Maytag MHWE450WR00 Manuel utilisateur

Marque: Maytag

Modèle: MHWE450WR00

Catégorie: Machines à laver

Taper: Manuel utilisateur

PERFORMANCE SERIES

FRONT-LOADING AUTOMATIC WASHER

USE & CARE GUIDE

LAVEUSEAUTOMATIQUE A CHARGEMENT FRONTAL

GUIDE D'UTILISATION ET D'ENTRETIEN

FOR QUESTIONS ABOUT FEATURES, OPERATION/PERFORMANCE,

PARTS, ACCESSORIES OR SERVICE CAll: 1.800.688.9900

IN CANADA, CAll: 1.800.807.6777

VISIT OUR WEBSIIE AT WWW.MAYTAG.COM

IN CANADA, WWW.MAYTAG.CA

Certified to Sanitize

Certifi6 pour aseptiser

461970255072

W10286177 B

AU CANAl)A, POUR ASSISTANCE, INSIAI I i_IION OU SERVICE,

COMPOSER IE : 1.800.807.6777

OU VISITER NOTRE SITE INTERNET

WWW. MAYTAG. CA

Designed to use only HE High Efficiency detergent

Con_:upour I'utilisation d'un ddtergent haute efficacit6 seulement

,i_!_ii!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i_i_i_ii!i¸i!i!i!i!i!i!i!i_i_ii_ii_ii_ii_ii_ii_ii_ii_ii_ii_ii_ii_ii_ii_i_iiiiYiiiiii//li¸il¸iiii_ii,i_ii,i_ii,i_ii,i_ii,i_i_iii_i_ii_il'ii_i_iil'ii_i_iil_i_ii_i_ii_i_ii_ii_i_ii_:ii:_:i_:ii:_:i_:ii:_:i_:ii:_:i_:ii:_:i_:ii:_:i_:ii:_:i_:_i_::¸_iii!ii,l,ii_,,¸¸¸¸_!_iiiiiiiii_i_¸il¸ii_ii_ii¸I¸I¸il¸ii_ii¸ii_ii¸ii_ii¸ii_iil¸ii_i_iil¸I¸iiiii_iiiii_i_i_ii_i_iiiii_ii_iii_ii_iii_iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii_!_!!

TABLE OF CONTENTS

WASHER SAFETY ...................................................................................................................... 3

INSTALLATION REQUIREMENTS ............................................................................................. 4

Tools and Parts ..................................................................................................................... 4

Options ................................................................................................................................ 5

I.ocation Requirements ......................................................................................................... 6

L-)rain System ........................................................................................................................ 8

Electrical Requirements ........................................................................................................ 8

INSTALLATION INSTRUCTIONS ............................................................................................. 9

Remove Transport System .................................................................................................... 9

Connect the Inlet Hoses ..................................................................................................... 10

Connect the L-)rain Hose ..................................................................................................... 10

Secure the L-)rain Hose ....................................................................................................... 11

I_eve[ the Washer ................................................................................................................ 11

Complete Installation ......................................................................................................... 11

FEATURES AND BENEFITS ...................................................................................................... 12

WASHER USE .......................................................................................................................... 13

Starting Your Washer .......................................................................................................... 13

Using the Proper L-)etergent ................................................................................................ 13

Using the L-)ispenser ........................................................................................................... 14

Pausing or Restarting .......................................................................................................... 15

Changing Cycles, Options, and Modifiers .......................................................................... 15

Status Indicator ................................................................................................................... 16

Cycles ................................................................................................................................. 16

Options .............................................................................................................................. 18

Modifiers ............................................................................................................................ 18

LAUNDRY GUIDE .................................................................................................................. 19

LAUNDRY TIPS ....................................................................................................................... 19

I.oading .............................................................................................................................. 20

WASHER CARE ........................................................................................................................ 20

Cleaning Your Washer ....................................................................................................... 20

Water Inlet Hoses ............................................................................................................... 21

Vacation, Storage, and Moving Care .................................................................................. 21

TROUBLESHOOTING ............................................................................................................. 22

ASSISTANCE OR SERVICE ....................................................................................................... 25

In the U.S.A ........................................................................................................................ 25

In Canada ........................................................................................................................... 25

WARRANTY ............................................................................................................................ 26

ii!!i!ii!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!iiii!il¸!I¸_!_!_!_!_!_!iiiiii__ii_i__ii_i__ii_i__ii_i__ii_i__ii_i__ii_i__ii_iiiiiYiiiiiiI__¸i¸il¸iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiliiilii_ii¸ii_ii_i_iiiii_i_i_iiiiii:ii:i:ii:ii:i:ii:ii:i:ii:ii:i:ii:ii:i:ii:ii:i:ii:i:i:ill_iJiiiiiiiiiiiiiii__!!!i!iiii_!iii_!iii_!iii_!iii_!ii_i_!ii_i_!ii_i_!ii_i_!ii_i_!ii_i_!iii_!iiiiiiiiI_ii_iiii_ii_iii_i_ii_iii_iii_iii_iii_iiii_iiii_ii_ii_i_iii_ii_iiii_i_i_iii_i_ii_i_:ii_ii_i_:ii_ii_i_:ii_ii_i_:ii_ii_i:_iiii_iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii

TABLE DES MATIERES

SI_CURITI_ DE LA LAVEUSE ..................................................................................................... 27

EXIGENCES DqNSTALLATION ............................................................................................... 29

Outillage et pi_ces .............................................................................................................. 29

Options .............................................................................................................................. 29

Exigences d'emplacement .................................................................................................. 30

Syst_'me de vidange ............................................................................................................ 32

Sp6cifications 6[ectriques ................................................................................................... 32

INSTRUCTIONS DqNSTALLATION ....................................................................................... 2,3

Elimination des accessoires de transport ............................................................................ 33

Raccordement des tuyaux d'a[imentation ........................................................................... 34

Raccordement du tuyau de vidange ................................................................................... 34

Immobilisation du tuyau de vidange .................................................................................. 35

R6g[age de ['aplomb de [a [aveuse ..................................................................................... 35

Achever ['installation .......................................................................................................... 36

CARACTI_RISTIQUES ET AVANTAGES ................................................................................... 2,6

UTILISATION DE LA LAVEUSE ............................................................................................... 2,7

Mise en marche de Ha[aveuse ............................................................................................ 38

Utilisation du d6tergent appropri6 ...................................................................................... 38

Uti[isation du distributeur ................................................................................................... 39

Pause ou remise en marche ............................................................................................... 40

Changement des programmes, options et modificateurs .................................................... 40

T6moins [umineux .............................................................................................................. 41

Programmes ....................................................................................................................... 41

Options .............................................................................................................................. 43

Modificateurs ..................................................................................................................... 43

GUIDE DE LESSIVAGE ............................................................................................................ 44

CONSEILS DE LESSIVAGE ....................................................................................................... 45

Chargement ........................................................................................................................ 45

ENTRETIEN DE LA LAVEUSE ................................................................................................... 46

Nettoyage de Ha[aveuse ..................................................................................................... 46

Tuyaux d'arriv6e d'eau ....................................................................................................... 47

Pr6cautions _ prendre avant [es vacances,

un entreposage ou un d6m6nagement ................................................................................ 47

DI'PANNAGE .......................................................................................................................... 48

ASSISTANCE OU SERVICE ...................................................................................................... 52

Aux Etats-Unis .................................................................................................................... 52

Au Canada ......................................................................................................................... 52

GARANTIE ............................................................................................................................... 53

Your safety and the safety of others are very important.

We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety

messages.

This is the safety alert symbol.

This symbol alerts you to potential hazards that can kill or hurt you and others.

All safety messages will follow the safety alert symbol and either the word "DANGER" or "WARNING."

These words mean:

You can be killed or seriously injured if you don't immediatel_ Z

follow instructions.

You can be killed or seriously injured if you don't follow

instructions.

All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what can

happen if the instructions are not followed.

2,',',i'i

iMPORTANT SAFETY iNSTRUCTiONS

WARNING: To reduce the risk of fire, electric shock, or injury to persons when using the washer, follow basic precautions,

including the following:

[] Read all instructions before using the washer.

[] Do not wash articles that have been previously cleaned

in, washed in, soaked in, or spotted with gasoline,

dry-cleaning solvents, other flammable, or explosive

substances as they give off vapors that could ignite or

explode.

[] Do not add gasoline, dry=cleaning solvents, or other

flammable, or explosive substances to the wash water.

These substances give off vapors that could ignite or

explode.

[] Under certain conditions, hydrogen gas may be

produced in a hot water system that has not been used

for 2 weeks or more. HYDROGEN GAS IS

EXPLOSIVE. if the hot water system has not been

used for such a period, before using the washing

machine, turn on all hot water faucets and let the water

flow from each for several minutes. This will release

any accumulated hydrogen gas. As the gas is

flammable, do not smoke or use an open flame during

[] Do not allow children to play on or in the washer. Close

supervision of children is necessary when the washer is used

near children.

[] Before the washer is removed from service or discarded,

remove the door or lid.

[] Do not reach into the washer if the drum, tub or agitator is

moving.

[] Do not install or store the washer where it will be exposed to

the weather.

[] Do not tamper with controls.

[] Do not repair or replace any part of the washer or attempt any

servicing unless specifically recommended in this manual or in

published user-repair instructions that you understand and

have the skills to carry out.

[] See "Electrical Requirements" for grounding instructions.

this time.

SAVE THESEINSTRUCTIONS

State of California Proposition 65 Warnings:

WARNING: This product contains a chemical known to the State of California to cause cancer.

WARNING: This product contains a chemical known to the State of California to cause birth defects or other reproductive harm.

INSTALLATION REQUIREMENTS

Gather the required tools and parts before starting installation. The parts supplied are in the

washer drum.

Tools needed for connecting the water inlet hoses

• Pliers (that open to 1"/.," [39.5 ram])

Tools needed for connecting the drain hose

• Locking pliers (that open to 1_//' [39.5 mm])

• Flashlight (optional)

Toolsneededforinstallation

• Open end wrenches 17 mm and 13 mm

• I.evel

• Wood block

• Ruler or measuring tape

Parts supplied:

Pedestal

A pedestal will add to the total height of the washer for a total height of 53.5" (1359 ram).

A. Drain hose form

B. Inlet hose (2)

C. Inlet hose washers (4)

D. 7)ansport bolt hole plug (4)

E. Beaded strap

£ Drain hose

C. Hose clamp

Alternate Parts

Your installation may require additional parts. If you are interested in purchasing one of the

items listed here, call the toll-free number on the cover or in the "Assistance or Service"

section.

If You Have You Will Need to Buy

Laundry tub or standpipe Sump pump system (if not already available)

taller than 96" (2.4 m)

Overhead sewer Standard 20 gal. (76 I.), 30" (762 mm) tall drain tub or

utility sink and sump pump (available from local plumbing

suppliers)

Floor drain Siphon break, Part Number 285834; additional drain hose

Part Number 8318155; and connector kit, Part

Number 285835

Drain hose too short 4 ft (1.2 m) drain hose extension kit, Part Number 285863

Water faucets beyond reach 2 longer water fill hoses:

of fill hoses 6 ft (1.8 m) Part Number 76314,

10 ft (3.0 m) Part Number 350008

Optional pedestal

This pedestal is available in several colors.

To orde,; call the dealer from whom you purchased you, washer or refer to the "Assistance

or Service" section.

Pedestal Height Color Part Number

10" (254 mm) White MHP1000SQ

10" (254 mm) Black MHP1000SB

15.5" (394 mm) White XHP1550VW

15.5" (394 mm) Black XHP1550VB

15.5" (394 mm) Slate XHP1550VE

15.5" (394 mm) Crimson Red XHP1550WR

15.5" (394 mm) Oxide XHP1550VJ

15.5" (394 mm) Evergreen XHP1550VP

Stack Kit

:ZI

Are you planning to stack your Maytag washer and dryer? To do so you will need to purchase

a Stack Kit.

To order; call the dealer from whom you purchased your dryer or refer to the "Assistance or

Service" section. Ask for Part Number 8212640.

Selectingtheproperlocationforyourwasherimprovesperformanceandminimizesnoiseand

possiblewasher"walk."

Yourwashercanbeinstalledunderacustomcounter,orinabasement,laundryroom,closet,

orrecessedarea.See"DrainSystem."

Companionappliancelocationrequirementsshouldalsobeconsidered.Properinstallationis

yourresponsibility.

You will need

• A water heater set to deliver 120°F (49°C) water to the washer.

• A grounded electrical outlet located within 6 ft (1.8 m) of where the power cord is

attached to the back of the washer. See "Electrical Requirements."

• Hot and cold water faucets located within 4 ft (1.2 m) of the hot and cold water fill valves,

and water pressure of 20-100 psi (137.9-689.6 kPa).

Washer Dimensions

52V2"

_(1335

• A level floor with a maximum slope of 1" (25 mm) under entire washer. Installing the

washer on soft floor surfaces, such as carpets or surfaces with foam backing, is not

recommended.

(820ram)

• A sturdy and solid floor to support the washer with a total weight (water and load) of

400 [bs (180 kg).

Do not operate your washer in temperatures below 32°F (0°C). Some water can remain in the

washer and can cause damage in low temperatures.

Installation clearances

• The location must be large enough to allow the washer door to be fully opened.

• Additional spacing should be considered for ease of installation and servicing.

• Additional clearances might be required for wall, doob and floor moldings.

• Additional spacing of 1" (25 mm) on all sides of the washer is recommended to reduce

noise transfer.

Recommended installation spacing for custom undercounter installation

The dimensions shown are for the recommended spacing.

Custom undercounter installation - Washer only

(

39"rnin,

(990ram}

• Companion appliance spacing should also be considered.

(25ram} (686ram} (25ram}

Recommended installation spacing for recessed or closet installation,

with or without a pedestal

The dimensions shown are for the recommended spacing.

Recessed area or closet installation

*Required spacing

34" ' 48 in.2.

(310crn2}

-- (864ram}

24 n2. -,

(155cm2) '

11"_-31'/2""_1 4" _"-

(25ram}(800mm}(102ram}

--_ 3"

(76ram}

3,,

(76ram)

A B

A. Side view - closet or confined area

B.Closet door with vents

Recessed or closet installation - Washer on pedestal

1".-_1_-- 27"--_1_,.1"

(25mm} (686mm} (25mm}

18"rain._

(457ram}

11"_ 31y_"_1 4"

(25mm)(a00 ram)(102ram)

A. Recessed area

B. Side view - closet or confined area

Recommended installation spacing for recessed or closet installation,

with stacked washer and dryer

The dimensions shown are for the recommended spacing.

48 in,2*

(310cm2)

3"* (76mm)

24 in,2* '_

(155cm2)

i:/'¸ ]//ii/

1"* (25ram)

*Required spacing

51/2''** _ _ _- 1"

(140ram) (25mm)

76"

(1930ram) _

1" _ _ 27"-_

(25ram) {686 mm)

*Required spacing

** For venting out the side, 1" (25 mm) spacing is allowed.

Z'I

Recommended installation spacing for cabinet installation

• The dimensions shown are for the recommended spacing.

• For cabinet installation, with a doo_, the minimum ventilation openings in the top are

required.

7"(178rnrn) 7"(176rnrn}

4" 311/2'' 1" 1" 27" 1"

(102turn} (800rnrn}(25rnrn}(25rnrn}(686rnrn} (25rnrn}

The washer can be installed using the standpipe drain system (floor or wall), the laundry tub

drain system, or the floor drain system. Select the drain hose installation method you need.

See "Tools and Parts."

Standpipe drain system - wall or floor (views A & B)

The standpipe drain requires a minimum diameter standpipe of 2" 150 rn). The rnmirnurn

carry-away capacity can be no less than 17 gal. (64 I.) per minute.

The top of the standpipe must be at least 30" (762 m) high and no higher than 96" (2.4 m)

from the bottom of the washer.

39"rnin.

(762ira)

Laundry tub drain system (view C)

The laundry tub needs a minimum 20 gal. (76 I.) capacity. The top of the laundry tub must be

at least 30" (762 mm) above the floor.

Floor drain system (view D)

The floor drain system requires a siphon break that may be purchased separately. See "Tools

and Parts."

The siphon break must be a minimum of 28" (710 mm) from the bottom of the washer.

Additional hoses might be needed.

Electrical Shock Hazard

Plug into a grounded 3 prong outlet.

Do not remove ground prong.

Do not use an adapter.

Do not use an extension cord.

Failure to follow these instructions can result in death,

fire, or electrical shock.

• A 120 volt, 60 Hz., AC only, 15- or 20-amp, fused electrical supply is required. Time-

delay fuse or circuit breaker is recommended. It is recommended that a separate circuit

serving only this washer be provided.

This washer is equipped with a power supply cord having a 3 prong grounding plug.

To minimize possible shock hazard, the cord must be plugged into a mating, 3 prong,

grounding-type outlet, grounded in accordance with local codes and ordinances. If a

mating outlet is not available, it is the personal responsibility and obligation of the

customer to have the properly grounded outlet installed by a qualified electrician.

If codes permit and a separate ground wire is used, it is recommended that a qualified

electrician determine that the ground path is adequate.

Check with a qualified electrician if you are not sure the washer is properly grounded..

GROUNDING INSTRUCTIONS

For a grounded, cord-connected washer:

This washer must be grounded, in the event of a malfunction

or breakdown, grounding will reduce the risk of electrical

shock by providing a path of least resistance for electric

current. This washer is equipped with a cord having an

equipment-grounding conductor and a grounding plug. The

plug must be plugged intoan appropriate outlet that is

properly installed and grounded in accordance with all local

codes and ordinances.

WARNING: Improper connection of the equipment-

grounding conductor can result in a risk of electric shock.

Check with a qualified electrician or serviceman if you are in

doubt as to whether the appliance is properly grounded.

Do not modify the plug provided with the appliance - if itwill

not fit the outlet, have a proper outlet installed by a qualified

electrician.

For a permanently connected washer:

This washer must be connected to a grounded metal,

permanent wiring system, or an equipment grounding

conductor must be run with the circuit conductors and

connected to the equipment-grounding terminal or lead on

the appliance.

Excessive Weight Hazard

Use two or more people to move and install washer.

Failure to do so can result in back or other injury.

IMPORTANT: Position the washer so that the rear of the washer is within approximately

3 ft (900 mm) of its final location.

There are 4 bolts in the rear panel of the washer that support the suspension system during

transportation. These bolts also retain the power cord inside the washer until the bolts are

removed.

1. Using a 13 mm wrench, loosen each of the bolts.

2. Once the bolt is loose, move it to the center of the hole and completely pull out the bolt,

including the plastic spacer covering the bolt.

....6.

HHZ'

3. Once all 4 bolts are removed, discard bolt and spacers. Then pull the power cord through

the opening of the rear panel and close the hole with the attached cap.

4. Close the bolt holes with the 4 transport bolt hole plugs.

NOTE: If the washer is to be transported at a later date, call your local service center. To avoid

suspension and structural damage to your washer, it must be properly set up for relocation by

a certified technician.

i_"_ _ _,,_t _ ,-_ _ "_ _

Insert new flat washers (supplied) into each end of the inlet hoses. Firmly seat the washers

in the couplings.

A B

A. Coupling

B. Washer

Make sure the washer drum is empty.

Attach the hose with the red color indicator to the Hot (left) inlet valve. Attaching the red

coupling first makes it easier to tighten connection with pliers. Screw on coupling by

hand until it is seated on the washer.

Attach the hose with the blue color indicator to the Cold (right) water inlet valve. Screw

on coupling by hand until it is seated on the washer.

J f-_

H. Hot water inlet

C. Cold water inlet

Using pliers, check the tightness of the hose couplings already attached to the washer.

NOTE: Do not overtighten. Damage to the coupling can result.

Attach hot water hose to the hot water faucet. Screw on coupling by hand until it is seated

on the washer.

Attach cold water hose to the cold water faucet. Screw on coupling by hand until it is

seated on the washer.

Using pliers, tighten the couplings with an additional two-thirds turn.

NOTE: Do not overtighten. Damage to the coupling can result.

9. Turn on the water faucets and check for leaks.

NOTE: Replace inlet hoses after 5 years of use to reduce the risk of hose failure.

Record hose installation or replacement dates on the hoses for future reference.

10. Periodically inspect and replace hoses if bulges, kinks, cuts, wear, or leaks are found.

Remove drain hose from washer drum

1. Use locking pliers, squeeze hose clamp tabs together and insert over the end of drain

hose.

2. Slide drain hose onto washer connection.

3. Once drain hose is in place, release pliers.

4. Washer drain system can be installed using a floor drain, wall standpipe, floor standpipe,

or laundry tub.

| 0

Laundry tub drain or standpipe drain

Connect the drain hose form to the corrugated drain hose.

A. Snap either end of the drain hose form to the drain hose at the

point where the conugation begins.

B. Bend drain hose over drain hose fom_ and snap into place.

To keep drain water from going back into the washer:

• Do not straighten the drain hose, and do not force excess drain hose into standpipe.

Hose should be secure, but loose enough to provide a gap for air.

• Do not lay excess hose on the bottom of the laundry tub.

Floor drain

You may need additional parts. See Floor drain under "Tools and Parts."

Drape the power cord over the washer top.

Secure the drain hose to the laundry tub leg or standpipe with the beaded strap provided.

(See illustrations A and B).

A B C

If the washer faucets and the drain standpipe are recessed (see illustration C), put the

hooked end of the drain hose in the standpipe. Tightly wrap the beaded strap around the

water inlet hoses and the drain hose.

Do not force excess drain hose into the standpipe.

Properly leveling your washer avoids excessive noise and vibration.

1. Check the levelness of the washer by placing a [eve[ on the top edge of the washer, first

side to side, then front to back.

If the washer is against a wail, move the washer out slightly before tipping back. If the

washer is not [eve[, first prop the front with a wood block and adjust the feet as necessary;

then prop the back and adjust feet as necessary. Repeat this step until washer is [eve[.

Make sure a[[ four feet are stable and resting on the floor. Then check that the washer is

perfectly [eve[ (use a [eve[).

After the washer is [eve[, use a 17 mm open-end wrench to turn the nuts on the feet tightly

against the washer cabinet.

IMPORTANT: A[[ four feet must be tightened. If the nuts are not tight against the washer

cabinet, the washer may vibrate.

The washer should not move front to back, side to side, or diagonally when pushed on its

top edges.

Slide the washer to its final location.

Confirm the levelness of the washer.

1. Check the electrical requirements. Be sure that you have the correct electrical supply and

the recommended grounding method. See "Electrical Requirements."

2. Check that a[[ parts are now installed. If there is an extra part, go back through the steps to

see which step was skipped.

3. Check that you have a[[ of your tools.

4. Dispose of/recycle a[[ packaging materials.

5. Check that the water faucets are on.

Check for leaks around faucets and inlet hoses.

Electrical Shock Hazard

Plug into a grounded 3 prong outlet.

Do not remove ground prong.

Do not use an adapter.

Do not use an extension cord.

Failure to follow these instructions can result in death,

fire, or electrical shock.

Plug into a grounded 3 prong outlet.

Read "Washer Use."

To test and dean your washer, make sure there are no clothes in the washer and add one

AFFRESH r,_ tablet to the washer drum. Select POWER/CANCEl_, the Clean Washer cycle,

and then select START/PAUSE. This cycle wi[[ take approximately 50 minutes to

complete. Allow the washer to complete the entire Clean Washer Cycle without

interruption.

_i!!_ii!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!iiii!ii!i¸_!_!_iii_i_i;iii!i;_i_iiYii_:_i:i;:i;:ii:i;:ii:i;:ii:i;:ii:i;:ii:i;:ii:i;:;ii1i!iii_i_i_i_i_i_i_i_i_ii¸;;i;_ii¸iiii_i_ii_;i;'ii_ii_;i;'ii_ii_;i;'i;'ii'i;'ii'ii_:_ii,i,i,l,ii_ii,ii_ii,ii_iii:i:i:i;:iii_ii_i;:i;ii!:::_:i_i_¸¸::::;:;;;;;ii_ii;;i;_i;_;i;_;_;_i;_;_iii_iii_ii_i;;ii_ii_i;;ii_ii_i;;ii_ii_i;;i;_i;;ii_ii_i;;ii_ii_i;;i;_ii_ii_i_ii_i_ii_i_ii_i_ii_i_ii_i_ii_:_:_i:_ii)_ii_i;ii_i_i_iii_:i_:i;:i;:i_ii_i_ii_i_;i:_ii1iii!i;;;;;;;i;i¸¸;;;;;;;;;;;;;;;;;;;;;;;;;;;;I!_!

FEATURES AND BENEFITS

Electronic Controls

Flexible electronic controls are easy to use whether, you are a beginner or an expert.

Smart Dispensers

The Smart Dispensers make your washer truly automatic. This washer provides a three-

compartment dispenser which includes separate compartments for main wash detergent,

fabric softenec and chlorine bleach. The dispenser has large pour zones. The dispenser is

self-cleaning, and can be easily removed. I_aundry products are diluted with fresh water and

added to the load at the proper time in the wash cycle.

Clean Washer with AFFRESH TM Cycle

This cycle uses steam to raise the temperature of the unit and makes the washer self-cleaning,

flushing the machine's interior free of dirt and other residue. The use of AFFRESH r_,washer

cleaner or liquid chlorine bleach with this cycle wi[[ remove and help avoid odor-causing

residue.

Auto Water Level

This washer automatically adjusts water level for optimal cleaning and rinsing performance.

Two sensors determine load size, load composition, and suds level, then the sensors adjust

the water level to the proper setting. This eliminates guesswork. The water level is just right

for every wash load size.

Super Size Capacity

Since there is no agitator, you can wash largeb bulkier items such as a king-sized bedspread.

You are also able to wash more clothes at one time, which means fewer loads.

Smooth Balance _M Balance System

To reduce washer "walk" and "off-balance" conditions, your new washer combines:

• 2 Springs to isolate vibration

• 4 Shock absorbers at the washer base to minimize movement

Commercial Quality Stainless Steel Drum

The commercial quality stainless steel drum eliminates corrosion and enables higher spin

speeds for more water extraction, reducing drying time compared to traditional front-load

washers.

High-Efficiency Wash System

Your new front-loading, high-efficiency washer saves time with fewer, larger loads, and lowers

your water and energy bills by helping conserve resources.

Spin Speeds

This washer automatically selects the spin speed based on the cycle selected. This factory

setting can be changed, however. This washer offers up to five different spin speed choices.

Heating Element

This washer has a heating element that automatically heats the water to the optimal

temperature on select cycles. This enables stepped cleaning, a process in which warm water

is brought in and mixed with detergent first, then the water is heated. Stepped cleaning starts

the wash cycle with warm water to help remove stains (such as blood and grass). This heater is

active in the Whitest Whites, Heavy Duty, Normal/Casual, and Power Wash cycles.

Automatic Temperature Control

The automatic temperature control electronically senses and maintains a uniform water

temperature. Automatic temperature control regulates incoming hot and cold water.

Automatic temperature control is automatically turned on when a cycle is selected.

Add Clothes

Clothes can be added to the load during the first 8 minutes of the cycle. During this time,

the Status Indicator wi[[ indicate it is okay to add clothes.

Special Cleaning Action with Sensi-Care _ Wash System

This washer channels 100% of the water through the dispensers to assure thorough rinse-out

and mixture of all the laundry products before they touch any garments. The water is then

sprayed from the top front onto the center of the load, providing even distribution, and

optimum cleaning performance. It is normal for small amounts of water to remain in the

dispensers when the wash cycle is complete.

Efficient Detergent System Dynamic Off-Balance Detection

This washer has a specially designed valve that closes during the wash portion of the cycle This washer uses two sensors to detect load size and the amount of off-balance within the

so that 100% of the water and detergent mixture is used on the load. The Efficient I)etergent load. The suspension system and controls are specially designed to redistribute the load

System ensures that no water or detergent is wasted, automatically.

WASHER USE

HO00 SERIES

4s(u fl

MCT May ag Co r inertia Techrlo ogy _,,,_ fresh spin

power - cancel start • paLse

norma|,

O O ....

hoov OO

............. Ww_i;tesst sanitary

power wash

drai lean washer

. kha_esh

& spl

£-""""'-/

n nse & spin _ /door locked

p,_ss _a/tse to UT_[OCk

options

senstngestimated time[[[

delay add wash ,_se _p_ donc

_o_h_

_extrahi_

III ATeho_ S _h

heavy _ ATCwarmrins_ _ medium

i _o,ma_ I ATCw_rrn I _ow

III _i_ht g cold i _ospm

NOTE: The panel shown above may be different from that of your model.

Fire Hazard

Never place items in the washer that are dampened

with gasoline or other flammable fluids.

No washer can completely remove oil.

Do not dry anything that has ever had any type of oil on

it (including cooking oils).

Doing so can result in death, explosion, or fire.

WARNING: To reduce the risk of fire, electric shock, or injury to persons, read the

IMPORTANT SAFETY INSTRUCTIONS before operating this appliance.

The following is a guide to using your washer. Please refer to specific sections of this manual

for more detailed information.

Do not store laundry products on the top surface of this washer. Vibration is normal during

operation.

Use only High Efficiency detergents. The package for this type of detergent will be marked

"HE" or "High Efficiency." This wash system, along with less wateB will create too much

sudsing with a regular non-HE detergent. Using regular detergent will likely result in washer

errors, longer cycle times, and reduced rinsing performance. It may also result in component

failures and noticeable mold or mildew. HE detergents are made to produce the right amount

of suds for the best performance. Follow the manufacturer's instructions to determine the

amount of detergent to use. Remembec concentrated detergents such as 2x or higher will use

less detergent based on load size.

Use only H_ High _fficiency detergent.

First Wash Cycle Without Laundry

Before washing clothes for the first time, if not completed during the final installation step,

choose the Normal/Casual cycle and run it without clothes. Use only HE High Efficiency

detergent. Use _/_the manufacturer's recommended amount for a medium-size load. This

initial cycle serves to ensure the interior is dean before washing clothes.

For All Wash Cycles

1. Open the washer door by pulling on the handle. Sort laundry according to color and type

of fabric. Place a load of sorted clothes in the washer. Do not overload washer.

Overloading can cause poor cleaning.

• The washer can be fully loaded, but not tightly packed. Washer door should close easily.

• Mix large and small items and avoid washing single items. I_oad evenly.

• It is recommended that you wash small items such as infant socks in a mesh garment bag.

• When unloading garments, occasionally check under the gray colored sea[ at the

front of the tub for small items.

Close the washer door by pushing it firmly until the lock clicks. The washer door will

remain locked during the wash cycle.

NOTE: After any wash cycle is completed, the door must be opened and then closed

before a new cycle can begin. The door can be opened only if START/PAUSE or POWER/

CANCEl_ is selected while the status indicator is in the Add Clothes area or if the cycle has

been canceled. See "To cancel a cycle" in Changing Cycles, Options, and Modifiers

section.

3. Open the dispenser drawer and add laundry products to the main wash detergent,

chlorine bleach, or fabric softener compartments. Close drawer slowly to avoid spills. See

"Using the Dispenser."

4. Turn on the washer by selecting POWER/CANCEl_. Select one of the cycles by turning the

cycle selector. The indicator light for the selected cycle will illuminate. When selecting a

wash cycle, the preset Options, Wash Temp, Spin Speed, and Soil I.eve[ for the selected

cycle will illuminate. The display shows the estimated time remaining. The preset settings

provide the recommended fabric care for the selected cycle. See "Cycles."

5. Select the desired Options, such as Max Extract TM, Extra Rinse, and Soak Time. Not all

options are available with all cycles. See "Options."

6. Select the desired Modifiers, such as Soil I_eve[, Wash Temp, and Spin Speed. Not all

modifiers are available with all cycles and options. See "Modifiers."

7. If desired, select SIGNAl_ ON/OFF. The signal is helpful when you are washing items that

should be removed from the washer as soon as it stops.

8. To begin the wash cycle immediately

Select START/PAUSE.

• If you do not select START/PAUSE within 60 minutes of choosing a cycle, the washer

automatically shuts off.

When the wash cycle is complete, the status indicator shows Done, the door unlocks,

and the wash load can be removed from the washer. The washer powers down

automatically 5 minutes after the cycle is complete. To power down the washer

manually after the wash cycle is complete, select POWER/CANCEl. once.

Your new washer has a dispenser drawer with three separate compartments for your laundry

products--one is for detergent, one is for liquid chlorine bleach, and one is for liquid fabric

softener. I.aundry products are diluted and dispensed automatically at the proper time during

the wash cycle, making it unnecessary for you to return to the washer during the cycle to add

them.

It is normal for small amounts of water to remain in the dispensers when the wash cycle

is complete.

Do not put laundry products directly into the wash tub. Always use the proper dispensers

when adding laundry products.

Choosing the Right Detergent

Use only High Efficiency detergents. The package for this type of detergent will be marked

"HE" or "High Efficiency." This wash system, along with less water, will create too much

sudsing with a regular non-HE detergent. Using regular detergent will likely result in washer

errors, longer cycle times, and reduced rinsing performance. It may also result in component

failures and noticeable mold or mildew. HE detergents are made to produce the right amount

of suds for the best performance. Follow the manufacturer's instructions to determine the

amount of detergent to use. Remember, concentrated detergents such as 2x or higher will use

less detergent based on load size.

Use only HE High Efficiency detergent.

To fill dispenser compartments

1. Pull out the dispenser drawer.

2. Add the desired laundry product to the proper compartment.

3. Push in the dispenser drawer slowly and completely (to avoid a spill).

...........

Dispenser

A. Detergent type selector

B. Main wash compartment

C. Dispenser release lever

D. Chlorine bleach compartment

E. fabric softener compartment

Main wash compartment

(I.etter B in Dispenser Illustration)

Add liquid or powdered HE detergent to this compartment for your wash cycle. The detergent

type selector (A) must always be in the correct position for the detergent type used. Slide the

detergent type selector to the correct position.

IMPORTANT:

• I.iquid or powdered color-safe bleach may be added to the Main Wash compartment

along with the same type of liquid or powdered detergent.

• Use the detergent and color-safe bleach manufacturer's recommended amount for

load size.

• If you are using the Delay Wash option, powdered laundry products should be used

in the main wash compartment because liquid products may seep out of the

compartment before the main wash begins.

• I.iquid detergent:

UQUI

Selector in position for liquid detergent

A. Detergent type selector

• Powdered detergent:

I I PREWA HA"

LIQUI

Selector in position for powdered detergent

A. Detergent type selector

Chlorine bleach compartment

(I.etter I_)in Dispenser Illustration)

Add no more than 2/-4cup (160 ml) liquid chlorine bleach to this compartment. The bleach

will be automatically diluted and dispensed at the best time during the first rinse after the

wash cycle. This compartment cannot dilute powdered bleach.

• Always measure liquid chlorine bleach. Use a measuring cup with a pour spout; do not

guess. Follow the manufacturer's directions for proper use.

• Do not fill beyond the "MAX" [eve[. Overfilling could cause garment damage.

Fabric softener compartment

(letter E in Dispenser Illustration)

Pour measured liquid fabric softener into the fabric softener dispenser, if desired.

NOTES:

• Pour only liquid fabric softener into the dispenser.

• I)0 not overfill. The dispenser holds V4cup (60 miD.

• The fabric softener is dispensed in the rinse cycle. If Extra Rinse is selected,

the fabric softener will be dispensed during the Extra Rinse.

• I)0 not use fabric softener dispensing balls in this washer. Dispensing balls will not

operate correctly with this washer.

• I)0 not spill or drip any fabric softener onto the clothes.

• At the end of the cycle, a small amount of water may be left in the dispenser.

This is normal.

'1_ . , .!4 +_

............." I !:sl:a"t ni!i

Pa .s g ,.,,.....

To pause the washer at any time, select START/PAUSE.

To continue the cycle, select START/PAUSE (for approximately 1 second).

Not all Options and Modifiers are available with all cycles. Cycles, Options, and Modifiers

can be changed anytime before START/PAUSE is selected.

Options and Modifiers can be changed anytime after START/PAUSE is selected and before

the start of the selected Option or Modifier.

To cancel a cycle and begin a new cycle

1. Select POWER/CANCEl. twice.

2. Select desired cycle.

3. Select the desired OPTIONS.

4. Select START/PAUSE (for approximately 1 second) to restart the washer at the beginning

of the new cycle.

To cancel a cycle

1. Select POWER/CANCEl. once.

2. The washer powers down, the door unlocks, and clothes can be removed.

NOTE: If the water [eve[ or the temperature is too high, the washer win drain automatically

before the door unlocks.

.........!7,7,7,"

_1,.i0

;]]

To change Options or Modifiers after the cycle has started

1. Select START/PAUSE once.

2. Select the desired OPTIONS or MODIFIERS.

3. Select START/PAUSE (for approximately 1 second) to continue the cycle.

To drain the washer manually

1. Select START/PAUSE once.

2. Select DRAIN/SPIN.

3. Select START/PAUSE (for approximately 1 second) to begin the drain.

4. When the spin is complete, the door unlocks. Items can be removed from the washer.

This indicator shows which portion of the cycle the washer is operating and the estimated

time remaining. It also indicates when you can add an additional item to the wash cycle

and when the controls are locked.

estimated time remaining

sensing estimated time [m

delay add wash rinse spin dane

clothes

To unlock the controls

Select and hold CONTROl. I.OCK for 3 seconds until the Control I.ock status light turns off.

Door Locked

When the status light illuminates, the door is locked.

Estimated time remaining

The cycle time varies automatically based on your water pressure, water temperature,

detergent, and clothes load. The cycle time will be extended if oversudsing occurs or the load

is unbalanced. The SUDs routine removes extra suds and assures proper rinsing of your

clothes. During the unbalance routine, the time displayed may pause until this activity is

complete, then resume with the cycle. These routines may add up to a half-hour to the default

cycle time.

Cycles can be selected by turning the Cycle control knob to the desired cycle. Each cycle

is designed for different types of fabric and soil levels.

Adding items

This washer allows an 8-minute period in which other garments may be added to the load.

You can add items to the washer if the status indicator shows Add Clothes.

To add items

1. Select START/PAUSE once. The washer door unlocks, and items can be added.

2. To continue the cycle, dose the door and select START/PAUSE (for approximately

1 second).

3. To unlock the door after the Add Clothes period, press POWER/CANCEl. twice.

This will cancel the Wash Cycle.

Cycle done

The cycle done indicator stays on for 60 minutes, until the door of the washer is opened,

or the Power/Cancel button is pressed.

Locking controls

The Control I_ock avoids unintended use of the washer. You can also use the control lock

feature to avoid unintended cycle or option changes during a cycle. When Control I.ock light

is [it during a cycle, all buttons are disabled except for the Control I.ock, Power/Cancel, and

Start/Pause buttons.

To lock the controls

Select and hold CONTROl. I.OCK button for 3 seconds.

cnatrol lock

hold 3 seconds

The CONTROL LOCI< status light illuminates.

Each cycle has a preset Soil I_evel (cycle time), Water Temperature, and Spin Speed, and

may have preset options. The preset settings provide the recommended fabric care for the

selected cycle.

The preset settings can be changed anytime before START is pressed. Not all options and

modifiers are available with all cycles. (To change settings after the cycle has started, press

PAUSE once, then select the desired settings. Press START again to continue the cycle.)

Whitest Whites

This cycle is especially designed for cleaning loads of soiled white fabrics with the addition of

bleach. Hot washing temperatures assure optimal bleach activity. An additional rinse provides

optimal rinse performance to avoid chlorine residues on your laundry. This cycle combines

high-speed tumbling, longer wash time, and fast-speed spin to shorten drying time.

Heavy Duty

Use this cycle to wash loads of sturdy, colorfast fabrics and heavily soiled garments. This cycle

combines fast-speed tumbling, optimal wash time, and extra high speed spin to shorten

drying times. If the water temperature is lower than needed for this cycle, the heater will

warm the water to the optimum temperature.

Normal/Casual

Use this cycle to wash normally soiled cottons and linens. This cycle combines medium-

speed tumbling and high-speed spin.

Delicate

Use this cycle to wash no-iron fabrics and garments labeled "Permanent Press" or "Wrinkle

Free" or that indicate using a "Gentle" cycle on the care label. This cycle combines low-speed

tumbling and low-speed spin to help reduce wrinkling.

Quick Wash

Use this cycle to wash small loads of lightly soiled garments that are needed in a hurry. This

cycle combines fast-speed tumbling, a shortened wash time, and extra high speed spin to

shorten drying time.

Sanitary

Cycles certified by NSF International, an independent, third party testing and certification

organization are those with the sanitize temperature selection available. The certification

verified that these cycles reduce 99.9% of bacteria typically found on clothing, bedding,

and towels. There is no carryover of bacteria between loads after the cycle is complete.

Certified to Sanitize

Use this cycle to clean heavily soiled, colorfast fabrics. This cycle combines a super hot water

temperature and fast-speed tumbling to help ensure the removal of heavy soils and stains. It is

recommended that you set your hot water heater to 120°F (49°C) to ensure proper

performance during this cycle. Extra high speed spin helps shorten drying time. Only Sanitary

cycle has been designed to meet the requirements of NSF Protocol P172 for Sanitizing

Efficacy.

Power Wash

Use this cycle to wash small loads of heavily soiled work wear such as, overalls, coveralls,

sweatshirts, pants, and outdoor garments. This cycle combines warm water temperature,

optimal rinses, and a longer cycle time to help ensure the removal of all soil and stains from

your laundry.

Clean Washer with AFFRESH TM

Use this cycle once a month to keep the inside of your washer fresh and clean. This cycle uses

a higher water [eve[ in combination with AFFRESH TM washer cleaner or bleach and steam, to

thoroughly clean the inside of your washer. This cycle should not be interrupted. See

Cleaning Your Washer in the Washer Care section.

IMPORTANT: Do not place garments in the washer during the Clean Washer cycle.

Rinse & Spin

Use this cycle to get a rinse and spin only. This cycle combines fast-speed tumbling and extra

high speed spin. If desired, you can reduce the spin speed by selecting the speed you want

from the Spin Speed modifier.

A Rinse & Spin cycle is useful for:

• I.oads that need rinsing only, like swimsuits.

NOTE: For more delicate loads, when using a Rinse & Spin cycle to rinse swimwea_;

change the Speed Spin Modifier setting to Medium or Low to avoid fabric stress.

• Adding fabric softener to a load.

Drain & Spin

Use this cycle to drain your washer or to drain and spin your wash load. The spin speed is

preset to extra high. If desired, you can reduce the spin speed by selecting the speed you want

from the Spin Speed modifier.

NOTE: I.oads of synthetics, delicate fabrics, hand washables, and washable woolens should

be drained with no spin or low spin speed to avoid fabric stress.

Preset cycle settings

Each cycle has a preset Soil Level (cycle time), Water Temperature, and Spin Speed. The

preset settings provide the recommended fabric care for the selected cycle. See chart.

Cycles Soil Level Water Temp Spin Speed

(cycle time)

Whitest Whites Normal Hot/Cold Extra High

(1:20)

Heavy Duty Heavy Warm/Cold Extra High

(1:20)

Normal/Casual Normal Warm/Cold High

(0:50)

Delicate Normal Cold/Cold I.ow

(0:40)

Quick Wash I_ight Warm/Cold Extra High

(2-3 Items) (0:30)

Sanitary Normal Hot/Cold High

(1:50)

Power Wash Heavy Hot/Cold Extra High

(1:55)

Clean Washer N/A N/A N/A

with (1:05)

AFFRESH TM

Rinse & Spin N/A Cold/Cold Extra High

(0:20)

Drain & Spin N/A N/A Extra High

(0:11 )

To change the preset cycle settings

Press the selector of each setting until the desired setting illuminates.

Normal Washer Sounds

As with any new product, you will hear sounds that you are not accustomed to. You may hear

various sounds when the door is locked and unlocked, and during the washing, rinsing, and

spinning process. Between changes in wash actions, there will be momentary pauses. You

will hear water spraying and splashing during the wash and rinse cycles. These new sounds

and pauses are part of normal washer operation.

Z'I

You can customize your wash by adding options to your cycle selections. You can add or

change an option after starting a cycle anytime before the selected option begins. Not all

options are available with all cycles.

power*cance! normal

C.j_ casual

heavy/

duty/

whitest /

whites _

drain\

[ freshspin ] &spin\

rinse &spin

deiicate

uickwash

sanitary

power wash

lean washer

ith _,_]1

Joor locked

__ press pause to un!ock

start o pause

maxextract ]

signalon • off 1

options

See the "l.aundry Guide" for an overview of possible options for each Wash Cycle

selection.

You can select more than one option for a cycle. Some options cannot be added to some

cycles; for example, Soak Time cannot be added to the Quick Wash cycle.

If an option is available with a selected cycle, the light for that option will illuminate

when selected.

If an option is unavailable with a selected cycle, there will be a short tone, and the light

for that option will not illuminate when selected.

Signal On/Off

Use this option to turn the buzzer indicating the end of the cycle on or off.

Max Extract TM

Use this option to add an additional spinning time to any cycle to improve drying times for

heavy fabrics by reducing excess water, which may save energy.

Extra Rinse

A second rinse can be used to aid in the removal of detergent or bleach residue from

garments. This option provides an additional rinse with the same water temperature as the

normal rinse. This is the default rinse setting for the Whitest Whites cycle.

Fresh Spin (Fresh Hold)

NOTE: The panel shown above may be different from that of your model.

Use this option when you are not able to unload your clothes soon after the wash cycle ends.

This option provides periodic tumbling for up to 6 hours (Fresh Spin) or up to 10 hours (Fresh

Hold) to help freshen your clothes. During this time, the "l)one" indicator remains activated,

the door remains locked and the Fresh Spin (Fresh Hold) indicator light will flash. The Fresh

Spin (Fresh Hold) option will automatically stop and the door lock will be released after this

time expires, or if you press cancel at anytime to unload your laundry.

Preset cycle settings of Soil I.evel (cycle time), Wash Temperature, and Spin Speed can be

changed. You can change these settings by using modifiers. Modifiers can be changed before

or during the cycle until that part of the cycle starts. Not all modifiers are available with all

cycles and options.

i extra high

ATC hot _ high

heavy _ ATC warm rinse _ medium

ml normal _ ATC warm _ low

U li[_ht _ cold I no spin

l so,,,evo,] Iwa "temosP'ospeedI

modifiers

To change Soil I.evel (cycle time), select the SOIl. I.EVEI. button until the desired setting

illuminates.

To change the water temperature, select the WASH TEMP button until the desired setting

illuminates.

To change the spin speed, select the SPIN SPEEI) button until the desired setting

illuminates.

Water Temp

Select a water temperature based on the type of load you are washing. Use the warmest wash

water safe for fabrics. Follow garment label instructions.

Warm rinses leave the loads drier than cold rinses. Warm rinses increase wrinkling. In cold

climates, a warm rinse makes the load more comfortable to handle. Cold rinses save energy.

• In wash water temperatures colder than 60°F (15.6°C), detergents do not dissolve well.

Soils may be difficult to remove.

Wash Water Temperature Suggested Fabrics

HOT Sturdy colorfast fabrics

Whites and pastels

Heavy soils

WARM Bright colors

Moderate to light soils

COLD Colors that bleed or fade

I_ight soils

In wash water temperatures colder than 60°F (15.6°C), detergents do not disso/ve weft.

Soils may be difficult to remove.

Automatic Temperature Control

The automatic temperature control electronically senses and maintains a uniform water

temperature. Automatic temperature control regulates incoming hot and cold water.

Automatic temperature control is automatically turned On when a cycle is selected.

See "Preset Cycle Settings" in Cycles.

• Automatic temperature control works for all wash and rinse temperature settings.

CYCLE SUGGESTED LOAD TYPE AVAILABLE OPTIONS

Signal Delay Extra Fresh Spin Max

ON/OFF Start Rinse (Fresh Hold) Extract TM

Whitest Whites Heavily soiled white fabrics _/" _/" _/" _/" _/"

Heavy Duty Heavily soiled underwear, towels, work clothes, shirts, etc. _/" _/" _/" _/" _/"

Normal/Casual Normally soiled blouses, shirts, overalls, etc., made of polyester, nylon, _/" _/" _/" _/" _/"

linen, or cotton blends

Delicate Use this cycle to wash no-iron fabrics and garments labeled "Permanent _/" _/" _/" _/"

Press" or "Wrinkle Free" or that indicate using a "Gentle" cycle on the

care [abe[.

Quick Wash I_ight[y soiled sports wear made of cotton, polyester, nylon, or cotton _/" _/" _/" _/"

blends

Sanitary Heavily soiled underwear, towels, work clothes, and diapers. _/" _/" _/" _/" _/"

Power Wash Heavily soiled work wear-overalls, coveralls, sweatshirts, pants, and _/" _/" _/" _/" _/"

outdoor garments.

Clean Washer No clothes _/" _/"

with

AFFRESH TM

Rinse & Spin

Drain & Spin

Fabrics made of cotton, linen, polyester, or nylon _/" _/" _/"

LAUNDRY TIPS

Z'I

Preparing clothes for washing

Follow these recommendations to help you prolong the life of your garments.

• Use only High Efficiency detergents. The package for this type of detergent will be marked

"HE" or "High Efficiency." This wash system, along with less water, will create too much

sudsing with a regular non-HE detergent. Using regular detergent will likely result in

washer errors, longer cycle times, and reduced rinsing performance. It may also result in

component failures and noticeable mold or mildew. HE detergents are made to produce

the right amount of suds for the best performance. Follow the manufacturer's instructions

to determine the amount of detergent to use. Remember, concentrated detergents such as 2x

or higher will use less detergent based on load size.

Use only H__High Lfficiency detergent.

• Close zippers, snaps, and hooks to avoid snagging other items. Remove pins, buckles, and

other hard objects to avoid scratching the washer interior. Remove non-washable trim and

ornaments.

• Empty pockets and turn them inside out.

• Turn down cuffs; brush away lint and dirt.

• Turn wool and synthetic knits inside out to avoid pilling.

• Tie strings and sashes so they will not tangle.

• Mend tears, loose hems, and seams.

• Treat spots and stains.

• Stained or wet garments should be washed promptly for best results.

• Mix large and small items, avoid washing single items, and load evenly.

• Wash small items, such as infant socks, in a mesh garment bag. To create a balanced load,

it is recommended that more than one garment bag be used, and that each garment bag

be filled with equal amounts of material.

Sorting

• Separate heavily soiled items from lightly soiled ones, even if they would normally be

washed together. Separate lint-givers (towels, chenille) from lint-takers (corduroy,

synthetics, permanent press). When possible, turn lint-givers inside out.

• Separate dark colors from light colors, colorfast items from non colorfast items.

• Sort by fabric and construction (sturdy cottons, knits, delicate items).

Unloading

• Remove clothes from washer after the cycle is completed. Metal objects such as zippers,

snaps, and buckles may rust if left in the washer basket for a long time.

• When unloading garments, occasionally check under the gray colored seal at the front

of the tub for small items.

Loading suggestions

Heavy Work Clothes

4 jeans 2 sweatpants

4 work pants 2 sweatshirts

4 work shirts

Towels

10 bath towels

10 hand towels

14 washcloths

Mixed Load

3 sheets (1 king, 2 twin) 9 T-shirts

4 pillowcases 9 shorts

3 shirts 10 handkerchiefs

3 blouses

WASHER CARE

Cleaning the door seal

1. Open the washer door and remove any clothing or items from the washer.

2. Inspect the gray colored sea[ between the door opening and the basket for stained areas.

Pull back the sea[ to inspect areas under the sea[. Remove any foreign objects.

c) I.et stand 5 minutes.

d) Wipe down area thoroughly with a dry cloth and let the washer interior air dry

with door open.

IMPORTANT:

• Wear rubber gloves when cleaning for prolonged periods.

• Refer to the bleach manufacturer's instructions for proper use.

Washer Maintenance Procedure

This washer has a special cycle that uses higher water volumes and steam, in combination

with AFFRESH r_*washer cleaner or liquid chlorine bleach to thoroughly clean the inside

of the washer.

NOTES:

• Read these instructions completely before beginning the cleaning process.

If necessary, the cleaning cycle may be interrupted by pressing the Start/Pause button.

However; this will not immediately stop the cycle. The machine will display "int"

(interrupt) and continue with several rinse and drain steps to ensure that all remaining

bleach is rinsed from the washer.

A. Seal

If stained areas are found, wipe down these areas of the seal, using the procedure that

fol lows.

a) Mix a dilute solution, using s/_ cup (177 ml.) of liquid chlorine bleach, and 1 gal.

(3.8 I.) of warm tap water.

b) Wipe the seal area with the dilute solution, using a damp cloth.

Begin procedure

1. Open the washer door and remove any clothing or items from the washer.

2. Using the AEERESHTM washer cleaner (Recommended):

Add one AFFRESH rMwasher cleaner tablet to the washer drum.

2 0

La page charge ...

Maytag MHWE450WR00 Manuel utilisateur

Marque: Maytag

Modèle: MHWE450WR00

Catégorie: Machines à laver

Taper: Manuel utilisateur

Télécharger le PDF

rapport

dans d''autres langues

English: Maytag MHWE450WR00 User manual

Maytag MHWE450WR00 Manuel utilisateur

Maytag MHWE450WR00 Manuel utilisateur

dans d''autres langues

Documents connexes

Autres documents