Omcan FS-US-0246 Manuel utilisateur

Revised - 07/13/2021

Toll Free: 1-800-465-0234

Fax: 905-607-0234

Email: [email protected]

www.omcan.com

Fish Scaler

Model FS-US-0246

Item 45357

Instruction Manual

2

Page

--------------------------------------------------------------------------- 3 - 4

--------------------------------------------------------------------------- 4 - 6

-------------------------------------------------------------------------- 6

-------------------------------------------------------------------------------------------- 6

--------------------------------------------------------------------------------------------- 6

----------------------------------------------------------------------------------------- 7

----------------------------------------------------------------------------- 7 - 10

---------------------------------------------------------------------------- 11

------------------------------------------------------------------------------------------- 12 - 14

---------------------------------------------------------------------------- 15

Table of Contents

Section

General Information

Safety and Warranty

Technical Specications

Installation

Operation

Maintenance

Parts Breakdown

Electrical Schematics

Notes

Warranty Registration

Model FS-US-0246

3

General Information

Omcan Manufacturing and Distributing Company Inc., Food Machinery of America, Inc. dba Omcan

and Omcan Inc. are not responsible for any harm or injury caused due to any person’s improper or

negligent use of this equipment. The product shall only be operated by someone over the age of 18, of

sound mind, and not under the inuence of any drugs or alcohol, who has been trained in the correct

operation of this machine, and is wearing authorized, proper safety clothing. Any modication to the

machine voids any warranty, and may cause harm to individuals using the machine or in the vicinity of

the machine while in operation.

CHECK PACKAGE UPON ARRIVAL

Upon receipt of an Omcan shipment please inspect for external damage. If no damage is evident on the

external packaging, open carton to ensure all ordered items are within the box, and there is no concealed

damage to the machine. If the package has suffered rough handling, bumps or damage (visible or concealed),

please note it on the bill of lading before accepting the delivery and contact Omcan within 24 hours, so we may

initiate a claim with the carrier. A detailed report on the extent of the damage caused to the machine must be

lled out within three days, from the delivery date shown in the shipping documents. Omcan has no recourse

for damaged products that were shipped collect or third party.

Before operating any equipment, always read and familiarize yourself with all operation and safety

instructions.

Omcan would like to thank you for purchasing this machine. It’s of the utmost importance to save

these instructions for future reference. Also save the original box and packaging for shipping the

equipment if servicing or returning of the machine is required.

---------------------------------------------------------------------------------------------------------------------------------------------------

Omcan Fabrication et distribution Companie Limité et Food Machinery d’Amerique, dba Omcan et

Omcan Inc. ne sont pas responsables de tout dommage ou blessure causé du fait que toute personne

ait utilisé cet équipement de façon irrégulière. Le produit ne doit être exploité que par quelqu’un de

plus de 18 ans, saine d’esprit, et pas sous l’inuence d’une drogue ou d’acohol, qui a été formé pour

utiliser cette machine correctement, et est vêtu de vêtements de sécurité approprié. Toute modication

de la machine annule toute garantie, et peut causer un préjudice à des personnes utilisant la machine

ou des personnes à proximité de la machine pendant son fonctionnement.

VÉRIFIEZ LE COLIS DÈS RÉCEPTION

Dès réception d’une expédition d’Omcan veuillez inspecter pour dommages externes. Si aucun dommage

n’est visible sur l’emballage externe, ouvrez le carton an de s’assurer que tous les éléments commandés

sont dans la boîte, et il n’y a aucun dommage dissimulé à la machine. Si le colis n’a subi aucune mauvaises

manipulations, de bosses ou de dommages (visible ou cachée), notez-le sur le bond de livraison avant

d’accepter la livraison et contactez Omcan dans les 24 heures qui suivent, pour que nous puissions engager

une réclamation auprès du transporteur. Un rapport détaillé sur l’étendue des dommages causés à la machine

doit être rempli dans un délai de trois jours, à compter de la date de livraison indiquée dans les documents

d’expédition. Omcan n’a aucun droit de recours pour les produits endommagés qui ont été expédiées ou cueilli

par un tiers transporteur.

4

Avant d’utiliser n’importe quel équipement, toujours lire et vous familiariser avec toutes les opérations

et les consignes de sécurité.

Omcan voudrais vous remercier d’avoir choisi cette machine. Il est primordial de conserver ces

instructions pour une référence ultérieure. Également conservez la boîte originale et l’emballage pour

l’expédition de l’équipement si l’entretien ou le retour de la machine est nécessaire.

---------------------------------------------------------------------------------------------------------------------------------------------------

Omcan Empresa De Fabricacion Y Distribucion Inc. Y Maquinaria De Alimentos De America, Inc. dba

Omcan y Omcan Inc. no son responsables de ningun daño o perjuicío causado por cualquier persona

inadecuada o el uso descuidado de este equipo. El producto solo podra ser operado por una persona

mayor de 18 años, en su sano juicio y no bajo alguna inuencia de droga o alcohol, y que este ha sido

entrenado en el correcto funcionamiento de esta máquina, y ésta usando ropa apropiada y autorizada.

Cualquier modicación a la máquina anúla la garantía y puede causar daños a las personas usando la

máquina mientras esta en el funcionamiento.

REVISE EL PAQUETE A SU LLEGADA

Tras la recepcion de un envio Omcan favor inspeccionar daños externos. Si no hay daños evidentes en el

empaque exterior, Habra el carton para asegurararse que todos los articulos solicitados ésten dentro de la

caja y no encuentre daños ocultos en la máquina. Si el paquete ha sufrido un manejo de poco cuidado, golpes

o daños (visible o oculto) por favor anote en la factura antes de aceptar la entrega y contacte Omcan dentro

de las 24 horas, de modo que podamos iniciar una reclamación con la compañia. Un informe detallado sobre

los daños causados a la máquina debe ser llenado en el plazo de tres días, desde la fecha de entrega que se

muestra en los documentos de envío. Omcan no tiene ningun recurso por productos dañados que se enviaron

a recoger por terceros.

Antes de utilizar cualquier equipo, siempre lea y familiarizarse con todas las instrucciones de

funcionamiento y seguridad.

Omcan le gustaría darle las gracias por la compra de esta máquina. Es de la mayor importancia para

salvar estas instrucciones para futuras consultas. Además, guarda la caja original y el embalaje para el

envío del equipo si servicio técnico o devolución de la máquina que se requiere.

WARNING

When using sh scalers as with any electric tool basic safety precautions should always be followed to

reduce the risk of re, electric shock, and personal injury.

READ ALL INSTRUCTIONS

General Information

Safety and Warranty

5

Safety and Warranty

GROUNDING INSTRUCTIONS

This tool should be grounded while in use to protect the operator from electric shock. The tool is equipped with

a three conductor cord and three prong grounding type plug to t the proper grounding type receptacle. The

green conductor in the cord is the grounding wire. Never connect the green wire to a live terminal.

GENERAL SAFETY PROCEDURES

• Keep work area clean. Cluttered areas invite injury.

• Keep children away. Do not let visitors contact tool or extension cord. All visitors should be kept away from

work area.

• Do not use the tool for any purpose for which it is not intended.

• Dress properly, do not wear loose clothing or jewelry as they can get caught in moving parts.

• Wear safety glasses to protect against ying debris.

• Don’t overreach, keep proper footing and balance at all times.

• Disconnect power cord when not in use, before servicing and when changing exible shafts, handpieces,

and tools.

• Avoid unintentional starting. Be sure switch is off (handpiece holder down) before plugging tool in.

• Stay alert, be aware of what you are doing and others around you. Do not operate the tool when you are

tired.

• Check for damaged parts before use of the tool. Any part damaged such as a guard should be repaired or

replaced by an authorized service center. Do not use tool if switch does not turn it on and off.

RESIDENTIAL USERS: Vendor assumes no liability for parts or labor coverage for component failure

or other damages resulting from installation in non-commercial or residential applications. The right

is reserved to deny shipment for residential usage; if this occurs, you will be notied as soon as

possible.

1 YEAR PARTS AND LABOUR BENCH WARRANTY

Within the warranty period, contact Omcan Inc. at 1-800-465-0234 to schedule a drop off to either

an Omcan authorized service depot in the area, or to an Omcan Service warehouse to repair the

equipment.

Unauthorized maintenance will void the warranty. Warranty covers electrical and part failures, not

improper use.

Please see https://omcan.com/disclaimer for complete info.

WARNING:

The packaging components are classied as normal solid urban waste and can therefore be disposed of

without difculty.

In any case, for suitable recycling, we suggest disposing of the products separately (differentiated

waste) according to the current norms.

6

Technical Specications

Safety and Warranty

Installation

Operation

Model FS-US-0246

Power 0.33 HP / 0.25 kW

RPM 3450

Electrical 110V / 60Hz / 1

Weight 35 lbs. / 15.9 kgs.

Packaging Weight 37 lbs. / 16.8 kgs.

Packaging Dimensions 20” x 20” x 12” / 508 x 508 x 305mm

Item Number 45357

DO NOT DISCARD ANY PACKAGING MATERIALS IN THE ENVIRONMENT!

ASSEMBLY INSTRUCTIONS

BE SURE UNIT IS UNPLUGGED AND SWITCH IS IN THE OFF POSITION BEFORE PROCEEDING.

• Align and insert exible core into motor core adapter.

• Insert outer casing into motor casing adapter until the shoulder on the coupling bottoms out.

• Tighten both socket cap screws using a 3/16” hex key.

• Insert the exible core into the adapter on the hand piece, and then thread hand piece onto exible shaft.

• Hang unit from a secure mounting at a height that allows the shaft to have a gradual arc while the operator

is using the tool.

• The scaler is now ready for use.

Hold the hand piece securely by the knurled anti slip handle. Keep hands away from the cutter head. Lift the

yellow hand piece holder to start the motor. Beginning with the tail end of the sh, slowly move the cutter head

toward the head of the sh. Repeat this motion until all the scales have been removed. When you are nished

scaling turn the power off by pulling the hanger down, and replacing the hand piece on the holder after it has

stopped spinning.

7

Maintenance

The motor and the hand piece use sealed bearings which require no maintenance over their life span.

The life expectancy of the exible shaft can be increased by lubricating the inner core after every one hundred

hours of use. To lubricate the inner core remove the shaft from the motor and then slide the inner exible shaft

our of the rubber housing. Wipe the old grease off and then reinstall the core applying approximately 1/16” of

Omcan food grade lubricant (Item: 31212) along the whole length.

Model FS-US-0246 45357 Hand Piece

Parts Breakdown

8

Parts Breakdown

Model FS-US-0246 45357 Shaft Assembly

Cutters and Guards

9

Parts Breakdown

Power Unit AssemblyModel FS-US-0246 45357

10

Parts Breakdown

Model FS-US-0246 45357 Hand Piece

Shaft Assembly

Cutters and Guards

Power Unit Assembly

Item No. Description Position Item No. Description Position Item No. Description Position

37635 Cover for 45357 2 37629 Screw for 45357 14 37624 Electric Cord for 45357 29

37636 Scaler Shaft Hanger for 45357 4 37633 Switch for 45357 15 37631 Electric Motor for 45357 30

67431 Hanger with Spring Pin, Nut and Acorn

Nut for 45357 4A 67438 Screw for 45357 16 67446 Complete Power Unit without Core and

Casing Adapters for 45357 30A

37637 Stainless Steel Roll Pin for 45357 5 37634 Electric Box for 45357 17 37638 Wiring Harness for 45357 31

67432 Switch Spacer for 45357 6 67439 Bolt for 45357 19 37632 Wire Nut for 45357 32

37622 Ring for 45357 6A 67440 Washer for 45357 20 67447 Core Adapter Standard Duty for 45357 33

67433 Set Screw for 45357 7 67441 Lock Washer for 45357 21 37627 Standard Core Adapter for 45357 33A

67434 Nut for 45357 8 67442 Nut for 45357 22 67448 Set Screw of Core Adapter for 45357 37

67435 Acorn Nut for 45357 9 67443 Hanger for 45357 23 67449 Casing Adapter for 45357 38

67436 Nut for 45357 10 37625 Hanger Assembly for 45357 23A 37628 Casing Adapter for 45357 38A

67437 Lock Washer for 45357 11, 27 67444 Eye Bolt for 45357 24 67450 Socket Cap Screw for 45357 39

37630 Switch Mounting Plate for 45357 12 67445 End Cap for 45357 25 67451 Pan Head Screw for 45357 40

37639 Spacer for 45357 13 37623 Strain Relief for 45357 28

Item No. Description Position Item No. Description Position Item No. Description Position

67410 Cap Bearing for 45357 1 67413 Bearing for 45357 4 67416 Core Adapter for 45357 7

67411 Spindle for 45357 2 67414 Spacer for 45357 5 67417 Casing Adapter for 45357 8

67412 Oil Seal for 45357 3 67415 Housing for 45357 6 41753 Standard Duty Handpiece for 45357 9

Item No. Description Position Item No. Description Position Item No. Description Position

41751 Standard Duty Core Only for 45357 1 41752 Flexible Shaft Casing Only for 45357 2 67418 Complete Shaft Assembly for 45357 3

Item No. Description Position Item No. Description Position Item No. Description Position

67419 Diamond Pattern Cutter for 45357 1 67423 6 Flute Cutter for 45357 5 67427 Guard of 6 Flute Cutter for 45357 8

67420 Diamond Pattern End Cap for 45357 2 67424 6 Flute Cutter End Cap for 45357 6 67428 Guard of 6 Flute Cutter with Set Screw

for 45357 8A

37570 8 Flute Cutter (Small Scale) for 45357 3 67425 Guard of Diamond and 8 Flute Cutter

for 45357 7 67429 Set Screw for 45357 9

67422 8 Flute Cutter End Cap for 45357 4 67426 Guard of Diamond and 8 Flute Cutter with

Set Screw for 45357 7A 67430 Pin of Cutter Assembly for 45357 10

11

Model FS-US-0246 45357

Electrical Schematics

12

Notes

________________________________________________________________________________________

13

Notes

________________________________________________________________________________________

14

Notes

________________________________________________________________________________________

15

Warranty Registration

Gracias por comprar un producto Omcan usted. Para registrar su garantía para este producto, complete la información a continuación,

cortar la tarjeta en la perforación y luego enviarlo a la dirección indicada a continuación. También puede registrarse en línea en:

Merci d’avoir acheté un produit Omcan. Pour enregistrer votre garantie pour ce produit, complétez les informations ci-dessous, détachez la

carte au niveau de la perforation, puis l’envoyer à l’adresse spécié ci-dessous. Vous pouvez également vous inscrire en ligne en visitant:

Thank you for purchasing an Omcan product. To register your warranty for this product, complete the information below, tear off the card at

the perforation and then send to the address specied below. You can also register online by visiting:

OMCAN

PRODUCT WARRANTY REGISTRATION

3115 Pepper Mill Court,

Mississauga, Ontario

Canada, L5L 4X5

https://omcan.com/warranty-registration/

or email to: [email protected]

Purchaser’s Information

Name: Company Name:

Address:

Telephone:

City: Province or State: Postal or Zip: Email Address:

Country: Type of Company:

Restaurant Bakery Deli

Dealer from which Purchased: Butcher Supermarket Caterer

Dealer City: Dealer Province or State: Institution (specify):

Invoice: Other (specify):

Model Name: Model Number: Serial Number:

Machine Description:

Date of Purchase (MM/DD/YYYY): Date of Installation (MM/DD/YYYY):

Would you like to extend the warranty? Yes No



Por correo en Canadá

Pour postale au Canada

For mailing in Canada

Por correo en los EE.UU.

Pour diffusion aux États-Unis

For mailing in the US

OMCAN

PRODUCT WARRANTY REGISTRATION

4450 Witmer Industrial Estates, Unit 4,

Niagara Falls, New York

USA, 14305

Thank you for choosing Omcan | Merci d’avoir choisi Omcan | Gracias por elegir Omcan

Since 1951 Omcan has grown to become a leading distributor of equipment and supplies to the North

American food service industry. Our success over these many years can be attributed to our commitment

to strengthen and develop new and existing relationships with our valued customers and manufacturers.

Today with partners in North America, Europe, Asia and South America, we continually work to improve

and grow the company. We strive to offer customers exceptional value through our qualied local sales

and service representatives who provide convenient access to over 5,000 globally sourced products.

Depuis 1951 Omcan a grandi pour devenir un des “leaders” de la distribution des équipements et

matériel pour l’industrie des services alimentaires en Amérique du Nord. Notre succès au cours de ces

nombreuses années peut être attribué à notre engagement à renforcer et à développer de nouvelles

et existantes relations avec nos clients et les fabricants de valeur. Aujourd’hui avec des partenaires en

Amérique du Nord, Europe, Asie et Amérique du Sud, nous travaillons continuellement à améliorer et

développer l’entreprise. Nous nous efforçons d’offrir à nos clients une valeur exceptionnelle grâce à

nos ventes locales qualiées et des représentants de service qui offrent un accès facile à plus de 5000

produits provenant du monde entier.

Desde 1951 Omcan ha crecido hasta convertirse en un líder en la distribución de equipos y suministros

de alimentos en América del Norte industria de servicios. Nuestro éxito en estos años se puede atribuir

a nuestro compromiso de fortalecer y desarrollar nuevas relaciones existentes con nuestros valiosos

clientes y fabricantes. Hoy con socios de América del Norte, Europa, Asia y América del Sur, que trabajan

continuamente para mejorar y crecer la empresa. Nos esforzamos por ofrecer a nuestros clientes valor

excepcional a través de nuestro local de ventas y representantes de los servicios que proporcionan un

fácil acceso a más de 5,000 productos con origen a nivel mundial.

Omcan FS-US-0246 Manuel utilisateur

Omcan FS-US-0246 Manuel utilisateur

dans d''autres langues

Documents connexes

Autres documents