MTI TC Series Cabinets Le manuel du propriétaire
- Taper
- Le manuel du propriétaire
User Manual
U.S. & Canada (888) 520-4998
International (801) 875-4998
www.mti.net
TC Series Cabinets
Strength in patient care.™
THIS PAGE IS INTENTIONALLY BLANK.
Table of Contents iii
APPLICABLE MODEL(S) ..................................................................................................................................................................................................................................................................................... IV
REVISION HISTORY TABLE ........................................................................................................................................................................................................................................................................... IV
GENERAL INFORMATION .....................................................................................................................................................................................................................................................................................
Purpose of this Manual .........................................................................................................................................................................................................................................................................1
Intended Use ......................................................................................................................................................................................................................................................................................................... 1
Symbols and Warnings..........................................................................................................................................................................................................................................................................2
Symboles et Avertissements .........................................................................................................................................................................................................................................................2
Safety Instructions .......................................................................................................................................................................................................................................................................................3
Electrical Requirements .......................................................................................................................................................................................................................................................................3
Contraindications ..........................................................................................................................................................................................................................................................................................4
Transportation and Storage Conditions .......................................................................................................................................................................................................................4
Disposal of Equipment .........................................................................................................................................................................................................................................................................4
EQUIPMENT FEATURES ........................................................................................................................................................................................................................................................................................
INSTALLATION .....................................................................................................................................................................................................................................................................................................................
Required Tools ....................................................................................................................................................................................................................................................................................................7
Explanation of Instructions .............................................................................................................................................................................................................................................................7
Unpacking & Set-up ................................................................................................................................................................................................................................................................................8
OPERATION ............................................................................................................................................................................................................................................................................................................................
Operating Conditions ..............................................................................................................................................................................................................................................................................9
Controls ...................................................................................................................................................................................................................................................................................................................... 9
Electrical Distribution Box ..............................................................................................................................................................................................................................................................10
Drawer Slides ....................................................................................................................................................................................................................................................................................................10
Pressure Hose ....................................................................................................................................................................................................................................................................................................11
Vacuum Hose ......................................................................................................................................................................................................................................................................................................11
Lift-Up Shelf ......................................................................................................................................................................................................................................................................................................11
ACCESSORIES INSTALLATION .................................................................................................................................................................................................................................................................
Cabinet Foot Control............................................................................................................................................................................................................................................................................. 12
Glove and Tissue Dispensers .................................................................................................................................................................................................................................................... 12
Vacuum Pressure Evacuation System ...........................................................................................................................................................................................................................13
LIST OF ACCESSORIES ......................................................................................................................................................................................................................................................................................
MAINTENANCE .................................................................................................................................................................................................................................................................................................................
Cleaning and Disinfection ..............................................................................................................................................................................................................................................................16
Preventative Maintenance ...............................................................................................................................................................................................................................................................17
Calls for Service ............................................................................................................................................................................................................................................................................................. 17
LIMITED WARRANTY ...............................................................................................................................................................................................................................................................................................
TROUBLESHOOTING GUIDE ......................................................................................................................................................................................................................................................................
SPECIFICATIONS ...........................................................................................................................................................................................................................................................................................................
iv User Manual | MTI TC Series Cabinets
APPLICABLE MODEL(S)
This manual is for the following part numbers and serial numbers:
PART NUMBER DESCRIPTION EFFECTIVE S/N
TC100AS-L TC100 Mobile Cabinet, 33.5”h x 24”w x 21”d, LH All - Current
TC100AS-R TC100 Mobile Cabinet, 33.5”h x 24”w x 21”d, RH All - Current
TC100AT-L TC100 Mobile Cabinet, 33.5”h x 24”w x 18”d, LH All - Current
TC100AT-R TC100 Mobile Cabinet, 33.5”h x 24”w x 18”d, RH All - Current
TC100BS-L TC100 Mobile Cabinet, 41”h x 24”w x 21”d, LH All - Current
TC100BS-R TC100 Mobile Cabinet, 41”h x 24”w x 21”d, RH All - Current
TC100BT-L TC100 Mobile Cabinet, 41”h x 24”w x 18”d, LH All - Current
TC100BT-R TC100 Mobile Cabinet, 41”h x 24”w x 18”d, RH All - Current
TC100CS-L TC100 Mobile Cabinet, 33.5”h x 34.5”w x 21”d, LH All - Current
TC100CS-R TC100 Mobile Cabinet, 33.5”h x 34.5”w x 21”d, RH All - Current
TC100CT-L TC100 Mobile Cabinet, 33.5”h x 34.5”w x 18”d, LH All - Current
TC100CT-R TC100 Mobile Cabinet, 33.5”h x 34.5”w x 18”d, RH All - Current
TC100DS-L TC100 Mobile Cabinet, 41”h x 34.5”w x 21”d, LH All - Current
TC100DS-R TC100 Mobile Cabinet, 41”h x 34.5”w x 21”d, RH All - Current
TC100DT-L TC100 Mobile Cabinet, 41”h x 34.5”w x 18”d, LH All - Current
TC100DT-R TC100 Mobile Cabinet, 41”h x 34.5”w x 18”d, RH All - Current
TC75AS-L TC75 Mobile Cabinet, 33.5”h x 24”w x 21”d, LH All - Current
TC75AS-R TC75 Mobile Cabinet, 33.5”h x 24”w x 21”d, RH All - Current
TC75AT-L TC75 Mobile Cabinet, 33.5”h x 24”w x 18”d, LH All - Current
TC75AT-R TC75 Mobile Cabinet, 33.5”h x 24”w x 18”d, RH All - Current
REVISION HISTORY TABLE
DATE REVISION CO#/ECO# DETAILS
ORG Initial Release
A
2/3/2017 B CO-0070/EC-0285 Updated manual to new format, updated information regarding
location of pumps, valve configurations, & suction handles
7/5/2017 C CO-0139 Corrected BOM, Added set-up instructions about the 230V
option
GENERAL INFORMATION
Purpose of this Manual
This manual covers the safety, installation, instructions for use, and maintenance
of this equipment. It is intended that it be used by the service professional
installing the equipment and by the medical professionals who have been trained
to use it. No repair information is included with this manual, because no operator
repairs are intended.
Intended Use
This equipment is intended to be used as a cabinet for general examinations and
procedures performed by medical professionals.
PRODUCT INFORMATION
Date of Purchase:
Model Number:
Serial Number:
(the serial number label is located on the rear of the cabinet)
User Manual
MTI TC Series Cabinets
2 User Manual | MTI TC Series Cabinets
Symbols and Warnings
This manual contains Notices, Cautions, and Warnings,
which are meant to call attention to particular parts
or sections of this manual. Since safety is our first
concern, this manual should be read by all personnel
who will be operating this medical equipment.
Symboles et Avertissements
Ce manuel contient des avis, des précautions et
des avertissements qui sont destinés à attirer
l’attention sur des pièces ou des sections de
ce manuel particulier. Parce que la sécurité est
notre première préoccupation, ce manuel doit
être lu par tout le personnel qui sera d’utiliser
cet équipement médical.
WARNINGS/AVERTISSEMENTS
Are used to call attention to a condition, practice, or
procedure which could cause personal injury if not
followed correctly. Please become familiar with all
warnings and observe them at all times.
Sont utilisés pour attirer l’attention sur une condition,
pratique ou procédure qui pourrait causer des blessures
s’il n’est pas suivi correctement. S’il vous plaît se
familiariser avec tous les avertissements et les observer
à tout moment.
CAUTIONS/PRECAUTIONS
Are used to call attention to a condition, practice, or
procedure which could cause product damage if not
used correctly.
Sont utilisés pour attirer l’attention sur une condition,
pratique ou procédure qui pourrait causer des
dommages au produit s’il n’est pas utilisé correctement.
NOTICES/AVIS
Are used to call attention to helpful information
regarding a condition, practice, or procedure.
Sont utilisés pour attirer l’attention sur des informations
utiles concernant une condition, pratique ou de
procédure.
Class 1, Type B, Medical Equipment
Proper shipping orientation for the product
Orientation d’embarquement correct pour
le produit
Product is fragile; be careful in handling
Le produit est fragile. Soyez prudent lors
de la manipulation
Protective earth ground
Terre électrique de protection
Alternating current
Le courant alternatif
Product must be kept dry
Le produit doit rester sèche
Upper and lower limits of temperature
Limites haute et basse de la température
2
Maximum stacking height of palletized
units.
Hauteur maximale de la pile d’unités sur
palettes.
Indicates the presence of a dangerous
voltage/shock hazard
Indique le présence de voltage
dangereux/ de choc
Follow instructions for use
Suivez les instructions pour l’utilisation
Consult operating instructions
Consultez les instructions d’utilisation
Manufacturer of product
Fabricant de produits
Date on which the product was
manufactured
Date de fabrication
Identifies the manufacturer’s serial number
Identifie le numéro de série du fabricant
User Manual | MTI TC Series Cabinets 3
Upper and lower limits of relative humidity
Limites haute et basse de humidité relative.
Upper and lower limits of atmospheric
pressure
Limites haute et basse de la pression
atmosphérique
Location of fuses
Emplacement de fusibles
(WEEE) Waste of Electrical and Electronic
Equipment
Déchets d’équipements électriques et
électroniques
ETL listing mark
Marque ETL Listé
UL listing mark
Marque UL Listé
European Conformity mark
Marque Conformité Européenne
Connection point for the neutral conductor
Point de connexion pour le conducteur
neutre
Live conductor
Conducteur sous tension
Hospital Grade (green dot)
De qualité hôpital (point vert)
Safety Instructions
WARNING/AVERTISSEMENT
Read this manual before installation and use.
Lisez ce manuel avant l’installation et l’utilisation.
WARNING/AVERTISSEMENT
No modification of this equipment is allowed.
Aucune modification de cet équipement est autorisé.
WARNING/AVERTISSEMENT
Do not operate equipment in the presence of
flammable anesthetics.
Ne pas faire fonctionner l’équipement en présence
d’anesthésiques inflammables.
WARNING/AVERTISSEMENT
This product contains chemicals known to the State of
California to cause cancer and/or birth defects or other
reproductive harm. See http://www.mti.net/FAQs.aspx for
details on California Proposition 65.
Ce produit contient des produits chimiques reconnus
par l’État de Californie pour causer le cancer et / ou
des anomalies congénitales ou d’autres problèmes de
reproduction. Voir http://www.mti.net/FAQs.aspx pour
plus de détails sur la California Proposition 65.
Electrical Requirements
WARNING/AVERTISSEMENT
To avoid risk of electrical shock, this equipment must be
connected to a supply mains with protective earth.
Pour éviter tout risque de choc électrique, cet
équipement doit être branché sur une prise électrique
avec la terre électrique de protection.
WARNING/AVERTISSEMENT
Grounding reliability can only be achieved when the
equipment is connected to an equivalent receptacle
marked “Hospital Only” or “Hospital Grade”.
Mise à la terre fiabilité ne peut être atteint lorsque
l’équipement est connecté à un réceptacle équivalent
marqué “Hôpital Uniquement“ ou “de Qualité Hôpital”.
WARNING/AVERTISSEMENT
Connecting electrical equipment to a multiple socket-
outlet eectively leads to creating a medical electronic
4 User Manual | MTI TC Series Cabinets
system and can result in a reduced level of safety.
Connexion d’un équipement électrique à une prise
de courant multiple crée un système électronique
médicale, et peut entraîner une baisse du niveau de
sécurité.
WARNING/AVERTISSEMENT
Equipment must be positioned in normal use such that
the power cords can be easily accessed to unplug.
L’équipement doit être positionné en utilisation normale
telle que les cordons d’alimentation peuvent être
facilement accessibles à débrancher.
WARNING/AVERTISSEMENT
Equipment must be connected to an appropriate power
source when loss of power source would result in an
unacceptable risk.
L’équipement doit être relié à une source d’alimentation
appropriée en cas de perte de la source d’alimentation
entraînerait un risque inacceptable.
WARNING/AVERTISSEMENT
Do not use a two-three plug adapter to plug the
equipment into a two conductor outlet, as grounding
reliability is not maintained.
Ne pas utiliser un adaptateur non de prise de terre pour
brancher l’équipement sur une prise à deux conducteurs,
la fiabilité de la terre n’est pas maintenue.
NOTICE/AVIS
Removing the power supply cord at the equipment
input or wall receptacle will simultaneously isolate both
poles of the power supply.
Retrait du cordon d’alimentation à l’équipement ou à la
prise murale se isoler simultanément les deux pôles de
l’alimentation.
Contraindications
None.
Transportation and Storage Conditions
Ambient
Temperature
+10°C to +40°C
(+50°F to +104°F)
Relative
Humidity
30% to 75%
(non-condensing)
Atmospheric
Pressure
700hPa to 1060hPa
(0.69atm to 1.05atm)
Disposal of Equipment
At the end of product life, the equipment, accessories,
and other consumable goods may have become
contaminated due to normal medical use. Consult
local codes and ordinances for proper disposal of
equipment, accessories and other consumable goods.
User Manual | MTI TC Series Cabinets 5
EQUIPMENT FEATURES
Description of TC100 Series Cabinets
TC100 Series Cabinets come in 8 basic sizes with each size having a left-hand or right-hand dexterity. The left hand
dexterity places the instrument handles and hoses on the left side of the cabinet as you are facing it. The right hand
dexterity places the instrument handles and hoses on the right side of the cabinet as you are facing it. The A-size
cabinets are 33.5” tall by 24” wide in standard depth (21”) or slim depth (18”). The B-size cabinets are 41” tall by 24”
wide in standard depth (21”) or slim depth (18”). The C-size cabinets are 33.5” tall by 34.5” wide in standard depth
(21”) or slim depth (18”). The D-size cabinets are 41” tall x 34.5” wide in standard depth (21”) or slim depth (18”). Each
cabinet has configurable options including: height of the backwall (4” or 15”), laminate or stainless steel cabinet,
color of drawers and countertop, choice of 1 of 2 vacuum pumps or central vacuum, and a pressure pump or central
pressure. Other accessories include: LED light sources, instrument heads, instrument charger and handles, glassware
and canisters, drawer locks, mirror warmers, glove and tissue dispensers, medicine lock boxes, and a mirror warming
drawer. Additional customization is also available.
TC SERIES CABINET
electrical
distribution box
vacuum pump
pressure hose & tip
suction hose & tip
vacuum canister
pressure pump
filter
filter
Top Interior View
vacuum to canister hose
storage compartment
slim depth cabinet
standard depth cabinet
4” x 5”
stainless steel canister
3” x 6”
stainless steel canister powder blower
atomizer
instrument charger*
Left Hand
dexterity
Right Hand
dexterity
adjustable shelf
TC100A
stainless steel
small bottle shelf
15” Backwall
4-cavity drawer insert
3-cavity drawer insert
Right Hand
dexterity
Left Hand
dexterity
trash drop
solid surface
bottle/canister tower
4” Backwall
*Other charger models and mounting locations available
canister door
casters
vacuum hose hanger
cabinet base
counter top
drawers
drawer
drawer
side panels pulls (handles)
TC100B
TC100C
TC100D
4” x 3” stainless steel canister
3” x 2.5” stainless steel canister
6 User Manual | MTI TC Series Cabinets
Description of TC75 Series Cabinets
TC75 Series Cabinets come in 2 basic sizes with each size having a left-hand or right-hand dexterity. The left hand
dexterity places the instrument handles and hoses on the left side of the cabinet as you are facing it. The right
hand dexterity places the instrucment handles and hoses on the right side of the cabinet as you are facing it. The
TC75 cabinets are 33.5” tall by 24” wide in standard depth (21”) or slim depth (18”). Each cabinet has configurable
options including: height of the backwall (4” or 15”), a choice of 1 of 2 vacuum pumps, and a pressure pumps. Other
accessories include: instrument heads, instrument charger and handles, and glassware and canisters.
TC SERIES CABINET
4-cavity drawer insert
3-cavity drawer insert
control panel
counter top
4” Backwall
standard depth cabinet
slim depth cabinet
counter top
casters
Right Hand
dexterity
Left Hand
dexterity
electrical distribution box
vacuum pump
pressure hose & tip
suction hose & tip vacuum canister
pressure pump
filter
filter
Top Interior View
vacuum to canister hose
User Manual | MTI TC Series Cabinets 7
Required Tools
Wire cutters Utility Knife Phillips
Screwdriver
Explanation of Instructions
Instructions have steps which are designated by a number. Each step may also have sub-steps designated by a letter.
For example, an instruction to operate a feature may have 4 steps (1-4) and each of those steps may have sub-steps
(A-B) to be performed before moving onto the next step.
INSTALLATION
WARNING/AVERTISSEMENT
This equipment is heavy. Get help to remove it from
the shipping pallet. Use proper lifting procedures when
lifting to avoid serious back injury.
Cet équipement est lourd. Obtenir de l’aide pour le
retirer de la palette d’expédition. Utilisez les procédures
propre de levage pour le soulever pour éviter grave
blessure au dos.
CAUTION/PRÉCAUTION
To move equipment, lift only from the equipment’s main
structure.
Pour déplacer l’équipement, soulevez seulement de la
structure principale de l’équipement.
NOTICE/AVIS
Inspect the shipping boxes for visible damage. Record
on bill of lading, photograph, and report any damage
to the carrier immediately. Request an inspection by the
carrier if any concealed damage is noted.
Inspectez les boîtes d’expédition pour les dommages
visibles. Fiche sur le connaissement, prendre une
photo, et signalez les dommages dûs au transporteur
immédiatement. Demander une inspection par le
transporteur en cas de dommage caché est noté.
8 User Manual | MTI TC Series Cabinets
Unpacking & Set-up
1. Remove shipping straps
and shipping box from
the pallet. Using the
utility knife, cut the shrink
wrap and remove other
shipping materials. Remove
accessories, and other boxes
from the top of the cabinet.
2. Cut and remove the two
internal banding strips
holding the cabinet to the
pallet. Remove the shrink
wrap from the cabinet.
Pull the shrink wrap away
from the cabinet to avoid
scratching the cabinet.
3. Slide the cabinet o the
pallet by moving the cabinet
on the pallet guides until it
is over hanging the back of
the pallet. Slide the back of
the cabinet o the pallet
and pull the pallet out from
underneath the cabinet.
4. Vacuum and pressure
pump installation:
Open the two doors at the
bottom of the cabinet and,
for convenience, remove
the bottom drawer of the
cabinet.
5. Push the power cord out
the hole in the back of the
cabinet and plug the cord
into any standard outlet.
If internal pressure and/or
vacuum pumps were ordered,
proceed to step 6. Otherwise,
proceed to step 15.
6. Remove the electrical
shield in front of the
electrical supply box using a
Phillips screwdriver.
7. Remove the pumps from
their boxes.
Plug the vacuum pump into
the outlet labeled vacuum.
Plug the pressure pump into
the outlet labeled pressure on
the electrical distribution box.
8. Reinstall the electrical
shield removed in step 6.
If the 230V option is ordered,
skip to step 11.
Inside of cabinet Inside of cabinet
Pressure
Pump Vacuum
Pump
Inside of cabinet
9. Place the pressure
pump over the brackets
on the right side of the
cabinet. Align the feet with
the brackets to reduce
movement of the pump
while in use.
10. Place the vacuum pump
over the brackets on the
left side of the cabinet. The
standard vacuum pump is
shown. The high volume
pump will fit in same
location.
11. If the 230V option is ordered
with a pressure and vacuum
pump, the pumps should be
oriented as shown above. If only
one pump is ordered, place it
in the standard position for the
vacuum pump (see step 10)..
12 Connect the pressure
hose with quick connect
fitting to the pressure
pump by pulling back on
the exterior sleeve and
pressing it over the fitting
on the pump.
User Manual | MTI TC Series Cabinets 9
Inside of cabinet Inside of cabinet
13. Connect the black suction
hose from the vacuum pump
to the center hole on the
lid of the vacuum canister
labeled vacuum.
14. Connect the patient hose
with plastic connector to the
port on the canister labeled
patient. All other ports
should be capped.
15. Reinsert the drawer
removed in step 4.
16. If the cabinet is ordered
with central pressure and/or
central vacuum, the cabinet
is equipped with 1/4” NPT
female fittings on the back
of the cabinet. Connect the
corresponding hoses to the
fittings. Set the pressure
regulator to 15 psi.
17. See “Accessories Installation” on page 12 for details regarding the installation of other accessories.
OPERATION
Operating Conditions
Ambient Temperature +10°C to +40°C (+50°F to +104°F)
Relative Humidity 30% to 75% (non-condensing)
Atmospheric Pressure 700hPa to 1060hPa (0.69atm to 1.05atm)
Controls
Control Panel
12
ITEM DESCRIPTION FUNCTION
1 Vacuum/Pressure
Toggle Switch
Toggles between vacuum, o, and pressure.
2 Auxiliary Switch Turns on or o the mirror warmer
10 User Manual | MTI TC Series Cabinets
Electrical Distribution Box
The electrical distribution box powers all of the electrical components in the cabinet. Listed are all of the
components of the box.
1. Auxiliary Fuse 5 Amp: protects the cabinet and its components. If the fuse blows, either the load plugged into
the receptacle it too great or there may be a short and a qualified service technician should inspect for a short.
It has a 5 amp slow blow fuse rating. To replace fuse, turn fuse holder 90 degrees counter clockwise, replace
fuse, reinsert holder and turn it 90 degrees clockwise.
2. Control Panel Female Receptor: the male plug on the control panel or foot control connects here.
3. Mirror Warmer Receptacle: the mirror warmer connects here and is turned on/o with the auxiliary switch on the
control panel.
4. Unassigned Receptacle: Used when a second mirror warmer is present. This receptacle is also turned on/o with
the auxiliary switch on the control panel.
5. Recharging Well Receptacles: the recharging wells connect here. This outlet will always have power.
6. Fiber Optic Light Receptacle: the fiber optic light source connects here and is turned on/o with the auxiliary
switch on the control panel.
7. Vacuum Receptacle: the vacuum connects here and is turned on by rocking the vacuum/pressure to the left and
is turned o by rocking it back to the middle.
8. Pressure Receptacle: the pressure connects here and is turned on by rocking the vacuum/pressure to the right
and is turned o by rocking it back to the middle.
9. (2) 10 Amp Circuit Breakers: the (2) 10 amp circuit breakers protect both the power and neutral lines. If one or
both breakers trip, inspection of all electrical components should be done before they are reset.
1
2
3
6
57
8
9
9
Front View
Side View
4
Drawer Slides
To lock the drawer from sliding back in, slide the
desired drawer out until it stops. Lift up drawer slightly
and pull. As soon as the drawer has cleared the first
hump, lower the drawer back down. To remove the
drawer, lift up the drawer and pull completely out.
Detents
User Manual | MTI TC Series Cabinets 11
Pressure Hose
The pressure hose can be located on either the right
or left side of the cabinet, depending on the cabinet
dexterity. The handle and nozzle assembly is hung on
a plastic hanger.
One end is mushroom shaped and is used for
pressure control. The other end is tapered which
is used to connect to a bottle. Hold the hose and
bottle with one hand and change the pressure with
your thumb. With the pressure turned on, moving the
thumb over the hole of the mushroom shaped end
will increase the allowable pressure. To decrease the
pressure, remove your thumb to varying degrees.
Vacuum Hose
The vacuum hose assembly is made out of a latex-
free black hose. It is turned on and o using the
cabinet control panel. When a dual-suction hose
option is chosen, both vacuum hoses have a shut-
o valve. Frequently turning on and o the vacuum
will cause vacuum pressure to build up in the system
and cause the vacuum to not turn on. See the
“TROUBLESHOOTING GUIDE” on page 18.
Lift-Up Shelf
An optional lift-up shelf can be used for extra
counter space. The shelf is either 12” X 12” or 12” X
18” and comes installed on the cabinet. To lock it
into a horizontal position, lift up on the shelf until
horizontal and push down on the back of the shelf to
ensure that it is locked.
1
2
To unlock the shelf and return it back to a vertical
position, press the two levers on the braces, and let
the shelf down slowly.
1
2
12 User Manual | MTI TC Series Cabinets
ACCESSORIES INSTALLATION
There are many accessories available for the TC
cabinet series. All accessories will be boxed and
wrapped to the cabinet counter top. Most cabinets
are supplied with some bottles, canisters, recharging
wells, rechargeable handles, and instrument heads.
However, verify the product and options against the
order since MTI’s TC Series Cabinets are customizable.
Most accessories either come installed on the cabinet
before shipping, or they are easily installed out of the
box. However, the following accessories need to be
installed.
Cabinet Foot Control
A cabinet foot control is used to control the vacuum
and pressure by foot. It works in conjunction with the
cabinet control box.
To use, rock the pedal to the right to use pressure and
to the left to use the vacuum. As long as the pedal is
actuated, the pump will run. As soon as the pedal is
rocked back to the middle, the pump will stop.
Follow these steps to install the foot pedal in the
cabinet:
1. Feed the foot control
wiring harness through
the electric cord hole from
behind the cabinet into the
cavity of the cabinet.
2. Remove the electrical
shield held on with (2)
screws. See step 7 of
“Unpacking & Set-up” on
page 8. Disconnect the
control panel plug from the
electrical box.
3. Connect the female
connector of the foot
control cable to the
electrical box.
4. Connect the male
connector of the foot
control cable to the control
panel cable. Reattach the
electrical shield.
Glove and Tissue Dispensers
For shipping purposes, the glove and tissue dispensers
are not installed on the cabinet. The dispensers are
wrapped together with any accessories and the (8)
screws are pre-threaded into the mounting holes.
Follow these steps to install the glove and tissue
dispensers on the cabinet:
1. Remove the dispensers from the wrapping and
retrieve the screws from the mounting holes.
2. Using a long Phillips-head screwdriver, mount the
glove/tissue dispensers with the openings facing
outward with the provided screws.
Required Tools
Phillips Screw
Driver
User Manual | MTI TC Series Cabinets 13
Vacuum Pressure Evacuation System
The Vacuum Pressure Evacuation System is primarily
used when clinicians are using small tips and the
high volume vacuum. Portions of this system are pre-
installed at the factory. Follow the following steps to
complete the installation procedure:
1. Remove the vacuum pump from its box.
2. Install the filter in the indicated position below.
3. Remove the attached 24” tube from the pump and
attach it to the T-connector as shown.
4. Attach the 14” tube to the vacuum pump.
5. Attach the 24” tube with elbow to the center port
of the canister.
6. Plug the vacuum pump into the 3-way adapter
along with the evacuation valve and then plug the
adapter into the electrical distribution box at the
location labeled vacuum.
7. Place the vacuum pump over the brackets labeled
vacuum with the feet outside the brackets.
24" tube
14" tube
Vacuum pump plug
attaches to the
center of canister
comes installed on pump
Attached to the
inside of the back
Evacuation
valve plug
3-way adapter
Evacuation valve
High volume
vacuum pump
filter
Electrical
distribution
box
Dual Suction Hoses and Valves
The dual suction hoses and valve option allows a
clinician to have vacuum hoses on both sides of the
cabinet.
Portions of this option are pre-installed at the
factory. Follow the following steps to complete the
installation procedure:
1. Follow the installation steps for the primary side of
the vacuum. See “Unpacking & Set-up” on page 8.
2. Attach the tube of the auxiliary vacuum tip to the
vacuum canister (without an elbow) to the port on the
canister labeled tandem.
To use dual suction hoses with valves, only one
suction tip can be used at a time. The suction tips
have a valve that opens and closes with a twist.
OPEN
CLOSED
14 User Manual | MTI TC Series Cabinets
LIST OF ACCESSORIES
DESCRIPTION USE RESTRICTIONS
Cabinet Foot Control Provides a foot operated control for
the vacuum and pressure.
Canister/Bottle Tower Places the canisters and bottles on
the backwall instead of counter top.
Not available with 4” backwall.
Central Pressure and/or Vacuum Allows connection from a central
vacuum and/or pressure system to
the cabinet.
Excludes an internal vacuum and/or
pressure pump.
Dirty Instrument Tray Provides a recessed tray for dirty
instruments.
Dual Suction Hose Gives the option to have vacuum
suction hose on both sides of the
cabinet.
Eliminate Trash Drop Hole Remove the standard trash drop
hole in a cabinet.
Applicable to C & D sized cabinets
only.
Endoscope Cold Storage Tubes
(Endocaddy)
Storage tubes which store used
endoscope ends. Available in
multiple sizes and mountings.
Glove and Tissue Dispenser Provides a backwall mounted
location for glove and tissue boxes.
High Volume Vacuum Pump Provides a stronger suction than the
standard and is similar to central/
wall vacuum.
Excludes a standard vacuum pump
or central vacuum when ordered.
Instrument Chargers, Backwall,
counter-top, or sidewall mounted
Mounts an instrument charger in the
desired location.
Lift-up Shelf (12” x 12” or 12” x 18”) Provides additional counter space. The 12” x 18” shelf is not available
on the same side as cabinet drawer
locks or the instrument handles.
Light Source, LED Provides a multi-port fiber optic light
source recessed inside the front right
side.
Removes top right drawer. Standard
ports are ACMI, Olympus, Storz, and
Wolf. Pentax available upon request.
Medicine Lock Box Provides a backwall mounted lock
box to secure medicine.
On A & B cabinets, lock box is moved
opposite any chargers or mirror
warmers.
Mirror warmer, backwall or counter-
top recessed
Warms mirrors to prevent fogging
and can be recessed in the counter-
top or mounted on the backwall.
Mirror Warming Drawer Warms instruments to prevent
fogging.
Only available in small drawer under
the cabinet control panel.
Single or Multi Drawer Locks (RH/LH) Single lock locks top right hand
drawer. Left or Right hand mounted
multi drawer locks multiple drawers
Does not lock the opposite side
drawer.
User Manual | MTI TC Series Cabinets 15
LIST OF ACCESSORIES
DESCRIPTION USE RESTRICTIONS
Solid Surface Counter-top Provides a hard non-porous surface
counter-top.
Vacuum Pressure Evacuation System Provides a method to relieve excess
vacuum pressure build-up.
16 User Manual | MTI TC Series Cabinets
MAINTENANCE
WARNING/AVERTISSEMENT
There are no user serviceable parts inside. Refer all
servicing to a qualified service technician.
Aucune pièce interne ne peut être réparée par
l’utilisateur. Adressez-vous à un technicien qualifié.
WARNING/AVERTISSEMENT
The Control of Hazardous Energy (lockout/tagout)
§1910.147 procedure must be followed to disable
equipment, preventing the release of hazardous energy
while performing servicing and maintenance activities.
La procédure de La Maîtrise des Énergies Dangereuses
(lockout/ déconsignation) § 1910.147 doit être suivie pour
désactiver l’équipement, empêchant la libération des
énergies dangereuses lors de l’exécution des activités
de maintenance et d’entretien.
CAUTION/PRÉCAUTION
This equipment may be damaged by solvents and
dyes. Immediately remove any fluids spilled on the
equipment.
Cet équipement peut être endommagé par des solvants
et des colorants. Retirer immédiatement tout liquide
renversé sur l’équipement.
CAUTION/PRÉCAUTION
Any sprayed disinfectant or cleaning solution should be
wiped up immediately after application and not let to
stand. A small sample area should be tested before any
large application of any cleaner/disinfectant.
Tout désinfectant pulvérisé ou solution de nettoyage
doivent être essuyés immédiatement après l’application
et ne pas laisser reposer. Une petite zone de
l’échantillon doit être testé avant toute application
complète d’un nettoyant/désinfectant.
NOTICE/AVIS
MTI recommends cleaning the equipment frequently.
MTI recommande de nettoyer l’équipement
fréquemment.
Cleaning and Disinfection
Plastic Laminate
A quality grade of plastic/vinyl cleaner like SD-20
or a mild detergent in warm water with a soft cloth
should be used to clean all the laminate surfaces. For
a disinfectant, use a combination of 10% household
bleach and 90% water. Make sure to dry with a soft
cloth.
CAUTION/PRÉCAUTION
Acidic or abrasive cleaners can damage laminate
surfaces. Do not use them.
Nettoyants abrasifs ou acides peuvent endommager le
stratifié. Ne les utilisez pas.
CAUTION/PRÉCAUTION
Do not leave any moisture on any part of the cabinet
for an extended period of time.
Ne laissez pas l’humidité sur toute partie du meuble
pour une période de temps prolongée.
CAUTION/PRÉCAUTION
When working with betadine, neosynephrine, hydrogen
peroxide, silver nitrate, or any other type of harsh
chemicals, do not allow it to get on the cabinet surface.
If it does get on the cabinet, wipe it up immediately or
staining will occur.
Lorsque vous travaillez avec de la bétadine,
néosynéphrine, le peroxyde d’hydrogène, le nitrate
d’argent, ou tout autre type de produits chimiques
agressifs, ne lui permet pas de monter sur la surface
du meuble. Si elle ne obtient sur le meuble essuyez-le
immédiatement ou coloration se produira.
Stainless Steel
Stainless steel surfaces should be wiped down with
a quality grade of plastic/vinyl cleaner like SD-20 or
a mild detergent in warm water with a soft cloth and
then a stainless steel polish applied.
Painted Surfaces
All painted metal parts have been electrostatically
painted and the paint is baked on for durability. These
surfaces should be wiped down with a quality grade
cleaner and a soft cloth or a damp cloth with mild
soap once a week.
La page est en cours de chargement...
La page est en cours de chargement...
La page est en cours de chargement...
La page est en cours de chargement...
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
