Wireless Charger
WPC15-1TJNA
User Manual
CONETNES
1.0 INTRODUCTION ---------------------------------------------------- 1
2.0 FEATURES ---------------------------------------------------------- 1
3.0 SPECIFICATIONS -------------------------------------------------- 1
4.0 PACKAGE CONTENTS ---------------------------------------------- 2
5.0 OPERATION --------------------------------------------------------- 2
6.0 CONNECTION DIAGRAM ------------------------------------------- 3
Wireless Charger
1
Wireless Charger
DEAR CUSTOMER
Thank you for purchasing this product. For optimum performance and
safety, please read these instructions carefully before connecting,
operating or using this product. Please keep this manual for future
reference.
1.0 INTRODUCTION
This product is a high-performance wireless charger. This product is
suitable for mobile phones, MP3, MP4, digital productions, and other
productions based on wireless charging 5W or 10W or 15W. Connect
the wireless to a power charger, and then you can charge your device
supported wireless charging (MP3, mobile phones, etc) by put it on
the charger directly. It is helpful in long time journey and convenient
for business!
2.0 FEATURES
Transmitting terminal input: 5V/2A, 9V/2A ,12V/2A(compatible
with PD/QC)
Transmitting terminal output: 5W/7.5W/10W/15W
Intelligent green indicator to show working condition
Compliant with QI, CE, FCC standards
It is light, smart and convenient to use
3.0 SPECIFICATIONS
Input
Type-C 5V/2A, 9V/2A, 12V/2A
(compatible with PD/QC)
Output
5W/7.5W/10W/15W
Switch Frequency
112K-205K
Operating Temperature Range
0~30°C
Storage Temperature Range
-20 ~ 70°C
Operation Humidity
10% ~ 80% RH
Storage Humidity
5% ~ 95% RH
Size
W92.5mm*H105mm*T96.5mm
Weight
95g±3g
Wireless Charger
2
4.0 PACKAGE CONTENTS
Before attempting to use this unit, please check the packaging and
make sure the following items are contained in the shipping carton:
Main unit×1
User Manual×1
5.0 OPERATION
Operation Procedures
1. Connect the wireless charger to the power adapter, the red light
will be on during standby.
2. Place your device (which supports wireless charging) on the
charger and the green light will keep breathing.
3. When finished charging, the light will Keep breathing.
4. Please take out the device after it is fully charged.
Note: red light for flashing when malfunction occurs.
Operation Notes
1. For optimum performance, please use the wireless charger
according to this user manual.
2. Please connect the wireless charger to a power adapter which
output should be 5V/2A, 9V/2A,12V/2A.
3. Please unplug the wireless charger after using.
4. Do not use the wireless charger with an electronic product which is
not in conformity with the specifications, so as to avoid any
problem caused by specification mismatching.
5. It’s normal that wireless charger will be a little overheated in the
use process.
6. When the wireless charger stops working under some accidents ,
you need to check whether the device is compatible with this
charger.
7. Do not let the wireless charger close to fire, such as stove, candles
and etc.
8. Do not let the wireless charger soak into liquid, such as swimming
pool, bathtub, etc.
9. Do not wash the wireless charger with corrosive cleaner.
10. If the wireless charger cannot work properly, please contact the
store or distributor in your area.
11. Do not place metal objects on the back of the phone while it is
charging wirelessly.Please check that there is no metal foreign
body on the back of your mobile phone when using this product.
Wireless Charger
3
6.0 CONNECTION DIAGRAM
FCC Warning
This device complies with part 18 and part 15 of the FCC Rules. Operation is
subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause
undesired operation.
NOTE 1: This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates
uses and can radiate radio frequency energy and, if not installed and used
in accordance with the instructions, may cause harmful interference to
radio communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to
try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
Wireless Charger
4
- Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
NOTE 2: Any changes or modifications to this unit not expressly approved
by the party responsible for compliance could void the user's authority to
operate the equipment.
This equipment complies with FCC RF radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated
with a minimum distance of 20 centimeters between the radiator and your
body.
IC WARNING
This device contains licence-exempt transmitter(s) that comply with Innovation,
Science and Economic Development Canada’s licence-exempt RSS(s).
Operation is subject to the following two conditions:
(1) This device may not cause interference.
(2) This device must accept any interference, including interference that may
cause undesired operation of the device.
L’émetteur/récepteur exempt de licence contenu dans le présent appareil est
conforme aux CNR d’Innovation, Sciences et Développement économique
Canada applicables aux appareils radio exempts de licence. L’exploitation est
autorisée aux deux conditions suivantes:
1. L’appareil ne doit pas produire de brouillage;
2. L’appareil doit accepter tout brouillage radioélectrique subi, même si le
brouillage est susceptible d’en compromettre le fonctionnement.
P/N
-
1
-
2
-
3
-
4
-
5
-
6
CE-Link CE-LINK WPC15-1TJNA Wireless Charger Manuel utilisateur
- Taper
- Manuel utilisateur
- Ce manuel convient également à
dans d''autres langues
Documents connexes
Autres documents
-
Chargers WPC15-1TCNA Manuel utilisateur
-
Western Digital Technologies SDHZB0N Mode d'emploi
-
Baseus 3 in 1 Magnetic Wireless Charger Manuel utilisateur
-
Anker B2538 Manuel utilisateur
-
Anker A2538 Manuel utilisateur
-
ACEFAST E14 Mode d'emploi
-
ubiolabs WCB262 2-in-1 Wireless Charging Stand Le manuel du propriétaire
-
GEM GROUP 100813 Manuel utilisateur
