Binatone Eclipse Plus-3 Manuel utilisateur

Catégorie
Téléphones
Taper
Manuel utilisateur

Ce manuel convient également à

USER GUIDE
Eclipse Plus / Eclipse Plus-2 /
Eclipse Plus-3 / Eclipse Plus-4
DECT Telephone
with Answering Machine
Binatone North America
5875 Castle Creek Pkwy Suite 315
Indianapolis, IN 46250
TEL: (1) 317 436 8383
Visit our website: www.idectonline.com
Contact Customer Service in the US and Canada at (1) 317 436 8383
Before operating this set,
please read these instructions carefully.
THIS
EQUIPMENT
IS
NOT
DESIGNED
FOR
MAKING
EMERGENCY
TELEPHONE
CALLS
WITHOUT MAINS POWER.
ALTERNATIVE
ARRANGEMENTS
SHOULD
BE MADE
FOR
ACCESS
TO
EMERGENCY
SERVICES.
1
Table of Contents
1
IMPORTANT SAFETY INSTRUCTIONS........................................ 6
2
INSTALLING YOUR PHONE ....................................................... 9
2.1
Connecting the Base Station ................................................... 9
2.2
Installing and Charging the Rechargeable Batteries in the Main
Eclipse Handset ....................................................................... 9
2.3
Installing and Charging the Rechargeable Batteries in an
Additional Handset ................................................................ 10
2.4
Removing the back cover of the Main Eclipse Handset ......... 10
3
GETTING TO KNOW YOUR PHONE ......................................... 11
3.1
Overview of the Main Eclipse Handset and the Base Station 11
3.2
Display Icons and Symbols on the Main Eclipse Handset ...... 14
3.3
Overview of the Handset, Base Station and *Charging Pod
Error! Bookmark not defined.
3.4
Display Icons and Symbols ......... Error! Bookmark not defined.
3.5
Overview of the Additional Handset and Charging Pod (for
ECLIPSE-2 / -3 / -4 models only) ............................................ 16
3.6
Display Icons and Symbols on the Additional Handsets (for
ECLIPSE-2 / -3 / -4 models only) ............................................ 19
3.7
Menu Map and Menu Navigation on the Main Eclipse Handset
.............................................................................................. 21
3.8
Menu Map and Menu Navigation on the Additional Handsets
(for ECLIPSE-2 / -3 / -4 models only) ...................................... 22
3.9
Text and Number Entry.......................................................... 23
2
3.9.1
Character Map of the Main Eclipse Handset ......................... 23
3.9.2
Character Map of the Additional Handsets (for ECLIPSE-2 / -3 /
-4 models only) ...................................................................... 24
4
USING YOUR PHONE .............................................................. 25
4.1
Make a Call ............................................................................ 25
4.1.1
Pre-dialling ............................................................................ 25
4.1.2
Direct Dialling ........................................................................ 25
4.1.3
Call from the Redial List(5 last number on handset) ............. 25
4.1.4
Call from the Call Log(30 name & number call log) ............... 26
4.1.5
Call from the Phonebook(30 entries on handset) ................. 26
4.2
Answer and End a Call ........................................................... 27
4.3
Handset Speakerphone ......................................................... 27
4.4
Adjust Earpiece Volume ........................................................ 27
4.5
Adjust Speaker Volume ......................................................... 27
4.6
Mute/Unmute the Microphone ............................................ 28
4.7
Paging .................................................................................... 28
4.8
Switching the Handset On/Off............................................... 28
4.9
To Lock/Unlock the Keypad ................................................... 29
4.10
Make an Internal Call (Multi - handset models only) ............ 29
4.11
Initiate an Intercom Call ........................................................ 29
4.12
Answer an External Call during an Intercom Call ................... 30
4.13
Initiate an Intercom during a Call .......................................... 31
4.14
Transfer an External Call to another Handset ........................ 32
5
DIRECT ACCESS MEMORY ...................................................... 33
3
5.1
Add Direct Access Memory ................................................... 33
5.2
Delete Direct Access Memory ............................................... 35
6
PHONEBOOK ......................................................................... 36
6.1
Store a Contact in the Phonebook ......................................... 36
6.2
Access the Phonebook .......................................................... 38
6.3
Modify a Phonebook Entry .................................................... 39
6.4
Delete a Phonebook Entry ..................................................... 40
6.5
Delete All Entries from the Phonebook List ........................... 41
7
CALLER DISPLAY (NETWORK DEPENDENT) ............................ 42
7.1
Call Log .................................................................................. 42
7.1.1
Access the Call Log ................................................................ 42
7.1.2
Save a Call Log Entry into the Phonebook ............................. 43
7.1.3
Delete a Call Log Entry ........................................................... 44
7.1.4
Delete All Entries in the Call Log ............................................ 44
7.2
Redial List .............................................................................. 45
7.2.1
Access the Redial List............................................................. 45
7.2.2
Save a Redial Number into the Phonebook ........................... 45
7.2.3
Edit a Redial Number ............................................................. 46
7.2.4
Delete a Redial Number ........................................................ 47
7.2.5
Delete All Entries from the Redial List ................................... 47
8
CLOCK AND ALARM SETTINGS ............................................... 49
8.1
Date and Time Settings.......................................................... 49
8.1.1
Change the Time Format ....................................................... 51
8.1.2
Change the Date Format ....................................................... 52
4
8.2
Alarm Settings ....................................................................... 53
8.2.1
Set the Alarm Melody............................................................ 54
9
HANDSET OPTS ...................................................................... 56
9.1
Set the Ring Volume .............................................................. 56
9.2
Set the Ring Tone ................................................................... 57
9.3
Set the Key Tone .................................................................... 58
9.4
Rename the Handset ............................................................. 59
9.5
Set the Display Language ....................................................... 60
9.6
Set Auto Hang-up .................................................................. 61
10
SETTINGS ............................................................................... 62
10.1
Handset Registration ............................................................. 62
10.2
Register Additional Handsets ................................................ 62
10.3
Deregister your Handset ....................................................... 63
10.4
Change the Recall Time ......................................................... 64
10.5
Reset the Unit ........................................................................ 65
10.6
AREA CODE ............................................................................ 66
11
ANSWERING MACHINE .......................................................... 67
11.1
Turning the Answering Machine On/Off ............................... 67
11.2
Answering Machine Settings ................................................. 68
11.2.1
Set the Ring Delay ................................................................. 68
11.2.2
Activate/Deactivate Remote Access ...................................... 69
11.2.3
Change the Voice Language................................................... 70
11.3
Message Playback ................................................................. 71
5
11.4
Delete All Messages .............................................................. 72
11.5
Announcement ...................................................................... 72
11.5.1
Record a Personal Announcement ........................................ 73
11.5.2
Listen to an announcement ................................................... 74
11.5.3
Delete a Personal Announcement ......................................... 75
11.6
Change Security Code ............................................................ 76
11.7
Remote Access ...................................................................... 76
11.7.1
Access the Answering Machine Remotely ............................. 77
12
help ....................................................................................... 78
13
General information .............................................................. 80
13.1
If your product is not working properly... .............................. 80
13.2
Important safety instructions ................................................ 80
13.3
Unplug this cordless phone immediately from an outlet if: .. 81
13.4
Battery Safety Instructions .................................................... 82
13.5
Consumer Products and Accessories Limited Warranty
("Warranty") .......................................................................... 82
13.6
Exclusions .............................................................................. 84
13.7
FCC, ACTA and IC regulations ................................................. 86
14
TECHNICAL DETAILS ............................................................... 89
15
Industry Canada .................................................................... 90
6
1 IMPORTANT SAFETY INSTRUCTIONS
WARNING
Do not place your phone in the bathroom or other humid areas.
Location
When choosing a location for your new phone, here are some important
guidelines you should consider:
Avoid sources of noise and heat, such as motors, fluorescent lighting,
microwave ovens, heating appliances and direct sunlight.
Avoid areas of excessive dust, moisture and low temperature.
Avoid other cordless telephones or personal computers.
Never install telephone wiring during a lightning storm.
Never install telephone jacks in wet locations unless the jack is
specifically designed for wet locations.
Never touch non-insulated telephone wires or terminals, unless the
telephone line has been disconnected at the network interface.
Use caution when installing or modifying telephone lines.
HANDSET RANGE
Optimal range is reached when there are no other electrical appliances
working within the range area. Any obstruction between the base and
handset will also reduce the range significantly.
SIGNAL STRENGTH
When out of range of the corded base, the screen shows OUT OF RANGE.
If you are on a call, the line will hang up. Move back within in range. The
cordless handset will automatically re-connect to the corded base.
Setting up
IMPORTANT
The base must be plugged into an electrical outlet at all times. Do not
connect the telephone line cord into the telephone wall jack until the
handset is fully charged. Only use the adapter and telephone line cord
supplied with the product.
WHICH POWER ADAPTER?
The power adapter with the smaller pin is for the base unit and the
power adapter with the bigger pin is for the charger unit (only for
multi-handset packs).
7
Package Content for Eclipse model
The package contains the following items:
1 Eclipse Handset
1 Base Station
1 Mains Power Adapter for the Base Station
1 Telephone Line Cord
1 AAA NiMH Rechargeable Battery Pack
1 Back Cover for the Eclipse Handset
1 Back Cover Unlock Tool
1 User Guide
Note: If you have purchased a Eclipse-2, Eclipse-3 or Eclipse-4 system,
you will also have the corresponding extra handset(s) and batteries, a
charging pod and a back cover for each extra handset.
Connection and Conditions for Use
You can connect your phone to a direct exchange line (DEL) on a local
exchange with its own phone number; to an extension socket connected
to a DEL; or to an extension on an approved compatible PBX. Do not
connect as an extension to a pay phone.
The ringer equivalence numbers (REN) of all equipment (phones, fax
machines, modems, etc.) connected to an exchange line must not
add up to more than 4, otherwise one or more of them may not ring
and/or answer calls correctly. The phone has a REN of 1, and most
other telephones have a REN of 1 unless marked otherwise.
8
Handset & Base Connection
1) When purchased, all handsets are already registered to the base
unit and should link to it when they are all powered up.
2) To use your cordless handset and base unit together, you must be
able to establish a radio link between them. The signal between the
handset and the base unit is in accordance with the normal
standards for a DECT phone: Maximum range up to 300 metres
outdoors or 50 metres indoors. Be aware that:
> Large metal objects, such as refrigerators, mirrors or filing
cabinets, between the handset and the base unit may block the
radio signal.
> Solid structures, such as walls, may reduce the signal strength.
> Electrical equipment may cause interference and/or affect the
range.
3) Do not place the base unit close to another telephone, TV or audio
equipment - it may cause interference.
4) Putting the base unit as high as possible ensures the best signal.
5) If the sound in the earpiece becomes faint or distorted during a call,
you may be going out of range of the base unit. Move nearer to the
base unit within 20 seconds; otherwise the line may be cut off.
9
2 INSTALLING YOUR PHONE
2.1 Connecting the Base Station
1) Plug the mains power cable and telephone line
cord
into the base station.
2) Plug the power adapter into a 100 - 240Vac,
50 - 60Hz mains power socket, and the
telephone line cord
into a telephone line socket.
Warning:
Always use the cables provided in the box.
Use only the supplied adaptor. Using other power
cables may damage the unit.
Note:
Place the base unit within easy reach of the mains power socket.
Never try to lengthen the mains power cable.
The base station needs mains power for normal operation, and the
cordless handsets will not work without it.
2.2 Installing and Charging the Rechargeable Batteries in the Main
Eclipse Handset
1) Insert the 2 supplied batteries into the battery compartment,
observing the correct polarity (see markings inside battery
compartment).
Warning: Use only the supplied NiMH rechargeable
batteries.
2) Place the back cover over the back of the
handset and press down until it clicks into place.
3) Place the handset on the base and charge for 15
hours before using the handset for the first time.
The handset will give a double beep when it
is properly placed on the base and the
battery charging indicator on the base lights
up to indicate charging.
Note: The handset may become warm when the
batteries are being charged or during prolonged periods of use. This is
normal and does not indicate a fault.
T
o the
telephone line
socket
To
the mains
power socket
10
2.3 Installing and Charging the Rechargeable Batteries in an
Additional Handset
1) Insert the 2 supplied batteries into the
battery compartment, observing the
correct polarity (see markings inside
battery compartment).
Warning: Use only the supplied NiMH
rechargeable batteries.
2) Place the back cover over the back of the
handset and press down until it clicks
into place.
3) Place the handset on the charging pod
and charge for 15 hours before using the
handset for the first time.
The handset will give a double beep when it is properly placed
on the charging pod and the battery charging indicator on the
charging pod lights up to indicate charging.
2.4 Removing the back cover of the Main Eclipse
Handset
Insert the supplied key into the groove as
indicated in the illustration and twist it
clockwise to release the back cover.
If you have a broadband line
If you connect your telephone to a line with a
broadband connection, you will need to insert a
micro-filter between the telephone and the telephone line; otherwise
you may get interference between the telephone and the broadband,
which could cause problems.
In a home with broadband, every telephone must have a micro-filter
connected, not just the one at the telephone point that your modem is
connected to.
If you need more broadband micro-filters contact your broadband
supplier.
11
3 GETTING TO KNOW YOUR PHONE
3.1 Overview of the Main Eclipse Handset and the Base Station
Eclipse Handset
Base station (top)
Base station (b
ottom
)
12
EARPIECE
LCD DISPLAY
Displays menus, phone numbers, handset
name, date/time
and status icons.
M
In standby mode, press to enter the Main
Menu list.
Press to select an item, or to save an entry
or setting.
+
In menu mode, press to scroll up.
During a call or message playback, press
to increase the volume.
In standby mode, press to access the call
log
(CID)
.
T
In standby mode, p
ress to make or answer
a call.
During a call, press to send a Flash signal
(also called Recall) for network services.
*
In standby mode, p
ress and hold to switch
the key lock on or off.
F
In
standby mode, press to make or answer
a call in speakerphone mode.
During a call or message playback, press
to switch between speakerphone and
earpiece.
MICROPHONE
m
Press to cancel an action.
During pre-dialling, press to delete the last
digit entered.
During a call, press to mute the
microphone, and press again to resume
conversation.
-
In menu mode, press to scroll down.
During a call, or message playback, press
to decrease the volume.
In standby mode, press to access the
phonebook list.
13
O
During a call, press to
end the call
During programming, press to cancel and
exit without making changes.
In standby mode, press and hold to power
the handset on/off.
#
In standby mode, p
ress and hold to turn the
handset ringer on/off.
Press and hold to add a dialling pause when
dialling or entering numbers into the
phonebook.
I
In standby mode or during a call, press to
initiate an intercom call or transfer a call.
R
In standby mode, press to access the redial
list.
Lights up in Green when the answering
machine is on.
Flashes if there are new messages.
Flashes rapidly if the answering machine
memory is full.
Lights up in Red when a handset is on the
base to indicate it is charging.
Press to find
/
page
all registered handsets.
Press the button again, or any key on the
handset to turn off the page signal.
Press and hold to start registration process.
14
3.2 Display Icons and Symbols on the Main Eclipse Handset
The home screen of the Main Eclipse Handset gives you information on
the current status of the phone.
Icon
Meaning
Displays when the battery is fully charged.
Internal segments cycle while charging.
Displays when the line is in use.
Flashes when there is an incoming call.
Flashes when you have a new voicemail message.
(This is
a caller display service and is not usually available from
UK network providers.)
Displays when you have new missed calls, or the call log
is being viewed.
Displays when the phonebook is
accessed.
Displays when the alarm is set.
Displays when handset ringer is turned off.
15
Displays when the handset is registered and within
range of the base station.
Flashes when the handset is out of range and is
searching for a base.
Displays
when the answering machine is on.
Flashes slowly when there are new answering machine
message(s) or when the answering machine memory is
full.
Turns on when confirmation of selection or programming
is available.
Turns on during phonebook editing mode
to delete the
last digit.
Turns on during menu mode when you can return to the
previous state or previous step.
Turns on when the screen display is on.
16
3.3 Overview of the Additional Handset and Charging Pod (for
ECLIPSE-2 / -3 / -4 models only)
17
EARPIECE
LCD DISPLAY
Displays menus, phone numbers,
handset name and status icons.
M
In standby mode, press to enter the
Main Menu list.
Press to select an item, or to save an
entry or setting.
+
In menu mode, press to scroll up.
During a call or message playback,
press to increase the volume.
In standby mode, press to access the
call log (CID).
I
n standby mode, p
ress to make or
answer a call.
during a call, press to send a flash
signal (also called recall) from
network service
.
*
In standby mode, press and hold to
switch the key lock on or off.
During a call
or
message playback
,
press to switch between
speakerphone and earpice
.
MICROPHONE
m
Press to cancel an action.
During pre-dialling, press to delete
the last digit entered.
During a call, press to mute the
microphone, and press again to
resume
conversation.
-
In menu mode, press to scroll down.
During a call, or message playback,
press to decrease the volume.
In standby mode, press to access the
phonebook list.
18
O
During a call, press to end the call.
During programming, press to cancel
and exit without making changes.
In standby mode, press and hold to
power the handset on/off.
#
In standby mode, press and hold to
turn the handset ringer on/off.
Press and hold to add a dialling
pause when dialling or entering
numbers into the phonebook.
I
In standby mode or during a call,
press to initiate an intercom call or
transfer a call.
R
In standby mode, press to access the
redial list.
Lights up in Red when a handset is
on the charging pod to indicate it is
charging.
19
3.4 Display Icons and Symbols on the Additional Handsets (for
ECLIPSE-2 / -3 / -4 models only)
The home screen of the additional handsets gives you information on the
current status of the phone.
Icon
Meaning
Displays
when the battery is almost empty.
Displays when the battery is fully charged.
Blinks (3s on / 1s off) when the battery is partly discharged.
Flashes (1s on / 1s off) when the battery level is low.
Displays when the line is in use.
Flashes when there
is an incoming call.
Flashes when you have a new voicemail message.
(This is a
caller display service and is not usually available from UK
network providers.)
Displays when you have new missed calls, or the call log is
being viewed.
Displays
when the phonebook is accessed.
Displays when the alarm is set.
Displays when handset ringer is turned off.
Displays when the handset is registered and within
range of
the base station.
Flashes when the handset is out of range and is searching
for a base.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72
  • Page 73 73
  • Page 74 74
  • Page 75 75
  • Page 76 76
  • Page 77 77
  • Page 78 78
  • Page 79 79
  • Page 80 80
  • Page 81 81
  • Page 82 82
  • Page 83 83
  • Page 84 84
  • Page 85 85
  • Page 86 86
  • Page 87 87
  • Page 88 88
  • Page 89 89
  • Page 90 90
  • Page 91 91
  • Page 92 92
  • Page 93 93
  • Page 94 94
  • Page 95 95
  • Page 96 96
  • Page 97 97
  • Page 98 98
  • Page 99 99
  • Page 100 100
  • Page 101 101
  • Page 102 102
  • Page 103 103
  • Page 104 104
  • Page 105 105
  • Page 106 106
  • Page 107 107
  • Page 108 108
  • Page 109 109
  • Page 110 110
  • Page 111 111
  • Page 112 112
  • Page 113 113
  • Page 114 114
  • Page 115 115
  • Page 116 116
  • Page 117 117
  • Page 118 118
  • Page 119 119
  • Page 120 120
  • Page 121 121
  • Page 122 122
  • Page 123 123
  • Page 124 124
  • Page 125 125
  • Page 126 126
  • Page 127 127
  • Page 128 128
  • Page 129 129
  • Page 130 130
  • Page 131 131
  • Page 132 132
  • Page 133 133
  • Page 134 134
  • Page 135 135
  • Page 136 136
  • Page 137 137
  • Page 138 138
  • Page 139 139
  • Page 140 140
  • Page 141 141
  • Page 142 142
  • Page 143 143
  • Page 144 144
  • Page 145 145
  • Page 146 146
  • Page 147 147
  • Page 148 148
  • Page 149 149
  • Page 150 150
  • Page 151 151
  • Page 152 152
  • Page 153 153
  • Page 154 154
  • Page 155 155
  • Page 156 156
  • Page 157 157
  • Page 158 158
  • Page 159 159
  • Page 160 160
  • Page 161 161

Binatone Eclipse Plus-3 Manuel utilisateur

Catégorie
Téléphones
Taper
Manuel utilisateur
Ce manuel convient également à

dans d''autres langues