AT&T DLP73510 Manuel utilisateur

Catégorie
Téléphones
Taper
Manuel utilisateur
Quick start guide
DLP73210/DLP73410/DLP73440/
DLP73510/DLP73540
DECT 6.0 cordless telephone/
answering system with
BLUETOOTH® wireless technology
Congratulations
on your purchase of this AT&T product. Before using this AT&T product, please read
the Important safety information section on pages 1-3 of this manual.
Both the model and serial numbers of your AT&T product can be found on the
bottom of the telephone base. Save your sales receipt and original packaging in
case it is necessary to return your telephone for warranty service.
For customer service, please visit our website at https://telephones.att.com
or call 1 (800) 222-3111. In Canada, dial 1 (866) 288-4268.
Parts checklist
Your telephone package contains the following items.
Telephone line cord
Power adapter for
telephone base
Telephone baseQuick start guide
Wall-mount bracket
THIS SIDE UP / CE CÔTÉ VERS LE HAUT
Battery Pack / Bloc-piles :
BT162342/BT262342 (2.4V 300mAh Ni-MH)
WARNING / AVERTISSEMENT :
DO NOT BURN OR PUNCTURE BATTERIES.
NE PAS INCINÉRER OU PERCER LES PILES.
Made in China / Fabriqué en chine GP1621
Cordless handset
(2 for DLP73210)
(4 for DLP73410/
DLP73440)
(5 for DLP73510/
DLP73540)
Charger for cordless
handset with power
adapter installed
(1 for DLP73210)
(3 for DLP73410/
DLP73440)
(4 for DLP73510/
DLP73540)
Battery for cordless
handset
(2 for DLP73210)
(4 for DLP73410/
DLP73440)
(5 for DLP73510/
DLP73540)
Battery
compartment cover
(2 for DLP73210)
(4 for DLP73410/
DLP73440)
(5 for DLP73510/
DLP73540)
Quick start guide
DLP73210/DLP73410/DLP73440/
DLP73510/DLP73540
DECT 6.0 cordless telephone/
answering system with
BLUETOOTH® wireless technology
Smart call blocker
leaet
Please refer to the online DLP73210/DLP73410/DLP73440/DLP73510/
DLP73540 DECT 6.0 cordless telephone/answering system with
BLUETOOTH® wireless technology Complete user’s manual for a full set
of installation and operation instructions at
www.telephones.att.com/manuals.
1
Important safety information
This symbol is to alert you to important operating or servicing instructions
that may appear in this user’s manual. Always follow basic safety precautions
when using this product to reduce the risk of injury, re, or electric shock.
Safety information
f Read and understand all instructions in the user’s manual. Observe all markings on
the product.
f Avoid using a telephone during a thunderstorm. There may be a slight chance of
electric shock from lightning.
f Do not use a telephone in the vicinity of a gas leak. Under certain circumstances,
a spark may be created when the adapter is plugged into the power outlet, or
when the handset is replaced in its cradle. This is a common event associated with
the closing of any electrical circuit. In an inadequately ventilated environment,
the user should not plug the phone into a power outlet, nor put a charged
handset into the cradle where there are concentrations of ammable or ame-
supporting gases. A spark in such an environment could create a re or explosion.
Such environments might include: medical use of oxygen without adequate
ventilation; industrial gases (cleaning solvents; gasoline vapors; etc.); a leak of natural
gas; etc.
f Do not use this product near water or when you are wet. For example, do not use
it in a wet basement or shower, nor next to a swimming pool, bathtub, kitchen sink
and laundry tub. Do not use liquids or aerosol sprays for cleaning. If the product
comes in contact with any liquid, unplug any line or power cord immediately. Do not
plug the product back in until it has dried thoroughly.
f Install this product in a protected location where no one can trip over any line or
power cords. Protect cords from damage or abrasion.
f If this product does not operate normally, see the Troubleshooting section of the
online Complete user’s manual. If you cannot solve the problem, or if the product
is damaged, refer to the Limited warranty section (pages 33 - 35). Do not
open this product except as directed in your users manual. Opening the product or
reassembling it incorrectly may expose you to hazardous voltages or other risks.
f Replace batteries, only as described in your users manual (Page 5). Do not burn
or puncture batteries — they contain caustic chemicals.
f This power adapter is intended to be correctly oriented in a vertical or oor mount
position. The prongs are not designed to hold the plug in place if it is plugged into a
ceiling or an under-the-table/cabinet outlet.
f For pluggable equipment, the socket-outlet shall be installed near the equipment
and shall be easily accessible.
2
Important safety information
CAUTIONS:
f Use only the power adapter provided with this product. To obtain a replacement,
visit our website at https://telephones.att.com or call
1 (800) 222-3111. In Canada, dial 1 (866) 288-4268.
f U
se only the supplied rechargeable battery or replacement battery (model
BT162342/
BT262342).
To order, visit our website at
https://telephones.att.com, or call 1 (800) 222-3111. In
Canada, dial 1 (866) 288-4268.
CAUTION: To prevent risk of re or battery explosion, replace with
the correct battery type. Dispose of used batteries according to the
instructions.
Especially about cordless telephones
f Privacy: The same features that make a cordless telephone convenient create
some limitations. Telephone calls are transmitted between the telephone base
and the handset by radio waves, so there is a possibility that your cordless
telephone conversations could be intercepted by radio receiving equipment within
range of the cordless handset. For this reason, you should not think of cordless
telephone conversations as being as private as those on corded telephones.
f Electrical power: The telephone base of this cordless telephone must be
connected to a working electrical outlet which is not controlled by a wall switch.
Calls cannot be made from the handset if the telephone base is unplugged,
switched o or if the electrical power is interrupted.
f Potential TV interference: Some cordless telephones operate at frequencies
that may cause interference to TVs and VCRs. To minimize or prevent such
interference, do not place the telephone base of the cordless telephone near
or on top of a TV or VCR. If interference is experienced, moving the cordless
telephone farther away from the TV or VCR will oen reduce or eliminate the
interference.
f Rechargeable batteries: This product contains nickel-metal hydride rechargeable
batteries. Exercise care in handling batteries in order not to create a short
circuit with conductive material such as rings, bracelets, and keys. The battery or
conductor may overheat and cause harm. Observe proper polarity between the
battery and the battery charger.
f Nickel-metal hydride rechargeable batteries: Dispose of these batteries in a safe
manner. Do not burn or puncture. Like other batteries of this type, if burned or
punctured, they could release caustic material which could cause injury.
i
3
The RBRC Seal means that the manufacturer is voluntarily
participating in an industry program to collect and recycle nickel-
metal hydride rechargeable batteries when taken out of service
within the United States. These batteries may be taken to a
participating local retailer of replacement batteries or recycling
center. You may call 1-800-8-BATTERY® for locations accepting
spent Ni-MH batteries.
The RBRC Seal and 1-800-8-BATTERY® are registered trademarks of
Call2recycle, Inc.
Precautions for users of implanted cardiac pacemakers
Cardiac pacemakers (applies only to digital cordless telephones):
Wireless Technology Research, LLC (WTR), an independent research entity, led
a multidisciplinary evaluation of the interference between portable wireless
telephones and implanted cardiac pacemakers. Supported by the U.S. Food and
Drug Administration, WTR recommends to physicians that:
Pacemaker patients:
f Should keep wireless telephones at least six inches from the pacemaker.
f Should NOT place wireless telephones directly over the pacemaker, such as in a
breast pocket, when it is turned ON.
f Should use the wireless telephone at the ear opposite the pacemaker.
WTR’s evaluation did not identify any risk to bystanders with pacemakers from
other persons using wireless telephones.
ECO mode
This power conserving technology reduces power consumption for optimal battery
performance. The ECO mode activates automatically whenever the handset is
synchronized with the telephone base.
Especially about telephone answering systems
Two-way recording: This unit does not sound warning beeps to inform the other
party that the call is being recorded. To ensure that you are in compliance with any
federal or state regulations regarding recording a telephone call, you should start
the recording process and then inform the other party that you are recording the
conversation.
SAVE THESE INSTRUCTIONS
Important safety information
4
Install
Telephone base
Notes:
f Plug one end of the telephone line cord into a telephone jack or a DSL lter.
f If you have DSL high-speed Internet service, a DSL lter (not included) is required.
Charger
Caution: Use only the power adapter(s)
provided with this product. To obtain a
replacement, visit our website at
https://telephones.att.com
or call 1 (800) 222-3111. In Canada,
dial 1 (866) 288-4268.
5
THIS SIDE UP / CE CÔTÉ VERS LE HAUT
Battery Pack / Bloc-piles :
BT183342/BT283342 (2.4V 400mAh Ni-MH)
WARNING / AVERTISSEMENT :
DO NOT BURN OR PUNCTURE BATTERIES.
NE PAS INCINÉRER OU PERCER LES PILES.
Made in China / Fabriqué en chine CR1535
THIS SIDE UP
THIS SIDE UP / CE CÔTÉ VERS LE HAUT
Battery Pack / Bloc-piles :
BT183342/BT
28334
2 (2.4V 400mAh Ni-MH)
WARNING / AVERTISSEMENT :
DO NOT BURN OR PUNCTURE BATTERIES.
NE PAS INCINÉRER OU PERCER LES PILES.
Made in China / Fabriqué en chine CR1535
Battery
Install the battery, as shown below.
Caution: Use only the supplied rechargeable battery or replacement battery
(model BT162342/BT262342).
Install
Charge your handset(s) before initial use. The battery is fully charged aer 11
hours of continuous charging. The CHARGE light on the top of the handset is on
during charging.
6
Handset overview
1
2
3
4
5
6
7
8
9
10
11
12
13
14
Handset
CHARGE light Ì On when the handset is charging in the telephone
base or charger.
VOL p DIR
Ì Press p DIR to show directory entries when the
handset is not in use.
Ì Press to scroll up while in menus.
Ì While entering names or numbers, press to move the
cursor to the right.
Ì Press to increase the listening volume when on a call,
or to increase the message playback volume.
VOL q CID
Ì Press q CID to show caller ID log when the handset is
not in use.
Ì Press to scroll down while in menus.
Ì While entering names or numbers, press to move the
cursor to the le.
Ì Press to decrease the listening volume when on a call,
or to decrease the message playback volume.
CELL
Ì Press to make or answer a cell call.
Ì During a cell call, press to answer an incoming cell call
when you hear a call waiting alert.
Ì During message playback, press to call back the caller
if the caller’s number is available.
1
2
3
7
HOME/
FLASH
Ì Press to make or answer a home call.
Ì During a call, press to answer an incoming home call
when you receive a call waiting alert.
Ì During message playback, press to call back the caller
if the caller’s number is available.
1
Ì While reviewing a caller ID log entry, press repeatedly
to add or remove 1 in front of the telephone number
before dialing or saving it in the directory.
Ì Press and hold to set or to dial your voicemail number.
TONE
*
/a>A
Ì Press to switch to tone dialing temporarily during a call
if you have pulse service.
Ì While entering names, press to change the next letter
to upper or lower case.
/SPEAKER
Ì Press to make or answer a home or cell call using the
speakerphone.
Ì Press to switch between the speakerphone and the
handset.
MUTE/
DELETE/
VOICE
Ì During a call, press to mute the microphone.
Ì When the handset is ringing, press to mute the ringer
temporarily.
Ì While reviewing the caller ID log, the directory or the
redial memory, press to delete an individual entry.
Ì While predialing, press to delete digits.
Ì During message or announcement playback, press
to delete the playing message or the recorded
announcement.
Ì When the handset is not in use, press to activate the
voice-controlled application of connected cell phone.
MENU/
SELECT
Ì When the handset is not in use, press to show the menu.
Ì While in the menu, press to select an item or save an
entry or setting.
CALL BLOCK Ì Press to block the incoming call when the telephone is
ringing.
Ì When on a call, press to block the call.
Ì When the handset is not in use, press to show the call
block menu.
OFF/
CANCEL
Ì During a call, press to hang up.
Ì While in a menu, press to cancel an operation, back
up to the previous menu, or exit the menu display; or
press and hold this button to exit to idle mode.
Ì When the handset is ringing, press to mute the ringer
temporarily.
Ì Press and hold while the telephone is not in use to
erase the missed call indicator.
Handset overview
4
5
6
7
8
9
10
11
8
QUIET#
(pound key)
Ì Press repeatedly to display other dialing options when
reviewing a caller ID log entry.
Ì Press and hold to enter the QUIET mode setting
screen, or to deactivate QUIET mode.
PTT (PUSH
TO TALK)
Ì Press to initiate a one-to-one or one-to-group
broadcast.
Ì Press and hold to broadcast to a group of system
devices.
REDIAL/
PAUSE
Ì Press repeatedly to view the last 10 numbers dialed.
Ì While entering numbers, press and hold to insert a
dialing pause.
2
3
4
5
6
8
9
10
11
12
1
15
14
13
7
Telephone base
REDIAL/PAUSE Ì Press repeatedly to view the last 10 numbers
dialed.
Ì While entering numbers, press and hold to insert a
dialing pause.
VOL
Ì Press to adjust the volume during message
playback.
Ì Press to adjust the listening volume during a call.
Ì When the phone is not in use, press to adjust the
telephone base ringer volume for all lines.
MUTE/VOICE Ì During a call, press to mute the microphone.
Ì While the telephone base is ringing, press to
silence the ringer temporarily.
Ì When the telephone is not in use, press to activate
the voice-controlled application of connected cell
phone.
Handset / Telephone base overview
12
13
14
1
2
3
9
1
Ì While reviewing a caller ID log entry, press
repeatedly to add or remove 1 in front of the
telephone number before dialing or saving it in
the directory.
Ì Press and hold to set or to dial your voicemail
number.
TONE
*
/a>A
Ì Press to switch to tone dialing temporarily during
a call if you have pulse service.
Ì While entering names, press to change the next
letter to upper or lower case.
QUIET#
(pound key)
Ì Press repeatedly to display other dialing options
when reviewing a caller ID log entry.
Ì Press and hold to enter the QUIET mode setting
screen, or to deactivate QUIET mode.
/ANS ON
Ì Press to turn the answering system on or o.
/FIND HS
Ì Press the button to page all system handsets.
Antenna
X/DELETE Ì Press to delete the message currently playing.
Ì When the phone is not in use, press twice to
delete all previously reviewed messages.
Ì While reviewing the redial list, directory, caller ID
log, allow list, block list, or star name list, press to
delete an individual entry.
Ì While entering names or numbers, press to delete
a digit or a character.
Ì While predialing, press to delete a digits.
/REPEAT Ì Press to repeat a message or press twice to play
the previous message.
/SKIP Ì During message playback, press to skip to the
next message.
/PLAY/
STOP
Ì Press to play messages.
Ì Press to stop message playback.
INT Ì Press to initiate an intercom conversation or
transfer a call.
HOME
Ì Press to make or answer a home call.
Ì Flashes quickly when there is an incoming home
call.
Ì Flashes slowly when a home call is on hold.
Telephone base overview
4
5
6
7
8
9
10
10
CELL
Ì Press to make or answer a cell call.
Ì Flashes quickly when there is an incoming cell call.
Ì Flashes slowly when a cell call is on hold.
CALL BLOCK Ì Press to block the incoming call when the
telephone is ringing.
Ì When on a call, press to block the call.
Ì When the telephone base is not in use, press to
show the call block menu.
CELL 1 Light Ì On when the telephone is paired and connected
with a Bluetooth device.
Ì Flashes alternately while pairing a Bluetooth
device.
CELL 2/
Headset Light
Ì On when the telephone is paired and connected
with a Bluetooth device or headset.
Ì Flashes alternately while pairing a Bluetooth
device or headset.
CANCEL Ì While in a menu, press to exit without making
changes or press and hold to return to idle mode.
Ì Press and hold while the telephone is not in use to
erase the missed call indicator.
qCID
Ì Press to scroll down while in a menu.
Ì Press to review the caller ID log when the
telephone is not in use.
Ì While entering names or numbers, press to move
the cursor to the le.
MENU/SELECT Ì When the telephone base is not in use, press to
show the menu.
Ì While in the menu, press to conrm or save an
entry or setting.
pDIR
Ì Press to scroll up while in a menu.
Ì Press to show directory entries when the
telephone is not in use.
Ì While entering names or numbers, press to move
the cursor to the right.
PTT/FLASH Ì Press to display the PTT menu to begin a PTT call.
Ì Press and hold to begin a one-to-group broadcast
when the telephone base is not in use.
Ì During a call, press to answer an incoming home
call when you receive a call waiting alert.
Telephone base overview
11
12
13
14
15
11
Initial basic settings
Aer you install your telephone or power returns following a power outage, the
handset and telephone base will prompt you to set the date and time. To skip
setting the date and time, press OFF/CANCEL on the handset or press CANCEL
on the telephone base.
Voice guide to set Smart call blocker and
answering system
Aer the date and time setting is done or skipped, the telephone base will prompt
if you want to set Smart call blocker. Press MENU/SELECT to start the Smart
call blocker setup via voice guide. To skip the setup, press CANCEL twice on the
telephone base.
Aer the Smart call blocker setting is done or skipped, the telephone base will then
prompt if you want to set up the answering system. Press MENU/SELECT to start
the answering system setup via voice guide. To skip the setup, press CANCEL on the
telephone base.
We recommend you program your telephone system before use. The following
are a few examples of common features to set before using the telephone. Refer to
the Handset and telephone base settings and Answering system settings in the
Complete user’s manual for detailed instructions on setting all telephone features.
Date and time
Note: Set the date/time before using the answering system.
Using a cordless handset or the telephone base:
1. MENU -> / -> Set date/time -> SELECT.
2. Enter the month (MM), day (DD) and year (YY) -> SELECT.
3. Enter the hour (HH) and minute (MM).
4. / -> AM or PM -> SELECT.
Smart call blocker setup via voice guide
You can follow the voice guide to set up Smart call blocker.
Using the telephone base:
1. CALL BLOCK.
2. / -> Voice guide -> SELECT.
3. Press 1 if you want to screen home calls with telephone numbers that are not
saved in your Directory, Allow list, or Star name list; or Press 2 if you do not want
to screen calls, and want to allow all incoming calls to get through.
12
Basic answering system setup via voice guide
You can follow the voice guide to record your own announcement, set the number
of rings and set the message alert tone.
Using the telephone base:
1. Press MENU twice.
2. / -> Voice guide -> SELECT.
3. Set up the answering system by inputting the designated numbers, as
instructed.
Add a Bluetooth
®
cell phone/headset
Note: Your DLP73210/DLP73410/DLP73440/DLP73510/DLP73540 is compatible with Bluetooth
version 2.0 or above devices.
To use a Bluetooth enabled cellular phone or headset with your telephone, you
must rst pair and connect your Bluetooth cellular phone or headset with the
telephone base.
Bluetooth wireless technology operates within a short range (up to 30 feet). Keep
the connected device within 15 feet of the telephone base for optimal performance.
To pair and connect a cell phone using the telephone base:
1. MENU -> / -> Bluetooth -> SELECT.
2. SELECT to select Add cellular.
3. Press SELECT again to turn on the telephone base discoverable mode.
4. Place the cell phone next to the telephone base. Turn on the Bluetooth feature
of your cell phone and search for or add new advices. Once your cell phone nds
your AT&T phone (AT&T DECT 6.0), press the appropriate key on your cell phone
to continue the pairing process.
To pair and connect a headset using the telephone base:
1. MENU -> / -> Bluetooth -> SELECT.
2. / -> Add headset -> SELECT.
3. Set your headset to discoverable mode -> Press SELECT.
Record your own announcement
Your outgoing announcement plays when calls are answered by the answering
system. You can use the preset announcement to answer calls, or replace it with
your own recorded announcement.
Initial basic settings
13
Using a cordless handset:
1. MENU -> / -> Answering sys -> SELECT.
2. SELECT to select Announcement.
3. Press 7 to record.
4. Speak towards the handset to record your announcement and press 5 to end
recording and save it.
Using the telephone base:
1. Press MENU twice.
2. SELECT to select Announcement.
3. SELECT to select Record annc.
4. Speak towards the handset or the telephone base to record your announcement
and press 5 to end recording and save it.
Number of rings
You can set the answering system to answer an incoming call aer 2, 3, 4, 5, or 6
rings. You can also select toll saver. If you choose toll saver, the answering system
answers a call aer two rings when you have new messages, or aer four rings
when there are no new messages. This enables you to check for new messages and
avoid paying unnecessary long distance charges if you are calling from out of your
local area.
Using a cordless handset or the telephone base:
1. MENU -> / -> Answering sys -> SELECT.
2. / -> Ans sys setup -> SELECT.
3. / -> # of rings -> SELECT.
4. / to choose among 2, 3, 4, 5, 6, or Toll saver -> SELECT.
Ringer volume
You can set the ringer volume level to one of the six levels, or turn the ringer o, for
incoming home or cell calls.
Using a cordless handset or the telephone base:
Set ringer volume for incoming home calls:
1. MENU -> / -> Ringers -> SELECT.
2. SELECT to select Home volume.
3. / to choose the desire level -> SELECT.
Set ringer volume for incoming cell calls:
1. MENU -> / -> Ringers -> SELECT.
2. / to to select Cell volume -> SELECT.
3. / to choose the desire level -> SELECT.
Initial basic settings
14
Operate
Operation Steps
Making a home or
cell call
Using a cordless handset:
f Press HOME/FLASH or /SPEAKER -> Enter the
telephone number.
f Press CELL -> Enter the telephone number -> SELECT.
Using the telephone base:
f Press /HOME -> Enter the telephone number.
f Press /CELL -> Enter the telephone number -> SELECT.
On-hook dialing
(predialing)
Using a cordless handset:
Enter the telephone number ->
Press HOME/FLASH, CELL or /SPEAKER to call.
Using the telephone base:
Enter the telephone number -> Press /HOME or /CELL
to call.
LCD language
Using a cordless handset or the telephone base:
1. MENU -> / -> Settings -> SELECT.
2. SELECT again to select LCD language.
3. / to choose English, Français or Español -> SELECT.
Note: If you accidentally change the LCD language to French or Spanish, you can reset it back
to English without going through the French or Spanish menus.
f Press MENU on the handset in idle mode -> enter *364#; or
f Press MENU on the base in idle mode -> enter 364#.
Initial basic settings
15
Operation Steps
Answering a home
or cell call
Using a cordless handset:
Press HOME/FLASH, CELL or /SPEAKER, or press
any dialing keys (0-9 or TONE ).
Using the telephone base:
Press /HOME, /CELL or press any dialing keys (0-9 or
TONE ).
Ending a call Using a cordless handset:
Press OFF/CANCEL or return the handset to the
telephone base or charger.
Using the telephone base:
Press /HOME or /CELL.
Handset
speakerphone
During a call, press /SPEAKER to switch between
handsfree speakerphone and normal handset use.
Redial Using a cordless handset:
Press REDIAL repeatedly to select the desired entry ->
HOME/FLASH, CELL or /SPEAKER to call.
Using the telephone base:
Press REDIAL/PAUSE repeatedly to select the desired entry
-> /HOME or /CELL to call.
Volume control Using a cordless handset or the telephone base:
Press VOL q to decrease or press VOL p to increase the
listening volume during a call.
Call waiting
(Requires
subscription from
telephone)
Press HOME/FLASH on the handset or PTT/FLASH on
the telephone base to put current call on hold and to take
the new call.
Operate
16
Directory
The directory can store up to 1,000 entries, which are shared by all system devices.
Operation Steps
Adding an entry in
the directory
Using a cordless handset:
1. MENU -> / -> Directory ->
SELECT.
2. SELECT to select Add new entry.
3. Enter a telephone number up to 30 digits ->
SELECT
.
4. Enter a name up to 15 characters ->
SELECT
.
Using the telephone base:
1. MENU -> / -> Directory ->
SELECT.
2. / ->
Add new entry
->
SELECT.
3. Enter a telephone number up to 30 digits ->
SELECT
.
4. Enter a name up to 15 characters -> SELECT.
Searching/dialing an
entry
1. Press DIR on the handset or telephone base in idle
mode -> / to select the desired directory.
2. Press HOME/FLASH or /SPEAKER on the
handset, or press /HOME on the telephone base to
call using the home line.
-OR-
Press CELL on the handset, or press /CELL on
the telephone base to call using the cell line.
Download a cell phone directory
To download a cell phone directory using the telephone base:
Before downloading a directory, make sure the cell phone is paired, active, and
connected to your DLP73210/DLP73410/DLP73440/DLP73510/DLP73540.
1. MENU -> / -> Bluetooth -> SELECT.
2. / -> Download dir -> SELECT.
3. Press SELECT to start downloading.
17
Bluetooth
®
Connect to Cell
TM
app
If you are using Bluetooth-enabled cell phones with Android® OS 2.3
or above, you may also download the Connect to Cell™ application
(consists of Caller ID manager and Alerts manager) using the Google
Play® Store app to extend the exibility of your DLP73210/DLP73410/
DLP73440/DLP73510/DLP73540. Scan the QR code on the right to
download the application.
Remote voice control
If you have connected a cell phone to the telephone system, you can activate the
voice-controlled application (voice app) of the cell phone, such as Siri®, Google
Now™ or S Voice®, using the handset or telephone base.
Compatibility:
The remote voice control feature works with:
Voice-controlled application Siri Google Now S Voice
Operation System (Versions supported) iOS (8 or
above)
Android (4 or
above)
Android (4
or above)
Before using the remote voice control feature, make sure you checked the following:
f Your cell phone is paired and connected to your telephone system via Bluetooth.
f No Bluetooth applications are running in the background of your cell phone.
f Keep your cell phone within 15 feet of the telephone base.
f Do not lock up your cell phone’s screen or set passcode for activating the voice
app.
f Make sure you have turned on or logged in to the applications on your cell
phone that you will be sending your voice commands, such as GPS, e-mail and
social networking accounts.
f Your cell phone’s data or Wi-Fi signal is in full strength and your cell phone can
connect to the Internet.
f Try to activate the voice app on your cell phone to ensure it is in place.
Android® and Google Play® are registered trademarks of Google Inc.
Connect to Cell
TM
is a trademark of Advanced American Telephones.
Siri® is a registered trademark of Apple Inc.
Google Now
TM
is a trademark of Google Inc.
S Voice® is a registered mark of Samsung Electronics Co., Ltd.
IOS is a trademark or registered trademark of Cisco in the U.S. and other countries and is used under license.
18
Caller ID
This product supports caller ID services oered by most telephone service
providers. The telephone stores caller ID information of the last 50 incoming calls in
the telephone base. This information is common to all devices.
Caller ID announce
When this feature is on and you have an incoming call, the handset and/or base speaks
Call from...” and the name of the caller based on the directory or caller ID information.
You can turn this feature o for the base or each individual handset, or both.
Using a cordless handset or the telephone base:
1. MENU -> / -> Caller ID annc -> SELECT.
2. / to choose On or O -> SELECT.
Review and dial a number in the call log
1. Press CID on the handset or telephone base in idle mode -> / to scroll
through the list.
2. Press
HOME/FLASH or /SPEAKER on the handset or /HOME on the
telephone base to dial with the home line.
-OR-
Press CELL on the handset, or press /CELL on the telephone base to dial
with the cell line.
Erase missed calls indicator in the call log
When the screen shows XX Missed calls, scroll the call log one by one, or press and
hold OFF/CANCEL on the handset or CANCEL on the telephone base in idle mode.
To activate remote voice control:
1. Press VOICE.
-OR-
If you have two connected cell phones -> / to select a device.
2. When the telephone base or handset plays the conrmation tone, speak toward
the telephone base or handset, and then wait for feedback. Make reply to the
voice app’s feedback, if necessary.
3. Press CANCEL to exit.
Refer to the online Complete users manual for a list of troubleshooting tips on
using Remote voice control feature.
Bluetooth
®
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38

AT&T DLP73510 Manuel utilisateur

Catégorie
Téléphones
Taper
Manuel utilisateur

dans d''autres langues