Oracle SPARC Enterprise M4000 Guide d'installation

Catégorie
Les serveurs
Taper
Guide d'installation

Ce manuel convient également à

SPARC Enterprise M4000/M5000 Servers
Installation Guide
Part No.: Part No.: E26845-01
Part No.: Manual Code: C120-E351-08EN
February 2012
Please
Recycle
Copyright © 2007, 2012, Oracle and/or its affiliates. All rights reserved.
Fujitsu Limited provided technical input and review on portions of this material.
Oracle and/or its affiliates and Fujitsu Limited each own or control intellectual property rights relating to products and technology described in this
document, and such products, technology and this document are protected by copyright laws, patents, and other intellectual property laws and
international treaties.
This document and the product and technology to which it pertains are distributed under licenses restricting their use, copying, distribution, and
decompilation. No part of such product or technology, or of this document, may be reproduced in any form by any means without prior written
authorization of Oracle and/or its affiliates and Fujitsu Limited, and their applicable licensors, if any. The furnishings of this document to you does not
give you any rights or licenses, express or implied, with respect to the product or technology to which it pertains, and this document does not contain or
represent any commitment of any kind on the part of Oracle or Fujitsu Limited, or any affiliate of either of them.
This document and the product and technology described in this document may incorporate third-party intellectual property copyrighted by and/or
licensed from the suppliers to Oracle and/or its affiliates and Fujitsu Limited, including software and font technology.
Per the terms of the GPL or LGPL, a copy of the source code governed by the GPL or LGPL, as applicable, is available upon request by the End User. Please
contact Oracle and/or its affiliates or Fujitsu Limited.
This distribution may include materials developed by third parties.
Parts of the product may be derived from Berkeley BSD systems, licensed from the University of California. UNIX is a registered trademark in the U.S. and
in other countries, exclusively licensed through X/Open Company, Ltd.
Oracle and Java are registered trademarks of Oracle and/or its affiliates. Fujitsu and the Fujitsu logo are registered trademarks of Fujitsu Limited.
All SPARC trademarks are used under license and are registered trademarks of SPARC International, Inc. in the U.S. and other countries. Products bearing
SPARC trademarks are based upon architectures developed by Oracle and/or its affiliates. SPARC64 is a trademark of SPARC International, Inc., used
under license by Fujitsu Microelectronics, Inc. and Fujitsu Limited. Other names may be trademarks of their respective owners.
United States Government Rights - Commercial use. U.S. Government users are subject to the standard government user license agreements of Oracle
and/or its affiliates and Fujitsu Limited and the applicable provisions of the FAR and its supplements.
Disclaimer: The only warranties granted by Oracle and Fujitsu Limited, and/or any affiliate of either of them in connection with this document or any
product or technology described herein are those expressly set forth in the license agreement pursuant to which the product or technology is provided.
EXCEPT AS EXPRESSLY SET FORTH IN SUCH AGREEMENT, ORACLE OR FUJITSU LIMITED, AND/OR THEIR AFFILIATES MAKE NO
REPRESENTATIONS OR WARRANTIES OF ANY KIND (EXPRESS OR IMPLIED) REGARDING SUCH PRODUCT OR TECHNOLOGY OR THIS
DOCUMENT, WHICH ARE ALL PROVIDED AS IS, AND ALL EXPRESS OR IMPLIED CONDITIONS, REPRESENTATIONS AND WARRANTIES,
INCLUDING WITHOUT LIMITATION ANY IMPLIED WARRANTY OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR NON-
INFRINGEMENT, ARE DISCLAIMED, EXCEPT TO THE EXTENT THAT SUCH DISCLAIMERS ARE HELD TO BE LEGALLY INVALID. Unless
otherwise expressly set forth in such agreement, to the extent allowed by applicable law, in no event shall Oracle or Fujitsu Limited, and/or any of their
affiliates have any liability to any third party under any legal theory for any loss of revenues or profits, loss of use or data, or business interruptions, or for
any indirect, special, incidental or consequential damages, even if advised of the possibility of such damages.
DOCUMENTATION IS PROVIDED “AS IS” AND ALL EXPRESS OR IMPLIED CONDITIONS, REPRESENTATIONS AND WARRANTIES,
INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR NON-INFRINGEMENT, ARE
DISCLAIMED, EXCEPT TO THE EXTENT THAT SUCH DISCLAIMERS ARE HELD TO BE LEGALLY INVALID.
Copyright © 2007, 2012, Oracle et/ou ses sociétés affiliées. Tous droits réservés.
Fujitsu Limited a fourni et vérifié des données techniques de certaines parties de ce composant.
Oracle et/ou ses sociétés affiliées et Fujitsu Limited détiennent et contrôlent chacune des droits de propriété intellectuelle relatifs aux produitset
technologies décrits dans ce document. De même, ces produits, technologies et ce document sont protégés par des lois sur le copyright, des brevets,
d’autres lois sur la propriété intellectuelle et des traités internationaux.
Ce document, le produit et les technologies afférents sont exclusivement distribués avec des licences qui en restreignent l’utilisation, la copie, la
distribution et la décompilation. Aucune partie de ce produit, de ces technologies ou de ce document ne peut être reproduite sous quelque forme que ce
soit, par quelque moyen que ce soit, sans l’autorisation écrite préalable d’Oracle et/ou ses sociétés affiliées et de Fujitsu Limited, et de leurs éventuels
bailleurs de licence. Ce document, bien qu’il vous ait été fourni, ne vous confère aucun droit et aucune licence, expresses ou tacites, concernant le produit
ou la technologie auxquels il se rapporte. Par ailleurs, il ne contient ni ne représente aucun engagement, de quelque type que ce soit, de la part d’Oracle ou
de Fujitsu Limited, ou des sociétés affiliées de l’une ou l’autre entité.
Ce document, ainsi que les produits et technologies qu’il décrit, peuvent inclure des droits de propriété intellectuelle de parties tierces protégés par
copyright et/ou cédés sous licence par des fournisseurs à Oracle et/ou ses sociétés affiliées et Fujitsu Limited, y compris des logiciels et des technologies
relatives aux polices de caractères.
Conformément aux conditions de la licence GPL ou LGPL, une copie du code source régi par la licence GPL ou LGPL, selon le cas, est disponible sur
demande par l’Utilisateur final. Veuillez contacter Oracle et/ou ses sociétés affiliées ou Fujitsu Limited.
Cette distribution peut comprendre des composants développés par des parties tierces.
Des parties de ce produit peuvent être dérivées des systèmes Berkeley BSD, distribués sous licence par l’Université de Californie. UNIX est une marque
déposée aux États-Unis et dans d’autres pays, distribuée exclusivement sous licence par X/Open Company, Ltd.
Oracle et Java sont des marques déposées d’Oracle Corporation et/ou de ses sociétés affiliées. Fujitsu et le logo Fujitsu sont des marques déposées de
Fujitsu Limited.
Toutes les marques SPARC sont utilisées sous licence et sont des marques déposées de SPARC International, Inc., aux États-Unis et dans d’autres pays. Les
produits portant la marque SPARC reposent sur des architectures développées par Oracle et/ou ses sociétés affiliées. SPARC64 est une marque de SPARC
International, Inc., utilisée sous licence par Fujitsu Microelectronics, Inc. et Fujitsu Limited. Tout autre nom mentionné peut correspondre à des marques
appartenant à d’autres propriétaires.
United States Government Rights - Commercial use. U.S. Government users are subject to the standard government user license agreements of Oracle
and/or its affiliates and Fujitsu Limited and the applicable provisions of the FAR and its supplements.
Avis de non-responsabilité : les seules garanties octroyées par Oracle et Fujitsu Limited et/ou toute société affiliée de l’une ou l’autre entité en rapport
avec ce document ou tout produit ou toute technologie décrits dans les présentes correspondent aux garanties expressément stipulées dans le contrat de
licence régissant le produit ou la technologie fournis. SAUF MENTION CONTRAIRE EXPRESSÉMENT STIPULÉE DANS CE CONTRAT, ORACLE OU
FUJITSU LIMITED ET LES SOCIÉTÉS AFFILIÉES À L’UNE OU L’AUTRE ENTITÉ REJETTENT TOUTE REPRÉSENTATION OU TOUTE GARANTIE,
QUELLE QU’EN SOIT LA NATURE (EXPRESSE OU IMPLICITE) CONCERNANT CE PRODUIT, CETTE TECHNOLOGIE OU CE DOCUMENT,
LESQUELS SONT FOURNIS EN L’ÉTAT. EN OUTRE, TOUTES LES CONDITIONS, REPRÉSENTATIONS ET GARANTIES EXPRESSES OU TACITES, Y
COMPRIS NOTAMMENT TOUTE GARANTIE IMPLICITE RELATIVE À LA QUALITÉ MARCHANDE, À L’APTITUDE À UNE UTILISATION
PARTICULIÈRE OU À L’ABSENCE DE CONTREFAÇON, SONT EXCLUES, DANS LA MESURE AUTORISÉE PAR LA LOI APPLICABLE. Sauf mention
contraire expressément stipulée dans ce contrat, dans la mesure autorisée par la loi applicable, en aucun cas Oracle ou Fujitsu Limited et/ou l’une ou
l’autre de leurs sociétés affiliées ne sauraient être tenues responsables envers une quelconque partie tierce, sous quelque théorie juridique que ce soit, de
tout manque à gagner ou de perte de profit, de problèmes d’utilisation ou de perte de données, ou d’interruptions d’activités, ou de tout dommage
indirect, spécial, secondaire ou consécutif, même si ces entités ont été préalablement informées d’une telle éventualité.
LA DOCUMENTATION EST FOURNIE « EN L’ÉTAT » ET TOUTE AUTRE CONDITION, DÉCLARATION ET GARANTIE, EXPRESSE OU TACITE, EST
FORMELLEMENT EXCLUE, DANS LA MESURE AUTORISÉE PAR LA LOI EN VIGUEUR, Y COMPRIS NOTAMMENT TOUTE GARANTIE
IMPLICITE RELATIVE À LA QUALITÉ MARCHANDE, À L’APTITUDE À UNE UTILISATION PARTICULIÈRE OU À L’ABSENCE DE
CONTREFAÇON.
v
Contents
Preface ix
1. Installation Overview 1–1
1.1 Installation Workflow 1–1
2. Preparing to Install the Server 2–1
2.1 Safety Precautions 2–1
2.2 Before Installing the Server 2–2
2.2.1 Facility Power 2–2
2.2.1.1 Facility Power Requirements and Characteristics 2–4
2.2.1.2 Grounding 2–7
2.2.2 Cable Connections 2–8
2.2.3 Checking the Installation Location 2–8
2.3 Tools and Equipment 2–9
3. Installing the Server 3–1
3.1 Checking Components 3–1
3.2 Connecting Input Power Cords 3–2
3.2.1 Connecting a UPS Unit 3–3
3.2.2 Verifying the Power Input Connections Before Applying Power 3–
4
vi SPARC Enterprise M4000/M5000 Servers Installation Guide February 2012
3.3 Connecting the Administration Console 3–5
3.3.1 Connecting the Console 3–7
3.3.2 Initializing the XSCF Unit 3–9
3.4 Powering On the Server 3–10
3.4.1 Verifying the Configuration 3–11
3.4.2 Checking the Dual-Power Feed 3–15
3.5 Connecting Additional Peripheral Devices 3–15
4. Connecting the Domains to the Network 4–1
4.1 Overview of Network Configuration 4–1
4.2 Connecting to the Network 4–1
4.3 Verifying the Network Connection 4–2
4.4 Verifying Operation by Running Oracle VTS Software 4–2
A. System Views A–1
A.1 SPARC Enterprise M4000 Server Views A–1
A.2 SPARC Enterprise M5000 Server Views A–5
A.3 Operator Panel Overview A–9
B. Fault Isolation B–1
B.1 Corrective Actions to Common Problems B–1
B.2 Using the Diagnostic Commands B–2
B.2.1 Using the showhardconf Command B–2
B.2.2 Using the showlogs Command B–5
B.2.3 Using the showstatus Command B–6
B.2.4 Using the fmdump Command B–6
B.2.4.1 fmdump -V Command B–6
B.2.4.2 fmdump -e Command B–7
B.2.5 Using the fmadm faulty Command B–7
B.2.5.1 fmadm config Command B–8
Contents vii
B.2.6 Using the fmstat Command B–8
B.3 Traditional Oracle Solaris Diagnostic Commands B–9
B.3.1 Using the iostat Command B–9
B.3.1.1 Options B–9
B.3.2 Using the prtdiag Command B–11
B.3.2.1 Options B–11
B.3.3 Using the prtconf Command B–14
B.3.3.1 Options B–14
B.3.4 Using the netstat Command B–16
B.3.4.1 Options B–16
B.3.5 Using the ping Command B–17
B.3.5.1 Options B–17
B.3.6 Using the ps Command B–18
B.3.6.1 Options B–18
B.3.7 Using the prstat Command B–19
B.3.7.1 Options B–20
viii SPARC Enterprise M4000/M5000 Servers Installation Guide February 2012
ix
Preface
This guide describes how to install and set up the SPARC Enterprise M4000/M5000
servers from Oracle and Fujitsu. This document is intended for authorized service
providers. References herein to the M4000 server or M5000 server are references to
the SPARC Enterprise M4000 or SPARC Enterprise M5000 server.
This preface includes the following sections:
“Audience” on page ix
“Related Documentation” on page x
“Text Conventions” on page xi
“Notes on Safety” on page xii
“Syntax of the Command-Line Interface (CLI)” on page xii
“Documentation Feedback” on page xiii
Audience
This guide is written for experienced system administrators with working
knowledge of computer networks and advanced knowledge of the Oracle Solaris
Operating System (Oracle Solaris OS).
x SPARC Enterprise M4000/M5000 Servers Installation Guide February 2012
Related Documentation
All documents for your server are available online at the following locations.
The following table lists titles of related documents.
Documentation Link
Sun Oracle software-
related manuals
(Oracle Solaris OS,
and so on)
http://www.oracle.com/documentation
Fujitsu documents http://www.fujitsu.com/sparcenterprise/manual/
Oracle M-series
server documents
http://www.oracle.com/technetwork/documentation/sparc-
mseries-servers-252709.html
SPARC Enterprise M4000/M5000 Servers Documents
SPARC Enterprise M4000/M5000 Servers Site Planning Guide
SPARC Enterprise Equipment Rack Mounting Guide
SPARC Enterprise M4000/M5000 Servers Getting Started Guide
*
SPARC Enterprise M4000/M5000 Servers Overview Guide
SPARC Enterprise M3000/M4000/M5000/M8000/M9000 Servers Important Legal and Safety Information
SPARC Enterprise M4000/M5000 Servers Safety and Compliance Manual
External I/O Expansion Unit Safety and Compliance Guide
SPARC Enterprise M4000 Server Unpacking Guide
SPARC Enterprise M5000 Server Unpacking Guide
SPARC Enterprise M4000/M5000 Servers Installation Guide
SPARC Enterprise M4000/M5000 Servers Service Manual
External I/O Expansion Unit Installation and Service Manual
SPARC Enterprise M3000/M4000/M5000/M8000/M9000 Servers Administration Guide
SPARC Enterprise M3000/M4000/M5000/M8000/M9000 Servers XSCF User’s Guide
SPARC Enterprise M3000/M4000/M5000/M8000/M9000 Servers XSCF Reference Manual
SPARC Enterprise M4000/M5000/M8000/M9000 Servers Dynamic Reconfiguration (DR) Users Guide
SPARC Enterprise M4000/M5000/M8000/M9000 Servers Capacity on Demand (COD) Users Guide
Preface xi
Text Conventions
This manual uses the following fonts and symbols to express specific types of
information.
SPARC Enterprise M3000/M4000/M5000/M8000/M9000 Servers Product Notes
SPARC Enterprise M4000/M5000 Servers Product Notes
External I/O Expansion Unit Product Notes
SPARC Enterprise M3000/M4000/M5000/M8000/M9000 Servers Glossary
* All getting started guides are printed documents.
For XCP version 1100 or later
Fonts/symbols Meaning Example
AaBbCc123 What you type, when contrasted
with on-screen computer output.
This font represents the example of
command input in the frame.
XSCF> adduser jsmith
AaBbCc123 The names of commands, files, and
directories; on-screen computer
output.
This font represents the example of
command input in the frame.
XSCF> showuser -P
User Name: jsmith
Privileges: useradm
auditadm
Italic Indicates the name of a reference
manual
See the SPARC Enterprise
M3000/M4000/M5000/M8000/M900
0 Servers XSCF User’s Guide.
" " Indicates names of chapters,
sections, items, buttons, or menus
See Chapter 2, "System Features."
SPARC Enterprise M4000/M5000 Servers Documents
xii SPARC Enterprise M4000/M5000 Servers Installation Guide February 2012
Notes on Safety
Read the following documents thoroughly before using or handling any SPARC
Enterprise M4000/M5000 server:
SPARC Enterprise M3000/M4000/M5000/M8000/M9000 Servers Important Legal and
Safety Information
SPARC Enterprise M4000/M5000 Servers Safety and Compliance Guide
Syntax of the Command-Line Interface
(CLI)
The command syntax is as follows:
A variable that requires input of a value must be put in Italics.
An optional element must be enclosed in [].
A group of options for an optional keyword must be enclosed in [] and delimited
by |.
Preface xiii
Documentation Feedback
If you have any comments or requests regarding this document, go to the following
websites:
For Oracle users:
http://www.oracle.com/goto/docfeedback
Include the title and part number of your document with your feedback.
SPARC Enterprise M4000/M5000 Servers Installation Guide , E26845-01
For Fujitsu users:
http://www.fujitsu.com/global/contact/computing/sparce_index.html
xiv SPARC Enterprise M4000/M5000 Servers Installation Guide February 2012
1-1
CHAPTER
1
Installation Overview
This chapter provides the process for installing the servers.
1.1 Installation Workflow
Installing a server requires the steps in FIGURE 1-1.
1-2 SPARC Enterprise M4000/M5000 Servers Installation Guide February 2012
FIGURE 1-1 Workflow Required for Installation
Checking the cables and environmental conditions.
“Before Installing the Server” on page 2-2
Connecting the console
“Connecting the Administration Console” on page 3-5
Powering on the server
“Powering On the Server” on page 3-10
Installing additional peripheral devices
“Connecting Additional Peripheral Devices” on page 3-15
Setting up the network
“Overview of Network Configuration” on page 4-1
Preparation
Installation and
checking the
power supply
Environmental
Setup
Connecting the power cords
“Connecting Input Power Cords” on page 3-2
2-1
CHAPTER
2
Preparing to Install the Server
This chapter describes the items you are required to check, the environmental
requirements for installation, installation areas, and other related matters. It contains
the following sections:
Section 2.1, “Safety Precautions” on page 2-1
Section 2.2, “Before Installing the Server” on page 2-2
Section 2.3, “Tools and Equipment” on page 2-9
2.1 Safety Precautions
To protect both yourself and the equipment, observe the following precautions when
possible:
Observe the precautions, warnings, and notes on handling shown on the server.
Use an electrostatic discharge (ESD) jack or wrist or foot strap when possible.
Do not block any ventilation holes.
Do not install the server at a location exposed to direct sunlight or near a device
that may become hot.
Do not install the server at a location that has a lot of dust or that is exposed to
corrosive gases or air with a high salt concentration.
Do not install the server at a location exposed to frequent vibrations. Install the
system on a flat and level surface.
Use grounding wires of class 3 or higher. Sharing any grounding wire will lead to
a malfunction.
Do not place cables under the equipment or have cables stretched tight. Do not
disconnect a power cord to the server while its power is on.
Do not place anything on the server or perform any work directly above it.
2-2 SPARC Enterprise M4000/M5000 Servers Installation Guide February 2012
Be careful not to allow the ambient temperature to rise sharply in winter. Such a
sudden temperature change would cause condensation to form inside the product.
Allow for a sufficient warm-up period prior to operation.
Do not install the server near a copy machine, air conditioner, welding machine, or
any other loud equipment.
Do not install the server near any equipment generating lots of electronic noise.
Do not install the system on the same circuits as devices such as equipment
elevators which can cause voltage sags when they are started up.
Take measures to prevent static electricity from being generated at the location.
Confirm that the supply voltage and frequency match the electrical ratings
indicated on the server.
Do not insert anything into any opening in the server. The server contains
high-voltage parts. If a metal object or another conductor were inserted into an
opening in the equipment, it could cause a short circuit that could cause fire,
electric shock, or equipment damage.
For details on maintenance of the server, contact a certified service engineer.
2.2 Before Installing the Server
Before installing the server, you must know the system configuration and obtain all
the prerequisite information for system installation. For instructions, refer to the
SPARC Enterprise M4000/M5000 Servers Site Planning Guide and the guide that came
with the rack.
2.2.1 Facility Power
To prevent catastrophic failures the facility power design must ensure that adequate
redundant power is provided to the system. Electrical work and installations must
comply with applicable local, state, or national electrical codes.
Note The following power numbers are maximums and are based on fully
configured systems. Actual numbers might vary according to your system
configuration.
Chapter 2 Preparing to Install the Server 2-3
TABLE 2-1 Electrical Specifications for the SPARC Enterprise M4000 Server
Parameter Value
Number of power cords 2 (1 power cord per power supply unit)
Redundancy 1 + 1 redundant. Second power supply is
redundant at 200 VAC
Input current Voltage range 100–127 VAC
200–240 VAC
Current, maximum 24.0A at 100–127 VAC (12A per cord)
12.0A at 200–240 VAC (12A per cord)
Current frequency range 50–60 Hz
Power draw (maximum) 1,692 W (2 power cords)
Volt-ampere 1,763 VA
Heat 5,774 BTUs/hr (6,091 kJ/hr)
Power factor 0.98
TABLE 2-2 Electrical Specifications for the SPARC Enterprise M5000 Server
Parameter Value
Number of power cords 4 (1 power cord per power supply unit)
Redundancy 2 + 2 redundant. Second and fourth
power supplies are redundant at 200
VAC
Input current Voltage range 100–127 VAC
200–240 VAC
Current, maximum 48A at 100–127 VAC (12A per cord)
24A at 200–240 VAC (12A per cord 2+2
redundancy)
Current frequency range 50–60 Hz
Power draw (maximum) 3,270 W (4 power cords)
Volt-ampere 3,406 VA
Heat 11,160 BTUs/hr (11,772 kJ/hr)
Power factor 0.98
2-4 SPARC Enterprise M4000/M5000 Servers Installation Guide February 2012
2.2.1.1 Facility Power Requirements and Characteristics
For proper redundancy your facility should have two independent power sources:
Either circuit breakers connected to separate power company utility feeds or UPS
(uninterruptible power system). For power redundancy the power cords should not
be connected to the same facility power source.
If the computer equipment is subjected to repeated power interruptions and
fluctuations, it is susceptible to a higher component failure rate than it would be with
a stable power source. There are two basic configurations:
Power Cords With Redundant PSU Connection (FIGURE 2-1 and FIGURE 2-2)
Power Cords With Dual-power Feed Connection (FIGURE 2-3 and FIGURE 2-4)
Note If more than one power cord of this server is connected directly to the same
facility power source distribution panel, connect the power cords to outlets
independently using one cable per power feed.
Caution Ensure that the circuit breaker is off when installing or removing AC
power cords in order to avoid damage to the PSU or system.
FIGURE 2-1 SPARC Enterprise M4000 Server With Redundant PSU Connection
PSU#0
PSU#1
#0
#1
Circuit
breaker
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72
  • Page 73 73
  • Page 74 74
  • Page 75 75
  • Page 76 76
  • Page 77 77
  • Page 78 78

Oracle SPARC Enterprise M4000 Guide d'installation

Catégorie
Les serveurs
Taper
Guide d'installation
Ce manuel convient également à

dans d''autres langues