TEAC MC-DX32I Le manuel du propriétaire

77-20DX32I00022

Z

Micro Hi-Fi System

OWNER’S MANUAL

MANUEL DU PROPRIÉTAIRE

MANUAL DEL USUARIO

MC

-

DX32i

ENGLISH

FRANÇAIS

Includes adapters for:

iPod nano

iPod with video

iPod mini

iPod with Click Wheel

iPod with color display

Adapters sold separately:

iPod with dock connector

Comprend des adaptateurs pour:

iPod nano

iPod avec vidéo

iPod mini

iPod avec molette sensitive Click Wheel

iPod avec écran couleur

Adaptateurs vendus séparément:

iPod avec connecteur pour dock

Incluye adaptadores para:

iPod nano

iPod con vídeo

iPod mini

iPod con rueda de clic

iPod con pantalla en color

Adaptadores no incluidos:

iPod con conector para base

ESPAÑOL

2

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,

DO NOT REMOVE COVER (OR BACK). NO USER-

SERVICEABLE PARTS INSIDE. REFER SERVICING TO

QUALIFIED SERVICE PERSONNEL.

The lightning flash with arrowhead symbol, within an

equilateral triangle, is intended to alert the user to the

presence of uninsulated “dangerous voltage” within the

product’s enclosure that may be of sufficient magnitude

to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is

intended to alert the user to the presence of important

operating and maintenance (servicing) instructions in the

literature accompanying the appliance.

IMPORTANT SAFETY INSTRUCTIONS

CAUTION

• Read all of these Instructions.

• Save these Instructions for later use.

• Follow all Warnings and Instructions marked on the audio equipment.

1) Read Instructions — All the safety and operating instructions should

be read before the product is operated.

2) Retain Instructions — The safety and operating instructions should

be retained for future reference.

3) Heed Warnings — All warnings on the product and in the operating

instructions should be adhered to.

4) Follow Instructions — All operating and use instructions should be

followed.

5) Cleaning — Unplug this product from the wall outlet before cleaning.

Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for

cleaning.

6) Attachments — Do not use attachments not recommended by the

product manufacturer as they may cause hazards.

7) Water and Moisture — Do not use this product near water — for

example, near a bath tub, wash bowl, kitchen sink, or laundry tub; in a

wet basement; or near a swimming pool; and the like.

8) Accessories — Do not place this product on an unstable cart, stand,

tripod, bracket, or table. The product may fall, causing serious injury to a

child or adult, and serious damage to the product. Use only with a cart,

stand, tripod, bracket, or table recommended by the manufacturer, or

sold with the product. Any mounting of the product should follow the

manufacturer’s instructions, and should use a mounting

accessory recommended by the manufacturer.

9) A product and cart combination should be moved with

care. Quick stops, excessive force, and uneven surfaces

may cause the product and cart combination to overturn.

10) Ventilation — Slots and openings in the cabinet are provided for

ventilation and to ensure reliable operation of the product and to protect

it from overheating, and these openings must not be blocked or covered.

The openings should never be blocked by placing the product on a bed,

sofa, rug, or other similar surface. This product should not be placed in a

built-in installation such as a bookcase or rack unless proper ventilation is

provided or the manufacturer’s instructions have been adhered to.

11) Power Sources — This product should be operated only from the

type of power source indicated on the marking label. If you are not sure

of the type of power supply to your home, consult your product dealer or

local power company. For products intended to operate from battery

power, or other sources, refer to the operating instructions.

12) Grounding or Polarization — This product may be equipped with a

polarized alternating-current line plug (a plug having one blade wider

than the other). This plug will fit into the power outlet only one way. This

is a safety feature. If you are unable to insert the plug fully into the outlet,

try reversing the plug. If the plug should still fail to fit, contact your

electrician to replace your obsolete outlet. Do not defeat the safety

purpose of the polarized plug.

13) Power-Cord Protection — Power-supply cords should be routed so

that they are not likely to be walked on or pinched by items placed upon

or against them, paying particular attention to cords at plugs,

convenience receptacles, and the point where they exit from the product.

14) Outdoor Antenna Grounding — If an outside antenna or cable

system is connected to the product, be sure the antenna or cable system

is grounded so as to provide some protection against voltage surges and

built-up static charges. Article 810 of the National Electrical Code,

ANSI/NFPA 70, provides information with regard to proper grounding of

the mast and supporting structure, grounding of the lead-in wire to an

antenna discharge unit, size of grounding conductors, location of

antenna-discharge unit, connection to grounding electrodes, and

requirements for the grounding electrode.

Note to CATV system installer:

This reminder is provided to call the CATV system installer’s attention to

Section 820-40 of the NEC which provides guidelines for proper

grounding and, in particular, specifies that the cable ground shall be

connected to the grounding system of the building, as close to the point

of cable entry as practical."

15) Lightning — For added protection for this product during a lightning

storm, or when it is left unattended and unused for long periods of time,

unplug it from the wall outlet and disconnect the antenna or cable

system. This will prevent damage to the product due to lightning and

power-line surges.

16) Power Lines — An outside antenna system should not be located in

the vicinity of overhead power lines or other electric light or power

circuits, or where it can fall into such power lines or circuits. When

installing an outside antenna system, extreme care should be taken to

keep from touching such power lines or circuits as contact with them

might be fatal.

17) Overloading — Do not overload wall outlets, extension cords, or

integral convenience receptacles as this can result in risk of fire or electric

shock.

18) Object and Liquid Entry — Never push objects of any kind into this

product through openings as they may touch dangerous voltage points or

short-out parts that could result in a fire or electric shock. Never spill

liquid of any kind on the product.

19) Servicing — Do not attempt to service this product yourself as

opening or removing covers may expose you to dangerous voltage or

other hazards. Refer all servicing to qualified service personnel.

20) Damage Requiring Service — Unplug this product from the wall

outlet and refer servicing to qualified service personnel under the

following conditions:

a ) when the power-supply cord or plug is damaged.

b ) if liquid has been spilled, or objects have fallen into the product.

c ) if the product has been exposed to rain or water.

d ) if the product does not operate normally by following the operating

instructions. Adjust only those controls that are covered by the operating

instructions as an improper adjustment of other controls may result in

damage and will often require extensive work by a qualified technician to

restore the product to its normal operation.

e ) if the product has been dropped or damaged in any way.

f ) when the product exhibits a distinct change in performance _ this

indicates a need for service.

21) Replacement Parts — When replacement parts are required, be

sure the service technician has used replacement parts specified by the

manufacturer or have the same characteristics as the original part.

Unauthorized substitutions may result in fire, electric shock, or other

hazards.

22) Safety Check — Upon completion of any service or repairs to this

product, ask the service technician to perform safety checks to determine

that the product is in proper operating condition.

23) Wall or Ceiling Mounting — The product should be mounted to a

wall or ceiling only as recommended by the manufacturer.

24) Heat — The product should be situated away from heat sources such

as radiators, heat registers, stoves, or other products (including

amplifiers) that produce heat.

ANTENNA

LEAD IN

WIRE

ANTENNA

DISCHARGE UNIT

(NEC SECTION 810-20)

GROUNDING CONDUCTORS

(NEC SECTION 810-21)

GROUND CLAMPS

POWER SERVICE GROUNDING

ELECTRODE SYSTEM

(NEC ART 250. PART H)

NEC - NATIONAL ELECTRICAL CODE

ELECTRIC

SERVICE

EQUIPMENT

Example of Antenna Grounding

as per National Electrical

Code, ANSI/NFPA 70

GROUND

CLAMP

3

ENGLISH

This product has been designed and manufactured according to

FDA regulations “title 21, CFR, chapter 1, subchapter J, based on

the Radiation Control for Health and Safety Act of 1968“, and is

classified as class 1 laser product. There is not hazardous invisible

laser radiation during operation because invisible laser radiation

emitted inside of this product is completely confined in the

protective housings.

The label required in this regulation is shown

①.

WARNING: TO PREVENT FIRE OR SHOCK

HAZARD, DO NOT EXPOSE THIS APPLIANCE

TO RAIN OR MOISTURE.

This equipment has been tested and found to comply with the

limits for a Class B digital device, pursuant to Part 15 of the

FCC Rules. These limits are designed to provide reasonable

protection against harmful interference in a residential

installation. This equipment generates, uses, and can radiate

radio frequency energy and, if not installed and used in

accordance with the instructions, may cause harmful

interference to radio communications. However, there is no

guarantee that interference will not occur in a particular

installation. If this equipment does cause harmful interference

to radio or television reception, which can be determined by

turning the equipment off and on, the user is encouraged to

try to correct the interference by one or more of the following

measures:

• Reorient or relocate the equipment and/or the receiving

antenna.

• Increase the separation between the equipment and

receiver.

• Connect the equipment into an outlet on a circuit different

from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician

for help.

CAUTION

Changes or modifications to this equipments not expressly

approved by TEAC CORPORATION for compliance will void the

user’s warranty.

For U.S.A.

Optical pickup:

Type : SF-P200Z

Manufacturer : SANYO Electric Co., Ltd

Laser output : Less than 0.5 mW on the objective lens

Wavelength : 765 - 815 nm

For U.S.A.

①

Rear panel of the Subwoofer

CAUTION

< Do not expose this apparatus to drips or splashes.

< Do not place any objects filled with liquids, such as vases, on

the apparatus.

< Do not install this apparatus in a confined space such as a

book case or similar unit.

< The apparatus draws nominal non-operating power from the

AC outlet with its STANDBY/ON switch in the standby

position.

< The apparatus should be located close enough to the AC

outlet so that you can easily grasp the power cord plug at any

time.

< An apparatus with Class ! construction shall be connected to

an AC outlet with a protective grounding connection.

< Batteries (battery pack or batteries installed) shall not be

exposed to excessive heat such as sunshine, fire or the like.

< Excessive sound pressure from earphones and headphones

can cause hearing loss.

< DO NOT REMOVE THE EXTERNAL CASES OR CABINETS TO

EXPOSE THE ELECTRONICS. NO USER SERVICEABLE PARTS

ARE WITHIN!

< IF YOU ARE EXPERIENCING PROBLEMS WITH THIS PRODUCT,

CONTACT TEAC FOR A SERVICE REFERRAL. DO NOT USE THE

PRODUCT UNTIL IT HAS BEEN REPAIRED.

< USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF

PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY

RESULT IN HAZARDOUS RADIATION EXPOSURE.

AC POWER CORD CONNECTION

CAUTION:

TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG

TO WIDE SLOT, FULLY INSERT.

CORDE DE CONNEXION CA

ATTENTION:

POUR ÉVITER LES CHOCS ÉLECTRIQUES, INTRODUIRE LA LAME

LA PLUS LARGE DE LA FICHE DANS LA BORNE

CORRESPONDANTE DE LA PRISE ET POUSSER JUSQU’AU FOND.

For CANADA

Pour le CANADA

4

Contents

Thank you for choosing TEAC. Read this manual carefully

to get the best performance from this unit.

Important Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Before Using the Unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Discs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Connection. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Unit Functions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Wall Mounting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Remote Control Unit. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Getting started . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Basic Operation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Listening to iPod . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

Listening to CD. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

Repeat Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

Shuffle Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

Programmed Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

Listening to an External Source . . . . . . . . . . . . . . . . . . . . . . . . 20

Listening to the Radio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

Preset Tuning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

Setting the Clock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

Setting the Timer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

Before Using the Unit

trademark of New Transducers Ltd.

Read this before operation

< As the unit may become warm during operation, always leave

sufficient space around the unit for ventilation.

The ventilation holes should not be covered. Make sure there

is at least 5 cm of space on each side of the unit. Do NOT

place anything on top of the unit.

< The voltage supplied to the unit should match the voltage as

printed on the rear panel. If you are in any doubt regarding

this matter, consult an electrician.

< Choose the installation location of your unit carefully. Avoid

placing it in direct sunlight or close to a source of heat. Avoid

locations subject to vibrations and excessive dust, heat, cold

or moisture.

< Do not place the unit on any other electronic components.

< Do not open the cabinet as this might result in damage to the

circuitry or electrical shock. If a foreign object should fall into

the unit, contact your dealer or service company as soon as

possible.

< When removing the power plug from a wall outlet, always

pull directly on the plug. Do not pull on the line cord.

< To keep the laser pickup clean, do not touch it and always

close the CD door after each use.

< Do not attempt to clean the unit with chemical solvents as

this might damage the finish. Use a clean, dry, lint-free cloth.

< Keep this manual in a safe place for future reference.

CAUTION: DO NOT MOVE THE UNIT DURING PLAYBACK

During playback, the disc rotates at high speeds. Do NOT lift

or move the unit during playback. Doing so may damage the

disc or the unit.

WHEN MOVING THIS UNIT

When changing places of installation or packing the unit for

moving, be sure to remove the disc. Moving this unit with the

disc loaded may result in malfunction or other damage.

5

ENGLISH

Discs

Discs which can be played on this unit:

• Conventional audio CDs bearing the COMPACT DISC

DIGITAL AUDIO logo on the label:

• Properly finalized CD-R and CD-RW discs

Note:

< Depending on the quality of the disc and/or the condition of

the recording, some CD-R/CD-RW discs may not be playable.

< Copy-protected discs and other discs that do not conform to

the CD standard may not play back correctly in this player. If

you use such discs in this unit, TEAC Corporation and its

subsidiaries cannot be responsible for any consequences or

guarantee the quality of reproduction. If you experience

problems with such non-standard discs, you should contact

the producers of the disc.

How to remove the disc How to hold the disc

< Always place the disc on the disc tray with the label side up.

(Compact discs can be played or recorded only on one side.)

< To remove a disc from its storage case, press down on the

center of the case and lift the disc out, holding it carefully by

the edges.

< CD-R and CD-RW discs are more sensitive to the effects of

heat and ultraviolet rays than ordinary CDs. It is important

that they are not stored in a location with direct sunlight and

keep your discs away from sources of heat such as radiators

or heat-generating electrical devices.

< Printable discs aren’t recommended because the label side

might be sticky (or contain glue), which will damage the unit.

< Do not stick papers or protective sheets on the discs and do

not use any protective coating spray.

< Use a soft oil-based felt-tipped pen to write information on

the label side of a disc. Never use a ball-point or hard-tipped

pen, as this may cause damage to the recorded side of the

disc.

< Never use a stabilizer. Using commercially available CD

stabilizers with this unit will damage the mechanisms and

cause them to malfunction.

< Do not use irregular shape CDs (octagonal, heart shaped,

business card size, etc.). CDs of this sort can damage the unit:

< If you are in any doubt as to the care and handling of any

disc, read the precautions supplied with the disc, or contact

the disc manufacturer directly.

< Should the disc become dirty, wipe the surface from the

center hole outward towards the outer edge with a soft, dry,

lint-free cloth:

< Never use chemicals such as record (LP) sprays, antistatic

sprays or fluids, benzine or thinner to clean the discs. Such

chemicals will do irreparable damage to the disc’s plastic

surface.

< Discs should be returned to their cases after each use to avoid

dust and scratches that may eventually cause your disc to

skip.

< Do not expose discs to direct sunlight, high humidity, or high

temperatures for extended periods. Long exposure to high

temperatures will warp the disc.

< Do not play any disc that is warped, scratched, deformed or

damaged. Playing such discs may cause irreparable harm to

the playback mechanism.

6

Connection

B

A

C

G H I J

E

DD

F

S-VIDEO

IN

VIDEO

IN

CAUTION

< Turn off the power of all the equipment before making connections.

< Read instructions of each component you intend to use with this unit.

< Be sure to insert each plug securely. To prevent hum and noise, do not bundle the connection cords with the power cord.

Speaker (R) Speaker (L)

Side panel of the main unit

Subwoofer

TV (monitor)

Rear panel of the main unit

7

ENGLISH

AC Power Cord

Be sure to connect the power cord to an AC outlet which

supplies the correct voltage.

Hold the power plug when plugging or unplugging the

power cord. Never pull or yank on the power cord.

POWER switch of the Subwoofer

Use this switch to turn the system on or off.

< If the power switch of the subwoofer turned off, the

settings kept in memory (clock, preset stations, timer

setting) will be erased.

To avoid loosing your settings, it is advisable to keep this

switch ON when not in use.

Headphones

For private listening, first reduce the volume level to

minimum. Then insert the plug from your headphones into

the PHONES jack, and adjust the volume using the VOLUME

buttons. The sound from the speakers is cut off while the

headphone jack is inserted.

CAUTION

Always lower the volume level prior to plugging in your

headphones. TO AVOID DAMAGING YOUR HEARING - Do

not place your headphones on your head until after you

have plugged them in.

AUX IN

You can connect a portable audio player to this jack.

Connect the LINE OUT or PHONES jack (audio output jack)

of the player using the supplied stereo mini plug cable.

When using the PHONES jack of your mini player, you must

adjust the volume of the mini-player or you may hear no

sound from your MC-DX32i.

VIDEO OUT terminal

This terminal outputs video signal from iPod.

Use an RCA (pin) video cable to connect the Dock to the

composite video connector of a television or monitor.

S-VIDEO OUT terminal

This terminal outputs video signal from iPod.

Use an S-Video cable to connect the Dock to the S-Video

input of a suitably equipped television or monitor. Use this

connection in preference to a composite video connection.

J

I

H

G

F

E

AM loop antenna

Position the antenna for the best sound.

If you want, you can hook the AM antenna on a wall as

shown below:

A

FM antenna

While in FM mode, tune in an FM station and extend the

lead to find the best position for reception. This antenna

may need to be repositioned if you move your unit to a new

location.

FM Outdoor Antenna

In an area where FM signals are weak, it will be necessary to

use a 75-ohm unbalanced-type outdoor FM antenna using

an optional (not supplied) matching transformer connected

to an external antenna. Generally, a 3-element antenna will

be sufficient; if you live in an area where the FM signals are

particularly weak, it may be necessary to use one with 5 or

more elements.

B

Outdoor FM Antenna (75Ω)

Subwoofer

Connect the “TO SUBWOOFER” and the “FROM MAIN”

sockets using the supplied cable.

< Connect the Connectors in the direction as figured.

SPEAKERS

Connect the left speaker’s plug to L, and the right speaker’s

plug to R.

< If not using the included speakers, make sure the speakers

you use are at least 4 Ω impedance.

< Do not connect anything other than speakers to these

terminals.

D

C

8

Unit Functions

G

J

E

Q

T

R

H

M

L

G

F

H

I

J

K

U

Z

V

X

Y

B

A

S

M

CBA D E

L

N

OP

K

W

Note:

To simplify explanations, instructions in this manual refer to

the names of the buttons and controls on the front panel

only. Associated controls on the remote control will also

operate similarly.

9

ENGLISH

SKIP (.//) / TUNING

In iPod or CD mode, momentarily press this button to skip

tracks. Hold down this button to search for a part of a track.

In TUNER mode, momentarily press this button to tune in

stations.

In Standby mode, these buttons are used to set or adjust the

clock and the timer.

PLAY/PAUSE (y/J)

In iPod or CD mode, use this button to start or pause

playback.

SHUFFLE

In CD mode, use this button to turn on and off the shuffle

playback.

< This button doesn’t work in iPod mode.

REPEAT

In CD mode, use this button to set the repeat function.

< This button doesn’t work in iPod mode.

MEMORY/TIME SET

In CD mode, use this button to program tracks.

In TUNER mode, use this button to preset stations.

This button is also used for clock adjustment.

Display

STANDBY/ON ( )

Use this button to turn the unit on or standby.

The main unit is powered via the subwoofer. You need to first

turn on the subwoofer.

When the main unit is in the standby mode, the power

indicator of the Subwoofer is orange.

When the unit is turned on, the indicator turns blue.

FUNCTION

Use this button to select a source (iPod, CD, TUNER or AUX).

OPEN/CLOSE

In CD mode, use this button to open and close the CD door.

FM/AM

Use this button to select AM or FM.

FM MODE

In FM TUNER mode, use this button to select STEREO or

MONO.

STOP (H)

In CD mode, use this button to stop playback.

< This button doesn’t work in iPod mode.

VOLUME

Press the up “+” or the down “–” button to adjust the

volume.

M

L

K

J

I

H

G

F

E

D

C

B

A

Dock connector

Before use, insert an appropriate Dock adapter in the Dock

(see page 11).

Insert an iPod mobile digital device into this dock.

CD door

Remote Sensor

When operating the remote control unit, point it towards

here.

PRESET/SCROLL

In TUNER mode, use these buttons to select a preset station.

In iPod mode, use these buttons to scroll up and down the

menu.

MENU

This button is equivalent to the MENU button on your iPod.

In iPod mode, use this button to go back to the previous

menu.

TREBLE

Use this button and the VOLUME buttons to adjust the level

of high frequency sound range.

BASS

Use this button and the VOLUME buttons to adjust the level

of low frequency sound range.

SLEEP

Use this button to set sleep timer.

TIMER

Use this button together with the SKIP buttons to set the

timer.

SHUFFLE

In iPod or CD mode, use this button to turn on and off the

shuffle playback.

REPEAT

In iPod or CD mode, use this button to set the repeat

function.

SELECT

This button is equivalent to the Center button on your iPod.

In iPod mode, use this button to confirm selection in menus.

MUTING

Use this button to mute the sound.

Z

Y

X

W

V

U

T

S

R

Q

P

O

N

10

Wall Mounting Remote Control Unit

1. Remove the battery compartment cover.

2. Put in the lithium battery (CR2032, 3V).

3. Close the cover.

Battery Replacement

If the distance required between the remote control unit and

main unit decreases, the battery is exhausted. In this case,

replace the battery with a new one.

Precautions concerning batteries

Do not heat or disassemble batteries and never dispose of old

batteries by throwing them in a fire.

The provided Remote Control Unit allows the unit to be operated

from a distance.

When operating the remote control unit, point it towards the

remote sensor on the front panel of the unit.

< Even if the remote control unit is operated within the effective

range, remote control operation may be impossible if there

are any obstacles between the unit and the remote control.

< If the remote control unit is operated near other products

which generate infrared rays, or if other remote control

devices using infrared rays are used near the unit, it may

operate incorrectly. Conversely, the other products may also

operate incorrectly.

Battery Installation

1

2

3

You can mount the left and right speakers on a wall.

Precautions

< Be aware that the length of the cables are approximately 3 m.

Do not attempt to mount the speakers too far from the

subwoofer.

< Drill holes into solid wall support, such as wooden frame or

concrete wall.

< TEAC supplies these brackets as a convenience to the product

owner. Consult your local building codes and exercise all

necessary caution when mounting these brackets. If you are

unsure how to use the supplied brackets, consult with a local

tradesmen or building supply expert.

To hook on the wall

1. Fix the brackets on the rear panel of the speakers using

the supplied short screws.

2. Use the supplied guide sheet to mark the exact drilling

points on the wall.

3. Drill holes in the wall at the marked points.

4. Screw the supplied long screws into the wall.

Leave about 5 mm space between the screw’s head and the

wall.

< As a convenience, a set of tapered plastic anchors is supplied.

If you chose to use these anchors, drill a pilot hole using a 6

mm drill bit then tap the anchor into the pilot hole.

Only use these anchors if they are appropriate for the

materials onto which the unit is to be mounted. Consult your

local hardware store if you are uncertain.

5.Before going on, connect the speakers and the

subwoofer using the supplied speaker cables (see page

6-7).

6. Carefully hang the speakers onto the screws.

Note:

Ensure that the speaker locks onto the hooks and that the

hooks are strong enough to support the weight before

removing your hands.

11

ENGLISH

The MC-DX32i comes mounted with an adapter for iPod with

color display (40GB, 60GB), “60GB (color) + Photo 40GB/60GB”.

To play your iPod through the MC-DX32i, you have first to check

if the factory mounted adapter fits your model of iPod. If it does

not, you have to replace it with a correct one, as explained

below.

1. Remove the adapter from the Dock of the MC-DX32i.

Hold the left and right sides of the adapter and gently pull it

up.

2. Choose the Dock adapter that fits your iPod mobile

digital device.

“Video 30GB” for iPod with video (30 GB).

“Video 60GB/80GB” for iPod with video (60 GB, 80 GB).

“nano” for iPod nano.

“mini” for iPod mini.

“20GB (color) + Photo 30GB” for iPod with color display

(20GB, 30GB, U2 Special Edition).

“60GB (color) + Photo 40GB/60GB” for iPod with color

display (40GB, 60GB).

“20GB + U2” for iPod with Click Wheel (20 GB, U2 Special

Edition).

“40GB” for iPod with Click Wheel (40 GB).

< Use a commercially available adapter to play iPod with dock

connector (with four buttons under the display).

< When you need to remove the adapter, hold the left and

right sides of the adapter and gently pull it up.

< When you don’t use the Dock, use the supplied cover for the

Dock to prevent dust from settling on the Dock.

3. Insert the adapter into the Dock of the MC-DX32i.

Fit the front edge of the adapter into the Dock, and then

press the back edge of the adapter onto the Dock until a

slight “click” is heard indicating the adapter is inserted

correctly.

Compatible iPod Software

In case your iPod will not work with the MC-DX32i or with

the remote control unit, software update may solve the

problem.

Visit the Apple website and download the latest iPod

Software.

iPod is a trademark of Apple, Inc., registered in the U.S. and

other countries.

Getting started

1

2

12

Basic Operation

2

3

1

4

< To listen to an external source connected to the AUX IN jack,

select AUX.

< In iPod and AUX modes, the display always shows the clock

and the volume level.

< If you press and hold the TIME SET button for 3 seconds in

CD or TUNER mode, the clock will be displayed for a few

seconds.

Turn on the subwoofer.

1

(Rear panel of the subwoofer)

Press the STANDBY/ON switch on the main unit.

2

Play the source and adjust the volume using the

VOLUME buttons.

4

Select a source by pressing the FUNCTION button.

3

13

ENGLISH

Muting

To mute the sound temporarily, press the MUTING button.

Press the MUTING button again to restore the sound.

Tone Control

< The MUTING indicator lights and the volume level blinks on

the display to indicate that the muting is engaged.

< If you change the volume or source during the muting, the

muting will be canceled.

SLEEP 90, 60 or 30:

The power will be switched off 90, 60 or 30 minutes later.

SLEEP 00:

The sleep timer is off.

< If you want to check the remaining time, press the SLEEP

button once. The remaining time will be displayed for a few

seconds.

Sleep Timer

You can set a sleep timer so the unit turns itself off after a

specified time.

Press the SLEEP button repeatedly until desired time appears

on the display.

1. Press the BASS or TREBLE button.

To adjust the level of low frequency sound range, press the

bass button.

To adjust the level of high frequency sound range, press the

treble button.

2. Within 5 seconds, press the VOLUME buttons to change

the setting.

The level can be adjusted from –5 to +5.

14

Listening to iPod

Select “iPod” using the FUNCTION button. If an iPod is

already docked, playback will start.

In iPod mode, press the Play/Pause button (G/J) to start or

pause playback.

Insert the iPod into the Dock of the MC-DX32i.

Then press the Play/Pause button (y/J) on the iPod. The

MC-DX32i will automatically turn on and start playback

from the iPod’s music list.

< If the iPod that is in playback mode is inserted into the Dock,

the MC-DX32i will automatically turn on and start playback of

the iPod.

< Make sure to use an appropriate Dock adapter (see “Getting

started” on page 11).

< The iPod battery will be fully recharged when the iPod is

docked and the MC-DX32i is ON.

< When headphones are plugged into the iPod, sound comes

from both the speakers of the MC-DX32i and the

headphones.

< The Stop button (H) doesn’t work in iPod mode.

To select iPod mode

To suspend playback temporarily

(pause mode)

Press the Play/Pause button (G/J) during playback. Playback

stops at the current position. To resume playback, press the

Play/Pause button (G/J) again.

To skip to the next or a previous track

During playback, press the skip button (. or/ )

repeatedly until the desired track is found. The selected track

will be played from the beginning.

< When the . button is pressed during playback, the track

being played will be played from the beginning. To return to

the beginning of the previous track, press the . button

twice.

Search for a part of a track

During playback, hold down the skip button (.or/) for

more than 2 seconds and release it when the part you want

to listen to is found.

15

ENGLISH

To activate the shuffle mode

During playback, press the SHUFFLE button of the remote

control unit to change the shuffle mode.

Each time the SHUFFLE button is pressed, the SHUFFLE setting

of iPod is changed as follows:

If iPod is set to shuffle songs or albums, the Shuffle icon ( )

appears in the iPod’s display.

< The SHUFFLE button of the main unit doesn’t work in iPod

mode.

albumssongs off

Select the menu item

Press the PRESET/SCROLL buttons (‡/°) to scroll to the

menu item you want, and then press the SELECT button.

To activate the repeat mode

During playback, press the REPEAT button of the remote

control unit to change the repeat mode.

Each time the REPEAT button is pressed, the REPEAT setting

of iPod is changed as follows:

If the iPod is set to repeat one song, the Repeat One icon

()

appears in the iPod’s display.

If the iPod is set to repeat all songs, the Repeat icon ( )

appears in the iPod’s display.

< The REPEAT button of the main unit doesn’t work in iPod

mode.

AllOne off

To go back to the previous menu

Press the MENU button to go back to the previous menu.

This button is equivalent to the MENU button on your iPod.

16

Listening to CD

1

42

3

5

Press the FUNCTION button to select “CD”.

1

Press the OPEN/CLOSE button.

2

Put a disc onto the center spindle of the player with the

label side facing you.

Press the disc onto the spindle until a slight “click” is heard

indicating the disc is mounted correctly.

3

< Never put more than one disc in the mechanism at a time.

< Ensure that the disc is correctly mounted on the spindle and

locked in place.

Press the OPEN/CLOSE button to close the CD door.

4

< It takes a few seconds for the unit to load the disc.

< When no disc is loaded in the CD player, “nocd” is displayed.

Press the Play/Pause button (y/J) to start playback.

5

Playback starts from the first track of the disc.

< When the playback of all the tracks has finished, the unit

stops automatically.

total playing timetotal tracks

Elapsed time of current trackcurrent track number

17

ENGLISH

To suspend playback temporarily

(pause mode)

Press the Play/Pause button (G/J) during playback. Playback

stops at the current position. To resume playback, press the

Play/Pause button (G/J) again.

To stop playback

Press the Stop button (H) to stop playback.

To skip to the next or a previous track

During playback, press the skip button (. or/ )

repeatedly until the desired track is found. The selected track

will be played from the beginning.

In the stop mode, press the skip button (. or/ )

repeatedly until the track you want to listen to is found. Press

the Play/Pause button (G/J) to start playback from the

selected track.

< When the . button is pressed during playback, the track

being played will be played from the beginning. To return to

the beginning of the previous track, press the . button

twice.

< During programmed playback, the next or previous track in

the program is played.

Search for a part of a track

During playback, hold down the skip button (.or/) for

more than 2 seconds and release it when the part you want

to listen to is found.

Every time the REPEAT button is pressed, the mode is

changed as follows:

< If one of the following buttons is pressed, repeat mode will

be canceled:

STOP, FUNCTION, FM/AM, OPEN/CLOSE, STANDBY/ON

Repeat one track

Press the REPEAT button once during playback. “REPEAT”

lights.

The track being played will be played repeatedly. If you press

the Skip button (.or/) and select another track, the

track you selected will be played repeatedly.

It is also possible to select a track to be repeated in the stop

mode. Press the REPEAT button, select a track using the Skip

button (.or/), and then press the Play/Pause button

(G/J) to start playback.

Repeat all the tracks

All the tracks will be played repeatedly.

Press the REPEAT button twice. “REPEAT ALL” lights.

During programmed playback, programmed tracks will be

played repeatedly.

REPEAT REPEAT ALL

(off)

Repeat Playback

18

MEMORY

FUNCTION

Up to 32 tracks can be programmed in the desired order.

If another source is selected, select “CD” using the

FUNCTION button.

1

In the stop mode, press the MEMORY button.

2

The MEMORY indicator blinks on the display.

< To cancel the program mode, press the Stop button (H).

Programmed PlaybackShuffle Playback

The tracks can be played randomly. Press the SHUFFLE button

during playback or when in the stop mode.

The SHUFFLE indicator appears on the display.

< If you press the / button during shuffle playback, next

track will be randomly selected and played. If you press the

. button, the currently played track will be played from

the beginning. A track cannot be replayed during shuffle

playback.

< Shuffle playback doesn’t work during programmed playback.

< If one of the following buttons is pressed, shuffle mode will

be cancelled:

SHUFFLE, STOP, FUNCTION, FM/AM, STANDBY/ON,

OPEN/CLOSE

19

ENGLISH

To check the programmed order

In the stop mode, press the MEMORY button repeatedly. The

track number and program number will be shown on the

display.

To add a track to the end of the program

In the stop mode, press the MEMORY button repeatedly until

“

--

” appears on the display. Select a track number using the

Skip button (. or/) and then press the MEMORY

button. The track is added to the end of the program.

To overwrite the program

In the stop mode, press the MEMORY button repeatedly until

the program number to be changed appears on the display.

Select a new track number using the Skip button (.or/)

and then press the MEMORY button.

To clear program

To clear the programmed contents, press the MEMORY and

the STOP button (H) in the stop mode.

< If one of the following buttons is pressed, the programmed

contents will also be cleared:

FUNCTION, FM/AM, STANDBY/ON

< If the unit is disconnected from the power supply, the

programmed contents will be cleared.

When the selection of track numbers is completed,

press the Play/Pause button (G/J) to start programmed

playback.

4

< When the playback of all the programmed tracks has finished,

or if you press the Stop button (H), the MEMORY indicator

will go off and the program mode will be cancelled. Still the

program is retained in memory.

You can return to the programmed playback by pressing the

MEMORY button and the Play/Pause button (G/J).

< Shuffle function doesn’t work during programmed playback.

Press the Skip button (.or/) repeatedly to select a

track, then press the MEMORY button.

3

program numbertrack number

The track is programmed, and the next program number (P-

02) is displayed.

< Repeat this step to program more tracks.

< You can program up to 32 tracks.

20

Connect the PHONES jack (audio output jack) of a

portable audio player to the AUX IN jack of the MC-

DX32i using the supplied stereo mini plug cable.

1

Listening to an External Source

Play the source, and adjust the volume using the

VOLUME buttons of the MC-DX32i and of the audio

player.

3

Press the FUNCTION button to select “AUX”.

2

When using the PHONES jack of your mini player, you must

adjust the volume of the mini-player or you may hear no

sound from your MC-DX32i.

< Turning the volume of the mini player up too high may cause

the sound from your MC-DX32i to be distorted. If this is the

case, reduce the volume of the mini player until the distortion

stops and then adjust the volume level of the MC-DX32i to a

comfortable listening level

You can use this way of connection to listen to an iPod that

has no Dock connector or that has, but an appropriate Dock

adapter is not available.

AUX IN

La page charge ...

TEAC MC-DX32I Le manuel du propriétaire

TEAC MC-DX32I Le manuel du propriétaire

dans d''autres langues

Documents connexes