TEAC Car Satellite TV System SR-L50 Manuel utilisateur

9A09897100

SR-L50

CD Receiver

OWNER’S MANUAL

MANUEL DU PROPRIÉTAIRE

MANUAL DEL USUARIO

Z

?

ENGLISH

FRANÇAIS ESPAÑOL

2

CAUTION: TO REDUCE THE RISK OF ELECTRIC

SHOCK, DO NOT REMOVE COVER (OR BACK).

NO USER-SERVICEABLE PARTS INSIDE.

REFER SERVICING TO QUALIFIED SERVICE

PERSONNEL.

The lightning flash with arrowhead symbol, within

an equilateral triangle, is intended to alert the user

to the presence of uninsulated “dangerous

voltage” within the product’s enclosure that may be

of sufficient magnitude to constitute a risk of

electric shock to persons.

The exclamation point within an equilateral triangle

is intended to alert the user to the presence of

important operating and maintenance (servicing)

instructions in the literature accompanying the

appliance.

1) Read these instructions.

2) Keep these instructions.

3) Heed all warnings.

4) Follow all instructions.

5) Do not use this apparatus near water.

6) Clean only with dry cloth.

7) Do not block any ventilation openings. Install in

accordance with the manufacturer’s instructions.

8) Do not install near any heat sources such as

radiators, heat registers, stoves, or other

apparatus (including amplifiers) that produce heat.

9) Do not defeat the safety purpose of the polarized

or grounding-type plug. A polarized plug has two

blades with one wider than the other. A grounding

type plug has two blades and a third grounding

prong. The wide blade or the third prong are

provided for your safety. If the provided plug does

not fit into your outlet, consult an electrician for

replacement of the obsolete outlet.

10) Protect the power cord from being walked on or

pinched particularly at plugs, convenience

receptacles, and the point where they exit from

the apparatus.

11) Only use attachments/accessories specified by

the manufacturer.

IMPORTANT SAFETY INSTRUCTIONS

12) Use only with the cart,

stand, tripod, bracket, or

table specified by the

manufacturer, or sold with

the apparatus. When a cart

is used, use caution when

moving the cart/apparatus

combination to avoid injury

from tip-over.

13) Unplug this apparatus during lightning storms or

when unused for long periods of time.

14) Refer all servicing to qualified service personnel.

Servicing is required when the apparatus has

been damaged in any way, such as power-supply

cord or plug is damaged, liquid has been spilled or

objects have fallen into the apparatus, the

apparatus has been exposed to rain or moisture,

does not operate normally, or has been dropped.

<

Do not expose this apparatus to dripps or

splashes.

<

Do not place any objects filled with liquids, such

as vases, on the apparatus.

<

Do not install this apparatus in a confined space

such as a book case or similar unit.

<

The apparatus draws nominal non-operating

power from the AC outlet with its POWER switch in

the off position.

AC POWER CORD CONNECTION

CAUTION:

TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE

OF PLUG TO WIDE SLOT, FULLY INSERT.

CORDE DE CONNEXION CA

ATTENTION:

POUR ÉVITER LES CHOCS ÉLECTRIQUES,

INTRODUIRE LA LAME LA PLUS LARGE DE LA FICHE

DANS LA BORNE CORRESPONDANTE DE LA PRISE

ET POUSSER JUSQU’AU FOND.

For CANADA Pour le CANADA

3

CAUTION

<

DO NOT REMOVE THE PROTECTIVE HOUSING

USING SCREWDRIVER.

<

USE OF CONTROLS OR ADJUSTMENTS OR

PERFORMANCE OF PROCEDURES OTHER THAN

THOSE SPECIFIED HEREIN MAY RESULT IN

HAZARDOUS RADIATION EXPOSURE.

<

IF THIS PRODUCT DEVELOPS TROUBLE, MAKE A

CONTACT WITH OUR SERVICEMAN, AND DO NOT

USE THE PRODUCT IN A TROUBLED STATE.

WARNING : TO PREVENT FIRE OR SHOCK

HAZARD, DO NOT EXPOSE THIS

APPLIANCE TO RAIN OR MOISTURE.

This equipment has been tested and found to comply

with the limits for a Class B digital device, pursuant

to Part 15 of the FCC Rules. These limits are designed

to provide reasonable protection against harmful

interference in a residential installation. This

equipment generates, uses, and can radiate radio

frequency energy and, if not installed and used in

accordance with the instructions, may cause

harmful interference to radio communications.

However, there is no guarantee that interference will

not occur in a particular installation. If this

equipment does cause harmful interference to radio

or television reception, which can be determined by

turning the equipment off and on, the user is

encouraged to try to correct the interference by one

or more of the following measures:

• Reorient or relocate the equipment and/or the

receiving antenna.

• Increase the separation between the equipment

and receiver.

• Connect the equipment into an outlet on a circuit

different from that to which the receiver is

connected.

• Consult the dealer or an experienced radio/TV

technician for help.

CAUTION

Changes or modifications to this equipments not

expressly approved by TEAC CORPORATION for

compliance will void the user’s warranty.

For U.S.A.

Optical pickup :

Type : SLD104AU

Manufacturer : SONY Corporation

Laser output : Less than 0.5 mW on the objective

lens

Wavelength : 760 - 800 nm

This product has been designed and manufactured

according to FDA regulations “title 21, CFR, chapter 1,

subchapter J, based on the Radiation Control for Health

and Safety Act of 1968“, and is classified as class 1

laser product. There is not hazardous invisible laser

radiation during operation because invisible laser

radiation emitted inside of this product is completely

confined in the protective housings.

The label required in this regulation is shown

①

.

For U.S.A.

①

4

Contents

Thank you for choosing TEAC. Read this manual

carefully to get the best performance from this unit.

Before Use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Compact Disc . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Names of Each Control . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Remote Control Unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

CD

Playing a CD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Intro Check . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Repeat Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

Shuffle Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

Programmed Playback . . . . . . . . . . . . . . . . . . . . . . . . . . 15

TUNER

Listening to the Radio . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

How to Preset Stations . . . . . . . . . . . . . . . . . . . . . . . . . . 18

AUX

Listening to the External Sources . . . . . . . . . . . . . . . . . 19

TIMER

Sleep Timer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

Clock Adjustment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

Timer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

IMPORTANT (for U.K.Customers)

DO NOT cut off the mains plug from this equipment. If

the plug fitted is not suitable for the power points in

your home or the cable is too short to reach a power

point, then obtain an appropriate safety approved

extension lead or consult your dealer.

If nonetheless the mains plug is cut off, remove the

fuse and dispose of the plug

immediately, to avoid a

possible shock hazard by inadvertent connection to

the mains supply.

If this product is not provided with a mains plug, or

one has to be fitted, then follow the instructions given

below:

IMPORTANT. DO NOT make any connection to the

larger terminal which is marked with the letter E or by

the safety earth symbol |

or coloured GREEN or

GREEN-and-YELLOW.

The wires in the mains lead on this product are

coloured in accordance with the following code:

BLUE : NEUTRAL

BROWN : LIVE

As these colours may not correspond with the

coloured markings identifying the terminals in your

plug proceed as follows:

The wire which is coloured BLUE must be connected

to the terminal which is marked with the letter N or

coloured BLACK.

The wire which is coloured BROWN must be

connected to the terminal which is marked with the

letter L or coloured RED.

When replacing the fuse only a correctly rated

approved type should be used and be sure to re-fit the

fuse cover.

IF IN DOUBT — CONSULT A COMPETENT

ELECTRICIAN.

VARING: APPARATEN INNEHÅLLER LASER KOMPONENT

MED STRÅLNING ÖVERSTIGANDE KLASS 1.

"ADVARSEL: USYNLIG LASERSTRÅLING VED ÅBNING

NAR SIKKERHEDSAFBRYDERE ER UDE AF FUNKTION.

UNDGÅ UDSAETTELSE FOR STRÅLING"

"VAROITUS! SUOJAKOTELOA EI SAA AVATA. LAITE

SISÄLTÄÄ LASERDIODIN. JOKA LÄHETTÄ

(NÄKYMÄTÖNTÄ) SILMILLE VAARALLISTA

LASERSÄTEILYÄ".

ADVARSEL: USYNLIG LASERBESTRÅLING NÅR DENNE

DELEN ER ÅPEN OG SIKKERHETSSPERREN ER

UTKOBLET UNNGÅ UTSETTELSE FOR STRÅLING.

Obs! nätströmställaren skiljer ej hela apparaten fran

nätet.

ENGLISH

5

Before Use

Read this before operation

<

As the unit may become warm during operation,

always leave sufficient space around the unit for

ventilation.

<

The voltage supplied to the unit should match the

voltage as printed on the rear panel. If you are in

any doubt regarding this matter, consult an

electrician.

<

Choose the installation location of your unit

carefully. Avoid placing it in direct sunlight or close

to a source of heat. Also avoid locations subject to

vibrations and excessive dust, heat, cold or

moisture.

<

Do not place the unit on any high heat-producing

units like your amplifier/receiver.

<

Do not open the cabinet as this might result in

damage to the circuitry or electrical shock. If a

foreign object should get into the set, contact your

dealer or service agency.

<

When removing the power plug from the wall outlet,

always pull directly on the plug, never yank the

cord.

<

To keep the laser pickup clean, do not touch it, and

do not forget to close the disc tray when not using

the CD player.

<

Do not attempt to clean the unit with chemical

solvents as this might damage the finish. Use a

clean, dry cloth.

<

Keep this manual in a safe place for future

reference.

DO NOT MOVE THE UNIT DURING PLAYBACK

During playback, the disc rotates at high speed. Do

NOT lift or move the unit during playback. Doing so

may damage the disc.

WHEN MOVING THIS UNIT

When changing places of installation or packing the

unit for moving, be sure to remove the disc. Then,

press the power switch to turn the power off, and

disconnect the power cord. Moving this unit with the

disc loaded may result in damage to this unit.

Beware of condensation

When the unit (or a disc) is moved from a cold to a

warm place, or used after a sudden temperature

change, there is a danger of condensation; vapor in

the air could condense on the internal mechanism,

making correct operation impossible. To prevent

this, or if this occurs, leave the unit for one or two

hours with the power turned on. The unit will

stabilize at the temperature of its surroundings.

Maintenance

If the surface of the unit gets dirty, wipe with a soft

cloth or use diluted mild soap liquid. Be sure to

remove any excess completely. Do not use thinner,

benzine or alcohol as they may damage the surface

of the unit.

CAUTION

The product shall not be exposed to dripping or

splashing and that no object filled with liquids, such

as vases, shall be placed on the product.

Do not install this equipment in a confined space

such as a book case or similar unit.

Voltage Conversion

(General export models only)

Be sure to remove the power cord from the AC outlet

before repositioning the voltage converter switch.

1. Locate the voltage selector on the bottom of the

unit.

2. Using a flat-bladed screwdriver, set to the

appropriate 230V or 120V position according to

your area.

IN NORTH AMERICA USE ONLY ON 120 V SUPPLY.

6

Compact Disc

< Never use such chemicals as record sprays,

antistatic sprays or fluid, benzine or thinner to clean

the discs. Such chemicals will do irreparable

damage to the disc’s plastic surface.

<

Discs should be returned to their cases after use to

avoid dust and scratches that could cause the laser

pickup to “skip.”

<

Do not expose discs to direct sunlight or high

humidity and temperature for extended periods.

Long exposure to high temperatures will warp the

disc.

<

CD-R discs are more sensitive to the effects of heat

and ultraviolet rays than ordinary CDs. It is

important that they are not stored in a location

where direct sunlight will fall on them, and which is

away from sources of heat such as radiators or

heat-generating electrical devices.

<

Printable CD-R discs aren’t recommended, as the

label side might be sticky and damage the unit.

<

Do not stick papers or protective sheets on the

discs and do not use any protective coating spray.

<

Use a soft oil-based felt-tipped pen to write the

information on the label side. Never use a ball-point

or hard-tipped pen, as this may cause damage to

the recorded side.

<

Never use a stabilizer. Using commercially available

CD stabilizers with this unit will damage the

mechanisms and cause them to malfunction.

<

Do not use irregular shape CDs (octagonal, heart-

shape, etc.). CDs of this sort can damage the unit.

Discs which can be played on this unit:

• Conventional audio CDs bearing the CD-DA logo

on the label:

?

• Properly finalized CD-R discs

Note:

<

Depending on the quality of the disc and/or the

condition of the recording, some CD-R discs may not

be playable.

<

CD-RW discs cannot be played on this unit.

<

Copy-protected discs and other discs which do not

conform to the CD standard may not play back

correctly in this player.

If you use such discs in this unit, TEAC Corporation

and its subsidiaries cannot be responsible for any

consequences or guarantee the quality of

reproduction. If you experience problems with such

non-standard discs, you should contact the

producers of the disc.

< Always place the disc on the disc tray with the label

side uppermost. (Compact discs can be played or

recorded only on one side.)

<

To remove a disc from its storage case, press down

on the center of the case and lift the disc out,

holding it carefully by the edges.

How to remove the disc

How to hold the disc

<

Should the disc become dirty, wipe the surface

radially with a soft, dry cloth.

< If you are in any doubt as to the care and handling

of a CD-R disc, read the precautions supplied with

the disc, or contact the disc manufacturer directly.

ENGLISH

7

Connection

How to connect external sources

< Read instructions of each component you intend to

use with this unit.

<

Make sure to connect:

<

Be sure to insert each plug securely. To prevent

hum and noise, do not bundle the connection cords

with the power cord or speaker cord.

CAUTION: Do not plug the power cord of any

component into AC outlets and do not turn their

POWER switches on until all connections have been

performed.

Connection of FM antenna

(U.S.A./Canada and General export models only)

Connect the lead-type FM antenna to the FM antenna

terminal. Secure it in the location providing optimum

reception.

In an area where FM signals are weak, 75-ohm

unbalanced-type outdoor FM antenna (3 elements or

more) is recommended.

LINE OUT

LR

VCR, DVD PLAYER, ETC.

L

white

red

R

L

R

white

red

white

red

white

red

8

Names of Each Control

TOP

FRONT

REAR

REMOTE CONTROL

A B

I J

QRS

C D E F

NP O

K LG H M

A B

C

Y

J

Z

L

R

O

D

E

S

C

V

W

X

Q

F

M

SIDE

T

U

ENGLISH

9

SNOOZE button

After the on time is reached, use this button to turn

the unit off for 5 minutes.

BASS CONTROL knob

Use this control knob to adjust the bass level.

POWER switch

Press this switch to turn the unit on and off.

MEMORY/CLOCK ADJ button

Use this button to program tracks or to adjust the

clock.

FUNCTION button

Press this button repeatedly to select a function.

Select “CD” to play a disc.

Select “TUNER” to listen to the radio.

Select “AUX” to listen to the external sources

connected to the AUX input jacks.

TUNING button

Press this button up or down to tune in a station.

Remote sensor

Disc tray

Display

VOLUME button

Press this button up or down to adjust the volume.

OPEN/CLOSE button (L)

Use this button to open and close the disc tray.

STOP button (H)

Use this button to stop playback.

PLAY/PAUSE button (y/J)

Use this button to start or pause playback.

SKIP/SEARCH buttons

(.

m

/

,

/)

Press these buttons to skip tracks.

Hold down these buttons to search for a part of a

track.

REPEAT/PRESET button

Use this button to change the repeat mode or select

a preset number and station.

Speakers (stereo)

P

O

N

M

L

K

J

I

H

G

F

E

D

C

B

A

BAND button

Use this button to select FM or AM.

DISPLAY button

Use this button to change the display mode.

TIMER/SLEEP button

Use this button to set the timer or sleep timer.

DIMMER button

Use this button to dim the display and unit lighting.

PHONES

Insert the headphones plug into the PHONES jack,

and adjust the volume.

Both stereo and monaural earphones can be used

with this unit.

Numeric buttons

SHUFFLE button

Use this button to select shuffle playback mode.

INTRO button

Use this button to start the Intro Check.

MUTING button

To cut the sound temporarily, press the MUTING

button. Press the MUTING button again to restore

the sound. If you change the volume during the

muting, the muting will be canceled.

BASS BOOST button

Press this button to switch bass boost on and off.

AUX IN jacks

Connect external sources to these jacks.

FM antenna terminal (with U.S.A./Canada and

General export models)

Connect lead-type FM antenna to this terminal.

FM feeder antenna (with EUROPE model)

Tune in an FM station and extend the lead to find the

best position for the reception. Then fix it to the wall

with thumb tacks or the like.

AC Power Cord

Plug this AC power cord into an AC wall socket.

C

B

A

Z

Y

X

W

V

U

T

S

R

Q

The equipment draws nominal nonoperating

power from the AC outlet with its POWER switch

in the OFF position.

10

The provided Remote Control Unit allows the unit to be

operated from a distance.

When operating the remote control unit, point it

towards the REMOTE SENSOR on the front panel of the

unit.

<

Even if the remote control unit is operated within the

effective range, remote control operation may be

impossible if there are any obstacles between the

unit and the remote control.

<

If the remote control unit is operated near other

appliances which generate infrared rays, or if other

remote control devices using infrared rays are used

near the unit, it may operate incorrectly. Conversely,

the other appliances may operate incorrectly.

Battery Installation

Remove the battery compartment cover.

Insert two “AAA“ (R03, SUM-4) dry batteries. Make

sure that the batteries are inserted with their

positive “+

“ and negative “_“ poles positioned

correctly.

Close the cover.

Battery Replacement

If the distance required between the remote control

unit and main unit decreases, the batteries are

exhausted. In this case replace the batteries with new

ones.

3

2

1

Precautions concerning batteries

< Be sure to insert the batteries with correct positive

“+

“ and negative “_“ polarities.

<

Use batteries of the same type. Never use different

types of batteries together.

<

Rechargeable and non-rechargeable batteries can

be used. Refer to the precautions on their labels.

<

When the remote control unit is not to be used for a

long time (more than a month), remove the batteries

from the remote control unit to prevent them from

leaking. If they leak, wipe away the liquid inside the

battery compartment and replace the batteries with

new ones.

<

Do not heat or disassemble batteries and never

dispose of old batteries by throwing them in a fire.

Remote Control Unit

RESET Switch

In the following cases, function buttons may not

work properly.

1) When the system is damaged by some electrical

shock.

2) When the power is irregular or has electrical

noise.

In these cases, press the RESET switch once or

twice lightly with a pencil or a ball-point pen.

Press the POWER switch to turn the unit ON.

Press the FUNCTION button repeatedly to select

“CD”.

<

When no disc is in the unit, “no dISC” will be

displayed.

Press the OPEN/CLOSE button (L) to open the disc

tray.

Place a disc with the printed label face up.

<

Never place more than one disc in the CD player.

<

The total number of the tracks and total play time of

the disc is displayed.

<

It takes a few seconds for the unit to read the

contents of the disc. No button will work during

reading. Wait until the total number of the tracks

and total play time of the disc is displayed.

4

3

2

1

11

ENGLISH

Playing a CD (1)

Press the OPEN/CLOSE button (L) to close the disc

tray.

Press the PLAY/PAUSE button (y

/J ) to start

playback.

Playback starts from the first track.

When playback of all the tracks has finished, the

unit stops automatically.

6

5

1 2 64 3 5

To stop playback

Press the STOP button (H) to stop playback.

To suspend playback temporarily (pause mode)

Press the PLAY/PAUSE button (y/J). Playback

stops at the current position.

To resume playback, press the PLAY/PAUSE button

(y

/J) again.

To skip to the next or a previous track

During playback, press the SKIP/SEARCH button

(.

m

or

,

/) repeatedly until the desired

track is found. The selected track will be played

from the beginning.

In the stop mode, press the SKIP/SEARCH button

(.

m

or

,

/) repeatedly until the desired

track is found, and press the PLAY/PAUSE button

(y/J) to start playback from the selected track.

<

When the .

m

button is pressed once during

playback, the track being played will be played from

the beginning. To return to the beginning of the

previous track, press the .

m

button twice.

<

During programmed playback, the next or previous

track in the program is played.

C

B

A

12

Playing a CD (2)

CF D

BA

Search for a part of a track

During playback, hold down the SKIP/SEARCH

button (.

m

or

,

/) and release it when

the part you want to listen to is found.

Direct access play

Press the numeric buttons corresponding to the

required track. The player starts from the specified

track directly.

Example 1:

To select the track No.5:

Example 2:

To select the track No.23:

E

D

13

ENGLISH

DISPLAY button

During playback, press this button repeatedly to

change the display mode as follows:

<

Clock display and timer mode display appears for 4

seconds and returns to original display.

<

In the stop mode, remaining time of the disc cannot

be selected.

F

Playing time of the current track

Remaining time of the disc

Clock display

Timer mode display

Intro Check

The Intro Check function allows only the beginning of

each track to be played for 10 seconds.

<

This function is operational both in the stop mode

and during normal playback.

Press the INTRO button.

The INTRO indicator lights in the display, and the Intro

Check will start.

<

To return to the normal playback, press the INTRO

button again.

<

To stop the Intro Check function, press the STOP

button (H

).

<

The Intro Check function also works together with

SHUFFLE or REPEAT ONE/ALL functions.

<

The Intro Check function also works together with

the PROGRAM function.

14

Repeat Playback

Every time the REPEAT/PRESET button is pressed, the

REPEAT indicator lights or blinks, and the mode is

changed as follows :

Repeat one track

Press the REPEAT/PRESET button once during

playback. The repeat indicator blinks.

The track being played will be played repeatedly. If

you press the SKIP/SEARCH button (.m

or

,/

) or the numeric buttons and select

another track, the track you select will be played

repeatedly.

It is also possible to select a track to be repeated in

the stop mode. Press the REPEAT/PRESET button

and then select the track number by pressing the

SKIP/SEARCH button (.m

or ,/) or the

numeric buttons. Press the PLAY/PAUSE button

(y

/J) to start playback.

Repeat all the tracks

All the tracks of the disc will be played repeatedly.

Press the REPEAT/PRESET button twice. The repeat

indicator lights steadily.

<

During program playback, only the programmed

tracks will be played in order repeatedly.

<

If one of the following buttons is pressed, repeat

mode will be canceled:

OPEN/CLOSE button (L

)

STOP button (H

)

POWER switch

FUNCTION button

REPEAT/PRESET

repeat one track

repeat all the tracks

(off)

Shuffle Playback

Tracks can be played randomly.

Press the SHUFFLE button in the stop or play mode.

The tracks will be played randomly.

<

If you press the SKIP/SEARCH button (

,

/)

during shuffle playback, next track will be randomly

selected and played.

If you press the SKIP/SEARCH button (.

m

),

the currently played track will be played from the

beginning.

A track cannot be replayed during shuffle playback.

<

To stop shuffle playback, press the STOP button (H).

<

To cancel the shuffle playback mode, press the

SHUFFLE button.

<

If one of the following buttons is pressed, shuffle

mode will be canceled:

OPEN/CLOSE button (L

)

STOP button (H

)

POWER switch

FUNCTION button

15

ENGLISH

Within 10 seconds, press the MEMORY/CLOCK ADJ

button.

The track is programmed, and “P-02” is displayed.

Repeat steps and to program more tracks.

<

You can program up to 20 tracks.

<

You can also use the front panel buttons to select a

track number. In this case, press the SKIP/SEARCH

button to select a track number and then press the

MEMORY/CLOCK ADJ button while “MEMORY” is

blinking on the display.

<

To cancel the program mode, press the STOP button

(H

).

When the selection of track numbers is completed,

press the PLAY/PAUSE button (y

/J ) to start

program playback.

If the PLAY/PAUSE button (y/J) isn’t pressed

within 10 seconds, the MEMORY indicator will go

off. In that case, press the MEMORY/CLOCK ADJ

button and then press the PLAY/PAUSE button

(y

/J) to start program playback.

The programmed contents are kept in memory even

after the FUNCTION button is pressed or the power

is turned off.

4

32

3

Up to 20 tracks can be programmed in the desired

order.

<

Shuffle playback does not work during program

playback.

<

Insert a disc and select “CD” before beginning

programming.

Press the MEMORY/CLOCK ADJ button in the stop

mode.

“MEMORY” indicator blinks, and “P-01” appears on

the display.

Within 10 seconds, press the numeric buttons to

select a track.

Example 1:

To select the track No.5:

Example 2:

To select the track No.23:

<

If the numeric buttons aren’t pressed within 10

seconds, program mode will be canceled.

2

1

Programmed Playback (1)

2

4

1 3

16

Programmed Playback (2)

To cancel the program playback mode

Press the STOP button (H).

“MEMORY” indicator disappears, but the

programmed contents aren’t lost.

To return to the program mode, press the

MEMORY/CLOCK ADJ button.

To clear program

In the stop mode, do either of the following to clear

the program:

Press the OPEN/CLOSE button (L

) and open it.

Press the MEMORY/CLOCK ADJ button and then the

STOP button (H

).

<

If the unit is disconnected from the power supply,

the programmed contents will be cleared.

To check the programmed order

In the stop mode, press the MEMORY/CLOCK ADJ

button repeatedly to show the track numbers that

have been stored in memory.

To add a track to the end of the program

In the stop mode, press the MEMORY/CLOCK ADJ

button repeatedly until a track number (00) appears

on the display.

Select a track number by pressing the numeric

buttons, and then press the MEMORY/CLOCK ADJ

button.

The track is added to the end of the program.

To overwrite the program

In the stop mode, press the MEMORY/CLOCK ADJ

button repeatedly until the track number to be

changed appears on the display.

Select a new track number by pressing the numeric

buttons, and then press the MEMORY/CLOCK ADJ

button.

MEMORY/CLOCK ADJ

Numeric buttons

STOP

ENGLISH

17

Listening to the Radio

Press the POWER switch to turn the unit ON.

Press the FUNCTION button repeatedly to select

“TUNER”.

Press the BAND button to select FM or AM.

Select the station you want to listen to (auto

selection).

Press the TUNING button up or down until the

frequency display begins to change.

When a station is tuned in, the tuning process will

stop automatically.

<

Press the TUNING button again to stop the auto

selection.

4

3

2

1

Selecting stations which cannot be

tuned automatically (manual

selection).

Press the TUNING button up or down repeatedly

until the station you want to listen to is found.

If the reception is poor

AM broadcast

Turn around the unit to find the best position for AM

stations.

FM broadcast

For a good reception, turn around the antenna so

that you can get the stations clearly.

3

1 2 4

18

How to Preset Stations

In each band, up to 10 stations can be stored in preset

memories.

Press the BAND button to select FM or AM.

Press the TUNING button and tune in a station to be

stored as a preset station.

Press the MEMORY/CLOCK ADJ button.

Within 10 seconds, select a preset channel to store

the station using the REPEAT/PRESET button.

4

3

2

1

Within 10 seconds, press the MEMORY/CLOCK ADJ

button.

<

If you press the numeric buttons (1–0) of the remote

control unit, you can store the station directly. In

this case you don’t have to press the

MEMORY/CLOCK ADJ button.

To store more stations, repeat steps to .

How to select preset stations

Press the BAND button to select FM or AM.

Press the REPEAT/PRESET button repeatedly and

select a preset channel.

If you press the numeric buttons (1–0) of the remote

control unit, you can select a preset channel

directly. To select preset number 10, press “0” of

the remote control unit.

2

1

51

5

41 21

253

ENGLISH

19

The power can be switched off at the specified time.

When the power is on, press the TIMER/SLEEP (or the

SLEEP button of the remote control unit) button

repeatedly until the desired time appears on the

display.

The sleep time can be changed at 10-minute intervals.

TIMER/SLEEP

Sleep Timer

(OFF)

90

80 10

70

Listening to the External Sources

You can connect external sources such as VCR deck

or TV to the AUX input jacks.

Press the POWER switch to turn the unit ON.

Press the FUNCTION button repeatedly to select

“AUX”.

2

1

1 2

20

Clock Adjustment

In the CD mode or the TUNER mode, press the

DISPLAY button to select clock display.

“:” blinks in the clock display.

<

If the AUX is selected or the unit is off, press and

hold the MEMORY/CLOCK ADJ button for 2 or more

seconds, and continue the procedure from step .

<

Press the STOP button to cancel the time setting. (In

the TUNER mode, press the DISPLAY button.)

Within 4 seconds, press and hold the

MEMORY/CLOCK ADJ button for 2 or more seconds.

Press the .m

or ,/ button to select

“12H” or “24H”.

If you select “12H”, “AM” indicator appears in the

morning and “PM” indicator appears after noon.

<

In the TUNER mode, use the TUNING button.

Press the MEMORY/CLOCK ADJ button.

4

3

2

3

1

Press the .mor,/ button to set the

current hour.

<

In the TUNER mode, use the TUNING button.

Press the MEMORY/CLOCK ADJ button.

Press the .m

or,/ button to set the

current minute.

<

In the TUNER mode, use the TUNING button.

Press the MEMORY/CLOCK ADJ button to finish the

time setting mode.

The clock starts from 00 second.

<

If the unit is disconnected from the power supply for

more than 3 minutes, the clock and timer setting will

be reset.

<

If the unit is disconnected for less than 3 minutes

the time displayed may not be correct.

8

7

6

5

MEMORY/CLOCK ADJ

DISPLAY .m ,/

La page est en cours de chargement...

TEAC Car Satellite TV System SR-L50 Manuel utilisateur

Ce manuel convient également à

TEAC Car Satellite TV System SR-L50 Manuel utilisateur

dans d''autres langues

Documents connexes

Autres documents