Minebea Intec Drive-on ramp for Midrics weighing platforms (from size 800 x 800mm and up) Le manuel du propriétaire

Marque
Minebea Intec
Modèle
Drive-on ramp for Midrics weighing platforms (from size 800 x 800mm and up)
Taper
Le manuel du propriétaire
Installation Manual | Installationsanleitung | Notice d’installation |Instalación | Installazione
YAR01..05MAP.. Auffahrrampe | Drive-on Ramp | Rampe d’accès |
Rampa de acceso | Rampa d’accesso
98647-004-08
Drive-on ramp for Midrics weighing platforms (from size 800 x 800mm and up)
Auffahrrampe für Midrics Wägeplattformen (ab Größe: 800 x 800mm).
Rampe d’accès pour les plates-formes de pesée Midrics (à partir des dimensions 800 x 800 mm)
Rampa de acceso para plataformas de pesaje Midrics (a partir del tamaño 800x800 mm)
Rampa d’accesso per piattaforme di pesata Midrics (per dimensioni a partire da 800x800 mm)
Fastening Kit for Midrics Weighing Platforms (Size 800 x 800 mm and Larger).
Fixierset für Midrics Wägeplattformen (ab Größe: 800x800 mm)
Kit de fixation des plate-formes de pesée Midrics (à partir des dimensions 800 x 800 mm)
Kit de fijación para plataformas de pesaje Micrics (a partir del tamaño 800x800 mm) y bastidor de cimentación.
Kit di fissaggio per piattaforme di pesata Midrics (a partir del tamaño 800x800 mm)
Equipment supplied: Lieferumfang:
– 1 Drive-on ramp – 1 x Auffahrrampe
– 2 anchors, d10 mm d ia – 2 x Bodenanker d10 mm
– 2 hexagon nuts – 2x Sechskanntmutter
– 2 washers – 2x Unterlegscheiben
Contenu de la livraison : Suministro:
– 1 rampe d’accès – 1 Rampa de acceso
– 2 visseries de fixation d10 mm diámetro –2 pernos de anclaje d10 mm diámetr
– 2 écrous hexagonaux – 2 tuercas hexagonales
– 2 rondelles plates – 2 placas de apoyo
Equipaggiamento fornito:
– 1 rampa d’accesso
– 2 bulloni di fissaggio d10 mm
– 2 dadi esagonali
– 2 rondelle
Installation | Installation | Installation | Instalación | Installazione
10mm
10mm
98647-004-08
98647-004-08
Minebea Intec Bovenden GmbH & Co. KG
Leinetal 2, 37120 Bovenden, Germany
Phone +49.551.309.83.0
Fax +49.551.309.83.190
www.minebea-intec.com
Copyright by Minebea Intec ,Bovenden,
Germany.
No part of this publication may be reprinted
or translated in any form or by any means
without prior written permission from
Minebea Intec . All rights reserved.
The status of the information, specifications
and illustrations in this manual is indicated
by the date given below. Minebea Intec
reserves the right to make changes to the
technology, features, specifications, and
design oftheequipment without notice.
Date: February 2017
Printed in Germany on paper that has been
bleached without any use of chlorine.
RS · KT
Publication No.: WYA6090-p17023
  • Page 1 1
  • Page 2 2

Minebea Intec Drive-on ramp for Midrics weighing platforms (from size 800 x 800mm and up) Le manuel du propriétaire

Marque
Minebea Intec
Modèle
Drive-on ramp for Midrics weighing platforms (from size 800 x 800mm and up)
Taper
Le manuel du propriétaire
Télécharger le PDF
rapport

dans d''autres langues

Documents connexes

Autres documents