Philips AC4080/10 Manuel utilisateur

Catégorie
Humidificateurs
Taper
Manuel utilisateur
2
A
B
C
D
E
1
Винаги сме насреща, за да помогнем
Регистрирайте продукта си и получете помощ на
www.philips.com/welcome
Спецификациите подлежат на промяна без предупреждение
© 2015 Koninklijke Philips N.V.
Всички права запазени.
EN User manual 1
DE Benutzerhandbuch 19
BG Ръководство за употреба 39
FR Mode d’emploi 57
IT Manuale utente 75
NL Gebruiksaanwijzing 95
4241 210 83841
AC4080
ВЪПРОСИ?
СВЪРЖЕТЕ СЕ С
Philips
ВЪПРОСИ?
СВЪРЖЕТЕ СЕ С
Philips
2
1
2 3
2
4 5
2
6
2
2
1
7
2
1
8
14
3”
20
26 27 28 29
30 31 32
2
1
33
34 35 36
Съотношение
вода:оцет
1:1
1 час
37
38 39
3”
4021
22 24 2523
15 16 17
2”
18 19
9
10 11 12 13
ÏÐÅ×ÈÑÒÂÀÍÅ ÎÂËÀÆÍßÂÀÍÅ
ÏÚËÍÈÒÅË
ÏÎ×ÈÑÒÅÒÅ ÑÌÅÍÅÒÅ
ÏÚËÍÈÒÅË
ÏÎ×ÈÑÒÅÒÅ ÑÌÅÍÅÒÅ
ÏÚËÍÈÒÅË
ÏÎ×ÈÑÒÅÒÅ ÑÌÅÍÅÒÅ
ÏÚËÍÈÒÅË
ÏÎ×ÈÑÒÅÒÅ ÑÌÅÍÅÒÅ
ÏÚËÍÈÒÅË
ÏÎ×ÈÑÒÅÒÅ ÑÌÅÍÅÒÅ
ÏÐÅ×ÈÑÒÂÀÍÅ ÎÂËÀÆÍßÂÀÍÅ ÏÐÅ×ÈÑÒÂÀÍÅ ÎÂËÀÆÍßÂÀÍÅ
1
EN
English
Contents
1 Important 2
Safety 2
2 Your combi air purier and
humidier 5
Overview 5
3 Getting started 6
Install lters 6
Prepare for humidication 6
4 Using the appliance 7
Understand the air quality
light 7
Switch on and o the
appliance 7
Change the working mode 7
Change the fan speed 8
Set the timer 9
Set the humidity level 9
Water level 10
5 Cleaning 10
Cleaning schedule 10
Clean the body of the
appliance 11
Clean the air quality sensor 11
Clean the water tank and
humidication lter 11
Clean the pre-lter and
descale the humidication
lter 12
6 Replacing the lters 13
Understand the healthy air
protect lock 13
Replace lter 2 13
Replace the humidication
lter 13
7 Resetting the lter lifetime
counter 14
8 Troubleshooting 15
9 Guarantee and service 17
Order parts or accessories 17
10 Notices 17
Electromagnetic elds (EMF) 17
Recycling 18
2
EN
1 Important
Safety
Read this user manual
carefully before you use the
appliance, and save it for
future reference.
Danger
Do not let water or any
other liquid or flammable
detergent enter the
appliance to avoid electric
shock and/or a fire
hazard.
Do not clean the
appliance with water,
any other liquid, or a
(flammable) detergent to
avoid electric shock and/
or a fire hazard.
Do not spray any
flammable materials
such as insecticides or
fragrance around the
appliance.
The water in the water
tank is not suitable for
drinking. Do not drink this
water and do not use it to
feed animals or to water
plants. When you empty
the water tank, pour the
water down the drain.
Warning
Check if the voltage
indicated on the bottom
indicated at the rear of the
appliance corresponds to
the local power voltage
before you connect the
appliance.
If the power cord is
damaged, you must have
it replaced by Philips, a
service center authorized
by Philips, or similarly
qualified persons in order
to avoid a hazard.
Do not use the appliance
if the plug, the power
cord, or the appliance
itself is damaged.
This appliance can be
used by children aged
from 8 years and above
and persons with reduced
physical, sensory or
mental capabilities or
lack of experiences and
knowledge if they have
been given supervision or
instruction concerning use
of the appliance in a safe
way and understand the
hazards involved. Children
3
EN
English
shall not play with the
appliance. Cleaning and
user maintenance shall
not be made by children
without supervision.
Do not block the air inlet
and outlet, e.g. by placing
items on the air outlet or
in front of the air inlet.
Caution
This appliance is not
a substitute for proper
ventilation, regular
vacuum cleaning, or use
of an extractor hood or
fan while cooking.
If the power socket used
to power the appliance
has poor connections,
the plug of the appliance
becomes hot. Make
sure that you plug the
appliance into a properly
connected power socket.
Always place and use the
appliance on a dry, stable,
level, and horizontal
surface.
Leave at least 20cm free
space behind and on both
sides of the appliance
and leave at least 30cm
free space above the
appliance.
Do not place anything
on top of the appliance
and do not sit on the
appliance.
Do not place the
appliance directly below
an air conditioner to
prevent condensation
from dripping onto the
appliance.
Make sure all filters
are properly installed
before you switch on the
appliance.
Only use the original
Philips filters specially
intended for this
appliance. Do not use any
other filters.
Avoid knocking against
the appliance (the air inlet
and outlet in particular)
with hard objects.
Always lift or move
the appliance by both
handles at the sides of the
appliance.
Do not insert your fingers
or objects into the air
outlet or the air inlet to
prevent physical injury
or malfunctioning of the
appliance.
4
EN
Do not use this appliance
when you have used
indoor smoke-type insect
repellents or in places
with oily residues, burning
incense, or chemical
fumes.
Do not use the appliance
near gas appliances,
heating devices or
fireplaces.
Always unplug the
appliance after use
and before filling water,
cleaning, or carrying out
other maintenance.
Do not use the appliance
in a room with major
temperature changes,
as this may cause
condensation inside the
appliance.
To prevent interference,
place the appliance
at least 2m away from
electrical appliances that
use airborne radio waves
such as TVs, radios, and
radio-controlled clocks.
When the appliance is
not used for a long time,
bacteria may grow on the
filters. Check the filters
after a long period of
disuse. If the filters are
very dirty, replace them
(see the chapter ‘Replace
the filters’).
The appliance is only
intended for household
use under normal
operating conditions.
Do not use the appliance
in wet surroundings or in
surroundings with high
ambient temperatures,
such as the bathroom,
toilet, or kitchen.
The appliance does
not remove carbon
monoxide (CO) or
radon (Rn). It cannot be
used a safety device in
case of accidents with
combustion processes
and hazardous chemicals.
Clean the water tank
every day to keep it clean.
Only fill the water tank
with cold tap water. Do
not use ground water or
hot water.
Do not put any substance
other than water in the
water tank. Do not put
fragrance in the water
tank.
5
EN
English
If you do not use the
humidification function
for a long time, clean
the water tank and
humidification filter tray.
Dry the humidification
filter.
If you need to move the
appliance, disconnect the
appliance from the power
supply first. Then empty
the water tank. Carry the
appliance horizontally by
both handles on the sides
of the appliance.
2 Your combi air
purifier and
humidifier
Congratulations on your purchase, and
welcome to Philips!
To fully benefit from the support that
Philips offers, register your product at
www.philips.com/welcome.
Philips VitaShield IPS technology and
NanoCloud technology ensures you
"Healthy air always".
VitaShield IPS technology effectively
remove pollutants (ultrafine particles,
allergens, bacteria and viruses) with size
>0.02 micron including bacteria and
virus*.
NanoCloud technology, using a
special humidification filter adds H2O
molecules to the dry air, and produces
healthy humid air without formation
of water mist. Its humidification filter
retains bacteria, calcium and other
particles from the water.
*According to 2008 Microbiological
Risk Assessment Report of the World
Health Organization (WHO), the avian
influenza, human influenza viruses,
Legionella, Hepatitus viruses and SARS
coronavirus are larger than 0.02 micron.
Read this user manual carefully before
you use the appliance, and save it for
future reference.
Overview
A Air quality sensor
B Filter 1: Pre-filter
C Filter 2: 2-in-1 HEPA & Active
Carbon filter AC4158
D Water tank
E Filter 3: Humidification filter AC4155
6
EN
3 Getting started
Install filters
The appliance comes with all
filters fitted inside. Remove the
packaging of the filters before you
can use the appliance. Remove
all filters, unpack them, and place
them back into the appliance
described as follows:
Tip
When you remove or insert filters, place
the appliance against a wall for more
stability.
Note
Insert the filters in the correct position.
Make sure that you place filter 2 in the
appliance first and then the pre-filter.
Make sure that the side with the tag is
pointing towards you.
1 Unlock the bottom of the front
panel from the appliance, then
gently pull the top part of the front
panel towards you (fig b).
2 To remove the pre-filter, press the
two clips down and pull the filter
towards you (fig c).
3 Remove filter 2 from the appliance
(fig d).
4 Remove the packaging materials of
filter 2 (fig e).
5 Put the unpacked filter 2 back into
the appliance (fig f).
6 Put the pre-filter back into the
appliance (fig g).
Note
Make sure that the side with the two
clips is pointing towards you, and that
all hooks of the pre-filter are properly
attached to the purifier.
7 To reattach the front panel, mount
the panel onto the top of the
appliance first (1). Then, gently
place the panel against the body of
the appliance (2) (fig h).
Prepare for
humidification
1
Remove all packaging materials of
the humidification filter (fig i).
2 Pull out the water tank from the
side of the appliance (fig j).
3 Put the humidification filter into the
water tank (fig k).
4 Remove the lid of the water filling
hole (fig l).
5 Fill the water tank with cold tap
water (fig m).
Note
When pouring water into the water tank,
make sure not to exceed the MAX water
level indication.
6 After the water is filled, put the lid
back onto the water filling hole
(fig n).
7 Push the water tank back into the
appliance (fig o).
7
EN
English
4 Using the
appliance
Understand the air
quality light
Color of the air
quality light
Air quality level
Blue Good
Purple Fair
Red Bad
The air quality light automatically
goes on when the appliance is
switched on, and shows all colors
repeatedly. In a short while the air
quality light selects the color that
corresponds to the ambient air
quality.
Note
The built-in air quality sensor measures
the air quality and automatically selects
the appropriate color of the air quality
light. When the air is clean, the color of
the air quality light is in blue. When the
air quality deteriorates, the color of the
air quality light changes to purple or red.
Switch on and off the
appliance
The appliance operates under
air purification combined with
humidification by default.
1 Put the plug into the wall socket.
» All lights go on once and then go
out again.
2 Press to switch on the appliance
(fig p).
» The PURIFY and HUMIDIFY lights
are on.
» After measuring the air quality
for a short while, the air quality
sensor automatically selects
the appropriate color of the air
quality light.
» The appliance enters AUTO mode,
and the target humidity level is
50% by default (fig q).
3 Press for 2 seconds to switch off
the appliance (fig r).
Note
After the appliance is switched off by
the on/off button , if the plug is still
in the power socket, the appliance
will resume working based on the
last settings when it is switched on
again.
Change the working
mode
Besides operating under air purification
combined with humidification, the
appliance can also work under air
purification only mode.
1 After the appliance is switched on,
press
once.
» The HUMIDIFY and humidity
level indicators go out.
» The humidification function is
deactivated. The appliance works
under air purification only mode
(fig s).
2 Press again to activate the
humidification function.
8
EN
Note
In air purification only mode, the
humidity button does not respond.
The appliance cannot work under
humidification only mode.
Set the sensitivity of the air
quality sensor
This appliance allows you to adjust
the sensitivity of the air quality sensor.
There are three sensitivity levels:
Extra sensitive (default setting)
Sensitive
Standard
You can adjust the sensitivity of the air
quality sensor in the following way:
Note
When the appliance is set to a higher
sensitivity, the purifier becomes more
allergic to the pollutants in the air. When
the purifier is in AUTO mode, it is more
likely to choose a higher fan speed
than the standard mode. The air quality
sensor selects the appropriate color of
the air quality light in accordance with
the higher sensitivity.
1 Unplug the appliance.
2 After a short while, put the plug in
the wall socket again.
3 Press and hold the fan speed
button
and humidity button
simultaneously for 3 seconds
(fig t).
» One or more fan speed lights
flash to show the current
sensitivity level of the air quality
sensor.
Fan speed light Sensitivity level
Extra sensitive
Sensitive
+ Standard
4 Press the fan speed button to
adjust the sensitivity level of the air
quality sensor (fig u).
5 Press and hold for 2 seconds to
save the setting and switch off the
appliance.
Note
When you are changing the sensitivity
level, if you do not change any settings,
or if you do not press for 2 seconds
after you have changed any settings, the
appliance will resume normal work without
saving any changes.
After the sensitivity is changed and
saved, the appliance automatically starts
operating at the preset sensitivity level
whenever you switch on the appliance.
Change the fan speed
AUTO
In AUTO mode, the appliance
selects the appropriate fan speed in
accordance with the ambient air quality.
Press the fan speed button
to
select AUTO mode (fig v).
AUTO and one of the fan speed
indicators (
or ) light up.
Note
In AUTO mode, when the air quality
reaches the target (air purification only
mode), or when the air quality and
humidity reach the target simultaneously
(combi mode), the appliance will work
with a lower fan speed, and the fan
speed indicator ( or ) goes out.
9
EN
English
Manual
You can mannually select the desired
fan speed.
Press the fan speed button
once
or more times to select the desired
fan speed (
or ) (fig u).
Note
In Manual mode, when the air quality
reaches the target (air purification only
mode), or when the air quality and
humidity reach the target simultaneously
(combi mode), the appliance will
continue to work with the selected fan
speed.
Tip
If the air quality light is in blue, this
means the air quality is good, and you
can select a lower fan speed. On the
other hand, if the air quality light turns
red or purple, this means the air quality
is bad or fair. You can select a higher fan
speed to clean the air quickly.
Sleep mode
In sleep mode, the appliance operates
very quietly.
Press the fan speed button
to
select the sleep mode (fig w).
» The sleep indicator lights up.
To change to another fan speed, press
the fan speed button
.
Note
When the appliance switches to sleep
mode, the indicators goes out after
1 minute, and the appliance keeps
working.
Set the timer
With the timer function, you can let the
appliance operate for a set number of
hours. When the set time has elapsed,
the appliance automatically switches
off.
1 Press the timer button to activate
the timer (fig x).
» The timer light ( , or ) goes
on.
2 Press the timer button repeatedly
to choose the number of hours you
want the appliance to operate. The
corresponding timer light goes on.
To deactivate the timer function, press
the timer button
repeatedly until the
timer light (
, or ) goes out.
Set the humidity level
Note
Make sure that the water tank is filled
with water when you want to use
the humidification function (refer to
the chapter "Getting started", section
"Prepare for humidification").
Press the humidity button once
or more times to set the desired
air humidity to 40%, 50% or 60%
(fig y).
» The corresponding humidity light
(40%, 50% or 60%) starts to flash.
» When the appliance reaches
the target humidity level, the
humidity level indicator remains
on.
Note
If you want to increase the humidity
level in shorter time, you can select a
higher fan speed.
10
EN
5 Cleaning
Note
Always unplug the appliance before you
clean it.
Never immerse the appliance in water or
any other liquid.
Never use abrasive, aggressive, or
flammable cleaning agents such as
bleach or alcohol to clean any part of
the appliance.
Only the pre-filter and humidification
filter are washable. The air purifier filter is
not washable nor vacuum cleanable.
Cleaning schedule
Frequency Cleaning method
When
necessary
Wipe the surface of the
appliance with a soft dry
cloth.
Every week Rinse the humidification
filter.
Rinse the water tank.
When the
filter replace
indicator
/
lights up
Clean the pre-filter.
Descale the
humidification filter
with the vinegar-water
mixture.
Every two
months
Clean the air quality
sensor and air humidity
sensor with a dry cotton
swab.
Water level
The water level in the water tank is
visible through the water level window
on the side of the appliance (fig z).
When there is not enough water in the
water tank,
flashes to indicate that
you have to refill the water tank (fig {).
Note
When there is no water in the water tank,
the refill water light remains on, and
the humidification indicator flashes to
remind users the humidification function
is not working. When the water tank is
refilled with water, the humidification
function will be resumed.
The refill water light does not light up
under air purification only mode.
11
EN
English
Clean the body of the
appliance
Regularly clean the inside and outside
of the appliance to prevent dust from
collecting.
1 Wipe away dust with a soft dry cloth
from the body of the appliance.
2 Clean the air inlet and the air outlet
with a soft dry cloth.
Clean the air quality
sensor
Clean the air quality sensor every two
months for optimal functioning of the
appliance. Clean it more frequently
if you use the appliance in a dusty
environment.
Note
When the humidity level in the
room is very high, it is possible that
condensation develops on the air
quality sensor. As a result, the air quality
light may indicate that the air quality is
bad even though the air quality is good.
In this case you have to clean the air
quality sensor or use one of the manual
speed settings.
1 Clean the inlet and outlet of the
air quality sensor with a soft brush
(fig |).
2 Remove the cover of the air quality
sensor (fig }).
3 Clean the sensor, the dust inlet
and the dust outlet with a lightly
moistened cotton swab (fig ~).
4 Dry them with a dry cotton swab.
5 Reattach the sensor cover.
Clean the water tank and
humidification filter
Clean the water tank and humidification
filter every week to keep them hygienic.
1 Pull the water tank from the side of
the appliance (fig j).
2 Remove the humidification filter
from the water tank (fig ).
3 Rinse the humidification filter under
a running tap (fig ).
Note
Do not scrub the humidification filter,
nor place it under direct sunlight.
4 Unfasten the locks on the edge of
the water tank lid, and remove it
from the water tank (fig ).
5 Rinse the water tank under a
running tap (fig ).
Note
If necessary, use a mild detergent to
clean the water tank. In this case, rinse
the water tank thoroughly.
6 Dry the water tank and its lid with a
soft, dry cloth.
7 Put the lid back onto the water tank
and fasten the locks.
8 Put the humidification filter back
into the water tank (fig k).
9 Put the water tank back into the
appliance (fig o).
12
EN
Clean the pre-filter
and descale the
humidification filter
Filter alert light
status
Follow this
Filter light
/ goes
on
Clean the
pre-filter and
descale the
humidification
filter
Note
Only the pre-filter and humidification
filter are washable. Filter 2 is not
washable.
Filter light / goes on approximately
once every month (fig ƒ).
1 Wash the pre-filter under a running
tap. If the pre-filter is very dirty, use
a soft brush to brush away the dust
(fig ).
2 Air dry the pre-filter.
Note
Make sure that the pre-filter is
completely dry. If it is still wet, bacteria
may multiply in it and shorten the
lifetime of the pre-filter.
3 Mix the white vinegar with an equal
amount of tap water in a container
that is large enough to soak the
humidification filter in.
Note
White vinegar has 5% acetic acid.
If there are white deposits (limescale) on
the filter, make sure that the side with
the white deposits is immersed in the
water.
4 Let the humidification filter soak in
the solution for one hour (fig ).
5 Discard the water-vinegar solution.
6 Rinse the humidification filter
under the tap to rinse away vinegar
residues. During rinsing, turn the
humidification filter so that both
the front and back sides are rinsed
(fig ).
7 Let excess water drip off the
humidification filter and let it air dry.
8 After the pre-filter and
humidification filter are put back
in the appliance, reset the filter
lifetime counter. (Refer to chapter
7 "Resetting the filter lifetime
counter")
13
EN
English
6 Replacing the
filters
Understand the healthy
air protect lock
This appliance is equipped with the
healthy air protect lock to make sure
that the filters are in optimal condition
when the appliance is operating. When
the filter is almost full and has to be
replaced, the specific filter light (
/ )
start to flash.
When you do not replace the filter in
time:
» The appliance stops operating
and it is locked.
» The specific filter light (
/ )
illuminate continuously.
Note
The appliance is locked after the filter
light has flashed for approximately 2
weeks.
Replace filter 2
Note
Filter 2 is not
washable nor vacuum
cleanable.
Replace filter 2 when the filter light
starts flashing (fig ).
1 Remove the filters using the tag on
the filter. Take the filters by both
sides and gently deposit them into
the house hold trash bin (fig d).
Note
Do not touch the pleated filter surface,
or smell the filter as it has collected
pollutants from the air.
Wash your hands after disposing of the
used filters.
2 Remove all packaging material from
the new filter 2 (fig e).
3 Put the new filter 2 into the
appliance (fig f).
4 After the pre-filter is put back in
the appliance, reset the filter 2
lifetime counter. (Refer to chapter
7 "Resetting the filter lifetime
counter")
Replace the
humidification filter
Replace the humidification filter when
filter light
starts flashing (fig ).
1 Remove the used humidification
filter from the water tank (fig ).
2 Remove all packaging material of
the new humidification filter (fig i).
3 Put the new humidification filter in
the water tank (fig k).
4 Push the water tank back into the
appliance (fig o).
5 Reset the humidification filter
lifetime counter. (Refer to chapter 7
"Resetting the filter lifetime
counter")
14
EN
7 Resetting the
filter lifetime
counter
When you replace the filters, it is
important that you also reset the filter
lifetime counter afterwards. This allows
the appliance to be in sync with the
filter lifetime.
1 Press and hold the reset button
for 3 seconds, the filter light goes
out, and the appliance resumes
work automatically in the default
settings (combi mode with AUTO as
the fan speed) (fig ˆ).
15
EN
English
8 Troubleshooting
This chapter summarizes the most common problems you could encounter with the
appliance. If you are unable to solve the problem with the information below, contact
the Consumer Care Center in your country.
Problem Possible solution
The appliance
does not work
even though it is
plugged in.
The filter replacement light has been on continuously but
you did not replace the corresponding filter, it is now locked.
In this case, replace the filter and reset the filter time.
The water refill light
flashes. Make sure the water tank is
properly installed.
The appliance
does not work
even though it is
switched on.
When the filters are full but not replaced yet, the appliance
stops operating and will be locked. Replace the filters and
reset the filter lifetime counter.
The water tank
leaks.
It is normal that the lid of the water tank is slightly wet when
you remove it from the appliance. However, if water drops
keep dripping from the bottom of the water tank, contact the
Consumer Care Center in your country.
There are some
white deposits on
the humidification
filter.
The white deposits are called limescale and they consist of
minerals from the water. Limescale on the humidification filter
affects the humidifying performance. Therefore you have
to descale the humidification filter when the filter light
/
flashes (See the chapter "Clean the pre-filter and descale the
humidification filter").
No air comes out of
the air outlet.
Plug the appliance into the power supply and switch on.
The airflow that
comes out of
the air outlet is
significantly weaker
than before.
The pre-filter is dirty. Clean the pre-filter (see the chapter
"Clean the pre-filter and descale the humidification filter").
Make sure that you have removed all packaging material
from the filters.
16
EN
Problem Possible solution
The air quality
does not improve,
even though the
appliance has been
operating for a long
time.
One of the filters has not been placed in the appliance.
Make sure that all filters are properly installed in the
following order, starting with the innermost filter: 1) filter 2; 2)
pre-filter.
The air quality sensor is wet. The humidity level in your room
is high and causes condensation. Make sure that the air
quality sensor is clean and dry (see the chapter "Clean the
air quality sensor").
The color of the air
quality light always
stays the same.
The air quality sensor is dirty. Clean the air quality sensor
(see the chapter "Clean the air quality sensor").
There is not enough ventilation in the room. Open a window,
to improve the air circulation.
I do not see water
vapor coming out
of the appliance. Is
it working?
When water vapor is very fine, it is invisible. With the
NanoCloud humidification technology, the appliance produces
healthy humid air from the outlet area without formation of
water mist.
The appliance
produces a strange
smell.
The first few times you use the appliance, it may produce
a plastic smell. This is normal. However, if the appliance
produces a burnt smell, contact your Philips dealer or an
authorized Philips service centre. The appliance may also
produce an unpleasant smell when one of the filters is dirty. In
this case, clean or replace the filter concerned.
I need cleaner air
because I have an
allergy.
You can change the air quality sensor sensitivity (see the
chapter "Use the appliance, section "Set the sensitivity of the
air quality sensor") to make the appliance clean the air even
better.
The appliance is
extra loud.
Please check if you have removed all the packaging material
from the filters.
If the appliance is still too loud, you can change the fan
speed to a lower fan speed level.
The appliance still
indicates that I
need to replace a
filter, but I already
did.
Perhaps you did not press the reset button
properly. Plug in
the appliance, press the
button to switch on and press and
hold the reset button
for 3 seconds.
17
EN
English
9 Guarantee and
service
If you need information or if you have a
problem, please visit the Philips website
at www.philips.com or contact the
Philips Consumer Care Center in your
country (you find its phone number
in the worldwide guarantee leaflet). If
there is no Consumer Care Centre in
your country, go to your local Philips
dealer.
Order parts or
accessories
If you have to replace a part or want to
purchase an additional part, go to your
Philips dealer or visit www.philips.com/
support.
If you have problems obtaining the
parts, please contact the Philips
Consumer Care Center in your country
(you can find its phone number in the
worldwide guarantee leaflet).
10 Notices
Electromagnetic fields
(EMF)
This Philips appliance complies with all
applicable standards and regulations
regarding exposure to electromagnetic
fields.
Compliance with EMF
Koninklijke Philips N.V. manufactures
and sells many products targeted at
consumers, which, like any electronic
apparatus, in general have the ability
to emit and receive electromagnetic
signals.
One of Philips' leading Business
Principles is to take all necessary health
and safety measures for our products,
to comply with all applicable legal
requirements and to stay well within the
EMF standards applicable at the time of
producing the products.
Philips is committed to develop,
produce and market products that
cause no adverse health effects. Philips
confirms that if its products are handled
properly for their intended use, they
are safe to use according to scientific
evidence available today.
Philips plays an active role in the
development of international EMF
and safety standards, enabling Philips
to anticipate further developments in
standardization for early integration in
its products.
18
EN
Recycling
This symbol means that this product
shall not be disposed of with normal
household waste (2012/19/EU).
Follow your country’s rules for the
separate collection of electrical and
electronic products. Correct disposal
helps prevent negative consequences
for the environment and human health.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72
  • Page 73 73
  • Page 74 74
  • Page 75 75
  • Page 76 76
  • Page 77 77
  • Page 78 78
  • Page 79 79
  • Page 80 80
  • Page 81 81
  • Page 82 82
  • Page 83 83
  • Page 84 84
  • Page 85 85
  • Page 86 86
  • Page 87 87
  • Page 88 88
  • Page 89 89
  • Page 90 90
  • Page 91 91
  • Page 92 92
  • Page 93 93
  • Page 94 94
  • Page 95 95
  • Page 96 96
  • Page 97 97
  • Page 98 98
  • Page 99 99
  • Page 100 100
  • Page 101 101
  • Page 102 102
  • Page 103 103
  • Page 104 104
  • Page 105 105
  • Page 106 106
  • Page 107 107
  • Page 108 108
  • Page 109 109
  • Page 110 110
  • Page 111 111
  • Page 112 112
  • Page 113 113
  • Page 114 114

Philips AC4080/10 Manuel utilisateur

Catégorie
Humidificateurs
Taper
Manuel utilisateur