Harris XL Series Guide d'installation

14221-1850-4000

2

ACKNOWLEDGEMENT

This device is made under license under one or more of the following US patents: 4,590,473; 4,636,791; 5,148,482; 5,185,796;

5,271,017; 5,377,229; 4,716,407; 4,972,460; 5,502,767; 5,146,497; 5,164,986; 5,185,795; 5,226,084; 5,247,579; 5,491,772;

5,517,511; 5,630,011; 5,649,050; 5,701,390; 5,715,365; 5,754,974; 5,826,222; 5,870,405; 6,161,089; and 6,199,037 B1. DVSI

claims certain rights, including patent rights under aforementioned U.S. patents, and under other U.S. and foreign patents and

patents pending. Any use of this software or technology requires a separate written license from DVSI.

CREDITS

Harris, VIDA, OpenSky, MASTR, BeOn, and EDACS are registered trademarks, and TECHNOLOGY TO CONNECT,

INFORM AND PROTECT is a trademark of Harris Corporation.

AMBE is a registered trademark and IMBE, AMBE+, and AMBE+2 are trademarks of Digital Voice Systems, Inc.

Bird is a registered trademark of Bird Electronic Corporation.

Bluetooth is a registered trademark of Bluetooth SIG, Inc.

Microsoft and Windows are registered trademarks of Microsoft Corporation.

All other brand and product names are trademarks, registered trademarks, or service marks of their respective holders.

NOTICE!

The material contained herein is subject to U.S. export approval. No export or re-export is permitted without written

approval from the U.S. Government. Rated: EAR99 in accordance with U.S. Dept. of Commerce regulations 15CFR774,

Export Administration Regulations.

Information and descriptions contained herein are the property of Harris Corporation. Such information and descriptions may

not be copied or reproduced by any means, or disseminated or distributed without the express prior written permission of

Harris Corporation, PSPC Business, 221 Jefferson Ridge Parkway, Lynchburg, VA 24501.

The voice coding technology embodied in this product is protected by intellectual property rights including patent rights,

copyrights, and trade secrets of Digital Voice Systems, Inc. The user of this technology is explicitly prohibited from

attempting to decompile, reverse engineer, or disassemble the Object Code, or in any other way convert the Object Code into

human-readable form.

Repairs to this equipment should be made only by an authorized service technician or facility designated by the supplier. Any

repairs, alterations or substitutions of recommended parts made by the user to this equipment not approved by the

manufacturer could void the user's authority to operate the equipment in addition to the manufacturer's warranty.

This product conforms to the European Union WEEE Directive 2012/19/EU. Do not dispose of this product in a

public landfill. Take it to a recycling center at the end of its life.

Harris products comply with the Restriction of the Use of Certain Hazardous Substances in Electrical and

Electronic Equipment (RoHS) Directive.

This manual is published by Harris Corporation without any warranty. Improvements and changes to this manual necessitated by typographical errors,

inaccuracies of current information, or improvements to programs and/or equipment, may be made by Harris Corporation at any time and without notice.

Such changes will be incorporated into new editions of this manual. No part of this manual may be reproduced or transmitted in any form or by any means,

electronic or mechanical, including photocopying and recording, for any purpose, without the express written permission of Harris Corporation.

14221-1850-4000

3

TABLE OF CONTENTS

Section Page

1 REGULATORY AND SAFETY INFORMATION .................................................................... 7

1.1 SAFETY SYMBOL CONVENTIONS ................................................................................................ 7

1.2 RF ENERGY EXPOSURE AWARENESS AND CONTROL INFORMATION FOR FCC

OCCUPATIONAL USE REQUIREMENTS ....................................................................................... 7

1.3 FEDERAL COMMUNICATIONS COMMISSION REGULATIONS ............................................... 8

1.4 COMPLIANCE WITH RF EXPOSURE STANDARDS ..................................................................... 8

1.4.1 Mobile Antennas .................................................................................................................... 9

1.4.2 Approved Accessories ............................................................................................................ 9

1.4.3 Contact Information ................................................................................................................ 9

1.5 REGULATORY APPROVALS ......................................................................................................... 10

1.5.1 Applicable Type Acceptance/Certification Numbers ........................................................... 10

1.5.2 FCC Part 15 .......................................................................................................................... 10

1.5.3 Industry Canada .................................................................................................................... 10

1.6 OCCUPATIONAL SAFETY GUIDELINES AND SAFETY TRAINING INFORMATION .......... 10

1.7 COMMON HAZARDS ...................................................................................................................... 11

1.8 SAFE DRIVING RECOMMENDATIONS ....................................................................................... 12

1.9 OPERATING RULES AND REGULATIONS .................................................................................. 12

1.10 OPERATING TIPS............................................................................................................................. 13

2 RENSEIGNEMENTS SUR LA RÉGLEMENTATION ET SÉCURITÉ ............................... 14

2.1 CONVENTIONS SUR LES SYMBOLES DE SÉCURITÉ ............................................................... 14

2.2 RENSEIGNEMENTS SUR UNE EXPOSITION À L’ÉNERGIE DES RF ....................................... 14

2.2.1 Renseignements Sur Le Contrôle Et La Sensibilisation À L’énergie Des RF Pour Les

Exigences D’une Utilisation Professionnelle De La FCC .................................................... 14

2.2.2 Règlements de la Federal Communications Commission (« Commission fédérale des

communications » aux États-Unis) ....................................................................................... 15

2.3 CONFORMITÉ AUX NORMES D’EXPOSITION AUX RF ........................................................... 15

2.3.1 Antennes Mobiles ................................................................................................................. 16

2.3.2 Accessoires Approuvés......................................................................................................... 17

2.3.3 Coordonnées ......................................................................................................................... 17

2.4 INTERFÉRENCE DES RADIOFRÉQUENCES ............................................................................... 17

2.4.1 Partie 15 de la FCC ............................................................................................................... 17

2.4.2 Industrie Canada ................................................................................................................... 17

2.5 RENSEIGNEMENTS SUR LA FORMATION SUR LA SANTÉ ET LA SÉCURITÉ AU

TRAVAIL ........................................................................................................................................... 17

3 SPECIFICATIONS ...................................................................................................................... 19

3.1 GENERAL .......................................................................................................................................... 19

3.2 TRANSCEIVER ................................................................................................................................. 20

3.2.1 Transmitter ........................................................................................................................... 20

3.2.2 Receiver ................................................................................................................................ 20

3.2.3 Audio .................................................................................................................................... 20

3.3 ENVIRONMENTAL .......................................................................................................................... 20

4 OPTIONS AND ACCESSORIES ............................................................................................... 22

5 INTRODUCTION ........................................................................................................................ 23

5.1 GENERAL DESCRIPTION ............................................................................................................... 23

5.1.1 Vehicular Communications Hub (VCH) .............................................................................. 23

5.1.2 XL-CH Control Head ........................................................................................................... 24

5.2 RELATED PUBLICATIONS ............................................................................................................ 24

6 INSTALLATION PROCESS ...................................................................................................... 26

6.1 GENERAL INFORMATION ............................................................................................................. 26

14221-1850-4000

4

TABLE OF CONTENTS

Section Page

6.2 PRE-INSTALLATION VEHICLE CHECK ....................................................................................... 27

6.3 PLANNING THE INSTALLATION .................................................................................................. 27

6.3.1 Mounting Location and Considerations ................................................................................ 28

6.3.2 Power Source Location and Considerations ......................................................................... 29

6.3.3 Ignition Sense Location and Considerations ......................................................................... 29

6.3.4 Ground/Return Location and Considerations........................................................................ 31

6.3.5 Antenna Mounting Considerations ....................................................................................... 31

6.3.6 Data, Antenna, and Power Cable Routing Considerations .................................................... 31

6.4 WIRING AND CABLING REQUIREMENTS .................................................................................. 32

6.4.1 Crimping Requirements ........................................................................................................ 32

6.4.2 Splicing Requirements .......................................................................................................... 32

6.4.3 Battery Connection Requirements ........................................................................................ 32

6.5 TOOLS REQUIRED ........................................................................................................................... 33

6.6 UNPACKING AND CHECKING THE EQUIPMENT ..................................................................... 34

6.6.1 Materials ............................................................................................................................... 34

6.6.2 Material Inspection ............................................................................................................... 34

6.6.3 Installation Kits ..................................................................................................................... 35

7 ANTENNA INSTALLATION ..................................................................................................... 37

7.1 ANTENNA MOUNTING LOCATIONS ........................................................................................... 37

7.1.1 Direct Center or Center-Rear of Rooftop .............................................................................. 38

7.1.2 Center of Trunk Lid .............................................................................................................. 38

7.1.3 Rear Deck Lid for Stand-Alone GPS Receive Antenna ........................................................ 38

7.1.4 Installation Precautions ......................................................................................................... 38

7.2 RF ANTENNA INSTALLATION PROCEDURES ........................................................................... 39

7.2.1 Installing Antenna Mounts AN-125001 -002, -004, and -006 .............................................. 39

7.2.2 Installing Magnetic Antenna Mount AN-125001-008 and 12099-0370-01 .......................... 42

7.2.3 Installing All Other Antenna Mounts.................................................................................... 42

7.2.4 Attaching the NMO Antenna Element .................................................................................. 42

7.2.5 Installing the Coax Cable and TNC RF Connector ............................................................... 42

7.2.6 Install GPS Antenna (If Required) ........................................................................................ 43

7.2.7 Installing a GPS Combo Antenna ......................................................................................... 43

7.2.8 Installing a GPS Antenna Inside the Rear-Deck ................................................................... 44

8 FRONT-MOUNT RADIO INSTALLATION ........................................................................... 46

8.1 MOUNTING THE FRONT-MOUNT RADIO ................................................................................... 47

8.1.1 Attaching the Control Head .................................................................................................. 48

8.1.2 Mounting Bracket Installation .............................................................................................. 49

8.1.3 Inserting the Radio into the Mounting Bracket ..................................................................... 51

8.2 FRONT-MOUNT RADIO’S WIRING AND CABLING................................................................... 52

8.2.1 Radio Ground (Black Wire) Connection .............................................................................. 53

8.2.2 Main Power (Red Wire and Main Fuse Holder) Connection ................................................ 54

8.2.3 Ignition Sense (White Wire) Connection .............................................................................. 54

9 REMOTE-MOUNT RADIO INSTALLATION ........................................................................ 57

9.1 MOUNTING THE REMOTE-MOUNT RADIO ............................................................................... 58

9.1.1 Mounting Bracket Installation .............................................................................................. 59

9.1.2 Inserting the Radio into the Mounting Bracket ..................................................................... 61

9.2 REMOTE-MOUNT RADIO’S WIRING AND CABLING ............................................................... 62

9.2.1 Radio Power Ground (Black Wire) Connection ................................................................... 63

9.2.2 Red Wire, Main Fuse Holder Connection (Radio’s Main Power Wire) and Ethernet

Cable ..................................................................................................................................... 64

9.2.3 Radio’s Ignition Sense (White Wire) Connection ................................................................ 66

9.3 CONTROL HEAD INSTALLATION ................................................................................................ 67

14221-1850-4000

5

TABLE OF CONTENTS

Section Page

9.3.1 General Information on the Control Head ............................................................................ 67

9.3.2 Multiple Control Head Radio Installations ........................................................................... 67

9.3.3 Control Head Installation ...................................................................................................... 68

9.3.4 Control Head Power Cable Installation ................................................................................ 71

9.3.5 Ignition Sense (White Wire) Connection.............................................................................. 72

9.3.6 Control Head-to-Radio Ethernet Cable Connections ............................................................ 74

10 OPTIONS AND ACCESSORIES ............................................................................................... 77

10.1 SPEAKER INSTALLATION ............................................................................................................. 77

10.1.1 Front-Mount Radio Installation ............................................................................................ 77

10.1.2 Remote-Mount Radio Installation ........................................................................................ 77

10.2 MICROPHONE ATTACHMENT ...................................................................................................... 78

10.3 GPS NMEA-FORMATTED DATA CONNECTION ........................................................................ 79

11 CABLES AND CONNECTIONS ............................................................................................... 80

11.1 ACCESSORY CABLE 14002-0174-50 ............................................................................................. 80

11.2 SPEAKER CABLE 14002-0174-52 ................................................................................................... 82

11.3 SPEAKER AND USB CABLE 14002-0174-51 ................................................................................. 83

11.4 USB CABLE 14002-0174-55 ............................................................................................................. 84

12 INSTALLATION INSPECTION AND TESTS ........................................................................ 85

12.1 REQUIRED TEST EQUIPMENT ...................................................................................................... 85

12.2 INITIAL POWER-UP TEST .............................................................................................................. 86

12.3 PERFORMANCE TESTS .................................................................................................................. 87

12.3.1 Transmitting into a 50-Ohm Dummy Load - Testing the Radio’s RF Output Power ........... 88

12.3.2 Transmitting into The Mobile Antenna—Testing the Antenna System ............................... 89

12.4 POST INSTALLATION INSPECTION ............................................................................................ 92

13 CARING FOR THE RADIO EQUIPMENT ............................................................................. 93

13.1 PREVENTIVE MAINTENANCE ...................................................................................................... 93

13.2 CLEANING THE RADIO EQUIPMENT .......................................................................................... 93

13.2.1 Light-Duty Cleaning Procedure ............................................................................................ 93

13.2.2 Heavy-Duty Cleaning Procedure .......................................................................................... 94

14 CUSTOMER SERVICE .............................................................................................................. 95

14.1 TECHNICAL SUPPORT ................................................................................................................... 95

14.2 TECH-LINK ....................................................................................................................................... 95

14.3 CUSTOMER CARE ........................................................................................................................... 95

15 INSTALLATION CHECKLIST ................................................................................................ 96

16 WARRANTY REGISTRATION ................................................................................................ 98

LIST OF FIGURES

Page

Figure 5-1: Vehicle Communications Hub (VCH) ............................................................................................... 23

Figure 5-2: VCH Rear View ................................................................................................................................ 24

Figure 5-3: XL-CH Control Head – Front ............................................................................................................ 24

Figure 6-1: High-Level Installation Process ........................................................................................................ 26

Figure 7-1: Antenna Installation Process............................................................................................................. 37

Figure 7-2: Installing Standard ¾-Inch NMO Antenna Mount AN-125001-002 ................................................ 41

Figure 7-3: Installing Thick-Roof NMO Antenna Mount AN-125001-004 ........................................................ 41

Figure 7-4: Crimping Instructions for TNC RF Connector ................................................................................. 43

14221-1850-4000

6

LIST OF FIGURES

Page

Figure 8-1: Front-Mount Equipment Installation Process ................................................................................... 46

Figure 8-2: Front Mount Installation .................................................................................................................... 48

Figure 8-3: Secure XL-CH to VCH ...................................................................................................................... 48

Figure 8-4: VCH Mounting Bracket Kit 14050-6200-01 .................................................................................... 49

Figure 8-5: Install Side Rails in Mounting Bracket .............................................................................................. 50

Figure 8-6: Align Bracket Rail Plates with VCH Rails ....................................................................................... 51

Figure 8-7: Acceptable VCH Positions within Bracket ........................................................................................ 52

Figure 9-1: Remote-Mount Installation Process .................................................................................................. 57

Figure 9-2: VCH Mounting Bracket Kit 14050-6200-01 .................................................................................... 59

Figure 9-3: Install Side Rails in Mounting Bracket .............................................................................................. 60

Figure 9-4: Align Bracket Rail Plates with VCH Rails ....................................................................................... 61

Figure 9-5: Acceptable VCH Positions within Bracket ........................................................................................ 62

Figure 9-6: Wiring Diagram for a Remote-Mount Radio Installation ................................................................. 64

Figure 9-7: XL-CH Rear Panel ............................................................................................................................ 67

Figure 9-8: XL-CH Mounting Bracket Kit 14050-6210-01 .................................................................................. 69

Figure 9-9: Install the XL-CH into the Bracket .................................................................................................... 70

Figure 9-10: Ethernet Connection for a Single Control Head Installation ........................................................... 75

Figure 9-11: Ethernet Connections for Multiple-Control Head Installation ........................................................ 75

Figure 11-1: Accessory Cable 14002-0174-50 ..................................................................................................... 81

Figure 12-1: Wattmeter Connections for Antenna System Tests ........................................................................ 88

LIST OF TABLES

Page

Table 1-1: Recommended Minimum Safe Lateral Distance from a Transmitting Antenna Connected to an

XL Mobile Radio ........................................................................................................................... 9

Tableau 2-1: Distance latérale sécuritaire minimale recommandée d’une antenne de transmission branchée

sur une radio mobile XL .............................................................................................................. 16

Table 3-1: XL Mobile Radio Environmental Specifications ............................................................................... 20

Table 6-1: Installation Kit 14050-6200-01 for Front-Mount XL Mobile Radio .................................................. 35

Table 6-2: Control Head with Installation Components, 14050-6210-01 ............................................................ 35

Table 6-3: Additional Options and Accessories for the XL Mobile Radios ........................................................ 35

Table 6-4: Options and Accessories for the Control Head .................................................................................. 36

Table 7-1: Recommended Antenna Mounting Locations with Antenna Part Numbers ....................................... 39

Table 12-1: Required Test Equipment ................................................................................................................. 85

MANUAL REVISION HISTORY

REV.

DATE

REASON FOR CHANGE

-

Aug/18

Initial release.

Harris Corporation, Public Safety and Professional Communications (PSPC) Business, continually evaluates its technical

publications for completeness, technical accuracy, and organization. You can assist in this process by submitting your

comments and suggestions to the following:

Harris Corporation fax your comments to: 1-434-455-6851

PSPC Business or

Technical Publications e-mail us at: PSPC

_

TechPubs

@

harris.com

221 Jefferson Ridge Parkway

Lynchburg, VA 24501

14221-1850-4000

7

1 REGULATORY AND SAFETY INFORMATION

1.1 SAFETY SYMBOL CONVENTIONS

The following conventions are used in this manual to alert the user to general safety precautions that must

be observed during all phases of operation, installation, service, and repair of this product. Failure to

comply with these precautions or with specific warnings elsewhere violates safety standards of design,

manufacture, and intended use of the product. Harris assumes no liability for the customer's failure to

comply with these standards.

The WARNING symbol calls attention to a procedure, practice, or the like, which,

if not correctly performed or adhered to, could result in personal injury. Do not

proceed beyond a WARNING symbol until the conditions identified are fully

understood or met.

The CAUTION symbol calls attention to an operating procedure, practice, or the like,

which, if not performed correctly or adhered to, could result in damage to the equipment

or severely degrade equipment performance.

The NOTE symbol calls attention to supplemental information, which may improve

system performance or clarify a process or procedure.

1.2 RF ENERGY EXPOSURE AWARENESS AND CONTROL

INFORMATION FOR FCC OCCUPATIONAL USE REQUIREMENTS

Before using the two-way mobile radio, review the following important RF energy awareness and

control information and operational instructions. Comply with this information and instructions to

ensure compliance with RF exposure guidelines.

This radio is intended for use in occupational/controlled conditions, where users

have full knowledge of their exposure and can exercise control over their exposure

to remain below RF exposure limits. This radio is NOT authorized for general

population, consumer, or any other use.

Changes or modifications not expressly approved by Harris could void the user's

authority to operate the equipment.

NOTE

14221-1850-4000

8

This two-way radio uses electromagnetic energy in the radio frequency (RF) spectrum to provide

communications between two or more users over a distance. It uses RF energy or radio waves to send and

receive calls. RF energy is one form of electromagnetic energy. Other forms include, but are not limited

to, electric power, sunlight, and x-rays. RF energy, however, should not be confused with these other

forms of electromagnetic energy, which, when used improperly, can cause biological damage. Very high

levels of x-rays, for example, can damage tissues and genetic material.

Experts in science, engineering, medicine, health, and industry work with organizations to develop

standards for exposure to RF energy. These standards provide recommended levels of RF exposure for

both workers and the general public. These recommended RF exposure levels include substantial margins

of protection. All two-way radios marketed in North America are designed, manufactured, and tested to

ensure they meet government-established RF exposure levels. In addition, manufacturers also recommend

specific operating instructions to users of two-way radios. These instructions are important because they

inform users about RF energy exposure and provide simple procedures on how to control it. Refer to the

following websites for more information on what RF energy exposure is and how to control exposure to

assure compliance with established RF exposure limits:

http://www.fcc.gov/oet/rfsafety/rf-faqs.html

http://www.osha.gov./SLTC/radiofrequencyradiation/index.html

1.3 FEDERAL COMMUNICATIONS COMMISSION REGULATIONS

Before it was marketed in the United States, the XL two-way mobile radio was tested to ensure

compliance with FCC RF energy exposure limits for two-way mobile radios. When two-way radios are

used as a consequence of employment, the FCC requires users to be fully aware of and able to control

their exposure to meet occupational requirements. Exposure awareness can be facilitated using a label

directing users to specific user awareness information. The radio has an RF exposure product label. Also,

this Product Safety Manual and the applicable Operator’s Manual include information and operating

instructions required to control RF exposure and to satisfy compliance requirements.

1.4 COMPLIANCE WITH RF EXPOSURE STANDARDS

The XL Mobile two-way mobile radio is designed and tested to comply with multiple national and

international standards and guidelines regarding human exposure to RF electromagnetic energy. This

radio complies with the IEEE and ICNIRP exposure limits for occupational/controlled RF exposure

environment at duty-cycle times of up to 50% (50% transmit, 50% receive), and it is authorized by the

FCC for occupational use. In terms of measuring RF energy for compliance with the FCC exposure

guidelines, the radio’s antenna radiates measurable RF energy only while it is transmitting (talking), not

when it is receiving (listening), or in a standby mode.

Table 1-1 lists the recommended minimum safe lateral distances for a controlled

environment and for unaware bystanders in an uncontrolled environment, from

transmitting antennas (i.e., monopoles over a ground plane, or dipoles) at rated radio

power for mobile radios installed in a vehicle. Transmit only when unaware bystanders

are at least the uncontrolled recommended minimum safe lateral distance away from

the transmitting antenna.

14221-1850-4000

9

The XL Mobile two-way mobile radio complies with the following RF energy exposure standards and

guidelines:

• United States Federal Communications Commission (FCC), Code of Federal Regulations; 47 CFR

§ 2 sub-part J.

• American National Standards Institute (ANSI)/Institute of Electrical and Electronic Engineers (IEEE)

C95.1-2005.

• Institute of Electrical and Electronic Engineers (IEEE) C95.1-2005.

• IC Standard RSS-102, Issue 5, 2015: Spectrum Management and Telecommunications Radio

Standards Specification. Radio Frequency (RF) Exposure Compliance of Radiocommunication

Apparatus (All Frequency Bands).

Based on the highest radiated RF power and the highest antenna gain in antennas to be used with XL

Mobile, the distances listed are considered as safe distances for controlled and uncontrolled environments

with the XL Mobile radio transmitting at a maximum 50% duty cycle.

1.4.1 Mobile Antennas

The antenna(s) for the radio must be installed in accordance with the antenna installation procedures

presented in the radio’s Installation Manual. Refer to the Section 5.2 on page 23 for the respective

publication number. Installation guidelines presented in the Installation Manuals are limited to metal-

body motor vehicles or vehicles with appropriate ground planes.

Use only approved/supplied antenna(s) or an approved replacement antenna. Unauthorized antennas,

modifications, or attachments can cause the FCC RF exposure limits to be exceeded. Refer to Section 4

for the list of approved antennas.

Table 1-1: Recommended Minimum Safe Lateral Distance from a

Transmitting Antenna Connected to an XL Mobile Radio

TRANSMIT

FREQUENCY

RECOMMENDED MINIMUM LATERAL HUMAN BODY DISTANCE FROM TRANSMITTING

ANTENNA

U.S.

CANADA

CONTROLLED

ENVIRONMENT

UNCONTROLLED

ENVIRONMENT

CONTROLLED

ENVIRONMENT

UNCONTROLLED

ENVIRONMENT

763 – 806 MHz

17 in (43 cm)

37 in (94 cm)

20 in (50 cm)

54 in (137 cm)

806 – 944 MHz

17 in (44 cm)

39 in (99 cm)

20 in (50 cm)

57 in (145 cm)

1.4.2 Approved Accessories

The radio has been tested and meets FCC RF guidelines when used with accessories supplied or

designated for use with it. Use of other accessories may not ensure compliance with the FCC’s RF

exposure guidelines and may violate FCC regulations. For a list of approved accessories, refer to the

Products and Services Catalog.

1.4.3 Contact Information

For additional information on RF exposure and other information, contact Harris using one of the contact

links listed in Section 14 on page 95.

14221-1850-4000

10

1.5 REGULATORY APPROVALS

1.5.1 Applicable Type Acceptance/Certification Numbers

FCC Type Acceptance:

XL-185M: OWDTR-0160-E

Applicable FCC Rules: Part 2, Part 15B, Part 15.247, Part 15.407, Part 24, Part

90 and Part 101

Industry Canada Certification:

XL-185M: 3636B-0160

Applicable Industry Canada Rules: RSS-247, RSS-119, ICES-003 Issue 6

1.5.2 FCC Part 15

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and

2. This device must accept any interference received, including interference that may cause undesired

operation.

1.5.3 Industry Canada

This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the

following two conditions: (1) this device may not cause interference, and (2) this device must accept any

interference, including interference that may cause undesired operation of the device.

Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de

licence. L'exploitation est autorisée aux deux conditions suivantes: (1) l'appareil ne doit pas produire de

brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le

brouillage est susceptible d'en compromettre le fonctionnement.

1.6 OCCUPATIONAL SAFETY GUIDELINES AND SAFETY TRAINING

INFORMATION

To ensure bodily exposure to RF electromagnetic energy is within the FCC allowable limits for

occupational use. Always adhere to the following basic guidelines:

• The push-to-talk button should only be depressed when intending to send a voice message.

• The radio should only be used for necessary work-related communications.

• The radio should only be used by authorized and trained personnel. It should never be operated by

children.

• Do not attempt any unauthorized modification to the radio. Changes or modifications to the radio may

cause harmful interference and/or cause it to exceed FCC RF exposure limits. Only qualified

personnel should service the radio.

• Only use authorized accessories (antennas, Control Heads, speakers/mics, etc.). Use of unauthorized

accessories can cause the FCC RF exposure compliance requirements to be exceeded.

14221-1850-4000

11

The information listed above provides the user with information needed to make him or her aware of a RF

exposure, and what to do to assure that this radio operates within the FCC exposure limits of this radio.

1.7 COMMON HAZARDS

The operator of any mobile radio should be aware of certain hazards common to

the operation of vehicular radio transmissions. Possible hazards include but are

not limited to the following:

• Explosive Atmospheres - Just as it is dangerous to fuel a vehicle while its engine is running, be sure

to turn the radio OFF while fueling the vehicle. If the radio is mounted in the trunk of the vehicle,

DO NOT carry containers of fuel in the trunk.

Areas with potentially explosive atmosphere are often, but not always, clearly marked. Turn the radio

OFF when in any area with a potentially explosive atmosphere. It is rare, but not impossible that the

radio or its accessories could generate sparks.

• Interference To Vehicular Electronic Systems - Electronic fuel injection systems, electronic anti-

skid braking systems, electronic cruise control systems, etc., are typical of the types of electronic

devices that can malfunction due to the lack of protection from radio frequency (RF) energy present

when transmitting. If the vehicle contains such equipment, consult the dealer for the make of vehicle

and enlist his aid in determining if such electronic circuits perform normally when the radio is

transmitting.

• Electric Blasting Caps - To prevent accidental detonation of electric blasting caps, DO NOT use

two-way radios within 1000 feet (305 meters) of blasting operations. Always obey the “Turn Off

Two-Way Radios” (or equivalent) signs posted where electric blasting caps are being used. (OSHA

Standard: 1926.900).

• Radio Frequency Energy - To prevent burns or related physical injury from radio frequency energy,

do not operate the transmitter when anyone outside of the vehicle is within the minimum safe distance

from the antenna as specified in Table 1-1. Refer to Section 1.2 for additional information.

• Vehicles Powered by Liquefied Petroleum (LP) Gas - Radio installation in vehicles powered by

liquefied petroleum gas, where the LP gas container is in the trunk or other sealed-off space within

the interior of the vehicle, must conform to the National Fire Protection Association standard NFPA

58. This requires:

➢ The space containing the radio equipment must be isolated by a seal from the space containing

the LP gas container and its fittings.

➢ Outside filling connections must be used for the LP gas container.

➢ The LP gas container space shall be vented to the outside of the vehicle.

• Vehicles Equipped with Airbags - For driver and passenger safety, avoid mounting the radio’s

Control Head (or any other component) above or near airbag deployment areas. In addition to driver-

side and passenger-side front-impact airbags, some vehicles may also be equipped with side-impact

airbags. For occupant safety, verify the location of all airbags within the vehicle before installing the

radio equipment.

14221-1850-4000

12

1.8 SAFE DRIVING RECOMMENDATIONS

The American Automobile Association (AAA) advocates the following key safe driving recommenda-

tions:

• Read the literature on the safe operation of the radio.

• Keep both hands on the steering wheel and the microphone in its hanger whenever the vehicle is in motion.

• Place calls only when the vehicle is stopped.

• When talking from a moving vehicle is unavoidable, drive in the slower lane. Keep conversations brief.

• If a conversation requires taking notes or complex thought, stop the vehicle in a safe place and

continue the call.

• Whenever using a mobile radio, exercise caution.

1.9 OPERATING RULES AND REGULATIONS

Two-way radio systems must be operated in accordance with the rules and regulations of the local,

regional, or national government.

In the United States, the XL Mobile radio must be operated in accordance with the rules and regulations

of the Federal Communications Commission (FCC). Operators of two-way radio equipment must be

thoroughly familiar with the rules that apply to the radio operation. Following these rules helps eliminate

confusion, assures the most efficient use of the existing radio channels, and results in a smoothly

functioning radio network.

When using a two-way radio, remember these rules:

• It is a violation of FCC rules to interrupt any distress or emergency message. The radio operates in

much the same way as a telephone “party line.” Therefore, always listen to make sure the channel is

clear before transmitting. Emergency calls have priority over all other messages. If someone is

sending an emergency message – such as reporting a fire or asking for help in an accident, do not

transmit unless assistance can be offered.

• The use of profane or obscene language is prohibited by Federal law.

• It is against the law to send false call letters or false distress or emergency messages. The FCC

requires keeping conversations brief and confined to business. Use coded messages whenever

possible to save time.

• Using the radio to send personal messages (except in an emergency) is a violation of FCC rules. Send

only essential messages.

• It is against Federal law to repeat or otherwise make known anything overheard on the radio.

Conversations between others sharing the channel must be regarded as confidential.

• The FCC requires self-identification at certain specific times by means of call letters. Refer to the

rules that apply to the operation for the proper procedure.

• No changes or adjustments shall be made to the equipment except by an authorized or certified

electronics technician.

14221-1850-4000

13

Under U.S. law, operation of an unlicensed radio transmitter within the jurisdiction of

the United States may be punishable by a fine of up to $10,000, imprisonment for up to

two (2) years, or both.

1.10 OPERATING TIPS

The following conditions tend to reduce the effective range of two-way radios and should be avoided

whenever possible:

• Operating the radio in areas of low terrain, or while under power lines or bridges.

• Obstructions such as mountains and buildings.

In areas where transmission or reception is poor, communication improvement may

sometimes be obtained by moving a few yards in another direction or moving to a

higher elevation.

NOTE

14221-1850-4000

14

2 RENSEIGNEMENTS SUR LA RÉGLEMENTATION ET

SÉCURITÉ

2.1 CONVENTIONS SUR LES SYMBOLES DE SÉCURITÉ

Les conventions suivantes sont utilisées dans le présent manuel pour avertir l’utilisateur des précautions

générales de sécurité qui doivent être observées pendant toutes les phases d’opération, d’entretien et de

réparation de ce produit. Le non-respect de ces précautions ou d’avertissements précisés ailleurs enfreint

les normes de sécurité de la conception, de la fabrication et de l’utilisation prévue du produit. Harris

n’assume aucune responsabilité pour le non-respect de ces normes par le client.

Le symbole MISE EN GARDE attire l’attention sur une procédure ou une

pratique qui, si elle n’est pas correctement effectuée ou observée, pourrait

entraîner une blessure personnelle. Ne pas poursuivre au-delà d’un symbole de

MISE EN GARDE avant que les conditions identifiées soient complètement

comprises ou satisfaites.

Le symbole AVERTISSEMENT attire l’attention sur une procédure ou une pratique

opérationnelle qui, si elle n’est pas correctement effectuée ou observée, pourrait

entraîner un bris d’équipement ou une importante baisse de rendement de l’équipement.

Le symbole REMARQUE attire l’attention sur des renseignements supplémentaires qui

peuvent améliorer le rendement du système ou clarifier un processus ou une procédure.

2.2 RENSEIGNEMENTS SUR UNE EXPOSITION À L’ÉNERGIE DES RF

2.2.1 Renseignements Sur Le Contrôle Et La Sensibilisation À L’énergie Des RF

Pour Les Exigences D’une Utilisation Professionnelle De La FCC

Avant d’utiliser les radios mobiles bidirectionnelles, passez en revue les renseignements et les

instructions opérationnelles importants suivants sur le contrôle et la sensibilisation à l’énergie des

RF. Se conformer à ces renseignements et instructions pour assurer la conformité aux directives

d’exposition aux RF.

Cette radio est destinée à être utilisée dans des conditions professionnelles/

contrôlées, où les utilisateurs ont une pleine connaissance de leur exposition et

peuvent exercer un contrôle sur leur exposition pour rester sous les limites

d’exposition aux RF. Cette radio N’est PAS autorisée pour la population générale,

les consommateurs ou toute autre utilisation.

Des changements ou modifications non expressément approuvés par Harris pourraient

annuler le droit d’utilisation de l’équipement pour l’utilisateur.

14221-1850-4000

15

Cette radio bidirectionnelle utilise une énergie électromagnétique dans le spectre des radiofréquences

(RF) pour permettre une communication à distance entre deux utilisateurs ou plus. Elle utilise l’énergie

des RF ou les ondes radio pour envoyer et recevoir des appels. L’énergie des RF est une forme d’énergie

électromagnétique. D’autres formes comprennent, entre autres, l’énergie électrique, la lumière du soleil et

les rayons X. Toutefois, l’énergie des RF ne doit pas être confondue avec ces autres formes d’énergie

électromagnétique qui, lorsque mal utilisées, peuvent causer des dommages biologiques. Par exemple, des

niveaux très élevés de rayons X peuvent endommager les tissus et le matériel génétique.

Des experts en science, en ingénierie, en médecine, en santé et de l’industrie travaillent avec des

organismes pour établir des normes pour l’exposition à l’énergie des RF. Ces normes procurent des

niveaux recommandés d’exposition aux RF autant aux travailleurs qu’au grand public. Ces niveaux

d’exposition aux RF recommandés comprennent d’importantes marges de protection. Toutes les radios

bidirectionnelles commercialisées en Amérique du Nord sont conçues, fabriquées et testées pour s’assurer

qu’elles satisfont les niveaux d’exposition aux RF établis par le gouvernement. Les fabricants

recommandent également des consignes d’utilisation particulières aux utilisateurs de radios

bidirectionnelles. Ces instructions sont importantes, car elles informent les utilisateurs sur l’exposition à

l’énergie des RF et donnent des procédures simples sur la manière de contrôler cette exposition.

Consultez les sites Web suivants (en anglais) pour de plus amples renseignements sur ce qu’est

l’exposition à l’énergie des RF et comment contrôler l’exposition pour assurer la conformité aux limites

d’exposition établies :

http://www.fcc.gov/oet/rfsafety/rf-faqs.html

http://www.osha.gov./SLTC/radiofrequencyradiation/index.html

2.2.2 Règlements de la Federal Communications Commission (« Commission

fédérale des communications » aux États-Unis)

Avant d’être mise sur le marché aux États-Unis, la radio mobile bidirectionnelle XL a été testée pour

s’assurer de sa conformité aux limites d’exposition à l’énergie des RF de la FCC pour les radios mobiles

bidirectionnelles. Lorsque les radios bidirectionnelles sont utilisées à la suite d’une embauche, la FCC

demande aux utilisateurs de bien connaître et de pouvoir contrôler leur exposition pour satisfaire les

exigences professionnelles. La sensibilisation à l’exposition peut être facilitée par l’utilisation d’une

étiquette qui dirige les utilisateurs vers des renseignements particuliers sur la sensibilisation de

l’utilisateur. La radio possède une étiquette de produit sur l’exposition aux RF. De plus, le Manuel sur la

sécurité du produit et le présent Manuel de l’opérateur comprennent des renseignements et les consignes

d’utilisation nécessaires pour contrôler l’exposition aux RF et pour satisfaire les exigences de conformité.

2.3 CONFORMITÉ AUX NORMES D’EXPOSITION AUX RF

La radio mobile bidirectionnelle XL est conçue et testée pour être conforme à un certain nombre de

normes et directives nationales et internationales quant à l’exposition humaine à l’énergie

électromagnétique des RF. Cette radio est conforme aux limites d’exposition de l’IEEE et de la

Commission internationale de protection contre les rayonnements non ionisants pour un environnement

professionnel/contrôlé d’exposition aux RF à des périodes de cycle de service allant jusqu’à 50 % (50 %

de transmission, 50 % de réception) et elle est autorisée par la FCC pour une utilisation professionnelle.

Sur le plan de la mesure de l’énergie des RF pour la conformité aux directives d’exposition de la FCC,

l’antenne de la radio irradie une énergie des RF mesurable seulement lorsqu’elle transmet (parler), et non

lorsqu’elle reçoit (écouter) ou en mode d’attente.

14221-1850-4000

16

Tableau 2-1 indiquent les distances latérales sécuritaires minimales recommandées pour

un environnement contrôlé et pour les spectateurs ignorants dans un environnement non

contrôlé, d’antennes de transmission (c.-à-d., des monopôles sur un plan de sol, ou des

dipôles) à une puissance de radio évaluée pour les radios mobiles installées dans un

véhicule. Ils ne transmettent que lorsque les spectateurs ignorants sont au moins à la

distance latérale sécuritaire minimale recommandée non contrôlée de l’antenne de

transmission.

La radio mobile bidirectionnelle XL est conforme aux normes et directives d’exposition à l’énergie des

RF suivantes :

• Federal Communications Commission (FCC) américaine, le Code of Federal Regulations; 47 CFR

§ 2 sous-partie J.

• American National Standards Institute (ANSI)/Institute of Electrical and Electronic Engineers (IEEE)

C95.1-2005.

• Institute of Electrical and Electronic Engineers (IEEE) C95.1-2005.

• IC Standard RSS-102, numéro 5, 2015: Spectrum Management and Telecommunications Radio

Standards Specification. Radiofrequency Exposure Compliance of Radiocommunication Apparatus

(All Frequency Bands).

Basées sur la puissance des RF irradiées la plus élevée et le gain d’antenne le plus élevé dans les antennes

à utiliser avec le XL, les distances indiquées dans les Tableau 2-1 sont considérées comme des distances

sécuritaires pour des environnements contrôlés et non contrôlés avec la radio mobile XL qui transmet à un

cycle de service maximal de 50%.

Tableau 2-1: Distance latérale sécuritaire minimale recommandée d’une antenne de transmission branchée

sur une radio mobile XL

FRÉQUENCE DE

TRANSMISSION

DISTANCE MINIMALE RECOMMANDÉE DE L’ANTENNE DE TRANSMISSION POUR LE CORPS

HUMAIN

U.S.

CANADA

ENVIRONNEMENT

CONTRÔLÉ

ENVIRONNEMENT

NON CONTRÔLÉ

ENVIRONNEMENT

CONTRÔLÉ

ENVIRONNEMENT

NON CONTRÔLÉ

763 – 806 MHz

17 po (43 cm)

37 po (94 cm)

20 po (50 cm)

54 po (137 cm)

806 – 944 MHz

17 po (44 cm)

39 po (99 cm)

20 po (50 cm)

57f po (145 cm)

2.3.1 Antennes Mobiles

Les antennes pour la radio doivent être installées conformément aux procédures présentées dans le

Manuel sur la sécurité du produit et dans le Manuel d’installation. L’installation est limitée à un ou des

véhicules motorisés en métal avec des plans au sol appropriés.

Utilisez uniquement les antennes approuvées/fournies ou une antenne de remplacement approuvée (voir la

Section 4). Des antennes, des modifications ou des accessoires non autorisés peuvent causer un

dépassement des limites d’exposition aux RF de la FCC.

14221-1850-4000

17

2.3.2 Accessoires Approuvés

La radio a été testée et satisfait les directives de RF de la FCC lorsqu’elle est utilisée avec les accessoires

fournis ou conçus pour être utilisés avec elle. L’utilisation d’autres accessoires peut ne pas garantir la

conformité aux directives d’exposition de la FCC et peut enfreindre la réglementation de la FCC. Pour

une liste d’accessoires approuvés, consultez le Manuel d’installation ou le Catalogue de produits et

services de Harris.

Utilisez toujours des accessoires autorisés Harris (antennes, haut-parleurs/micros,

etc.). L’utilisation d’accessoires non autorisés peut entraîner un dépassement des

exigences de conformité pour une exposition aux RF professionnelle ou contrôlée

de la FCC.

2.3.3 Coordonnées

Pour de plus amples renseignements sur l’exposition aux RF ou d’autres renseignements, contactez Harris

en utilisant l’un des liens apparaissant à la Section 14.

2.4 INTERFÉRENCE DES RADIOFRÉQUENCES

2.4.1 Partie 15 de la FCC

Cet appareil est conforme à la Partie 15 de la réglementation de la FCC. Le fonctionnement est soumis

aux deux conditions suivantes :

1. Cet appareil ne doit pas causer une interférence nuisible; et

2. Cet appareil doit accepter toute interférence reçue, y compris une interférence qui peut causer un

fonctionnement non souhaité.

2.4.2 Industrie Canada

Cet appareil est conforme aux normes RSS exemptées de licence d’Industrie Canada. Le fonctionnement

est soumis aux deux conditions suivantes : (1) cet appareil ne doit pas causer d’interférence et (2) cet

appareil doit accepter toute interférence, y compris une interférence qui peut causer un fonctionnement

non souhaité de l’appareil.

2.5 RENSEIGNEMENTS SUR LA FORMATION SUR LA SANTÉ ET LA

SÉCURITÉ AU TRAVAIL

S’assurer que l’exposition physique à l’énergie électromagnétique des RF se situe dans les limites

acceptables de la FCC pour l’utilisation professionnelle. Toujours se conformer aux directives de base

suivantes :

• Le bouton de microphone doit être abaissé seulement lorsque l’on souhaite envoyer un message

vocal.

• La radio doit être utilisée seulement pour les communications nécessaires liées au travail.

• La radio doit être utilisée seulement par du personnel autorisé et formé. Elle ne doit jamais être

utilisée par des enfants.

• Ne tentez pas d’apporter une modification non autorisée à la radio. Des changements ou des

modifications à la radio peuvent causer une interférence nocive ou entraîner un dépassement des

limites d’exposition aux RF de la FCC. Seul le personnel qualifié doit utiliser la radio.

14221-1850-4000

18

• Utilisez toujours seulement des accessoires autorisés (antennes, haut-parleurs/micros, etc.).

L’utilisation d’accessoires non autorisés peut entraîner un dépassement des exigences de conformité

pour une exposition aux RF de la FCC.

Les renseignements donnés ci-dessus donnent à l’utilisateur les renseignements nécessaires pour le

sensibiliser à l’exposition aux RF et sur ce qu’il faut faire pour s’assurer que cette radio fonctionne dans

les limites d’exposition de la FCC de cette radio.

14221-1850-4000

19

3 SPECIFICATIONS

1

3.1 GENERAL

Dimensions: Height x Width x Depth (See footnote

2

):

Front-Mount Radio with XL-CH: 2.4 x 6.9 x 12.8 in (60 x 175 x 325 mm)

Remote-Mount Radio: 2.0 x 6.9 x 9.7 in (50 x 175 x 247 mm)

Weight (See footnote

3

):

Front-Mount Radio with XL-CH: 9.0 lbs. (4.08 kg)

Remote-Mount Radio: 7.5 lbs. (3.4 kg)

Operating Ambient Temperature Range:

The Vehicle Communications Hub (VCH) runs at elevated temperatures that can be up

to 45°F above ambient.

Operating: -22°F to 140°F (-30°C to +60°C)

In Transit: -40°F to 176°F (-40°C to +80°C)

DC Supply Voltage Operating Ranges:

For Full Performance: 13.6 V

Overall Operating Range: 10.8 to 16.6 V

DC Supply Current Requirements:

Receive (includes Control Head)

With 15-Watt Speaker Output Power: 2 A

Transmit (includes Control Head):

At 35 Watts RF: 10 A

Quiescent/Off Currents

Mobile Radio Only: 280 mA

XL-CH Control Head Only: 175 mA

1

These specifications are primarily intended for the use of the installation technician. See the appropriate Specifications

Sheet for the complete specifications.

2

Dimensions do not include space required for mounting brackets, cables, clearance/access, etc.

3

Weights do not include respective mounting brackets, cables, etc.

14221-1850-4000

20

3.2 TRANSCEIVER

Frequency Ranges

700 MHz Band (INT): 763 to 776 MHz, 793 to 806 MHz

700 MHz Band (NA): 769 to 775 MHz, 799 to 805 MHz

800 MHz Band (INT): 806 to 825 MHz, 851 to 870 MHz

800 MHz Band (NA): 806 to 816 MHz, 851 to 861 MHz

900 MHz Band (INT): 896 to 902 MHz, 935 to 944 MHz

900 MHz Band (NA): 896 to 901 MHz, 935 to 944 MHz

3.2.1 Transmitter

Power Ranges:

700 MHz Band: 30 W

800 MHz Band: 35 W

900 MHz Band: 35 W

3.2.2 Receiver

Sensitivity at 12 dB SINAD: -119 dBm (all bands)

Sensitivity at 5% BER (P25 Sensitivity): -119 dBm (all bands)

3.2.3 Audio

Microphone Input Sensitivity: dBspl provides 60% SRD (typical), which is

equivalent to 82mV

Microphone Connector: USB-C for the USB microphone; DB9 for analog

microphone using accessory cable.

Microphone Types Available: USB-C and Desk Microphone

External Speaker Connection Standard XL-200M Speaker

3.3 ENVIRONMENTAL

The XL Mobile radio and the Control Head meet the following environmental specifications:

Table 3-1: XL Mobile Radio Environmental Specifications

DESCRIPTION

APPLICABLE

STANDARD

METHOD OR

SECTION

PROCEDURE

Low Pressure

MIL-STD-810G

500.5

I & II

High Temperature

+60C Operating

+80C Storage

MIL-STD-810G

501.5

I & II

Low Temperature

-30C Operating

-57ºC Storage

MIL-STD-810G

502.5

I & II

La page charge ...

Harris XL Series Guide d'installation

Ce manuel convient également à

Harris XL Series Guide d'installation

dans d''autres langues

Documents connexes

Autres documents