouillage du loquet

Loquet de tige

Phare

Fourche

Avant

Frein à disque

Roue à

Chaîne

Loquet de cadre

de vélo

Tige de

Pince de Tige

de Selle

Moteur Pédale

Cadre de Vélo

Selle

17

CONTENU

DE L’EMBALLAGE :

Deﬁant Vélo Électrique

Selle et tube de selle

Manuel de l’utilisateur

Chargeur

Dans le cadre de la batterie

2 Clés de verrouillage de la batterie

Garde-boue arrière

Outil de vélo polyvalent

CARACTÉRISTIQUES

MOTEUR & BATTERIE

Puissance du moteur : 48V / 750w

Temps de charge : 4-6 heures

Étanchéité à l’eau : IP54

Capacité de la batterie: 48V / 10.4Ah

Type de batterie : Lithium Ion

Courant de charge 2A maxi

MESURES :

Afﬁchage : Écran LCD

Puissance restante : Oui

Vitesse : Oui

Kilométrage total : Oui

Mode vitesse : 5 mode

COMPOSITION

Cadre : Cadre monobloc en magnésium

Type de frein : Disque avant et arrière

DIMENSIONS DU PRODUIT :

Plié : H = 28”, W = 22”, L = 38”

Déplié : H = 48”, W = 22.5”, L = 65”

Hauteur du siège (à partir du sol) 34” - 41” (réglable)

Poids net (avec batterie) 55 livres

Empattement : 45 pouces

Taille de pneus 26” X 2.35”

Pression des pneus : 5 - 35 psi

18

INSTALLATION DE LA ROUE AVANT

Retirez les pièces de la boîte et

localisez la roue avant et l’axe de

roue avant.

Dévissez la vis à oreilles sur l’axe,

placez l’axe dans la roue avant,

puis revissez-le sans serrer.

Placez la fourche avant sur

l’essieu. Assurez-vous que le

loquet de l’essieu est ouvert.

Serrez à la main la vis à oreilles,

puis fermez le loquet de l’essieu.

Testez et assurez-vous que la roue

ne vacille pas.

19

INSTALLATION DES GUIDONS

Fermez le loquet et rattachez la pince. Serrez la vis de serrage, puis

appuyez sur la pince pour verrouiller.

Centrez le guidon dans le loquet

ouvert et faites-le pivoter jusqu’à

la position souhaitée.

Soulevez la pince sur le dessus de

la tige, dévissez la vis à oreilles et

retirez la pince. Ouvrez le loquet.

Soulevez la potence du guidon,

puis en commençant par le loquet

jusqu’en bas, soulevez le loquet

jusqu’à ce qu’il se verrouille.

Assurez-vous que la potence

du guidon est ﬁxée en position

verticale avant de continuer.

La page est en cours de chargement...

Jupiter Bike Defiant Manuel utilisateur

Jupiter Bike Defiant Manuel utilisateur

dans d''autres langues

Documents connexes

Autres documents