Anker NEBULA Mode d'emploi

Taper
Mode d'emploi
support.seenebula.com/s
For a detailed user manual and more information,
scan the QR code or visit:
(For Middle East and Africa Only)
+1 (800) 988 7973 (US/Canada)
+44 (0) 1604 936200 (UK)
+49 (0) 69 9579 7960 (DE)
+971 42428633 (Middle East & Africa)
+971 8000320817 (UAE)
+966 8008500030 (KSA)
+965 22069086 (Kuwait)
+20 8000000826 (Egypt)
+61 3 8331 4800 (AU)
+90 (850) 460 14 14 (TR)
+8 (800) 511-86-23 (RU)
+86 400 0550 036 中国
03 4455 7823
+82 02-1670-7098 (한국)
+91 18003138831 (India)
© Anker Innovations Limited. All rights reserved.
NEBULA and the NEBULA logo are trademarks of Anker Innovations
Limited, registered in the United States and other countries.
Model: D2426
51005003592 V01
Your product is designed and manufactured with
high quality materials and components, which can
be recycled and reused.
This symbol means the product must not be
discarded as household waste, and should be
delivered to an appropriate collection facility for
recycling. Proper disposal and recycling helps
protect natural resources, human health, and the
CAUTION: RISK OF EXPLOSION IF BATTERY IS
REPLACED BY AN INCORRECT TYPE. DISPOSE
OF USED BATTERIES ACCORDING TO THE
INSTRUCTIONS.
ATTENTION RISQUE D'EXPLOSION SI LA
BATTERIE EST REMPLACÉE PAR UN TYPE
INCORRECT. ÉLIMINER LES BATTERIES USÉES
SELON LES INSTRUCTIONS.
Nebula Capsule 3 Laser
Quick Start Guide
Important Safety Instructions
• Due to the enclosure material, the product must only
be connected to a USB 2.0 or higher.
• The adapter shall be installed near the product and
shall be easily accessible.
• Please ensure you use only the adapter offered by the
manufacturer. Using unauthorized adapter may cause
danger and violate the authorization of the product and
the guarantee article.
• Do not use the product in an environment where
the temperature is too high or too low. Never expose
the product to strong sunshine or wet environments.
• It is recommended to supply the product in an
environment with a temperature that ranges from
5°C-25°C.
• When supplying, place the device in an environment
that has a normal room temperature and good
ventilation.
• Possibly hazardous optical radiation emitted from this
product may be harmful to the eyes. Do not stare at
operating beam.
• Potential hazards may exist during lamp or product
servicing.
• Service shall be performed only by authorized, trained
servicing, trained servicing personnel.
• Do not open the enclosure of the product.
• When the enclosure of the product is damaged, please
do not use it anymore.
• Do not open the enclosure of laser module inside the
product.
• When the enclosure of laser module inside the product
is damaged, please do not use it anymore.
• Laser inside, be aware of the risk of skin or corneal
burns.
• Do not use the product in any way other than
described herein in order to avoid personal injury or
property damage.
• User should comply with the laws and regulations of
the corresponding countries and regions where the
equipment is located (used), abide by professional
ethics, pay attention to safety obligations, and strictly
prohibit the use of our products or equipment for any
illegal purposes. Our company will not be responsible
for any violators' legal liability under any circumstances.
Warning:
• Replacement of a battery with an incorrect type that
can defeat a safeguard;
• Disposal of a battery into fire or a hot oven, or
mechanically crushing or cutting of a battery, that can
result in an explosion;
• Leaving a battery in an extremely high temperature
surrounding environment that can result in an
explosion or the leakage of flammable liquid or gas;
and
• A battery subjected to extremely low air pressure that
may result in an explosion or the leakage of flammable
liquid or gas.
Attention:
• Remplacement d’une batterie par un type incorrect
pouvant supprimer une protection;
• Mise au rebut d’une batterie dans un feu ou dans un
four chaud, ou écrasement mécanique ou coupure
d’une batterie, susceptible de provoquer une explosion;
• Maintien d’une batterie dans un environnement à très
haute température pouvant provoquer une explosion
ou la fuite de liquide ou de gaz inflammables; et
• Batterie soumise à une pression de l’air extrêmement
faible pouvant provoquer une explosion ou la fuite de
liquide ou de gaz inflammables.
Notice (Europe and United Kingdom)
Declaration of Conformity
Hereby, Anker Innovations Limited declares that this
device is in compliance with the essential requirements
and other relevant provisions of Directive 2014/53/EU.
For the Declaration of Conformity, visit the Web site
https://uk.seenebula.com/.
Declaration of Conformity
Hereby, Anker Innovations Limited declares that this
device is in compliance with Radio Equipment
Regulations 2017(SI 2017/1206). The full text of the UK
declaration of conformity is available at the following
internet address: https://uk.seenebula.com/.
The suitable temperature range for the projector and its
accessories is 0°C-25°C.
The adapter is for indoor use only. The adapter type is
PN453I (with rated output voltage / current of 5VDC/3A
or 9VDC/3A or 12VDC/3A or 15VDC/3A or
20VDC/2.25A) or A2713 (with rated output voltage /
current of 5VDC/3A or 9VDC/3A or 15VDC/3A or
20VDC/3.25A).
RF exposure information
The Maximum Permissible Exposure (MPE) level has
been calculated based on a distance of d=20 cm
between the device and the human body. To maintain
compliance with RF exposure requirement, use product
that maintain a 20cm distance between the device and
human body.
Frequency bands and power as below:
5150~5350 MHz can be used indoors only.
The following importer is the responsible party (contract
for EU matters):
Anker Innovations Deutschland GmbH I
Georg-Muche-Strasse 3, 80807 Munich, Germany
The following importer is the responsible party (contract
for UK matters):
Anker Technology (UK) Limited I GNR8, 49 Clarendon
Road, Watford, Hertfordshire, WD17 1HP, United
Kingdom
This product complies with the radio interference
requirements of the European Community.
This product complies with the radio
interference requirements of the United
Kingdom.
Notice (United States of America)
FCC Statement
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1)
this device may not cause harmful interference, and (2)
this device must accept any interference received,
including interference that may cause undesired
operation.
Warning: Changes or modifications not expressly
approved by the party responsible for compliance could
void the user's authority to operate the equipment.
Note: This equipment has been tested and found to
comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against
harmful interference in a residential installation.
This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications. However, there is
no guarantee that interference will not occur in a
particular installation. If this equipment does cause
harmful interference to radio or television reception,
which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
(1) Reorient or relocate the receiving antenna. (2)
Increase the separation between the equipment and
receiver. (3) Connect the equipment into an outlet on a
circuit different from that to which the receiver is
connected. (4) Consult the dealer or an experienced
radio/TV technician for help.
5150~5350 MHz can be used indoors only
FCC Radio Frequency Exposure Statement
The device has been evaluated to meet general RF
exposure requirements. The device can be used in
fixed/mobile exposure condition. The min separation
distance is 20cm.
Notice: Shielded cables
All connections to other computing devices must be
made using shielded cables to maintain compliance
with FCC regulations.
The following importer is the responsible party.
Company Name: Fantasia Trading LLC
Address: 5350 Ontario Mills Pkwy, Suite 100, Ontario, CA
91764
Telephone: 1-800-988-7973
Notice (Canada)
IC Statement
This device complies with Industry Canada
licence-exempt RSS standard(s). Operation is subject to
the following two conditions:
1) this device may not cause interference, and
2) this device must accept any interference, including
interference that may cause undesired operation of the
device.
Le présent appareil est conforme aux CNR d'Industrie
Canada applicables aux appareils radio exempts de
licence. L'exploitation est autorisée aux deux conditions
suivantes:
1) l'appareil nedoit pas produire de brouillage, et
2) l'utilisateur de l'appareil doit accepter tout brouillage
radioélectrique subi, même si le brouillage est
susceptible d'en compromettre le fonctionnement.
This Class B digital apparatus complies with Canadian
ICES-003.
Cet appareil numérique de la classe B est conforme à la
norme NMB-003 du Canada.
IC RF Statement
When using the product, maintain a distance of 20cm
from the body to ensure compliance with RF exposure
requirements.
Lors de l'utilisation du produit, maintenez une distance
de 20 cm du corps afin de vous conformer aux
exigences en matière d'exposition RF.
5150~5250 MHz can be used indoors only.
5150~5250 MHz peut être utilisé à l'intérieur
uniquement.
Notice (Republic of Korea)
제품명 : 특정소출력 무선기기 ( 무선데이터통신시스템용
무선기기 )
제조자및제조국가Anker Innovations Limited
제조년월2022.09
해당 무선설비는 운용 중 전파혼신 가능성이 있음 . 해당
무선설비는 전파혼신 가능성이 있으므로 인명안전과 관련된
서비스는 할수 없음 .
The Bluetooth® word mark and logos are registered
trademarks owned by the Bluetooth SIG, Inc. and any
use of such marks by Anker Innovations Limited is
under license. Other trademarks and trade names are
those of their respective owners.
HDMI, and HDMI logo and High-Definition Multimedia
Interface are trademarks or registered trademarks of
HDMI licensing LLC in the United States and other
countries.
Manufactured under license from Dolby Laboratories.
Dolby, Dolby Audio, and the double-D symbol are
trademarks of Dolby Laboratories Licensing Corporation.
Anker Innovations Limited
Room 1318-19, Hollywood Plaza, 610 Nathan Road,
Mongkok, Kowloon, Hong Kong
RG1 IEC 62471-5:2015
Complies with IEC 60825-1:2014 Class 1 and IEC
62471-5:2015 Risk Group 1
Lorem ipsum
모델명 : D2426
인증번호 : R-C-AIl-D2426
environment. For more information on disposal
and recycling of this product, contact your local
municipality, disposal service, or the shop where
you bought this product.
Function Bands Max.PowerOperation Frequency
Bluetooth
(Projector)
WIFI
(Projector)
Bluetooth
(Remote Control)
2.4 GHz 2402-2480 MHz EIRP 13.58dBm
2.4 GHz 2412-2472 MHz EIRP 19.8dBm
5 GHz
5150-5250 MHz EIRP 22.32dBm
5250-5350 MHz EIRP 19.7 dBm
5470-5725 MHz EIRP 19.96 dBm
5725-5850 MHz EIRP 13.93 dBm
2.4 GHz 2402-2480 MHz EIRP 8.0 dBm
EE FI FR DE EL HU IE
IT LV LT LU MT NL PL
PT RO SK SI ES SE UK
AT BE BG HR CY CZ DK
13 16 1817151411 12
3. Play Through External
Sound Devices
4. Play from a USB Drive
Charge Your Projector
1. Front View 1. Overview
2. Rear View
3. Top View
4. Bottom View
Remote Control
1. Screen Mirroring 2. Play from HDMI Playback Devices
Use as a Projector
To replace the batteries, slide off the
battery compartment backplate, insert new
batteries (matching the polarity (+/-) as
indicated), and close the battery
compartment.
2
For first-time use, slide to open the battery
compartment, and install two AAA batteries.
Return to the
previous menu
Power on / off
Access more
options
Access the
home menu
Volume up / down
Adjust focus
Press to activate
Google Assistant
Navigation
Confirm a
selection /
pause / resume
Remote Control: Nebula RC
Model: D0413X
At a Glance Use as a Bluetooth Speaker
Download the Nebula Connect app for the best
projector experience.
Nebula Connect App
Lens
Volume up /
down buttons
Confirmation button
Return button
Navigation buttons
Infrared receiver
Mode button
Power button
USB-C port
HDMI port
AUX-OUT socket
Speaker
Camera for autofocus
and auto keystone
correction
1/4" tripod socket
+
+
Slightly move the projector to enable
autofocus and auto keystone correction.
Press to enable autofocus.
3”
Press and hold for 3 seconds to power on
the projector.
2. Prepare the Remote Control
For first-time use, fully charge the built-in battery
using the provided adapter. Press to switch to Bluetooth speaker mode and
select Nebula Capsule 3 Laser to connect.
Power On
Enable Autofocus
Basic Setup
ON
For first-time use, follow the on-screen
instructions to complete the basic setup. Adjust
settings in the projector's Settings menu if
necessary.
Connect to HDMI playback devices such as a TV
box, TV stick, DVD player, set-top box (STB), or
gaming consoles.
Connect to external sound output devices, including
headphones and speakers.
Connect to a USB-A drive (with the USB converter)
or USB-C drive to enjoy stored music, video, and
pictures.
(not included)
Wirelessly cast movies, games, and music from
your phone to Nebula Capsule 3 Laser.
Play a video clip on your phone and tap the
cast icon on the video screen.
Select the device D2426. The projector will
mirror the screen of the connected phone.
1
2
T
Make sure Nebula Capsule
3 Laser and your phone
are connected to the same
wireless network.
USB-C
1
< Settings Bluetooth
Nebula Capsule 3 Laser
Bluetooth
Connected
DEVICE
Pairing
Connected
Important Safety Instructions
• Due to the enclosure material, the product must only
be connected to a USB 2.0 or higher.
• The adapter shall be installed near the product and
shall be easily accessible.
• Please ensure you use only the adapter offered by the
manufacturer. Using unauthorized adapter may cause
danger and violate the authorization of the product and
the guarantee article.
• Do not use the product in an environment where
the temperature is too high or too low. Never expose
the product to strong sunshine or wet environments.
• It is recommended to supply the product in an
environment with a temperature that ranges from
5°C-25°C.
• When supplying, place the device in an environment
that has a normal room temperature and good
ventilation.
• Possibly hazardous optical radiation emitted from this
product may be harmful to the eyes. Do not stare at
operating beam.
• Potential hazards may exist during lamp or product
servicing.
• Service shall be performed only by authorized, trained
servicing, trained servicing personnel.
• Do not open the enclosure of the product.
• When the enclosure of the product is damaged, please
do not use it anymore.
• Do not open the enclosure of laser module inside the
product.
• When the enclosure of laser module inside the product
is damaged, please do not use it anymore.
• Laser inside, be aware of the risk of skin or corneal
burns.
• Do not use the product in any way other than
described herein in order to avoid personal injury or
property damage.
• User should comply with the laws and regulations of
the corresponding countries and regions where the
equipment is located (used), abide by professional
ethics, pay attention to safety obligations, and strictly
prohibit the use of our products or equipment for any
illegal purposes. Our company will not be responsible
for any violators' legal liability under any circumstances.
Warning:
• Replacement of a battery with an incorrect type that
can defeat a safeguard;
• Disposal of a battery into fire or a hot oven, or
mechanically crushing or cutting of a battery, that can
result in an explosion;
• Leaving a battery in an extremely high temperature
surrounding environment that can result in an
explosion or the leakage of flammable liquid or gas;
and
• A battery subjected to extremely low air pressure that
may result in an explosion or the leakage of flammable
liquid or gas.
Attention:
• Remplacement d’une batterie par un type incorrect
pouvant supprimer une protection;
• Mise au rebut d’une batterie dans un feu ou dans un
four chaud, ou écrasement mécanique ou coupure
d’une batterie, susceptible de provoquer une explosion;
• Maintien d’une batterie dans un environnement à très
haute température pouvant provoquer une explosion
ou la fuite de liquide ou de gaz inflammables; et
• Batterie soumise à une pression de l’air extrêmement
faible pouvant provoquer une explosion ou la fuite de
liquide ou de gaz inflammables.
Notice (Europe and United Kingdom)
Declaration of Conformity
Hereby, Anker Innovations Limited declares that this
device is in compliance with the essential requirements
and other relevant provisions of Directive 2014/53/EU.
For the Declaration of Conformity, visit the Web site
https://uk.seenebula.com/.
Declaration of Conformity
Hereby, Anker Innovations Limited declares that this
device is in compliance with Radio Equipment
Regulations 2017(SI 2017/1206). The full text of the UK
declaration of conformity is available at the following
internet address: https://uk.seenebula.com/.
The suitable temperature range for the projector and its
accessories is 0°C-25°C.
The adapter is for indoor use only. The adapter type is
PN453I (with rated output voltage / current of 5VDC/3A
or 9VDC/3A or 12VDC/3A or 15VDC/3A or
20VDC/2.25A) or A2713 (with rated output voltage /
current of 5VDC/3A or 9VDC/3A or 15VDC/3A or
20VDC/3.25A).
RF exposure information
The Maximum Permissible Exposure (MPE) level has
been calculated based on a distance of d=20 cm
between the device and the human body. To maintain
compliance with RF exposure requirement, use product
that maintain a 20cm distance between the device and
human body.
Frequency bands and power as below:
5150~5350 MHz can be used indoors only.
The following importer is the responsible party (contract
for EU matters):
Anker Innovations Deutschland GmbH I
Georg-Muche-Strasse 3, 80807 Munich, Germany
The following importer is the responsible party (contract
for UK matters):
Anker Technology (UK) Limited I GNR8, 49 Clarendon
Road, Watford, Hertfordshire, WD17 1HP, United
Kingdom
Notice (United States of America)
FCC Statement
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1)
this device may not cause harmful interference, and (2)
this device must accept any interference received,
including interference that may cause undesired
operation.
Warning: Changes or modifications not expressly
approved by the party responsible for compliance could
void the user's authority to operate the equipment.
Note: This equipment has been tested and found to
comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against
harmful interference in a residential installation.
This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications. However, there is
no guarantee that interference will not occur in a
particular installation. If this equipment does cause
harmful interference to radio or television reception,
which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
(1) Reorient or relocate the receiving antenna. (2)
Increase the separation between the equipment and
receiver. (3) Connect the equipment into an outlet on a
circuit different from that to which the receiver is
connected. (4) Consult the dealer or an experienced
radio/TV technician for help.
FCC Radio Frequency Exposure Statement
The device has been evaluated to meet general RF
exposure requirements. The device can be used in
fixed/mobile exposure condition. The min separation
distance is 20cm.
Notice: Shielded cables
All connections to other computing devices must be
made using shielded cables to maintain compliance
with FCC regulations.
The following importer is the responsible party.
Company Name: Fantasia Trading LLC
Address: 5350 Ontario Mills Pkwy, Suite 100, Ontario, CA
91764
Telephone: 1-800-988-7973
Notice (Canada)
IC Statement
This device complies with Industry Canada
licence-exempt RSS standard(s). Operation is subject to
the following two conditions:
1) this device may not cause interference, and
2) this device must accept any interference, including
interference that may cause undesired operation of the
device.
Le présent appareil est conforme aux CNR d'Industrie
Canada applicables aux appareils radio exempts de
licence. L'exploitation est autorisée aux deux conditions
suivantes:
1) l'appareil nedoit pas produire de brouillage, et
2) l'utilisateur de l'appareil doit accepter tout brouillage
radioélectrique subi, même si le brouillage est
susceptible d'en compromettre le fonctionnement.
This Class B digital apparatus complies with Canadian
ICES-003.
Cet appareil numérique de la classe B est conforme à la
norme NMB-003 du Canada.
IC RF Statement
When using the product, maintain a distance of 20cm
from the body to ensure compliance with RF exposure
requirements.
Lors de l'utilisation du produit, maintenez une distance
de 20 cm du corps afin de vous conformer aux
exigences en matière d'exposition RF.
5150~5250 MHz can be used indoors only.
5150~5250 MHz peut être utilisé à l'intérieur
uniquement.
Notice (Republic of Korea)
제품명 : 특정소출력 무선기기 ( 무선데이터통신시스템용
무선기기 )
제조자및제조국가Anker Innovations Limited
제조년월2022.09
해당 무선설비는 운용 중 전파혼신 가능성이 있음 . 해당
무선설비는 전파혼신 가능성이 있으므로 인명안전과 관련된
서비스는 할수 없음 .
The Bluetooth® word mark and logos are registered
trademarks owned by the Bluetooth SIG, Inc. and any
use of such marks by Anker Innovations Limited is
under license. Other trademarks and trade names are
those of their respective owners.
HDMI, and HDMI logo and High-Definition Multimedia
Interface are trademarks or registered trademarks of
HDMI licensing LLC in the United States and other
countries.
Manufactured under license from Dolby Laboratories.
Dolby, Dolby Audio, and the double-D symbol are
trademarks of Dolby Laboratories Licensing Corporation.
Anker Innovations Limited
Room 1318-19, Hollywood Plaza, 610 Nathan Road,
Mongkok, Kowloon, Hong Kong
RG1 IEC 62471-5:2015
Complies with IEC 60825-1:2014 Class 1 and IEC
62471-5:2015 Risk Group 1
(not included)
5 6 7 84321 109
  • Page 1 1
  • Page 2 2

Anker NEBULA Mode d'emploi

Taper
Mode d'emploi

dans d''autres langues