TEAC SR-100I Le manuel du propriétaire

Marque: TEAC

Modèle: SR-100I

Catégorie: Lecteur CD

Taper: Le manuel du propriétaire

SR-100i

Hi-Fi TABLE RADIO/CD

OWNER’S MANUAL

MODE D'EMPLOI

MANUAL DEL USUARIO

41009606-A101

ENGLISH FRANÇAIS ESPAÑOL

Downloaded From Disc-Player.com TEAC Manuals

IMPORTANT SAFETY INSTRUCTIONS

1) Read these instructions.

2) Keep these instructions.

3) Heed all warnings.

4) Follow all instructions.

5) Do not use this apparatus near water.

6) Clean only with dry cloth.

7) Do not block any ventilation openings. Install in

accordance with the manufacturer’s instructions.

8) Do not install near any heat sources such as radiators,

heat registers, stoves, or other apparatus (including

amplifiers) that produce heat.

9) Do not defeat the safety purpose of the polarized or

grounding-type plug. A polarized plug has two blades

with one wider than the other. A grounding type plug

has two blades and a third grounding prong. The wide

blade or the third prong are provided for your safety. If

the provided plug does not fit into your outlet, consult

an electrician for replacement of the obsolete outlet.

10) Protect the power cord from being walked on or

pinched particularly at plugs, convenience receptacles,

and the point where they exit from the apparatus.

11) Only use attachments/accessories specified by the

manufacturer.

12) Use only with the cart, stand,

tripod, bracket, or table specified

by the manufacturer, or sold with

the apparatus. When a cart is used,

use caution when moving the cart/

apparatus combination to avoid

injury from tip-over.

13) Unplug this apparatus during lightning storms or when

unused for long periods of time.

14) Refer all servicing to qualified service personnel.

Servicing is required when the apparatus has been

damaged in any way, such as power-supply cord or

plug is damaged, liquid has been spilled or objects

have fallen into the apparatus, the apparatus has been

exposed to rain or moisture, does not operate normally,

or has been dropped.

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,

DO NOT REMOVE COVER (OR BACK). NO USER-

SERVICEABLE PARTS INSIDE. REFER SERVICING TO

QUALIFIED SERVICE PERSONNEL.

The lightning flash with arrowhead symbol,

within an equilateral triangle, is intended to

alert the user to the presence of uninsulated

“dangerous voltage” within the product’s

enclosure that may be of sufficient magnitude

to constitute a risk of electric shock to persons.

The exclamation point within an equilateral

triangle is intended to alert the user to the

presence of important operating and

maintenance (servicing) instructions in the

literature accompanying the appliance.

MPEG Layer-3 audio coding technology licensed from

Fraunhofer IIS and Thomson.

This product is protected by certain intellectual property

rights of Microsoft. Use or distribution of such technology

outside of this product is prohibited without a license from

Microsoft.

iPhone, iPod, iPod classic, iPod nano, iPod shuffle, and iPod

touch are trademarks of Apple Inc., registered in the U.S.

and other countries.

“Made for iPod” means that an electronic accessory

has been designed to connect specifically to iPod and

has been certified by the developer to meet Apple

performance standards.

Apple is not responsible for the operation of this device or

its compliance with safety and regulatory standards.

Other company names and product names in this

document are the trademarks or registered trademarks of

their respective owners.

Downloaded From Disc-Player.com TEAC Manuals

< Do not expose this apparatus to drips or splashes.

< Do not place any objects filled with liquids, such as

vases, on the apparatus.

< Do not install this apparatus in a confined space such as

a book case or similar unit.

< The apparatus draws nominal non-operating power

from the AC outlet with its POWER or STANDBY/ON

switch not in the ON position.

< The apparatus should be located close enough to the

AC outlet so that you can easily grasp the power cord

plug at any time.

< The mains plug is used as the disconnect device, the

disconnect device shall remain readily operable.

< If the product uses batteries (including a battery pack

or installed batteries), they should not be exposed to

sunshine, fire or excessive heat.

< CAUTION for products that use replaceable lithium

batteries: there is danger of explosion if a battery is

replaced with an incorrect type of battery. Replace only

with the same or equivalent type.

< Caution should be taken when using earphones or

headphones with the product because excessive sound

pressure (volume) from earphones or headphones can

cause hearing loss.

WARNING: TO PREVENT FIRE OR SHOCK

HAZARD, DO NOT EXPOSE THIS APPLIANCE

TO RAIN OR MOISTURE.

CAUTION

< DO NOT REMOVE THE EXTERNAL CASES OR CABINETS

TO EXPOSE THE ELECTRONICS. NO USER SERVICEABLE

PARTS ARE WITHIN!

< IF YOU ARE EXPERIENCING PROBLEMS WITH THIS

PRODUCT, CONTACT TEAC FOR A SERVICE REFERRAL. DO

NOT USE THE PRODUCT UNTIL IT HAS BEEN REPAIRED.

< USE OF CONTROLS OR ADJUSTMENTS OR

PERFORMANCE OF PROCEDURES OTHER THAN THOSE

SPECIFIED HEREIN MAY RESULT IN HAZARDOUS

RADIATION EXPOSURE.

This equipment has been tested and found to comply

with the limits for a Class B digital device, pursuant

to Part 15 of the FCC Rules. These limits are designed

to provide reasonable protection against harmful

interference in a residential installation. This equipment

generates, uses, and can radiate radio frequency energy

and, if not installed and used in accordance with the

instructions, may cause harmful interference to radio

communications. However, there is no guarantee that

interference will not occur in a particular installation.

If this equipment does cause harmful interference to

radio or television reception, which can be determined

by turning the equipment off and on, the user is

encouraged to try to correct the interference by one or

more of the following measures:

r Reorient or relocate the equipment and/or the

receiving antenna.

r Increase the separation between the equipment and

receiver.

r Connect the equipment into an outlet on a circuit

different from that to which the receiver is connected.

r Consult the dealer or an experienced radio/TV

technician for help.

CAUTION

Changes or modifications to this equipment not

expressly approved by TEAC CORPORATION for

compliance will void the user’s warranty.

For U.S.A.

This product has been designed and manufactured

according to FDA regulations “title 21, CFR, chapter 1,

subchapter J, based on the Radiation Control for Health

and Safety Act of 1968“, and is classified as class 1 laser

product. There is not hazardous invisible laser radiation

during operation because invisible laser radiation emitted

inside of this product is completely confined in the

protective housings.

The label required in this regulation is as follows:

Optical pickup

Type : KHS-313A

Manufacturer : Sony Electronics Inc.

Laser output : 7 mW

Wavelength : 770 - 800 nm

For U.S.A.

Back of the unit

Downloaded From Disc-Player.com TEAC Manuals

Thank you for choosing TEAC. Read this manual

carefully to get the best performance from this unit.

Contents

Before Using the Unit ..................................5

Discs ..................................................6

USB Storage Devices. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

MP3/WMA Compatibility ..............................7

Compatible iPod ......................................8

Connections ..........................................9

Identifying the Parts (Main Unit) ......................10

Identifying the Parts (Remote Control Unit) ...........12

Remote Control Unit .................................14

Setting the Clock .....................................15

Basic Operation ......................................16

iPod

Listening to an iPod ..................................18

USB

Listening to a Disc ....................................20

Listening to a USB Storage Device ....................21

Basic Playback ........................................22

Programmed Playback ...............................24

Repeat Playback ......................................26

Shuffle Playback ......................................27

AUX

Listening to an External Source .......................27

Listening to the FM Radio. . . . . . . . . . . . . . . . . . . . . . . . . . . . .28

Preset Tuning .........................................29

Wake Up Timer .......................................30

Troubleshooting ......................................31

MP3/WMA Playback Order ............................33

Specifications ........................................33

Downloaded From Disc-Player.com TEAC Manuals

ENGLISH

What’s in the box

Confirm the supplied standard accessories.

Remote control unit (RC-1265) x 1

Battery (CR2025) for remote control unit x 1

AC power cord x 1

FM antenna x 1

USB cable x 1

Owner’s manual (this document) x 1

< Keep this manual in a safe place for future reference.

Warranty card x 1

CAUTION

< Do not tilt the unit with a disc inserted. It may damage

the disc and cause a malfunction.

< Do not move the unit during disc playback.

During playback, the disc rotates at high speed. Do not

lift or move the unit during playback. Doing so might

damage the disc or the unit.

< The voltage supplied to the unit should match the

voltage as printed on the rear panel. If you are in any

doubt regarding this matter, consult an electrician.

< Do not open the cabinet because this might result in

damage to the circuitry or electrical shock. If a foreign

object should get into the unit, contact your dealer or

service company.

Before Using the Unit

< When removing the AC power plug from the wall

socket, always pull directly on the plug, never yank on

the cord.

< Always remove the disc before relocating or moving

this unit. Moving the unit with a disc inside it could

cause malfunction.

Placement of the unit

< Choose the installation location of your unit carefully.

Avoid placing it in direct sunlight or close to a source of

heat. You should also avoid locations that are subject to

vibration, excessive dust, heat, cold or moisture.

< As the unit may become warm during operation, always

leave sufficient space around it for ventilation.

< Do not place the unit on an amplifier, a receiver or any

other device that generates heat.

< When the unit is turned on, if a TV is turned on nearby

lines might appear on the TV screen depending on the

frequency of the TV broadcast. This is not a malfunction

of the unit or the TV. If you see such lines, move the unit

and the TV further apart.

Maintenance

If the surface of the unit gets dirty, wipe with a soft cloth or

use a diluted mild liquid soap. Allow the surface of the unit

to dry completely before using.

For safety, disconnect the power cord from the outlet

before cleaning.

< Never spray liquid directly on this unit.

< Do not use thinner or alcohol as they could damage the

surface of the unit.

Beware of condensation

When the unit is moved from a cold to a warm place,

or used after a sudden temperature change, there is a

danger of condensation on the lens of CD player. Vapour

in the air could condense on internal mechanisms, making

correct operation erratic or impossible. To prevent this,

or if this occurs, leave the unit turned on for one or two

hours. Then the unit will stabilize at the temperature of its

surroundings.

Downloaded From Disc-Player.com TEAC Manuals

Discs that can be played on this unit

CDs that bear the “COMPACT disc DIGITAL AUDIO”

logo (12 cm).

Do not use 8 cm discs with this unit.

CD-R and CD-RW discs that have been correctly

recorded in the audio CD format and finalized.

Finalized CD-R and CD-RW discs that contain MP3/

WMA files.

Caution:

Playback of any other type of disc could cause

loud noise and damage to speakers as well as

harm hearing. Never play back any other type of

disc.

< Copy-protected discs and other discs that do not

conform to the CD standard might not play correctly

in this player. If you use such discs in this unit, TEAC

Corporation and its subsidiaries will not be responsible

for any consequences or guarantee the quality of

reproduction. If you experience problems with such

non-standard discs, you should contact their issuers.

About CD-R/CD-RW discs

This unit can play back CD-R and CD-RW discs that have

been recorded in the audio CD (CD-DA), MP3, and WMA

format.

< Discs created by a CD recorder must be finalized before

use with this unit.

< Depending on disc quality and recording conditions,

playback of some discs might not be possible. Please

see the manual for the device that you used to create

the disc.

< If you are uncertain about the handling of a CD-R

or CD-RW disc, please contact the seller of the disc

directly.

Caution:

< Do not use 8cm discs. Using them could cause

malfunction or damage the unit.

< Do not play any disc that is warped, deformed or

damaged. Playing such discs could cause irreparable

harm to the playing mechanisms.

< Printable CD-R and CD-RW discs are not recommended

because their label sides could be sticky and damage

the unit.

< Do not stick papers or protective sheets on the discs

and do not use any protective coating sprays.

< Use a soft oil-based felt-tipped pen to write information

on the label side. Never use a ball-point or hard-tipped

pen, as this could cause damage to the recorded side.

< Never use a stabilizer. Using commercially available CD

stabilizers with this unit will damage the mechanisms

and cause them to malfunction.

< Do not use irregularly-shaped discs (octagonal, heart-

shaped, business card size, etc.). CDs with these shapes

could damage the unit.

Handling precautions

< Always insert a disc with the label side facing you. Only

one side of a Compact Disc can be played.

< To remove a disc from its storage case, press down on

the center of the case and lift the disc out, holding it

carefully by the edges.

How to remove the disc How to hold the disc

Discs

Downloaded From Disc-Player.com TEAC Manuals

ENGLISH

MP3/WMA Compatibility

Storage precautions

< Discs should be returned to their cases after use to

avoid dust and scratches that could cause the laser

pickup to “skip.”

< Do not expose discs to direct sunlight or high-

temperature and humidity for extended periods. Long

exposure to high temperatures will warp discs.

< CD-R and CD-RW discs are more sensitive to the effects

of heat and ultraviolet rays than ordinary CDs. It is

important that they are not stored in locations where

they will be exposed to direct sunlight. They should also

be kept away from sources of heat, such as radiators and

heat-generating electrical devices.

Maintenance

< If a disc becomes dirty, wipe its surface radially from the

center hole outward towards the outer edge with a soft,

dry cloth.

< Never clean discs using chemicals such as record sprays,

antistatic sprays and fluids, benzene and thinner. Such

chemicals will do irreparable damage to the disc’s

plastic surface.

This unit can play MP3/WMA files recorded on a CD-R,

CD-RW discs and USB storage device. Refer the instruction

manual of the software when making an MP3 or a WMA

file using a PC.

< This unit can play back monaural and stereo MP3

files that are in the MPEG-1 Audio Layer 3 format with

a sampling rate of 44.1 or 48 kHz and a bit rate of

320 kbps or less.

< WMA file must have a sampling rate of 44.1 kHz, and a

bit-rate of 192 kbps or less.

< This unit is not compatible with discs that have been

recorded using multiple sessions. Only the first session

can be played back.

< This unit cannot play copyright protected files.

File information display

The display of this unit can only show single-byte letters

and numbers.

< If the file information contains Japanese, Chinese or

other double-byte characters, playback is possible but

the name will not be shown correctly.

Cautions when preparing MP3/WMA files using a

computer or other device

< Always include the extension in the file name. This unit

recognizes MP3 files by their “.mp3”, and WMA files by

their “.wma” file extensions.

< Always close the session (complete disc creation).

This unit cannot play discs if the session has not been

closed.

< Carefully read the manual for the software that you are

using when you create an MP3/WMA disc.

Files that are unplayable or only partially playable

< Files without extensions cannot be played. Files that are

not in the MP3/WMA format cannot be played even if

they have extensions.

< Variable bit rate files might not play back correctly.

< If the disc/USB storage device contains more than

99 files or 99 folders, this unit can not play it back

correctly.

< Depending on disc/USB storage device conditions, this

unit might not be able to play a disc or skipping might

occur.

USB Storage Devices

Compatibility

< Only USB flash memory can be used.

< Some flash memory players that charge from a USB

terminal cannot be used for playback.

< Hard disk drives, CD/DVD drives, and other devices

connected via USB cannot be used.

< This unit cannot copy or move files.

< Playable formats: FAT16, FAT32

< NTFS, HFS and HFS+ formats cannot be used.

< Max. number of playable folders: 99

< Max. number of playable files: 99

< Depending on the conditions of a USB storage device,

this unit might not be able to play the files on it or

skipping might occur.

Downloaded From Disc-Player.com TEAC Manuals

Compatible iPod

iPod

1st + 2nd generation

iPod

3rd generation

iPod

4th generation

iPod

4th generation

(color)

iPod

5th generation

(video)

Capacity 5/10/20GB

10/15/20/

30/40GB

20/40G/U2 20/30/40/60GB/U2 30/60/80GB

Connection to SR-100i AUX Dock Dock Dock Dock

Charging through SR-100i No No Yes Yes Yes

iPod classic

iPod touch

1st generation*

iPod touch

2nd/3rd generation*

iPhone

1st generation*

iPhone 3G/3GS*

Capacity 80/120/160GB 8/16/32GB 8/16/32/64GB 4/8/16GB 8/16/32GB

Connection to SR-100i Dock Dock Dock Dock** Dock**

Charging through SR-100i Yes Yes Yes Yes Yes

iPod shuffle

1st generation

iPod shuffle

2nd/3rd generation

iPod mini

iPod nano

1st generation

iPod nano

2nd generation

(aluminium)

Capacity 512MB/1GB 1/2/4GB 4/6GB 1/2/4GB 2/4/8GB

Connection to SR-100i AUX AUX Dock Dock Dock

Charging through SR-100i No No Yes Yes Yes

iPod nano

3rd generation

(video)

iPod nano

4th/5th generation

Capacity 4/8GB 8/16GB

Connection to SR-100i Dock Dock

Charging through SR-100i Yes Yes

* When using an iPod touch/iPhone with this unit, if you use any application other than the iPod application, the SR-100i

power might turn on again soon after it is turned off (put in standby). Since the unit cannot turn the iPod touch/iPhone

power off when such an application is running, you must quit the application before turning SR-100i off (putting it in

standby).

** Works in Airplane mode.

If your iPod does not work with SR-100i or the remote control unit, a software update might solve the problem. Visit the

Apple website and download the latest iPod software.

Downloaded From Disc-Player.com TEAC Manuals

ENGLISH

AC wall socket

USB flash memory

Connections

Portable audio

player

(Optional cable)

AUX in jacks

These jacks transmit an analog 2-channel audio signal.

Connect a portable audio player using commercially

available RCA pin-stereo mini plug cable.

Be sure to connect the cables as follows:

White plug e White jack (L: left channel)

Red plug e Red jack (R: right channel)

< When using the headphones jack of the component,

if you do not adjust its volume, you might not hear

any sound from SR-100i.

< Turning the volume of the connected component

up too high might cause the sound from SR-100i to

be distorted. In this case, reduce the volume of the

component until the distortion stops and then adjust

the volume level of SR-100i to a comfortable listening

level.

< Be sure to insert each plug securely. To prevent hum

and noise, avoid bundling the signal interconnection

cables together with the AC power cord or speaker

cables.

FM ANTENNA terminal

Connect the supplied FM antenna. Extend fully and

position for the best reception and attach it to a

window frame or wall with thumbtacks or the like.

USB (

) port

You can connect a USB storage device to this port

using the supplied USB cable.

AC in

After all other connections have been completed,

connect the plug to an AC wall socket.

Be sure to connect the power cord to an AC outlet

which supplies the correct voltage.

Hold the power plug when plugging or

unplugging the power cord.

Back

After all connections are complete, connect the power cord’s plug to the AC wall socket.

< Read the instructions of each device that you intend to use with this unit.

< Be sure to connect each plug securely. To avoid hum and noise, do not bundle the connection cords.

Downloaded From Disc-Player.com TEAC Manuals

J J

Top

Front

Identifying the Parts (Main Unit)

Downloaded From Disc-Player.com TEAC Manuals

ENGLISH

Standby/On ( )/FUNCTION

Use this button to turn the unit on and off (standby).

To turn off unit, hold down this button for more than

3 seconds.

When an iPod is not connected to the dock:

e “ECO PWR” appears on the display for a few

seconds. Then the unit is turned off (put in

standby) and the STANDBY indicator lights.

When an iPod is connected to the dock:

e The clock appears on the display and the iPod

battery is charged. If you disconnect the iPod

and no button is pressed for 90 seconds, the unit

is turned off (put in standby) and the STANDBY

indicator lights.

Use this button also to select a source.

Play/Pause (y/J)

In CD, USB or iPod mode, use this button to start or

pause playback.

Stop (H)

In CD or USB mode, use this button to stop playback.

Disc insertion slot

Insert a disc with the printed label side facing you.

Eject (L)

Use this button to eject the disc.

VOLUME ( + / – )

Use these buttons to adjust the volume level.

While setting the clock or the wake up timer, use these

buttons to change the value.

Display

Displays the clock, track number, etc.

Remote sensor

When operating the remote control unit, point it

towards here.

STANDBY indicator

This indicator lights when the unit is in standby mode.

Speakers (Stereo)

iPod dock

Push the “TEAC” mark to open the dock. Connect an

iPod to the dock connector.

Push to close the dock when not in use.

Downloaded From Disc-Player.com TEAC Manuals

STANDBY/ON ( )

Use this button to turn the unit on and off.

When the unit is turned off, and an iPod is not

connected to the dock:

e “ECO PWR” appears on the display for a few

seconds. Then the unit is turned off (put in

standby) and the STANDBY indicator lights.

When the unit is turned off, and an iPod is connected

to the dock:

e The clock appears on the display and the iPod

battery is charged. If you disconnect the iPod

and no button is pressed for 90 seconds, the unit

is turned off (put in standby) and the STANDBY

indicator lights.

FUNCTION

Use this button to select a source.

FM MODE/Repeat ( )

In FM mode, use this button to select Auto or Mono

mode.

In CD, USB or iPod mode, use this button to set the

repeat function.

INTRO

In CD or USB mode, use this button to play the

beginning of each track/file consecutively (page 23).

Play/Pause (y/J)

In CD, USB or iPod mode, use this button to start or

pause playback.

Stop (H)

In CD or USB mode, use this button to stop playback.

Note

To simplify explanations, instructions in this manual

might refer to the main unit or remote control unit only.

In such cases, the same controls on the remote control

and main unit will operate similarly.

Identifying the Parts (Remote Control Unit)

Downloaded From Disc-Player.com TEAC Manuals

ENGLISH

Scroll (˙ / ¥)

In CD or USB mode, use these buttons to select a folder

(MP3/WMA disc and USB storage device only).

In iPod mode, use these buttons to scroll up and down

in a menu. These buttons have the same functions as

the Click Wheel of an iPod.

In FM mode, use these buttons to select a preset

station.

In iPod mode, use this button to go back to the previous

menu. This button has the same functions as its iPod

counterpart.

S.BASS

Use this button to reinforce the bass sound.

CLOCK

Use this button to display the clock.

When the unit is turned off, use this button to display or

set the clock (page 15).

A-B

In CD or USB mode, use this button to set the points for

A-B repeat (page 26).

Shuffle ( )

In CD, USB or iPod mode, use this button to set the

shuffle function.

VOLUME ( +/ – )

Use these buttons to adjust the volume level.

While setting the clock or the wake up timer, use these

buttons to change the value.

DISPLAY

During playback of a disc or USB storage device, use this

button to display the track/file information.

ENTER

In iPod mode, use this button to confirm a selection in a

menu. This button has the same functions as the center

button of the Click Wheel of an iPod.

TUNING/Cursor (ß / å)/Skip (.//)

In CD, USB or iPod mode, use these buttons to skip to

the next or previous track/file. Hold these buttons to

search for a specific part of a track/file.

In FM tuner mode, use these buttons to tune in a

station.

MUTING

Use this button to mute the sound.

PROGRAM

In CD or USB mode, use this button to program tracks/

files (page 24).

In FM tuner mode, use this button to preset stations

(page 29).

LOUDNESS

Use this button to increase the bass sound at low

volume.

PRESET EQ

Use this button to select a preset equalizer (page 17).

SLEEP/TIMER

Use this button to set the sleep timer (page 17).

When the unit is turned off, use this button to set the

wake up timer (page 30).

DIMMER

Use this button to set the brightness of the display.

Downloaded From Disc-Player.com TEAC Manuals

Remote Control Unit

The supplied remote control unit allows the unit to be

operated from a distance.

When using the remote control unit, point it towards the

remote sensor within 60° horizontally and 20° vertically of

the front of the unit.

< Even if the remote control is used within its effective

operation range (16ft/5 m), the unit might not respond

to the remote if there are any obstacles between them.

< The remote control might function incorrectly if it is

operated near other products that generate infrared

rays or if other remote control devices that use infrared

rays are operated near the unit. Likewise, the other

products might also function incorrectly.

Battery installation

Remove the battery compartment cover.

Put the lithium-ion battery (CR2025, 3 V) in with the “+”

side up.

Close the cover.

Battery replacement

If the distance required between the remote control unit

and main unit decreases, the battery is exhausted. In this

case, replace the battery with a new one.

< For information about the collection of batteries, please

contact your local municipality, your waste disposal

service or the place where you purchased them.

Battery Precautions

< Be sure to insert the battery with the positive “+” and

negative “ - ” polarities correctly positioned.

< If the battery leaks, wipe away the leakage inside the

battery compartment and replace the battery with a

new one.

< If the remote control unit is not to be used for a long

time (more than a month), remove the battery from the

remote control unit to prevent it from being exhausted.

< Do not use any batteries other than those specified.

< Do not heat or disassemble batteries. Never throw them

in fire or water.

< Do not carry or store batteries with other metallic

objects. The batteries could short circuit, leak or

explode.

Downloaded From Disc-Player.com TEAC Manuals

ENGLISH

Setting the Clock

Set the clock before any operations.

If the unit is on, press the STANDBY/ON (

)

button to turn it off.

Press the CLOCK button repeatedly until

“CLK SET” appears on the display.

The hour value blinks.

< If no button is pressed for 30 seconds, the clock

setting mode will be cancelled.

Press the VOLUME ( + / – ) buttons repeatedly to

set the current hour, then press the CLOCK

button.

The minute value blinks.

Press the VOLUME ( + / – ) buttons repeatedly to

set the current minute, then press the CLOCK

button.

Setting the clock is now completed, and the clock

starts from 00 seconds.

Checking the clock

Press the CLOCK button and the clock will be shown on

the display for a few seconds.

Downloaded From Disc-Player.com TEAC Manuals

This chapter describes the basic operation which is

available in every mode.

Press the Standby/On (

) button to turn the

unit on.

< The unit turns on with the source that was last

selected.

Press the FUNCTION button (same as the

Standby/On button) repeatedly to select a

source.

The source changes as follows:

iPod

USB

AUX

< To listen to an external component connected to the

AUX jack, select “AUX”.

Play the source, and adjust the volume using

the VOLUME ( + / – ) buttons.

The volume can be adjusted from MIN (0) to MAX

(31).

Reinforcing the bass

You can reinforce the bass sound.

Press the S.BASS button.

To cancel the function, press the S.BASS button again.

< When the LOUDNESS function is set to on, the S.BASS

function is set to off automatically.

Loudness

You can increase the bass and treble sound effect at low

volume. Set this function to off when listening at normal

levels.

Press the LOUDNESS button.

To cancel the function, press the LOUDNESS button

again.

< When the S.BASS function is set to on, the LOUDNESS

function is set to off automatically.

Basic Operation

iPod

USB

AUX

Downloaded From Disc-Player.com TEAC Manuals

ENGLISH

Equalizer

You can adjust the sound according to the genre of the

music or your taste.

Each time the PRESET EQ button is pressed, the

equalizer is changed as follows:

POP

JAZZ

CLASSIC

ROCK

FLAT (Default)

< If you are also using the equalizer setting on your iPod

or other audio player, the effects will be combined and

might not sound as expected.

We recommend that you use either this unit’s equalizer

or the equalizer on your audio player in most cases.

Muting

You can mute the sound temporarily.

Press the MUTING button.

Press the MUTING button again to restore the sound.

< “MUTE” blinks on the display while muting is engaged.

< If you change the volume or source when the sound is

muted, muting is cancelled.

Sleep timer

You can set the sleep timer so that the unit turns itself off

after a specified amount of time.

Each time the SLEEP button is pressed, the time is

changed at 10 minute intervals.

The unit will automatically will be turned off when the

time elapses.

10 20 30

(Off)

N N N N

< If you want to check the remaining time, press the

SLEEP button once.

The remaining time is displayed for a few seconds.

< To cancel the sleep timer, press the SLEEP button

repeatedly until “--” is displayed.

Dimmer

You can change the brightness of the display.

Press the DIMMER button to set the brightness to one

of three levels.

Downloaded From Disc-Player.com TEAC Manuals

Note for iPod touch

If you want to hear the sound of video from an iPod

touch, connect the iPod touch to the dock first, then

operate SR-100i and the iPod touch.

Stopping playback temporarily

(Pause mode)

During playback, press the Play/Pause (G/J) button.

Playback stops at the current position.

To resume playback, press the Play/Pause (G/J) button

again.

To skip to the next or previous track

During playback, press the Skip (.//) button

repeatedly until you find the desired song.

The selected song will be played from the beginning.

< If the . button is pressed once during playback, the

current song will be played from the beginning.

Searching for a part of a track

Hold down

During playback, hold the Skip (.//) button to

search a part of a song.

Release it when you find the part you want to listen to.

Push the “TEAC” mark on the front of this unit

to open the iPod dock.

Connect an iPod to the dock.

The iPod automatically turns on and starts playback

from the iPod’s play list.

If an iPod is already connected, press the FUNCTION

button repeatedly to select “IPod”. Playback starts

automatically.

< The battery of an iPod is recharged whenever the

iPod is docked and SR-100i is connected to the AC

power supply.

Some of the iPod devices cannot be recharged

through the dock. For details of recharging

compatibility, see page 8.

< When you turn off the unit with an iPod connected

to the dock, the clock appears on the display and

the iPod battery is charged. If you disconnect the

iPod and no button is pressed for 90 seconds, the

unit is turned off (put in standby) and the STANDBY

indicator lights.

< If headphones are plugged into the iPod, sound

comes out from both the headphones and the

speakers of SR-100i.

Listening to an iPod

iPod

Downloaded From Disc-Player.com TEAC Manuals

ENGLISH

Activating the repeat mode

During playback, press the Repeat ( ) button to

select the repeat mode. “REP MODE” appears on the

display.

Each time the Repeat (

) button is pressed, the iPod

REPEAT setting changes as follows:

Repeat one Repeat all

Off

< If you select “Repeat one” to play only one song, the

icon appears on the iPod’s display.

< If you select “Repeat all” to play all songs, the

icon

appears on the iPod’s display.

Activating the shuffle mode

During playback, press the Shuffle ( ) button to select

the shuffle mode. “RANDOM” appears on the display.

Each time the Shuffle (

) button is pressed, the iPod

SHUFFLE setting changes as follows:

Songs Albums

Off

< During shuffle playback, the icon appears on the

iPod’s display.

Returning to the previous iPod menu

Press the MENU button.

This button has the same functions as its iPod

counterpart.

Selecting an iPod menu item

Press the Scroll (˙ / ¥) buttons to select the menu item

you want, then press the ENTER button.

Downloaded From Disc-Player.com TEAC Manuals

Press the FUNCTION button repeatedly to

select “CD”.

< When no disc is loaded, “NO DISC” appears on the

display.

Insert a disc with the printed label side facing

you.

Printed label side

The disc is automatically loaded into the player. Let

go of the disc when it starts loading.

Playback starts from the first track/file automatically.

M Do not push the disc forcibly.

M Do not insert more than one disc.

M Do not attach adhesive label, etc. to either side

of the disc.

M Do not use irregular-shaped discs.

Doing so may cause malfunction or damage the

unit.

< It takes a few seconds for the unit to load the disc. No

buttons will work during loading.

Example: Display during playback

Audio CD

Current track

number

Elapsed time

of the current

track

MP3/WMA disc

Current folder

number

Elapsed time

of the current

file

Current file

number

Example: Display when playback is stopped

Audio CD

Total number

of tracks

Total playing

time

MP3/WMA disc

Total number

of folders

Total number

of files

< MP3/WMA files that are not placed in folders are

automatically put in the “01 (root)” folder. Playback

starts from the first file in the “01 (root)” folder.

< When playback of all the tracks/files has finished,

playback stops automatically.

< See page 33 for information about the playback order

of MP3/WMA files.

Do not tilt the unit with a disc inserted. It may

damage the disc and cause a malfunction.

Removing the disc

Press the Eject (L) button.

< To reinsert a disc, insert after the disc is completely

ejected.

Listening to a Disc

Downloaded From Disc-Player.com TEAC Manuals

La page charge ...

TEAC SR-100I Le manuel du propriétaire

Marque: TEAC

Modèle: SR-100I

Catégorie: Lecteur CD

Taper: Le manuel du propriétaire

Télécharger le PDF

rapport

dans d''autres langues

English: TEAC SR-100I Owner's manual
español: TEAC SR-100I El manual del propietario

TEAC SR-100I Le manuel du propriétaire

TEAC SR-100I Le manuel du propriétaire

dans d''autres langues

Documents connexes

Autres documents