Audio-Technica ATH-AR3BT White Manuel utilisateur

User Manual

Wireless Headphones

Manuel de l’utilisateur

Casque sans fil

Bedienungsanleitung

Kabellose Kopfhörer

Manuale dell’utente

Cuffie wireless

Manual de usuario

Auriculares inalámbricos

Manual do Usuário

Fones de Ouvido Sem Fio

Руководство пользователя

Беспроводные наушники

사용설명서

무선 헤드폰

用户手册

无线头戴式耳机

使用說明書

無線耳機

ATH-AR3BT

ATH-AR3BT_UM_V2_10L_book.indb 1 2017/02/10 9:21

1

Thank you for purchasing this Audio-Technica product.

Before using the product, read through this user manual to ensure that you will use the product correctly.

Please keep this manual for future reference.

Introduction

Safety precautions

Cautions for the product

• Do not use the product near medical equipment. Radio waves

may affect cardiac pacemakers and medical electronic

equipment. Do not use the product inside medical facilities.

• When using the product in aircraft, follow airline instructions.

• Do not use the product near automatic control devices such as

automatic doors and fire alarms. Radio waves may affect

electronic equipment and cause accidents due to malfunction.

• Do not disassemble, modify or attempt to repair the product to

avoid electric shock, malfunction or fire.

• Do not subject the product to strong impact to avoid electric

shock, malfunction or fire.

• Do not handle the product with wet hands to avoid electric

shock or injury.

• Disconnect the product from a device if the product begins to

malfunction, producing smoke, odor, heat, unwanted noise or

showing other signs of damage. In such a case, contact your

local Audio-Technica dealer.

• Do not allow the product to get wet to avoid electric shock or

malfunction.

• Do not put foreign matter such as combustible materials,

metal, or liquid in the product.

• Do not cover the product with a cloth to avoid fire or injury by

overheating.

• Follow applicable laws regarding mobile phone and headphone

use if using headphones while driving.

• Do not use the product in places where the inability to hear

ambient sound presents a serious risk (such as at railroad

crossings, train stations, and construction sites).

• To prevent damage to your hearing, do not raise the volume

too high. Listening to loud sound for an extended period may

cause temporary or permanent hearing loss.

• Discontinue use if skin irritation results from direct contact

with the product.

• Be careful to avoid pinching yourself between the housing and

the arm of product or at the joints.

ATH-AR3BT_UM_V2_10L_book.indb 1 2017/02/10 9:21

2

Cautions for rechargeable battery

The product is equipped with a rechargeable battery (lithium polymer battery).

• If battery fluid gets into eyes, do not rub them. Rinse

thoroughly with clean water such as tap water and consult a

doctor immediately.

• If battery fluid leaks, do not touch fluid with bare hands. If fluid

remains inside the product, it may cause malfunction. If

battery fluid leaks, contact your local Audio-Technica dealer.

– If fluid gets in your mouth, gargle thoroughly with clean

water such as tap water and consult a doctor immediately.

– If your skin or clothing comes in contact with fluid,

immediately wash the affected skin or clothing with water. If

you experience skin irritation, consult a doctor.

• To avoid leakage, generation of heat or explosion:

– Never heat, disassemble or modify the battery, nor dispose

of it in a fire.

– Do not attempt to pierce with a nail, hit with a hammer or

step on the battery.

– Do not drop the product or subject it to strong impact.

– Do not get the battery wet.

• Do not use, leave or store the battery in the following places:

– Area exposed to direct sunlight or high temperatures and

humidity

– Inside of a car under the blazing sun

– Near heat sources such as heat registers

• Charge only with the included USB cable to avoid malfunction

or fire.

• The internal rechargeable battery of this product cannot be

replaced by the user. The battery may have reached the end of

its service life if the usage time becomes significantly shorter

even after the battery has been fully charged. If this is the

case, the battery needs to be repaired. Contact your local

Audio-Technica dealer for repair details.

• When the product is disposed of, the built-in rechargeable

battery needs to be discarded properly. Contact your local

Audio-Technica dealer to learn how to properly dispose of the

battery.

For customers in the USA

FCC Notice

Warning

This device complies with Part 15 of the FCC Rules.

Operation is subject to the following two conditions: (1)

This device may not cause harmful interference, and (2) this

device must accept any interference received, including

interference that may cause undesired operation.

Caution

You are cautioned that any changes or modifications not

expressly approved in this manual could void your authority

to operate this equipment.

Note: This equipment has been tested and found to comply

with the limits for a Class B digital device, pursuant to part

15 of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference in a

residential installation. This equipment generates, uses and

can radiate radio frequency energy and, if not installed and

used in accordance with the instructions, may cause

harmful interference to radio communications. However,

there is no guarantee that interference will not occur in a

particular installation. If this equipment does cause harmful

interference to radio or television reception, which can be

determined by turning the equipment off and on, the user is

encouraged to try to correct the interference by one or more

of the following measures:

– Reorient or relocate the receiving antenna.

– Increase the separation between the equipment and

receiver.

– Connect the equipment to an outlet on a circuit different

from that to which the receiver is connected.

– Consult the dealer or an experienced radio/TV technician for

help.

RF Exposure Statement

This transmitter must not be co-located or operated in

conjunction with any other antenna or transmitter used in

other systems. This device complies with FCC radiation

exposure limits set forth for an uncontrolled environment

and meets the FCC radio frequency (RF) Exposure

Guidelines. This equipment has very low levels of RF energy

that is deemed to comply without testing of specific

absorption rate (SAR).

For customers in Canada

IC statement

CAN ICES-3 (B)/NMB-3(B)

This device complies with INDUSTRY CANADA R.S.S. 247.

Operation is subject to the following conditions: (1) This

device may not cause harmful interference, and (2) this

device must accept any interference received, including

interference which may cause undesired operation.

Under Industry Canada regulations, this radio transmitter

may only operate using an antenna of a type and maximum

(or lesser) gain approved for the transmitter by Industry

Canada. To reduce potential radio interference to other

users, the antenna type and its gain should be so chosen

that the equivalent isotropically radiated power (e.i.r.p.) is

not more than that necessary for successful

communication.

This device complies with RSS-102 radiation exposure limits

set forth for an uncontrolled environment.

Safety precautions

ATH-AR3BT_UM_V2_10L_book.indb 2 2017/02/10 9:21

3

Notes on use

• Be sure to read the connected device’s user manual before use.

• Audio-Technica will not be liable in any way for any loss of data in

the unlikely event that such losses should occur while using the

product.

• On public transportation or in other public places, keep the

volume low so as not to disturb other people.

• Minimize the volume on your device before connecting the

product.

• When using the product in a dry environment, you may feel a

tingling sensation in your ears. This is caused by static electricity

accumulated on your body, not by product malfunction.

• Do not subject the product to strong impact.

• Do not store the product in direct sunlight, near heating devices,

or in hot, humid, or dusty places. Additionally, do not allow the

product to get wet.

• When the product is used for a long time, the product may

become discolored due to ultraviolet light (especially direct

sunlight) and wear.

• If the product is placed in a bag while the included cable or USB

charging cable is still connected, the included cable or USB

charging cable may become caught, severed, or broken.

• Make sure to hold the plug when connecting and disconnecting

the included cable or USB charging cable. The included cable or

USB charging cable may become severed or an accident may

occur if you pull on the cable itself.

• When you are not using the included cable or USB charging

cable, disconnect it from the product.

• This product can be used to talk on the phone only when using a

mobile telephone network. Support for telephony apps that use a

mobile data network is not guaranteed.

• If you use the product near an electronic device or transmitter

(such as a mobile phone), unwanted noise may be heard. In this

case, move the product away from the electronic device or

transmitter.

• If you use the product near a TV or radio antenna, noise may be

seen or heard in the television or radio signal. In this case, move

the product away from the TV or radio antenna.

• To protect the built-in rechargeable battery, charge it at least once

every 6 months. If too much time passes between charges, the

life of the rechargeable battery may be reduced, or the

rechargeable battery may no longer be able to be charged.

ATH-AR3BT_UM_V2_10L_book.indb 3 2017/02/10 9:21

4

Part names and functions

Headband

Earpad

Slider

Housing

Left/Right (L/R)

indicator

N-Mark

Shows the location for

detecting NFC.

■ Included accessories

Power switch

Turns the power on

and off.

Detachable cable for smartphones

(1.2 m (3.9') / 3.5 mm (1/8") gold-plated

stereo mini-plug (4 pole/L-shaped))

Indicator lamp

Displays the operating status

and battery level of the product.

USB connector jack

Used to connect the included USB

charging cable and charge the product.

A microphone is built into

the left (L) housing.

Jog switch

Allows you to adjust the volume, play or pause music

and videos, and perform phone call operations.

Connector jack

Used to connect the included cable

and use the playthrough function.

USB charging cable

(1.0 m (3.3'))

ArmJoint

ATH-AR3BT_UM_V2_10L_book.indb 4 2017/02/10 9:21

5

Charging the battery

• Fully charge the battery when using for the first time.

• When the rechargeable battery is running low, the product will sound 2 sets of 2 beeps and the indicator lamp will

ﬂash in red. When these beeps sound, charge the battery.

• It takes about 5 hours to charge the battery fully. (This time may vary depending on usage conditions.)

• While the battery is charging, the product’s

Bluetooth

connection remains disabled and therefore the product’s

Bluetooth

feature cannot be used.

1. Connect the included USB charging cable (micro USB Type B) to the product’s USB connector jack.

USB connector jack

USB port

USB Type A

USB charging cable

(included)

Micro USB Type B

Computer

2. Connect the included USB charging cable (USB Type A) to the computer to start charging.

• During charging, the indicator lamp lights as follows:

Lit in red : Charging

Lit in blue : Charging complete

3. When charging is complete, disconnect the included USB charging cable (USB Type A) from the computer.

4. Disconnect the included USB charging cable (micro USB Type B) from the product’s USB connector jack.

ATH-AR3BT_UM_V2_10L_book.indb 5 2017/02/10 9:21

6

Connecting via

Bluetooth

wireless technology

About pairing

To connect the product to a

Bluetooth

device, the product needs to pair (register) with the device. Once they are

paired, you do not need to pair them again.

However, you will need to pair again in the following cases:

• If the product is deleted from the

Bluetooth

device’s connection history.

• If the product is sent out for repair.

• If the product is paired with 9 devices or more.

(The product can be paired with up to 8 devices. When you pair with a new device after pairing with 8 devices, pairing

information for the device with the oldest connection date will be overwritten by the information for the new device.)

Pairing a

Bluetooth

device

• Read the user manual for the

Bluetooth

device.

• Place the device within 1 m (3.3') of the product to perform pairing correctly.

• To confirm the progress of the pairing process, wear the product while performing this procedure and listen for the

confirmation tone.

1. Starting with the product turned off, slide the power switch to the “ON”

position.

• The indicator lamp will light in blue, and then flash in red and blue.

• The product sounds a confirmation tone when pairing begins.

2. Use your

Bluetooth

device to begin the pairing process and search for the product.

• For information about using your

Bluetooth

device, refer to the device’s user manual.

3. Select “ATH-AR3BT” to pair the product and your

Bluetooth

device.

• Some devices may ask for a passkey. In this case, enter “0000”. The passkey

may also be called a passcode, PIN code, PIN number, or password.

• The product sounds a confirmation tone when pairing is complete.

ATH-AR3BT

MY DEVICES

Settings Bluetooth

Bluetooth

ATH-AR3BT_UM_V2_10L_book.indb 6 2017/02/10 9:21

7

Connecting via

Bluetooth

wireless technology

Using NFC when pairing

NFC (Near Field Communication) is a technology that allows for short-range wireless communication between various

devices, such as mobile phones and IC tags. It allows two devices to communicate when you simply touch them to

each other. You can use NFC to pair your

Bluetooth

device with this product.

Compatible devices : NFC-compatible

Bluetooth

devices

Compatible OS : Android

Pairing an NFC-compatible

Bluetooth

device

To confirm the progress of the pairing process, wear the product while performing this procedure and listen for the

confirmation tone.

1. Turn on your NFC-compatible device’s NFC feature.

• Refer to your NFC-compatible device’s user manual as necessary.

2. Starting with the product turned off, slide the power switch to the

“ON” position.

3. Touch your NFC-compatible device to the N-Mark on the product, and

then use your NFC-compatible device to complete the pairing process.

• For the location of your NFC-compatible device’s NFC antenna, or

how to end the connection between the product and your device,

refer to the device’s user manual.

• The product sounds a confirmation tone when pairing is complete.

Disconnecting a device

Touch your NFC-compatible

Bluetooth

device to the part just above the N-Mark on the product again to disconnect the

product from your device.

Switching the device

• If the product is connected to a

Bluetooth

device and you then touch an NFC-compatible

Bluetooth

device to it, the

product will connect to the second device.

• If you have an NFC-compatible

Bluetooth

device connected with the product and touch that device to another

NFC-compatible

Bluetooth

device, the device will disconnect from the product and connect with the second NFC-

compatible

Bluetooth

device.

ATH-AR3BT_UM_V2_10L_book.indb 7 2017/02/10 9:21

8

Indicator lamp display

The product’s indicator lamps indicate the product’s status as explained below.

Status

Indicator lamp display pattern

Red Blue

Pairing Searching for device

FlashingConnection

Waiting to be connected

Connecting

Battery level Battery level low

Charge

Charging

Lit

Charging complete

Lit

ATH-AR3BT_UM_V2_10L_book.indb 8 2017/02/10 9:21

9

Using the product

The product can use

Bluetooth

wireless technology to connect to your device and play music, receive phone calls,

etc. Use the product for whichever of these purposes suits your needs. Note that Audio-Technica cannot guarantee

compatible operation with connected

Bluetooth

devices.

Power supply

Power supply Switch operation Indicator lamp

ON

*1

Lights in red and blue simultaneously

(appears purple), then flashes in red

and blue*

2

OFF

*1

Lights in red and blue simultaneously

(appears purple), then turns off

*1 If you are wearing the product, you will hear a beep to indicate when the product has turned on and off.

*2 It may take several seconds for the indicator lamp to light.

Wearing the product

Place the product with the side marked “L” over your left ear and the side marked “R” over

your right ear, and adjust the headband length by sliding the adjustable slider so that the

earpads cover your ears.

Folding compactly

Using the joint as a fulcrum, the housing can be folded into the headband.

• When folding the product, detach the included cable.

• Be careful not to pinch your fingers, etc. in the joint.

• Be sure to return the housing to its original position before using the product.

Joints

Fold

Unfold

ATH-AR3BT_UM_V2_10L_book.indb 9 2017/02/10 9:21

10

Using the product

Listening to audio

• To connect for the first time, pair the product and your device by using either the

Bluetooth

wireless technology or

NFC. If you have already paired the product and your

Bluetooth

device, turn on the product and turn on your device’s

Bluetooth

connection.

• Use your

Bluetooth

device to start playback, referring to the device’s user manual as necessary.

Jog switch

Press Plays or pauses music and video playback.*

1

Press and hold

Depending on the connected device, activates the device’s speech

recognition feature (such as Siri for compatible iOS devices).

Slide toward +

Slide and release Increases the volume by 1 level.*

2

Slide and hold (about 2 seconds) Plays the next track.*

1

Slide toward −

Slide and release Decreases the volume by 1 level.*

2

Slide and hold (about 2 seconds) Plays the previous track.*

1

*1 Some controls may not be available for music and video playback on some smartphones.

*2 A confirmation tone sounds each time you slide the jog switch. A low confirmation tone is heard when the volume is at the

maximum or minimum level.

ATH-AR3BT_UM_V2_10L_book.indb 10 2017/02/10 9:21

11

Talking on the phone

• If your

Bluetooth

device supports telephone features, you can use the product’s built-in microphone to talk on the

phone.

• When your

Bluetooth

device receives a phone call, the product sounds a ring tone.

• If a call is received while you are listening to music, music playback is paused. When you finish the call, music

playback resumes.

When

Switch operation Function

Receiving a call

Press the jog switch. Answers the call.

Press and hold the jog switch (about 2

seconds).

Rejects the call.

Talking on a call

Press the jog switch. Ends the call.

Press and hold the jog switch (about 2

seconds).

Each time you press and hold the button (about

2 seconds), you switch the call to your mobile

phone or to the product.*

Slide the jog switch toward + or −. Adjusts the volume of the call.

* When you hear the confirmation tone, release the jog switch.

Using the product

ATH-AR3BT_UM_V2_10L_book.indb 11 2017/02/10 9:21

12

Other functions

Playthrough function

This product features a playthrough function that allows it to be used as a pair of traditional headphones, even if the

battery becomes depleted. To connect the product to your portable player, simply connect the connector plug of the

included cable to the product’s connector jack, and connect the input plug to your portable player.

Connector plug

Connector jack

Input plug

Portable player

Using the remote control with mic for smartphones

Control button

Operation

Control button

Microphone

BackFront

Press the control

button once.

Playback/pause for music/videos

Answering/ending phone calls

• Some smartphones do not support playback and pause functionality for

music/video files.

• Audio-Technica does not provide support for how to use smartphones.

Auto power off function

The product automatically turns off after 5 minutes of not being connected to a device that has its power turned on.

Reset function

If the product does not work or other malfunctions occur, make sure the

product is turned off and then connect the included USB charging cable.

Make sure the cable is carrying power.

Disconnecting and then reconnecting the included USB charging cable will

reset the product and should resolve any problem you are experiencing. If

the problem persists, please contact your local Audio-Technica dealer.

USB

connector jack

Micro USB Type B

ATH-AR3BT_UM_V2_10L_book.indb 12 2017/02/10 9:21

13

Cleaning

Get into the habit of regularly cleaning the product to ensure that it will last for a long time. Do not use alcohol, paint

thinners or other solvents for cleaning purposes.

• To clean, wipe with a dry cloth.

• Wipe away perspiration and any other dirt from the cable with a dry cloth immediately after use. Failure to clean the

cable may cause it to deteriorate and harden over time, resulting in malfunction.

• Wipe the plug with a dry cloth if dirty. Failure to clean the plug may cause the sound to cut out and may cause noise.

• Wipe the earpads and headband with a dry cloth if dirty. Perspiration or water on the earpads or headband may

cause discoloration. Wipe with a dry cloth and allow to dry in the shade.

• If the product will not be used for an extended period of time, store it in a well-ventilated place free from high

temperatures and humidity.

• Earpads are consumable items. They will deteriorate over time due to use and storage, so replace them when

necessary. For information about replacing earpads or other parts, or for information about other serviceable

parts, contact your local Audio-Technica dealer.

ATH-AR3BT_UM_V2_10L_book.indb 13 2017/02/10 9:21

14

Troubleshooting

Problem Solution

Power is not supplied. • Charge the product.

Unable to pair. • Devices that communicate using

Bluetooth

ver. 2.1+EDR or higher can be

used with the product.

• Place the product and the

Bluetooth

device within 1 m (3.3') of each other.

• Set the profiles for the

Bluetooth

device. For procedures on how to set

profiles, refer to the

Bluetooth

device’s user manual.

Unable to pair using NFC. • Make sure your device is an NFC-compatible

Bluetooth

device.

• Turn on your NFC-compatible

Bluetooth

device’s NFC feature.

• Touch the product to the correct location of your NFC-compatible

Bluetooth

device.

• Depending on the NFC-compatible

Bluetooth

device you are using, the NFC

sensitivity may not be strong enough to connect to the product with just

one touch. In this case, refer to the NFC-compatible

Bluetooth

device’s user

manual.

• Depending on the NFC-compatible

Bluetooth

device you are using, it may

take some time to communicate via NFC. Keep the product and your NFC-

compatible

Bluetooth

device touching until the connection is completed.

• Remove your NFC-compatible

Bluetooth

device from its case so that it can

communicate via NFC.

No sound is heard / Sound is faint. • Turn on the power of the product and the

Bluetooth

device.

• Turn up the volume of the product and the

Bluetooth

device.

• If the

Bluetooth

device is set to the HFP/HSP connection, switch to the A2DP

connection.

• Remove obstacles between the product and the

Bluetooth

device and place

them closer together.

• Switch the output of the

Bluetooth

device to the

Bluetooth

connection.

Sound is distorted / Noise is heard

/ Sound cuts out.

• Turn down the volume of the product and the

Bluetooth

device.

• Keep microwaves and other devices such as wireless routers away from the

product.

• Keep TVs, radios, and devices with built-in tuners away from the product.

These devices can also be affected by the product.

• Turn off the equalizer settings of the

Bluetooth

device.

• Remove obstacles between the product and the

Bluetooth

device and place

them closer together.

Sound cuts out when using the

aptX codec.

• Adjust your

Bluetooth

device’s settings to disable the aptX codec.

Cannot hear the voice of the caller

/ Voice of the caller is too quiet.

• Turn on the power of the product and the

Bluetooth

device.

• Turn up the volume of the product and the

Bluetooth

device.

• If the

Bluetooth

device is set to the A2DP connection, switch to the HFP/HSP

connection.

• Switch the output of the

Bluetooth

device to the

Bluetooth

connection.

The product cannot be charged. • Securely connect the included USB charging cable and charge the product.

•

For details about how to operate your

Bluetooth

device, refer to the device’s user manual.

•

If the problem still remains, reset the product. To reset the product, refer to “Reset function” (p.12).

ATH-AR3BT_UM_V2_10L_book.indb 14 2017/02/10 9:21

15

Specifications

Communication specifications

Communication system

Bluetooth

version 4.1

Output

Bluetooth

Specification Power Class 2

1.8 mW EIRP

Maximum communication range

Line of sight - approx. 10 m (33')

Frequency band

2.402 GHz to 2.480 GHz

Modulation method

FHSS

Compatible

Bluetooth

profiles

A2DP, AVRCP, HFP, HSP

Support codec

Qualcomm

®

aptX™ audio, AAC, SBC

Supported content protection method

SCMS-T

Transmission band

20 to 20,000 Hz

Headphones

Type

Closed-back dynamic

Driver

40 mm

Sensitivity

97 dB/mW

Frequency response

5 to 35,000 Hz

Impedance

41 ohms

Input jack

3.5 mm (1/8") stereo mini-jack

Microphone (on the cable for smartphones)

Type

Electret condenser

Polar pattern

Omnidirectional

Sensitivity

-44 dB (1 V/Pa, at 1 kHz)

Frequency response

50 to 4,000 Hz

Other

Power supply

DC 3.7 V lithium polymer battery

Charging voltage/current

5 V

200 mA

Charging time

Approx. 5 hours*

Operating time Continuous transmission time including music playback time:

Max. approx. 30 hours*

Continuous standby time: Max. approx. 1,000 hours*

Weight (without cable) Approx. 190 g (6.7 oz)

Operating temperature

5°C to 40°C (41°F to 104°F)

Included accessories Detachable cable for smartphones (1.2 m (3.9') / 3.5 mm (1/8") gold-plated

stereo mini-plug (4 pole/L-shaped)), USB charging cable (1.0 m (3.3'))

Sold separately

Earpads, Cable for smartphones

* The above figures depend on operating conditions.

For product improvement, the product is subject to modification without notice.

ATH-AR3BT_UM_V2_10L_book.indb 15 2017/02/10 9:21

16

Specifications

• The

Bluetooth

®

word mark and logos are owned by Bluetooth SIG, Inc. and any use of such marks by Audio-Technica Corporation is

under license. All other trademarks are property of their respective owners.

• “AAC” logo is a trademark of Dolby Laboratories.

• Qualcomm is a trademark of Qualcomm Incorporated, registered in the United States and other countries, used with permission.

aptX is a trademark of Qualcomm Technologies International, Ltd., registered in the United States and other countries, used with

permission.

• The N-Mark is a trademark or registered trademark of NFC Forum, Inc. in the United States and in other countries.

• Android is a trademark of Google Inc.

ATH-AR3BT_UM_V2_10L_book.indb 16 2017/02/10 9:21

1

Nous vous remercions d’avoir choisi ce produit Audio-Technica.

Avant utilisation, merci de lire attentivement ce manuel pour vous assurer du bon usage du produit.

Veuillez conserver ce manuel pour consultation ultérieure.

Introduction

Consignes de sécurité

Mises en garde concernant le produit

• N’utilisez pas le produit à proximité d’un équipement médical.

Les ondes radio peuvent affecter les stimulateurs cardiaques

et les appareils électroniques médicaux. N’utilisez pas le

produit dans un établissement hospitalier.

• Si vous utilisez le produit dans un avion, conformez-vous aux

instructions de la compagnie aérienne.

• N’utilisez pas le produit à proximité d’appareils à commande

automatique, comme des portes automatiques ou des alarmes

incendie. Les ondes radio peuvent affecter les appareils

électroniques et provoquer des accidents suite à un

dysfonctionnement.

• Ne démontez pas, ne modifiez pas ou n’essayez pas de réparer

le produit pour éviter tout risque d’électrocution, de

dysfonctionnement ou d’incendie.

• Ne soumettez pas le produit à un choc violent pour éviter tout

risque d’électrocution, de dysfonctionnement ou d’incendie.

• Ne manipulez pas le produit avec les mains mouillées pour

éviter tout risque d’électrocution ou de blessure.

• Déconnectez le produit s’il commence à présenter des

dysfonctionnements, à émettre de la fumée, une odeur, de la

chaleur, des bruits indésirables ou à présenter d’autres signes

de dommage. Le cas échéant, prenez contact avec votre

revendeur local Audio-Technica.

• Ne mouillez pas le produit pour éviter tout risque

d’électrocution ou de dysfonctionnement.

• N’introduisez pas de corps étrangers comme des matériaux

combustibles, du métal ou un liquide dans le produit.

• Ne recouvrez pas le produit avec un chiffon car cela entraînerait

un risque d’incendie ou de blessure suite à une surchauffe.

• Respectez les lois en vigueur concernant l’utilisation de

téléphones mobiles et casques si vous utilisez le casque en

conduisant.

• N’utilisez pas le produit dans des endroits où l’incapacité à

entendre les sons ambiants présente un risque grave (tels

qu’un passage à niveau, une gare ferroviaire et des chantiers).

• Pour éviter d’endommager votre ouïe, n’augmentez pas trop le

volume. L’écoute prolongée de sons forts peut provoquer une

perte auditive temporaire ou permanente.

• Cessez d’utiliser le produit en cas d’irritation cutanée

découlant d’un contact direct avec celui-ci.

• Prenez garde de ne pas vous pincer entre la coque et le bras

du produit ou au niveau des jointures.

ATH-AR3BT_UM_V2_10L_book.indb 1 2017/02/10 9:21

2

Mises en garde relative à la batterie rechargeable

Le produit est doté d’une batterie rechargeable (batterie Lithium-Polymère (LiPo)).

• Si le liquide de batterie pénètre dans vos yeux, ne les frottez

pas. Rincez abondamment à l’eau claire, l’eau du robinet par

exemple, et consultez immédiatement un médecin.

•

En cas de fuite du liquide de batterie, ne le touchez pas les mains

nues. Si le liquide reste à l’intérieur du produit, cela peut

provoquer un dysfonctionnement. En cas de fuite du liquide de

batterie, prenez contact avec votre revendeur local Audio-Technica.

– Si le liquide pénètre dans votre bouche, rincez-vous

abondamment la bouche à l’eau claire, l’eau du robinet par

exemple, et consultez immédiatement un médecin.

– Si le liquide entre en contact avec votre peau ou vos

vêtements, lavez immédiatement la zone affectée avec de

l’eau. En cas d’irritation cutanée, consultez un médecin.

• Pour éviter les fuites, l’émission de chaleur ou une explosion:

– Ne jamais chauffer, démonter ou modifier la batterie, ni la

jeter au feu.

– N’essayez pas de percer la batterie avec un clou, de la

frapper avec un marteau ou de marcher dessus.

– Ne laissez pas tomber le produit et ne le soumettez pas à un

impact fort.

– Veillez à ne pas mouiller la batterie.

• Abstenez-vous d’utiliser, laisser ou ranger la batterie dans les

endroits suivants:

– Zone exposée à un ensoleillement direct ou à des

températures ou une humidité élevée(s)

– À l’intérieur d’une voiture sous un soleil de plomb

– Près de sources de chaleur ou d’appareils de chauffage

• La recharge ne doit être faite qu’avec le câble USB fourni pour

éviter un dysfonctionnement ou un incendie.

• L’utilisateur ne peut pas remplacer lui-même la batterie interne

rechargeable de ce produit. Il se peut que la batterie ait atteint

la fin de sa vie utile si la durée d’utilisation raccourcit

considérablement même si la batterie est complètement

chargée. Si tel est le cas, la batterie doit être réparée.

Contactez votre revendeur local Audio-Technica pour les détails

de la réparation.

• Lors de l’élimination du produit, la batterie rechargeable

intégrée doit être mise au rebut de manière appropriée.

Contactez votre revendeur local Audio-Technica pour savoir

comment éliminer correctement la batterie.

À l’attention des clients aux États-Unis

Avis de la FCC

Avertissement

Cet appareil est conforme à la Partie15 du règlement de la FCC.

Son fonctionnement est soumis aux deux conditions suivantes:

(1) Cet appareil ne doit pas causer d’interférence nocive et (2)

cet appareil doit accepter les interférences reçues, y compris les

interférences pouvant provoquer un fonctionnement indésirable.

Mise en garde

Vous êtes averti que tout changement ou modification non

expressément approuvé dans ce manuel est susceptible

d’annuler votre droit d’utilisation de cet appareil.

Remarque:

Cet appareil a fait l’objet de tests afin de vérifier sa

conformité avec les limites relatives aux appareils numériques

de classe B, conformément à la partie 15 du règlement de la

FCC. Ces limites ont pour vocation d’offrir une protection

raisonnable contre les interférences nocives en installation

résidentielle. Cet appareil génère, utilise et peut émettre des

fréquences radioélectriques et provoquer, en cas d’installation

et d’utilisation non conformes aux instructions, des

interférences préjudiciables à la réception des signaux radio.

Toutefois, il n’y a pas de garantie que des interférences ne se

produiront pas dans une installation particulière. Si l’appareil

provoque des interférences préjudiciables à la réception radio ou

télévisée, ce qui peut être déterminé en éteignant et allumant

l’appareil, l’utilisateur est invité à essayer d’y remédier en

prenant une ou plusieurs des mesures suivantes:

– Réorienter ou déplacer l’antenne réceptrice.

– Augmenter la séparation entre l’appareil et le récepteur.

– Brancher l’appareil dans une prise, sur un circuit différent de

celui auquel est raccordé le récepteur.

– Demander de l’aide au revendeur ou à un technicien radio/

TV qualifié.

Déclaration d’exposition aux radiofréquences

Ce transmetteur ne doit pas être placé ou opéré en

conjonction avec tout autre transmetteur ou antenne utilisé

dans d’autres systèmes. Cet appareil est conforme aux

limites d’exposition concernant l’exposition aux radiations

établies par la FCC dans un environnement non contrôlé et

satisfait les directives d’exposition aux radiofréquences (RF)

de la FCC. Cet équipement présentant de très faibles

niveaux d’énergie de radiofréquence, il est considéré

conforme sans tester le débit d’absorption spécifique (DAS).

À l’attention des clients au Canada

Déclaration IC

CAN ICES-3 (B)/NMB-3(B)

Cet appareil est conforme à la norme INDUSTRIE CANADA

CNR247.

Son fonctionnement est soumis aux conditions suivantes:

(1) cet appareil ne doit pas causer d’interférence nocive et

(2) cet appareil doit accepter les interférences reçues, y

compris les interférences pouvant provoquer un

fonctionnement indésirable.

En vertu des règlements d’Industrie Canada, cet émetteur

radio peut uniquement fonctionner avec une antenne de

type et de gain maximum (ou moindre) approuvés pour

l’émetteur par Industrie Canada. Pour éviter que

d’éventuelles interférences radio n’affectent d’autres

utilisateurs, le type d’antenne et son gain doivent être

choisis de sorte que la puissance isotrope rayonnée

équivalente (PIRE) ne soit pas supérieure aux limites

permises pour une communication réussie.

Cet appareil est conforme aux limites d’exposition aux

rayonnements RSS-102 établies pour un environnement non

contrôlé.

Consignes de sécurité

ATH-AR3BT_UM_V2_10L_book.indb 2 2017/02/10 9:21

3

Remarques concernant l’utilisation

• Veillez à lire le manuel de l’utilisateur de l’appareil connecté avant

toute utilisation.

• Audio-Technica ne pourra en aucun cas être tenu responsable des

pertes de données dans le cas peu probable de leur survenue

pendant l’utilisation du produit.

• Dans les transports ou d’autres lieux publics, veillez à baisser le

volume afin de ne pas déranger les autres personnes.

• Baissez le volume au maximum sur votre appareil avant de

connecter le produit.

• Si vous utilisez le produit dans une atmosphère sèche, vous

pouvez ressentir des picotements dans les oreilles. Ceci est dû à

l’électricité statique accumulée sur votre corps et non à un

dysfonctionnement du produit.

• Ne soumettez pas le produit à un impact fort.

• Ne laissez pas le produit exposé à l’ensoleillement direct, près

d’appareils générant de la chaleur ou dans un endroit chaud,

humide ou poussiéreux. Ne laissez pas non plus le casque

exposé aux liquides et aux éclaboussures.

• Si vous utilisez longtemps le produit, il peut se décolorer en

raison de la lumière ultraviolette (particulièrement sous un

ensoleillement direct) et de l’usure.

• Si vous placez le produit dans un sac alors que le câble ou le

câble de recharge USB fourni est encore connecté, le câble ou le

câble de recharge USB fourni peut se coincer, être coupé ou

endommagé.

• Veillez à tenir le câble par la fiche lorsque vous connectez ou

déconnectez le câble ou le câble de recharge USB fourni. Le

câble ou le câble de recharge USB fourni peut se couper ou un

accident peut se produire si vous tirez sur le câble lui-même.

• Si vous n’utilisez pas le câble ou le câble de recharge USB fourni,

déconnectez-le du produit.

• Ce produit peut être utilisé pour parler au téléphone uniquement

si vous utilisez un réseau de téléphone mobile. La prise en charge

d’applications de téléphonie utilisant un réseau de données

mobiles n’est pas garantie.

• Si vous utilisez le produit près d’un appareil électronique ou d’un

émetteur (comme un téléphone mobile), il se peut que vous

entendiez du bruit indésirable. Dans ce cas, éloignez le produit de

l’appareil électronique ou de l’émetteur.

• Si vous utilisez le produit près d’une antenne de télévision ou

radio, du bruit peut être vu ou entendu dans le signal de la

télévision ou de la radio. Dans ce cas, éloignez le produit de

l’antenne de télévision ou radio.

• Pour protéger la batterie rechargeable intégrée, chargez-la au

moins une fois tous les 6 mois. S’il s’écoule trop de temps entre

les recharges, la durée de vie de la batterie rechargeable peut

être réduite, ou la batterie rechargeable risque de ne plus pouvoir

être rechargée.

ATH-AR3BT_UM_V2_10L_book.indb 3 2017/02/10 9:21

La page est en cours de chargement...

Audio-Technica ATH-AR3BT White Manuel utilisateur

Audio-Technica ATH-AR3BT White Manuel utilisateur

dans d''autres langues

Documents connexes

Autres documents