14. MEMORY FUNCTION (MEMO)
a) Press " " repeatedly until the number you wish appears in the
display, "1","2","3" cup will display in order. One cup is about
120ml. For example, press " " once , "1" appears.
b) Press "
sounds five times and then turn back to waiting state.
12.
REHEAT
a) Press " " repeatedly until the number you wish appears in the
display, "250","350","500" g will display in order.
For example, press " " once , "250" appears.
b) Press " " to cook, buzzer sounds once.When cooking finish,buzzer
sounds five times and then turn back to waiting state.
13.PIZZA
a) Press " " repeatedly until the number you wish appears in the
display, "100","200","400" oz will display in order.
For example, press " " once , "100" appears.
b) Press " " to cook, buzzer sounds once.When cooking finish,buzzer
sounds five times and then turn back to waiting state.
(1) Press "MEMO" to choose memory 1-3 procedure. The LED will display 1,2,3.
(2) If the procedure has been set, press " " to use it. If not, continue to
set the procedure. Only one or two stages can be set.
(3) After finishing the setting, press " " once to save the procedure and
turn back to the waiting states.If press " " again,it will start cooking.
Example: to set the following procedure as the second memory, that is memory 2.
to cook the food with 80% microwave power for 3minutes and 20 seconds.
The steps are as follow:
a. In waiting states, press "
b.Press " " once,then press "3","2","0" in order.
c. Press " " once,"PL10" display,then press "8" and "PL8" displays.
d. Press " " to save the setting. Buzzer sounds once then turn back to
waiting states. If you press " " again, the procedure begins.
e. If the electricity is not cut off, the procedure will be saved all the time. If it is, the
procedure need to reset.
f. If you want to run the saved procedure, in waiting states, press "
screen displays "2", then press " " to run.
11
.
BEVERAGE
" to cook, buzzer sounds once.When cooking finish,buzzer
" twice,stop pressing until the screen displays "2".
" twice,