Haier HLP22P Manuel utilisateur

Marque: Haier

Modèle: HLP22P

Catégorie: Machines à laver

Taper: Manuel utilisateur

115 V, 60 Hz

Made in China

Fabriqué en Chine

Hecho en China

Haier America

New York, NY 10018

Printed in China

HLP22P-01

Issued: June-03

IMPORTANT

Do Not Return This Product To The Store

If you have a problem with this product, please contact the "Haier Customer

Satisfaction Center" at 1-877-337-3639.

DATED PROOF OF PURCHASE REQUIRED FOR WARRANTY SERVICE

IMPORTANT

Ne pas renvoyer cet appareil au magasin.

Si vous avez un problème avec cet appareil, veuillez contacter le service à la clientèle

de Haier au 1-877-337-3639.

IL EST OBLIGATOIRE DE FOURNIR UNE PREUVE D'ACHAT DATÉE, LE NUMÉRO DU MODÈLE

ET SON NUMÉRO DE SÉRIE AFIN DE BÉNÉFICIER DE LA COUVERTURE DE LA GARANTIE.

IMPORTANTE

No Devuelva Este Producto al Establecimiento Compra.

Si tiene problemas con este producto, por favor póngase en contacto con el "Centro

Haier de Atención al Cliente" en el 1-877-337-3639.

PARA EL SERVICIO DE GARANTÍA SE REQUIERE PRUEBA DE COMPRA, FECHADA, No. DE

MODELO Y No. DE SERIE

Part # WD-9999-15

What The World Comes Home To

Automatic

Washing Machine

User Manual-

Model #

HLP22P

What The World Comes Home To

Lavarropas

Automático

Lave-Linge

Automatique

Manuel d’utilisation-

Modèle #

Manual de uso-

Modelo #

IMPORTANT SAFETY INSTRUCTIONS

Warning – To reduce the risk of fire, electric shock, or injury

to persons when using your appliance, follow basic

precautions, including the following:

1. Read all instructions before using the appliance.

2. Use this appliance only for its intended purpose as described in this use and

care guide.

3. Use only detergents or softeners as recommended for use in this manual and

keep them out of the reach of children.

4. This appliance must be properly installed in accordance with the installation

instructions before it is used.

5. Never unplug your appliance by pulling on the power cord. Always grasp the

plug firmly and pull straight out from the outlet.

6. Replace immediately any worn power cords, loose plugs and power outlets.

7. Unplug your appliance before cleaning or before making any repairs.

8. If your old appliance is not being used, we recommend that you remove the

door. This will reduce the possibility of danger to children.

9. Do not operate your appliance in the presence of explosive fumes.

10. Do not use this appliance to wash clothes that have been soaked, spotted or

washed in gasoline, dry cleaning solvents or any other explosive or flammable

substances that may ignite and explode.

11. Clothes or rags used to clean flammable or explosive materials should not be

washed in this appliance until all traces of this material have been removed.

12. Do not add or mix any flammable or explosive substances to the wash.

13. Do not try to remove clothes while the tub is moving. Allow it come to a

complete stop before reaching in.

14. The appliance’s loading door must be closed when the tub is spinning.

15. Do not operate your appliance when parts are missing or broken.

16. Do not use this appliance for commercial uses.

17. Do not operate this appliance unless all enclosure panels are properly in place.

18. Do not tamper with controls.

19. To reduce the risk of injury, do not allow children to play in or on the

appliance. Close supervision of children is necessary when the appliance is

used near children.

20. This appliance must be connected to a proper electrical outlet with the correct

electrical supply.

English

21. Proper grounding must be ensured to reduce the risk of shock and fire. DO

NOT CUT OR REMOVE THE GROUNDING PLUG. If you do not have a

three-prong electric receptacle outlet in the wall, have a certified electrician

install the proper receptacle. The wall receptacle MUST be properly grounded.

22. Hydrogen gas may be produced if the water heater has not been used in more

then 2 weeks. This may be explosive under certain circumstances. If this is the

case, before using this appliance turn on all the hot faucets and let the hot

water run for a few minutes. This will let the trapped hydrogen escape. During

this process do not turn on an electric appliance, smoke, light a match/lighter

or use a flame to avoid an accident, as hydrogen gas is flammable and can

explode.

23. Do not repair or replace any part of the appliance or attempt any servicing

unless specifically recommended in the user-repair instructions, which you

understand and have the skill to carry out.

Note: If for any reason this product requires service, we strongly

recommend that a certified technician perform the service.

24. To reduce the risk or electric shock or fire, do not use extension cords or

adapters to connect the unit to electrical power source.

SAVE THESE INSTRUCTIONS

For Future Use

English

DANGER

Risk of child entrapment. Before you throw away your old

appliance, take off the door so that children may

not easily get trapped inside.

Thank you for purchasing our Haier

product. This easy-to-use manual will

guide you in getting the best use of

your washer.

Remember to record the model and

serial number. They are on a label in

back of the washer.

Model number

Serial number

Date of purchase

Staple your receipt to your manual. You will need it to obtain

warranty service.

Table Of Contents

PAGE

SAFETY INSTRUCTIONS ................................................................1-2

UNDERSTANDING YOUR WASHER ................................................4

PARTS AND FEATURES ..................................................................5-6

OPERATING YOUR WASHER ....................................................7-15

UNPACKING AND ACCESSORIES INVENTORY ..........................15

PROPER LOCATION ........................................................................16

INSTALLATION INSTRUCTIONS ..............................................17-19

UNIT DIMENSIONS ........................................................................20

ELECTRICAL CONNECTIONS ..........................................................21

PROPER CARE AND CLEANING ....................................................22

TROUBLESHOOTING GUIDE ....................................................23-25

WARRANTY......................................................................................26

English

Understanding Your Washer

Your automatic washer features an efficient double drive system. This new

technology was developed based on our hand wash system, which replaces the

central agitator with a pulsator to provide more usable space and allow for gentler

cleaning of clothing. The inner washtub and the pulsator at the bottom of the tub

rotate in opposite directions simultaneously to create a powerful yet gentle swirling

motion that lifts and tumbles clothing through a continuous current of water.

The fins on the wall of the inner tub enhance the force of the water flow and prevent

laundry from twisting and knotting. The turning of the pulsator makes the water

spiral in an upward direction around the washtub in a manner that removes soil

and residue from clothes for the ultimate clean. This effective process protects your

clothing from wear and tear and furthermore saves you both time and water.

English

1. Folding Top Lid

2. Control Panel

3. Washer Cabinet

4. Front Leveling Legs

5. Cabinet Handle (located on both

sides of the washer)

6. Pulsator

7. Inner Tub

8. Lint Filter

9. Inner Cover

10. Detergent Dispenser (not shown)

11. Liquid Bleach Inlet

OPERATING INSTRUCTIONS

Parts and Features

English

1. Cold Water Inlet Valve

2. Hot Water Inlet Valve

3. Rear Leveling Legs

4. Drain Hose Connection

(not shown)

5. Power Cord (115V/ 60Hz)

6. Power Cord Holder Clip

English

OPERATING YOUR WASHER

Understanding the Control Panel

Power ON/OFF: (1)

• Press the button once to operate the washer. Press the button once again to turn

the washer "OFF".

Start/Pause: (2)

• Press this button once to start the wash process. Press this button once again to

pause the activity during the wash cycle. Push again to resume the wash cycle.

Note: If the "Start/Pause" button is not pushed when the power button is

activated, the unit will shut off automatically in 5 minutes.

Program Select: (3)

• Select your desired cycle program by pressing the "Program Select" button. There

are 8 options to select from: Normal, Light, Quick, Heavy, Synthetic, Cotton, Wool

and Silk.

Delay Start Button: (4)

• This feature allows you to delay the start of the wash cycle from 2 and 24 hours.

Press the "Delay Start" button to choose the number of hours you would like to

delay the start of the cycle. The time delayed will increase by 1 hour for each time

the button is pressed.

Water Level Selector: (5)

• Press the button to select the proper water level setting. You may select from 1 to

10 water level settings depending on the cycle type and the amount of clothing to

be washed.

WASH

RINSE

SPIN

WASH/RINSE

TEMP

WATER

LEVEL

DELAY START

PROGRAM

START

PAUSE

POWER

ON/OFF

123456789

English

Temperature Select Wash/Rinse: (6)

• You may select the temperature according to fabric type by pressing the "Temp

Select" button. There are three temperature options: Cold/Cold, Warm/Cold and

Hot/Cold.

• Always refer to the label on the garment for the temperature as recommended by

garment manufacturers. See the reference chart below to select the proper

temperature for fabrics.

WASH/RINSE TYPES OF FABRICS

Cold/Cold Non-color fabrics, lingerie,

clothing with light or normal

Soil, and special care fabrics.

Warm/Cold Delicate and colored fabrics.

Hot/Cold Sturdy whites and colored fabrics

such as work or play clothes and

soiled fabrics

Note: When selecting the hot water option for your load, incoming hot

water must not exceed 122˚F/50˚C.

Spin: (7)

• Push this button to select the number of minutes (0-9) in the spin cycle. The

spinning of the drum at the end of the cycle, extracts excess water from clothing

so that they are not as damp when taken for drying. The spin time varies for each

program.

Rinse: (8)

• Press this button to select the number of times (0-4) clothing is rinsed. The machine

sprays fresh cold water to remove soil and odor from the detergent from the

clothes. The rinse time varies for each program.

Wash: (9)

• The wash time can be set from 0-25 minutes by pressing the button. Each press

will increase the wash time by 1 minute.

Digital Display:

• In normal operation, the indicator light displays the remaining wash time in

minutes.

• When the delay start button is pressed, the display will switch from the minutes

remaining in the wash time to number of hours the cycle has been delayed.

English

Function Light Indicator:

• The function display light indicates that the selected feature is ON or that the cycle

is about to begin.

• During the wash cycle, a flashing light indicates the current program.

Note: Refer to the Troubleshooting Guide on page 23-25 for "Error

Code" explanations.

Loading the Washer

• Load each item loosely.

• Separate the white from the colored clothing. Separate heavy fabrics from light

fabrics.

• Carefully check all pockets and cuffs for small items. They can easily slide in to the

tub and cause damage to the tub.

• Pre-treat all stains and heavily soiled areas for best results.

• Do not overload your washer.

• Close the door properly after loading the clothes.

• When loading wet items, keep water level high enough to keep the unit in

balance and to allow clothing to float easily in the water.

English

Proper Use of the Dispenser

The detergent dispenser is located inside the washer at the upper middle part

beneath the washer door. Open the dispenser by pulling it out. You will see that

there are 2 compartments.

Right Compartment: Use for fabric softener.

Left Compartment: Use for laundry detergent.

Note: The detergent will be automatically mixed with the water during the

wash cycle at the proper time.

Proper Use of Fabric Softener:

• Pour the liquid fabric softener into the compartment on the right as recommended

by the manufacturer.

• Do not exceed the level indicated in the compartment to avoid overflowing.

Warning: Never pour fabric softener directly onto clothes as it will stain and spot

the clothing.

Proper Use of Detergent:

• The amount of detergent used depends on the size of the load, the water type

(hard or soft) and whether the clothes are heavily soiled or lightly soiled. Besides

the performance of the washing machine, the quality of the detergent also affects

the washing result.

• For best results, use low sudsing detergents.

Softener Compartment

Detergent Compartment

English

Proper Use of Bleach:

Use only the bleach manufacturer’s chart for the recommended use of liquid bleach.

Dilute the bleach and add it to the water before putting clothes into the washtub.

Note: You cannot use liquid or powder bleach in the detergent or fabric

softener dispenser.

Warning: Be careful not to spill undiluted bleach onto the washer cabinet or onto

clothing. It is a strong chemical that may damage your clothes and the

finish of the washer if not properly diluted.

Lint Filter

• The filter is located inside the washer at the upper part of the drum. A small nylon

bag collects lint and residue from clothes during the wash cycle.

• You must clean the filter after every load for the best results. Pull up the filter to

remove. Clean and slide the filter back to replace.

Note: Do not wash your clothes without the filter in its compartment

inside the tub.

English

Program Select Wash Cycle Options

• To set any function, press the respective function button until the desired level is

reached.

• Total time includes the normal water intake and drain time. Total washing time

may be influenced by the water inlet pressure and the water level needed.

• Spin time is from the time the intermittent spinning starts to the moment it stops

running.

• In the "Quick Cycle", the washing machine will set the complete procedure

automatically.

Cycles Fabric Total

Time

(approx. minutes)

Normal Work and 19 - 25

play clothes,

Household

linens

Light Lightly soiled, 15 - 18

Permanent press

Quick Small loads 6

lightly soiled

under 2 lbs

Heavy Relatively 54

bigger and

thicker clothing

(e.g., jeans)

Synthetic Polyester, Acrylic 41

nylon, etc.

Cotton Cottons 49

Wool Wools 24

Silk Silks 30

English

Normal Cycle:

• When the washer is turned on, this cycle is activated. The wash, rinse, spin,

temperature and water level setting can be adjusted as needed. The adjustments

may affect the washing time.

Light Cycle:

• In this cycle, the wash/rinse temperature and water level can be adjusted. The

wash time is preset at 6 minutes, rinse is set at 1 time, and spin cycle is set at 1

minute.

Quick Cycle:

• Only the wash/rinse temperatures can be adjusted. The water level is preset at

level 3, wash time at 2 minutes, the rinse at 1 time, and spin cycle at 1 minute.

Heavy Cycle:

• If needed, adjust the wash, rinse, spin, temp select and water level for customized

settings.

Synthetic Cycle:

• The wash time is preset at 12 minutes, rinse at 2 times, and spin cycle at 4

minutes. You can adjust the water level and temperature to your needs.

Cotton Cycle:

• The wash is preset at 10 minutes, rinse at 3 times, and spin cycle at 4 minutes.

The water level and temperature can be adjusted to your needs.

Wool Cycle:

• The presets are wash at 3 minutes, rinse at 2 times, and spin cycle at 3 minutes.

The water level and temperature can be adjusted to suit your needs.

Silk Cycle:

• The wash is preset at 5 minutes, rinse at 2 times, and spin at 3 minutes. The water

level and temperature can be adjusted to suit your needs.

End-of-Cycle Signal

The machine will beep at the end of the cycle, indicating that the washing is

complete. The "Wash/Rinse/Spin" indicator lights will still be ON. The washer will

turn OFF automatically in approximately 10 minutes after the completion of the

cycle.

English

Closing the Top Lid

For safety purposes, the top lid must always be closed during the wash process. If

you open the top lid while the wash cycle is in progress, you will observe the

following:

• An alarm will sound.

• The tub will not spin while the lid is open.

• If the unit is in wash mode, it will stop running.

Simply close the top lid and press the start/pause button to resume the cycle.

Steps for the Wash Process

1. Turn the power ON.

2. Fill the detergent/softener dispenser.

3. Select the desired wash program.

Note: If you choose to keep the "Auto Presets" of the program, skip to

step #5. If you choose to change any or all of the preset options,

continue to step #4. There may be some restrictions when choosing

selected options.

4. Manually Selecting Your Options

• When selecting wash cycle options, please refer to the "Program Select Wash

Cycle Options" section on page 12 for details.

• When selecting delay start, please refer to "Delay Start Button" section on

page 7 for details.

• When selecting water level, please refer to " Water Level Selector" section on

page 7 for details.

• When selecting temperature, please refer to "Temperature Select Wash/Rinse"

section on pages 8 for details.

• Once you have selected the proper settings, go to step #5.

5. Load clothes into the washtub.

6. Close the washer doors properly.

7. Press the "Start/Pause" button to begin the wash process.

Note: If the Normal Program is selected, the machine will automatically select the

water level and wash time according to the clothes and weight of the

laundry. The entire procedure is controlled automatically. The pulsator will

not rotate unless the water is filled to the selected water level.

English

Normal Operating Sounds

The following sounds are normally heard during the operation of the washer:

• Tumbling sounds can be heard as heavy wet clothes in the Washer are tossed

around continuously.

• Air rushing noise is the result of the washtub spinning at a very high RPM.

• Clicking sounds are caused by the wash and rinse cycles turning ON and OFF.

Unpacking and Accessories Inventory

Unpacking

1. Remove all packing materials. This includes the foam base and all adhesive tape

holding the washer accessories inside and outside. Slide out and remove the

bottom Styrofoam that is used to protect the washer from shipping damage due

to vibrations and shock.

2. Inspect and remove any remains of packing, tape or printed materials before

using the washer.

Accessories

a) 1 Bottom Panel

b) 8 Screws for the Bottom Plate

c) 2 Water Inlet Hose

d) 1 Drain Hose

e) 1 Drain Hose Clamp

f) 1 Drain Hook (Gooseneck)

g) 4 Washers

h) 1 Inner Plate

i) Quick sink faucet adapter

Check to make sure that the accessories are present and in good condition.

If you find that they are not in good condition or are missing, please contact

our customer service department for assistance. Our Toll-Free number is

1-877-337-3639.

English

Proper Location

General

• Select a suitable location for the washer on a hard even surface away from direct

sunlight and heat sources (e.g., radiators, baseboard heaters, cooking appliances,

etc.)

• Any floor unevenness should be corrected with the leveling legs located on the

bottom corners of the washer.

• The washer must be placed at room temperature. You must not place the washer

where the temperature is at or below freezing.

Storage in Cold Environments

• This appliance must be stored at room temperature.

• If you received this appliance when the outside temperature is below freezing, do

not operate until this appliance has warmed to room temperature.

• Do not install or operate this appliance in an area where room temperature is

below freezing.

English

Installation Instructions

Read carefully and understand all installation instructions before installing this

washing machine. If after completing the process you are still unsure whether the

washing machine has been properly installed, we recommend that you contact a

qualified installer.

Tools and Materials Required

You will need to use the following tools when installing your washer:

Scissors

Phillips Screwdriver

Flathead Screwdriver

Pliers

Wrench

Tape Measure

Gloves

Level

Installing the Bottom Panel

The bottom panel blocks noises to provide you with the quietest performance

possible during the wash cycle operation.

1. First, lay down the washer on its rear side.

2. Place the panel against the bottom of the machine. Align the holes in the panel

with the holes in the washer.

3. Insert the screws through the holes of the panel into the bottom of the washer and

tighten. (8 screws are supplied)

4. Once all screws have been installed and the panel is in place, return the washer

to its standing position.

English

Leveling the Washer

Your washer has 4 leveling legs that are located on the 4 bottom corners. After

properly placing your washer in its final location, you may level the washer.

• Leveling legs can be adjusted by turning them counter-clockwise to raise the

washer and clockwise to lower the washer.

Note: If the machine is slanting more than 2˚ it will not work.

Installing Your Washer

Read the installation instructions carefully before beginning.

1. Connect the hot and cold water inlet hoses to the hot and cold water faucet.

2. Connect the other ends to their respective washer inlets located at the top rear of

the machine. Connect the red tinted hose fitting to the washer and the other end

to the incoming water supply.

3. Install the drain hose to the side of the washer using drain hose clamp. The drain

hose must be placed into a drainpipe or sink at least 1-1/2 inches in diameter.

Use the gooseneck drain hook to hold hose in place. To avoid possible water

back up, the drain hose must reach a height of at least 31-1/2 inches minimum

and 40 inches maximum.

4. Plug in the Washer to a regular 115 Volt / 60 Hz, 15 Amps outlet.

Note: Carefully inspect for any leaks around and back of the machine. If

there is a leak, turn off the unit and unplug it, then check if any

connections are loose. You may need to tighten any loose

connections.

CAUTION: If after completing these steps you are still unsure if unit has been

properly installed, contact a qualified installer. We recommend that the

washer be installed by a certified technician to ensure that it is

properly installed.

Installing Inner Plate

A. Open the top lid of the washing machine.

B. Install the inner plate on the outer tub by aligning the plate shafts to the tub cover

groves.

C. To install, insert on one side first and then snap in on the other side.

Note: Do Not use washer without installing the inner plate.

La page charge ...

Haier HLP22P Manuel utilisateur

Marque: Haier

Modèle: HLP22P

Catégorie: Machines à laver

Taper: Manuel utilisateur

Télécharger le PDF

rapport

dans d''autres langues

English: Haier HLP22P User manual
español: Haier HLP22P Manual de usuario

Documents connexes

Autres documents

Alpina SF-7641 Instructions For Use Manual