Chauvet COLORado Solo Batten 4 Guide de référence

Catégorie
Projecteurs
Taper
Guide de référence

Ce manuel convient également à

Quick Reference Guide
English EN
Español ES
Français FR
Deutsch DE
Nederlands NL
1
EN
QUICK REFERENCE GUIDE
COLORado Solo Batten 4 QRG Rev. 2
About This Guide
The COLORado Solo Batten 4 Quick Reference Guide (QRG) has basic product information such as connection, mounting,
menu options, and DMX values. Download the User Manual from www.chauvetprofessional.com for more details.
Disclaimer
The information and specifications contained in this QRG are subject to change without notice.
LIMITED WARRANTY
FOR WARRANTY REGISTRATION AND COMPLETE TERMS AND CONDITIONS PLEASE VISIT OUR WEBSITE.
For Customers in the United States and Mexico: www.chauvetlighting.com/warranty-registration
.
For Customers in the United Kingdom, Republic of Ireland, Belgium, the Netherlands, Luxembourg, France, and
Germany: www.chauvetlighting.eu/warranty-registration
.
Chauvet warrants that this product shall be free from defects in material and workmanship under normal use, for the
period specified in, and subject to the exclusions and limitations set forth in the full limited warranty on our website. This
warranty extends only to the original purchaser of the product and is not transferable. To exercise rights under this
warranty, you must provide proof of purchase in the form of an original sales receipt from an authorized dealer that shows
the product name and date of purchase. THERE ARE NO OTHER EXPRESS OR IMPLIED WARRANTIES. This
warranty gives you specific legal rights. You may also have other rights that vary from state to state and country to
country. This warranty is valid only in the United States, United Kingdom, Republic of Ireland, Belgium, the Netherlands,
Luxembourg, France, Germany and Mexico. For warranty terms in other countries, please consult your local distributor.
Safety Notes
These Safety Notes include important information about installation, use, and maintenance.
DO NOT open this product. It contains no user-serviceable parts.
To eliminate unnecessary wear and improve its lifespan, during periods of non-use completely disconnect the
product from power via breaker or by unplugging it.
DO NOT look at the light source when the product is on.
CAUTION: This product’s housing may be hot when lights are operating. Mount this product in a location with
adequate ventilation, at least 20 in (50 cm) from adjacent surfaces.
DO NOT leave any flammable material within 50 cm of this product while operating or connected to power.
CAUTION: When transferring product from extreme temperature environments, (e.g., cold truck to warm humid
ballroom) condensation may form on the internal electronics of the product. To avoid causing a failure, allow
product to fully acclimate to the surrounding environment before connecting it to power.
Not for permanent outdoor installation in locations with extreme environmental conditions. This includes, but is not
limited to:
Exposure to a marine/saline environment (within 3 miles of a saltwater body of water).
Where the normal high or low temperatures of the location exceed the temperature ranges in this manual.
Locations that are prone to flooding or being buried in snow.
Other areas where the product will be subject to extreme radiation or caustic substances.
USE a safety cable when mounting this product overhead.
DO NOT submerge this product (IP65). Regular outdoor operation is fine.
DO NOT operate this product if the housing, lenses, or cables appear damaged.
DO NOT connect this product to a dimmer or rheostat.
ONLY connect this product to a grounded and protected circuit.
ONLY use the hanging/mounting bracket to carry this product.
In the event of a serious operating problem, stop using immediately.
The maximum ambient temperature is 113 °F (45 °C). Do not operate this product at higher temperatures.
The minimum startup temperature is -4°F (-20°C). Do not start the product at lower temperatures.
The minimum ambient temperature is -22°F (-30°C). Do not operate the product at lower temperatures.
FCC Compliance
This device complies with Part 15 Part B of the FCC rules. Operation is subject to the following two conditions:
1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s
authority to operate the equipment.
Contact
Outside the US, UK, Ireland, Benelux, France, Germany, or Mexico, contact your distributor to request support or return a
product. Refer to Contact Us
at the end of this QRG for contact information.
What is Included
COLORado Solo Batten 4 with glare shield
Seetronic Powerkon IP65 power cord
Wall wash filter
Omega brackets
Quick Reference Guide
EN
2
COLORado Solo Batten 4 QRG Rev. 2
QUICK REFERENCE GUIDE
AC Power
This product has an auto-ranging power supply that can work with an input voltage range of 100–240 VAC, 50/60 Hz.
Power Linking
You can link up to 14 COLORadoSoloBatten4 products at 120 V, 24 products at 208 V, or 26 products at 230 V. Never
exceed this number. Power linking cords can be purchased separately.
AC plug
Signal Connections
You can link the COLORado Solo Batten 4 to a controller or controller software using a DMX connection or an Ethernet
connection. If using other Art-Net™ or sACN-compatible products with the COLORado Solo Batten 4, you can control
each individually on a single network. See the User Manual for information about how to connect and configure the
product for these signals.
Control Personalities
The COLORado Solo Batten 4 uses DMX, Art-Net™, and sACN for its 18 control personalities, ranging from 3-channel to
56-channel in 1-cell modes and 4-cell modes:
DMX Connection
The COLORado Solo Batten 4 will work with a DMX controller using a 5-pin DMX data connection. A DMX Primer is
available from www.chauvetprofessional.com
.
Art-Net™ Connection
Art-Net™ is an Ethernet protocol that uses TCP/IP which transfers a large amount of DMX512 data using an Neutrik®
etherCON® RJ45 connection over a large network. An Art-Net™ protocol document is available from
www.chauvetprofessional.com
. Chauvet Professional recommends using unicast Art-Net™ for best results.
Art-Net™ designed by and copyright Artistic Licence Holdings Ltd.
sACN Connection
Also known as ANSI E1.31, Streaming-ACN is an Ethernet protocol that uses the layering and formatting of Architecture
for Control Networks to transport DMX512 data over IP or any other ACN compatible network.
Master/Slave Connection
The COLORado Solo Batten 4 uses the DMX data connection for its Master/Slave mode. See the User Manual for
information about how to connect and configure the product for master/slave operation.
RDM (Remote Device Management)
Remote Device Management, or RDM, is a standard for allowing DMX-enabled devices to communicate bi-directionally
along existing DMX cabling. Check the DMX controller’s User Manual or with the manufacturer as not all DMX controllers
have this capability. The COLORado Solo Batten 4 supports RDM protocol that allows feedback to make changes to
menu map options. Download the User Manual from www.chauvetprofessional.com
for more details.
Connection Wire (U.S.) Wire (Europe) Screw Color
AC Live Black Brown Yellow/Brass
AC Neutral White Blue Silver
AC Ground Green/Yellow Green/Yellow Green
To eliminate unnecessary wear and improve its lifespan, during periods of non-use completely
disconnect the product from power via breaker or by unplugging it.
When using this product in an outdoor IP65-type environment, be sure to use IP65 (or higher) rated
power cables and secure unused ports with attached IP65 covers.
Mode 1-Cell 4-Cell
RGB 3 12
RGB EXT 8 27
RGBA 4 16
RGBA EXT 9 31
RGBAW 5 20
RGBAW EXT 10 35
RGBAW Fine 10 40
RGBAW FULL 16 56
HSIC 9 29
!
3
EN
QUICK REFERENCE GUIDE
COLORado Solo Batten 4 QRG Rev. 2
Mounting
Before mounting this product, read the Safety Notes. Use at least two mounting points per product. Make sure the
mounting clamps are capable of supporting the weight of the product. For our Chauvet line of mounting clamps, go to
http://trusst.com/productcategory/truss-clamps/
.
Mounting Diagram
Web Server
The COLORado Solo Batten 4 Web Server can be accessed by any computer on the same network as the product. It
allows network access to system information, settings such as control protocol and starting address, color output testing,
and the ability to change the Web Server password.
To access the Web Server:
1. Set the IP address of the network to have the same first digit as the IP address of the product.
2. Enter the IP address of the product into the URL bar of a web browser application.
3. Enter both the user name and password as admin to log in.
Control Panel Description
Passcode
After being prompted, enter the following passcode by pressing: <UP>, <DOWN>, <UP>, <DOWN>, <ENTER>.
This passcode cannot be changed and must be used whenever prompted.
Button Function
<MENU> Exits from the current menu or function
<ENTER> Enables the currently displayed menu or sets the currently selected value into the selected function
<UP> Navigates upwards through the menu list or increases the numeric value when in a function
<DOWN> Navigates downwards through the menu list or decreases the numeric value when in a function
Safety cable
Mounting clamps
EN
4
COLORado Solo Batten 4 QRG Rev. 2
QUICK REFERENCE GUIDE
Color Macro Chart
Color Temperature Chart
DMX Channel Value Red Value Green Value Blue Value Amber Value White Value
000 010 No function No function No function No function No function
011 034 100% 0–100% 0% 0% 0%
035 059 100–0% 100% 0% 0% 0%
060 084 0% 100% 0–100% 0% 0%
085 109 0% 100–0% 100% 0% 0%
110 134 0–100% 0% 100% 0% 0%
135 159 100% 0% 100–0% 0% 0%
160 184 100% 0–100% 0–100% 0% 0%
185 209 100–0% 100–0% 100% 0% 0%
210 255 100% 100% 100% 100% 100%
DMX Channel Value Color Temperature
000 010 No function
011 028 1800K
029 046 2200K
047 064 2700K
065 082 3000K
083 100 3200K
101 118 3500K
119 136 4000K
137 154 4200K
155 172 4500K
173 190 5600K
191 208 6000K
209 226 6500K
227 244 7200K
245 255 8000K
The color temperatures above are simulated renditions of the color output produced as compared to a
tungsten lamp at the specified color temperature. Chauvet makes no guarantee of the color output
accuracy.
5
EN
QUICK REFERENCE GUIDE
COLORado Solo Batten 4 QRG Rev. 2
Menu Map
Main Level Programming Levels Description
Protocol
DMX512
Selects the control protocol
Art-Net
Art-Net to DMX
sACN
Start
Address
1–510*
Selects DMX address (*highest channel
restricted to personality chosen)
Personality
1 Cell
1 Cell - RGB 3-channel: RGB
1 Cell - RGB EXT
8-channel: 16-bit dimmer, RGB, color
macros, color temperature, strobe
1 Cell - RGBA 4-channel: RGBA
1 Cell - RGBA EXT
9-channel: 16-bit dimmer, RGBA, color
macros, color temperature, strobe
1 Cell - RGBAW 5-channel: RGBAW
1 Cell - RGBAW EXT
10-channel: 16-bit dimmer, RGBAW, color
macros, color temperature, strobe
1 Cell - RGBAW FIN 10-channel: 16-bit RGBAW
1 Cell - RGBAW FULL
16-channel: 16-bit dimmer, 16-bit RGBAW,
color macros, color temperature, strobe,
dimmer mode
1 Cell - HSIC
9-channel: dimmer, 16-bit hue, saturation,
color macros, color temperature, strobe,
dimmer mode, GN saturation
1 Cell - RGBAW Basic
13-channel: dimmer, 16-bit dimmer, RGBAW,
color macros, color temperature, strobe, auto
programs, auto speed, auto delay
4 Cell
4 Cell - RGB 12-channel (4-cell): RGB
4 Cell - RGB EXT
27-channel (4-cell): 16-bit dimmer, RGB,
color macros, color temperature, strobe
4 Cell - RGBA 16-channel (4-cell): RGBA
4 Cell - RGBA EXT
31-channel (4-cell): 16-bit dimmer, RGBA,
color macros, color temperature, strobe
4 Cell - RGBAW 20-channel (4-cell): RGBAW
4 Cell - RGBAW EXT
35-channel (4-cell): 16-bit dimmer, RGBAW,
color macros, color temperature, strobe
4 Cell - RGBAW Fine 40-channel (4-cell): 16-bit RGBAW
4 Cell - RGBAW FULL
56-channel (4-cell): 16-bit dimmer, 16-bit
RGBAW, color macros, color temperature,
strobe, dimmer mode
4 Cell - HSIC
29-channel (4-cell): dimmer, 16-bit hue,
saturation, color macros, color temperature,
strobe, dimmer mode
Network
Net Switch
2.x.x.x Sets network to a preset 2.x.x.x IP address
10.x.x.x Sets network to a preset 10.x.x.x IP address
IP Mode
Default IP Default IP address
Custom IP _ _ _._ _ _._ _ _._ _ _ Set manual IP address
Universe
000–255
(Art-Net™/DMX) or
001–256
(sACN)
Sets universe for Art-Net™ or sACN
Output
Setting
Power Mode
Avoids going over the maximum temperature
by adjusting output intensity
Steady Mode
Uses lower output intensity at a constant rate
to avoid going over the maximum
temperature
EN
6
COLORado Solo Batten 4 QRG Rev. 2
QUICK REFERENCE GUIDE
Static Colors
Preset
Colors
Color 1–14
0–100%
Preset static colors
Color
Temperature
Presets
White 1–14 Preset color temperatures
Manual Color
Mixer
Red Red 0–255
Combine red, green, blue, amber, and white
to make a custom color
Green Green 0–255
Blue Blue 0–255
Amber Amber 0–255
White White 0–255
Auto
Programs
Run
Auto 1–10
0–100%
Selects automatic programs and program
speed
User Program 1–10
Edit
User
Program
1–10
Scene 01–30
Red 0–255
Selects and edits a custom program
Green 0–255
Blue 0–255
Amber 0–255
White 0–255
Strobe 0–255
Master/Slave
Master DMX mode (Master)
Slave Slave mode
Dimmer
Mode
Off Linear dimmer
Dimmer 1–4
Dimming curves Dimmer 1 (fast) to
Dimmer 4 (slow)
LED
Frequency
600Hz
Sets the PWM frequency
1200Hz
2000Hz
4000Hz
6000Hz
25000Hz
Cell Order
1 - 4(Left to Right)
Sets order of cells
4 - 1(Right to Left)
Settings
****
(Enter
Passcode)
DMX Error/
Loss
Hold Last Continues last command upon loss of DMX
Blackout Blacks out product upon loss of DMX
Display
Backlight
Timeout
On Display backlight always on
10s
Turns off display backlight after 10 seconds
of inactivity
20s
Turns off display backlight after 20 seconds
of inactivity
30s
Turns off display backlight after 30 seconds
of inactivity
Display
Passcode
On
Locks display (passcode is <UP>, <DOWN>,
<UP>
, <DOWN>, <ENTER>)
Off
Information
Fixture Hours
_ _ _ _ _ _ _ _
_ _ : _ _
Shows total hours, minutes, and seconds the
product has been powered on
Firmware Version V_._ Shows current firmware version
Device Label Colorado Solo Batten 4 Shows RDM label
Device UID _ _ _ _ _ _ _ _ _ _ _ _ _ _ Shows product UID
MAC Address _ _ _ _ _ _ _ _ _ _ _ _ _ _ Shows MAC address
Factory
Reset
****
(Enter Passcode)
No
Resets the product to factory default settings
Yes
Main Level Programming Levels Description
7
EN
QUICK REFERENCE GUIDE
COLORado Solo Batten 4 QRG Rev. 2
4-Cell DMX Values
4 Cell HSIC (29 Channels)
Channel Function Value Percent/Setting
1 Dimmer 1 000 255 0–100%
2Hue 1 000 255 0–100%
3 Fine hue 1 000 255 0–100%
4 Saturation 1 000 255 0–100%
5Strobe 1
000 009 No function
010 099 Strobe, slow to fast
100 109 No function
110 179 Lightning effect, slow to fast
180 189 No function
190 255 Random strobe, slow to fast
6 Color macros 1 000 255 See Color Macro Chart
7 Color temperatures 1 000 255 See Color Temperature Chart
8 Dimmer 2 000 255 0–100%
9Hue 2 000 255 0–100%
10 Fine hue 2 000 255 0–100%
11 Saturation 2 000 255 0–100%
12 Strobe 2
000 009 No function
010 099 Strobe, slow to fast
100 109 No function
110 179 Lightning effect, slow to fast
180 189 No function
190 255 Random strobe, slow to fast
13 Color macros 2 000 255 See Color Macro Chart
14 Color temperatures 2 000 255 See Color Temperature Chart
15 Dimmer 3 000 255 0–100%
16 Hue 3 000 255 0–100%
17 Fine hue 3 000 255 0–100%
18 Saturation 3 000 255 0–100%
19 Strobe 3
000 009 No function
010 099 Strobe, slow to fast
100 109 No function
110 179 Lightning effect, slow to fast
180 189 No function
190 255 Random strobe, slow to fast
20 Color macros 3 000 255 See Color Macro Chart
21 Color temperatures 3 000 255 See Color Temperature Chart
22 Dimmer 4 000 255 0–100%
23 Hue 4 000 255 0–100%
24 Fine hue 4 000 255 0–100%
25 Saturation 4 000 255 0–100%
26 Strobe 4
000 009 No function
010 099 Strobe, slow to fast
100 109 No function
110 179 Lightning effect, slow to fast
180 189 No function
190 255 Random strobe, slow to fast
27 Color macros 4 000 255 See Color Macro Chart
28 Color temperatures 4 000 255 See Color Temperature Chart
29 Dimmer speed
000 009 Preset dimmer speed from display menu
010 029 Dimmer speed mode off
030 069 Dimmer speed mode 1 (fastest)
070 129 Dimmer speed mode 2
130 189 Dimmer speed mode 3
190 255 Dimmer speed mode 4 (slowest)
EN
8
COLORado Solo Batten 4 QRG Rev. 2
QUICK REFERENCE GUIDE
4 Cell RGBAW Full (56 Channels)
Channel Function Value Percent/Setting
1 Dimmer 000 255 0–100%
2 Fine fimmer 000 255 0–100%
3Red 1 000 255 0–100%
4Fine red 1 000 255 0–100%
5Green 1 000 255 0–100%
6 Fine green 1 000 255 0–100%
7Blue 1 000 255 0–100%
8 Fine blue 1 000 255 0–100%
9Amber 1 000 255 0–100%
10 Fine amber 1 000 255 0–100%
11 White 1 000 255 0–100%
12 Fine white 1 000 255 0–100%
13 Color macros 1 000 255 See Color Macro Chart
14 Color temperatures 1 000 255 See Color Temperature Chart
15 Strobe 1
000 009 No function
010 099 Strobe, slow to fast
100 109 No function
110 179 Lightning effect, slow to fast
180 189 No function
190 255 Random strobe, slow to fast
16 Red 2 000 255 0–100%
17 Fine red 2 000 255 0–100%
18 Green 2 000 255 0–100%
19 Fine green 2 000 255 0–100%
20 Blue 2 000 255 0–100%
21 Fine blue 2 000 255 0–100%
22 Amber 2 000 255 0–100%
23 Fine amber 2 000 255 0–100%
24 White 2 000 255 0–100%
25 Fine white 2 000 255 0–100%
26 Color macros 2 000 255 See Color Macro Chart
27 Color temperatures 2 000 255 See Color Temperature Chart
28 Strobe 2
000 009 No function
010 099 Strobe, slow to fast
100 109 No function
110 179 Lightning effect, slow to fast
180 189 No function
190 255 Random strobe, slow to fast
29 Red 3 000 255 0–100%
30 Fine red 3 000 255 0–100%
31 Green 3 000 255 0–100%
32 Fine green 3 000 255 0–100%
33 Blue 3 000 255 0–100%
34 Fine blue 3 000 255 0–100%
35 Amber 3 000 255 0–100%
36 Fine amber 3 000 255 0–100%
37 White 3 000 255 0–100%
38 Fine white 3 000 255 0–100%
39 Color macros 3 000 255 See Color Macro Chart
40 Color temperatures 3 000 255 See Color Temperature Chart
41 Strobe 3
000 009 No function
010 099 Strobe, slow to fast
100 109 No function
110 179 Lightning effect, slow to fast
180 189 No function
190 255 Random strobe, slow to fast
9
EN
QUICK REFERENCE GUIDE
COLORado Solo Batten 4 QRG Rev. 2
4 Cell RGBAW Fine (40-Channel)
42 Red 4 000 255 0–100%
43 Fine red 4 000 255 0–100%
44 Green 4 000 255 0–100%
45 Fine green 4 000 255 0–100%
46 Blue 4 000 255 0–100%
47 Fine blue 4 000 255 0–100%
48 Amber 4 000 255 0–100%
49 Fine amber 4 000 255 0–100%
50 White 4 000 255 0–100%
51 Fine white 4 000 255 0–100%
52 Color macros 4 000 255 See Color Macro Chart
53 Color temperatures 4 000 255 See Color Temperature Chart
54 Strobe 4
000 009 No function
010 099 Strobe, slow to fast
100 109 No function
110 179 Lightning effect, slow to fast
180 189 No function
190 255 Random strobe, slow to fast
55 Strobe all
000 009 No function
010 099 Strobe, slow to fast
100 109 No function
110 179 Lightning effect, slow to fast
180 189 No function
190 255 Random strobe, slow to fast
56 Dimmer speed
000 009 Preset dimmer speed from display menu
010 029 Dimmer speed mode off
030 069 Dimmer speed mode 1 (fastest)
070 129 Dimmer speed mode 2
130 189 Dimmer speed mode 3
190 255 Dimmer speed mode 4 (slowest)
Channel Function Value Percent/Setting
1Red 1 000 255 0–100%
2Fine red 1 000 255 0–100%
3Green 1 000 255 0–100%
4 Fine green 1 000 255 0–100%
5Blue 1 000 255 0–100%
6 Fine blue 1 000 255 0–100%
7Amber 1 000 255 0–100%
8 Fine amber 1 000 255 0–100%
9White 1 000 255 0–100%
10 Fine white 1 000 255 0–100%
11 Red 2 000 255 0–100%
12 Fine red 2 000 255 0–100%
13 Green 2 000 255 0–100%
14 Fine green 2 000 255 0–100%
15 Blue 2 000 255 0–100%
16 Fine blue 2 000 255 0–100%
17 Amber 2 000 255 0–100%
18 Fine amber 2 000 255 0–100%
19 White 2 000 255 0–100%
20 Fine white 2 000 255 0–100%
21 Red 3 000 255 0–100%
22 Fine red 3 000 255 0–100%
23 Green 3 000 255 0–100%
Channel Function Value Percent/Setting
EN
10
COLORado Solo Batten 4 QRG Rev. 2
QUICK REFERENCE GUIDE
4 Cell RGBAW EXT (35 Channels)
24 Fine green 3 000 255 0–100%
25 Blue 3 000 255 0–100%
26 Fine blue 3 000 255 0–100%
27 Amber 3 000 255 0–100%
28 Fine amber 3 000 255 0–100%
29 White 3 000 255 0–100%
30 Fine white 3 000 255 0–100%
31 Red 4 000 255 0–100%
32 Fine red 4 000 255 0–100%
33 Green 4 000 255 0–100%
34 Fine green 4 000 255 0–100%
35 Blue 4 000 255 0–100%
36 Fine blue 4 000 255 0–100%
37 Amber 4 000 255 0–100%
38 Fine amber 4 000 255 0–100%
39 White 4 000 255 0–100%
40 Fine white 4 000 255 0–100%
Channel Function Value Percent/Setting
1 Dimmer 000 255 0–100%
2 Fine dimmer 000 255 0–100%
3Red 1 000 255 0–100%
4Green 1 000 255 0–100%
5Blue 1 000 255 0–100%
6Amber 1 000 255 0–100%
7White 1 000 255 0–100%
8Color macros 1 000 255 See Color Macro Chart
9 Color temperatures 1 000 255 See Color Temperature Chart
10 Strobe 1
000 009 No function
010 099 Strobe, slow to fast
100 109 No function
110 179 Lightning effect, slow to fast
180 189 No function
190 255 Random strobe, slow to fast
11 Red 2 000 255 0–100%
12 Green 2 000 255 0–100%
13 Blue 2 000 255 0–100%
14 Amber 2 000 255 0–100%
15 White 2 000 255 0–100%
16 Color macros 2 000 255 See Color Macro Chart
17 Color temperatures 2 000 255 See Color Temperature Chart
18 Strobe 2
000 009 No function
010 099 Strobe, slow to fast
100 109 No function
110 179 Lightning effect, slow to fast
180 189 No function
190 255 Random strobe, slow to fast
19 Red 3 000 255 0–100%
20 Green 3 000 255 0–100%
21 Blue 3 000 255 0–100%
22 Amber 3 000 255 0–100%
23 White 3 000 255 0–100%
24 Color macros 3 000 255 See Color Macro Chart
25 Color temperatures 3 000 255 See Color Temperature Chart
Channel Function Value Percent/Setting
11
EN
QUICK REFERENCE GUIDE
COLORado Solo Batten 4 QRG Rev. 2
4 Cell RGBAW (20 Channels)
26 Strobe 3
000 009 No function
010 099 Strobe, slow to fast
100 109 No function
110 179 Lightning effect, slow to fast
180 189 No function
190 255 Random strobe, slow to fast
27 Red 4 000 255 0–100%
28 Green 4 000 255 0–100%
29 Blue 4 000 255 0–100%
30 Amber 4 000 255 0–100%
31 White 4 000 255 0–100%
32 Color macros 4 000 255 See Color Macro Chart
33 Color temperatures 4 000 255 See Color Temperature Chart
34 Strobe 4
000 009 No function
010 099 Strobe, slow to fast
100 109 No function
110 179 Lightning effect, slow to fast
180 189 No function
190 255 Random strobe, slow to fast
35 Strobe all
000 009 No function
010 099 Strobe, slow to fast
100 109 No function
110 179 Lightning effect, slow to fast
180 189 No function
190 255 Random strobe, slow to fast
Channel Function Value Percent/Setting
1Red 1 000 255 0–100%
2Green 1 000 255 0–100%
3Blue 1 000 255 0–100%
4Amber 1 000 255 0–100%
5White 1 000 255 0–100%
6Red 2 000 255 0–100%
7Green 2 000 255 0–100%
8Blue 2 000 255 0–100%
9Amber 2 000 255 0–100%
10 White 2 000 255 0–100%
11 Red 3 000 255 0–100%
12 Green 3 000 255 0–100%
13 Blue 3 000 255 0–100%
14 Amber 3 000 255 0–100%
15 White 3 000 255 0–100%
16 Red 4 000 255 0–100%
17 Green 4 000 255 0–100%
18 Blue 4 000 255 0–100%
19 Amber 4 000 255 0–100%
20 White 4 000 255 0–100%
Channel Function Value Percent/Setting
EN
12
COLORado Solo Batten 4 QRG Rev. 2
QUICK REFERENCE GUIDE
4 Cell RGBA EXT (31 Channels)
Channel Function Value Percent/Setting
1 Dimmer 000 255 0–100%
2 Fine dimmer 000 255 0–100%
3Red 1 000 255 0–100%
4Green 1 000 255 0–100%
5Blue 1 000 255 0–100%
6Amber 1 000 255 0–100%
7Color macros 1 000 255 See Color Macro Chart
8 Color temperatures 1 000 255 See Color Temperature Chart
9Strobe 1
000 009 No function
010 099 Strobe, slow to fast
100 109 No function
110 179 Lightning effect, slow to fast
180 189 No function
190 255 Random strobe, slow to fast
10 Red 2 000 255 0–100%
11 Green 2 000 255 0–100%
12 Blue 2 000 255 0–100%
13 Amber 2 000 255 0–100%
14 Color macros 2 000 255 See Color Macro Chart
15 Color temperatures 2 000 255 See Color Temperature Chart
16 Strobe 2
000 009 No function
010 099 Strobe, slow to fast
100 109 No function
110 179 Lightning effect, slow to fast
180 189 No function
190 255 Random strobe, slow to fast
17 Red 3 000 255 0–100%
18 Green 3 000 255 0–100%
19 Blue 3 000 255 0–100%
20 Amber 3 000 255 0–100%
21 Color macros 3 000 255 See Color Macro Chart
22 Color temperatures 3 000 255 See Color Temperature Chart
23 Strobe 3
000 009 No function
010 099 Strobe, slow to fast
100 109 No function
110 179 Lightning effect, slow to fast
180 189 No function
190 255 Random strobe, slow to fast
24 Red 4 000 255 0–100%
25 Green 4 000 255 0–100%
26 Blue 4 000 255 0–100%
27 Amber 4 000 255 0–100%
28 Color macros 4 000 255 See Color Macro Chart
29 Color temperatures 4 000 255 See Color Temperature Chart
30 Strobe 3
000 009 No function
010 099 Strobe, slow to fast
100 109 No function
110 179 Lightning effect, slow to fast
180 189 No function
190 255 Random strobe, slow to fast
31 Strobe all
000 009 No function
010 099 Strobe, slow to fast
100 109 No function
110 179 Lightning effect, slow to fast
180 189 No function
190 255 Random strobe, slow to fast
13
EN
QUICK REFERENCE GUIDE
COLORado Solo Batten 4 QRG Rev. 2
4 Cell RGBA (16 Channels)
4 Cell RGB EXT (27 Channels)
Channel Function Value Percent/Setting
1Red 1 000 255 0–100%
2Green 1 000 255 0–100%
3Blue 1 000 255 0–100%
4Amber 1 000 255 0–100%
5Red 2 000 255 0–100%
6Green 2 000 255 0–100%
7Blue 2 000 255 0–100%
8Amber 2 000 255 0–100%
9Red 3 000 255 0–100%
10 Green 3 000 255 0–100%
11 Blue 3 000 255 0–100%
12 Amber 3 000 255 0–100%
13 Red 4 000 255 0–100%
14 Green 4 000 255 0–100%
15 Blue 4 000 255 0–100%
16 Amber 4 000 255 0–100%
Channel Function Value Percent/Setting
1 Dimmer 000 255 0–100%
2 Fine dimmer 000 255 0–100%
3Red 1 000 255 0–100%
4Green 1 000 255 0–100%
5Blue 1 000 255 0–100%
6 Color macros 1 000 255 See Color Macro Chart
7 Color temperatures 1 000 255 See Color Temperature Chart
8Strobe 1
000 009 No function
010 099 Strobe, slow to fast
100 109 No function
110 179 Lightning effect, slow to fast
180 189 No function
190 255 Random strobe, slow to fast
9Red 2 000 255 0–100%
10 Green 2 000 255 0–100%
11 Blue 2 000 255 0–100%
12 Color macros 2 000 255 See Color Macro Chart
13 Color temperatures 2 000 255 See Color Temperature Chart
14 Strobe 2
000 009 No function
010 099 Strobe, slow to fast
100 109 No function
110 179 Lightning effect, slow to fast
180 189 No function
190 255 Random strobe, slow to fast
15 Red 3 000 255 0–100%
16 Green 3 000 255 0–100%
17 Blue 3 000 255 0–100%
18 Color macros 3 000 255 See Color Macro Chart
19 Color temperatures 3 000 255 See Color Temperature Chart
20 Strobe 3
000 009 No function
010 099 Strobe, slow to fast
100 109 No function
110 179 Lightning effect, slow to fast
180 189 No function
190 255 Random strobe, slow to fast
EN
14
COLORado Solo Batten 4 QRG Rev. 2
QUICK REFERENCE GUIDE
4 Cell RGB (12 Channels)
21 Red 4 000 255 0–100%
22 Green 4 000 255 0–100%
23 Blue 4 000 255 0–100%
24 Color macros 4 000 255 See Color Macro Chart
25 Color temperatures 4 000 255 See Color Temperature Chart
26 Strobe 4
000 009 No function
010 099 Strobe, slow to fast
100 109 No function
110 179 Lightning effect, slow to fast
180 189 No function
190 255 Random strobe, slow to fast
27 Strobe all
000 009 No function
010 099 Strobe, slow to fast
100 109 No function
110 179 Lightning effect, slow to fast
180 189 No function
190 255 Random strobe, slow to fast
Channel Function Value Percent/Setting
1Red 1 000 255 0–100%
2Green 1 000 255 0–100%
3Blue 1 000 255 0–100%
4Red 2 000 255 0–100%
5Green 2 000 255 0–100%
6Blue 2 000 255 0–100%
7Red 3 000 255 0–100%
8Green 3 000 255 0–100%
9Blue 3 000 255 0–100%
10 Red 4 000 255 0–100%
11 Green 4 000 255 0–100%
12 Blue 4 000 255 0–100%
Channel Function Value Percent/Setting
15
EN
QUICK REFERENCE GUIDE
COLORado Solo Batten 4 QRG Rev. 2
1-Cell DMX Values
1 Cell RGBAW Basic (13 Channels)
Channel Function Value Percent/Setting
1 Dimmer 000 255 0–100%
2 Dimmer fine 000 255 0–100%
3Red 000 255 0–100%
4Green 000 255 0–100%
5Blue 000 255 0–100%
6Amber 000 255 0–100%
7White 000 255 0–100%
8 Color macros 000 255 See Color Macro Chart
9 Color temperatures 000 255 See Color Temperature Chart
10 Strobe
000 009 No function
010 099 Strobe, slow to fast
100 109 No function
110 179 Lightning effect, slow to fast
180 189 No function
190 255 Random strobe, slow to fast
11 Auto programs
000 040 No function
041 050 Auto1
051 060 Auto2
061 070 Auto3
071 080 Auto4
081 090 Auto5
091 100 Auto6
101 110 Auto7
111 120 Auto8
121 130 Auto9
131 140 Auto10
141 150 Program1
151 160 Program2
161 170 Program3
171 180 Program4
181 190 Program5
191 200 Program6
201 210 Program7
211 220 Program8
221 230 Program9
231 240 Program10
12 Auto speed 000 255 Auto programs speed adjust
13 Auto delay 000 255 Auto programs delay adjust
EN
16
COLORado Solo Batten 4 QRG Rev. 2
QUICK REFERENCE GUIDE
1 Cell HSIC (9 Channels)
1 Cell RGBAW FULL (16 Channels)
Channel Function Value Percent/Setting
1 Dimmer 000 255 0–100%
2Hue 000 255 0–100%
3Fine Hue 000 255 0–100%
4 Saturation 000 255 0–100%
5Strobe
000 009 No function
010 099 Strobe, slow to fast
100 109 No function
110 179 Lightning effect, slow to fast
180 189 No function
190 255 Random strobe, slow to fast
6Color macros 000 255 See Color Macro Chart
7 Color temperatures 000 255 See Color Temperature Chart
8 Dimmer speed
000 009 Preset dimmer speed from display menu
010 029 Dimmer speed mode off
030 069 Dimmer speed mode 1 (fastest)
070 129 Dimmer speed mode 2
130 189 Dimmer speed mode 3
190 255 Dimmer speed mode 4 (slowest)
9 GN saturation
000 010 No function
011 029 Full minus green
030 069 -99% to -1%
070 129 No function
130 189 1% to 99%
190 255 Full plus green
Channel Function Value Percent/Setting
1 Dimmer 000 255 0–100%
2 Fine dimmer 000 255 0–100%
3Red 000 255 0–100%
4Fine red 000 255 0–100%
5Green 000 255 0–100%
6Fine green 000 255 0–100%
7Blue 000 255 0–100%
8 Fine blue 000 255 0–100%
9Amber 000 255 0–100%
10 Fine amber 000 255 0–100%
11 White 000 255 0–100%
12 Fine white 000 255 0–100%
13 Color macros 000 255 See Color Macro Chart
14 Color temperatures 000 255 See Color Temperature Chart
15 Strobe
000 009 No function
010 099 Strobe, slow to fast
100 109 No function
110 179 Lightning effect, slow to fast
180 189 No function
190 255 Random strobe, slow to fast
16 Dimmer speed
000 009 Preset dimmer speed from display menu
010 029 Dimmer speed mode off
030 069 Dimmer speed mode 1 (fastest)
070 129 Dimmer speed mode 2
130 189 Dimmer speed mode 3
190 255 Dimmer speed mode 4 (slowest)
17
EN
QUICK REFERENCE GUIDE
COLORado Solo Batten 4 QRG Rev. 2
1 Cell RGBAW FIN (10 Channels)
1 Cell RGBAW EXT (10 Channels)
1 Cell RGBAW (5 Channels)
Channel Function Value Percent/Setting
1Red 000 255 0–100%
2Fine red 000 255 0–100%
3Green 000 255 0–100%
4Fine green 000 255 0–100%
5Blue 000 255 0–100%
6 Fine blue 000 255 0–100%
7Amber 000 255 0–100%
8 Fine amber 000 255 0–100%
9White 000 255 0–100%
10 Fine white 000 255 0–100%
Channel Function Value Percent/Setting
1 Dimmer 000 255 0–100%
2 Fine Dimmer 000 255 0–100%
3Red 000 255 0–100%
4Green 000 255 0–100%
5Blue 000 255 0–100%
6Amber 000 255 0–100%
7White 000 255 0–100%
8 Color Macros 000 255 See Color Macro Chart
9 Color Temperatures 000 255 See Color Temperature Chart
10 Strobe
000 009 No function
010 099 Strobe, slow to fast
100 109 No function
110 179 Lightning effect, slow to fast
180 189 No function
190 255 Random strobe, slow to fast
Channel Function Value Percent/Setting
1Red 000 255 0–100%
2Green 000 255 0–100%
3Blue 000 255 0–100%
4Amber 000 255 0–100%
5White 000 255 0–100%
EN
18
COLORado Solo Batten 4 QRG Rev. 2
QUICK REFERENCE GUIDE
1 Cell RGBA EXT (9 Channels)
1 Cell RGBA (4 Channels)
1 Cell RGB EXT (8 Channels)
1 Cell RGB (3 Channels)
Channel Function Value Percent/Setting
1 Dimmer 000 255 0–100%
2 Fine Dimmer 000 255 0–100%
3Red 000 255 0–100%
4Green 000 255 0–100%
5Blue 000 255 0–100%
6Amber 000 255 0–100%
7Color Macros 000 255 See Color Macro Chart
8 Color Temperatures 000 255 See Color Temperature Chart
9Strobe
000 009 No function
010 099 Strobe, slow to fast
100 109 No function
110 179 Lightning effect, slow to fast
180 189 No function
190 255 Random strobe, slow to fast
Channel Function Value Percent/Setting
1Red 000 255 0–100%
2Green 000 255 0–100%
3Blue 000 255 0–100%
4Amber 000 255 0–100%
Channel Function Value Percent/Setting
1 Dimmer 000 255 0–100%
2 Fine Dimmer 000 255 0–100%
3Red 000 255 0–100%
4Green 000 255 0–100%
5Blue 000 255 0–100%
6Color Macros 000 255 See Color Macro Chart
7 Color Temperatures 000 255 See Color Temperature Chart
8Strobe
000 009 No function
010 099 Strobe, slow to fast
100 109 No function
110 179 Lightning effect, slow to fast
180 189 No function
190 255 Random strobe, slow to fast
Channel Function Value Percent/Setting
1Red 000 255 0–100%
2Green 000 255 0–100%
3Blue 000 255 0–100%
19
ES
GUÍA DE REFERENCIA RÁPIDA
COLORado Solo Batten 4 GRR Rev. 2
Acerca de Esta Guía
La Guía de Referencia Rápida (GRR) del COLORado Solo Batten 4 contiene información básica sobre el producto,
como montaje, opciones de menú y valores DMX. Descargue el Manual de Usuario de www.chauvetprofessional.com
para información más detallada.
Exención de Responsabilidad
La información y especificaciones contenidas en esta GRR están sujetas a cambio sin previo aviso.
GARANTÍA LIMITADA
PARA VER EL REGISTRO DE GARANTÍA Y LOS TÉRMINOS Y CONDICIONES COMPLETOS, VISITE NUESTRO SITIO WEB.
Para clientes en los Estados Unidos y México: www.chauvetlighting.com/warranty-registration.
Para clientes en Reino Unido, República de Irlanda, Bélgica, Países Bajos, Luxemburgo, Francia y Alemania:
www.chauvetlighting.eu/warranty-registration
.
Chauvet garantiza que este producto estará libre de defectos de material y mano de obra en condiciones de uso
normales, durante el periodo especificado, sujeto siempre a las exclusiones y limitaciones establecidas en la garantía
limitada completa de nuestro sitio web. Esta garantía se concede únicamente al comprador original del producto y no es
transferible. Para ejercer los derechos que otorga esta garantía, usted debe proporcionar una prueba de compra en forma
de un recibo de compra original, expedido por un distribuidor autorizado, donde figure el nombre del producto y la fecha
de compra. NO EXISTEN OTRAS GARANTÍAS EXPRESAS NI IMPLÍCITAS. Esta garantía le otorga derechos legales
específicos. Es posible que a usted le asistan otros derechos, que variarán dependiendo del estado o del país. Esta
garantía solamente es válida en los Estados Unidos, Reino Unido, República de Irlanda, Bélgica, Países Bajos,
Luxemburgo, Francia, Alemania y México. Para conocer los términos de garantía en otros países, consulte a su
distribuidor local.
Notas de Seguridad
NO abra este producto. No contiene piezas reparables por el usuario.
Para evitar un desgaste innecesario y alargar su vida útil, desconecte complemente el producto de la alimentación,
mediante el interruptor o desenchufándolo, durante los periodos en los que no se use.
NO mire a la fuente de luz cuando el producto esté encendido.
CUIDADO: La carcasa de este producto está caliente cuando las luces están en funcionamiento.
Monte este producto en una ubicación con ventilación adecuada, al menos a 20'' (50 cm) de superficies
adyacentes.
NO deje ningún material inflamable a menos de 50 cm de este producto mientras esté funcionando o conectado a
la alimentación.
Cuidado: cuando transfiera el producto desde ambientes con temperatura extrema (p. ej., del remolque frío de un
camión a una sala de baile con calor y humedad), puede formarse condensación en la electrónica interna del
producto. Para evitar que se produzca una avería, deje que el producto se aclimate completamente al ambiente
antes de conectar la alimentación.
No apto para la instalación permanente en exteriores en lugares con condiciones ambientales extremas. Estas
incluyen, sin limitarse a ellas:
Exposición a un ambiente marino/salino (a menos de 4,8 km de una masa de agua salada).
Cuando las temperaturas máxima o mínima habituales del lugar superan los rangos de temperatura en este
manual.
Lugares proclives a inundaciones o a ser sepultados por la nieve.
Otras zonas en las que el producto esté expuesto a radiación extrema o sustancias cáusticas.
USE un cable de seguridad cuando monte este producto en lo alto.
NO sumerja este producto (IP65). La operación normal en exteriores es correcta.
NO ponga en funcionamiento este producto si sospecha que la carcasa, lentes o cables están dañados.
NO conecte este producto a un atenuador o reostato.
Conecte este producto SOLO a un circuito con toma de tierra y protegido.
Use SOLAMENTE los soportes de colgar/montar para mover este producto.
En caso de un problema grave de funcionamiento, deje de usarlo inmediatamente.
La máxima temperatura ambiente es de 113 °F (45 °C). No haga funcionar este producto a temperaturas más altas.
La temperatura de inicio máxima es de -4 °F (-20 °C). No ponga en funcionamiento el producto a temperaturas más
bajas.
La temperatura ambiente mínima es de -22 °F (-30 °C). No haga funcionar el producto a temperaturas más bajas.
Cumplimiento de la FCC
Este dispositivo cumple la parte 15, parte B de las normas FCC. El Funcionamiento está supeditado al cumplimiento de
estas dos condiciones:
1. Este dispositivo no puede causar interferencias perjudiciales; y
2. Este dispositivo debe aceptar cualquier interferencia recibida, incluyendo las interferencias que puedan causar
un funcionamiento no deseado.
Cualquier cambio o modificación que no haya sido expresamente autorizado por la parte responsable de conformidad
puede anular la potesdad del usuario para hacer funcionar el equipo.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72
  • Page 73 73
  • Page 74 74
  • Page 75 75
  • Page 76 76
  • Page 77 77
  • Page 78 78
  • Page 79 79
  • Page 80 80
  • Page 81 81
  • Page 82 82
  • Page 83 83
  • Page 84 84
  • Page 85 85
  • Page 86 86
  • Page 87 87
  • Page 88 88
  • Page 89 89
  • Page 90 90
  • Page 91 91
  • Page 92 92
  • Page 93 93
  • Page 94 94
  • Page 95 95
  • Page 96 96

Chauvet COLORado Solo Batten 4 Guide de référence

Catégorie
Projecteurs
Taper
Guide de référence
Ce manuel convient également à