VTech DS6291-3 Manuel utilisateur

BC

DS6291

DS6291-2

DS6291-3

DS6292-5

DECT 6.0 cordless telephone

with BLUETOOTH® wireless technology

Go to www.vtechphones.com

to register your product for

enhanced warranty support and

latest VTech product news.

User’s manual

Congratulations

on purchasing your new VTech product.

Before using this telephone, please read

Important safety instructions.

This manual has all the feature

operations and troubleshooting

necessary to install and operate your

new VTech telephone. Please review

this manual thoroughly to ensure

proper installation and operation of

this innovative and feature rich VTech

product.

For support, shopping, and everything

new at VTech, visit our website at

www.vtechphones.com.

In Canada, please visit

www.vtechcanada.com.

Telephones identiﬁed with

this logo have reduced

noise and interference

when used with most T-coil

equipped hearing aids

and cochlear implants.

The TIA-1083 Compliant

Logo is a trademark of

the Telecommunications

Industry Association. Used

under license.

Important safety

instructions

When using your telephone equipment,

basic safety precautions should always

be followed to reduce the risk of ﬁre,

electric shock and injury, including the

following:

Read and understand all instructions.

Follow all warnings and instructions

marked on the product.

Unplug this product from the wall

outlet before cleaning. Do not use

liquid or aerosol cleaners. Use a

damp cloth for cleaning.

Do not use this product near water

such as near a bath tub, wash bowl,

kitchen sink, laundry tub or swimming

pool, or in a wet basement or shower.

Do not place this product on an

unstable table, shelf, stand or other

unstable surfaces.

Slots and openings in the back or

bottom of the telephone base and

handset are provided for ventilation.

To protect them from overheating,

these openings must not be blocked

by placing the product on a soft

surface such as a bed, sofa or

rug. This product should never be

placed near or over a radiator or heat

register. This product should not be

placed in any area where proper

ventilation is not provided.

This product should be operated

only from the type of power source

indicated on the marking label. If

you are not sure of the type of power

supply in your home or ofﬁce, consult

your dealer or local power company.

Do not allow anything to rest on

the power cord. Do not install this

product where the cord may be

walked on.

1.

2.

3.

4.

5.

6.

7.

8.

T

Compatible with

Hearing Aid T-Coil

TIA-1083

Register online to get an

additional 3-month warranty!

Visit www.vtechphones.com.

Registration

Register your product

online for enhanced

warranty support.

Product news

Learn about the latest

VTech products.

Never push objects of any kind into

this product through the slots in the

telephone base or handset because

they may touch dangerous voltage

points or create a short circuit. Never

spill liquid of any kind on the product.

To reduce the risk of electric shock,

do not disassemble this product,

but take it to an authorized service

facility. Opening or removing parts of

the telephone base or handset other

than speciﬁed access doors may

expose you to dangerous voltages or

other risks. Incorrect reassembling

can cause electric shock when the

product is subsequently used.

Do not overload wall outlets and

extension cords.

Unplug this product from the wall

outlet and refer servicing to an

authorized service facility under the

following conditions:

When the power supply cord or

plug is damaged or frayed.

If liquid has been spilled onto the

product.

If the product has been exposed

to rain or water.

If the product does not operate

normally by following the

operating instructions. Adjust only

those controls that are covered

by the operation instructions.

Improper adjustment of other

controls may result in damage and

often requires extensive work by

an authorized technician to restore

the product to normal operation.

If the product has been dropped

and the telephone base and/or

handset has been damaged.

If the product exhibits a distinct

change in performance.

9.

10.

11.

12.

•

Avoid using a telephone (other than

cordless) during an electrical storm.

There is a remote risk of electric

shock from lightning.

Do not use the telephone to report

a gas leak in the vicinity of the

leak. Under certain circumstances,

a spark may be created when the

adapter is plugged into the power

outlet, or when the handset is

replaced in its cradle. This is a

common event associated with the

closing of any electrical circuit. The

user should not plug the phone

into a power outlet, and should

not put a charged handset into

the cradle, if the phone is located

in an environment containing

concentrations of ﬂammable or

ﬂame-supporting gases, unless there

is adequate ventilation. A spark in

such an environment could create a

ﬁre or explosion. Such environments

might include: medical use of

oxygen without adequate ventilation;

industrial gases (cleaning solvents;

gasoline vapors; etc.); a leak of

natural gas; etc.

Only put the handset of your

telephone next to your ear when it is

in normal talk mode.

The power adapters are intended to

be correctly oriented in a vertical or

ﬂoor mount position. The prongs are

not designed to hold the plug in place

if it is plugged into a ceiling,

under-the-table or cabinet outlet.

SAVE THESE INSTRUCTIONS

Battery

CAUTION: Use Only Supplied

Battery.

Do not dispose of the battery in a fire.

Check with local waste management

codes for special disposal instructions.

13.

14.

15.

16.

•

Do not open or mutilate the battery.

Released electrolyte is corrosive and

may cause burns or injury to the eyes

or skin. The electrolyte may be toxic if

swallowed.

Exercise care in handling batteries in

order not to create a short circuit with

conductive materials.

Charge the battery provided with this

product only in accordance with the

instructions and limitations specified

in this manual.

Precautions for users of

implanted cardiac pacemakers

Cardiac pacemakers (applies only to

digital cordless telephones):

Wireless Technology Research, LLC

(WTR), an independent research entity,

led a multidisciplinary evaluation of the

interference between portable wireless

telephones and implanted cardiac

pacemakers. Supported by the U.S.

Food and Drug Administration, WTR

recommends to physicians that:

Pacemaker patients

Should keep wireless telephones at

least six inches from the pacemaker.

Should NOT place wireless telephones

directly over the pacemaker, such as in

a breast pocket, when it is turned ON.

Should use the wireless telephone at

the ear opposite the pacemaker.

WTR’s evaluation did not identify any

risk to bystanders with pacemakers

from other persons using wireless

telephones.

About cordless telephones

Privacy: The same features that make

a cordless telephone convenient

create some limitations. Telephone

calls are transmitted between the

telephone base and the cordless

handset by radio waves, so there is a

•

possibility that the cordless telephone

conversations could be intercepted

by radio receiving equipment within

range of the cordless handset. For

this reason, you should not think of

cordless telephone conversations as

being as private as those on corded

telephones.

Electrical power: The telephone

base of this cordless telephone must

be connected to a working electrical

outlet. The electrical outlet should not

be controlled by a wall switch. Calls

cannot be made from the cordless

handset if the telephone base is

unplugged, switched off or if the

electrical power is interrupted.

Potential TV interference: Some

cordless telephones operate

at frequencies that may cause

interference to televisions and

VCRs. To minimize or prevent

such interference, do not place

the telephone base of the cordless

telephone near or on top of a TV or

VCR. If interference is experienced,

moving the cordless telephone farther

away from the TV or VCR often

reduces or eliminates the interference.

Rechargeable batteries: Exercise

care in handling batteries in order

not to create a short circuit with

conducting material such as rings,

bracelets and keys. The battery or

conductor may overheat and cause

harm. Observe proper polarity

between the battery and the battery

charger.

Nickel-metal hydride rechargeable

batteries: Dispose of these batteries

in a safe manner. Do not burn or

puncture the battery. Like other

batteries of this type, if burned or

punctured, they could release caustic

material which could cause injury.

•

Table of contents

What’s in the box? ......................1

Overview ......................................2

Telephone base overview ...................2

Charger overview ...............................6

Display icons overview .......................6

Handset and Telephone base

lights overview .................................7

Connect ........................................8

Connect the telephone base ...............8

Connect the charger ...........................8

Mount the telephone base ..................8

Install and charge the battery .............9

Charge the battery ............................10

Before use ........................................11

Bluetooth ....................................12

Glossary of terms ............................13

Bluetooth setup .................................14

VTech Connect to CellTM application ...14

Add a Bluetooth enabled cell phone ...14

Add a Bluetooth enabled headset ....16

Bluetooth connection from

idle mode .......................................17

Connect a paired cell phone

or headset .....................................17

Review the cell devices list ...............17

Download directory ...........................17

Configure your telephone ........19

Using the handset menu ...................19

Set language ....................................19

Set date and time .............................19

Caller ID announce ...........................19

Use caller ID to automatically set

date and time ................................20

Home area code ...............................21

Cell area code ..................................21

Dial mode .........................................22

QUIET mode .....................................23

Temporary tone dialing .....................23

Telephone Operations ..............24

Make a home call .............................24

Predial a home call ...........................24

Answer a home call ..........................24

End a home call ................................24

Call waiting on the home line ............25

Make a cell call .................................25

Predial a cell call ...............................25

Answer a cell call ..............................25

End a cell call ...................................25

Call waiting on the cell line ...............25

Answer a cell call while on

a home call ....................................26

Answer a home call while on

a cell call .......................................26

Conference home and cell calls .......26

Speakerphone ..................................27

Volume control ..................................27

Mute ..................................................27

Equalizer ...........................................27

Chain dialing .....................................28

Temporary tone dialing .....................28

Hold ..................................................28

Find handset .....................................29

Join a call in progress .......................29

Intercom .....................................30

Initiate, answer, and end

an intercom ...................................30

Answer an incoming call during

an intercom call .............................31

Call transfer using intercom ..............31

Push-to-talk (PTT) .....................33

Turn PTT on or off ............................33

PTT call to single device ...................33

PTT call to multiple devices ..............35

Answer a PTT call.............................36

Change a one-to-one PTT call to

an intercom call .............................36

Answer an incoming call during

a PTT call ......................................37

Make an outgoing call during

PTT call .........................................37

End or leave a PTT call ....................38

Redial ..........................................38

Review a redial list entry ...................38

Dial a redial list entry ........................38

Delete a redial list entry ....................38

Directory .....................................39

Add a home directory entry ..............39

Review directory entries ...................40

Alphabetical search ..........................40

Delete a phonebook entry ................41

Edit a directory entry ........................41

Edit the type of a directory entry .......41

Dial a directory entry ........................42

Remove a downloaded directory ......42

Caller ID ......................................42

Review the caller ID log ....................42

Memory match ..................................43

Missed call indicator .........................43

View dialing options ..........................43

Dial a caller ID log entry ...................44

Save a caller ID log entry to

the phonebook ..............................44

Delete the caller ID log entries .........44

Sound settings .........................45

Key tone ............................................45

Ringer tone .......................................45

Handset ringer volume .....................46

Telephone base ringer volume .........46

Temporary ringer silencing ...............46

About the built-in answering

system and

voicemail service ...................47

Set your built-in

answering system ..................48

Turn the answering system on or off ....48

Default announcement .....................48

Record your own announcement ......48

Play your announcement ..................49

Delete your announcement ..............49

Set number of rings .........................49

Turn the call screening on or off .......50

Turn the message alert tone on

or off ..............................................50

Using your built-in

answering system ..................51

New message indication ...................51

Message playback ............................51

Delete all messages .........................52

Record, play, and delete memos ......52

Remote access .................................53

Set remote access code ...................53

Call screening ...................................54

Call intercept .....................................54

Using your built-in answering

system and

voicemail service ...................55

Retrieve voicemail from

telephone service ...................55

Retrieve voicemail ............................55

Turn off then new

voicemail indicators .......................55

Cell phone voicemail ........................55

Expand your telephone

system ....................................56

Screen messages ......................56

ECO mode ..................................60

General product care ................60

Frequently asked questions .....61

The RBRC® seal .........................64

FCC, ACTA and IC

regulations .............................64

California Energy Commission

battery charging testing

instructions .............................66

For C-UL compliance only ........67

Limited Warranty .......................70

Technical Specifications ........... 72

1

What’s in the box?

Your telephone package contains the

following items. Save your sales receipt

and original packaging in case it is

necessary to ship your telephone for

warranty service.

NOTE

To purchase replacement batteries or power

adapters, visit our website at

www.vtechphones.com or call

1 (800) 595-9511. In Canada, go to

www.vtechcanada.com or dial

1 (800) 267-7377.

1 set for DS6291;

2 sets for DS6291-2;

3 sets for DS6291-3;

5 sets for DS6292-5

Abridged user’s

manual

Quick start guide

1 set for DS6291-2;

2 sets for DS6291-3;

4 sets for DS6291-5

1 set for DS6291/DS6291-2/

DS6291-3/DS6292-5

Important Safety

Instructions

1 set for DS6291/DS6291-2/

DS6291-3/DS6292-5

2

Overview

Telephone base overview

1 – Right Soft key

• Press to select the menu item

displayed above the key.

• While in a menu, press to select

an item; or save an entry or

setting.

Left Soft key

• Press to return to the previous

menu.

2 – 1

• Press repeatedly to add or

remove 1 in front of the caller ID

log entry before dialing or

saving it to the directory.

• Press and hold to set or dial your

voicemail number.

3 – CANCEL

• Silence the ringer temporarily

while the telephone base is

ringing.

•

Press and hold to erase the

missed call indicator while the

phone is not in use.

• Press to return to the previous

menu; or press and hold to return

to idle mode, without making

changes.

4 – /FIND HANDSET

• Press to page all system

handsets.

5 – FLASH

• Press to put the current home

call on hold when there is an

incoming call.

• Answer an incoming home call

when you hear a call waiting

alert.

6 – /VOL/

• Adjust the volume during a call or

message playback.

• Adjust the telephone base ringer

volume when the phone is not in

use.

7 – 0

• While you have set the dial mode

to pulse and on a call, press to

switch to tone dialing temporarily.

8 – Charging pole

9 – PTT (Push to talk)

• Press to display the PTT menu to

begin a PTT call.

• Press and hold to begin a

one-to-group PTT call.

• Press and hold while talking in a

PTT call.

10 – MIC (Microphone)

1

2

3

4

5

6

8

7

14

15

16

17

13

18

19

20

22

23

24

21

9

10

11

12

25

26

3

11 –

• Press to add a space when

entering names.

12 – CELL 1 and

CELL 2/HEADSET lights

• On when the telephone base

is paired and connected with a

Bluetooth device.

• Flash when the telephone base

is in discoverable mode.

13 – LCD display

14 – REDIAL/PAUSE

• Press repeatedly to review the

redial list.

• Press and hold to insert a dialing

pause while entering a number.

15 – CALLER ID /

• Review the caller ID log when

the phone is not in use.

• Scroll down while in a menu, or

in the directory, caller ID log, or

redial list.

• Move the cursor to the left when

entering numbers or names.

16 – PHONEBOOK /

• Review the directory when the

phone is not

in use.

• Scroll up while in a menu, or in

the directory, caller ID log, or

redial list.

• Move the cursor to the right when

entering numbers or names.

17 – /ANS ON/OFF

• Turn the answering system on or

off.

18 – CELL 1 and CELL 2

• M

ake a cell call.

• M

ake or answer a home or cell

call.

• Answer an incoming cell call

when you hear a call waiting

alert.

19 – X/DELETE

• Delete digits or characters while

using dialing keys.

• Delete the playing message.

• Press twice to delete all

previously reviewed messages

when the phone is not in use.

20 – /REPEAT

• Press to repeat a message.

• Press twice to play the previous

message.

21 – /SKIP

• Skip to the next message.

22 – /PLAY/STOP

• Play messages.

• Stop playing messages.

23 – /HOME

• M

ake a home call.

• A

nswer a home or cell call.

• Hang up a home call.

24 – MUTE

• Mute the microphone during a

call.

• Silence the ringer temporarily

while the telephone base is

ringing.

25 – USB port

• Connect and charge your cell

phones.

26 –

• Press and hold to enter quiet

mode.

• Press repeatedly to show other

dialling options when reviewing a

caller ID log entry.

4

Handset overview

1 – CHARGE light

2 – LCD display

3 – Right Soft key

• Press to select the menu item

displayed above the key.

• While in a menu, press to select

an item; or save an entry or

setting.

Left Soft key

• Press to return to the previous

menu.

4 – /CELL 1 and /CELL 2

• M

ake a cell call.

• M

ake or answer a home or cell

call.

• Answer an incoming cell call

when you hear a call waiting

alert.

5 – /HOME/FLASH

• M

ake a home call.

• M

ake or answer a home or cell

call.

• Press to put the current call on

hold when there is an incoming

call.

• Answer an incoming home call

when you hear a call waiting alert.

6 – 1

• Press repeatedly to add or

remove 1 in front of the caller ID

log entry before dialing or saving

it to the directory.

• Press and hold to set or dial your

voicemail number.

7 –

• While you have set the dial mode

to pulse and on a call, press to

switch to tone dialing temporarily.

8 –

• Make or answer a call using the

handset speakerphone.

• During a call, press to switch

between the speakerphone and

the handset.

9 – REDIAL/PAUSE

• Press repeatedly to review the

redial list.

• Press and hold to insert a dialing

pause while entering a number.

10 – Earpiece

11 – PUSH TO TALK

• Press to display the Push to talk

(PTT) menu to begin a PTT call.

• Press and hold to begin a one-

to-group PTT call.

• Press and hold while talking in a

PTT call.

2

5

6

7

8

9

1

15

16

17

14

11

10

3

4

13

12

5

12 – VOLUME/ /

• Review the directory when the

phone is not in use.

• Increase the listening volume

during a call or message

playback.

• Scroll up while in a menu, or in

the directory, caller ID log, or

redial list.

• Move the cursor to the right when

entering numbers or names.

VOLUME/ /CID

• Review the caller ID log when

the phone is not in use.

• Decrease the listening volume

during a call or message

playback.

• Scroll down while in a menu, or

in the directory, caller ID log, or

redial list.

• Move the cursor to the left when

entering numbers or names.

13 – OFF/CANCEL

• Hang up a call.

• Silence the ringer temporarily

while the handset is ringing.

•

Press and hold to erase the

missed call indicator while the

phone is not in use.

• Press to return to the previous

menu, or

press and hold to return to idle

mode, without making changes.

14 –

• Press to add a space when

entering names.

15 –

• Press and hold to enter quiet

mode.

• Press repeatedly to show other

dialing options when reviewing a

caller ID log entry.

16 – MUTE/DELETE

• Mute the microphone during a

call.

• Delete digits or characters while

using the dialing keys.

• Delete the playing message on

the handset.

• Silence the ringer temporarily

while the handset is ringing.

17 – Microphone

6

Charger overview

1 – Charging pole

Display icons overview

Handset icons

HOME line - On steadily when

the home line is in use or there

is an incoming home call.

1

2

CELL line - On steadily when

a cell line is in use or there is

an incoming cell call.

1 2 Bluetooth connected

devices - There are Bluetooth

connected devices on the

active devices list.

1 2Bluetooth disconnected

devices - There are Bluetooth

disconnected devices on the

active devices list.

2 Wireless Bluetooth headset

- On steadily when a wireless

Bluetooth headset is in use on

the home line.

Battery status - battery is

charging (animated display).

Battery status - the battery

icon ﬂashes when the battery

is low and needs charging.

Speakerphone - the

speakerphone is in use.

Ringer off - the handset

ringer is off.

New voicemail - you have

new voicemail from your

telephone service provider.

ANS

ON

Answering system on - the

answering system is turned on

to answer calls.

Message - new message in

the built-in answering system.

ECO

ECO mode - activates

automatically to reduce

power consumption when the

handset is within range from

the telephone base.

NEW New caller ID log - new and

missed calls.

MUTE MUTE - the handset

microphone is off.

1

7

Telephone base icons

HOME line - On steadily when

the home line is in use or there

is an incoming home call.

1

2

CELL line - On steadily when

a cell line is in use or there is

an incoming cell call.

1 2 Bluetooth connected

devices - There are Bluetooth

connected devices on the

active devices list.

1 2Bluetooth disconnected

devices - There are Bluetooth

disconnected devices on the

active devices list.

2 Wireless Bluetooth headset

- On steadily when a wireless

Bluetooth headset is in use on

the home line.

Ringer off - the handset

ringer is off.

New voicemail - you have

new voicemail from your

telephone service provider.

ANS

ON

Answering system on - the

answering system is turned on

to answer calls.

Message - new message in

the built-in answering system.

ECO

ECO mode - activates

automatically to reduce

power consumption when the

handset is within range from

the telephone base.

NEW New caller ID log - new and

missed calls.

MUTE MUTE - the telephone base

microphone is off.

Handset and Telephone base

lights overview

Handset lights

On when the handset

speakerphone is in use.

CHARGE On when the handset

is charging in the

telephone base or

handset charger.

Telephone base lights

/HOME On when the telephone

line is in use.

On when the answering

system is answering

a call.

On when you are

registering a handset.

Flashes quickly when

there is an incoming call.

Flashes when another

telephone sharing the

same line is in use.

Flashes when you

are deregistering all

handsets.

CELL 1/

CELL 2

On when the cell line is

in use.

Flashes quickly when

there is an incoming

cell call.

Flashes slowly when the

cell call is on hold.

/ANS ON/OFF On when the answering

system is turned on.

8

Connect

You can choose to connect the telephone

base for desktop usage or wall mounting.

NOTES

Use only the adapters provided.

Even if you do not subscribe to any

conventional telephone service, you can

pair a Bluetooth enabled cell phone to

your telephone base (see Bluetooth), and

use the cell line alone without plugging in

a telephone line cord.

Make sure the electrical outlets are not

controlled by wall switches.

The adapters are intended to be correctly

oriented in a vertical or ﬂoor mount

position. The prongs are not designed to

hold the plug in place if it is plugged into a

ceiling, under-the-table or cabinet outlet.

TIP

If you subscribe to digital subscriber line

(DSL) high-speed Internet service through

your telephone line, make sure you install

a DSL filter (not included) between the

telephone line cord and telephone wall

jack. Contact your DSL service provider

for more information.

Connect the telephone base

•

Connect the charger

Mount the telephone base

The telephone comes ready for tabletop

use. If you have already installed the

telephone for tabletop use, unplug the

telephone line cord from the telephone

wall jack, and unplug the telephone

base power adapter from the wall outlet

before mounting your telephone on a

wall. Follow the steps below to mount

your telephone on a wall.

Press down on the tabs on the wall

mount bracket on the telephone base

to release it from tabletop orientation.

1.

9

Install and charge the battery

Install the battery as shown below.

NOTES

Use only supplied battery.

If the handset will not be used for a long

time, disconnect and remove the battery to

prevent possible leakage.

•

Connect the power adapter to the

telephone base and an electrical

outlet not controlled by a wall switch.

4.

3. Plug the telephone line cord (orPlug the telephone line cord (or DSL

filter) into the wall jack. Align the

holes on the back of the telephone

base with the standard wall plate.

Slide the bracket down until it clicks

securely in place. Connect the power

adapter to the telephone base and an

electrical outlet not controlled by a

wall switch.

2 Rotate the wall mount bracket down

to wall mount position and then push

it into the telephone base until it clicks

into place.

1

3

THIS SIDE UP

10

Charge the battery

Place the handset in the telephone base

or the charger to charge.

Once you have installed the battery,

the handset LCD display indicates the

battery status (see the table below).

NOTES

For best performance, keep the handset in the

telephone base or charger when not in use.

The battery is fully charged after 12 hours

of continuous charging.

If you place the handset in the telephone

base or the charger without plugging in the

battery, the screen displays No battery.

Battery

indicators

Battery

status

Action

The screen

is blank,

or displays

Place in

charger

and

flashes.

The battery

has no or

very little

charge. The

handset

cannot be

used.

Charge

without

interruption

(about 30

minutes).

The screen

displays

Low

battery and

flashes.

The battery

has enough

charge to be

used for a

short time.

Charge

without

interruption

(about 30

minutes).

The screen

displays

HANDSET

X.

The battery

is charged.

To keep

the battery

charged,

place it in the

telephone

base or

handset

charger when

not in use.

•

When it is fully charged, you can expect

the following performance:

Operation Operating time

While in handset

use (talking*) Seven hours

While in

speakerphone

mode (talking*)

Three hours

While not in use

(standby**) Seven days

* Operating times vary depending on your actual

use and the age of the battery.

** Handset is not charging or in use.

CHARGE light

remains on when

charging.

11

Before use

After you install your telephone or

power returns following a power outage,

the handset will prompt you to set the

date and time.

If you choose to set up the date and

time at a later stage, you can do it

manually.

Set date and time

NOTE

Make sure you set the date and time

including the year correctly; otherwise the

answering system does not announce the

correct day of the week for your recorded

messages time stamp.

Use the dialing keys (0-9) to enter the

month, date, and year, and then press

NEXT .

Use the dialing keys (0-9) to enter the

hour and minute.

Scroll to chooseto choose AM or PM, and then

press SAVE to save.

Check for a dial tone:

Press /HOME. If you hear a dial tone,

the installation is successful.

If you do not hear a dial tone:

Make sure the installation procedures

described above are properly done.

It may be a wiring problem. If you

have changed your telephone

service to digital service from a

cable company or a VoIP service

provider, the telephone line may need

to be rewired to allow all existing

telephone jacks to work. Contact your

cable/VoIP service provider for more

information.

•

1.

2.

3.

•

Operating range

This cordless telephone operates with

the maximum power allowed by the

Federal Communications Commission

(FCC). Even so, this handset and

telephone base can communicate over

only a certain distance - which can

vary with the locations of the telephone

base and handset, the weather, and the

layout of your home or ofﬁce.

When the handset is out of range, the

handset displays Out of range OR no

power at base and Put HS on base to

power base alternately.

If there is a call while the handset is out

of range, it may not ring, or if it does

ring, the call may not connect well when

you press /HOME, /CELL 1, or

/CELL 2. Move closer to the telephone

base, and then press /HOME or

/CELL 1, or /CELL 2. to answer

the call. If the handset moves out of

range during a telephone conversation,

there may be interference. To improve

reception, move closer to the telephone

base.

12

Bluetooth

Your new DS6291/DS6292 telephone

system with Bluetooth wireless

technology has the following features:

Pair and connect up to a maximum

of two cell phones with the telephone

base to make and receive cell calls.

Only one cell phone can be active on

a call at a time.

Make and receive calls using your

cell phone plan while utilizing the

ease and comfort of your home

telephone system.

Receive phonebook entries from your

cell phone.

IMPORTANT INFORMATION

Refer to the user's manual of your

Bluetooth enabled cell phone for

more information about how that

device uses Bluetooth connectivity.

Bluetooth wireless technology

operates within a short range (a

maximum of approximately 30 feet)

from the telephone base. Keep

connected cell phones within this

range. For optimal performance,

keep your cell phone within 15 feet

of the telephone base while using the

DS6291/DS6292 cell line.

•

If your cell phone has poor reception

in your home, the DS6291/DS6292

cannot improve the reception.

However, if there is a location in your

house with better reception, you can

leave your cell phone at that location

while using the DS6291/DS6292 cell

line.

If you experience poor sound quality,

place your cell phone closer to the

DS6291/DS6292 to ensure strong

Bluetooth signal strength. Make

sure there are no physical obstacles

between the DS6291/DS6292 and

the cell phone, such as large furniture

or thick walls.

Charge your cell phone while it

is connected to the telephone

base. Your cell phone's battery will

discharge faster while it is connected

to the telephone base via Bluetooth

wireless technology.

Monitor your cell phone's usage

because minutes are deducted from

your cellular plan for the duration of

all cell calls.

Refer to Bluetooth setup to learn how

to set up and manage your Bluetooth

enabled devices. Refer to Telephone

operation on how to operate your

Bluetooth devices with your new

DS6291/DS6292 telephone system with

Bluetooth wireless technology. Refer

to Troubleshooting if you experience

difﬁculty using the telephone system.

•

The Bluetooth® word mark and logos are

owned by Bluetooth SIG, Inc. and any use

of such marks by VTech Holdings Limited

is under license. VTech Holdings Limited

is a member of Bluetooth SIG, Inc. Other

trademarks and trade names are those of

their respective owners.

DS6291/DS6292 Cellular

signal

Less than 15 feet for

optimal performance

13

Glossary of terms

Below are some terms used in this

user’s manual to help you become

familiar with using your Bluetooth enabled

cell phone and your new DS6291/DS6292

telephone system.

Bluetooth cell phone - refers to a

Bluetooth enabled cellular telephone.

Cell line - the telephone line associated

with your cell phone service. On your

DS6291/DS6292 handset, press

/CELL to use the cell line.

Connected - when you pair a Bluetooth

cell phone to the DS6291/DS6292, it is

automatically connected. When a cell

phone is connected, 1 and/or 2 displays

after on the handset and the CELL

1 and/or CELL 2/HEADSET light on

the telephone base is on. If a cell phone

loses its connection to the telephone

base, it must be reconnected before

you can use the cell phone with the

DS6291/DS6292.

Disconnected - when a cell phone is

disconnected, the on the handset

no longer displays and the CELL 1

and/or CELL 2/HEADSET light on

the telephone base is off.

Discoverable mode - before a

Bluetooth enabled device can be paired,

it must be set to this mode. When

pairing your cell phone, the telephone

base will be set to this mode. Depending

on the manufacturer, this mode is

sometimes referred to as Find Me or

Visibility.

Home line - your conventional

telephone land line. On your

DS6291/DS6292 handset, press

/HOME/FLASH to use the home line.

Paired device - once a Bluetooth

enabled cell phone has been paired

with the telephone base, it appears

on the cell devices list. A maximum of

two cell phones can be paired with the

telephone base.

Pairing - this refers to the process of

Bluetooth enabled cell phone registering

device information with each other.

The telephone base must be paired

with the Bluetooth enabled cell phone

before it can be used. Depending on the

manufacturer, this is also referred to as

Bonding.

PIN - by default, the PIN is 0000 for the

telephone base and for most Bluetooth

devices. PIN information must be

exchanged between Bluetooth devices

before they can be used. This is also

known as a Passkey or Passcode.

14

Bluetooth setup

To use a Bluetooth enabled cell phone with

your DS6291/DS6292, you must ﬁrst pair

and connect it with the telephone base. All

DS6291/DS6292 handsets can be used to

make or answer on the cell phone line.

Bluetooth wireless technology operates

within a short range (30 feet). When

you pair a Bluetooth cell phone to the

telephone base, move closer to the

telephone base to maintain sufﬁcient

signal strength. For optimal performance,

keep your cell phone within 15 feet of the

telephone base while using the cell line.

VTech Connect to CellTM

application

If you are using Bluetooth enabled

Android® phones (OS 2.3 or higher), you

can further extend the ﬂexibility of your

telephone system with use of this

free application.

VTech Connect to Cell comprises

Caller ID manager and Alerts manager

that help you integrate your cell phone

with your new DS6291/DS6292.

To learn more

or download this

application via Google

Play® Store, Scan the

QR code on the right, or

go to

http://www.vtechphones.com/app_connect_to_cell.

Android® and Google Play® are registered

trademarks of Google Inc.

Add a Bluetooth enabled cell

phone

Before you begin, make sure that

you have cellular coverage and your

Bluetooth enabled cell phone is not

connected to any other Bluetooth

devices. Refer to your cell phone user's

manual to learn how to search for or

add new Bluetooth devices.

All paired cell phones are shown on the

cell devices list.

Once you have paired and connected a

device with the telephone base, you do

not need to repeat the procedure again

unless you want to replace the existing

paired cell phone with a new one.

To pair and connect a cell phone:

1. Press MENU on the telephone base

in idle mode to enter the main menu.

2. Press CALLER ID / or

PHONEBOOK / to highlight

Bluetooth, and then press SELECT.

3. Press SELECT to choose Add

device.

4. Press SELECT to choose Add

cellular. The screen displays Please

wait... followed by 1. If cell is

connected to BT device, please

disconnect it.

If there are already 4 paired

devices on the device list, the

4th device will be automatically

removed, regardless of whether

the new device pairing is

successful or not.

If there are already 2 active

devices on the device

list with preﬁx D1: or D2:, the

telephone base shows

Cell Phone A is deactivated for

adding a new device.

•

La page charge ...

VTech DS6291-3 Manuel utilisateur

VTech DS6291-3 Manuel utilisateur

dans d''autres langues

Documents connexes

Autres documents