Sony KP-FX53M61 Manuel utilisateur

Projection TV

KP-FX53

KP-FX43

4-090-470-22 (2)

Operating Instructions

• Before operating the unit, please read this manual thoroughly and retain

it for future reference.

Mode d’emploi

•Avant de faire fonctionner cet appareil, lisez attentivement le présent

mode d’emploi et conservez-le pour toute référence ultérieure.

• xxxxxxxx xxxxxxxxxxxxxxxx xxxxxxxxxxxx xxxxxxxxxxx xxxxxxxxxxx

xxxxxxx.

• xxxxxxxx xxxxxxxxxxxxxxxx xxxxxxxxxxxx xxxxxxxxxxx xxxxxxxxxxx

xxxxxxx.

M91, M61, M31

GB

FR

CT

CS

PR

AR

Color Rear Projection TV

KP-FX53/FX43

2

3

Using Your New Projection TV

Table of Contents

WARNING

Using Your New Projection TV

Getting Started ............................................................................................. 5

Step 1 Install the projection TV............................................................ 5

Step 2 Connect the antenna .................................................................. 6

Step 3 Insert the batteries into the remote.......................................... 7

Step 4 Setting up your projection TV automatically ........................ 8

Connecting optional components ........................................................... 10

Watching the TV ........................................................................................ 15

The features you will enjoy include:

• “DRC-MF” for viewing higher quality

pictures (page 19)

• “TWIN” for viewing two programs (page

20)

• “PROGRAM INDEX“ for displaying

multiple programs (page 23)

• “PICTURE MODE”/“SOUND MODE”/

“SURROUND” for customizing your

projection TV (pages 18 and 25)

• “WIDE MODE” to view 16:9 pictures

(page 37)

Your projection TV also offers the following

features:

• Initial Setup function for on-screen language

selection, automatic channel presetting and

automatic connvergence adjustment. (page 8)

• Menu language options

— English/Chinese/Arabic (page 42)

• “CHILD LOCK” for locking out specific

channels (page 48)

• “INTELLIGENT VOL” for automatic volume

adjustment (page 39)

• “FINE” tuning feature (page 46)

• Button Joystick on the remote control for

easier operation (page 35)

•

“ECO MODE” to save energy (page 43)

•

“GAME MODE” for video games (page 37)

Advanced Operations

Selecting the picture and sound

modes ...............................................18

Viewing higher quality pictures ......19

Watching two programs at the same

time................................................... 20

Displaying multiple programs ........ 23

Listening with surround sound .......25

Enjoying stereo or bilingual

programs .........................................26

Viewing Teletext................................. 28

Operating optional components......30

Adjusting Your Setup (MENU)

Introducing the menu system ..........33

Changing the “PICTURE” setting ...36

Changing the “SOUND” setting ..... 39

Changing the “MULTI PICTURE”

setting............................................... 41

Changing the “SETUP” setting........42

Additional Information

Troubleshooting .................................49

Self-diagnosis function......................53

Identifying parts and controls .........54

Specifications ...................... Back cover

GB

4

WARNING

To prevent fire or shock hazard, do not expose the projection TV to rain or moisture.

Dangerously high voltages are present inside the projection TV. Do not open the

cabinet. Refer servicing to qualified personnel only.

For general safety:

• Do not expose the projection TV to rain or moisture.

• Do not open the rear cover.

For safe installation:

• Do not block the ventilation openings.

• Do not install the projection TV in hot, humid or excessively dusty places.

• Do not install the projection TV where it may be exposed to mechanical vibrations.

•Avoid operating the projection TV at temperatures below 5°C (41°F).

• If the projection TV is transported directly from a cold to a warm location, or if the room

temperature has changed suddenly, the picture may be blurred or show poor color. This

is because moisture has condensed on the mirror or lenses inside. If this happens, let the

moisture evaporate before using the projection TV.

•To obtain the best picture, do not expose the screen to direct illumination or direct

sunlight. It is recommended to use spot lighting directed down from the ceiling or to

cover the windows that face the screen with opaque drapery. It is desirable to install the

projection TV in a room where the floor and walls are not of reflecting material. If

necessary, cover them with dark carpeting or wall paper.

• Do not install the appliance in a confined space, such as a bookcase or built-in cabinet.

For safe operations:

• Do not operate the projection TV on anything but 110 - 240 V AC, 50/60 Hz.

• Do not operate the projection TV if any liquid or solid object falls in it—have it checked

immediately.

• Do not keep the projection TV plugged in if you are not going to use it for several days.

Even if your TV is turned off, it is still connected to the AC power source (mains) as long

as the power cord is plugged in.

• Do not pull the power cord to disconnect the projection TV. Pull it out by the plug.

• Do not plug in too many appliances to the same power socket. Do not damage the

power cord.

• Do not place any object on the projection TV.

• Install the projection TV on a stable projection TV stand and floor which can support the

projection TV set weight. Ensure that the projection TV stand surface is flat and its area

is larger than the bottom area of the projection TV.

• Do not carry the projection TV holding the screen edges.

Caution

• When using TV games, computers, and similar products with your projection TV, keep

the brightness and contrast functions at low settings. If a fixed (non-moving) pattern is

left on the screen for long periods of time at a high brightness or contrast setting, the

image can be permanently imprinted onto the screen. These types of imprints are not

covered by your warranty.

Cleaning the Screen

•To clean the screen with a cloth, please use a soft cloth lightly moistened with a mild

detergent solution or water. Do not use any type of abrasive pad, alkaline cleaner,

scouring powder or solvent, such as alcohol or benzine. As a safety precaution, unplug

the TV before cleaning it.

• Do not rub, touch, or tap the surface of the screen with sharp or abrasive items, like a

ball point pen or a screw driver. Otherwise, this type or contact may result in a scratched

screen.

5

Using Your New Projection TV

Optimum viewing

area (Horizontal)

KP-FX43

KP-FX53

Getting Started

Step 1

Install the projection TV

For the best picture quality, install the projection TV within the areas below.

Using Your New Projection TV

continued

Optimum viewing area

(Vertical)

KP-FX43

KP-FX53

60°

min. 2.4 m

(8 ft.)

min. 2.4 m

(8 ft.)

60°

20°

min. 1.9 m

(6 ft.)

20°

min. 1.9 m

(6 ft.)

6

Using Your New Projection TV

Getting Started (continued)

: Signal flow

IEC connector

(not supplied)

or

Antenna cable (not supplied)

Rear of

projection TV

Step 2

Connect the antenna

If you wish to connect a VCR, see the “Connecting a VCR” diagram on page 7.

CAUTION

Do not connect the power cord until all other connections are

complete, otherwise, a minimal current leakage through the antenna

and/or other terminals to the ground could occur.

7

Using Your New Projection TV

Y

P

B

/

C

B

P

R

/

C

R

Y

P

B

/

C

B

P

R

/

C

R

L

R

L

R

L

(MONO)

1122 3

G

B

HD

VD

SYNC

R

VIDEO

VIDEO IN

VIDEO OUT

AUDIO

R L

Connecting a VCR

To play a video tape, press t (see page 16).

To video and

audio outputs

To S video

output

Audio/Video cable

(not supplied)

S video cable

(not supplied)

: Signal flow

To

(S video input)

VCR

Antenna cable (not supplied)

To antenna

output

To 8 (antenna)

Rear of

projection TV

To t 1, 2 or 3 (video input)

(yellow)

-L (MONO) (white)

-R (red)

continued

Notes

• If you connect a monaural VCR, connect the yellow plug to (the yellow

jack) and the black plug to -L (MONO) (the white jack).

• If you connect a VCR to the 8 (antenna) terminal, preset the signal

output from the VCR to the program number 0 on the projection TV.

• When both the (S video input) and t 1 (video input) are connected,

the (S video input) is automatically selected. To view the video input

to t 1 (video input), disconnect the S video cable.

Step 3

Insert the batteries into

the remote

Note

• Do not use old batteries or different types of batteries together.

8

Using Your New Projection TV

Step 4

Setting up your projection TV automatically

1

Press ! to turn on the

projection TV.

The “INITIAL SETUP”

menu appears, and you can

select the on-screen

language.

2

Move up or down

to select the desired

language, then press

.

The automatic channel

presetting menu appears.

Getting Started (continued)

ENTER

MENU

PROG

VIDEO

DRC-MF

HD/DVD

A/B

PROG

INDEX

MENU

T

W

I

N

P

R

O

G

+

T

W

I

N

P

R

O

G

–

MENU

!

T

W

I

N

P

R

O

G

+

T

W

I

N

P

R

O

G

–

T

W

I

N

P

R

O

G

+

T

W

I

N

P

R

O

G

–

INITIAL SETUP

START AUTO PROGRAM

NOW?

YES

NO

INITIAL SETUP

LANGUAGE:

ENGLISH

9

Using Your New Projection TV

3

Move up or down to

select “YES”, then press

to preset the channel

automatically.

The screen will indicate

automatic presetting is in

progress.

After channel presetting is

complete, automatic

convergence adjustment

menu appears.

4

Make sure that “YES” is

selected, then press

.

The convergence

adjustment screen

appears, and the

convergence is

automatically adjusted.

The last “INITIAL

SETUP” menu appears.

5

Move up or down to select “NO”, then press .

The “INITIAL SETUP” menu will not appear again the next time you turn on the

projection TV by pressing !.

To allow this menu to appear again, select “YES”, then press .

Notes

• If you want to cancel any setup, move up or down to select NO and

press , or press MENU.

• If your projection TV has preset an unwanted channel or cannot preset a

particular channel, then preset your projection TV manually (see page 45).

• Convergence is also adjusted manually using the menu (see page 44.)

•You can also perform the Digital Quick Focus feature using on the

front panel of the projection TV.

• Sound will mute while the Digital Quick Focus feature is running.

T

W

I

N

P

R

O

G

+

T

W

I

N

P

R

O

G

–

T

W

I

N

P

R

O

G

+

T

W

I

N

P

R

O

G

–

T

W

I

N

P

R

O

G

+

T

W

I

N

P

R

O

G

–

INITIAL SETUP

PROG : 09

TV SYS : AUTO

VHF LOW

INITIAL SETUP

DISPLAY THIS MENU

NEXT TIME?

YES

NO

INITIAL SETUP

START DIGITAL QUICK

FOCUS NOW?

YES

NO

10

Using Your New Projection TV

Connecting optional components

You can connect optional audio/video components, such as a VCR, a DTV (Digital

Television) Receiver, multi disc player, camcorder, video game, or stereo system. To

watch and operate the connected equipment, see pages 16 and 30.

Connecting a camcorder/video game equipment

using the t (video input) jacks

Notes

• When connecting video game equipment, display the “PICTURE” menu

and select “ON” for “GAME MODE” to adjust the picture setting that is

suitable for video games (see page 37).

•You can also connect video equipment to the t 1, 2, or 3 (video input)

jacks at the rear of your projection TV.

• When both the (S video input) and t 4 (video input) are connected,

the (S video input) is automatically selected. To view the video input

to t 4 (video input), disconnect the S video cable.

ENTER

MENU

PROG

RL

4

(MONO)

: Signal flow

To S video

output

Camcorder

Video game

equipment

To video and

audio outputs

To

(S video input)

To t 4

(video input)

or

Audio/Video cable (not supplied)

S video cable (not supplied)

To open the drop-down panel of your

projection TV, push the eight edge of the

panel until you hear a click, then the

panel over will open downwards.

11

Using Your New Projection TV

Connecting audio/video equipment using the T

(monitor output) jacks

Note

• If you select “HD/DVD 1” or “HD/DVD 2” on your projection TV screen,

no sound and no picture will be output from the T (monitor output)

jacks (see page 16).

Y

PB

/

CB

PR

/

CR

Y

PB

/

CB

PR

/

CR

R

L

R

L

R

L

(MONO)

1122 3

G

B

HD

VD

SYNC

R

(yellow)

-L (MONO)

(white)

-R (red)

Rear of projection TV

To

antenna

output

To video

and audio

inputs

or

Audio system

To

audio

inputs

VCR

: Signal flow

To T

(monitor

output)

Antenna cable (not supplied)

Audio cable

(not supplied)

Audio/Video cable (not supplied)

continued

12

Using Your New Projection TV

Y

P

B

/

C

B

P

R

/

C

R

Y

P

B

/

C

B

P

R

/

C

R

L

R

L

1 2

G

B

R

VIDEO

R-AUDIO-L

LINE OUT

Y

COMPONENT VIDEO OUT

S VIDEO OUT

C

B

C

R

Connecting a DVD player to (component video input)

1 Using an audio cable, connect R and L under 1 or 2 (component video input) on

your projection TV to the LINE OUT, AUDIO R and L output connectors on your

DVD player.

2 Using a component video cable, connect Y, P

B/CB, and PR/CR under 1 or 2

(component video input) on your projection TV to the COMPONENT VIDEO OUT

Y, C

B, and CR output connectors on your DVD player.

3Press t or HD/DVD on the remote or t on the projection TV until “HD/DVD 1”

appears on the screen if you connect your DVD player to

1, or “HD/DVD 2” for

connection to

2.

To component

video output

Component video cable

(not supplied)

DVD

player

To -L (white)

-R (red)

To audio

output

Audio cable

(not supplied)

: Signal flow

To 1 or 2

(component video input)

Rear of

projection TV

Connecting optional components (continued)

Notes

• Some DVD player terminals may be labeled differently:

Connect To (on the DVD player)

Y (green) Y

PB/CB (blue) Cb, B-Y or PB

PR/CR (red) Cr, R-Y or PR

• Connect nothing to the HD/VD jacks when connecting a DVD player to

1 or 2 (component video input).

• If you select “HD/DVD 1” or “HD/DVD 2” on your projection TV screen,

no sound and no picture will be output from the T (monitor output)

jacks. This does not indicate a malfunction.

• When receiving a progressive signal through (component video

input), TWIN pictures and PROGRAM INDEX features are not available,

and “DRC-MF” and “GAME MODE” are not selectable.

13

Using Your New Projection TV

continued

R

L

(MONO)

1 2 3

VIDEO

R-AUDIO-L

LINE OUT

Connecting a DVD player to t (video input)

Connect t 1, 2, or 3 (video input) / (audio/video) connectors on your projection

TV to LINE OUT on your DVD player.

To audio/video

output

(yellow)

-L (MONO) (white)

-R (red)

To t 1, 2, or 3

(video input)

: Signal flow

Audio/Video cable

(not supplied)

Notes

• Since the high quality pictures on a DVD disc contain a lot of information,

picture noise may appear. In this case, adjust the sharpness (“SHARP”)

under “ADJUST” in the “PICTURE MODE” menu (see page 38).

•You can also connect a DVD player to (S video input) on the

projection TV.

Rear of

projection TV

DVD

player

14

Using Your New Projection TV

Connecting a DTV (digital television) receiver to

1 or 2 (component video input) jacks

Y

P

B

/

C

B

P

R

/

C

R

Y

P

B

/

C

B

P

R

/

C

R

L

R

L

1 2

G

B

R

Component video cable

(not supplied)

Digital TV

receiver

To -L (white)

-R (red)

To audio

output

Audio cable

(not supplied)

: Signal flow

To 1 or 2

(Component video input)

Rear of

projection TV

To component

video output

Notes

• The projection TV is equipped with the G/B/R/HD/VD inputs. If your

DTV receiver is not equipped with the Y/PB/PR output connectors, use the

G/B/R/HD/VD connectors.

• 1 can be used as the Y/PB/PR inputs.

• 2 can be used as the Y/PB/PR or G/B/R/HD/VD inputs. Connect

nothing to the HD/VD connectors when using the Y/PB/PR inputs.

Tip

• The projection TV accepts the following signal formats:

Total scanning Effective scanning fV (Hz)

line line

1125i 1080i 50/60

750p 720p 50/60

625p 576p 50

625i 576i 50

525p 480p 60

525i 480i 60

Connecting optional components (continued)

15

Using Your New Projection TV

TV

VIDEO

DRC-MF

HD/DVD

123

456

78

0

9

JUMP

PROG

OPTION RESET

A/B

PROG

INDEX

MENU

T

W

I

N

P

R

O

G

+

T

W

I

N

P

R

O

G

–

1

Press ! to turn on the

projection TV.

When the projection TV is in standby mode

(the 1 indicator on the projection TV is lit

red), press !/1 on the remote.

2

Press PROG +/– or the number

buttons to select the TV

channel.

For double digit numbers, press

-, then the number (e.g., for 25,

press -, then 2 and 5).

Note

• When you turn on the projection TV, either the program number or video

mode is displayed for approximately 40 seconds. The ECO MODE (

)

icon will also appear if “ECO MODE “ in the “SETUP” menu is set “ON”

(see page 43).

HD/DVD

Number

buttons

JUMP

PROG

+/–

2 +/–

Watching the TV

This section explains various functions

and operations used while watching the

TV. Most operations can be done using

the remote.

or

1 indicator

continued

ENTER

MENU

PROG

ENTER

MENU

PROG

123

456

78

0

9

16

Using Your New Projection TV

Watching the TV (continued)

To select a TV program quickly

(1) Press and hold PROG +/–.

(2) Release PROG +/– when the desired program number appears.

Note

• When you select a TV program quickly, the picture may be disrupted.

This does not indicate a malfunction.

Additional tasks

To

Turn off temporarily

Turn off completely

Adjust the volume

Mute the sound

Watch the video input

(VCR, camcorder, etc.)

Watch the component input

(DVD, DTV receiver)

Jump back to the previous channel

Display the on-screen information*

* Some picture/sound settings, and either the program number or video

mode are displayed. The on-screen display for the picture/sound settings

disappears after about 3 seconds.

Press

@/1.

The 1 indicator on the projection TV lights up red.

! on the projection TV.

2 +/–.

%.

t (or t on the projection TV) to select “VIDEO 1”,

“VIDEO 2”, “VIDEO 3”, “VIDEO 4”, “HD/DVD 1” or

“HD/DVD 2”.

To return to the TV screen, press a (or t on the

projection TV).

HD/DVD to select “HD/DVD 1” or “HD/DVD 2”.

To return to the TV screen, press a (or t on the

projection TV).

JUMP.

.

17

Using Your New Projection TV

SLEEP TIMER:30M SLEEP TIMER:60M

SLEEP TIMER:OFF SLEEP TIMER:90M

After 30 minutes

No Sleep Timer

After 60 minutes

After 90 minutes

WAKE UP TIMER:10M

WAKE UP TIMER:OFF

WAKE UP TIMER:12H00M

After 10 minutes

No Wake Up Timer After 12 hours

Setting the Wake Up timer

1

Press until the desired

period of time appears.

The Wake Up timer starts

immediately after you

have set it.

2

Select the TV channel or video mode you want to wake up to.

3

Press !/1, or set the Sleep timer if you want the projection TV to turn off

automatically.

The

indicator on the projection TV lights up orange.

To cancel the Wake Up timer

Press until “WAKE UP TIMER: OFF” appears, or press ! on the

projection TV to turn it off.

Note

• If no buttons or controls are pressed for more than two hours after the

projection TV is turned on using the Wake Up timer, the projection TV

automatically goes into standby mode. To resume watching the TV, press

any button on the projection TV or the remote.

Setting the Sleep timer

Press

until the desired

period of time appears.

The Sleep timer starts

immediately after you

have set it.

To cancel the Sleep timer

Press

until “SLEEP TIMER: OFF” appears, or turn the projection

TV off.

18

Advanced Operations

0

JUMP

PROG

OPTION RESET

Advanced Operations

Selecting the picture mode

Press repeatedly until

the desired picture mode

is selected.

Select

“DYNAMIC”

“STANDARD”

“HI-FINE”

“PERSONAL”

To

receive high contrast pictures.

receive normal pictures.

receive higher density pictures with mild contrast.

receive the last adjusted picture setting from the “ADJUST” option in the

“PICTURE” menu (see page 38).

Selecting the sound mode

Press repeatedly until

the desired sound mode is

selected.

Tip

•You can also set the picture and sound modes using the menu (see

“Changing the “PICTURE” setting” on page 36 and “Changing the

“SOUND” setting” on page 39).

Select

“DYNAMIC”

“DRAMA”

“SOFT”

“PERSONAL”

To

listen to dynamic and clear sound that emphasizes both the low and high

tones.

listen to sound that emphasizes voice and high tones.

receive soft sound.

receive the last adjusted sound setting from the “ADJUST” option in the

“SOUND” menu (see page 40).

Selecting the picture

and sound modes

You can select picture and sound modes

and adjust the setting to your preference

in the “PERSONAL” option.

PERSONAL

DYNAMIC

HI-FINE

STANDARD

9

DYNAMIC

9

PERSONAL

9

SOFT

9

DRAMA

19

Advanced Operations

Viewing higher

quality pictures

— “DRC-MF”

The Digital Reality Creation-Multi

Function (DRC-MF) feature allows you to

enjoy higher quality pictures on your

projection TV. You can select “DRC1250” to

watch super real (higher resolution)

pictures, or “DRC100” for moving pictures

or “PROGRESSIVE” for still pictures to

reduce flicker if necessary.

Press DRC-MF repeatedly

until you receive the

desired picture quality.

Tip

• When the broadcast signal is weak, you may see some dots or noise on the

TV screen. To reduce this interference, display the “PICTURE” menu and

select “ADJUST” in “PICTURE MODE”, then adjust “SHARP” to reduce

the sharpness (see page 38).

Note

• The DRC-MF mode is not selectable when using the “PROGRAM INDEX”

feature, or when the “GAME MODE” or “TWIN” mode is turned “ON”.

The mode is not also selectable for HD (high-definition) or progressive

signal.

The DRC-MF logo ( ) and “DRC-MF” are trademarks of

Sony Corporation.

VIDEO

DRC-MF

HD/DVD

123

456

78

0

9

JUMP

A/B

PROG

INDEX

MENU

T

W

I

N

P

R

O

G

+

T

W

I

N

P

R

O

G

–

Select

“DRC1250”

“DRC100”

“PROGRESSIVE”

To

select higher resolution pictures.

reduce flicker on the screen.

reduce jitter of any small areas or scanning lines (e.g., letters or

the edge of objects) on the screen.

DRC-MF

Advanced Operations

DRC-MF: DRC1250 DRC-MF: DRC100

DRC-MF: PROGRESSIVE

DRC-MF

20

Advanced Operations

VIDEO

DRC-MF

HD/DVD

123

456

78

0

9

JUMP

A/B

PROG

INDEX

MENU

T

W

I

N

P

R

O

G

+

T

W

I

N

P

R

O

G

–

Displaying TWIN pictures

Press .

To return to the normal screen

Press .

The left picture is displayed in full screen.

Tip

•You can also display the TWIN pictures using the menu (see “Changing

the MULTI PICTURE setting” on page 41).

•Pressing displays the right picture in full screen (see “Selecting a TV

program using TWIN” on page 22).

Watching two

programs at the

same time

— “TWIN”

With the TWIN pictures feature, you can

display a different TV program beside

the main picture.

10 12

La page charge ...

Sony KP-FX53M61 Manuel utilisateur

Ce manuel convient également à

Sony KP-FX53M61 Manuel utilisateur

dans d''autres langues

Documents connexes

Autres documents