LG WM3885HCCA Le manuel du propriétaire

Lifds Good

WASHt

ACHt

Please read this manual carefully before operating

your washing machine and retain it for future reference.

WM3885H*CA

P/NO: MFL62526827

www.lge.com

INTflODUCTION

IMPORTANT SAFETY INSTRUCTIONS

Basic Safety Precautions ..................................... 4

Grounding Instructions .......................................... 4

Safety Instructions for Installation .......................... 5

Safety Instructions for Use, Care and Cleaning,

and Disposal .......................................................... 6

PARTSAND FEATURES

Special Features..................................................... 7

Key Parts and Components ................................... 8

INSTALLATION INSTRUCTIONS

Choose the Proper Location .................................. 9

Clearances ............................................................. 9

Flooring ................................................................ 10

Installations with Optional Pedestal Base

or Stacking Kit...................................................... 10

Unpacking and Removing Shipping Bolts ........... 11

Connecting the Water Lines ................................. 12

Connecting the Drain Line .................................... 13

Leveling the Washer ............................................. 14

Installation of Non-skid pads (Optional) ............... 14

HOW TO USE

Control Panel Features ........................................ 15

Operating the Washer .......................................... 16

Cycle Guide .......................................................... 17

Sorting wash loads .............................................. 18

Selecting detergent .............................................. 19

About the Dispenser ............................................. 19

Loading the Dispenser ......................................... 20

The color LCD Display .......................................... 21

Steam Cycles ....................................................... 22

COLDWASH TM Cycles .......................................... 23

Cycle Setting Buttons .......................................... 23

Special Function Buttons ..................................... 24

Custom Program .................................................. 25

Secondary Functions ........................................... 25

The Option Buttons ............................................. 26

Special Care Cycles ............................................. 26

CARE AND CLEANING

Regular Cleaning .................................................. 27

Cleaning the Washer ............................................ 28

Maintenance ......................................................... 29

THANKYOU!

Congratulations on your purchase

and welcome to the LG family.

Your new LG Steam Washer TM

combines the most advanced

washing technology with simple

operation and high efficiency.

Follow the operating and care

instructions in this manual and your

washer will provide many years of

reliable service.

WARRANTY ...................................................35

Product Registration Information

Model:

Serial Number:

Date of Purchase:

The model and serial number can be located on the

rating plate on the front of the washer.

Staple your receipt here for your convenience in the

event you need it for warranty coverage.

TROUBLESHOOTING

Normal Sounds You May Hear ............................. 31

Before Calling for Service ..................................... 31

SPECIFICATIONS/OPTIONAL ACCESSORIES

Key Dimensions and Specifications ..................... 34

Optional Accessories ........................................... 34

2

I PO TANTSAFETYINST UCTIONS

READ ALL iNSTRUCTiONS BEFORE USE

_WARNING For yo.r safe_,the information in this manual must be

followed to minimize the risk of fire or e×plosion, electric shock, or to prevent

property damage, personal injury, or loss of life.

Your Safety and the safety of others is very important.

We have provided many important safety messages in this manual and on your appliance. Always read

and obey all safety messages.

This is the safety alert symbol.

This symbol alerts you to potential hazards that can kill or hurt you and others.

All safety messages will follow the safety alert symbol and either the word DANGER or WARNING.

These words mean:

_DANGER: You can be killed or seriously injured if you don't immediately follow instructions.

_WARN|_G: You can be killed or seriously injured ifyou don't follow instructions.

All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of

injury, and tell you what can happen if the instructions are not followed.

5

IMPORTANTSAFETYiNSTRUCTiONS

RSAD ALL iNSTRUCTiONS BEFORS USE

WARNING Foryo.rsafety,theinformationinthisman.alre.stbe

followed to minimize the risk of fire or explosion, electric shock, or to prevent

property damage, personal injury, or loss of life.

BASIC SAFETY PRECAUTIONS

_ILWAR_!_I_I_G: To reduce the risk of fire, electric shock, or personal injury when using this

appliance, follow basic precautions, including the following.

• Before use, the washer must be properly installed as

described in this manual.

Do not wash articles that have been previously

cleaned in, washed in, soaked in, or spotted with

gasoline, dry cleaning solvents, or other flammable or

explosive substances, as they give off vapors that could

ignite or explode.

Do not add gasoline, dry cleaning solvents, or other

flammable or explosive substances to the wash water.

These substances give off vapors that could ignite or

explode.

Under certain conditions, hydrogen gas may be

produced in a hot water system that has not been used

for 2 weeks or more. HYDROGEN GAS IS EXPLOSIVE.

If the hot water system has not been used for such a

period, before using the washer, turn on all hot water

faucets and let the water flow from each for several

minutes. This will release any accumulated hydrogen

gas. As the gas is flammable, do not smoke or use an

open flame during this time.

Do not allow children to play on or in the washer. Close

supervision of children is necessary when the washer is

used near children.

Before the washer is removed from service or

discarded, remove the door to prevent children from

climbing inside.

Do not install or store the washer where it will be

exposed to the weather or freezing temperatures.

Do not tamper with controls.

Do not repair or replace any part of the washer or

attempt any servicing other than as described in this

manual. We strongly recommend that any service be

performed by a qualified individual.

See installation instructions for grounding

requirements.

ALWAYS follow the fabric care instructions

supplied by the garment manufacturer.

Do not place items exposed to cooking oil in your

washer, items contaminated with cooking oils may

contribute to a chemical reaction that could cause a

load to catch fire.

Use fabric softeners or products to eliminate static only

as recommended by the manufacturer.

This washer is not designed for maritime use or for

mobile installations such as in RVs, aircraft, etc.

Turn off the water taps and unplug the washer if the

machine is to be left for an extended period of time,

such as during vacations.

Do not use to dry articles containing foam rubber or

similarly textured rubber-like materials.

Packaging material can be dangerous for children.

There is a risk of suffocatio!! Keep all packaging from

children.

Always check the inside of the washer for foreign

objects before loading laundry. Keep the door closed

when not in use.

GROUNDING INSTRUCTIONS

This appliance must be grounded. In the event of malfunction or breakdown, grounding will reduce

the risk of electric shock by providing a path of least resistance for electric current. This appliance is

equipped with a cord having an equipment-grounding conductor and grounding plug. The plug must

be plugged into an appropriate outlet that is properly installed and grounded in accordance with all

local codes and ordinances.

,WARNING: Improper connection of the equipment-grounding conductor can result in risk

of electric shock. Check with a qualified electrician or servicer ifyou are in doubt as to whether the appli-

ance is properly grounded. Do not modify the plug provided with the appliance. If it does not fit the

outlet, have a proper outlet installed by a qualified electrician. Failure to follow these warnings can cause

serious injury,fire, electrical shock, or death.

4

I PO TANTSAFETYINST UCTIONS

READ ALL iNSTRUCTiONS BSFORE USE

WARNING For yo.r safe ,the information in this manual must be

followed to minimize the risk of fire or explosion, electric shock, or to prevent

property damage, personal injury, or loss of life.

SAFETY iNSTRUCTiONS FOR iNSTALLATiON

_ILWAR_III_I_II_G, • To reduce the risk of fire, electric shock, or personal injury when using this

appliance, follow basic precautions, including the following.

• Refer to INSTALLATION iNSTRUCTIONS for

detailed grounding procedures. Installation

instructions are packed with the washer for installer's

reference. If the washer is moved to a new location,

have it checked and reinstalled by a qualified service

person. Failure to follow this warning can cause

serious injury, fire, electrical shock, or death.

• Do not, under any circumstances cut or remove

the third (ground} prong from the power cord.

Failure to follow this warning can cause serious

injury, fire, electrical shock, or death.

• For personal safety, this appliance must be

properly grounded. Failure to follow this warning

can cause serious injury, fire, electrical shock,

or death.

• The power cord of this appliance is equipped

with a 3-prong (grounding} plug which mates

with a standard 3=prong (grounding} wall outlet

to minimize the possibility of electric shock from this

appliance.

• This washer must be plugged into a 120 VAC,

60 Hz grounded outlet. Failure to follow this warning

can cause serious injury, fire, electrical shock, or

death.

• Have the wall outlet and circuit checked by a

qualified electrician to make sure the outlet is

properly grounded. Failure to follow this warning

can cause serious injury, fire, electrical shock,

or death.

• Where a standard 2=prong wall outlet is

encountered, it is your personal responsibility

and obligation to have it replaced with a properly

grounded 3-prong wall outlet. Failure to follow

this warning can cause serious injury, fire, electrical

shock, or death.

Do not install on carpet. Install washer on a solid

floor. Failure to follow this warning can cause serious

leak damage.

Do not remove ground prong. Do not use an

adapter or extension cord. Plug into a grounded

3=prong outlet. Failure to follow these warnings can

cause serious injury, fire, electrical shock, or death.

• The washer should always be plugged into its

own individual electrical outlet which has a

voltage rating that matches the rating plate. This

provides the best performance and also prevents

overloading house wiring circuits which could cause

a fire hazard from overheated wires.

• Never unplug your washer by pulling on the

power cord. Always grip plug firmly and pull straight

out from the outlet. Failure to follow this warning can

cause serious injury, fire, electrical shock, or death.

• Repair or replace immediately all power cords

that have become frayed or otherwise damaged.

Do not use a cord that shows cracks or abrasion

damage along its length or at either end. Failure

to follow this warning can cause serious injury, fire,

electrical shock, or death.

When installing or moving the washer, be careful

not to pinch, crush, or damage the power cord.

Failure to follow this warning can cause serious

injury, fire, electrical shock, or death.

• The washer must be installed and electrically

grounded by a qualified service person in

accordance with local codes to prevent shock

hazard and assure stability during operation.

The washer is heavy. Two or more people may be

needed to install and move the appliance. Failure

to do so can result in back or other injury.

Store and install the washer where it will not

be exposed to temperatures below freezing or

exposed to outdoor weather conditions. Failure to

follow this warning can cause serious leak damage.

• Do not install the washer in humid spaces to

reduce the risk of electric shock. Failure to follow

this warning can cause serious injury, fire, electrical

shock, or death.

• To reduce the risk of personal injury, adhere to

all industry recommended safety procedures

including the use of long sleeved gloves and

safety glasses. Failure to follow all of the safety

warnings in this manual could result in property

damage, personal injury or death.

5

IMPORTANTSAFETYiNSTRUCTiONS

READ ALL INSTRUCTIONS BEFORE USE

WARNING For yo.r safety,the information in this manual must be

followed to minimize the risk of fire or explosion, electric shock, or to prevent

property damage, personal injury, or loss of life.

SAFETY iNSTRUCTiONS FOR USE, CARE AND CLEANING, AND DISPOSAL

_ILWARNING." To reduce the risk of fire, electric shock, or personal injury when using this

appliance, follow basic precautions, including the following.

• Unplug the washer before cleaning to avoid the

risk of electric shock.

• Never use harsh chemicals, abrasive cleaners,

or solvents to clean the washer. They will

damage the finish.

• Do not put oily or greasy rags or clothing on

top of the washer. These substances give off

vapors that could ignite the materials.

• Do not wash items that are soiled with

vegetable or cooking oil. These items may

contain some oil after laundering. Due to the

remaining oil, the fabric may smoke or catch

fire by itself.

• Disconnect this appliance from the

power supply before attempting any user

maintenance. Turning the controls to the OFF

position does not disconnect this appliance

from the power supply. Failure to follow this

warning can cause serious injury, fire, electrical

shock, or death.

• Do not combine laundry products for use

in one load unless specified on the label.

• Do not mix chlorine bleach with ammonia

or acids such as vinegar. Follow package

directions when using laundry products.

Incorrect usage can produce poisonous gas,

resulting in serious injury or death.

• Do not reach into the washer while parts are

moving. Before loading, unloading, or adding

items, push in the cycle selector knob and

allow the drum to coast to a complete stop

before reaching inside. Failure to follow this

warning can cause serious injury, fire, electrical

shock, or death.

• Do not allow children to play on or in the

washer. Close supervision of children is

necessary when the washer is used near

children. As children grow, teach them the

proper, safe use of all appliances. Failure to

comply with these warnings could result in serious

personal injuries.

• Destroy the carton, plastic bag, and other

packing materials after the washer is

unpacked. Children might use them for play.

Cartons covered with rugs, bedspreads, or

plastic sheets can become airtight chambers.

Failure to comply with these warnings could result

in serious personal injuries.

• Keep laundry products out of children's reach.

To prevent personal injury, observe all warnings

on product labels. Failure to comply with these

warnings could result in serious personal injuries.

• Remove the door to the washing compartment

to avoid the danger of children or small animals

getting trapped inside before your washer is

removed from service or discarded. Failure to do

so can result in serious personal injury or death.

SAVE THll SIE INSTRUCTIONS

6

PA TS ANDFEMU ES

SPECIAL FEATURES

DETERGENT DISPENSER DRAWER

This four-compartment drawer provides separate

dispensers for pre-wash and main wash

detergent, liquid bleach, and liquid fabric softener.

O CONTROL PANEL COLOR LCD DISPLAY

SCREEN

The simple electronic controls are user-friendly.

The color LCD screen shows cycle options and

cycle information and displays status messages

during operation.

EASY-ACCESS LOCKING DOOR

The extra-large door locks during operation and

features a delay to prevent the door from being

opened until the washer interior has cooled and

the water level has lowered.

_) HIGH-EFFICIENCY STEAM CYCLES

During LG's unique high-efficiency STEAM cycles,

the steam nozzle injects fabrics with hot steam to

gently remove tough stains.

ROLLER JETS

The ROLLERJETS system enhances wash

performance while reducing fabric wear.

Integrated jets spray clothes to further improve

washing efficiency.

Q

MAGNETIC DOOR PLUNGER

Safely and conveniently secure the door

slightly ajar with a magnetic door plunger.

This will promote air circulation and allow

the interior of the machine to dry.

To use this feature, after the load has been

removed, do not close the door completely.

When the magnetic door plunger comes into

contact with the metal washer cabinet, it will

secure the door slightly open allowing the

interior of the washer to dry.

INTERIOR DRUM LIGHT

The drum light illuminates the washer interior for

greater visibility when loading and unloading.

The ultra long-life LED bulbs should never need

replacement.

iNVERTER DIRECT-DRIVE MOTOR

The inverter direct-drive motor eliminates the belt

and pulleys found on most washers to provide

improved performance and reliability while

increasing energy efficiency.

Protocol P172

Sanitization Performance of Residential and

Commercial, Family Sized Clothes Washers

7

PARTSA D FEMU ES

KEY PARTS AND COMPONENTS

In addition to the special features and

components outlined in the SpecialFeatures

section, there are several other important

components that are referenced in this manual.

O ULTRA=CAPACITY STAINLESS STEEL DRUM

The ultra-large stainless steel drum offers extreme

durability and is tilted to improve efficiency and

allow easier access for large items.

_) WATER CIRCULATION AND STEAM NOZZLES

The water circulation nozzles spray the water/

detergent solution directly onto garments for

super cleaning performance. During LG's unique

high-efficiency STEAM cycles, the steam nozzle

injects fabrics with hot steam to gently remove

tough stains. Hot and Cold

Water Inlets

0

O

LEVELING FEET

Four leveling feet (two in the front and two in

the back) adjust to improve washer stability on

uneven floors.

O DRAIN ACCESS PANEL

Provides access to the drain line and drain pump

filter.

_{_ SELF CLEANING NOZZLE

The door cleaning nozzle sprays water on the door

to remove the bubble and stain.

It starts to clean the door during the rinsing process.

Drain

Hose

Rear of Washer

8

Included Accessories

Hot and Cold Non-skid pads Caps (4)

Water Hoses (for covering

shipping bolt holes)

Wrench (for removing Tie Strap

shipping bolts and (for securing Elbow Bracket

adjusting and drain hose) (for securing

locking leveling feet) drain hose)

INSTAllATION INST UcTIONS

cHOOSE THE PROPER LOcATiON

WARNiNG

• Washer is heavy! Two or more people

are required when moving and unpacking

the washer. Failure to do so can result in back

or other injury.

= Store and install the washer where it wiil not

be exposed to temperatures below freezing

or exposed to outdoor weather conditions.

Failure to follow this warning can cause serious

injury, fire, electrical shock, or death.

• Properly ground washer to conform with all

governing codes and ordinances. Failure to

follow this warning can cause serious injury, fire,

electrical shock, or death.

To reduce the risk of electric shock, do not

install the washer in humid spaces. Failure to

follow this warning can cause serious injury,fire,

electrical shock, or death.

The base opening must not be obstructed by

carpeting when the washer isinstalled on a

carpeted floor.

• Do not remove ground prong. Do not use

an adapter or extension cord. Plug into a

grounded 3=prong outlet. Failure to follow this

warning can cause serious injury, fire, electrical

shock, or death.

Power Outlet

=The power outlet must be within 60 inches

(1.5 m) of either side of the washer.

The appliance and outlet must be positioned so

that the plug is easily accessible.

Do not overload the outlet with more than one

appliance.

The outlet must be grounded in accordance with

current wiring codes and regulations.

Time-delay fuse or circuit breaker is

recommended.

NOTE: It is the personal responsibility and

obligation of the product owner to have a

proper outlet installed by a qualified electrician.

CLEARANCES

221/2''

(57cm)

(75.6 cm)

51" ,.

_(129.7 cm)

4"

(10 cm)

To ensure sufficient clearance for

water lines and airflow, allow minimum

clearances of at least 1 inch (2.5 cm) at

the sides and 4 inches (10 cm) behind

the unit. Be sure to allow for wall, door,

or floor moldings that may increase the

required clearances.

O

C3

(2.5 cm)

27"

(68.6 cm) (2.5 cm)

Allow at least 24 inches (61.2 cm) in

front of the washer to open the door.

9

INSTALLATIONINST UCTIONS

FLOORING

• To minimize noise and vibration, the washer

MUST be installed on a solidly constructed floor.

See the NOTE below.

Allowable slope under the entire washer is

1° maximum.

Carpeting and soft tile surfaces are not

recommended.

Never install the washer on a platform or weakly

supported structure. Use only an approved

accessory pedestal as described below.

NOTE: Please note that the floor must be strong

and rigid enough to support the weight of the

washer when fully loaded, without flexing or

bouncing. If your floor has too much flex in it,

you may need to reinforce it to make it more

rigid. A floor that is adequate for a top-loading

washer may not be rigid enough for a front-

loading washer, due to the difference in the spin

speed and direction. If the floor is not solid, your

washer may vibrate and you may hear and feel

the vibration throughout your house.

NOTE: Before installing the

washer, make sure the floor is

clean, dry and free of dust, dirt, ,water and oils so the washer feet

can not slide easily. Leveling feet .......................

that can move or slide on the floor can contribute

to excess vibration and noise due to poor contact

with the floor.

NOTE: If a drip pan must

be used, take extra care

to follow the instructions

provided with the drip pan

and make sure the leveling

feet are adjusted for firm and even contact with

the pan. Use of drip pans and failure to properly

level the machine may result in increased vibration

and noise during operation.

INSTALLATIONS WITH

OPTIONAL PEDESTAL BASE OR

STACKING KIT

IMPORTANT." If you are installing your washer

using an optional pedestal base or stacking

kit, please refer to Optional Accessories in this

manual or to the instructions for your pedestal

or stacking kit before proceeding with the

installation.

Required Dimensions for Installation

With Pedestal

m

I_ 293A '' _1

(75.6 cm) (10 cm)

Required Dimensions for Installation

With Stacking Kit

771/2''

(1!)6.8 cm)

27" I-.- 1"

(2.5 cm) (68.6 cm)

(2.5 cm)

10

INSTAllATION INST UcTIONS

UNPACKING AND REMOVING SHiPPiNG BOLTS

When removing the washer from the carton base,

be sure to remove the foam tub support in the

middle of the carton base.

If you must lay the washer down to remove the

base packaging materials, always lay it carefully

on its side. Do NOT lay the washer on its front or

back.

IMPORTANT:To prevent internal damage during

transport, the washer is equipped with 4 shipping

bolts and plastic retainers. These bolts and

retainers MUST be removed before operating the

washer.

• Failure to remove shipping bolts and retainers

may cause severe vibration and noise, which can

lead to permanent damage to the washer. The

cord is secured to the back of the washer with

a shipping bolt to help prevent operation with

shipping bolts in place.

Foam Tub Carton Base

Support

BShipping

Bolts

_J

Starting with the bottom 2 shipping bolts,

use the included wrench to remove the

4 shipping bolts by turning them

counterclockwise.

Hole Ca:

the retainers by turning them slightly

while pulling. Rotate and press the hole caps

into the shipping bolt holes.

NOTE: Save the bolts and retainers for

future use. To prevent damage to internal

components, the shipping bolts and

retainers must be installed when

transporting the washer.

11

INSTALLATIONINST UCTIONS

CONNEcTiNG THE WATER LINES

• iMPORTANT: Use new hoses when installing

the washer. Do NOT reuse old hoses.

• iMPORTANT: Use ONLY the inlet hoses

provided by LG with this laundry product.

Aftermarket hoses are not guaranteed to fit or

function correctly. Other hoses may not tighten

correctly and could cause leaks. Subsequent

damage to product or property will not be

covered under the terms of LG's warranty.

• Water supply pressure must be between

14.5 PSi and 116 PSi (100-800 kPa). If the

water supply pressure is more than 116 PSI,

a pressure reducing valve must be installed.

• Periodically check the hose for cracks, leaks,

and wear, and replace the hose if necessary.

• Make sure that the water lines are not stretched,

pinched, crushed, or kinked.

• The washer should never be installed or stored

in a location subject to freezing temperatures.

Damage to the water lines and internal

mechanisms of the washer can result. If the

washer was exposed to freezing temperatures

prior to installation, allow it to stand at room

temperature for several hours before use.

NOTE: Do not cross-thread the hose fittings.

Attach the hot water line to the red hot water

inlet on the back of the washer. Attach the

cold water line to the blue cold water inlet on

the back of the washer. Tighten the fittings

securely.

Water Hose

(otOwater inlet

washer)

Rubber Seal

J

Water Hose

(to tap)

insert a rubber seal into the threaded

fittings on each hose.

Water Tap

Attach the hot water line to the hot water

tap. Attach the cold water line to the cold

water tap.

Tighten the fittings securely. Open the water

taps fully to check for leaks.

12

INSTAllATION INST UcTIONS

CONNEcTiNG THE DRAIN LiNE

• The drain hose should always be properly

secured. Failure to properly secure the drain

hose can result in flooding and property

damage.

Do not install the end of the drain hose higher

than 96 inches (244.8 cm) above the bottom of

the washer.

The drain must be installed in accordance with

any applicable local codes and regulations.

Make sure that the water lines are not stretched,

pinched, crushed, or kinked.

NOTE: If the drain hose is extended more than

4 inches beyond the end of the elbow bracket,

mold, or microorganisms could spread to

the inside of the washer.

No more than_

4 inches

Elbow

Option 2: Laundry Tub

Elbow

Bracket

Tub

Tie

Strap

Hose

Clip the end of the hose into the elbow bracket.

Hang the end of the drain hose over the side of

the laundry tub. Use tie strap to secure the drain

hose in place.

NOTE: Total height of the hose end should not

exceed 96 inches (244.8 cm) from the bottom of

the washer.

Option 1: Standpipe Option 3: FlOOr Drain

Drain Hose

Hose

Clip the end of the hose into the elbow bracket.

Insert the end of the drain hose into a standpipe.

Use tie strap to secure the drain hose in place.

NOTE: Total height of the hose end should not

exceed 96 inches (244.8 cm) from the bottom of

the washer.

Insert the end of the drain hose into the floor

drain. Secure the hose in place to prevent it

from moving.

15

INSTALLATIONINST UCTIONS

LEVELING THE WASHER

The drum of your new washer spins at very high

speeds, up to 1,400 RPM. To minimize vibration,

noise, and unwanted movement, the floor must

be a perfectly level, solid surface.

NOTE: Adjust the leveling feet only as far as

necessary to level the washer. Extending the

leveling feet more than necessary can cause

the washer to vibrate.

_ Level

Leveling

Feet Feet

f_

Position the washer in the final location,

taking special care to not pinch, strain, or

crush the water and drain lines. Place a level

across the top of the washer.

Raise

Lower ,j

Loosen the Iocknuts on all 4 leveling feet

until you can turn the feet with the included

wrench. Turn clockwise to raise the washer

or counterclockwise to lower it.

• All four leveling feet must rest solidly on the

floor. Rock the washer gently from corner to

corner to make sure that the washer does

not rock.

If you are installing the washer on the optional

pedestal, you must use the leveling feet on

the pedestal to level the washer. The washer's

leveling feet should be fully retracted and locked

into position with the Iocknuts.

NOTE: To make sure that the washer is

properly level, run the washer with a test load:

place approximately 6 pounds of laundry

in the machine. Then press POWER, select

RINSE+SPIN cycle, and then press the START/

PAUSE button. See the following sections for

additional information on cycle selection and

operation.

Verify that the washer does not rock or vibrate

excessively during the spin cycle.

If the washer vibrates or shakes, adjust

the leveling feet until the washer is stable and

retest.

iNSTALLATiON OF NON-SKID

PADS (OPTIONAL)

Some floor surfaces are too slippery to prevent

the washer from moving on the floor during

heavily unbalanced loads. While it is normal for

an occasional load to be out of balance, excess

noise and vibration can result from the washer

moving out of position. Ifthese conditions are

encountered, follow the instructions below for

installation of the non-skid pads. These pads

will help prevent the washer from moving during

heavy out of balance conditions thereby reducing

noise and vibration.

• Non-skid pads

Thissideup

Stickadhesiveside

to floor

movebacking

÷ Place the pads under both front feet.

14

Tighten all 4 lock

nuts securely using

the wrench.

Once the washer is level from side to side and

front to back, tighten all Iocknuts securely.

Make sure that all 4 leveling feet are in firm

contact with the floor.

0 TOUSE

CONTROL PANEL FEATURES

@

Q

O

POWER ON/OFF BUTTON

Press to turn the washer ON. Press again to turn

the washer OFR

NOTE: Pressing the ON/OFF button during a

cycle will cancel that cycle and any load settings

will be lost.

CYCLE SELECTOR KNOB

Turn this knob to select the desired cycle. Once

the desired cycle has been selected, the standard

presets will be shown in the display. These

settings can be adjusted using the cycle setting

buttons anytime before starting the cycle.

START/PAUSE BUTTON

Press this button to START the selected cycle.

If the washer is running, use this button to PAUSE

the cycle without losing the current settings.

NOTE: If you do not press the START/PAUSE

button within 4 minutes of selecting a cycle, the

washer automatically turns off.

STEAM BUTTON

Press the STEAM button to add steam to the

selected cycle for added cleaning power.

NOTE: Steam can be added to only the

following cycles: STEAM FRESHTM,

ALLERGIENF% SANITARY, BRIGHT WHITEST%

BULKY/LARGE, PERM. PRESS, CO-N-ON/

NORMAL, HEAVY DUTY and TOWELS.

O

Q

@

DELAY WASH BUTTON

Press this button to delay the start of the wash

cycle. Each press of the button increases the

delay time by one hour, up to 19 hours.

SPECIAL FUNCTION BUTTONS

The special function buttons allow you to select

additional functions and will light when selected.

Certain buttons also allow you to activate

secondary functions by pressing and holding

the button for 3 seconds.

For detailed information about the individual

functions, please see the following pages.

OPTION BUTTON

Press this button to select additional cycle

options such as WATER PLUS, PRE-WASH and

ENERGY USAGE DISPLAY.

Press the button next to the desired option inthe

display to select. The button will light to show

the option has been selected.

COLOR LCD DISPLAY

The display shows the settings, estimated

time remaining, options, and status messages

for your Steam Washer TM. The light in the

display will remain on through the cycle.

CYCLE SETTING BUTTONS

Use these buttons to select the desired cycle

options for the selected cycle. The current

options are shown in the display. Press the

button for that option to view and select

other settings.

15

HOWTOUSE

16

OPERATING THE WASHER

O

@

COTTON/NORMAL

Q

SORT LAUNDRY AND LOAD THE WASHER

Different fabrics have different care requirements. See the Cycle

Guide on page 17 for details. For best washing, sort clothes into

loads that can be washed with the same wash cycle.

PUT IN DETERGENT

Open the dispenser drawer and add detergent to the main wash

compartment in the dispenser drawer. Add bleach and fabric

softener as desired.

TURN ON THE WASHER

Press the ON/OFF button to turn on the washer. The lights around

the cycle selector knob will illuminate.

SELECT A CYCLE

Turn the cycle selector knob to the desired cycle. The display will

show the preset wash/rinse temperature, spin speed, soil level,

and option settings for that cycle.

SELECT CYCLE SETTING

If you would like to change the settings for that cycle, press the

option button(s) to display additional settings for that option.

Press the button again to cycle through the settings until the

desired setting is shown.

NOTE: To protect your garments, not every wash/rinse

temperature, spin speed, soil level, or option is available with

every cycle.

SELECT CYCLE OPTIONS

Select any additional cycle options, such as STEAM, DELAY

WASH, or COLDWASW mby pressing the button for that option,

or by pressing the OPTION button for additional options.

NOTE: To protect your garments, not every wash/rinse

temperature, spin speed, soil level, or option is available with

every cycle.

BEGIN CYCLE

Press the START/PAUSE button to begin the cycle. To pause the

cycle at any time, press START/PAUSE.

NOTE: If the temperature in the washer is too high, the door

cannot be unlocked until the washer has cooled. If the water level

is too high, select the Drain & Spin cycle (see the page 23 for

details) to drain excess water. Do not try to force the door open.

CHECK CYCLE TIME

The door will latch, the display will change, and the washer will

calculate the estimated time remaining. Once the washer has

calculated the estimated total cycle time, the washer will start.

NOTE: Washing time can be reduced significantly for small

or lightly soiled loads by selecting the Speed Wash cycle and

setting the Soil Level button to Light.

NOTE: The cycle time displayed may appear much longer

than that of a top loading washer. The displayed time is for the

complete cycle, rather than just the agitation portion of the cycle,

as is typically shown on a top-loading washer.

0 TOUSE

CYCLE GUIDE

The cycle guide below shows the options and recommended fabric types for each cycle.

@=

_TEAM

Dressshirts, blouses

FRESW"

SANITARY

i Heavilysoiled

underwear,work

i clothes,diapers,etc.

BULKY/ i Largeitemssuchas

LARGE blanketsandcomforters

i Dressshirts/pants,

PERM, wrinkle-free clothing,

PRESS poly/cottonblend

i clothing,tablecloths

COTTON/ Cotton,linen,towels,

NORMAL [ shirts, sheets,jeans,

[ mixedloads

ALLEI_GIENET"

[ Cotton,underwear,

i pillow covers,

i bedsheets,babywear

HEAVY HeavysoiledCotton

DUTY Fabrics

TOWELS Towels

HANDWASH/ Items labeled

WOOL_ "hand-washable"

DELICATES

Dressshirts/blouses,

nylons,sheer or lacy

garments

SPEED Lightlysoiled clothing

WASH and small loads

RINSE+ iRinseandSpin

SPIN

BRIGHT White Fabrics

WHITEST"

i Thiscycleis designedto

TUBCLEAN+removea mildewy

i or mustysmell.

ExtraHot/Cold

Warm/Cold

Warm/Warm

Hot/Cold

Cold/Cold

Warm/Cold

Warm/Warm

Hot/Cold

Cold/Cold

Warm/Cold

Hot/Cold

Cold/Cold

Warm/Cold

Warm/Warm

Hot/Cold

Cold/Cold

Warm/Cold

Warm/Warm

Hot/Cold

Cold/Cold

Warm/Cold

Warm/Warm

Cold/Cold

Warm/Cold

Warm/Warm

Hot/Cold

Cold/Cold

Warm/Cold

Warm/warm

Cold/Cold

Hot/Cold

Cold/Cold

Warm/Cold

Warm/Warm

High

ExtraHigh

NoSpin

Low

Medium

Low

Medium

NoSpin

Medium

High

NoSpin

Low

High

ExtraHigh

NoSpin

Low

Medium

High

ExtraHigh

NoSpin

Low

Medium

ExtraHigh

NoSpin

Low

Medium

High

ExtraHigh

NoSpin

Low

Medium

High

Low

NoSpin

Medium

NoSpin

Low

Extra High

NoSpin

Low

Medium

High

ExtraHigh

NoSpin

Low

Medium

High

ExtraHigh

NoSpin

Low

Medium

Available option

Normal

Heavy @ @ @ @ _ @

Light

Normal

Heavy _ @ @ @ @ @ @

Light

Normal

Heavy _ @ @ @ @ @ @

Light

Normal

Heavy @ @ @ @ _ @ @

Light

Heavy

Light

Normal

Heavy

Light

Normal

Light

Normal

Heavy

Light

Normal

Heavy

@

Normal

Heavy

Light

NOTE: To protect your garments, not every wash/rinse temperature, spin speed, soil level,

or option is available with every cycle.

x

@

flOWTO USE

SORTING WASH LOADS

FaDri¢ Care Labels

Most articles of clothing feature fabric care labels

that include instructions for proper care.

Fabric Care Labels

Machine_V-f

cycle ,ormalPerm,a_entpress/ _/e

wrinkle resistant

Do notwash Donotwring

Handwash

Water 00 ® ®® ®

temperature Hot Warm Cold/c001

Bleac,\

symbols Any bleach Onlynon-chlorinebleach Do not bleach

(whenneeded) (whenneeded)

• Large items should not be more than half of the

total wash load.

The washer can be fully loaded, but the drum

should not be tightly packed with items. The

door of the washer should close easily.

To prevent an out-of-balance load, do not wash

single items. Add one or two similar items to

the load. Large, bulky items, such as a blanket,

comforter, or bedspread should be washed

individually.

Do not wash or spin waterproof clothes.

When unloading the washer, check under the

door seal for small items.

NOTE: The front loading washer rotates the wet

laundry to wash it with less water. If you do not

see the water during washing, it is not a problem

because the laundry is sufficiently wet.

Grouping Similar Items

For best results, sort clothes into loads that can

be washed with the same wash cycle.

Different fabrics have different care requirements.

Always wash dark colors separately from light

colors and whites to prevent discoloration. If

possible, do not wash heavily soiled items with

lightly soiled ones. The chart below shows

recommended groupings.

Loading the washer

• Check all pockets to make sure that they are

empty, kems such as clips, matches, pens,

coins, and keys can damage both your washer

and your clothes.

• Close zippers, hooks, and drawstrings to

prevent these items from snagging or tangling

on other clothes.

• Pre-treat heavily stained areas for best results.

Combine large and small items in a load. Load

large items first.

18

0 TOUSE

SELECTING DETERGENT

ABOUT THE DISPENSER

IMPORTANT: Your Steam Washer TM is

designed for use with only High-Efficiency

(HE) detergents. HE detergents are formulated

specifically for front-load washers and contain

suds-reducing agents. Always look for the HE

symbol when purchasing detergent.

HE detergents produce fewer suds, dissolve

more efficiently to improve washing and rinsing

performance, and help to keep the interior of your

washer clean.

Using a regular detergent may cause excessive

sudsing and unsatisfactory performance.

IMPORTANT: Do not place or store laundry

products, such as detergent, bleach, or liquid

fabric softener, on top of your washer or dryer.

Wipe up any spills immediately. These products

can damage the finish and controls.

Designed specially to use only

HE (High-Efficiency) detergent

The automatic dispenser consists of four

compartments which hold:

• Liquid chlorine bleach.

• Liquid fabric softener.

Liquid or powdered detergent for pre-wash.

Liquid or powdered detergent and color-safe

bleach for main wash.

All laundry products can be added at once in

their respective dispenser compartments. They

will be dispensed at the appropriate time for the

most effective cleaning.

After adding the laundry products to the

dispenser, close the dispenser drawer.

To add detergent, bleach, and fabric softener to

the automatic dispenser:

0 Open the dispenser

drawer.

O Load the into thelaundry products

appropriate compartments.

Slowly close the dispenser drawer to

avoid early dispensing of the laundry

products.

NOTE: It is normal for a small amount of water to

remain in the dispenser compartments at the end

of the cycle.

Liquid Chlorine

Bleach

Compartment

_J\

Liquid Fabric

Softener

Compartment

Insert

Liquid

Detergent

Main Wash Detergent

Compartment

JPre-wash

ent

Compartment

19

HOWTOUSE

LOADING THE DISPENSER

Pre-wash Detergent Compartment

Add liquid or powdered detergent to this

compartment when using the pre-wash option.

Always use HE (High-Efficiency) detergent with

your washing machine.

• The amount of detergent added for the pre-wash

option is 1/2the amount recommended for the

main wash cycle. For example, if the main wash

cycle requires one measure of detergent, add

1½measure for the pre-wash option.

NOTE: If liquid detergent is to be used for the

main wash when using the pre-wash option, the

liquid detergent cup accessory must be used

in main wash dispenser to prevent the main

wash liquid detergent from being dispensed

immediately.

Main wash Detergent Compartment

This compartment holds laundry detergent

for the main wash cycle, which is added to

the load at the beginning of the cycle. Always

use HE (High-Efficiency) detergent with your

washing machine.

Never exceed the manufacturer's

recommendations when adding detergent.

Using too much detergent can result in

detergent buildup in clothing and the washer.

Either powdered or liquid detergent may be used.

• When using liquid detergent, make sure the

liquid detergent cup and insert are in place.

Do not exceed the maximum fill line.

• When using powdered detergent, remove

the insert and liquid detergent cup from the

compartment. Powdered detergent will not

dispense with the liquid detergent cup and

insert in place.

NOTE: Liquid or powdered color-safe bleach

may be added to the main wash compartment

with detergent of the same type.

Designed specially to use only

HE (High-Efl:iciencv) detergent

Liquid Chlorine

Bleach

Compartment "

Main Wash

Detergent

Compartment

ii_i ii iii

! 'F•

_J

/ Liquid Fabric

Softener

Compartment

/ Pre-wash

Detergent

Compartment

Liquid Bleach Compartment

This compartment holds liquid chlorine bleach,

which will be dispensed automatically at the

proper time during the wash cycle.

• Do not add powdered or liquid color-safe bleach

to this compartment.

• Always follow the manufacturer's

recommendations when adding bleach. Do not

exceed the maximum fill line. Using too much

bleach can damage fabrics.

• Never pour undiluted liquid chlorine bleach

directly onto the load or into the drum. Fabric

damage can occur.

Fabric Softener Compartment

This compartment holds liquid fabric softener,

which will be automatically dispensed during the

final rinse cycle.

• Always follow the manufacturer's

recommendations when adding fabric softener.

Do not exceed the maximum fill line. Using

too much fabric softener may result in stained

clothes.

• Dilute concentrated fabric softeners with warm

water. Do not exceed the maximum fill line.

• Never pour fabric softener directly onto the load

or into the drum.

2O

La page charge ...

LG WM3885HCCA Le manuel du propriétaire

Ce manuel convient également à

LG WM3885HCCA Le manuel du propriétaire

dans d''autres langues

Documents connexes

Autres documents