Matrox orion HD Installation And Hardware Manual

Matrox Orion HD

Installation and Hardware Reference

Manual no. Y11184-101-0101

July 26, 2012

Matrox® is a registered trademark of Matrox Electronic Systems Ltd.

Microsoft® and Windows®, are registered trademarks of Microsoft Corporation.

PCI-X® and PCI Express® are registered trademarks of PCI-SIG. In addition, PCIe is

a trademark of PCI-SIG.

VNC® is a registered trademark of RealVNC Ltd. in the U.S. and other countries.

All other nationally and internationally recognized trademarks and tradenames

are hereby acknowledged.

Patent Notice

This product may be protected by one or more patents. See

www.matrox.com/patents

.

Limitation of Liabilities: In no event will Matrox or its suppliers be liable for any

indirect, special, incidental, economic, cover or consequential damages arising

out of the use of or inability to use the product, user documentation or related

technical support, including without limitation, damages or costs relating to the

loss of profits, business, goodwill, even if advised of the possibility of such

damages. In no event will Matrox and its suppliers’ liability exceed the amount

paid by you, for the product.

Because some jurisdictions do not allow the exclusion or limitation of liability for

consequential or incidental damages, the above limitation may not apply to

you.

Disclaimer: Matrox Electronic Systems Ltd. reserves the right to make changes in

specifications at any time and without notice. The information provided by this

document is believed to be accurate and reliable. However, neither Matrox

Electronic Systems Ltd. nor its suppliers assume any responsibility for its use; or for

any infringements of patents or other rights of third parties resulting from its use.

No license is granted under any patents or patent right of Matrox Electronic

Systems Ltd.

PRINTED IN CANADA

Contents

Chapter 1: Introduction. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Matrox Orion HD board . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

General acquisition features. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Display features. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Memory . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Communication with DIP switches and LEDs . . . . . . . . . . . . . . . . . . . . . . . 11

Data transfer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Limitations of Matrox Orion HD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Essentials to get started . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

Inspecting the Matrox Orion HD package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Standard items . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Available separately . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

Handling components. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

Chapter 2: Hardware installation . . . . . . . . . . . . . . . . . . . . . . . . . 19

Installing your Matrox Orion HD board . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

Connecting external devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

Matrox Orion HD bracket interface connectors . . . . . . . . . . . . . . . . . . . . . . 23

Connecting SDI digital display devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

Connecting DVI-D and RGB display devices . . . . . . . . . . . . . . . . . . . . . . . . 25

Connecting SDI digital video sources . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

Connecting video sources of other supported formats . . . . . . . . . . . . . . . . . . 28

Chapter 3: Using multiple Matrox Orion HD boards. . . . . . . . . . 31

Installation of multiple boards . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32

Simultaneous image capture from different boards . . . . . . . . . . . . . . . . . . . . . . . . . . 33

Appendix A: Glossary. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35

Glossary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36

Appendix B: Technical information. . . . . . . . . . . . . . . . . . . . . . . . 43

Board summary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44

Global information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44

Technical features of Matrox Orion HD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45

Electrical specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47

Dimensions and environmental specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47

DIP switches and LEDs on Matrox Orion HD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48

Connectors on Matrox Orion HD boards . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50

SDI video output connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51

SDI video input connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52

Multi-format input/output connector and the Matrox KX20 to 4 DVI-I

cable adapter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53

Appendix C: Listing of Matrox Orion HD boards. . . . . . . . . . . . . 57

Key feature changes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58

Index

Regulatory Compliance

FCC Compliance Statement

Industry Canada Compliance Statement

EU Notice (European Union)

Directive on Waste Electrical and Electronic Equipment (WEEE)

Product support

Limited Warranty

Chapter

1

Chapter 1: Introduction

This chapter briefly describes the features of the Matrox

Orion HD board, as well as the software that can be used

with the board.

8 Chapter 1: Introduction

Matrox Orion HD board

Matrox Orion HD is a high-performance graphics adapter (display board) with

video capture capabilities. Both in display and acquisition, the board supports

standard definition (SD) and high-definition (HD) analog or digital video.

Multi-format

Video

Decoder

DVI-I* connector

Multi-format

Video

Decoder

DVI-D

B/Pb /CVBS1

/C

R/Pr/CVBS2

H-SYNC

Multi-rate

Deserializer

Multi-rate

Deserializer

Matrox

GPU

Host x16 PCIe

Matrox Orion HD

* Connected via KX20 to four DVI-I cable adapter.

DVI-D

SDI

G/Y/CVBS0

V-SYNC

H-SYNC

V-SYNC

Input

Selector

Input

Selector

Multi-rate

Serializer

Transmitter

Multi-rate

Serializer

Transmitter

SDI

DVI-D

R

G

B

H-SYNC

V-SYNC

H-SYNC

B

G

R

DVI-D

DVI-I* connector

Shared Memory

(DDR2 SDRAM)

1GB

** Connected via SMB to BNC cable adapter.

BNC connector**

G/Y/CVBS0

B/Pb /CVBS1/C

R/Pr/CVBS2

Matrox Orion HD board 9

General acquisition features

Matrox Orion HD has four acquisition paths, but can grab from only two

independently at any one time. Two of the acquisition paths support SD or HD

3G-SDI digital video input using a multi-rate deserializer. The other two

acquisition paths support multiple video input formats using a multi-format video

decoder; they support RGB, YPbPr, Y/C, or CVBS analog video input or DVI-D

digital video input. The table below summarizes the supported aquisition video

formats:

The two acquisition paths that support multiple video input formats also support

video input from display boards (graphics adapters) in standard resolutions. The

table below summarizes the supported standard resolutions:

When grabbing standard definition (SD) video, the multi-format video decoder

converts the video input into RGB888, YUV16, or YCbCr601; when grabbing

high-definition (HD) video, it converts the video input to RGB888, YUV16, or

YCbCr709. The multi-format video decoder includes a programmable color space

converter for converting grabbed images to a different format.

10 Chapter 1: Introduction

When grabbing video in SDI format, the data does not get converted. Standard

definition (SD) video input is in YCbCr601; high-definition (HD) video input

is in YCbCr709.

Display features

Matrox Orion HD can output video (the operating system’s desktop) to four

independent display devices simultaneously. These devices can be either digital

(DVI-D or SDI) or analog output devices, depending on the connector to which

they are connected. The video outputs are not only independent from each other,

but are also independent from the video inputs for maximum configuration

flexibility. The video outputs can be used to display an extended Windows desktop

or the Windows desktop and an exclusive display. However, to grab with the

Matrox Orion HD board, one of the board’s outputs must be used to display the

Windows desktop; otherwise, the Matrox GPU won’t be initialized properly and

won’t be available to control the grab. The table below summarizes the supported

standard display resolutions:

Two of the video outputs can be output in SDI format using a multi-rate serializer.

The other two video outputs can be output in RGB analog format or in DVI-D

format using a multi-format transmitter.

Limitations of Matrox Orion HD 11

Memory

As a standard feature, Matrox Orion HD has 1 Gbyte of linearly addressable

DDR2 SDRAM, used as acquisition and display memory, with a bandwidth of

up to 500 MHz, and a 64-bit data bus. This memory is mainly used by the GPU

for video display. Some of the memory is also used for video acquisition.

Communication with DIP switches and LEDs

Matrox Orion HD has a user input/output register, whereby each bit corresponds

to a DIP switch or a light-emitting diode (LED) on-board. Instead of having

user-defined output signals generated from the output bits of the register, or

user-defined input signals setting the input bits of the register, Matrox Orion HD

has LEDs and DIP switches, respectively. Setting a DIP switch enables an input

bit of the register; enabling an output bit with the MIL library (described later)

turns on a LED.

You can use these DIP switches and LEDs to communicate with the operator of

the camera setup. Two common uses for the DIP switches and LEDs are:

identifying Matrox Orion HD boards when multiple boards are installed in the

computer, and indicating when an error has occurred in a MIL application (with

a LED).

Data transfer

A x16 PCIe Host interface provides Matrox Orion HD with the throughput

necessary to handle the transfer of two high-definition video streams to Host

memory. Matrox Orion HD’s Host interface provides a total peak bandwidth of

up to 4.5 Gbytes/sec (that is, 2.5 Gbytes/sec on-board memory to Host and

2.0 Gbytes/sec Host to on-board memory), preventing video data from

inadvertently being discarded. In addition, the point-to-point connectivity of

PCIe stops other add-in devices from consuming valuable bandwidth between the

board and the Host computer.

Limitations of Matrox Orion HD

Certain limitations exist that affect the performance of your Matrox Orion HD

board. It is important to be aware of these limitations to optimize the performance

of your Matrox Orion HD board.

First, you must install the Matrox Orion HD board in your computer before

installing the software.

12 Chapter 1: Introduction

Second, all functionality on the Matrox Orion HD board is controlled by a

Matrox-designed GPU and uses MIL GPU services. For the Matrox Orion HD

board to work, the GPU must drive the output of the Windows desktop.

Otherwise, you will not be able to allocate the board as a MIL system; calling

MsysAlloc() with M_SYSTEM_ORION_HD will fail.

Third, the Matrox Orion HD board has the same limitations as any other

DirectX-capable display board or display device. To work properly,

Matrox Orion HD requires the underlying Direct3D engine (GPU) to be in an

operational state. Some events can cause all Direct3D devices (for example,

Matrox Orion HD and other display boards) to transition to a lost device state.

While these devices are in a lost device state, some of their on-board capabilities

will not be available. For example, you cannot initiate grab or display operations

until Matrox Orion HD recovers from the lost device state.

Some well-known events that can cause a Direct3D device to transition into a lost

device state are:

• Changing the display resolution and desktop settings.

• Connecting to the computer using RemoteDesktop.

• Viewing the desktop from a remote client (such as, VNC).

❖ Note that, in most cases, if Matrox Orion HD is in the process of grabbing

images, the current grab will continue. The grab will only be interrupted if you

initiate a remote connection to the computer.

To recover gracefully from a lost device state, MIL and Matrox Orion HD will

wait for the event to be over before trying to transition back to an operational state.

❖ Note that Matrox Orion HD only supports DirectX version 9.

Software 13

Software

To operate Matrox Orion HD, you can use one or more Matrox Imaging software

products that supports the board. These are the Matrox Imaging Library (MIL)

and its derivatives (for example, MIL-Lite and Matrox Intellicam). All Matrox

software is supported under Windows. Consult your software manual for

supported versions of the operating system.

MIL MIL is a high-level programming library with an extensive set of optimized

functions for image capture, processing, analysis, transfer, compression, display,

and archiving. Image processing operations include point-to-point, statistical,

spatial filtering, morphological, geometric transformation, and FFT operations.

Analysis operations support calibration, are performed with sub-pixel accuracy,

and include pattern recognition (normalized grayscale correlation and Geometric

Model Finder), blob analysis, edge extraction and analysis, measurement, image

registration, metrology, character recognition (template-based and feature-based),

code recognition and verification (1D, 2D, and composite code types), bead

inspection (continuous strip of material), 3D reconstruction, and color analysis.

MIL applications are easily ported to new Matrox hardware platforms and can be

designed to take advantage of multi-processing and multi-threading

environments.

MIL-Lite MIL-Lite is a subset of MIL. It includes all the MIL functions for image

acquisition, transfer, display control, and archiving. It also allows you to perform

processing operations that are typically useful to pre-process grabbed images.

Matrox Intellicam Matrox Intellicam is an interactive Windows program that allows for fast video

source interfacing and provides interactive access to all the acquisition features of

your Matrox board. Matrox Intellicam also has the ability to create custom digitizer

configuration format (DCF) files, which MIL and its derivatives use to interface

to specific non-standard video sources. Matrox Intellicam is included with all

Matrox Imaging software products.

14 Chapter 1: Introduction

Essentials to get started

To begin using Matrox Orion HD, you must have a computer with the following:

• An available conventional x16 PCIe

*

slot.

• Processor with an Intel 32-bit or 64-bit architecture, or equivalent.

• A relatively up-to-date PCIe chipset.

• A proper power supply. Refer to the Electrical specifications section in Appendix B:

Technical information.

• MIL or one of its derivatives. This software should be installed after you install

your board.

Matrox does not guarantee compatibility with all computers that have the above

specifications. Please consult with your local Matrox Imaging representative, local

Matrox Imaging sales office, the Matrox web site, or the Matrox Imaging

Customer Support Group at headquarters before using a specific computer.

Consult your software package for other computer requirements (for example,

operating system and memory requirements).

*. It is strongly recommended to install Matrox Orion HD into a x16 PCIe slot. You can

also install Matrox Orion HD in a x8 PCIe slot that has a mechanical x16 connector;

however, the maximum transfer rate between Matrox Orion HD and the Host is

reduced by 50%.

Inspecting the Matrox Orion HD package 15

Inspecting the Matrox Orion HD package

You should check the contents of your Matrox Orion HD package when you first

open it. If something is missing or damaged, contact your Matrox representative.

Standard items

You should receive the following items:

•The Matrox Orion HD board.

• KX20 to 4 DVI-I cable adapter (two DVI-I connectors for input and two DVI-I

connectors for output).

SDI video output connector 2

SDI video output connector 1

SDI video input connector 1

SDI video input connector 2

Multi-format

input/output

connector

DVI-I connector 4/8

DVI-I connector 3/7

DVI-I connector 2/6

DVI-I connector 1/5

KX20

connector

4/8

3/7

2/6

1/5

16 Chapter 1: Introduction

• Four SMB to BNC cable adapters.

• Four DVI to VGA adapters. Note that although the adapters are white in the

image below, the color of the adapters you receive might vary.

Available separately

You might have also ordered one or more of the following:

• MIL or MIL-Lite. Matrox Intellicam is included with both of these software

packages.

Handling components

The electronic circuits in your computer and the circuits on Matrox Orion HD

are sensitive to static electricity and surges. Improper handling can seriously

damage the circuits. Be sure to drain static electricity from your body by touching

VGA

connector

DVI

connector

VGA

connector

DVI

connector

Installation 17

a metal fixture (or ground) before you touch any electronic component. In

addition, do not let your clothing come in contact with the circuit boards or

components.

Warning Before you add or remove devices from your computer, always turn off the power

to your computer and all peripherals.

Installation

The installation procedure consists of the following steps:

1. Complete the hardware installation procedure described in Chapter 2: Hardware

installation.

2. Complete the software installation procedure described in the documentation

accompanying your software package.

More information For information on using multiple Matrox Orion HD boards, refer to Chapter 3:

Using multiple Matrox Orion HD boards.

For hardware information, as well as environmental and electrical specifications,

and connector pinout descriptions, see Appendix B: Technical information.

This manual occasionally makes reference to a MIL-Lite function. However,

anything that can be accomplished with MIL-Lite can also be accomplished with

MIL.

Need help? If you experience problems during installation or while using this product, refer

to the support page on the Matrox Imaging web site:

www.matrox.com/imaging/support. This page provides answers to frequently

asked questions, as well as offers registered customers additional ways of obtaining

support.

If your question is not addressed and you are currently registered with the MIL

maintenance program, you can contact technical support. To do so, you should

first complete and submit the online Technical Support Request Form, accessible

from the above-mentioned page. Once the information is submitted, a Matrox

support agent will contact you shortly thereafter by email or phone, depending

on the problem.

18 Chapter 1: Introduction

Chapter

2

Chapter 2: Hardware

installation

This chapter explains how to install your Matrox Orion HD

board in your computer.

20 Chapter 2: Hardware installation

Installing your Matrox Orion HD board

Before you install your Matrox Orion HD board, some precautionary measures

must be taken. Turn off the power to your computer and its peripherals, and

unplug the power cord to drain all standby power. Drain static electricity from

your body (by touching a metal part of the computer chassis).

Important ❖ Note that your board should be installed before you install your software.

Proceed with the following steps to install your board:

1. Remove the cover from your computer; refer to your computer’s documentation

for instructions.

2. Check that you have an empty x16 PCIe

*

slot in which to install your Matrox

Orion HD.

*. It is strongly recommended to install Matrox Orion HD into a x16 PCIe slot. You can

also install Matrox Orion HD in a x8 PCIe slot that has a mechanical x16 connector;

however, the maximum transfer rate between Matrox Orion HD and the Host is

reduced by 50%.

x16 PCIe

32-bit PCI slot

x8 PCIe

x1 PCIe

64-bit PCI-X slot

La page charge ...

Matrox orion HD Installation And Hardware Manual

Matrox orion HD Installation And Hardware Manual

dans d''autres langues

Documents connexes

Autres documents