Reach In Bottle Coolers
Models BB-CN-0005-HC, 0014-HC, 0017-HC, 0026-HC
Items 50038, 50039, 50040, 50041
Instruction Manual
Revised - 04/28/2021
Toll Free: 1-800-465-0234
Fax: 905-607-0234
Email: [email protected]
www.omcan.com
2
Page
-------------------------------------------------------------------------------------------- 3
--------------------------------------------------------------------------- 4 - 5
--------------------------------------------------------------------------- 5 - 6
-------------------------------------------------------------------------- 7
------------------------------------------------------------------------ 7 - 9
----------------------------------------------------------------------------------- 9 - 10
----------------------------------------------------------------------------- 10 - 11
---------------------------------------------------------------------------- 12 - 19
---------------------------------------------------------------------- 20 - 23
------------------------------------------------------------------------------------------- 24 - 26
---------------------------------------------------------------------------- 27
Table of Contents
Section
Disclaimer
General Information
Safety and Warranty
Technical Specications
Installation / Operation
Maintenance
Troubleshooting
Parts Breakdown
Electrical Schematics
Notes
Warranty Registration
Model BB-CN-0005-HC / Model BB-CN-0014-HC
Model BB-CN-0017-HC / Model BB-CN-0026-HC
3
Disclaimer
OMCAN IS NOT RESPONSIBLE FOR
ANY DAMAGES DUE TO WATER LEAKS.
WARRANTY FOR WATER LEAKS IS VOID
IF THE AMBIENT ROOM TEMPERATURE
EXCEEDS 75°F AND 55% RELATIVE HUMIDITY,
AND THE APPLIANCE DRAIN IS NOT
CONNECTED DIRECTLY TO A FLOOR DRAIN.
4
General Information
Omcan Manufacturing and Distributing Company Inc., Food Machinery of America, Inc. dba Omcan
and Omcan Inc. are not responsible for any harm or injury caused due to any person’s improper or
negligent use of this equipment. The product shall only be operated by someone over the age of 18, of
sound mind, and not under the inuence of any drugs or alcohol, who has been trained in the correct
operation of this machine, and is wearing authorized, proper safety clothing. Any modication to the
machine voids any warranty, and may cause harm to individuals using the machine or in the vicinity of
the machine while in operation.
CHECK PACKAGE UPON ARRIVAL
Upon receipt of an Omcan shipment please inspect for external damage. If no damage is evident on the
external packaging, open carton to ensure all ordered items are within the box, and there is no concealed
damage to the machine. If the package has suffered rough handling, bumps or damage (visible or concealed),
please note it on the bill of lading before accepting the delivery and contact Omcan within 24 hours, so we may
initiate a claim with the carrier. A detailed report on the extent of the damage caused to the machine must be
lled out within three days, from the delivery date shown in the shipping documents. Omcan has no recourse
for damaged products that were shipped collect or third party.
Before operating any equipment, always read and familiarize yourself with all operation and safety
instructions.
Omcan would like to thank you for purchasing this machine. It’s of the utmost importance to save
these instructions for future reference. Also save the original box and packaging for shipping the
equipment if servicing or returning of the machine is required.
---------------------------------------------------------------------------------------------------------------------------------------------------
Omcan Fabrication et distribution Companie Limité et Food Machinery d’Amerique, dba Omcan et
Omcan Inc. ne sont pas responsables de tout dommage ou blessure causé du fait que toute personne
ait utilisé cet équipement de façon irrégulière. Le produit ne doit être exploité que par quelqu’un de
plus de 18 ans, saine d’esprit, et pas sous l’inuence d’une drogue ou d’acohol, qui a été formé pour
utiliser cette machine correctement, et est vêtu de vêtements de sécurité approprié. Toute modication
de la machine annule toute garantie, et peut causer un préjudice à des personnes utilisant la machine
ou des personnes à proximité de la machine pendant son fonctionnement.
VÉRIFIEZ LE COLIS DÈS RÉCEPTION
Dès réception d’une expédition d’Omcan veuillez inspecter pour dommages externes. Si aucun dommage
n’est visible sur l’emballage externe, ouvrez le carton an de s’assurer que tous les éléments commandés
sont dans la boîte, et il n’y a aucun dommage dissimulé à la machine. Si le colis n’a subi aucune mauvaises
manipulations, de bosses ou de dommages (visible ou cachée), notez-le sur le bond de livraison avant
d’accepter la livraison et contactez Omcan dans les 24 heures qui suivent, pour que nous puissions engager
une réclamation auprès du transporteur. Un rapport détaillé sur l’étendue des dommages causés à la machine
doit être rempli dans un délai de trois jours, à compter de la date de livraison indiquée dans les documents
d’expédition. Omcan n’a aucun droit de recours pour les produits endommagés qui ont été expédiées ou cueilli
par un tiers transporteur.
5
General Information
Safety and Warranty
Avant d’utiliser n’importe quel équipement, toujours lire et vous familiariser avec toutes les opérations
et les consignes de sécurité.
Omcan voudrais vous remercier d’avoir choisi cette machine. Il est primordial de conserver ces
instructions pour une référence ultérieure. Également conservez la boîte originale et l’emballage pour
l’expédition de l’équipement si l’entretien ou le retour de la machine est nécessaire.
---------------------------------------------------------------------------------------------------------------------------------------------------
Omcan Empresa De Fabricacion Y Distribucion Inc. Y Maquinaria De Alimentos De America, Inc. dba
Omcan y Omcan Inc. no son responsables de ningun daño o perjuicío causado por cualquier persona
inadecuada o el uso descuidado de este equipo. El producto solo podra ser operado por una persona
mayor de 18 años, en su sano juicio y no bajo alguna inuencia de droga o alcohol, y que este ha sido
entrenado en el correcto funcionamiento de esta máquina, y ésta usando ropa apropiada y autorizada.
Cualquier modicación a la máquina anúla la garantía y puede causar daños a las personas usando la
máquina mientras esta en el funcionamiento.
REVISE EL PAQUETE A SU LLEGADA
Tras la recepcion de un envio Omcan favor inspeccionar daños externos. Si no hay daños evidentes en el
empaque exterior, Habra el carton para asegurararse que todos los articulos solicitados ésten dentro de la
caja y no encuentre daños ocultos en la máquina. Si el paquete ha sufrido un manejo de poco cuidado, golpes
o daños (visible o oculto) por favor anote en la factura antes de aceptar la entrega y contacte Omcan dentro
de las 24 horas, de modo que podamos iniciar una reclamación con la compañia. Un informe detallado sobre
los daños causados a la máquina debe ser llenado en el plazo de tres días, desde la fecha de entrega que se
muestra en los documentos de envío. Omcan no tiene ningun recurso por productos dañados que se enviaron
a recoger por terceros.
Antes de utilizar cualquier equipo, siempre lea y familiarizarse con todas las instrucciones de
funcionamiento y seguridad.
Omcan le gustaría darle las gracias por la compra de esta máquina. Es de la mayor importancia para
salvar estas instrucciones para futuras consultas. Además, guarda la caja original y el embalaje para el
envío del equipo si servicio técnico o devolución de la máquina que se requiere.
Please pay close attention to the safety notices in this section. Disregarding these notices may lead to
serious injury and/or damage to the unit.
ATTENTION
• To minimize shock and re hazards, be sure not to overload outlet. Please designate one outlet for your
unit.
6
Safety and Warranty
• Do not use extension cords.
• Do not put your hands under the unit when the units is required to be moved.
• When the unit is not in use for a long period of time, please unplug the unit from the outlet.
• After unplugging the unit, wait at least 10 minutes before re-plugging it. Failure to do so could cause
damage to the compressor.
UNPLUG CORD
• To minimize shock and re hazards, please do not plug or unplug the cord with wet hands.
• During maintenance and cleaning, please unplug the unit.
PROPER GROUNDING REQUIRED
• To minimize shock and re hazards, make sure that the unit is properly grounded.
PROHIBITION
• Do not attempt to remove or repair any component unless instructed by factory.
• Make sure that the unit is not resting on or against the electrical cord and plug.
• To minimize personal injury, do not hang on the doors.
• Do not store any ammable and explosive gas or liquids inside the unit.
• Do not attempt to alter or tamper with the electrical cord.
• Do not set the desired temperature out of the recommended temperature range: (Ref: 32°F - 50°F).
2 YEARS PARTS AND LABOUR / 5 YEARS PARTS ONLY ON COMPRESSOR
WARRANTY
Within the warranty period, contact Omcan Inc. at 1-800-465-0234 to schedule an Omcan authorized
service technician to repair the equipment locally.
Unauthorized maintenance will void the warranty. Warranty covers electrical and part failures, not
improper use.
Please see https://omcan.com/disclaimer for complete info.
WARNING:
The packaging components are classied as normal solid urban waste and can therefore be disposed of
without difculty.
In any case, for suitable recycling, we suggest disposing of the products separately (differentiated
waste) according to the current norms.
DO NOT DISCARD ANY PACKAGING MATERIALS IN THE ENVIRONMENT!
7
Installation / Operation
Technical Specications
IMPORTANT!!!PLEASE READ BEFORE INSTALLATION
• If the unit has recently been transported. Please let unit stand still for a minimum of 24 hours before
plugging it in.
• Make sure that the unit drops down to desired temperature before loading the unit with product.
• Maker sure that there is proper ventilation around the unit in the area where it will operate.
• Make sure all accessories are installed(i.e. shelves, shelf clips, casters) before plugging the unit in.
• Please read through the Operation / Owners Manual in its entirety.
Model BB-CN-0005-HC BB-CN-0014-HC BB-CN-0017-HC BB-CN-0026-HC
Bottle Product
Capacity 4.5 cases 16.5 cases 22 cases 37.5 cases
Can Product
Capacity 6 cases 24 cases 32 cases 55 cases
Power 1/6 HP 1/4+ HP
Net Volume 141 L / 5 cu.ft. 382 L / 13.5 cu.ft. 488 L / 17.23 cu.ft. 580 L / 20.5 cu.ft.
Temperature Range 0.5 - 3.3°C / 33 - 38°F
Max Ambient Temp
Rating 32°C / 90°F
Electrical 115V / 60Hz / 1
Current 2.04A 2.28A 2.6A 4.2A
Number of Lids 12 3
Refrigerant R290
Isolation Material Cyclopentane
Cooling System Ventilated
Defrosting Automatic
Dimensions 28.1” x 26.4” x 34.2”
713 x 670 x 869mm
28” x 49.5” x 34.2”
713 x 1257 x 869mm
28” x 64.5” x 34.2”
713 x 1638 x 869mm
28” x 95.2” x 34.2”
713 x 2418 x 869mm
Interior Dimensions 22.3” x 23” x 15.7”
566 x 583 x 400mm
23” x 45” x 26”
584 x 1143 x 660mm
23” x 60” x 26”
584 x 1524 x 600mm
23” x 91” x 26”
583 x 2314 x 662mm
Packaging
Dimensions
32.6” x 32.6” x 41.8”
830 x 830 x 1060mm
32.8” x 56” x 41.8”
832 x 1422 x 1061mm
32.8” x 70” x 41.8”
832 x 1778 x 1061mm
101” x 32” x 42”
2565 x 813 x 1067mm
Weight 127.9 lbs. / 58 kgs. 181 lbs. / 82 kgs. 253 lbs. / 115 kgs. 341.7 lbs. / 155 kgs.
Packaging Weight 176 lbs. / 80 kgs. 247 lbs. / 112 kgs. 331 lbs. / 150 kgs. 365 lbs. / 166 kgs.
Item Number 50038 50039 50040 50041
8
Installation / Operation
CABINET LOCATION GUIDELINES
• Install the unit on strong and leveled surfaces.
- Unit may make unpleasant noises if surface is uneven.
- Unit may malfunction if surface is uneven.
• Install the unit in an indoor, well-ventilated area.
- Unit performs more efciently in a well-ventilated area.
- For best performance, please maintain clearance of 6” on the back of the unit.
- Outdoor use may cause decreased efciency and damage to the unit.
• Avoid installation in a high humidity and/or dusty area.
- Humidity could cause unit to rust and decrease efciency of the unit.
- Dust collected on condenser coil will cause unit to malfunction. Clean the condenser at least once a
month with a brush or clean cloth.
• Select a location away from heat and moisture-generating equipment.
- High ambient temperature will cause the compressor to overwork, leading to higher energy bills and
gradual breakdown of the unit.
ELECTRICAL
Please ensure that the required voltage of the compressor is being supplied at all times. Low or high voltage
can detrimentally affect the refrigeration unit. All units should be plugged into a grounded and properly-sized
electrical outlet with appropriate overcurrent protection. Please refer to the electrical requirement on the
nameplate. Please make sure that your unit has its own dedicated outlet. Do not use an extension cord.
TEMPERATURE CONTROLS
The temperature controls are factory-set to maintain an average temperature of 38°F in refrigeration. To
maintain a different temperature, simply adjust the control knob located inside the unit. To decrease the
temperature (colder), turn clockwise. To increase the temperature(warmer), turn counter-clockwise – see
diagram.
LOADING PRODUCT
The bin dividers have been installed at the factory for your convenience. Feel free to reposition the dividers
as you see t. To remove the bin dividers, simply push the divider towards the back wall unit the front of the
divider is removed from the positioning holes. To install, position the divider to the desired holes, making sure
that the pressure spring is installed properly.
PAY CLOSE ATTENTION TO THE LOAD LIMIT STICKERS LOCATED ON THE INTERIOR WALLS TO THE
UNIT. DO NOT LOAD PRODUCT ABOVE THE LOAD LIMIT STICKERS OR ABOVE THE TOP CROSS BAR
OF THE BIN DIVIDERS. LOADING PRODUCT ABOVE THE LOAD LIMIT STICKERS WILL HARM THE
PERFORMANCE OF THE UNIT.
9
Maintenance
CLEANING THE CONDENSER COIL
• For efcient operation, it is important that the condenser surface be kept free of dust, dirt, and lint.
• We recommend cleaning the condenser coil and ns at least once per month.
• Clean with a commercial condenser coil cleaner, available from any kitchen equipment retailer. Brush the
condenser ns from top to bottom, not side to side.
• After cleaning, straighten any bent condenser ns with a n comb.
CLEANING THE FAN BLADE AND MOTOR
• If necessary, clean the fan blades and motor with a soft cloth. If it is necessary to wash the fan blades,
cover the fan motor to prevent moisture damage.
CLEANING THE INTERIOR OF UNIT
• When cleaning the cabinet interior, use a solvent of warm water and mild soap.
• Do not use steel wool, caustic soap, abrasive cleaners, or bleach that may damage the stainless steel
Installation / Operation
CAUTION
Setting the temperature control to the coldest
setting may cause the Evaporator coil to freeze
and ice up. This will eventually result in a warmer
Cabinet temperature.
Temperature range from 7 (coldest) to 1
(warmest).
Do not load Product above the top crossbar.
Doing so will harm the Refrigeration.
MECHANICAL CONTROLLER INSTRUCTIONS
OFF: shut the compressor off
Temperature range from 7 (coldest) to 1 (warmest).
CAUTION: Setting the temperature control to the coldest setting may cause the
evaporator coil to freeze and ice up. This will eventually result in a warmer cabinet
temperature.
10
Maintenance
Troubleshooting
surface.
• Wash door gaskets on a regular basis, preferably weekly. Simply remove door gasket from the frame of the
door, soak in warm water and soap for thirty (30) minutes, dry with soft cloth, and replace.
• Check door gaskets for proper seal after they are replaced.
• Periodically remove the shelves and pilasters from the unit and clean them with mild soap and warm water.
To remove the pilasters, rst remove the shelves and shelf brackets. Then, simply lift the pilaster up and
out.
WARNING: Disconnect power cord before cleaning any parts of the unit.
Before requesting any service on your unit, please check the following points. Please note that this guide serve
only as a reference for solutions to common problems.
PROBLEM POSSIBLE CAUSE CORRECTIVE ACTION
Compressor not running. Fuse blown or circuit breaker
tripped.
Replace fuse or reset circuit
breaker.
Power cord unplugged. Plug in power cord.
Thermostat set too high. Set thermostat to lower
Temperature.
Cabinet in defrost cycle. Wait for defrost cycle to nish.
Condensing unit runs for long
periods of time.
Excessive amount of warm product
Placed in cabinet.
Allow adequate time for Product to
cool down.
Prolonged door opening or door
ajar.
Ensure doors are closed when not
in use. Avoid opening doors for
long periods of time.
Door gasket(s) not sealing
properly.
Ensure gaskets are snapped in
Completely. Remove gasket and
Wash with soap and water. Check
condition of gasket and Replace if
necessary.
Dirty condenser coil. Clean the condenser coil.
Evaporator coil iced over. Unplug unit and allow coil to
defrost. Make sure thermostat is
not set too cold. Ensure that door
gasket(s) are sealing properly.
11
Troubleshooting
Cabinet Temperature Is too warm. Thermostat set too warm. Set thermostat to lower
Temperature.
Blocking air ow. Re-arrange product to allow for
Proper air ow. Make sure there
Is at least four inches of clearance
from evaporator.
Excessive amount of warm product
Placed in cabinet.
Allow adequate time for product to
cool down.
Fuse blown or circuit breaker
tripped.
Replace fuse or reset circuit
breaker.
Dirty condenser coil. Clean the condenser coil.
Prolonged door opening or door
ajar.
Ensure doors are closed when not
in use. Avoid opening doors for
long periods of time.
Evaporator coil iced over. (See above)
Cabinet is noisy. Loose part(s). Locate and tighten loose part(s).
Tubing vibration. Ensure tubing is free from contact
with other tubing or components.
For service call 1-800-465-0234.
12
Parts Breakdown
Model BB-CN-0005-HC 50038
13
Item No. Description Position Item No. Description Position Item No. Description Position
AE966 Compressor Unit Installation Board for
50038 1 AE976 Top Board for 50038 16 AA210 Condenser for 50038 30
AB973 Limited Block for Installation Board for
50038 2 AE977 Base Board for Lock for 50038 17 AE905 Outer Drain Pan for 50038 31
AA185 Leveling Feet for 50038 3 AE978 Evaporator Fan Right and Left Bafe
for 50038 18 AE982 Right Rail for Installation Board for
50038 32
AE967 Cabinet Base for 50038 4 AA201 Evaporator Fan Motor Cover for 50038 19 AE983 Fixer for Front Grill for 50038 33
AE968 Front Grill for 50038 5 AE979 Evaporator Fan Bottom Bafe for 50038 20 AA214 Thermostat Water Proof Cover for 50038 34
AE969 Back Grill for 50038 6 AE901 Evaporator Fan Motor for 50038 21 AA124 Power Switch for 50038 35
AE970 Door for 50038 7 AA203 Evaporator for 50038 22 AB109 Thermostat for 50038 36
AE971 Door Gasket for 50038 8 AF836 Evaporator Cover for 50038 23 AE984 Thermostat Installation Cover for 50038 37
62363 Door Handle for 50038 9 AA205 Inner Drain Pipe for 50038 24 AA216 Drain Tube for 50038 38
AA192 Back Limit Block for 50038 10 AE981 Inner Drain Pan for 50038 25 AE985 Left Rail for Installation Board for 50038 39
AE986 Door Limit Block for 50038 11 AF740 Compressor for 50038 26 AA135 Power Cord for 50038 40
AF835 Panel Under Table with Component for
50038 12 - 13 AA207 Condenser Fan Motor Cover for 50038 27 AB594 Filter for 50038 41
AA196 Key for 50038 14 AA208 Condenser Fan Blade for 50038 28 AB595 Filter Fixer for 50038 42
AA197 Lock for 50038 15 AA209 Condenser Fan Motor for 50038 29
Parts Breakdown
Model BB-CN-0005-HC 50038
14
Parts Breakdown
Model BB-CN-0014-HC 50039
15
Item No. Description Position Item No. Description Position Item No. Description Position
AE987 Compressor Unit Installation Board for
50039 1 AE994 Decoration Strip for 50039 18 AA244 Bottle Opener for 50039 35
AE988 Base Board for 50039 2 AE995 Top Board for 50039 19 AF841 Bottle Opener Board for 50039 36
AA185 Leveling Feet for 50039 3 AE996 Left Support for Evaporator Cover for
50039 20 AA246 Bottle Opener Cover for 50039 37
AF005 Front Grill for 50039 4 AF839 Evaporator Cover for 50039 21 AF740 Compressor for 50039 38
AF837 Cabinet Base for 50039 5 AA201 Evaporator Fan Motor Cover for 50039 22 AA247 Condenser Fan Motor for 50039 39
AE990 Door for 50039 6 AE901 Evaporator Fan Motor for 50039 23 AA248 Condenser Fan Blade for 50039 40
62363 Door Handle for 50039 7 AE998 Inner Drain Pan for 50039 24 AA249 Condenser Fan Motor Cover for 50039 41
AE971 Door Gasket for 50039 8 AE999 Right Support for Evaporator Cover for
50039 26 AB594 Filter for 50039 42
AE986 Door Limit Block for 50039 9 AA192 Back Limit Block for 50039 27 AB595 Filter Fixer for 50039 43
AA225 Shelf for 50039 10 AF000 Back Grill for 50039 28 AA216 Drain Tube for 50039 44
AA226 Shelf Spring for 50039 11 AF840 Inner Bafe for 50039 29 AA250 Condenser for 50039 45
AA227 Shelf Cap for 50039 12 AE984 Thermostat Installation Cover for 50039 30 AE905 Outer Drain Pan for 50039 46
AF838 Panel Under Table with Component for
50039 13 - 14 AB109 Thermostat for 50039 31 AA135 Power Cord for 50039 47
AA197 Lock for 50039 15 AA124 Power Switch for 50039 32 AA196 Key for 50039 48
AE977 Base Board for Lock for 50039 16 AA242 Evaporator for 50039 33 AA214 Thermostat Water Proof Cover for 50039 49
AA231 Decoration Cover for 50039 17 AA243 Screw for Bottle Opener Component
for 50039 34 AF004 Thermostat Bafe for 50039 50
Parts Breakdown
Model BB-CN-0014-HC 50039
16
Parts Breakdown
Model BB-CN-0017-HC 50040
17
Item No. Description Position Item No. Description Position Item No. Description Position
AE987 Compressor Unit Installation Board for
50040 1 AF847 Decoration Strip for 50040 18 AA244 Bottle Opener for 50040 35
AE988 Base Board for 50040 2 AF848 Top Board for 50040 19 AF841 Bottle Opener Board for 50040 36
AA185 Leveling Feet for 50040 3 AE996 Left Support for Evaporator Cover for
50040 20 AA246 Bottle Opener Cover for 50040 37
AF005 Front Grill for 50040 4 AF849 Evaporator Cover for 50040 21 AF740 Compressor for 50040 38
AF842 Cabinet Base for 50040 5 AA201 Evaporator Fan Motor Cover for 50040 22 AA247 Condenser Fan Motor for 50040 39
AF843 Door for 50040 6 AE901 Evaporator Fan Motor for 50040 23 AA248 Condenser Fan Blade for 50040 40
AA191 Door Handle for 50040 7 AF850 Inner Drain Pan for 50040 24 AA249 Condenser Fan Motor Cover for 50040 41
AE971 Door Gasket for 50040 8 AE999 Right Support for Evaporator Cover for
50040 26 AB594 Filter for 50040 42
AF844 Door Limit Block for 50040 9 AA192 Back Limit Block for 50040 27 AB595 Filter Fixer for 50040 43
AA225 Shelf for 50040 10 AF000 Back Grill for 50040 28 AA216 Drain Tube for 50040 44
AA226 Shelf Spring for 50040 11 AF840 Inner Bafe for 50040 29 AA250 Condenser for 50040 45
AA227 Shelf Cap for 50040 12 AE984 Thermostat Installation Cover for 50040 30 AE905 Outer Drain Pan for 50040 46
AF845 Panel Under Table with Component for
50040 13 - 14 AB109 Thermostat for 50040 31 AA135 Power Cord for 50040 47
AA197 Lock for 50040 15 AA124 Power Switch for 50040 32 AA196 Key for 50040 48
AE977 Base Board for Lock for 50040 16 AA274 Evaporator for 50040 33 AA214 Thermostat Water Proof Cover for 50040 49
AA231 Decoration Cover for 50040 17 AA243 Screw for Bottle Opener Component
for 50040 34 AF004 Thermostat Bafe for 50040 50
Parts Breakdown
Model BB-CN-0017-HC 50040
18
Parts Breakdown
Model BB-CN-0026-HC 50041
19
Item No. Description Position Item No. Description Position Item No. Description Position
AE987 Compressor Unit Installation Board for
50041 1 AF854 Decoration Strip for 50041 18 AA244 Bottle Opener for 50041 35
AE988 Base Board for 50041 2 AF855 Top Board for 50041 19 AF841 Bottle Opener Board for 50041 36
AA185 Leveling Feet for 50041 3 AE996 Left Support for Evaporator Cover for
50041 20 AA246 Bottle Opener Cover for 50041 37
AF005 Front Grill for 50041 4 AF856 Evaporator Cover for 50041 21 AE876 Compressor for 50041 38
AF851 Cabinet Base for 50041 5 AA201 Evaporator Fan Motor Cover for 50041 22 AA247 Condenser Fan Motor for 50041 39
AF843 Door for 50041 6 AE901 Evaporator Fan Motor for 50041 23 AA248 Condenser Fan Blade for 50041 40
AA191 Door Handle for 50041 7 AF857 Inner Drain Pan for 50041 24 AA249 Condenser Fan Motor Cover for 50041 41
AE971 Door Gasket for 50041 8 AE999 Right Support for Evaporator Cover for
50041 26 AB594 Filter for 50041 42
AE986 Door Limit Block for 50041 9 AA192 Back Limit Block for 50041 27 AB595 Filter Fixer for 50041 43
AA225 Shelf for 50041 10 AF000 Back Grill for 50041 28 AA216 Drain Tube for 50041 44
AA226 Shelf Spring for 50041 11 AF840 Inner Bafe for 50041 29 AA300 Condenser for 50041 45
AA227 Shelf Cap for 50041 12 AE984 Thermostat Installation Cover for 50041 30 AE905 Outer Drain Pan for 50041 46
AF852 Panel Under Table with Component for
50041 13 - 14 AB109 Thermostat for 50041 31 AA135 Power Cord for 50041 47
AA197 Lock for 50041 15 AA124 Power Switch for 50041 32 AA196 Key for 50041 48
AE977 Base Board for Lock for 50041 16 AA298 Evaporator for 50041 33 AA214 Thermostat Water Proof Cover for 50041 49
AA231 Decoration Cover for 50041 17 AA243 Screw for Bottle Opener Component
for 50041 34 AF004 Thermostat Bafe for 50041 50
Parts Breakdown
Model BB-CN-0026-HC 50041
20
Electrical Schematics
Model BB-CN-0005-HC 50038
La page est en cours de chargement...
La page est en cours de chargement...
La page est en cours de chargement...
La page est en cours de chargement...
La page est en cours de chargement...
La page est en cours de chargement...
La page est en cours de chargement...
La page est en cours de chargement...
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
