AT&T DECT 6.0 Cordless Telephone [DLP73210, DLP73410, DLP73440, DLP73510, DLP73540] Manuel utilisateur

Marque: AT&T

Modèle: DECT 6.0 Cordless Telephone [DLP73210, DLP73410, DLP73440, DLP73510, DLP73540]

Catégorie: Téléphones

Taper: Manuel utilisateur

Ce manuel convient également à

Quick start guide

DLP73210/DLP73410/DLP73440/

DLP73510/DLP73540

DECT 6.0 cordless telephone/

answering system with

BLUETOOTH® wireless technology

Congratulations

on your purchase of this AT&T product. Before using this AT&T product, please read

the Important safety information section on pages 1-3 of this manual.

Both the model and serial numbers of your AT&T product can be found on the

bottom of the telephone base. Save your sales receipt and original packaging in

case it is necessary to return your telephone for warranty service.

For customer service, please visit our website at https://telephones.att.com

or call 1 (800) 222-3111. In Canada, dial 1 (866) 288-4268.

Parts checklist

Your telephone package contains the following items.

Telephone line cord

Power adapter for

telephone base

Telephone baseQuick start guide

Wall-mount bracket

THIS SIDE UP / CE CÔTÉ VERS LE HAUT

Battery Pack / Bloc-piles :

BT162342/BT262342 (2.4V 300mAh Ni-MH)

WARNING / AVERTISSEMENT :

DO NOT BURN OR PUNCTURE BATTERIES.

NE PAS INCINÉRER OU PERCER LES PILES.

Made in China / Fabriqué en chine GP1621

Cordless handset

(2 for DLP73210)

(4 for DLP73410/

DLP73440)

(5 for DLP73510/

DLP73540)

Charger for cordless

handset with power

adapter installed

(1 for DLP73210)

(3 for DLP73410/

DLP73440)

(4 for DLP73510/

DLP73540)

Battery for cordless

handset

(2 for DLP73210)

(4 for DLP73410/

DLP73440)

(5 for DLP73510/

DLP73540)

Battery

compartment cover

(2 for DLP73210)

(4 for DLP73410/

DLP73440)

(5 for DLP73510/

DLP73540)

Quick start guide

DLP73210/DLP73410/DLP73440/

DLP73510/DLP73540

DECT 6.0 cordless telephone/

answering system with

BLUETOOTH® wireless technology

Smart call blocker

leaet

Please refer to the online DLP73210/DLP73410/DLP73440/DLP73510/

DLP73540 DECT 6.0 cordless telephone/answering system with

BLUETOOTH® wireless technology Complete user’s manual for a full set

of installation and operation instructions at

www.telephones.att.com/manuals.

Important safety information

This symbol is to alert you to important operating or servicing instructions

that may appear in this user’s manual. Always follow basic safety precautions

when using this product to reduce the risk of injury, re, or electric shock.

Safety information

f Read and understand all instructions in the user’s manual. Observe all markings on

the product.

f Avoid using a telephone during a thunderstorm. There may be a slight chance of

electric shock from lightning.

f Do not use a telephone in the vicinity of a gas leak. Under certain circumstances,

a spark may be created when the adapter is plugged into the power outlet, or

when the handset is replaced in its cradle. This is a common event associated with

the closing of any electrical circuit. In an inadequately ventilated environment,

the user should not plug the phone into a power outlet, nor put a charged

handset into the cradle where there are concentrations of ammable or ame-

supporting gases. A spark in such an environment could create a re or explosion.

Such environments might include: medical use of oxygen without adequate

ventilation; industrial gases (cleaning solvents; gasoline vapors; etc.); a leak of natural

gas; etc.

f Do not use this product near water or when you are wet. For example, do not use

it in a wet basement or shower, nor next to a swimming pool, bathtub, kitchen sink

and laundry tub. Do not use liquids or aerosol sprays for cleaning. If the product

comes in contact with any liquid, unplug any line or power cord immediately. Do not

plug the product back in until it has dried thoroughly.

f Install this product in a protected location where no one can trip over any line or

power cords. Protect cords from damage or abrasion.

f If this product does not operate normally, see the Troubleshooting section of the

online Complete user’s manual. If you cannot solve the problem, or if the product

is damaged, refer to the Limited warranty section (pages 33 - 35). Do not

open this product except as directed in your user’s manual. Opening the product or

reassembling it incorrectly may expose you to hazardous voltages or other risks.

f Replace batteries, only as described in your user’s manual (Page 5). Do not burn

or puncture batteries — they contain caustic chemicals.

f This power adapter is intended to be correctly oriented in a vertical or oor mount

position. The prongs are not designed to hold the plug in place if it is plugged into a

ceiling or an under-the-table/cabinet outlet.

f For pluggable equipment, the socket-outlet shall be installed near the equipment

and shall be easily accessible.

Important safety information

CAUTIONS:

f Use only the power adapter provided with this product. To obtain a replacement,

visit our website at https://telephones.att.com or call

1 (800) 222-3111. In Canada, dial 1 (866) 288-4268.

f U

se only the supplied rechargeable battery or replacement battery (model

BT162342/

BT262342).

To order, visit our website at

https://telephones.att.com, or call 1 (800) 222-3111. In

Canada, dial 1 (866) 288-4268.

CAUTION: To prevent risk of re or battery explosion, replace with

the correct battery type. Dispose of used batteries according to the

instructions.

Especially about cordless telephones

f Privacy: The same features that make a cordless telephone convenient create

some limitations. Telephone calls are transmitted between the telephone base

and the handset by radio waves, so there is a possibility that your cordless

telephone conversations could be intercepted by radio receiving equipment within

range of the cordless handset. For this reason, you should not think of cordless

telephone conversations as being as private as those on corded telephones.

f Electrical power: The telephone base of this cordless telephone must be

connected to a working electrical outlet which is not controlled by a wall switch.

Calls cannot be made from the handset if the telephone base is unplugged,

switched o or if the electrical power is interrupted.

f Potential TV interference: Some cordless telephones operate at frequencies

that may cause interference to TVs and VCRs. To minimize or prevent such

interference, do not place the telephone base of the cordless telephone near

or on top of a TV or VCR. If interference is experienced, moving the cordless

telephone farther away from the TV or VCR will oen reduce or eliminate the

interference.

f Rechargeable batteries: This product contains nickel-metal hydride rechargeable

batteries. Exercise care in handling batteries in order not to create a short

circuit with conductive material such as rings, bracelets, and keys. The battery or

conductor may overheat and cause harm. Observe proper polarity between the

battery and the battery charger.

f Nickel-metal hydride rechargeable batteries: Dispose of these batteries in a safe

manner. Do not burn or puncture. Like other batteries of this type, if burned or

punctured, they could release caustic material which could cause injury.

The RBRC Seal means that the manufacturer is voluntarily

participating in an industry program to collect and recycle nickel-

metal hydride rechargeable batteries when taken out of service

within the United States. These batteries may be taken to a

participating local retailer of replacement batteries or recycling

center. You may call 1-800-8-BATTERY® for locations accepting

spent Ni-MH batteries.

The RBRC Seal and 1-800-8-BATTERY® are registered trademarks of

Call2recycle, Inc.

Precautions for users of implanted cardiac pacemakers

Cardiac pacemakers (applies only to digital cordless telephones):

Wireless Technology Research, LLC (WTR), an independent research entity, led

a multidisciplinary evaluation of the interference between portable wireless

telephones and implanted cardiac pacemakers. Supported by the U.S. Food and

Drug Administration, WTR recommends to physicians that:

Pacemaker patients:

f Should keep wireless telephones at least six inches from the pacemaker.

f Should NOT place wireless telephones directly over the pacemaker, such as in a

breast pocket, when it is turned ON.

f Should use the wireless telephone at the ear opposite the pacemaker.

WTR’s evaluation did not identify any risk to bystanders with pacemakers from

other persons using wireless telephones.

ECO mode

This power conserving technology reduces power consumption for optimal battery

performance. The ECO mode activates automatically whenever the handset is

synchronized with the telephone base.

Especially about telephone answering systems

Two-way recording: This unit does not sound warning beeps to inform the other

party that the call is being recorded. To ensure that you are in compliance with any

federal or state regulations regarding recording a telephone call, you should start

the recording process and then inform the other party that you are recording the

conversation.

SAVE THESE INSTRUCTIONS

Important safety information

Install

Telephone base

Notes:

f Plug one end of the telephone line cord into a telephone jack or a DSL lter.

f If you have DSL high-speed Internet service, a DSL lter (not included) is required.

Charger

Caution: Use only the power adapter(s)

provided with this product. To obtain a

replacement, visit our website at

https://telephones.att.com

or call 1 (800) 222-3111. In Canada,

dial 1 (866) 288-4268.

THIS SIDE UP / CE CÔTÉ VERS LE HAUT

Battery Pack / Bloc-piles :

BT183342/BT283342 (2.4V 400mAh Ni-MH)

WARNING / AVERTISSEMENT :

DO NOT BURN OR PUNCTURE BATTERIES.

NE PAS INCINÉRER OU PERCER LES PILES.

Made in China / Fabriqué en chine CR1535

THIS SIDE UP

THIS SIDE UP / CE CÔTÉ VERS LE HAUT

Battery Pack / Bloc-piles :

BT183342/BT

28334

2 (2.4V 400mAh Ni-MH)

WARNING / AVERTISSEMENT :

DO NOT BURN OR PUNCTURE BATTERIES.

NE PAS INCINÉRER OU PERCER LES PILES.

Made in China / Fabriqué en chine CR1535

Battery

Install the battery, as shown below.

Caution: Use only the supplied rechargeable battery or replacement battery

(model BT162342/BT262342).

Install

Charge your handset(s) before initial use. The battery is fully charged aer 11

hours of continuous charging. The CHARGE light on the top of the handset is on

during charging.

Handset overview

Handset

CHARGE light Ì On when the handset is charging in the telephone

base or charger.

VOL p DIR

Ì Press p DIR to show directory entries when the

handset is not in use.

Ì Press to scroll up while in menus.

Ì While entering names or numbers, press to move the

cursor to the right.

Ì Press to increase the listening volume when on a call,

or to increase the message playback volume.

VOL q CID

Ì Press q CID to show caller ID log when the handset is

not in use.

Ì Press to scroll down while in menus.

Ì While entering names or numbers, press to move the

cursor to the le.

Ì Press to decrease the listening volume when on a call,

or to decrease the message playback volume.

CELL

Ì Press to make or answer a cell call.

Ì During a cell call, press to answer an incoming cell call

when you hear a call waiting alert.

Ì During message playback, press to call back the caller

if the caller’s number is available.

HOME/

FLASH

Ì Press to make or answer a home call.

Ì During a call, press to answer an incoming home call

when you receive a call waiting alert.

Ì During message playback, press to call back the caller

if the caller’s number is available.

Ì While reviewing a caller ID log entry, press repeatedly

to add or remove 1 in front of the telephone number

before dialing or saving it in the directory.

Ì Press and hold to set or to dial your voicemail number.

TONE

/a>A

Ì Press to switch to tone dialing temporarily during a call

if you have pulse service.

Ì While entering names, press to change the next letter

to upper or lower case.

/SPEAKER

Ì Press to make or answer a home or cell call using the

speakerphone.

Ì Press to switch between the speakerphone and the

handset.

MUTE/

DELETE/

VOICE

Ì During a call, press to mute the microphone.

Ì When the handset is ringing, press to mute the ringer

temporarily.

Ì While reviewing the caller ID log, the directory or the

redial memory, press to delete an individual entry.

Ì While predialing, press to delete digits.

Ì During message or announcement playback, press

to delete the playing message or the recorded

announcement.

Ì When the handset is not in use, press to activate the

voice-controlled application of connected cell phone.

MENU/

SELECT

Ì When the handset is not in use, press to show the menu.

Ì While in the menu, press to select an item or save an

entry or setting.

CALL BLOCK Ì Press to block the incoming call when the telephone is

ringing.

Ì When on a call, press to block the call.

Ì When the handset is not in use, press to show the call

block menu.

OFF/

CANCEL

Ì During a call, press to hang up.

Ì While in a menu, press to cancel an operation, back

up to the previous menu, or exit the menu display; or

press and hold this button to exit to idle mode.

Ì When the handset is ringing, press to mute the ringer

temporarily.

Ì Press and hold while the telephone is not in use to

erase the missed call indicator.

Handset overview

QUIET#

(pound key)

Ì Press repeatedly to display other dialing options when

reviewing a caller ID log entry.

Ì Press and hold to enter the QUIET mode setting

screen, or to deactivate QUIET mode.

PTT (PUSH

TO TALK)

Ì Press to initiate a one-to-one or one-to-group

broadcast.

Ì Press and hold to broadcast to a group of system

devices.

REDIAL/

PAUSE

Ì Press repeatedly to view the last 10 numbers dialed.

Ì While entering numbers, press and hold to insert a

dialing pause.

Telephone base

REDIAL/PAUSE Ì Press repeatedly to view the last 10 numbers

dialed.

Ì While entering numbers, press and hold to insert a

dialing pause.

VOL

Ì Press to adjust the volume during message

playback.

Ì Press to adjust the listening volume during a call.

Ì When the phone is not in use, press to adjust the

telephone base ringer volume for all lines.

MUTE/VOICE Ì During a call, press to mute the microphone.

Ì While the telephone base is ringing, press to

silence the ringer temporarily.

Ì When the telephone is not in use, press to activate

the voice-controlled application of connected cell

phone.

Handset / Telephone base overview

Ì While reviewing a caller ID log entry, press

repeatedly to add or remove 1 in front of the

telephone number before dialing or saving it in

the directory.

Ì Press and hold to set or to dial your voicemail

number.

TONE

/a>A

Ì Press to switch to tone dialing temporarily during

a call if you have pulse service.

Ì While entering names, press to change the next

letter to upper or lower case.

QUIET#

(pound key)

Ì Press repeatedly to display other dialing options

when reviewing a caller ID log entry.

Ì Press and hold to enter the QUIET mode setting

screen, or to deactivate QUIET mode.

/ANS ON

Ì Press to turn the answering system on or o.

/FIND HS

Ì Press the button to page all system handsets.

Antenna

X/DELETE Ì Press to delete the message currently playing.

Ì When the phone is not in use, press twice to

delete all previously reviewed messages.

Ì While reviewing the redial list, directory, caller ID

log, allow list, block list, or star name list, press to

delete an individual entry.

Ì While entering names or numbers, press to delete

a digit or a character.

Ì While predialing, press to delete a digits.

/REPEAT Ì Press to repeat a message or press twice to play

the previous message.

/SKIP Ì During message playback, press to skip to the

next message.

/PLAY/

STOP

Ì Press to play messages.

Ì Press to stop message playback.

INT Ì Press to initiate an intercom conversation or

transfer a call.

HOME

Ì Press to make or answer a home call.

Ì Flashes quickly when there is an incoming home

call.

Ì Flashes slowly when a home call is on hold.

Telephone base overview

CELL

Ì Press to make or answer a cell call.

Ì Flashes quickly when there is an incoming cell call.

Ì Flashes slowly when a cell call is on hold.

CALL BLOCK Ì Press to block the incoming call when the

telephone is ringing.

Ì When on a call, press to block the call.

Ì When the telephone base is not in use, press to

show the call block menu.

CELL 1 Light Ì On when the telephone is paired and connected

with a Bluetooth device.

Ì Flashes alternately while pairing a Bluetooth

device.

CELL 2/

Headset Light

Ì On when the telephone is paired and connected

with a Bluetooth device or headset.

Ì Flashes alternately while pairing a Bluetooth

device or headset.

CANCEL Ì While in a menu, press to exit without making

changes or press and hold to return to idle mode.

Ì Press and hold while the telephone is not in use to

erase the missed call indicator.

qCID

Ì Press to scroll down while in a menu.

Ì Press to review the caller ID log when the

telephone is not in use.

Ì While entering names or numbers, press to move

the cursor to the le.

MENU/SELECT Ì When the telephone base is not in use, press to

show the menu.

Ì While in the menu, press to conrm or save an

entry or setting.

pDIR

Ì Press to scroll up while in a menu.

Ì Press to show directory entries when the

telephone is not in use.

Ì While entering names or numbers, press to move

the cursor to the right.

PTT/FLASH Ì Press to display the PTT menu to begin a PTT call.

Ì Press and hold to begin a one-to-group broadcast

when the telephone base is not in use.

Ì During a call, press to answer an incoming home

call when you receive a call waiting alert.

Telephone base overview

Initial basic settings

Aer you install your telephone or power returns following a power outage, the

handset and telephone base will prompt you to set the date and time. To skip

setting the date and time, press OFF/CANCEL on the handset or press CANCEL

on the telephone base.

Voice guide to set Smart call blocker and

answering system

Aer the date and time setting is done or skipped, the telephone base will prompt

if you want to set Smart call blocker. Press MENU/SELECT to start the Smart

call blocker setup via voice guide. To skip the setup, press CANCEL twice on the

telephone base.

Aer the Smart call blocker setting is done or skipped, the telephone base will then

prompt if you want to set up the answering system. Press MENU/SELECT to start

the answering system setup via voice guide. To skip the setup, press CANCEL on the

telephone base.

We recommend you program your telephone system before use. The following

are a few examples of common features to set before using the telephone. Refer to

the Handset and telephone base settings and Answering system settings in the

Complete user’s manual for detailed instructions on setting all telephone features.

Date and time

Note: Set the date/time before using the answering system.

Using a cordless handset or the telephone base:

1. MENU -> / -> Set date/time -> SELECT.

2. Enter the month (MM), day (DD) and year (YY) -> SELECT.

3. Enter the hour (HH) and minute (MM).

4. / -> AM or PM -> SELECT.

Smart call blocker setup via voice guide

You can follow the voice guide to set up Smart call blocker.

Using the telephone base:

1. CALL BLOCK.

2. / -> Voice guide -> SELECT.

3. Press 1 if you want to screen home calls with telephone numbers that are not

saved in your Directory, Allow list, or Star name list; or Press 2 if you do not want

to screen calls, and want to allow all incoming calls to get through.

Basic answering system setup via voice guide

You can follow the voice guide to record your own announcement, set the number

of rings and set the message alert tone.

Using the telephone base:

1. Press MENU twice.

2. / -> Voice guide -> SELECT.

3. Set up the answering system by inputting the designated numbers, as

instructed.

Add a Bluetooth

cell phone/headset

Note: Your DLP73210/DLP73410/DLP73440/DLP73510/DLP73540 is compatible with Bluetooth

version 2.0 or above devices.

To use a Bluetooth enabled cellular phone or headset with your telephone, you

must rst pair and connect your Bluetooth cellular phone or headset with the

telephone base.

Bluetooth wireless technology operates within a short range (up to 30 feet). Keep

the connected device within 15 feet of the telephone base for optimal performance.

To pair and connect a cell phone using the telephone base:

1. MENU -> / -> Bluetooth -> SELECT.

2. SELECT to select Add cellular.

3. Press SELECT again to turn on the telephone base discoverable mode.

4. Place the cell phone next to the telephone base. Turn on the Bluetooth feature

of your cell phone and search for or add new advices. Once your cell phone nds

your AT&T phone (AT&T DECT 6.0), press the appropriate key on your cell phone

to continue the pairing process.

To pair and connect a headset using the telephone base:

1. MENU -> / -> Bluetooth -> SELECT.

2. / -> Add headset -> SELECT.

3. Set your headset to discoverable mode -> Press SELECT.

Record your own announcement

Your outgoing announcement plays when calls are answered by the answering

system. You can use the preset announcement to answer calls, or replace it with

your own recorded announcement.

Initial basic settings

Using a cordless handset:

1. MENU -> / -> Answering sys -> SELECT.

2. SELECT to select Announcement.

3. Press 7 to record.

4. Speak towards the handset to record your announcement and press 5 to end

recording and save it.

Using the telephone base:

1. Press MENU twice.

2. SELECT to select Announcement.

3. SELECT to select Record annc.

4. Speak towards the handset or the telephone base to record your announcement

and press 5 to end recording and save it.

Number of rings

You can set the answering system to answer an incoming call aer 2, 3, 4, 5, or 6

rings. You can also select toll saver. If you choose toll saver, the answering system

answers a call aer two rings when you have new messages, or aer four rings

when there are no new messages. This enables you to check for new messages and

avoid paying unnecessary long distance charges if you are calling from out of your

local area.

Using a cordless handset or the telephone base:

1. MENU -> / -> Answering sys -> SELECT.

2. / -> Ans sys setup -> SELECT.

3. / -> # of rings -> SELECT.

4. / to choose among 2, 3, 4, 5, 6, or Toll saver -> SELECT.

Ringer volume

You can set the ringer volume level to one of the six levels, or turn the ringer o, for

incoming home or cell calls.

Using a cordless handset or the telephone base:

Set ringer volume for incoming home calls:

1. MENU -> / -> Ringers -> SELECT.

2. SELECT to select Home volume.

3. / to choose the desire level -> SELECT.

Set ringer volume for incoming cell calls:

1. MENU -> / -> Ringers -> SELECT.

2. / to to select Cell volume -> SELECT.

3. / to choose the desire level -> SELECT.

Initial basic settings

Operate

Operation Steps

Making a home or

cell call

Using a cordless handset:

f Press HOME/FLASH or /SPEAKER -> Enter the

telephone number.

f Press CELL -> Enter the telephone number -> SELECT.

Using the telephone base:

f Press /HOME -> Enter the telephone number.

f Press /CELL -> Enter the telephone number -> SELECT.

On-hook dialing

(predialing)

Using a cordless handset:

Enter the telephone number ->

Press HOME/FLASH, CELL or /SPEAKER to call.

Using the telephone base:

Enter the telephone number -> Press /HOME or /CELL

to call.

LCD language

Using a cordless handset or the telephone base:

1. MENU -> / -> Settings -> SELECT.

2. SELECT again to select LCD language.

3. / to choose English, Français or Español -> SELECT.

Note: If you accidentally change the LCD language to French or Spanish, you can reset it back

to English without going through the French or Spanish menus.

f Press MENU on the handset in idle mode -> enter *364#; or

f Press MENU on the base in idle mode -> enter 364#.

Initial basic settings

Operation Steps

Answering a home

or cell call

Using a cordless handset:

Press HOME/FLASH, CELL or /SPEAKER, or press

any dialing keys (0-9 or TONE ).

Using the telephone base:

Press /HOME, /CELL or press any dialing keys (0-9 or

TONE ).

Ending a call Using a cordless handset:

Press OFF/CANCEL or return the handset to the

telephone base or charger.

Using the telephone base:

Press /HOME or /CELL.

Handset

speakerphone

During a call, press /SPEAKER to switch between

handsfree speakerphone and normal handset use.

Redial Using a cordless handset:

Press REDIAL repeatedly to select the desired entry ->

HOME/FLASH, CELL or /SPEAKER to call.

Using the telephone base:

Press REDIAL/PAUSE repeatedly to select the desired entry

-> /HOME or /CELL to call.

Volume control Using a cordless handset or the telephone base:

Press VOL q to decrease or press VOL p to increase the

listening volume during a call.

Call waiting

(Requires

subscription from

telephone)

Press HOME/FLASH on the handset or PTT/FLASH on

the telephone base to put current call on hold and to take

the new call.

Operate

AT&T DECT 6.0 Cordless Telephone [DLP73210, DLP73410, DLP73440, DLP73510, DLP73540] Manuel utilisateur

Marque: AT&T

Modèle: DECT 6.0 Cordless Telephone [DLP73210, DLP73410, DLP73440, DLP73510, DLP73540]

Catégorie: Téléphones

Taper: Manuel utilisateur

Ce manuel convient également à

Télécharger le PDF

rapport

dans d''autres langues

English: AT&T DECT 6.0 Cordless Telephone [DLP73210, DLP73410, DLP73440, DLP73510, DLP73540] User manual

AT&T DECT 6.0 Cordless Telephone [DLP73210, DLP73410, DLP73440, DLP73510, DLP73540] Manuel utilisateur

Ce manuel convient également à

AT&T DECT 6.0 Cordless Telephone [DLP73210, DLP73410, DLP73440, DLP73510, DLP73540] Manuel utilisateur

dans d''autres langues

Documents connexes

Autres documents