Binatone Eclipse Plus-4 Manuel utilisateur

USER GUIDE

Eclipse Plus / Eclipse Plus-2 /

Eclipse Plus-3 / Eclipse Plus-4

DECT Telephone

with Answering Machine

Binatone North America

5875 Castle Creek Pkwy Suite 315

Indianapolis, IN 46250

TEL: (1) 317 436 8383

Visit our website: www.idectonline.com

Contact Customer Service in the US and Canada at (1) 317 436 8383

Before operating this set,

please read these instructions carefully.

THIS

EQUIPMENT

IS

NOT

DESIGNED

FOR

MAKING

EMERGENCY

TELEPHONE

CALLS

WITHOUT MAINS POWER.

ALTERNATIVE

ARRANGEMENTS

SHOULD

BE MADE

FOR

ACCESS

TO

EMERGENCY

SERVICES.

1

Table of Contents

1

IMPORTANT SAFETY INSTRUCTIONS........................................ 6

2

INSTALLING YOUR PHONE ....................................................... 9

2.1

Connecting the Base Station ................................................... 9

2.2

Installing and Charging the Rechargeable Batteries in the Main

Eclipse Handset ....................................................................... 9

2.3

Installing and Charging the Rechargeable Batteries in an

Additional Handset ................................................................ 10

2.4

Removing the back cover of the Main Eclipse Handset ......... 10

3

GETTING TO KNOW YOUR PHONE ......................................... 11

3.1

Overview of the Main Eclipse Handset and the Base Station 11

3.2

Display Icons and Symbols on the Main Eclipse Handset ...... 14

3.3

Overview of the Handset, Base Station and *Charging Pod

Error! Bookmark not defined.

3.4

Display Icons and Symbols ......... Error! Bookmark not defined.

3.5

Overview of the Additional Handset and Charging Pod (for

ECLIPSE-2 / -3 / -4 models only) ............................................ 16

3.6

Display Icons and Symbols on the Additional Handsets (for

ECLIPSE-2 / -3 / -4 models only) ............................................ 19

3.7

Menu Map and Menu Navigation on the Main Eclipse Handset

.............................................................................................. 21

3.8

Menu Map and Menu Navigation on the Additional Handsets

(for ECLIPSE-2 / -3 / -4 models only) ...................................... 22

3.9

Text and Number Entry.......................................................... 23

2

3.9.1

Character Map of the Main Eclipse Handset ......................... 23

3.9.2

Character Map of the Additional Handsets (for ECLIPSE-2 / -3 /

-4 models only) ...................................................................... 24

4

USING YOUR PHONE .............................................................. 25

4.1

Make a Call ............................................................................ 25

4.1.1

Pre-dialling ............................................................................ 25

4.1.2

Direct Dialling ........................................................................ 25

4.1.3

Call from the Redial List(5 last number on handset) ............. 25

4.1.4

Call from the Call Log(30 name & number call log) ............... 26

4.1.5

Call from the Phonebook(30 entries on handset) ................. 26

4.2

Answer and End a Call ........................................................... 27

4.3

Handset Speakerphone ......................................................... 27

4.4

Adjust Earpiece Volume ........................................................ 27

4.5

Adjust Speaker Volume ......................................................... 27

4.6

Mute/Unmute the Microphone ............................................ 28

4.7

Paging .................................................................................... 28

4.8

Switching the Handset On/Off............................................... 28

4.9

To Lock/Unlock the Keypad ................................................... 29

4.10

Make an Internal Call (Multi - handset models only) ............ 29

4.11

Initiate an Intercom Call ........................................................ 29

4.12

Answer an External Call during an Intercom Call ................... 30

4.13

Initiate an Intercom during a Call .......................................... 31

4.14

Transfer an External Call to another Handset ........................ 32

5

DIRECT ACCESS MEMORY ...................................................... 33

3

5.1

Add Direct Access Memory ................................................... 33

5.2

Delete Direct Access Memory ............................................... 35

6

PHONEBOOK ......................................................................... 36

6.1

Store a Contact in the Phonebook ......................................... 36

6.2

Access the Phonebook .......................................................... 38

6.3

Modify a Phonebook Entry .................................................... 39

6.4

Delete a Phonebook Entry ..................................................... 40

6.5

Delete All Entries from the Phonebook List ........................... 41

7

CALLER DISPLAY (NETWORK DEPENDENT) ............................ 42

7.1

Call Log .................................................................................. 42

7.1.1

Access the Call Log ................................................................ 42

7.1.2

Save a Call Log Entry into the Phonebook ............................. 43

7.1.3

Delete a Call Log Entry ........................................................... 44

7.1.4

Delete All Entries in the Call Log ............................................ 44

7.2

Redial List .............................................................................. 45

7.2.1

Access the Redial List............................................................. 45

7.2.2

Save a Redial Number into the Phonebook ........................... 45

7.2.3

Edit a Redial Number ............................................................. 46

7.2.4

Delete a Redial Number ........................................................ 47

7.2.5

Delete All Entries from the Redial List ................................... 47

8

CLOCK AND ALARM SETTINGS ............................................... 49

8.1

Date and Time Settings.......................................................... 49

8.1.1

Change the Time Format ....................................................... 51

8.1.2

Change the Date Format ....................................................... 52

4

8.2

Alarm Settings ....................................................................... 53

8.2.1

Set the Alarm Melody............................................................ 54

9

HANDSET OPTS ...................................................................... 56

9.1

Set the Ring Volume .............................................................. 56

9.2

Set the Ring Tone ................................................................... 57

9.3

Set the Key Tone .................................................................... 58

9.4

Rename the Handset ............................................................. 59

9.5

Set the Display Language ....................................................... 60

9.6

Set Auto Hang-up .................................................................. 61

10

SETTINGS ............................................................................... 62

10.1

Handset Registration ............................................................. 62

10.2

Register Additional Handsets ................................................ 62

10.3

Deregister your Handset ....................................................... 63

10.4

Change the Recall Time ......................................................... 64

10.5

Reset the Unit ........................................................................ 65

10.6

AREA CODE ............................................................................ 66

11

ANSWERING MACHINE .......................................................... 67

11.1

Turning the Answering Machine On/Off ............................... 67

11.2

Answering Machine Settings ................................................. 68

11.2.1

Set the Ring Delay ................................................................. 68

11.2.2

Activate/Deactivate Remote Access ...................................... 69

11.2.3

Change the Voice Language................................................... 70

11.3

Message Playback ................................................................. 71

5

11.4

Delete All Messages .............................................................. 72

11.5

Announcement ...................................................................... 72

11.5.1

Record a Personal Announcement ........................................ 73

11.5.2

Listen to an announcement ................................................... 74

11.5.3

Delete a Personal Announcement ......................................... 75

11.6

Change Security Code ............................................................ 76

11.7

Remote Access ...................................................................... 76

11.7.1

Access the Answering Machine Remotely ............................. 77

12

help ....................................................................................... 78

13

General information .............................................................. 80

13.1

If your product is not working properly... .............................. 80

13.2

Important safety instructions ................................................ 80

13.3

Unplug this cordless phone immediately from an outlet if: .. 81

13.4

Battery Safety Instructions .................................................... 82

13.5

Consumer Products and Accessories Limited Warranty

("Warranty") .......................................................................... 82

13.6

Exclusions .............................................................................. 84

13.7

FCC, ACTA and IC regulations ................................................. 86

14

TECHNICAL DETAILS ............................................................... 89

15

Industry Canada .................................................................... 90

6

1 IMPORTANT SAFETY INSTRUCTIONS

WARNING

Do not place your phone in the bathroom or other humid areas.

Location

When choosing a location for your new phone, here are some important

guidelines you should consider:

 Avoid sources of noise and heat, such as motors, fluorescent lighting,

microwave ovens, heating appliances and direct sunlight.

 Avoid areas of excessive dust, moisture and low temperature.

 Avoid other cordless telephones or personal computers.

 Never install telephone wiring during a lightning storm.

 Never install telephone jacks in wet locations unless the jack is

specifically designed for wet locations.

 Never touch non-insulated telephone wires or terminals, unless the

telephone line has been disconnected at the network interface.

 Use caution when installing or modifying telephone lines.

HANDSET RANGE

Optimal range is reached when there are no other electrical appliances

working within the range area. Any obstruction between the base and

handset will also reduce the range significantly.

SIGNAL STRENGTH

When out of range of the corded base, the screen shows OUT OF RANGE.

If you are on a call, the line will hang up. Move back within in range. The

cordless handset will automatically re-connect to the corded base.

Setting up

IMPORTANT

The base must be plugged into an electrical outlet at all times. Do not

connect the telephone line cord into the telephone wall jack until the

handset is fully charged. Only use the adapter and telephone line cord

supplied with the product.

WHICH POWER ADAPTER?

The power adapter with the smaller pin is for the base unit and the

power adapter with the bigger pin is for the charger unit (only for

multi-handset packs).

7

Package Content for Eclipse model

The package contains the following items:

 1 Eclipse Handset

 1 Base Station

 1 Mains Power Adapter for the Base Station

 1 Telephone Line Cord

 1 AAA NiMH Rechargeable Battery Pack

 1 Back Cover for the Eclipse Handset

 1 Back Cover Unlock Tool

 1 User Guide

Note: If you have purchased a Eclipse-2, Eclipse-3 or Eclipse-4 system,

you will also have the corresponding extra handset(s) and batteries, a

charging pod and a back cover for each extra handset.

Connection and Conditions for Use

You can connect your phone to a direct exchange line (DEL) on a local

exchange with its own phone number; to an extension socket connected

to a DEL; or to an extension on an approved compatible PBX. Do not

connect as an extension to a pay phone.

The ringer equivalence numbers (REN) of all equipment (phones, fax

machines, modems, etc.) connected to an exchange line must not

add up to more than 4, otherwise one or more of them may not ring

and/or answer calls correctly. The phone has a REN of 1, and most

other telephones have a REN of 1 unless marked otherwise.

8

Handset & Base Connection

1) When purchased, all handsets are already registered to the base

unit and should link to it when they are all powered up.

2) To use your cordless handset and base unit together, you must be

able to establish a radio link between them. The signal between the

handset and the base unit is in accordance with the normal

standards for a DECT phone: Maximum range up to 300 metres

outdoors or 50 metres indoors. Be aware that:

> Large metal objects, such as refrigerators, mirrors or filing

cabinets, between the handset and the base unit may block the

radio signal.

> Solid structures, such as walls, may reduce the signal strength.

> Electrical equipment may cause interference and/or affect the

range.

3) Do not place the base unit close to another telephone, TV or audio

equipment - it may cause interference.

4) Putting the base unit as high as possible ensures the best signal.

5) If the sound in the earpiece becomes faint or distorted during a call,

you may be going out of range of the base unit. Move nearer to the

base unit within 20 seconds; otherwise the line may be cut off.

9

2 INSTALLING YOUR PHONE

2.1 Connecting the Base Station

1) Plug the mains power cable and telephone line

cord

into the base station.

2) Plug the power adapter into a 100 - 240Vac,

50 - 60Hz mains power socket, and the

telephone line cord

into a telephone line socket.

Warning:

Always use the cables provided in the box.

Use only the supplied adaptor. Using other power

cables may damage the unit.

Note:

Place the base unit within easy reach of the mains power socket.

Never try to lengthen the mains power cable.

The base station needs mains power for normal operation, and the

cordless handsets will not work without it.

2.2 Installing and Charging the Rechargeable Batteries in the Main

Eclipse Handset

1) Insert the 2 supplied batteries into the battery compartment,

observing the correct polarity (see markings inside battery

compartment).

Warning: Use only the supplied NiMH rechargeable

batteries.

2) Place the back cover over the back of the

handset and press down until it clicks into place.

3) Place the handset on the base and charge for 15

hours before using the handset for the first time.

The handset will give a double beep when it

is properly placed on the base and the

battery charging indicator on the base lights

up to indicate charging.

Note: The handset may become warm when the

batteries are being charged or during prolonged periods of use. This is

normal and does not indicate a fault.

T

o the

telephone line

socket

To

the mains

power socket

10

2.3 Installing and Charging the Rechargeable Batteries in an

Additional Handset

1) Insert the 2 supplied batteries into the

battery compartment, observing the

correct polarity (see markings inside

battery compartment).

Warning: Use only the supplied NiMH

rechargeable batteries.

2) Place the back cover over the back of the

handset and press down until it clicks

into place.

3) Place the handset on the charging pod

and charge for 15 hours before using the

handset for the first time.

The handset will give a double beep when it is properly placed

on the charging pod and the battery charging indicator on the

charging pod lights up to indicate charging.

2.4 Removing the back cover of the Main Eclipse

Handset

Insert the supplied key into the groove as

indicated in the illustration and twist it

clockwise to release the back cover.

If you have a broadband line

If you connect your telephone to a line with a

broadband connection, you will need to insert a

micro-filter between the telephone and the telephone line; otherwise

you may get interference between the telephone and the broadband,

which could cause problems.

In a home with broadband, every telephone must have a micro-filter

connected, not just the one at the telephone point that your modem is

connected to.

If you need more broadband micro-filters contact your broadband

supplier.

11

3 GETTING TO KNOW YOUR PHONE

3.1 Overview of the Main Eclipse Handset and the Base Station

①

②

③

④

⑤

⑥

⑦

⑧

⑨

⑩

⑪

⑫

⑬

⑭

Eclipse Handset

Base station (top)

⑮

⑯

Base station (b

ottom

)

⑰

12

①

EARPIECE

②

LCD DISPLAY

Displays menus, phone numbers, handset

name, date/time

and status icons.

③

M

In standby mode, press to enter the Main

Menu list.

Press to select an item, or to save an entry

or setting.

④

+

In menu mode, press to scroll up.

During a call or message playback, press

to increase the volume.

In standby mode, press to access the call

log

(CID)

.

⑤

T

In standby mode, p

ress to make or answer

a call.

During a call, press to send a Flash signal

(also called Recall) for network services.

⑥

*

In standby mode, p

ress and hold to switch

the key lock on or off.

⑦

F

In

standby mode, press to make or answer

a call in speakerphone mode.

During a call or message playback, press

to switch between speakerphone and

earpiece.

⑧

MICROPHONE

⑨

m

Press to cancel an action.

During pre-dialling, press to delete the last

digit entered.

During a call, press to mute the

microphone, and press again to resume

conversation.

⑩

-

In menu mode, press to scroll down.

During a call, or message playback, press

to decrease the volume.

In standby mode, press to access the

phonebook list.

13

⑪

O

During a call, press to

end the call

.

During programming, press to cancel and

exit without making changes.

In standby mode, press and hold to power

the handset on/off.

⑫

#

In standby mode, p

ress and hold to turn the

handset ringer on/off.

Press and hold to add a dialling pause when

dialling or entering numbers into the

phonebook.

⑬

I

In standby mode or during a call, press to

initiate an intercom call or transfer a call.

⑭

R

In standby mode, press to access the redial

list.

⑮

Lights up in Green when the answering

machine is on.

Flashes if there are new messages.

Flashes rapidly if the answering machine

memory is full.

⑯

Lights up in Red when a handset is on the

base to indicate it is charging.

⑰

Press to find

/

page

all registered handsets.

Press the button again, or any key on the

handset to turn off the page signal.

Press and hold to start registration process.

14

3.2 Display Icons and Symbols on the Main Eclipse Handset

The home screen of the Main Eclipse Handset gives you information on

the current status of the phone.

Icon

Meaning

Displays when the battery is fully charged.

Internal segments cycle while charging.

Displays when the line is in use.

Flashes when there is an incoming call.

Flashes when you have a new voicemail message.

(This is

a caller display service and is not usually available from

UK network providers.)

Displays when you have new missed calls, or the call log

is being viewed.

Displays when the phonebook is

accessed.

Displays when the alarm is set.

Displays when handset ringer is turned off.

15

Displays when the handset is registered and within

range of the base station.

Flashes when the handset is out of range and is

searching for a base.

Displays

when the answering machine is on.

Flashes slowly when there are new answering machine

message(s) or when the answering machine memory is

full.

Turns on when confirmation of selection or programming

is available.

Turns on during phonebook editing mode

to delete the

last digit.

Turns on during menu mode when you can return to the

previous state or previous step.

Turns on when the screen display is on.

16

3.3 Overview of the Additional Handset and Charging Pod (for

ECLIPSE-2 / -3 / -4 models only)

⑮

⑬

⑩

⑭

①

②

③

⑤

⑥

⑦

⑧

⑨

⑪

⑫

④

17

①

EARPIECE

②

LCD DISPLAY

Displays menus, phone numbers,

handset name and status icons.

③

M

In standby mode, press to enter the

Main Menu list.

Press to select an item, or to save an

entry or setting.

④

+

In menu mode, press to scroll up.

During a call or message playback,

press to increase the volume.

In standby mode, press to access the

call log (CID).

⑤

I

n standby mode, p

ress to make or

answer a call.

during a call, press to send a flash

signal (also called recall) from

network service

.

⑥

*

In standby mode, press and hold to

switch the key lock on or off.

⑦

During a call

or

message playback

,

press to switch between

speakerphone and earpice

.

⑧

MICROPHONE

⑨

m

Press to cancel an action.

During pre-dialling, press to delete

the last digit entered.

During a call, press to mute the

microphone, and press again to

resume

conversation.

⑩

-

In menu mode, press to scroll down.

During a call, or message playback,

press to decrease the volume.

In standby mode, press to access the

phonebook list.

18

⑪

O

During a call, press to end the call.

During programming, press to cancel

and exit without making changes.

In standby mode, press and hold to

power the handset on/off.

⑫

#

In standby mode, press and hold to

turn the handset ringer on/off.

Press and hold to add a dialling

pause when dialling or entering

numbers into the phonebook.

⑬

I

In standby mode or during a call,

press to initiate an intercom call or

transfer a call.

⑭

R

In standby mode, press to access the

redial list.

⑮

Lights up in Red when a handset is

on the charging pod to indicate it is

charging.

19

3.4 Display Icons and Symbols on the Additional Handsets (for

ECLIPSE-2 / -3 / -4 models only)

The home screen of the additional handsets gives you information on the

current status of the phone.

Icon

Meaning

Displays

when the battery is almost empty.

Displays when the battery is fully charged.

Blinks (3s on / 1s off) when the battery is partly discharged.

Flashes (1s on / 1s off) when the battery level is low.

Displays when the line is in use.

Flashes when there

is an incoming call.

Flashes when you have a new voicemail message.

(This is a

caller display service and is not usually available from UK

network providers.)

Displays when you have new missed calls, or the call log is

being viewed.

Displays

when the phonebook is accessed.

Displays when the alarm is set.

Displays when handset ringer is turned off.

Displays when the handset is registered and within

range of

the base station.

Flashes when the handset is out of range and is searching

for a base.

La page est en cours de chargement...

Binatone Eclipse Plus-4 Manuel utilisateur

Ce manuel convient également à

Binatone Eclipse Plus-4 Manuel utilisateur

dans d''autres langues

Documents connexes

Autres documents