JVC KD-G152 Le manuel du propriétaire

ENGLISH

FRANÇAIS

CD RECEIVER

RECEPTEUR CD

KD-S1501/KD-G152/KD-G151

For installation and connections, refer to the separate manual.

Pour l’installation et les raccordements, se référer au manuel séparé.

INSTRUCTIONS

MANUEL D’INSTRUCTIONS

GET0287-003A

[EX/EU]

For canceling the display demonstration, see page 7.

Pour annuler la démonstration des affichages, référez-vous à la page 7.

Cover_KD-S1501[EX_EU]f.indd 2Cover_KD-S1501[EX_EU]f.indd 2 10/27/04 3:21:20 PM10/27/04 3:21:20 PM

2

ENGLISH

Thank you for purchasing a JVC product.

Please read all instructions carefully before operation, to ensure your complete understanding and to

obtain the best possible performance from the unit.

IMPORTANT FOR LASER PRODUCTS

1. CLASS 1 LASER PRODUCT

2. CAUTION: Do not open the top cover. There are no user serviceable parts inside the unit; leave

all servicing to qualified service personnel.

3. CAUTION: Visible and invisible laser radiation when open and interlock failed or defeated.

Avoid direct exposure to beam.

4. REPRODUCTION OF LABEL: CAUTION LABEL, PLACED OUTSIDE THE UNIT.

Warning:

If you need to operate the receiver while

driving, be sure to look ahead carefully or

you may be involved in a traffic accident.

How to reset your unit

• This will reset the microcomputer. Your

preset adjustments will also be erased.

• If a disc is loaded, it will eject. Be careful

not to drop the disc.

How to forcibly eject a disc

If a disc cannot be recognized by the

receiver or cannot be ejected, ejects the disc

as follows.

• If this does not work, try to reset your

receiver.

• Be careful not to drop the disc when it

ejects.

Note: Only for [EX] model users in UK and European countries

For security reasons, a numbered ID card is provided with this receiver, and the same ID number is

imprinted on the receiver’s chassis. Keep the card in a safe place, as it will help the authorities to

identify your receiver if stolen.

EN02-05_KD-S1501[EX_EU]f.indd 2EN02-05_KD-S1501[EX_EU]f.indd 2 10/27/04 3:22:05 PM10/27/04 3:22:05 PM

3

ENGLISH

How to reset your unit ........................... 2

How to forcibly eject a disc ................... 2

How to read this manual ........................ 4

How to use the MODE button ............... 4

Control panel — KD-S1501/

KD-G152/KD-G151 ................... 5

Parts identification ................................. 5

Getting started ....................... 6

Basic operations .................................. 6

Canceling the display demonstrations ... 7

Setting the clock .................................... 7

Radio operations ................... 8

Listening to the radio ........................... 8

Storing stations in memory .................... 9

Listening to a preset station ................... 9

FM RDS operations ................. 10

Searching for your favorite FM RDS

programme

....................................... 10

Storing your favorite programmes ......... 11

Using the standby receptions ................. 11

Tracking the same programme

—Network-Tracking Reception ........ 12

Disc operations ...................... 13

Playing a disc ..................................... 13

Selecting the playback modes ................ 14

Sound adjustments ................ 15

Selecting preset sound modes

(C-EQ: custom equalizer) .................. 15

Adjusting the sound ............................... 16

General settings — PSM ......... 17

Basic procedure ..................................... 17

Detaching the control

panel .................................. 19

Maintenance .......................... 20

More about this receiver ........ 21

Troubleshooting ..................... 22

Specifications ......................... 23

*For safety....

• Do not raise the volume level too much, as

this will block outside sounds, making driving

dangerous.

• Stop the car before performing any

complicated operations.

Contents

*Temperature inside the car....

If you have parked the car for a long time in

hot or cold weather, wait until the temperature

in the car becomes normal before operating the

unit.

EN02-05_KD-S1501[EX_EU]f.indd 3EN02-05_KD-S1501[EX_EU]f.indd 3 10/27/04 3:22:06 PM10/27/04 3:22:06 PM

4

ENGLISH

How to read this manual

The following methods are used to made the

explanations simple and easy-to-understand:

• Some related tips and notes are explained in

“More about this receiver” (see page 21).

• Button operations are mainly explained with

the illustrations as follows:

Press briefly.

Press repeatedly.

Press either one.

Press and hold until

your desired response

begins.

Press and hold both

buttons at the same

time.

How to use the MODE button

If you press MODE, the receiver goes into

functions mode, then the number buttons work

as different function buttons.

Ex.: When number button 2 works as

MO (monaural) button.

Time countdown indicator

To use these buttons for original functions

again after pressing MODE, wait for

5 seconds without pressing any of these buttons

until the functions mode is cleared.

• Pressing MODE again also clears the

functions mode.

EN02-05_KD-S1501[EX_EU]f.indd 4EN02-05_KD-S1501[EX_EU]f.indd 4 10/27/04 3:22:06 PM10/27/04 3:22:06 PM

5

ENGLISH

Control panel — KD-S1501/KD-G152/KD-G151

Display window

1 +/– buttons

2 DISP (display) button

3 Loading slot

4 Display window

5 MODE button

6 0 (eject) button

7

¢/4 buttons

8

(standby/on/attenuator) button

9 SEL (select) button

p EQ (equalizer) button

q MO (monaural) button

w SSM (Strong-station Sequential Memory)

button

e CD button

r FM/AM button

t RPT (repeat) button

y RND (random) button

u T/P (traffic programme/programme type)

button

i

(control panel release) button

o Number buttons

Display window

; Tuner reception indicators

MO (monaural), ST (stereo)

a RDS indicators

TP, PTY, AF, REG

s CD indicator

d RND

(disc random) indicator

f RPT (repeat) indicator

g LOUD (loudness) indicator

h EQ (equalizer) indicator

j Sound mode (C-EQ: custom equalizer)

indicators

ROCK, CLASSIC, POPS, HIP HOP, JAZZ,

USER

•

also works as the time countdown

indicator.

k Main display

l Source display

Volume level indicator

Parts identification

EN02-05_KD-S1501[EX_EU]f.indd 5EN02-05_KD-S1501[EX_EU]f.indd 5 10/27/04 3:22:07 PM10/27/04 3:22:07 PM

6

ENGLISH

Getting started

Basic operations

~

Ÿ

You cannot select “CD” as the playback

source if there is no disc in the loading

slot.

!

Volume level appears.

Volume level indicator

⁄ Adjust the sound as you want.

(See pages 15 and 16.)

To drop the volume in a moment (ATT)

To restore the sound, press it

again.

To turn off the power

Caution on volume setting:

Discs produce very little noise compared

with other sources. Lower the volume

before playing a disc to avoid damaging

the speakers by the sudden increase of the

output level.

EN06-11_KD-S1501[EX_EU]f.indd 6EN06-11_KD-S1501[EX_EU]f.indd 6 10/27/04 3:22:49 PM10/27/04 3:22:49 PM

7

ENGLISH

Canceling the display

demonstrations

If no operations are done for about 20 seconds,

display demonstration starts.

[Initial: DEMO ON]—see page 17.

1

2

3

4

Finish the procedure.

To activate the display demonstration

In step 3 above...

Setting the clock

1

2

Set the hour, minute, and clock

system.

1 Select “CLOCK H” (hour), then

adjust the hour.

2 Select “CLOCK M” (minute),

then adjust the minute.

3 Select “24H/12H,” then select

“24H” (hour) or “12H” (hour).

3 Finish the procedure.

To check the current clock time when the

power is turned off

EN06-11_KD-S1501[EX_EU]f.indd 7EN06-11_KD-S1501[EX_EU]f.indd 7 10/27/04 3:22:50 PM10/27/04 3:22:50 PM

8

ENGLISH

Radio operations

Listening to the radio

~

Lights up when receiving an FM stereo

broadcast with sufficient signal strength.

Selected band appears.

Ÿ Start searching for a station.

When a station is received, searching

stops.

To stop searching, press the same

button again.

To tune in to a station manually

In step Ÿ above...

1

2 Select the desired station frequencies.

When an FM stereo broadcast is hard to

receive

1

2

Lights up when monaural mode is activated.

Reception improves, but stereo effect will

be lost.

To restore the stereo effect, repeat the same

procedure. “MONO OFF” appears and the MO

indicator goes off.

EN06-11_KD-S1501[EX_EU]f.indd 8EN06-11_KD-S1501[EX_EU]f.indd 8 10/27/04 3:22:51 PM10/27/04 3:22:51 PM

9

ENGLISH

2

3

Preset number flashes for a while.

Listening to a preset station

1

2

Select the preset station (1 – 6) you

want.

To check the current clock time while

listening to an FM (non-RDS) or AM station

• For FM RDS stations, see page 12.

Storing stations in memory

You can preset six stations for each band.

FM station automatic presetting —

SSM (Strong-station Sequential

Memory)

1

Select the FM band (FM1 – FM3)

you want to store into.

2

3

“SSM” flashes, then disappears when

automatic presetting is over.

Local FM stations with the strongest signals are

searched and stored automatically in the FM

band.

Manual presetting

Ex.: Storing FM station of 92.5 MHz into the

preset number 4 of the FM1 band.

1

EN06-11_KD-S1501[EX_EU]f.indd 9EN06-11_KD-S1501[EX_EU]f.indd 9 10/27/04 3:22:51 PM10/27/04 3:22:51 PM

10

ENGLISH

FM RDS operations

Searching for your favorite FM RDS programme

You can tune in to a station broadcasting your

favorite programme by searching for a PTY code.

~

The last selected PTY code appears.

Ÿ Select one of your favorite

programme type.

or

Select one of the twenty-nine PTY

codes.

Ex.: When “ROCK M” is selected

! Start searching for your favorite

programme.

If there is a station broadcasting a

programme of the same PTY code as

you have selected, that station is tuned

in.

PTY codes

NEWS, AFFAIRS, INFO, SPORT,

EDUCATE, DRAMA, CULTURE,

SCIENCE, VARIED, POP M (music),

ROCK M (music), EASY M (music),

LIGHT M (music), CLASSICS, OTHER

M (music), WEATHER, FINANCE,

CHILDREN, SOCIAL, RELIGION,

PHONE IN, TRAVEL, LEISURE, JAZZ,

COUNTRY, NATION M (music), OLDIES,

FOLK M (music), DOCUMENT

EN06-11_KD-S1501[EX_EU]f.indd 10EN06-11_KD-S1501[EX_EU]f.indd 10 10/29/04 11:49:32 AM10/29/04 11:49:32 AM

11

ENGLISH

What you can do with RDS

RDS (Radio Data System) allows FM

stations to send an additional signal along

with their regular programme signals.

By receiving the RDS data, this receiver can

do the following:

•

Programme Type (PTY) Search (see page 10)

• Standby Reception of Traffic

Announcement —TA (see the following) or

your favorite programme (PTY) (see pages

12 and 18)

•

Tracing the same programme automatically

—Network-Tracking Reception (see page 12)

• Programme Search (see page 18)

Storing your favorite programmes

You can store six favorite programme types.

Preset programme types in the number buttons

(1 – 6):

1 Perform steps ~ and Ÿ on page 10 to

select a PTY code.

2 Select the preset number (1 – 6) you

want to store into.

Ex.: When “ROCK M” is selected

3 Repeat steps 1 and 2 to store

other PTY codes into other preset

numbers.

4 Finish the procedure.

Using the standby receptions

TA Standby Reception

TA Standby Reception allows the receiver to

switch temporarily to Traffic Announcement

(TA) from any source other than AM.

The volume changes to the preset TA volume

level (see page 18).

To activate TA Standby Reception

The TP indicator either

lights up or flashes.

• If the TP indicator lights up, TA Standby

Reception is activated.

• If the TP indicator flashes, TA Standby

Reception is not yet activated. (This occurs

when you are listening to an FM station

without the RDS signals required for TA

Standby Reception.)

To activate TA Standby Reception, tune in to

another station providing these signals. The

TP indicator will stop flashing and remain lit.

To deactivate the TA Standby Reception

The TP indicator goes off.

EN06-11_KD-S1501[EX_EU]f.indd 11EN06-11_KD-S1501[EX_EU]f.indd 11 10/27/04 3:22:52 PM10/27/04 3:22:52 PM

12

ENGLISH

Tracking the same programme—

Network-Tracking Reception

When driving in an area where FM reception

is not sufficient enough, this receiver

automatically tunes in to another FM RDS

station of the same network, possibly

broadcasting the same programme with stronger

signals (see the illustration below).

When shipped from the factory, Network-

Tracking Reception is activated.

To change the Network-Tracking Reception

setting, see page 18.

Programme A broadcasting on different

frequency areas (01 – 05)

To check the current clock time while

listening to an FM RDS station

PTY Standby Reception

PTY Standby Reception allows the receiver

to switch temporarily to your favorite PTY

programme from any source other than AM.

To activate and select your favorite PTY

code for PTY Standby Reception, see page

18.

The PTY indicator either lights up or flashes.

• If the PTY indicator lights up, PTY Standby

Reception is activated.

• If the PTY indicator flashes, PTY Standby

Reception is not yet activated.

To activate PTY Standby Reception, tune in

to another station providing these signals. The

PTY indicator will stop flashing and remain

lit.

To deactivate the PTY Standby Reception,

select “OFF” for the PTY code (see page 18).

The PTY indicator goes off.

EN12-17_KD-S1501[EX_EU]f.indd 12EN12-17_KD-S1501[EX_EU]f.indd 12 10/29/04 11:50:02 AM10/29/04 11:50:02 AM

13

ENGLISH

Disc operations

Playing a disc

All tracks will be played repeatedly until you

change the source or eject the disc.

To stop play and eject the disc

To fast-forward or reverse the track

Fast-forwards.

Reverses.

To go to the next or previous tracks

To the following

tracks.

To the beginning of the current track, then

the previous tracks.

To go to a particular track directly

To select a number from 01 – 06:

To select a number from 07 – 12:

Total playing time of

the inserted disc

Total track number

of the inserted disc

Elapsed playing

time

Current track

number

EN12-17_KD-S1501[EX_EU]f.indd 13EN12-17_KD-S1501[EX_EU]f.indd 13 10/27/04 3:23:20 PM10/27/04 3:23:20 PM

14

ENGLISH

Prohibiting disc ejection

You can lock a disc in the loading slot.

To cancel the prohibition, repeat the same

procedure.

To check the current clock time while

listening to a disc

Selecting the playback modes

You can use only one of the following playback modes at a time.

1

2 Select your desired playback mode.

Repeat play

Ex.: When “TRK RPT” is selected

Mode Plays repeatedly

TRK RPT: The current track.

• RPT lights up.

RPT OFF: Cancels.

Random play

Mode Plays at random

Ex.: When “DISC RND” is selected

DISC RND: All tracks of the current disc.

• RND

lights up.

RND OFF: Cancels.

EN12-17_KD-S1501[EX_EU]f.indd 14EN12-17_KD-S1501[EX_EU]f.indd 14 10/27/04 3:23:20 PM10/27/04 3:23:20 PM

15

ENGLISH

Sound adjustments

Selecting preset sound modes (C-EQ: custom equalizer)

You can select a preset sound mode suitable to

the music genre.

~

Ÿ

Ex.: When “ROCK” is selected

Indication pattern for each sound mode:

Indication For:

Preset values

BAS

*

1

TRE

*

2

LOUD

*

3

USER (Flat sound) 00 00 OFF

ROCK Rock or

disco music

+03 +01 ON

CLASSIC Classical

music

+01 –02 OFF

POPS Light music +04 +01 OFF

HIP HOP Funk or rap

music

+02 00 ON

JAZZ Jazz music +02 +03 OFF

*

1

BAS: Bass

*

2

TRE: Treble

*

3

LOUD: Loudness

EN12-17_KD-S1501[EX_EU]f.indd 15EN12-17_KD-S1501[EX_EU]f.indd 15 10/27/04 3:23:21 PM10/27/04 3:23:21 PM

16

ENGLISH

Adjusting the sound

You can adjust the sound characteristics to your

preference.

1

Ex.: When “TRE” is selected

2

Indication pattern changes as

you adjust the level.

Indication To do: Range

BAS*

1

(bass)

Adjust the bass. –06 (min.)

to

+06 (max.)

TRE*

1

(treble)

Adjust the treble. –06 (min.)

to

+06 (max.)

FAD*

2

(fader)

Adjust the front

and rear speaker

balance.

R06 (Rear

only)

to

F06 (Front

only)

BAL

(balance)

Adjust the left

and right speaker

balance.

L06 (Left

only)

to

R06 (Right

only)

LOUD*

1

(loudness)

Boost low and

high frequencies

to produce a well-

balanced sound at

low volume level.

LOUD ON

J

LOUD OFF

VOL*

3

(volume)

Adjust the volume. 00 (min.) to

30 or 50

(max.)*

4

*

1

When you adjust the bass, treble, or

loudness, the adjustment you have made is

stored for the currently selected sound mode

(C-EQ) including “USER.”

*

2

If you are using a two-speaker system, set

the fader level to “00.”

*

3

Normally the +/– buttons work as the volume

control. So you do not have to select “VOL”

to adjust the volume level.

*

4

Depending on the amplifier gain control

setting. (See page 18 for details.)

EN12-17_KD-S1501[EX_EU]f.indd 16EN12-17_KD-S1501[EX_EU]f.indd 16 10/27/04 3:23:21 PM10/27/04 3:23:21 PM

17

ENGLISH

Indications Selectable settings, [reference page]

DEMO

Display demonstration

DEMO ON: [Initial]; Display demonstration will be activated

automatically if no operation is done for about

20 seconds, [7].

DEMO OFF: Cancels.

CLOCK H

Hour adjustment

0 – 23 (1 – 12), [7]

[Initial: 0 (0:00)]

CLOCK M

Minute adjustment

00 – 59, [7]

[Initial: 00 (0:00)]

24H/12H

24 hours or 12 hours time

display

12H O 24H, [7]

[Initial: 24H]

CLK ADJ

Automatic clock setting

AUTO: [Initial]; The built-in clock is automatically adjusted

using the CT (clock time) data in the RDS signal.

OFF: Cancels.

General settings — PSM

Basic procedure

You can change PSM (Preferred Setting Mode)

items listed on the table that follows.

1

2

Select a PSM item.

Ex.: When you select “AMP GAIN”

3 Adjust the PSM item selected.

4 Repeat steps 2 and 3 to adjust the

other PSM items if necessary.

5 Finish the procedure.

To be continued....

EN12-17_KD-S1501[EX_EU]f.indd 17EN12-17_KD-S1501[EX_EU]f.indd 17 10/27/04 3:23:22 PM10/27/04 3:23:22 PM

18

ENGLISH

Indications Selectable settings, [reference page]

AF-REG

Alternative frequency/

regionalization reception

When the received signals from the current station become weak....

AF: [Initial]; Switches to another station (the programme

may differ from the one currently received), [12].

• The AF indicator lights up.

AF REG: Switches to another station broadcasting the same

programme.

• The AF and REG indicators light up.

OFF: Cancels.

PTY-STBY

PTY standby

Activates PTY Standby Reception with one of the 29 PTY codes,

[12].

OFF [Initial]

=

PTY codes, [10]

=

(back to the beginning)

TA VOL

Traffic announcement

volume

[Initial: VOL 20]; VOL 00 – VOL 30 or 50*

1

, [11]

P-SEARCH

Programme search

ON: Using the AF data, the receiver tunes in to another

frequency broadcasting the same programme as the

original preset RDS station is if the preset station

signals are not sufficient.

OFF: [Initial]; Cancels.

ILL SW*

2

Illumination switch

You can select the button illumination according to your

preference.

RED O GREEN

[Initial: RED]

TEL*

2

Telephone muting

MUTING 1/MUTING 2: Select either one which mutes the

sounds while using the cellular phone.

OFF: [Initial]; Cancels.

AMP GAIN

Amplifier gain control

You can change the maximum volume level of this receiver.

LOW PWR: VOL 00 – VOL 30 (Select this if the maximum

power of the speaker is less than 45 W to prevent

them from damaging the speaker.)

HIGH PWR: [Initial]; VOL 00 – VOL 50

*

1

Depends on the amplifier gain control.

*

2

Only for KD-S1501.

EN18-23_KD-S1501[EX_EU]f.indd 18EN18-23_KD-S1501[EX_EU]f.indd 18 10/29/04 3:49:57 PM10/29/04 3:49:57 PM

19

ENGLISH

When detaching or attaching the control panel,

be careful not to damage the connectors on

the back of the control panel and on the panel

holder.

Detaching the control panel

Before detaching the control panel, be sure to

turn off the power.

Attaching the control panel

Detaching the control panel

EN18-23_KD-S1501[EX_EU]f.indd 19EN18-23_KD-S1501[EX_EU]f.indd 19 10/27/04 3:23:52 PM10/27/04 3:23:52 PM

20

ENGLISH

Maintenance

How to clean the connectors

Frequent detachment will deteriorate the

connectors.

To minimize this possibility, periodically wipe

the connectors with a cotton swab or cloth

moistened with alcohol, being careful not to

damage the connectors.

Connector

Moisture condensation

Moisture may condense on the lens inside the

CD player in the following cases:

• After starting the heater in the car.

• If it becomes very humid inside the car.

Should this occur, the CD player may

malfunction. In this case, eject the disc and

leave the receiver turned on for a few hours

until the moisture evaporates.

How to handle discs

When removing a disc from

its case, press down the center

holder of the case and lift the

disc out, holding it by the

edges.

• Always hold the disc by the edges. Do not

touch its recording surface.

When storing a disc into its case, gently insert

the disc around the center holder (with the

printed surface facing up).

• Make sure to store discs into the cases after

use.

To keep discs clean

A dirty disc may not play correctly.

If a disc does become dirty, wipe

it with a soft cloth in a straight line

from center to edge.

• Do not use any solvent (for

example, conventional record cleaner, spray,

thinner, benzine, etc.) to clean discs.

To play new discs

New discs may have some rough

spots around the inner and outer

edges. If such a disc is used, this

receiver may reject the disc.

To remove these rough spots, rub the edges

with a pencil or ball-point pen, etc.

Center holder

Warped

disc

Sticker

residue

Disc

Stick-on

label

Do not use the following discs:

EN18-23_KD-S1501[EX_EU]f.indd 20EN18-23_KD-S1501[EX_EU]f.indd 20 10/27/04 3:23:52 PM10/27/04 3:23:52 PM

La page est en cours de chargement...

JVC KD-G152 Le manuel du propriétaire

JVC KD-G152 Le manuel du propriétaire

dans d''autres langues

Documents connexes