Electrolux VACS140SP Manuel utilisateur

Taper
Manuel utilisateur

Ce manuel convient également à

EVD14900
VACS140
EN
FR
DE
IT
Vacuum Drawer
Tiroir pour sous-vide
Vakuum-Lade
Cassetto per sottovuoto
Instructions
Mode d’emploi
Bedienungsanleitung
Istruzioni per l’uso
2
16
30
44
2 www.electrolux.com
CONTENTS
WE’RE THINKING OF YOU
Thank you for purchasing an Electrolux appliance. You’ve chosen a product that brings
with it decades of professional experience and innovation. Ingenious and stylish, it has
been designed with you in mind. So whenever you use it, you can be safe in the knowledge
that you’ll get great results every time. Welcome to Electrolux.
Visit our website to:
Receive advice, download our brochures, solve any anomaly and nd information
on technical support: www.electrolux.com
Register your product and receive a better service:
www.electrolux.com/productregistration
Purchase accessories, consumables and original spare parts for your appliance:
www.electrolux.com/shop
CUSTOMER SERVICE AND MAINTENANCE
We recommend always using original spare parts.
Always have the following information at hand when you contact customer services. You
can nd the following information on the rating plate: Model, appliance number (PNC),
serial number.
Warning/Attention - Important safety information.
Information and general recommendations.
Environmental information.
Subject to change without notice.
1. SAFETY INFORMATION ..................................................................................... 3
2. SAFETY INSTRUCTIONS ................................................................................... 4
3. PRODUCT DESCRIPTION ................................................................................. 6
4. CONTROL PANEL .............................................................................................. 6
5. BEFORE USING FOR THE FIRST TIME ............................................................ 7
6. DAILY USE .......................................................................................................... 7
7. CLEANING AND MAINTENANCE ..................................................................... 12
8. TROUBLESHOOTING ....................................................................................... 13
9. ENVIRONMENTAL CONSIDERATIONS .......................................................... 14
3ENGLISH
1. SAFETY INFORMATION
Carefully read the instructions before installing and
using the appliance. The manufacturer is not liable
for improper installation and use of the appliance that
may cause injuries and damage. Always keep the
instructions available for future reference.
1.1 Safety of children and vulnerable adults
This appliance can be used by children aged 8
years and above and persons with reduced physical,
sensory or mental capabilities or lack of experience
and knowledge only if they are given supervision or
trained on how to use the appliance in a safe way and
understand the hazards involved.
Children should not play with the appliance.
Keep packaging materials away from children.
Keep children and pets away from the appliance during
operation.
Cleaning and maintenance should not be done by
children without supervision.
Children under the age of 3 years must be ket away
unless constantly supervised.
1.2 Warnings on general safety
Only qualied personnel can install the appliance and
replace the cables.
Disconnect the appliance from the power supply before
carrying out any maintenance operation.
Do not use steam cleaners to clean the appliance.
Do not use abrasive detergents or metal scrapers to
clean the appliance.
If the power cord is damaged it must be replaced by
the manufacturer, by an authorised technician or by a
qualied person to prevent hazardous situations.
4 www.electrolux.com
2. SAFETY INSTRUCTIONS
2.1 Installation
CAUTION!
The appliance must be installed
by qualied personnel only
Remove the packaging material.
Do not install or use the appliance if
damaged.
Comply with the instructions supplied
with the appliance.
Always pay attention when moving the
appliance. Always wear safety gloves.
Do not turn the appliance upside down
or tilt it! This may cause oil to leak from
the pump and damage the equipment.
Respect the minimum distance from
other appliances.
Make sure the appliance is installed
and secured to a xed structure.
The sides of the appliance must be
adjacent to other equipment or units
having the same height.
2.2 Electrical connection
CAUTION!
Risk of re and electric shock.
All the electrical connections must be
made by a qualied electrician.
The appliance must be earthed.
Make sure that all the electrical data
shown on the data plate correspond
to those of the system. Otherwise,
contact an electrician.
Always use an electrical outlet with a
correctly installed protective contact.
Do not use multi-plug adapters or
extension cables.
Make sure not to damage the mains
plug and the mains cable. If the power
cable must be replaced, this should be
carried out by our Assistance Centre.
Shock protection devices must be
fastened in such a way that they
cannot be removed without tools.
Connect the mains plug to the mains
socket only once installation has been
completed.
Do not connect the mains plug if the
mains socket is loose.
Do not pull the mains cable to
disconnect the appliance. Pull only the
mains plug.
Use only suitable isolation devices:
circuit breakers, fuses (screw type
fuses must be removed from the fuse
holder), earth fault current releases
and relays.
The electric system must be equipped
with an isolation device that allows
you to disconnect the appliance from
the mains at every pole. The isolation
device must have a contact opening
width of a minimum 3 mm.
This appliance complies with the EEC
directives.
5ENGLISH
2.3 Use
CAUTION!
Risk of injury, burns, electric
shock or explosion.
Do not touch the sealing bar after use.
Residual heat can cause burns.
Use this appliance only in a household
environment.
Do not modify the specications of this
appliance.
Do not leave the appliance unattended
during operation.
Turn the appliance o after use.
Do not use the appliance with wet
hands or when it could come into
contact with water.
Do not apply pressure on the drawer.
Do not use the appliance as a work
surface or as a support surface.
Avoid the presence of sparks or open
ames near the appliance when you
open the drawer.
Do not place or keep ammable liquids,
materials or objects on the appliance, or
inside or close to it.
CAUTION!
You may damage the appliance.
Pay attention when you remove or
insert the accessories.
Do not force the cover open during the
work cycle.
Do not force the cover open during the
work cycle in the case of a power cut.
Do not place any weight on the cover.
Prevent any object from falling on
the cover! This can compromise the
integrity, causing cracks or damage.
2.4 Cleaning and maintenance
CAUTION!
There is a risk of injury, re or
damage.
Before carrying out any maintenance
operation, turn the appliance o and
disconnect the plug from the mains
socket.
Check that the appliance is cold.
2.5 Disposing of the appliance
CAUTION!
Risk of injury and choking.
Disconnect the plug from the power
supply.
Remove the mains cable and dispose
of it.
2.6 Technical Assistance
Contact the authorised Assistance
Centre to repair the appliance.
Only use original spare parts.
6 www.electrolux.com
3. PRODUCT DESCRIPTION
1
Cover
2
Sealing cushion
3
Control panel
4
Sealing bar
5
Front panel
6
Tank
7
Suction nozzle
8
Filler plate
9
Fitting for external vacuum
10
Pouches for freezing, cooking and
storage
25 pouches 20x30 cm
25 pouches 25x35 cm
11
Oil lter
12
Cap
4. CONTROL PANEL
1
MARINADE/INFUSION button
2
SEALING time indicator
3
SEALING time button
4
VACUUM level indicator
5
VACUUM level button
6
START/STOP button
7
ON/OFF button
1
2
3
4
5
6
7
1
3
4
5
67
2
8
9
10
11
12
7ENGLISH
5. BEFORE USING FOR THE FIRST TIME
CAUTION!
Refer to the chapters on safety.
CAUTION!
The plastic cap
12
removed
during installation must be put
aside and installed again for
future machine handling (e.g.
relocated) to prevent oil leaks.
5.1 Cleaning for the rst time
Refer to the "CLEANING AND
MAINTENANCE" chapter.
Wipe all parts with a damp cloth before
the rst use.
5.2 First use
Turn the appliance on while holding
down the button.
Proceed with the
RECONDITIONING CYCLE
before use as described below:
Hold down the button until all the
buttons ash.
Close the cover with light pressure.
Press the button. The and
buttons ash while the program runs.
At the end of the cycle (15 minutes)
the button will stop ashing and the
appliance will be ready for use.
6. DAILY USE
This product is ideal for:
Vacuum food packaging for
“SousVide” low temperature cooking.
Vacuum packaging for food
preservation.
Food marinade/infusion.
8 www.electrolux.com
Button Description Function
ON/OFF button Turning the appliance on/o.
START/STOP button To start/stop the packaging cycle.
VACUUM button Set one of the 4
vacuum levels
available.
The preset value is
MAX.
only sealing
MIN.
MED.
MAX.
Button
SEALING
Set the sealing
time according to
the thickness of the
pouch
1)
.
The appliance
is preset to 2.5
s, which is the
ideal time for the
pouches provided.
disabled
1.5 s
2.5 s
4.0 s
MARINADE/
INFUSION button
To activate the marinating/infusion
function.
1)
The thicker the pouch, the longer the set time.
Open the drawer completely.
Turn the appliance on while holding
down the button.
If necessary, modify the vacuum level
and the sealing time.
Lift the cover and place the pouch
containing the food to be packed inside
the tank, leaving at least 2 cm beyond
the sealing bar.
It is important not to soil the pouch in
the sealing area so as to guarantee
a perfect seal. For this reason it is
advisable to fold the inner side of the
pouch outwards by 4-5 cm. Once the
food is inserted, fold the pouch again
in its initial condition.
For small products, use the supplied
ller plate, as it helps position the
pouch in the correct position with
respect to the sealing bar.
Close the cover with light pressure
and press the button which begins
to ash. The packaging cycle will then
start.
The button stops ashing at the end of
this cycle.
Open the cover and remove the pouch.
Do not touch the sealing bar after
use. Residual heat can cause
burns.
Turn the appliance o while holding
down the button.
If the appliance is not used
for 60 minutes it switches o
automatically.
9ENGLISH
Liquid food
If the button is pressed during
operation, the cycle stops and the pouch
is immediately sealed. This procedure
must be used for packing liquid products,
which may boil during the vacuum cycle.
Note: Periodically, the appliance
automatically performs a
reconditioning cycle (see Chap.
6.5) during which the and
buttons ash.
Allow the cycle to run without
intervening on the appliance until
the 2 buttons will stop ashing.
Depending on the food to be packed, it is advisable to set the vacuum level as shown
in the table:
Vacuum level
Use
Package and divide into portions without creating
vacuum.
1)
Package and divide into portions of particularly delicate
food (salad, tomatoes, etc.) with the minimum vacuum
level (MIN).
- Package and divide delicate food into portions.
(cooked vegetables, fruit, tender meat, pasta) and liquid
food (soup, cream, sauce).
- Marinate in the pouch.
- Vacuum cook (SousVide) delicate food (e.g. sh) with
the medium vacuum level (MED).
- Package and divide solid food into portions
(raw vegetables, hard cheese, cold cuts).
- Vacuum cook (SousVide) solid food (e.g. meat,
potatoes, carrots, etc.) with the maximum vacuum level
(MAX).
1)
This function still produces light vacuum inside the pouch.
10 www.electrolux.com
6.1 Using the pouches
The pouches provided are ideal for
freezing, storage and cooking vacuum
packed food at low temperatures.
Pouches order code: 902979705
50 pouches for freezing, vacuum cooking
and storage
(25 pieces, dimensions: 20x30 cm + 25
pieces, dimensions: 25x35 cm)
Pouches order code: 9029793941
50 pouches for vacuum cooking and
storage
(25 pieces, dimensions: 20x30 cm + 25
pieces, dimensions: 25x35 cm)
It is recommended to use original
pouches.
www.electrolux.com/shop
6.2 Vacuum food packaging
for “SousVide” low temperature
cooking
With this method, the food sealed in the
vacuum pouch is then cooked slowly at
low temperature.
The benets provided are many:
the avour and texture of the remains
unaltered.
both avour and aromas are
preserved, as the cooking process
does not disperse them.
the reduced loss of liquid makes the
food softer and less dry.
nutrients like minerals and vitamins are
preserved.
You don't need to add oils or fats for
cooking.
6.3 Vacuum packaging for food
preservation
Vacuum packing extends food
preservation.
If you wish to vacuum pack freshly
cooked food, it must rst be chilled,
possibly using a blast chiller.
6.4 Marinades/infusion
Turn the appliance on while holding
down the button.
Place the food with the marinade in
the pan.
Lift the cover and place the pan in the
tank.
Press the button, which will start
to ash.
Close the cover with light pressure.
Press the button to start the
marinade cycle. This button will start
to ash.
This button will stop ashing once the
marinating cycle is completed.
The cover can then be opened and the
pan removed.
The marinating and infusion cycle has a
preset time of 8 minutes.
Increase the infusion and repeat the
cycle.
This infusion can be deactivated at any
time by pressing the button.
You can marinate food directly in
the pouch.
In this case, set the relevant
vacuum level.
11ENGLISH
6.5 Additional functions
“External vacuum”
It is to be used to eliminate the air inside
special air-tight containers (not supplied
with this appliance).
9
For the external vacuum, tighten the
tting
9
provided, inside the tank.
Connect the container pipe to the
tting
9
.
Set the maximum vacuum level and
disable the sealing .
With the appliance cover open press
the button to start the packaging
cycle. This button will start to ash.
The button stops ashing at the end of
this cycle.
“Reconditioning cycle”
This function is used in the following
situations:
Before using the appliance for the rst
time.
After extensive downtime.
After having sealed products with high
humidity content (e.g. soups).
When you notice a decrease in
appliance performance (e.g. more time
to vacuum or it does not vacuum at
all).
This program lasts about 15 minutes and
guarantees the complete cleaning of the
pump, removing any liquid emulsion that
might be found in the oil.
Do not seal any product while this
program is running.
Proceed as follows:
Hold down the button until all the
buttons ash.
Close the cover with light pressure.
Press the button. The and
buttons ash while the program runs.
At the end of the cycle (15 minutes)
the button will stop ashing and the
appliance will be ready for use.
12 www.electrolux.com
7. CLEANING AND MAINTENANCE
CAUTION!
Refer to the chapters on safety.
Clean the appliance after each use
with a damp and soft cloth.
1
4
6
Clean the Plexiglas cover
1
inside
and out using only neutral detergents
(water and soap).
Do not use abrasive products, alcohol-
based detergents, abrasive sponges,
solvents or metal objects.
Follow the safety instructions indicated
on the packaging when using products
to clean the steel tank
6
.
Clean the tank
6
, especially in the
case of residue liquid, it is advisable to
remove the sealing bar
4
upwards.
Clean the sealing bar
4
with a dry cloth.
Remove any residue that deposits on
the bar.
Clean the metal surfaces using normal
detergents suitable for stainless steel.
13ENGLISH
8. TROUBLESHOOTING
CAUTION!
Refer to the chapters on safety.
8.1 What to do if…
Problem Possible cause Solution
The pouch is not
sealed correctly.
The sealing time is not correct. Change the sealing time.
The cover gasket is dirty or
worn.
Clean or replace the cover
gasket (contact the Technical
Assistance Service for a
replacement).
The pouch is not placed
correctly on the sealing bar.
Position the pouch correctly.
The sealing bar is worn (the
Teon coating is burnt).
Replace the sealing bar (contact
the Technical Assistance
Service for a replacement).
The blade placed under the
Teon of the sealing bar is
broken.
Replace the blade (contact the
Technical Assistance Service for
a replacement).
Final vacuum is
poor.
The set vacuum level is not
correct.
Change the vacuum level.
The cover gasket is dirty or
worn.
Clean or replace the cover
gasket (contact the Technical
Assistance Service for a
replacement).
The cover is not closed
correctly.
Close the cover correctly.
Make sure that objects or dirt
are not found between the cover
and tank.
The cover does
not open.
No power supply. Wait until the power supply is
restored.
The cover is
cracked or
broken.
Damaged cover. Replace the cover (contact the
Technical Assistance Service for
a replacement).
The and
buttons ash.
“Reconditioning cycle”
in progress.
Wait for the end of the
“reconditioning cycle” (15
minutes).
The vacuum
cycle is stopped
within a few
seconds and
the button
ashes.
The cover gasket is dirty or
worn.
Clean or replace the gasket of
the cover and check that it is
closed properly.
14 www.electrolux.com
Alarm messages
Alarm Possible cause Solution
The button will
ash continuously.
The electrical board
is faulty.
Contact the Technical
Assistance Service.
The button will
ash continuously.
The vacuum is not produced. Clean or replace the cover
gasket.
(contact the Technical
Assistance Service to replace it).
Make sure the cover closes
correctly.
Press the button to reset the
alarm.
The and
buttons ash
continuously.
The pump oil
must be replaced.
Contact the Technical
Assistance Service.
The button
ashes
continuously.
The packaging cycle is
terminated in advance
because a wet product is
being packaged.
Press the button to reset the
alarm.
8.2 Assistance Data
If it is not possible to nd a solution to
the problem, contact the authorised
Assistance Centre.
The information required for the
Assistance Centre is found on the data
plate on the left side of the appliance. Do
not remove the data plate.
9. ENVIRONMENTAL CONSIDERATIONS
Recycle materials that carry this symbol
.
Dispose of the packaging in special
containers for recycling. Help protect
the environment and human health and
recycle waste deriving from electric and
electronic devices.
Do not dispose of appliances that carry
this symbol together with domestic
waste.
Return the product to your local recycling
facility or contact your municipal oce.
15ENGLISH
16 www.electrolux.com
TABLE DES MATIÈRES
PENSÉS POUR VOUS
Merci d'avoir acheté un appareil Electrolux. Vous avez choisi un produit ayant des
décennies d'expérience professionnelle et d'innovation. Ingénieux et élégant, il a été
projeté en pensant à vous. Donc si, à tout moment vous souhaitez l'utiliser, vous pouvez
être certains d'obtenir toujours les meilleurs résultats. Bienvenus chez Electrolux.
Visitez notre site Internet pour:
Recevoir des conseils, télécharger nos brochures, éliminer d'éventuelles
anomalies, obtenir des informations sur l'assistance : www.electrolux.com
Enregistrer vos produit et recevoir un meilleur service :
www.electrolux.com/productregistration
Acheter des accessoires, matériels de consommation et pièces de rechange
originales pour votre appareil : www.electrolux.com/shop
SERVICE CLIENTS ET ENTRETIEN
Nous vous conseillons d’utiliser des pièces de rechange d’origine.
Lorsqu'on contacte l'Assistance, s'assurer de disposer des données suivantes. Les
informations se trouvent sur la plaque d'identication : Modèle, numéro de l’appareil (PNC),
numéro de série.
Mise en garde/Attention - Informations de sécurité Importantes.
Informations et suggestions générales.
Informations sur l'environnement.
Sous réserve de modications.
1. CONSIGNES FONDAMENTALES DE SÉCURITÉ ........................................... 17
2. INSTRUCTIONS POUR LA SÉCURITÉ ............................................................ 18
3. DESCRIPTION DU PRODUIT ........................................................................... 20
4. TABLEAU DE COMMANDE .............................................................................. 20
5. PRÉPARATION À LA PREMIÈRE UTILISATION ............................................. 21
6. UTILISATION QUOTIDIENNE ........................................................................... 21
7. NETTOYAGE ET ENTRETIEN .......................................................................... 26
8. RÉSOLUTION DES PROBLÈMES.................................................................... 27
9. CONSIDÉRATIONS SUR L'ENVIRONNEMENT .............................................. 28
17FRANÇAIS
1. CONSIGNES FONDAMENTALES DE SÉCURITÉ
Lire attentivement les instructions fournies avant
d'installer et d’utiliser l'appareil. Le fabricant n'est pas
responsable si une installation et une utilisation non
correcte de l'appareil provoquent des lésions et des
dommages. Garder toujours les instructions à portée de
main comme référence future.
1.1 Sécurité des enfants et des personnes
vulnérables
Cet appareil peut être utilisé par des enfants de plus
de 8 ans et par des adultes ayant des capacités
physiques, sensorielles ou mentales limitées ou ayant
une expérience ou connaissance insusante sur
l'utilisation de l'appareil, seulement s’ils sont surveillés
ou instruits relativement à l'utilisation de l'appareil et
s'ils ont compris les risques impliqués.
Ne pas permettre aux enfants de jouer avec l'appareil.
Garder les matériaux d'emballage hors de portée des
enfants.
Tenir les enfants et les animaux domestiques éloignés
de l'appareil pendant le fonctionnement.
Le nettoyage et les interventions d'entretien ne doivent
pas être eectués par des enfants sans supervision.
Tenir les enfants de moins de 3 ans éloignés s’ils ne
sont pas constamment surveillés.
1.2 Mises en garde de sécurité générales
L'installation de l'appareil et le remplacement des
câbles doivent être eectués uniquement par du
personnel qualié.
Avant d'eectuer toute intervention d’entretien,
déconnecter l'appareil du réseau électrique.
Ne pas utiliser de nettoyeur vapeur pour nettoyer
l'appareil.
Ne pas utiliser de détergents abrasifs ni de raclette en
métal pour nettoyer l'appareil.
Si le câble d'alimentation est endommagé, il doit être
remplacé par le fabricant, un technicien autorisé ou une
personne qualiée, pour éviter des situations de danger.
18 www.electrolux.com
2. INSTRUCTIONS POUR LA SÉCURITÉ
2.1 Installation
ATTENTION !
L'installation de l'appareillage doit
être eectuée par du personnel
qualié.
Ôter tous les matériaux d'emballage.
Ne pas installer ni utiliser l'appareil s’il
est endommagé.
Se conformer aux instructions fournies
avec l'appareil.
Faire toujours attention en phase de
déplacement de l'appareil. Toujours
porter des gants de sécurité.
Ne pas retourner ni incliner l'appareil !
Cela fera sortir l’huile de la pompe, ce
qui pourrait endommager l'appareil.
Il est nécessaire de respecter
la distance minimum des autres
appareils.
S'assurer que l'appareil soit installé et
adéquatement ancré à une structure
xe.
Les côtés de l'appareil doivent rester
adjacents à des appareils ou unités
ayant la même hauteur.
2.2 Raccordement électrique
ATTENTION !
Risque d'incendie et de décharge
électrique.
Tous les raccordements électriques
doivent être réalisés par un électricien
qualié.
L'appareil doit disposer d'une mise à
la terre.
S’assurer que les données électriques
reportées sur la plaque des données
correspondent à celles de l'installation.
Dans le cas contraire, contacter un
électricien.
Utiliser toujours une prise électrique
avec contact de protection
correctement installée.
Ne pas utiliser de prises multiples ni de
rallonges.
S’assurer de ne pas endommager la
prise ni le câble. Si le câble électrique
doit être remplacé, l'intervention
devra être eectuée par notre Centre
d'Assistance.
Les dispositifs de protection contre
les décharges électriques doivent être
xés de telle à ne pas pouvoir être
désactivés sans outils.
Insérer la che d'alimentation dans la
prise seulement à la n de l'installation.
Si la che de courant est desserrée, ne
pas la relier à la prise.
Ne pas tirer sur le câble d'alimentation
pour débrancher l'appareil. Tirer
seulement la che.
Se servir uniquement de dispositifs
d'isolation adéquats : interrupteurs
automatiques, fusibles (ceux à
bouchon doivent être ôtés du porte-
fusible), déclencheurs pour courants
de panne à la terre et relais.
Le circuit électrique doit être doté d'un
dispositif d'isolation permettant de
déconnecter l'appareil de la prise de
courant à tous les pôles. Le dispositif
d'isolation doit avoir une largeur de
l'ouverture de contact non inférieur à 3
mm.
Cet appareil est conforme aux
directives CEE.
19FRANÇAIS
2.3 Utilisation
ATTENTION !
Risque de lésions, brûlures,
décharges électriques ou
explosions.
Ne pas toucher la barre de soudure
après l'utilisation. La chaleur résiduelle
peut causer des brûlures.
Utiliser l'appareil exclusivement dans
un environnement domestique.
Ne pas apporter de modications aux
spécications de cet appareil.
Ne jamais laisser l'appareil
sans surveillance pendant le
fonctionnement.
Éteindre l'appareil après chaque
utilisation.
Ne pas mettre en marche l'appareil
avec les mains humides ou s’il y a un
contact avec de l'eau.
Ne pas exercer de pression sur le
tiroir.
Ne pas utiliser l'appareil comme
surface de travail ou comme plan
d'appui.
Éviter la présence d'étincelles ou de
ammes ouvertes près de l'appareil
lorsqu’on ouvre le tiroir.
Ne pas poser ni laisser de liquides ou
matériaux inammables, ni d’objets
facilement inammables sur l'appareil, à
l’intérieur ou à proximité.
ATTENTION !
Il y a le risque d'endommager
l'appareil.
Faire attention lorsqu'on enlève ou
insère les accessoires.
Ne pas forcer l'ouverture du couvercle
pendant le cycle de travail.
Ne pas forcer l'ouverture du couvercle
pendant le cycle de travail en
l’absence d'énergie électrique.
N’appuyer aucun poids sur le
couvercle.
Éviter de faire tomber un objet sur le
couvercle ! Cela pourrait altérer son
intégrité, en causant des ssures ou
une rupture.
2.4 Nettoyage et entretien
ATTENTION !
Il y a le risque de lésions,
d’incendie ou de dommages à
l'appareil.
Avant d'eectuer toute intervention
d'entretien, éteindre l'appareil et
extraire la che de la prise.
Contrôler que l'appareillage soit froid.
2.5 Élimination
ATTENTION !
Risque de lésions ou étouement.
Détacher la che de l'alimentation
électrique.
Couper le câble de réseau et l'éliminer.
2.6 Assistance technique
Pour réparer l'appareil, contacter le
Centre d'Assistance autorisé.
Utiliser exclusivement des pièces de
rechange originales.
20 www.electrolux.com
3. DESCRIPTION DU PRODUIT
1
Couvercle
2
Coussin d'étanchéité
3
Panneau de commandes
4
Barre de soudure
5
Panneau avant
6
Cuve
7
Buse d'aspiration
8
Plaque de remplissage
9
Raccord pour sous-vide extérieur
10
Sachets pour surgélation, cuisson et
conservation
N. 25 20x30 cm
N. 25 25x35 cm
11
Filtre pour l’huile
12
Bouchon
4. TABLEAU DE COMMANDE
1
Bouton MARINAGE/INFUSION
2
Indicateur temps de SOUDURE
3
Bouton temps de SOUDURE
4
Indicateur niveau de SOUS-VIDE
5
Bouton niveau de SOUS-VIDE
6
Bouton DÉMARRAGE/ARRÊT
7
Bouton ALLUMAGE/ARRÊT
1
2
3
4
5
6
7
1
3
4
5
67
2
8
9
10
11
12
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60

Electrolux VACS140SP Manuel utilisateur

Taper
Manuel utilisateur
Ce manuel convient également à