GE Monogram ZHU36RSMSS Manuel utilisateur

Owner’s

Manual

30″and 36″

Induction Cooktops

For Models:

ZHU30

ZHU36

76,2 cm et 91,4 cm (30″et 36″)

Table de cuisson à induction

Manuel du propriétaire

Pour à la Modèles :

ZHU30

ZHU36

La section française commence à la page 27

30″y 36″

Anafe de inducción

Manual del propietario

Para Modelos:

ZHU30

ZHU36

La sección en español empieza en la página 51

49-80509-1

01-08 JR

monogram.com

Consumer Information

Induction Cooktop

2

Introduction

Your new Monogram cooktop makes an eloquent statement of style, convenience and kitchen

planning flexibility. Whether you chose it for its purity of design, assiduous attention to detail—

or for both of these reasons—you’ll find that your Monogram cooktop’s superior blend of form and

function will delight you for years to come.

Your Monogram cooktop was designed to provide the flexibility to blend in with your kitchen

cabinetry. Its sleek design can be beautifully integrated into the kitchen.

The information on the following pages will help you operate and maintain your cooktop properly.

If you have any questions, visit our Website at: monogram.com

Contents

Care and Cleaning

Control Lock Pad . . . . . . . . . . . . . . . . . . . . . . . . . . 19

Glass Cooktop . . . . . . . . . . . . . . . . . . . . . . . . . 19–21

Packaging Tape . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

Consumer Services

Before You Call for Service . . . . . . . . . . . . . .22, 23

Important Phone Numbers . . . . . . . . . . . . . . . . 29

Model and Serial Number . . . . . . . . . . . . . . . . . . . 2

Safety Instructions . . . . . . . . . . . . . . . . . . . . . . .4–7

Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30

Operating Instructions

Cookware Recommendations . . . . . . .10–12, 18

Features of Your Cooktop . . . . . . . . . . . . . . . . .8, 9

How Induction Cooking Works . . . . . . . . . . . . . . . .10

Kitchen Timer . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16

Locking the Cooktop . . . . . . . . . . . . . . . . . . . . . . .17

Low Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15

Setting the Controls . . . . . . . . . . . . . . . . . . . .13–15

Surface Elements . . . . . . . . . . . . . . . . . . . . . . . . . 13

Before

using your

cooktop

Read this manual carefully. It is intended to help

you operate and maintain your new cooktop

properly.

Keep it handy for answers to your questions.

If you don’t understand something or need more

help, there is a list of toll-free consumer service

numbers included in the back section of this

manual.

OR

Visit our Website at: monogram.com

Write

down the

model &

serial

numbers

You’ll find them on a label under the cooktop.

Fill out and return the Consumer Product

Registration Card that is packed with this

product.

Before sending in the card, please write the

numbers here:

Model Number

Serial Number

Use these numbers in any correspondence or

service calls concerning your cooktop.

3

If you

received a

damaged

cooktop

Immediately contact the dealer (or builder) that

sold you the cooktop.

Save time

& money

Read this manual. Inside you will find many

helpful hints on how to use and maintain your

cooktop properly. Just a little preventive care on

your part can save you a great deal of time and

money over the life of your cooktop.

You’ll find many answers to common problems

in the Before You Call for Service section. If you

review our chart of Troubleshooting Tips first,

you may not need to call for service at all.

If you

need

service

To obtain service, see the Consumer Services

page in the back of this manual.

We’re proud of our service and want you to be

pleased. If for some reason you are not happy

with the service you receive, here are some

steps to follow for further help.

FIRST, contact the people who serviced your

appliance. Explain why you are not pleased.

In most cases, this will solve the problem.

NEXT, if you are still not pleased, write all the

details—including your phone number—to:

Manager, Customer Relations

GE Appliances

Appliance Park

Louisville, KY 40225

Consumer Information

Induction Cooktop

IMPORTANT SAFETY INSTRUCTIONS

4

WARNING!

For your safety, the information in this manual must be followed to minimize the risk of fire or explosion, electric

shock, or to prevent property damage, personal injury, or loss of life.

This unit has been tested and found to comply with

the limits for a class B digital device, pursuant to Part

18 of the FCC rules. These limits are designed to

provide reasonable protection against harmful

interference in a residential installation. This unit

generates, uses and can radiate radio frequency

energy and, if not installed and used in accordance

with the instructions, may cause harmful interference

to radio communications. However, there is no

guarantee that interference will not occur in a

particular installation. If this unit does cause harmful

interference to radio or television reception, which can

be determined by turning the unit off and on, the user

is encouraged to try to correct the interference by one

or more of the following measures:

•

Reorient or relocate the receiving antennae.

•

Increase the distance between the unit and receiver.

•

Connect the unit into an outlet or a circuit different

from that to which the receiver is connected.

IMPORTANT SAFETY NOTICE:

•

The California Safe Drinking Water and Toxic

Enforcement Act requires the Governor of California

to publish a list of substances known to the state to

cause cancer, birth defects or other reproductive

harm, and requires businesses to warn customers

of potential exposure to such substances.

•

Use proper pan size. This appliance is equipped

with one or more COOKING ZONES of different sizes.

Select utensils having flat bottoms large enough to

cover the Cooking Zones. The pan detection sensors

will not allow the affected Cooking Zone to operate

without a pan present.

•

Utensil handles should be turned inward and

should not extend over adjacent cooking zones

to reduce the risk of burns, ignition of flammable

materials and spillage due to unintentional contact

with the utensil.

•

Never leave prepared food on the cooking zones

unattended. Boilovers cause smoking and greasy

spillovers that may ignite, or a pan that has boiled

dry may melt or become damaged.

•

Protective liners: Do not use aluminum foil to line

any part of the cooktop. Only use aluminum foil as

recommended after the cooking process, if used as

a cover to be placed over the food. Any other use of

aluminum foil may result in the risk of electric shock,

fire or short circuit.

•

Avoid placing any objects on or near the keypads

in order to prevent accidental activation of the

cooktop controls.

•

Know which touch key pad controls each surface

of the Cooking Zones.

•

Clean the appliance regularly to keep all parts

free of grease that could catch fire. Exhaust fan

ventilation hoods and grease filters should be kept

clean. Do not allow grease to accumulate on hood

or filter. Greasy deposits in the fan could catch fire.

When flaming food under the hood, turn fan on.

Refer to hood manufacturer's instructions for cleaning.

Serial Plate Location

You will find the model and serial number printed on

the serial plate. The serial plate is located under the

cooktop. Please see the illustration for exact location.

Remember to record the serial number BEFORE

INSTALLATION of the cooktop (See Product Registration,

page 2). The serial plate is located under the burner box

of the cooktop.

Name plate location

CAUTION:

Persons with a pacemaker or similar medical

device should exercise caution when using or

standing near an induction unit while it is in

operation. The electromagnetic field may affect the

working of the pacemaker or similar medical device.

It is advisable to consult your doctor or the

pacemaker manufacturer about your particular

situation.

5

WARNING!

For your safety, the information in this manual must be followed to minimize the risk of fire

or explosion, electric shock, or to prevent property damage, personal injury, or loss of life.

When using electrical appliances, basic safety precautions should be followed, including the following:

•

Use this appliance only for its intended use

as described in this manual.

•

Do not attempt to repair or replace any

part of your cooktop unless it is specifically

recommended in this manual. All other

servicing should be referred to a qualified

technician.

•

Before performing any service, disconnect

the cooktop power supply at the household

distribution panel by removing the fuse or

switching off the circuit breaker.

•

Be sure your appliance is properly installed

and grounded by a qualified technician in

accordance with the provided installation

instructions.

•

Have the installer show you the location

of the circuit breaker or fuse. Mark it for

easy reference.

•

Do not leave children alone—children

should not be left alone or unattended

in an area where an appliance is in use.

They should never be allowed to sit or

stand on any part of the appliance.

•

Teach children not to play with the controls

or any other part of the cooktop.

•

Do not allow anyone to climb, stand or

hang on the cooktop.

•

CAUTION:Items of interest to

children should not be stored in cabinets

above a cooktop—children climbing on the

cooktop to reach items could be seriously

injured.

•

Always keep combustible wall coverings,

curtains or drapes a safe distance from

your cooktop.

•

Always keep dish towels, dishcloths, pot

holders and other linens a safe distance

away from your cooktop.

•

Always keep wooden and plastic utensils

and canned food a safe distance away

from your cooktop. They may become hot

and could cause burns.

•

Never wear loose-fitting or hanging

garments while using the appliance.

Flammable material could be ignited

if brought in contact with hot surface

elements and may cause severe burns.

•

Use only dry pot holders—moist or damp

pot holders on hot surfaces may result in

burns from steam. Do not let pot holders

touch hot surface elements. Do not use a

towel or other bulky cloth. Such cloths can

catch fire on a hot surface element.

•

Do not use water on grease fires. Never

pick up a flaming pan. Turn the controls off.

Smother a flaming pan on a surface element

by covering the pan completely with a well-

fitting lid, cookie sheet or flat tray. Use a

multi-purpose dry chemical or foam-type

extinguisher.

•

Flaming grease outside a pan can be

put out by covering with baking soda or,

if available, by using a multi-purpose dry

chemical or foam-type fire extinguisher.

•

When preparing flaming foods under the

hood, turn the fan on.

•

Cook meat and poultry thoroughly—meat

to at least an INTERNAL temperature of

160°F and poultry to at least an INTERNAL

temperature of 180°F. Cooking to these

temperatures usually protects against

foodborne illness.

SAFETY PRECAUTIONS

6

IMPORTANT SAFETY INSTRUCTIONS

• Do not touch glass ceramic surface

elements while cooking. This surface may

be hot enough to burn even though it may

appear dark in color. During and after use, do

not touch, or let clothing or other flammable

materials contact the cooking surface. Note

the hot indicator lights and allow sufficient

time for cooling first.

• Hot surfaces may include both the cooktop

and areas facing the cooktop.

• To minimize the possibility of burns,

ignition of flammable materials and

spillage, the handle of a container should

be turned toward the center of the cooktop

without extending over any nearby surface

elements.

• Always turn off the surface element control

before removing the cookware.

• Never leave surface elements unattended

at high heat settings. Boilovers may cause

smoking and greasy spillovers may ignite.

• Keep an eye on foods being fried at high

or medium-high heat settings.

• Foods for frying should be as dry as

possible. Frost on frozen foods or moisture

on fresh foods can cause hot fat to bubble

up and over the sides of the pan.

• Use little fat for effective shallow or deep-

fat frying. Filling the pan too full of fat can

cause spillovers when food is added.

• If a combination of oils or fats will be used

in frying, stir together before heating, or as

fats melt slowly.

• Always heat fat slowly, and watch as it heats.

• Use a deep-fat thermometer whenever

possible to prevent overheating fat beyond

the smoking point.

• Never try to move a pan of hot fat,

especially a deep-fat fryer. Wait until the

fat is cool.

• Do not store flammable materials near

the cooktop.

• Keep the hood and grease filters clean to

maintain good venting and to avoid grease

fires.

• Do not store or use combustible materials,

gasoline or other flammable vapors and

liquids in the vicinity of this or any

appliance.

• Clean only parts listed in this Owner’s

Manual.

• Do not leave paper products, cooking

utensils or food on the cooktop when not

in use.

• Keep cooktop clean and free of

accumulation of grease or spillovers

which may ignite.

• Never heat unopened food containers.

Pressure buildup may make container burst

and cause injury.

• Never leave jars or cans of fat drippings

on or near your cooktop.

• Never use your appliance for warming

or heating the room.

SAFETY PRECAUTIONS

7

• Avoid scratching the glass cooktop. The

cooktop can be scratched with items such

as sharp instruments, rings or other jewelry.

• Never use the glass cooktop surface as a

cutting board.

• Do not place or store items on top of the

glass cooktop surface when it is not in use.

• Be careful when placing spoons or other

stirring utensils on glass cooktop surface

when it is in use. They may become hot

and could cause burns.

• Avoid heating an empty pan. Doing so may

damage the cooktop and the pan.

• Do not allow water, other liquids or grease

to remain on the cooktop.

• Do not operate the glass surface elements

if the glass is broken. Spillovers or cleaning

solution may penetrate a broken cooktop

and create a risk of electrical shock. Contact

a qualified technician immediately should

your glass cooktop become broken.

• Spilled or burnt-on foods may cause

accidental activation or deactivation of the

keypad. Clean the keypad thoroughly, and

controls will resume normal operation.

• Clean the cooktop with caution. Always

lock the control panel using the control lock

feature and wait until the entire glass surface

is cool before attempting to clean the

cooktop. See the Locking the Cooktop section

for details. If a wet sponge or cloth is used

to wipe spills on a hot surface element, be

careful to avoid steam burns. Some cleansers

can produce noxious fumes if applied to

a hot surface.

■NOTE: We recommend that you avoid

wiping any surface element areas until they

have cooled and the indicator light has gone

off. Sugar spills are the exception to this.

Please see the Cleaning the glass cooktop

section.

• To avoid possible damage to the cooking

surface, do not apply the cleaning cream

to the glass surface when it is hot.

• After cleaning, use a dry cloth or paper

towel to remove all the cleaning cream

residue.

• Read and follow all instructions and

warnings on the cleaning cream labels.

• Large scratches or impacts to cooktops

can lead to broken or shattered glass.

• Use care when touching the cooktop. The

glass surface of the cooktop will retain heat

after the controls have been turned OFF.

• Do not stand on the glass cooktop.

• When a self-cleaning oven is installed

below the cooktop and the oven is in the

self clean mode, it is not recommended

that the induction cooktop be used during

the oven self clean cycle.

SAVE THESE INSTRUCTIONS

INDUCTION SURFACE ELEMENTS

Features of Your Cooktop

Induction Cooktop

Features

(Throughout this

manual, features and

appearance may

vary.)

8

Feature Index Page

1 Cooking Elements 13

2 Control Lock 17

3 Kitchen Timer 16

4 ON Indicator Light (one for each element) 13

5 Hot Surface Indicator Light Area 13

6 Cooking Element ON/OFF Control 13

ZHU36 – 36″ Induction Cooktop

1

5

2

4

3

6

9

Features of Your Cooktop

Induction Cooktop

Features

(Throughout this

manual, features and

appearance may

vary.)

NOTE: 30” models have cooking element location

indicators next to each control.

1

2

3

5

Feature Index Page

1 Cooking Elements 13

2 Control Lock 17

3 Kitchen Timer 16

4 ON Indicator Light (one for each element) 13

5 Hot Surface Indicator Light Area 13

6 Cooking Element ON/OFF Control 13

ZHU30 – 30″ Induction Cooktop

6

4

10

Each cooking element requires a MINIMUM pan size.

If the pan is properly centered, and of the correct

material, but is too small for the cooking element,

the element cannot be activated. The display will

flash “F” along with the power level selected.

Cookware larger than the element ring may be

used; however, heat will only occur above the

element.

For best results, the cookware must make FULL

contact with the glass surface.

Do not allow the bottom of the pan or cookware

to touch the surrounding metal cooktop trim or

to overlap the cooktop controls.

For best performance, match the pan size to the

element size. Using a smaller pot on a larger burner

will generate less power at any given setting.

Using Your Cooktop

Induction Cooktop

How

induction

cooking

works

The elements beneath the cooking surface

produce a magnetic field that causes the

electrons in the ferrous metal pan to vibrate

and produce heat.

The cooking surface itself does not heat. Heat

is produced in the cooking pan, and cannot be

generated until a pan is placed on the cooking

surface.

When the element is activated, the pan begins to

heat immediately and in turn heats the contents

of the pan.

Magnetic induction cooking requires the use

of cookware made of ferrous metals—metals

to which magnets will stick, such as iron or steel.

Use pans that fit the element size. The pan must

be large enough for the safety sensor to activate

an element.

The cooktop will not start if a very small steel or

iron utensil (less than the minimum size across

the bottom) is placed on the cooking surface

when the unit is turned on—items such as steel

spatulas, cooking spoons, knives and other

small utensils.

Using the

correct size

cookware

5-3/4” Min. Dia.

Pan Size

5-3/4” Min. Dia.

Pan Size

5-3/4” Min. Dia.

Pan Size

5-3/4” Min. Dia.

Pan Size

4-3/4” Min.

Dia.

Pan Size

7” Min. Dia.

Pan Size

4-3/4” Min.

Dia. Pan Size

7” Min. Dia.

Pan Size

7” Min. Dia.

Pan Size

30” Wide Cooktop. Use the minimum size pan shown for

each cooking element.

36” Wide Cooktop. Use the minimum size pan shown for each

cooking element.

Use the minimum size pan for the element.

The pan material is correct if a magnet

sticks to the bottom.

Min. Size

11

Using the

cookware

correctly

Cookware must fully contact the surface of the

cooking element.

Use flat-bottomed pans sized to fit the cooking

element and also to the amount of food being

prepared.

CAUTION:

• The cooking elements may appear to be cool

while turned ON and after they have been turned

OFF. The glass surface may be HOT from residual

heat transferred from the cookware and burns

may occur.

• DO NOT TOUCH HOT COOKWARE or PANS

directly with hands. Always use mitts or pot

holders to protect hands from burns.

• DO NOT SLIDE cookware across the cooktop

surface. Doing so may permanently damage

the appearance of the ceramic cooktop.

Using Your Cooktop

Induction Cooktop

Cookware not centered on

cooking element surface.

Curved or warped pan bottoms

or sides.

Pan does not meet the minimum

size required for the cooking

element used.

Cookware centered correctly

on cooking element surface.

Flat pan bottom.

Pan size meets or exceeds the

recommended minimum size

for the cooking element used.

INCORRECT

CORRECT

Pan bottom rests on cooktop

trim or does not rest completely

on the cooktop surface.

Heavy handle tilts pan.

Pan bottom rests completely on

the cooktop surface.

Pan is properly balanced.

12

Using Your Cooktop

Induction Cooktop

Do not place wet pans or lids on the cooking

surface or induction rings.

Do not place wet fingers on the glass cooktop.

Wipe up spills on the controls with dry hands.

Do not use woks with support rings. This type

of wok will not heat on an induction element.

Use only a flat-bottomed wok, available from many

cookware manufacturers. The bottom of the wok

should match the diameter of the induction ring to

insure proper contact.

Some special cooking procedures require specific

cookware such as pressure cookers, deep-fat fryers,

etc. Cookware with flat bottoms that match the size

of the surface element being used will produce the

best results.

For best

results

Choosing

cookware

Use quality cookware with heavier bottoms for

better heat distribution and even cooking results.

Choose cookware made of magnetic stainless

steel, enamel coated cast iron, enameled steel

and combinations of these materials.

Some cookware is specifically identified by the

manufacturer for use with induction cooktops.

Use a magnet to test if the cookware will work.

Flat-bottomed pans give best results. Pans with

rims or slight ridges can be used.

Round pans give best results. Pans with warped

or curved bottoms will not heat evenly.

For wok cooking, use a flat-bottomed wok. Do

not use a wok with a support ring.

Cookware “noise”

Slight sounds may be produced by different

types of cookware. Heavier pans such as

enameled cast iron produce less noise than a

lighter weight multi-ply stainless steel pan. The

size of the pan, and the amount of contents, can

also contribute to the sound level.

When using adjacent elements that are set at

certain power level settings, magnetic fields may

interact and produce a low whistle or intermitted

“hum”. These noises can be reduced or eliminated

by lowering or raising the power level settings of

one or both of the elements. Pans that completely

cover the element ring will produce less noise.

A low “humming” noise is normal particularly

on high settings.

Use a flat-bottomed wok.

Use a griddle.

Use flat-bottomed pans.

13

Touch control

Using Your Cooktop

Induction Cooktop

Cooking

elements

Touch the pad lightly with the flat part of your

fingertip. Touch the center of the pad to ensure

the cooktop response.

A

“

beep

”

sound can be heard with each touch

to any pad.

Each of the cooking elements have separate

ON/OFF pads and LED display.

Be sure to use cookware that meets the

minimum pan size requirements.

To turn on a cooking element:

1 Place a pan with food onto the induction element.

The pan size should match the indicator ring.

2 Touch the ON/OFF pad. “5” will flash

in the display.

3 Touch the (+) or (-) pad to select power level and

to activate the induction element. A sound will

beep. The (+) or (-) pad must be pressed within

10 seconds to activate the element.

NOTE: You can also touch and hold the pad to scroll

quickly to the desired setting.

The induction circuit detects the pan and allows

the element to be activated. Both the element ON

indicator light and the cooktop HOT SURFACE light

will illuminate. If no power level is selected within

10 seconds, the zone will be deactivated.

To turn the control to OFF, touch the ON/OFF pad.

The induction element will be turned off and the

display will be blank.

With an element control ON:

If a pan is removed or moved to off-center from the

cooking ring, the control will flash “F” along with the

power setting. After 30 seconds, the element will be

deactivated and displays will turn off.

If the pan is placed back on the zone within

30 seconds, the flashing will stop and cooking

will resume.

Using Your Cooktop

Induction Cooktop

14

Power level

settings

The cooktop offers 19 power levels, including a

Boost setting. Power levels range from “L” to 9

in precise half-step increments. For example: 1,

1-1/2, 2, 2-1/2 and up to power level 9.

Power Level “L”, the lowest setting, is

recommended for “Keep Warm.”

The power level increases one-half level with

each touch.

Power level 9 is the highest normal power setting.

1/2

The power level with a fraction indicates the

additional half-step setting.

Flashing “F”

in display

If a pan is removed or moved off-center from the

cooking ring during the cooking process, the

control will flash “F” along with the power setting.

The flashing “F” indicates that the pan is no

longer detected. After 30 seconds, the element

will be deactivated and the display will turn off.

If the pan is returned to the surface element

within 30 seconds, the flashing “F” will disappear

and cooking will resume.

Boost

setting

Boost is the highest power level, designed for large

quantity rapid cooking and boiling. Boost will

operate for a maximum of 10 minutes. After 10

minutes, it will automatically revert to power level 9.

Boost may be repeated after the initial 10 minute

cycle.

CAUTION: Do not leave a pot unattended while

in the Boost Mode.

To start the Boost power setting:

1 Place a pan matching the size of the induction

element over the selected indicator ring.

2 Touch the ON/OFF pad. “5” will flash

in the display.

3 Touch and hold the (+) pad until the display

reads “H.”

NOTE: If the pan is removed, the display will flash “F”

alternating to “H”. After 30 seconds, the elements will

turn off automatically.

Sounds you may hear:

You may hear a slight “buzz” sound when

cooking with the Boost or high mode. This is

normal. The sound depends on the type of pot

being used. Some pots will “buzz” louder

depending on the material. A “buzz” sound may

be heard if the pan contents are cold. As the pan

heats, the sound will decrease. If the power level

is reduced, the sound level will go down.

15

Using Your Cooktop

Induction Cooktop

Power sharing

Four burner cooktops are divided into two

separate heating zones. The right and left side

cooking zones are powered by separate and

independent induction generators. One generator

controls 2 elements, or two cooking zones within

a heating section share the power of one

generator.

Five burner cooktops are divided into 3 zones.

The right and left side have separate cooking

zones and the large center element is another

separate cooking zone.

Power Sharing is activated when both elements

in the same cooking zone are activated and one

element is set for Boost (H). The element that is

not set for Boost will change to a lower power

level. This is called Power Sharing. When Boost

operation is complete (10 minutes), the other

element may be reset to any power level. Both

elements can operate simultaneously at normal

power level settings of “L” to 9.

4 burner cooktops with right and left side (2)

induction generators.

5 burner cooktops with right, left and center (3)

induction generators.

Using the

low setting

1 Place a pan with food onto the induction element.

The pan size should match the indicator ring.

2 Touch the ON/OFF pad. “5” will flash in the display.

3 Touch the (-) pad until the display reads “L.” A

sound will beep.

Do not use plastic wrap to cover food. Plastic may

melt onto the surface and be very difficult to remove.

Use only cookware recommended for this cooktop.

The Low setting will keep hot, cooked food at serving

temperature. Always start with hot food. Do not use

to heat cold food.

Placing uncooked or cold food on surface element

set for Low could result in food-borne illness.

For best results, all food set for Low should be

covered with a lid or aluminum foil. Pastries or breads

should be vented to allow moisture to escape.

Always use pot holders or oven mitts when removing

food from the element set for Low as cookware and

plates will be hot.

CAUTION: Do not warm food on the “L”

power level for more than two hours.

IMPORTANT NOTE FOR FOUR BURNER

MODELS:

The elements on the right side share one

generator. Both elements can operate at any

non-Boost (level L to 9) power level at the same

time. When the large 11″element is set for “H”

or Boost, the smaller element is automatically

shut off and cannot be activated. After 10

minutes, Boost (H) will revert to power level 9.

At that time, the smaller element may be

activated and set for any power level.

16

Using Your Cooktop

Induction Cooktop

Using the

kitchen

timer

NOTE: Use the kitchen timer to measure cooking time

or as a reminder. The kitchen timer does not control

the cooking elements.

1 Touch the TIMER ON/OFF pad.

2 Touch the (+) or (-) pad to choose the desired

number of minutes. When the (+) or (-) pad is held

for several seconds, the timer will increase or

decrease at a faster rate. The timer will

automatically start to count down the minutes

you have selected within 5 seconds of the last

entry. The display will show the minutes and

a “ .“ will flash.

3 The timer displays minutes remaining until it

reaches one minute. At one minute, the timer

display changes to seconds and displays the

seconds remaining.

When the timer counts down to zero time (00)

remaining, the timer will signal with a long beep

for three seconds and the display will flash “00”.

The flashing display will continue and a double

beep will be heard every 10 seconds until you

touch the TIMER ON/OFF pad. After 5 minutes, the

flashing display and signal will be deactivated.

Touch the ON/OFF pad to turn the timer off at any

time. Touch (+) or (-) to add or subtract to the set

time.

Hot surface

indicator

light

A HOT SURFACE indicator light (one for each cooking

element) will glow immediately when any element is

activated. The indicator light(s) glow when the glass

surface is hot, and will remain on until the surface

has cooled to a temperature that is safe to touch.

17

Error alerts

(Flashing

“E”/”c” and

“E” “o”)

Error alerts indicate a temporary problem that may

be corrected by the user.

Clear Keypad—If the display flashes “E” alternating

to “c”, the keypad is sensing continuous activation

of one or more keypads. Clean or clear any

obstructions on the keypad area. Obstructions may

be water, food spills, a utensil or other objects.

To resume cooking, touch the ON/OFF pad, then

select the power level.

Over Temperature—If the display flashes “E”

alternating to “o”, the cooktop sensor indicates

that the induction element or electronics have

overheated.

Overheating of the element is caused by placing

an empty pan on the element and selecting a high

power level. The element sensor detects very high

temperatures (above normal cooking temperatures),

turns off the power and displays the error. A second

potential cause of this error is a lack of cooling air

to the bottom of the cooktop, which can cause

overheating of the electronics. If this situation

occurs, make sure the air inlet below the cooktop

is unobstructed.

Touch the ON/OFF pad and allow the cooktop

to cool for 30 to 45 minutes before operation

can begin again.

If either of these conditions persist, call for service.

IMPORTANT: If the “E” flashes alone, without

alternating to a “c” or “o”, a hardware error has

occurred. Call for service.

Using Your Cooktop

Induction Cooktop

Control lock

IMPORTANT: As a convenience, you can lock the

entire cooktop at any time when it is not in use or

before cleaning. Locking the cooktop will prevent

surface elements from being turned on accidentally.

To lock the cooktop:

Touch and hold the CONTROL LOCK pad for 5 seconds.

A two-beep signal will sound, and the CONTROL LOCK

light will glow, indicating that the cooktop is locked.

If the cooktop is locked while a surface element

is in use, it will automatically turn off.

The CONTROL LOCK does not affect the timer.

If Control Lock is set while the timer is counting

down, it will continue to operate.

To unlock the cooktop:

Touch and hold the CONTROL LOCK pad again

for 5 seconds. A two-beep signal will sound, and

the CONTROL LOCK light will go out, indicating

that the cooktop is unlocked.

18

Using Your Cooktop

Induction Cooktop

Observe

the following

points in

canning

When canning with water-bath or pressure

canner, larger-diameter pots may be used. This is

because boiling water temperatures (even under

pressure) are not harmful to the cooktop surfaces

surrounding the surface elements.

HOWEVER, DO NOT USE LARGE-DIAMETER

CANNERS OR OTHER LARGE-DIAMETER POTS FOR

FRYING OR BOILING FOODS OTHER THAN WATER.

Most syrup or sauce mixtures—and all types of

frying—cook at temperatures much higher than

boiling water. Such temperatures could eventually

harm the glass cooktop surfaces.

1 Be sure the canner fits over the center of the

surface element. If your cooktop or its location

does not allow the canner to be centered on

the surface element, use smaller-diameter pots

for good canning results.

2 Flat-bottomed canners must be used. Do not

use canners with flanged or rippled bottoms

(often found in enamelware) because they

don’t make enough contact with the surface

elements and take a long time to boil water.

3 When canning, use recipes and procedures

from reputable sources. Reliable recipes

and procedures are available from the

manufacturer of your canner; manufacturers

of glass jars for canning, such as Ball and Kerr

brand; and the United States Department

of Agriculture Extension Service.

4 Remember that canning is a process that

generates large amounts of steam. To avoid

burns from steam or heat, be careful when

canning.

Note: Flat-bottomed canners are

required for glass cooktops.

Wrong!

Right!

NOTE: If your house has low voltage, canning

may take longer than expected, even though

directions have been carefully followed. The

process time will be shortened by:

(1) using a pressure canner, and

( 2) starting with HOT tap water for fastest

heating of large quantities of water.

CAUTION:

• Safe canning requires that harmful

microorganisms are destroyed and that the

jars are sealed completely. When canning

foods in a water-bath canner, a gentle but

steady boil must be maintained for the

required time. When canning foods in a

pressure canner, the pressure must be

maintained for the required time.

• After you have adjusted the controls, it is very

important to make sure the prescribed boil or

pressure levels are maintained for the required

time.

• Since you must make sure to process the

canning jars for the prescribed time, with no

interruption in processing time, do not can

on any cooktop surface element if your canner

is not flat.

19

Care and Cleaning

Induction Cooktop

Control lock

pad

As a convenience, you can lock the entire

cooktop at any time when it is not in use or

before cleaning.

Locking the cooktop will prevent surface

elements from being turned on accidentally.

Begin by locking the cooktop; see

Control Lock.

How to remove

protective

shipping film

and packaging

tape

Carefully grasp a corner of the protective shipping

film with your fingers and slowly peel it from the

appliance surface. Do not use any sharp items to

remove the film. Remove all of the film before using

the appliance for the first time. To assure no damage

is done to the finish of the product, the safest way to

remove the adhesive from packaging tape on new

appliances is an application of a household liquid

dishwashing detergent. Apply with a soft cloth and

allow to soak.

NOTE: The adhesive must be removed from all

parts. It cannot be removed if it is baked on.

Normal

daily

cleaning

Use CERAMA BRYTE

®

Ceramic Cooktop Cleaner on

the glass cooktop.

To maintain and protect the surface of your glass

cooktop, follow these steps:

1 Before using the cooktop for the first time, clean it

with CERAMA BRYTE

®

Ceramic Cooktop Cleaner.

This helps protect the top and makes cleanup

easier.

2 Daily use of CERAMA BRYTE

®

Ceramic Cooktop

Cleaner will help keep the cooktop looking new.

3 Shake the cleaning cream well. Apply a few drops

of CERAMA BRYTE

®

Ceramic Cooktop Cleaner

directly to the cooktop.

4 Use a paper towel or CERAMA BRYTE

®

Cleaning

Pad for Ceramic Cooktops to clean the entire

cooktop surface.

5 Use a dry cloth or paper towel to remove all

cleaning residue. No need to rinse.

NOTE: It is very important that you DO NOT heat

the cooktop until it has been cleaned thoroughly.

Clean your cooktop after each spill.

Use CERAMA BRYTE

®

Ceramic

Cooktop Cleaner.

Be sure electrical power is off and all surfaces are cool before cleaning any part of the cooktop.

20

Care and Cleaning

Induction Cooktop

Burned-on

residue

WARNING: DAMAGE to your glass surface may

occur if you use scrub pads other than the pad

included with your cooktop.

1 Allow the cooktop to cool.

2 Spread a few drops of CERAMA BRYTE

®

Ceramic

Cooktop Cleaner on the entire burned residue

area.

3 Using the included CERAMABRYTE

®

Cleaning

Pad for Ceramic Cooktops, rub the residue area,

applying pressure as needed.

4 If any residue remains, repeat the steps listed

above as needed.

5 For additional protection, after all residue has

been removed, polish the entire surface with

CERAMA BRYTE

®

Ceramic Cooktop Cleaner

and a paper towel.

Use a CERAMA BRYTE

®

Cleaning Pad for

Ceramic Cooktops or a Scotch-Brite

®

Multi-Purpose No Scratch blue scrub

pad.

Heavy

burned-on

residue

1 Allow the cooktop to cool.

2 Use a single-edge razor blade scraper at

approximately a 45° angle against the glass

surface and scrape the soil. It will be necessary

to apply pressure to the razor scraper in order

to remove the residue.

3 After scraping with the razor scraper, spread a

few drops of CERAMA BRYTE

®

Ceramic Cooktop

Cleaner on the entire burned residue area. Use

the CERAMA BRYTE

®

Cleaning Pad to remove

any remaining residue.

4 For additional protection, after all residue has

been removed, polish the entire surface with

CERAMA BRYTE

®

Ceramic Cooktop Cleaner and

a paper towel.

The CERAMA BRYTE

®

Ceramic Cooktop

Scraper and all recommended supplies

are available through our Parts Center.

See instructions under “To Order Parts”

section on next page.

NOTE: Do not use a dull or nicked

blade.

La page est en cours de chargement...

GE Monogram ZHU36RSMSS Manuel utilisateur

GE Monogram ZHU36RSMSS Manuel utilisateur

dans d''autres langues

Documents connexes

Autres documents