TEAC PD-H01 Le manuel du propriétaire

Catégorie
Lecteurs DVD
Taper
Le manuel du propriétaire
Z
ENGLISH
FRANÇAIS
ESPAÑOL
PD-H01
CD Player
MANUAL DEL USUARIO
Qué hay en la caja .................59
Antes de su utilización .............60
Discos .............................61
Utilización del mando a distancia ..64
Nombres y funciones de las partes
(mando a distancia) ...............65
Conexiones .......................66
Nombres y funciones de las partes
(mando a distancia) ...............68
Acerca de la función de ahorro de
energía automático ...............69
Pantalla. . . . . . . . . . . . . . . . . . . . . . . . . . . . 70
Funcionamiento básico. . . . . . . . . . . . 71
Utilización de la reproducción
programada .......................76
Solución de posibles fallos ........80
Especificaciones ...................82
MODE D’EMPLOI
Contenu de l'emballage ...........33
Avant l’utilisation ..................34
Disques ...........................35
Emploi de la télécommande .......38
Nomenclature et fonctions des
parties (unité principale) ...........39
Branchements .....................40
Nomenclature et fonctions des
parties (télécommande) ...........42
À propos de la fonction d'économie
automatique d'énergie ............43
Écran ..............................44
Fonctionnement de base. . . . . . . . . . 45
Lecture de programme ............50
Guide de dépannage ..............54
Caractéristiques techniques .......56
D01189620A
OWNER’S MANUAL
What’s in the Box ................... 7
Before use .......................... 8
Discs ...............................9
Using the remote control .......... 12
Names and functions of parts
(main unit) ........................13
Connections ......................14
Names and functions of parts
(remote control) ...................16
About the automatic power saving
function ........................... 17
Display ............................18
Basic operation .................... 19
Using program playback ..........24
Troubleshooting. . . . . . . . . . . . . . . . . . . 28
Specifications .....................30
PD-H01_OM_EFS_vA_CS6.indb 1 13/01/25 17:06
22
For U.S.A.
This equipment complies with Part 15 of FCC
RF Rules. Operation is subject to the following
two conditions: 1) This device may not cause
interference and 2) This device must accept any
interference, including interference that may
cause undesired operation of the device.
Information to the user:
This equipment has been tested and found
to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable
protection against harmful interference in a resi
-
dential installation. This equipment generates,
uses, and can radiate radio frequency energy
and, if not installed and used in accordance with
the instructions, may cause harmful interference
to radio communications. However, there is no
guarantee that interference will not occur in a
particular installation. If this equipment does
cause harmful interference to radio or television
reception, which can be determined by turning
the equipment off and on, the user is encour
-
aged to try to correct the interference by one or
more of the following measures:
Reorient or relocate the equipment and/or the
receiving antenna.
Increase the separation between the equipment
and receiver.
Connect the equipment into an outlet on a cir-
cuit different from that to which the receiver is
connected.
Consult the dealer or an experienced radio/TV
technician for help.
CAUTION
Changes or modifications to this equipment
not expressly approved by TEAC CORPORATION
for compliance will void the user’s warranty.
IMPORTANT SAFETY PRECAUTIONS
CAUTION
<
DO NOT REMOVE THE EXTERNAL CASES OR
CABINETS TO EXPOSE THE ELECTRONICS. NO
USER SERVICEABLE PARTS ARE WITHIN.
<
IF YOU ARE EXPERIENCING PROBLEMS WITH
THIS PRODUCT, CONTACT TEAC FOR A SERVICE
REFERRAL. DO NOT USE THE PRODUCT UNTIL IT
HAS BEEN REPAIRED.
<
USE OF CONTROLS OR ADJUSTMENTS OR
PERFORMANCE OF PROCEDURES OTHER THAN
THOSE SPECIFIED HEREIN MAY RESULT IN
HAZARDOUS RADIATION EXPOSURE.
WARNING: TO PREVENT FIRE OR
SHOCK HAZARD, DO NOT EXPOSE THIS
APPLIANCE TO RAIN OR MOISTURE.
CAUTION: TO REDUCE THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE COVER (OR BACK).
NO USER-SERVICEABLE PARTS INSIDE. REFER
SERVICING TO QUALIFIED SERVICE PERSONNEL.
The lightning flash with arrowhead symbol,
within an equilateral triangle, is intended
to alert the user to the presence of unin-
sulated “dangerous voltage” within the product’s
enclosure that may be of sufficient magnitude to con-
stitute a risk of electric shock to persons.
The exclamation point within an equilat-
eral triangle is intended to alert the user
to the presence of important operating
and maintenance (servicing) instructions in the litera-
ture accompanying the appliance.
IN USA/CANADA, USE ONLY ON 120 V SUPPLY.
PD-H01_OM_EFS_vA_CS6.indb 2 13/01/25 17:06
33
For Canada
Industry Canada’s Compliance Statement:
This Class B digital apparatus complies with
Canadian ICES-003.
Cet appareil numérique de la classe B est con-
forme à la norme NMB-003 du Canada.
Laser:
Type: TOP1100S
Manufacturer: TopRay Technologies, Inc
Laser output: Less than 0.5 mW on the
objective lens
Wavelength: 770-810nm (CD)
645-664nm (DVD)
Standard: IEC60825-1: 2007
MPEG Layer-3 audio coding technology licensed from
Fraunhofer IIS and Thomson.
This product is protected by certain intellectual
property rights of Microsoft. Use or distribution of
such technology outside of this product is prohibited
without a license from Microsoft.
Other company names and product names in this
document are the trademarks or registered trademarks
of their respective owners.
PD-H01_OM_EFS_vA_CS6.indb 3 13/01/25 17:06
44
<
Caution should be taken when using earphones
or headphones with the product because exces-
sive sound pressure (volume) from earphones or
headphones can cause hearing loss.
1) Read these instructions.
2) Keep these instructions.
3) Heed all warnings.
4) Follow all instructions.
5) Do not use this apparatus near water.
6) Clean only with dry cloth.
7) Do not block any ventilation openings. Install in
accordance with the manufacturers instructions.
8) Do not install near any heat sources such as radia-
tors, heat registers, stoves, or other apparatus
(including amplifiers) that produce heat.
9)
Do not defeat the safety purpose of the polarized
or grounding-type plug. A polarized plug has two
blades with one wider than the other. A grounding
type plug has two blades and a third grounding
prong. The wide blade or the third prong are pro-
vided for your safety. If the provided plug does not
fit into your outlet, consult an electrician for
replacement of the obsolete outlet.
10) Protect the power cord from being walked on or
pinched particularly at plugs, convenience
receptacles, and the point where they exit from
the apparatus.
11) Only use attachments/accessories specified by
the manufacturer.
12) Use only with the cart, stand, tripod,
bracket, or table
specified by the
manufacturer,
or sold with the
apparatus. When a cart is used, use
caution when moving the cart/apparatus combi-
nation to avoid injury from tip-over.
13) Unplug this apparatus during lightning storms or
when unused for long periods of time.
14) Refer all servicing to qualified service personnel.
Servicing is required when the apparatus has
been damaged in any way, such as power-supply
cord or plug is damaged, liquid has been spilled
or objects have fallen into the apparatus, the
apparatus has been exposed to rain or moisture,
does not operate normally, or has been dropped.
<
The apparatus draws nominal non-operating
power from the AC outlet with its POWER or
STANDBY/ON switch not in the ON position.
<
The mains plug is used as the disconnect device,
the disconnect device shall remain readily operable.
IMPORTANT SAFETY INSTRUCTIONS
<
Do not expose this apparatus to drips or splashes.
<
Do not place any objects lled with liquids, such
as vases, on the apparatus.
<
Do not install this apparatus in a conned space
such as a book case or similar unit.
<
The apparatus should be located close enough
to the AC outlet so that you can easily reach the
power cord plug at any time.
<
If the product uses batteries (including a battery
pack or installed batteries), they should not be
exposed to sunshine, re or excessive heat.
<
CAUTION for products that use replaceable lithium
batteries: there is danger of explosion if a battery is
replaced with an incorrect type of battery. Replace
only with the same or equivalent type.
Products with Class construction are equipped with
a power supply cord that has a grounding plug. The
cord of such a product must be plugged into an AC
outlet that has a protective grounding connection.
CAUTION
WARNING
PD-H01_OM_EFS_vA_CS6.indb 4 13/01/25 17:06
EN
Q Precautions concerning batteries
Misuse of batteries could cause them to
rupture or leak leading to fire, injury or
the staining of nearby things. Please read
and observe the following precautions
carefully.
o Be sure to insert the batteries with
correct positive (+) and negative (_)
orientations.
o Use batteries of the same type.
Never use different types of batteries
together.
o If the remote control is not used for a
long time (more than a month), remove
the batteries to prevent them from
leaking.
o If the batteries leak, wipe away the
leakage inside the battery compart-
ment and replace the batteries with
new ones.
o Do not use batteries of types other than
those specified. Do not mix new batter
-
ies with old ones or use different types
of batteries together.
o Do not heat or disassemble batteries.
Never throw batteries into fire or water.
o Do not carry or store batteries with other
metallic objects. The batteries could
short circuit, leak or explode.
o Never recharge a battery unless it is
confirmed to be a rechargeable type.
55
PD-H01_OM_EFS_vA_CS6.indb 5 13/01/25 17:06
For European Customers
Disposal of electrical and electronic equipment
(a) All electrical and electronic equipment should be disposed of separately from the municipal
waste stream via collection facilities designated by the government or local authorities.
(b) By disposing of electrical and electronic equipment correctly, you will help save valuable
resources and prevent any potential negative effects on human health and the environment.
(c) Improper disposal of waste electrical and electronic equipment can have serious effects on
the environment and human health because of the presence of hazardous substances in the
equipment.
(d) The Waste Electrical and Electronic Equipment (WEEE) symbol, which shows a
wheeled bin that has been crossed out, indicates that electrical and electronic
equipment must be collected and disposed of separately from household waste.
(e) Return and collection systems are available to end users. For more detailed informa-
tion about the disposal of old electrical and electronic equipment, please contact your city
office, waste disposal service or the shop where you purchased the equipment.
Disposal of batteries and/or accumulators
(a) Waste batteries and/or accumulators should be disposed of separately from the municipal
waste stream via collection facilities designated by the government or local authorities.
(b) By disposing of waste batteries and/or accumulators correctly, you will help save valuable
resources and prevent any potential negative effects on human health and the environment.
(c) Improper disposal of waste batteries and/or accumulators can have serious effects on the
environment and human health because of the presence of hazardous substances in them.
(d) The WEEE symbol, which shows a wheeled bin that has been crossed out, indicates
that batteries and/or accumulators must be collected and disposed of separately
from household waste.
If a battery or accumulator contains more than the specified values of lead (Pb),
mercury (Hg), and/or cadmium (Cd) as defined in the Battery Directive (2006/66/EC), then the
chemical symbols for those elements will be indicated beneath the WEEE symbol.
(e) Return and collection systems are available to end users. For more detailed information about
the disposal of waste batteries and/or accumulators, please contact your city office, waste
disposal service or the shop where you purchased them.
Pb
, Hg,
Cd
6
PD-H01_OM_EFS_vA_CS6.indb 6 13/01/25 17:06
EN
Whats in the Box
Check to be sure the box includes all the supplied accessories shown below. Please contact the
store where you purchased this unit if any of these accessories are missing or have been damaged
during transportation.
AC adapter (PS-M0620) × 1
Power cord for AC adapter × 1
RCA audio cable × 1
Remote control unit (RC-1284) × 1
Batteries for remote control unit (AAA) × 2
Owner's manual (this document) × 1
o Keep this manual in a safe place for future reference.
Warranty card × 1
7
PD-H01_OM_EFS_vA_CS6.indb 7 13/01/25 17:06
Q Precautions for placement
o Do not put anything on top of the unit.
o Avoid placing the unit in direct sunlight, close to a source of heat or in other similar conditions.
Do not place the unit on top of an amplifier or other equipment that might generate heat that
exceeds the operating temperature range of this unit. Doing so could cause discoloration, defor-
mation or malfunction. (This unit can be placed on top of a TEAC A-H01 without problem.)
o Avoid locations that are subject to vibrations or exposed to excessive dust, cold or moisture.
o Place the unit in a stable location near the audio system that you will use with it.
o Do not move the unit during use.
o The voltage supplied to the unit should match the voltage printed on the AC adapter. If you are
in any doubt regarding this matter, consult an electrician.
o As the unit could become warm during operation, always leave sufficient space around it for
ventilation. When placing this unit, position it so that it is at least 20 cm (8) from walls and other
devices in order to allow good heat dissipation. When installing it in a rack, leave at least 15 cm
(6) open above the unit and 10 cm (4) behind it.
o Do not open the body of the unit as this might result in damage to the circuitry or cause elec-
tric shock. If a foreign object should get inside the unit, contact your dealer or TEAC customer
service.
o When removing the power plug from the wall outlet, always pull directly on the plug; never
yank on the cord.
o When the unit is turned on, if a TV is turned on nearby lines might appear on its screen depend-
ing on the characteristics of the TV broadcast signal. This is not a malfunction of the unit nor of
the TV. If this occurs, press the STANDBY/ON button to put the unit in standby.
Q Use precaution
Listening to anything at a high volume for a long time could be harmful to your hearing. In order
to protect your ears, be careful not to set the volume too high when listening with headphones for
long periods of time.
Cleaning
Wipe the acrylic part of the top cover with a soft cloth. Clean dirt from panel surfaces by wiping
them with a soft cloth that has been slightly dampened with a diluted neutral cleaning fluid.
o Do not use chemical cleaning cloths, thinner or similar substances as they could damage the
surface of the unit.
Q For safety, disconnect the power plug from the outlet before cleaning.
Before use
8
PD-H01_OM_EFS_vA_CS6.indb 8 13/01/25 17:06
EN
Discs (1)
This unit can play discs that meet the following requirements.
CDs (12cm) with the Compact Disc Digital Audio logo
o This logo is shown on the disc label and package.
o This unit cannot play 8cm CDs.
CD-R and CD-RW discs that have been created in the audio CD
format and finalized correctly.
CD-R and CD-RW discs that have been written with MP3 or WMA
files and finalized.
o Multi-session discs are not supported.
This unit cannot play any other types of discs.
V If you try to play any other type of disc with this unit, loud noises that damage speak-
ers or harm hearing could occur. Never try to play any other type of disc with this unit.
o Depending on the quality of the disc and the condition of the recording, playback might not be
possible.
o This unit cannot read or play the following types of discs.
Video CDs
CD-ROM discs
Super Audio CDs
DVD video discs
DVD audio discs
DVD-ROM discs
V If you load a DVD video, DVD audio, DVD-ROM or similar disc into this unit, the unit
will try to play it and spin at high speed. If you accidentally load such a disc, the disc
could be damaged, so do not try to remove it until it stops spinning.
o This unit might not be able to properly play back Copy Control CDs, Dual Discs and other special
CDs that do not conform to the Red Book CD standard. Operation and sound quality cannot be
guaranteed when special discs are used in this unit. If playback of a special disc should cause
trouble, contact the seller of the disc.
9
PD-H01_OM_EFS_vA_CS6.indb 9 13/01/25 17:06
Discs (2)
CD-R/CD-RW discs
This unit can play CD-R/CD-RW discs that are in audio CD format (CD-DA) or that contain MP3 or
WMA format files.
o In order to play a disc created by a CD recorder, be sure to finalize it.
o Depending on the quality of the disc and the condition of the recording, playback might not be
possible. Read the manual of the equipment you used to make the disc for details.
o If you have any questions about how to handle a CD-R or CD-RW disc, contact the seller of the
disc directly.
Precautions for use
o Do not use cracked discs because they could damage the unit.
o Do not apply labels or other materials to discs. Do not use discs that have had tape, stickers or
similar materials removed from them as they may have left a sticky residue on the disc’s surface.
Other discs to avoid are ones that have exposed glue around the edges of stickers, for example.
Using such a disc in this unit could cause the disc to become stuck or could damage the unit.
o When writing something on the label side of a disc, use a felt tip permanent marker. The use of a
ballpoint pen or other pen with a hard tip could damage the disc, making it unplayable.
o Never use commercially-available CD stabilizers. Doing so could make the disc unplayable or
damage the unit.
o Never use CDs with irregular shapes, including heart-shaped and octagonal discs because such
discs could damage the unit.
o To remove a disc from its case, press down on the center of the case and hold the disc by its
edges. Do not touch the side of the disc that has the data encoded on it (unlabeled side).
10
PD-H01_OM_EFS_vA_CS6.indb 10 13/01/25 17:06
EN
Inserting discs
As shown in the illustration, hold the disc by its edges with its labeled side up and insert it partway.
Push the disc in further until just before it disappears. It will automatically be drawn in to the slot.
If a disc cannot be inserted properly
If a disc becomes caught or is otherwise difficult to insert, do not push it in forcefully. Press the
EJECT (-) button and remove the disc once before trying to reinsert it. (Pushing a disc forcefully
could damage the unit.)
Storing discs
o Discs should be stored in their cases when not being used. Failure to do so could result in warp-
ing and scratches.
o Do not leave discs in places that are exposed to direct sunlight or that are very humid or hot.
Long exposure to such conditions could warp or degrade discs, making them unplayable.
o Since CD-R/CD-RW discs are more susceptible to the effects of heat and ultraviolet rays com-
pared to ordinary CDs, do not leave them for long periods of time in places that are, for example,
exposed to direct sunlight or near equipment that generate heat.
o Smudges on a disc might cause the sound to skip or degrade the sound quality. Always clean
discs before storing them.
Cleaning discs
o If the side of the disc that has the data encoded on it (unlabeled side) becomes dirty with finger-
prints or dust, use a soft cloth to wipe the surface from the center directly toward the edge.
o Never use record cleaners, antistatic treatments, thinners or similar chemicals to clean discs.
Such chemicals could harm the surface of the disc.
11
PD-H01_OM_EFS_vA_CS6.indb 11 13/01/25 17:06
Using the remote control
Precautions for use
Q Misuse of batteries could cause them to rupture or leak, which might result in fire,
injury or the staining of nearby materials. Please read and observe the precautions
on page 5 carefully.
o When using the remote control, point it toward the remote control signal receiver on the main
unit from a distance of 5 m (16 ft) or less. Do not place obstacles between the main unit and the
remote control.
o The remote control might not work if the remote control signal receiver on the main unit is
exposed to sunlight or bright lights. In this case, try moving the main unit.
o Beware that use of this remote control could cause the unintentional operation of other devices
that can be controlled by infrared rays.
Installing batteries
Remove the cover on the back of the remote control, and insert 2 AAA batteries into the case, align-
ing them with the
+
and
_
indications. Replace the cover.
When to replace batteries
If the distance required between the remote and main unit decreases or if the unit stops respond-
ing to the remote buttons, replace both batteries with new ones.
Dispose of the used batteries according to the instructions on them or requirements set by your
local municipality.
12
PD-H01_OM_EFS_vA_CS6.indb 12 13/01/25 17:06
EN
Names and functions of parts (main unit)
A
STANDBY/ON button
Press to put the unit in standby or turn it ON. When the unit is ON, the ring around the button
lights blue.
B
Remote control signal receiver
This receives signals from the remote control. When using the remote control, point the remote
control here.
C
Disc slot
Insert discs here. After a disc has been partially inserted, it will automatically be drawn into the
unit.
D
Display
This shows various information.
E
Skip (
.
/
/
) buttons
Use to skip to the previous or next track.
Press and hold during playback to search backward/forward. Press the Play/Pause (y/J) button
at the point when you want to listen.
F
Play/Pause (
7
/
9
) button
Press when stopped or paused to start or resume playback.
Press during playback to pause.
G
Stop/Eject (
8
/
-
) button
Press during playback to stop playback.
Press when stopped to partially eject the disc. Hold the edges of the disc and pull it out.
A C
B
E FD G
13
PD-H01_OM_EFS_vA_CS6.indb 13 13/01/25 17:06
Q Do not turn the unit on until after making all connections.
o Carefully read the manuals of the devices that you are connecting and follow
their instructions when making connections.
o Do not bundle connecting cables with power cords. Doing so could cause noise.
o Connect all plugs completely.
Connections
Powe
r
outlet
A
PS-M0620
Included
AC adapter
power cord
C
B
LR
DIGITAL IN
(OPTICAL)
Optical digital input
UD-H01, A-H01
or other digital
sound input device
UD-H01, A-H01
or other digital
sound input device
RCA audio cable
Optical digital cable
RCA coaxial digital cable
Audio input
(LINE IN, etc.)
DIGITAL IN
(COAXIAL)
Coaxial digital input
TEAC A-H01,
stereo ampier or
powered speakers
14
PD-H01_OM_EFS_vA_CS6.indb 14 13/01/25 17:06
EN
A
Analog audio output jacks
These output 2 channels of analog audio. Connect a stereo amplifier or powered speakers to
them.
Use the included cable or a commercially-available cable for these connections.
White (L)
Red (R)
White (L)
Red (R)
B
Digital audio output connectors (COAXIAL, OPTICAL)
These output digital audio. Connect these to the digital audio inputs of digital audio devices.
COAXIAL: coaxial digital cable (RCA)
OPTICAL: optical digital cable (TOS)
o Use commercially-available cables for these connections.
C
DC power connector (DC IN 6V)
After all other connections have been completed, connect the included PS-M0620 AC adapter
to this connector and connect the AC adapter power cord to the adapter.
Then, connect the AC adapter power cord plug to an AC power outlet.
o Unplug the power cord if the unit will not be used for a long period of time.
Q Do not use any AC adapter or power cord other than the included PS-M0620 AC adapter
and AC adapter power cord.
15
PD-H01_OM_EFS_vA_CS6.indb 15 13/01/25 17:06
Names and functions of parts (remote control)
H
I
J
K
L
M
B
A
D
C
E
F
G
The RC-1284 remote control can also be used
to control the A-H01’s mute and volume
settings.
In this manual, we explain the buttons that
can be used with the PD-H01.
A
Eject (-) button
Press when stopped to partially eject the disc.
Hold the disc by its edges and pull it out.
B
Number buttons
Use to select and program tracks (pages
24 to 27).
C
CLEAR button
Use to clear programmed tracks (page 27).
D
Search (m/,) buttons
Press during playback to search backward/
forward (page 21).
E
Skip (.//) buttons
Use to skip to the previous or next track
(page 20).
F
Play/Pause (G/ J) button
Press when stopped or paused to start or
resume playback (page 19).
Press during playback to pause (page 20).
G
Stop (8) button
Press during playback to stop playback
(page 20).
H
DISPLAY button
Press to change what is shown on the display
(page 18).
I
DIMMER button
Use to adjust the brightness of the display
(page 18).
J
PROGRAM button
Use with program playback (page 24).
K
REPEAT (¼) button
Use for repeat playback (page 22).
L
SHUFFLE (½) button
Use for shuffle playback(page 23).
M
ENTER button
Use to confirm after entering a track number.
1616
PD-H01_OM_EFS_vA_CS6.indb 16 13/01/25 17:06
EN
About the automatic power saving function
This unit complies with the European Energy-related
Products Directive (ErP). In order to comply with this
directive, the default automatic power saving function
has been set to 30 minutes, so the unit will enter standby
mode automatically if 30 minutes elapse without any
operation or audio output.
Ending standby
Press any button (other than MUTE or VOLUME) on the
main unit or the remote control to turn the unit on again.
Setting the automatic power saving function
When no disc is loaded in the unit, press the Stop/Eject
(8/-) button on the main unit for at least three seconds
to turn the automatic power saving function ON or OFF.
The current setting is shown on the display.
Display when automatic power saving function is ON
Display when automatic power saving function is OFF
Press for at least three seconds.
17
PD-H01_OM_EFS_vA_CS6.indb 17 13/01/25 17:06
Display
Changing the information shown
You can change the information shown on the display.
Each time you press the DISPLAY button, the information
shown changes as follows.
Audio CD
Elapsed time during playback
(minutes: seconds)
Z
Remaining time during playback
(minutes: seconds)
Z
T
otal disc remaining time
(minutes: seconds)*
Z
Number of track playing back
*This is not shown during shuffle playback.
MP3/WMA
Elapsed time during playback
(minutes: seconds)
Z
Number of le playing back
Dimmer
You can adjust the brightness of the display.
Each time you press the DIMMER button, the brightness of
the display changes as follows.
NORMAL (Ordinary brightness)
Z
DIMMER1 (Slightly dim)
Z
DIMMER2 (
Very dim)
Z
DIMMER3 (Back
light o )
18
PD-H01_OM_EFS_vA_CS6.indb 18 13/01/25 17:06
EN
Basic operation (1)
1
Press the STANDBY/ON button to turn the unit
ON.
o When the unit is ON, the ring around the button
lights blue.
o In order to prevent sudden loud noises, turn the
amplifier ON last.
2
As shown in the illustration to the right, hold the
disc by its edges with the labeled side up and insert
it partway.
3
Push the disc in further until just before it disap-
pears. It will automatically be drawn in to the slot.
4
Press the Play/Pause (y/9) button to start
playback.
o During MP3 playback, “MP3” appears on the display.
During WMA playback, WMA appears on the display.
During audio CD playback, nothing appears on the
display.
19
PD-H01_OM_EFS_vA_CS6.indb 19 13/01/25 17:06
Stopping playback
Press the Stop (8) button.
Ejecting a disc
When playback is stopped press the Eject (-) button.
Pausing playback
During playback, press the Play/Pause (y/J) button to
pause playback.
When paused, press the Play/Pause (y/J) button to
resume playback.
Skipping tracks
During playback, press a Skip (.//) button to skip
to the previous or next track and start playback. Keep
pressing until you reach the track you want. Playback will
start from the beginning of the selected track.
o During playback, press . once to return to the begin-
ning of the track being played. To play an even earlier
track, continue pressing ..
Basic operation (2)
20
PD-H01_OM_EFS_vA_CS6.indb 20 13/01/25 17:06
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72
  • Page 73 73
  • Page 74 74
  • Page 75 75
  • Page 76 76
  • Page 77 77
  • Page 78 78
  • Page 79 79
  • Page 80 80
  • Page 81 81
  • Page 82 82
  • Page 83 83
  • Page 84 84

TEAC PD-H01 Le manuel du propriétaire

Catégorie
Lecteurs DVD
Taper
Le manuel du propriétaire

dans d''autres langues