Fanimation FP8533 Doren Le manuel du propriétaire

Marque: Fanimation

Modèle: FP8533 Doren

Catégorie: Ventilateurs ménagers

Taper: Le manuel du propriétaire

Serial Number

Purchase Date

™

DOREN CEILING FAN

MODEL #FP8533**

Español p. 19

Questions, problems, missing parts? Before returning to your retailer, call our customer

service department at 1-888-567-2055, 8 a.m.-5 p.m., EST, Monday-Friday.

Net Weight 18.52 lbs (8.4 kg)

ATTACH YOUR RECEIPT HERE AND REGISTER YOUR FAN AT FANIMATION.COM

READ AND SAVE THESE INSTRUCTIONS

LIMITED LIFETIME MOTOR WARRANTY - If any part of your fan motor fails, due to a defect in materials or workmanship during 1.

the lifetime of the original purchaser, Fanimation will provide the replacement part free of charge, when the defective fan is returned

to our national service center. Proof of purchase is required. Customer shall be responsible for all costs incurred in the removal or

reinstallation and shipping of the product for repairs or replacement.

ONE YEAR MOTOR LABOR WARRANTY - If your fan motor fails at any time within one year from the original purchase, due to defects 2.

in materials or workmanship, labor to repair the motor will be provided free of charge at our national service center. Purchaser will

be responsible for labor charges after this one-year period. Customer shall be responsible for all costs incurred in the removal or

reinstallation and shipping of the product for repairs or replacement.

If any other part of your fan fails at any time within one year after original purchase, due to a defect in materials or workmanship, we will 3.

repair, or replace, at our option, the defective part free of charge for parts and labor performed at our national service center.

Because of varying climate conditions, this warranty does not cover changes in the finish, including rusting, pitting, corroding, tarnishing, 4.

or peeling.

This

warranty is void and does not apply to damage from improper installation, neglect, accident, misuse, exposure to extremes of heat 5.

or humidity, or as a result of any modification to the original product.

All costs of removal and reinstallation of the fan are the sole responsibility of the owner of the fan and not the store that sold the fan 6.

or Fanimation.

Fanimation reserves the right to modify or discontinue any product at any time and may substitute any part under this warranty.7.

Under no circumstances may a fan be returned without prior authorization from Fanimation. The receipt of purchase must accompany 8.

authorized returns and must be sent freight prepaid to Fanimation. The fan to be returned must be properly packed to avoid damage

in transit; Fanimation will not be responsible for any damage resulting from improper packaging.

It is understood that any repair or replacement is the exclusive remedy available from Fanimation. There is no other expressed or 9.

implied warranty. Fanimation hereby disclaims any and all implied warranties, including, but not limited to those of merchantability and

fitness for a particular purpose to the extent permitted by law. Some states do not allow limitations on implied warranties. Fanimation

will not be liable for incidental, consequential, or special damages arising out of or in conjunction with product use or performance,

except as may otherwise be accorded by law. This warranty gives you special legal rights and you may also have other rights that

vary from state to state.

A certain amount of wobble is normal and should not be considered a problem or a defect.10.

LIMITED LIFETIME WARRANTY

Extends to the original purchaser of a Fanimation Fan

Important Safety Instructions

WARNING: To avoid fire, shock and serious personal injury, follow these instructions.

Table of Contents

Unpacking Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3

(QHUJ\(I¿FLHQW8VHRI&HLOLQJ)DQV ............................4

(OHFWULFDODQG6WUXFWXUDO5HTXLUHPHQWV ..........................4

How to $VVHPEOH YRXU&HLOLQJ)DQ .............................6

How to Hang YRXU&HLOLQJ)DQ .................................8

How to Wire <RXU&HLOLQJ)DQ . . . . . . . . . . 9

+RZWR,QVWDOO<RXU&DQRS\+RXVLQJ . . . . . . . . . . . . . . . . . .10

Read your owner’s manual and safety information before installing your new fan. Review the accompanying assembly diagrams.1.

Before servicing or cleaning unit, switch power off at service panel and lock service panel disconnecting means to prevent power 2.

from being switched on accidentally. When the service disconnecting means cannot be locked, securely fasten a warning device,

such as a tag, to the service panel.

Be careful of the fan and blades when cleaning, painting, or working near the fan. Always turn off the power to the ceiling fan 3.

before servicing.

Do not insert anything into the fan blades while the fan is operating.4.

Do not operate reversing switch until fan blades have come to a complete stop.5.

Additional Safety Instructions

To avoid possible shock, be sure electricity is turned off at the fuse box before wiring, and do not operate fan without blades.1.

All wiring and installation procedures must satisfy National Electrical Codes (ANSI/ NFPA 70) and Local Codes. The ceiling fan 2.

must be grounded as a precaution against possible electrical shock. Electrical installation should be made or approved by a licensed

electrician.

The fan base must be securely mounted and capable of reliably supporting at least 35 lbs. See page 4 of owner’s manual for support 3.

requirements. Consult a qualified electrician if in doubt.

The fan must be mounted with the fan blades at least 7 feet from the floor to prevent accidental contact with the fan blades.4.

Follow the recommended instructions for the proper method of wiring your ceiling fan. If you do not have adequate electrical 5.

This fan is to be used in dry locations only.6.

knowledge or experience, have your fan installed by licensed electrician.

W$51,1* This product is designed to use only those parts supplied with this product and/or accessories designated specifically for

use with this product. Using parts and/or accessories not designated for use with this product could result in personal injury or property

damage.

W$51,1* To reduce the risk of personal injury, do not bend the blade bracket (flange or blade holder) when installing the brackets,

balancing the blades, or cleaning the fan. Do not insert foreign objects in between rotating fan blades.

W$51,1* To Reduce The Risk Of Fire Or Electric Shock. Do Not Use This Fan With Any Solid-State Speed Control Device.

W$51,1* To Reduce The Risk Of Electric Shock. Disconnect The Electrical Supply Circuit To The Fan Before Installing Light Kit.

+RZWR2SHUDWH<RXU&HLOLQJ)DQ ..........................13

Maintenance...............................................14

15Parts List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

([SORGHG9LHZ,OOXVWUDWLRQ. . . . . . . . . . . . . . . . . .

TURXEOHVKRRWLQJ 17

+RZWR&OHDQ<RXU&HLOLQJ)DQ%ODGHV . . . . . . . . . . . . . . . . . . . . . . . . .

How to .......... 10. . . . . . . . .+RZWR$VVHPEOH<RXU&HLOLQJ)DQ%ODGHV

+RZWR$VVHPEOH<RXU/LJKW.LW$VVHPEO\ . . . . . . . . . .11

+RZWR,QVWDOO<RXU5HPRWH&RQWURO. . . . . . . . . . . . . . . . . . . . . . . . . . . .

Unpacking Instructions

For your convenience, check-off each step. As each step is completed, place a check mark. This will ensure that all

VWHSVKDYHEHHQFRPSOHWHGDQGZLOOEHKHOSIXOLQ¿QGLQJ\Rur place should you be interrupted.

NOTE: If you are uncertain of part description, refer to

exploded view illustration.

1. Check to see that you have received the IROORZLQJ

parts:

Motor Assembly 

+DQJHU%UDFNHW$VVHPEO\

'RZQURG+DQJHU%DOO

Assembly

&HLOLQJ&DQRS\

Canopy Screw Cover Assembly

0RWRU&RXSOLQJ&RYHU$VVHPEO\

%ODGH+ROGHU6HW

/LJKW3ODWH$VVHPEO\

/LJKW.LW*ODVV$VVHPEO\

%ODGH6HW

Receiver Unit

Hand-held Remote 

ARNING

Do not install or use fan if any part is damaged or

missing. This product is designed to use only those

parts supplied with this product and/or any accessories

designated specifically for use with this product by

Fanimation. Substitution of parts or accessories not

designated for use with this product by Fanimation could

result in personal injury or property damage. Contact

your retail store for missing or damaged parts.

Light Kit/Glass

Assembly

ardware DJV

(OHYHQÝ3DQ+HDG6FUHZV

(blade holder to fan motor hub)

–

6L[WHHQÝ:DVKHU+HDG

Screws (blade to blade holder)

–

%DJ$VVHPEO\6DIHW\&DEOH–

6L[WHHQ)LEHU:DVKHUV –

– our ire Connectors

ZLWK/RFN:DVKHUV

Hardware BagsCeiling Canopy

Hanger Bracket

Assembly

Downrod/Hanger

Ball Assembly

Motor Assembly Blade Holder Set

Blade Set

Motor Coupling

Cover Assembly

Canopy Screw

Cover Assembly

This manual is designed to make it as easy as possible for you to assemble,

install, operate and maintain your ceiling fan

Tools Needed for Assembly

 ne hillips head screwdriver

 One stepladder

 Four wire connectors

Before assembling your ceiling fan, refer to section

on proper method of wiring your fan (page 9). If you

feel you do not have enough wiring knowledge or

experience, have your fan installed by a licensed

electrician.

WARNING

 One wire stripper

 One

lade

screwdriver

nstalled ire HQJWK

ire i e

p to ft

Materials

LULQJRXWOHW o and o connectors ust e of type

uired y the local code he ini u wire would e a

conductor ZLUHZLWKJURXQG RIWKHIROORZLQJVL e:

NOTE:

Place the parts from the loose parts bags in a small

container to keep them from being lost. If any parts are

missing contact your local retailer.

Light Plate Assembly

Hand-held

Remote

Receiver

Unit

Energy Efficient Use of Ceiling Fans

Ceiling fan performance and energy savings rely

heavily on the proper installation and use of the ceiling

fan. Here are a few tips to ensure efficient product

performance.

Turn Off When Not in the Room

Ceiling fans cool people, not rooms. If the room is

unoccupied, turn off the ceiling fan to save energy.

Using the Ceiling Fan Year Round

Summer Season: Use the ceiling fan in the counter-

clockwise direction. The airflow produced by the ceiling

fan creates a wind-chill effect, making you “feel” cooler.

Select a fan speed that provides a comfortable breeze,

lower speeds consume less energy.

WinterSeason: Reversethe motor andoperatethe ceiling

fan at low speed in the clockwise direction. This produces

a gentle updraft, which forces warm air near the ceiling

down into the occupied space.Remember to adjust your

thermostat when using your ceiling fan - additional energy

and dollar savings could be realized with this simple step!

Electrical and Structural Requirements

Your new ceiling fan will require a grounded electrical

supply line of 120 volts AC, 60 HZ, 15 Amp Circuit.

Electrical code requires use of a fan-rated outlet box to

support the extra weight and motion associated with a

ceiling fan. A fan-rated box will be labeled as such and

typically supports up to a 70lb ceiling fan. Fan-Rated

Outlet Boxes vary in ratings and design. Ensure the

ratings of your ceiling fan outlet box meet the

requirements for the ceiling fan being installed. Figure 1,

Figure 2 and Figure 3 depicts different structural

configurations that may be used for mounting the

outlet box.

Low-profile use (Figure 1)

A 1

2-in.-deep pancake box is meant to be screwed to a

joist or block. It’s used if only one cable is coming into

the box. It is also available in a saddle-mount

configuration.

CEILING

2" x 4"

CEILING JOIST

OUTLET BOX

Figure 1

Figure 2

2" x 4"

CEILING JOIST

CEILING

OUTLET BOX

Deep-profile use (Figure 2)

A 2-1

-in.-deep box can be attached to blocking

between joists and is roomy enough to handle more

than one cable.

Choosing the Appropriate Mounting Location

Ceiling fans should be installed, or mounted, in the middle

of the room and at least 7 feet from floor to the blade and

18 inches from wall to the blade. If ceiling height allows,

install the fan 8 - 9 feet from floor to the blade for optimal

airflow. Consult your Fanimation Retailer for optional

mounting accessories.

Electrical and Structural Requirements (Continued)

If your fan is to replace an existing light fixture, turn

electricity off at the main fuse box at this time and

remove the existing light fixture.

Turning off wall switch is not sufficient. To avoid

possible electrical shock, be sure electricity is

turned off at the main fuse box before wiring. All

wiring must be in accordance with National and

Local codes and the ceiling fan must be properly

grounded as a precaution against possible electrical

shock.

WARNING

To reduce the risk of fire, electrical shock, or

personal injury, mount fan to outlet box marked

acceptable for fan support of 15.88 kg (35 lbs) or less.

Use screws supplied with outlet box. Most outlet

boxes commonly used for support of light fixtures

are not acceptable for fan support and may need to

be replaced. Consult a qualified electrician if

in doubt.

WARNING

Brace use (Figure 3)

Paired with a deep box, this hanger is meant to span

between two joists and takes the place of wooden

blocking.

To avoid fire or shock, follow all wiring instructions

carefully. Any electrical work not described in these

instructions should be done or approved by a

licensed electrician.

WARNING

Figure 3

CEILING JOIST

CEILING

OUTLET BOX

How to Assemble Your Ceiling Fan

1. Remove the hanger ball portion from the downrod/

hanger ball assembly by loosening the set screw in the

hanger ball until the ball falls freely down the downrod.

Remove the pin from the downrod, then remove the

hanger ball. Retain the pin and hanger ball for reinstal-

lation in Step 6. (Figure 1)

Downrod

Set Screw

Hanger Ball

Figure 1

Figure 2

3. Loosen the two set screws and nuts in the downrod

support of the motor assembly. Route the black, white,

blue wires and safety cable through the downrod.

(Figure 3)

4. Slide downrod into the downrod support on top of

the motor. Install the clevis pin by aligning the holes

in the downrod support with holes in the downrod.

Secure clevis pin with hairpin clip. Tighten the two set

screws with nuts in the downrod support. (Figure 4)

WARNING

It is critical that the clevis pin in the downrod support

is properly installed and the set screws and nuts are

securely tightened. Failure to do so could result in

the fan falling.

2. Remove the hairpin clip and clevis pin from the

bottom of the downrod. Retain the pin and clip for

reinstallation in Step 4. (Figure 2)

Hairpin

Clip

Clevis Pin

Figure 4

Figure 5

5. Route wires and safety cable through motor coupling

cover, canopy screw cover and ceiling canopy. (Figure 5)

Motor Coupling

Cover

Ceiling Canopy

Canopy Screw

Cover

Downrod

Hairpin Clip

Set Screws and

Locking Nuts (2)

Downrod

Set Screws

and Nuts (2)

Black, White, Blue wires

and Safety Cable

Figure 3

How to Assemble Your Ceiling Fan (continued)

NOTE:

All set screws must be checked, and retightened

where necessary, before installation.

Figure 6

Figure 7

7. Cut off excess lead wire approximately 6 to 9 inches

above the top of the downrod. Strip insulation off

1/2 inch from the end of each lead wire. (Figure 7)

6. Reinstall the hanger ball on the downrod as follows.

Route the black, white and blue wires and safety cable

through the hanger ball. Position the pin through the two

holes in the downrod and align the hanger ball so the pin

is captured in the groove in the top of the hanger ball.

Pull the hanger ball up tight against the pin. Securely

tighten the set screw in the hanger ball. A loose set

screw could create fan wobble. (Figure 6)

1. Using the

»8Ý x 2Ý lag bolt and flat washer, attach

safety cable to ceiling joist or wood structural member.

The lag bolt will pass through the flat washer, safety

cable loop, and into the building structure (Figure 3).

<RXZLOOILUVWGULOODóÝSLORWKROHLQWRWKHEXLOGLQJVWUXcture

to prevent splitting or cracking.

2. Securely attach the hanger bracket to ceiling junction

box acceptable for ceiling fan support..

NOTE: Ceiling support cable cannot be secured to

junction box only, it must be directly secured to ceiling

joist or structural member using the ǪÝ x 2Ý lag bolt and

À at washer. (Figure 3)

3. Make sure the electrical supply wires, including the

hanger bracket grounding wire and safety cable are

pulled through the downrod, between the hanger bracket

and the junction box so that electrical connections can be

made later.

Carefully lift the fan and seat the downrod/hanger ball

assembly on the hanger bracket that was just attached to

the ceiling joist. Be sure the groove in the ball is lined up

with tab on the hanger bracket. (Figure 4)

5. Attach the safety cable to ceiling support cable. Slide

cable clamp onto safety cable (from fan). Place the end

of cable through the loop of ceiling support cable. Pull as

much cable through loop as possible. Feed end of cable

into clamp hole and firmly tighten screw (Figure 4). Cut

off excess safety cable.

ÝÝ r

ÝÝ

À r.

WARNING

The fan must be hung with at least 7´ of clearance from

floor to blades. (Figure 2)

WARNING

The outlet box must be securely anchored and capable

of withstanding a load of at least 35 lbs. Hanger bracket

must seat

rmly against outlet box. If the outlet box is

recessed, remove wallboard until bracket contacts box.

If bracket and/or outlet box are not securely attached,

the fan could wobble or fall.

CAUTION

Do not connect fan blades until the fan is completely

installed. Hanging fan with blades connected may result

in damage to the fan blades.

WARNING

To avoid possible electrical shock, be sure electricity is

turned off at the main fuse box before hanging. (Figure 1)

NOTE: If you are not sure if the outlet box is grounded,

contact a licensed electrician for advice, as it must be

grounded for safe operation.

WARNING

Failure to seat tab in groove could cause damage to

electrical wires and possible shock or fire hazard.

How to Hang Your Ceiling Fan

Figure 2

%'+.+0)

(.114

01.'55

6*#0

(''6

Figure 1

/#+0(75'$1:

911&/'/$'4

r:r#2241:

%'+.+0),1+56

%'+.+0)

,70%6+10 

$1:

*#0)'4$4#%-'6

%'+.+0)

5722146

%#$.'

Figure 3

: 

HARDWARE USED:

Figure 4

6#$

016'5722.;9+4'5#0&(#0

9+4'51/+66'&(14%.#4+6;

&19041&*#0)'4

$#..#55'/$.;

#66#%*5#('6;

%#$.'61%'+.+0)

5722146%#$.'

%'+.+0)5722146

%#$.'%.#/2

95%4'9

To avoid possible shock, do not pinch wires

between the downrod/hanger ball assembly and the

hanger bracket.

WARNING

How to Wire Your Ceiling Fan

MAIN FUSE BOX

Figure 2

Figure 1

Figure 4

Green Wire

from Supply

(Ground)

White Wire

from Supply

White Wire

from Receiver

Green Wire

from Hanger

Bracket (Ground)

Green Wire

from Hanger

Ball (Ground)

Listed

Outlet Box

Household

Supply

Black Wire

from Supply

Black Wire

from Receiver

Receiver

Figure 3

x 6WIRE

CONNECTORS

HARDWARE USED:

ue to

k t

hit

all

To avoid possible electrical shock, be sure electricity

is turned off at the main fuse box before wiring

(Figure 2).

WARNING

NOTE:

If you are not sure if the outlet box is

grounded, contact a licensed electrician for advice, as

it must be grounded for safe operation.

NOTE:

If you feel that you do not have enough electrical

wiring knowledge or experience, have your fan installed

by a licensed electrician.

Check to see that all connections are tight, including

ground, and that no bare wire is visible at the wire

connectors except for the ground wire. Do not

operate fan until the blades are in place. Noise and

motor damage could result.

WARNING

3. After connections have been made, turn leads

upward and carefully push leads into the outlet

box, with the white and green leads to one side

of the box and the black leads to the other side.

(Figure 4)

CAUTION: INCORRECT WIRE CONNECTION WILL

DAMAGE THIS RECEIVER.

2. Connect green wires from hanger bracket and

downrod to bare (ground) wire using wire connector.

Connect black wire from receiver unit marked “AC IN L”

to black supply wire using wire connector. Connect white

wire from receiver unit marked “AC IN N” to white supply

wire using wire connector. Connect white wire from

receiver unit marked “TO MOTOR N” to white wire from

fan using wire connector supplied with receiver unit.

Connect black wire from receiver unit marked “TO

MOTOR L” to black wire from fan using wire connector

supplied with receiver unit. Lastly, connect blue wire

from receiver unit to the blue fan light wire using wire

connector supplied with receiver unit. (Figure 3)

1. To set the code on receiver unit, slide dip switches to

the same positions as set on the remote. (Figure 1)

NOTE: The remote unit has 32 different code

combinations. To prevent possible interference from or to

other remote units, simply change the combination code

in the remote and receiver.

NOTE: Factory setting is all up. Do not use this position.

Dip Switch

ON DIP

1 2 3 4 5

Receiver Unit

How to Assemble Your Ceiling Fan Blades

How to Install Your Canopy Housing

2. Securely attach and tighten the canopy screw cover

over the shoulder screws in the hanger bracket utilizing

the keyslot twist-lock feature. (Figure 2)

1. Remove one of the two shoulder screws in the

hanger bracket. Loosen the second shoulder screw

without fully removing it. Assemble canopy by

rotating key slot in canopy over shoulder screw in

hanger bracket. Tighten shoulder screw. Fully

assemble and tighten second shoulder screw that

was previously removed. (Figure 1)

WARNING

To avoid possible fire or shock, make sure that the

electrical wires are completely inside the canopy

housing and not pinched between the housing and the

ceiling.

NOTE: This step is applicable after the neccessary wiring is completed.

Ceiling Canopy

HARDWARE USED:

x 15

FIBER WASHERS

WASHER HEAD

SCREWS

3/16ß-24

Position the blade over the blade holder with

threaded posts showing. Make sure the bottom edge

of the blade is fully seated against the blade holder.

:LWKDSKLOOLSVVFUHZGULYHUWLJKWHQÝZDVKHU

head screws and fiber washers to secure the blade

to the blade holder. (Figure 2)

Do not connect fan blades until the fan is completely

install

ed. Installing the fan with blades assembled

may result in damage to the fan blades.

CAUTION

1. Remove and discard the five rubber motor

stops/screws from the motor assembly. (Figure 1)

Figure 1

Blade

Blade Holder

Figure 2

Ý

Washer Head Screws

and Fiber Washers

(3 each per blade)

Figure 1

Canopy Screw

Cover

Figure 2

Motor Stops

Motor

Assembly

How to Assemble Your Light Kit

How to Assemble Your Ceiling Fan Blades (Continued)

NOTE: Periodically check blade holder hardware and

resecure if necessary.

3. Secure the blade holders to the bottom of the motor

DVVHPEO\XVLQJWKHÝVFUHZVIURPWKHKDUGZDUHEDJ

(Figure 3)

To reduce the risk of personal injury, do not bend the

blade holders when installing, balancing the blades

or cleaning the fan. Do not insert foreign objects in

between the rotating blades.

WARNING

To reduce the risk of electric shock, disconnect the

electrical supply circult to the fan before installing

light kit.

CAUTION

Blade Holder

SHUDVVHPEO\

HARDWARE USED:

x 10

SCREWS

Figure 3

6FUHZV

Figure 1

Figure 2

1. 5HPRYHRQHRIWKHWKUHHVFUHZVLQWKHVXSSRUW

EUDFNHWDQGUHWDLQWKHVFUHZIRUODWHU6OLJKWO\ORRVHQ

WKHUHPDLQLQJWZRVFUHZV(Figure 1)

Motor

Assembly

Motor

Assembly

Light Plate

Assembly

2.$VVHPEOHWKHOLJKWSODWHDVVHPEO\WRWKHDGDSWRU

SODWHRIWKHPRWRUDVVHPEO\XVLQJWKHWZRNH\VORWVLQ

WKHOLJKWSODWHDVVHPEO\5HSODFHWKHWKLUGVFUHZDQG

VHFXUHDOOWKUHHVFUHZV)LJXUH

How to Assemble Your Light Kit Continued)

Light Plate

Assembly

Light Plate

Assembly

Figure 3

3. Remove one of the three screws in the light plate

assembly and retain the screw for later. Slightly

loosen the remaining two screws. (Figure 3)

4. Connect the 2 pin connectors from the light kit

to the 2 pin connectors from motor assembly. (Figure 4)

5. Assemble the light kit to the light plate assembly

using the two key slots. Replace the screw removed in

Step 3 and secure all three screws. (Figure 5)

Light Kit

Motor

Assembly

Figure 4

Figure 5

Figure 6

Glass

The light source is designed for this specific

application and can overheat if serviced by untrained

personnel. If any servicing is required, the product

should be returned to an authorized service facility

for examination or repair.

CAUTION

6. Assemble the glass to the light kit by twisting

in a clockwise direction. Do not overtighten. (Figure 6)

How to Operate Your Ceiling Fan

Figure 1

Figure 2

Figure 4

MAIN FUSE BOX

For illustrative purposes only-not

intended to cover all types of controls

2. Restore electrical power to the outlet box by turning

the electricity on at the main fuse box. (Figure 2)

Check to see that all connections are tight, including

ground, and that no bare wire is visible at the wire

connectors, except for the ground wire. Do not

operate fan until the blades are in place. Noise and

fan damage could result.

WARNING

1. IMPORTANT: Using a full range dimmer switch

(not included) to control fan speed will damage the fan.

To reduce the risk of fire or electrical shock, do not use

a full range dimmer switch to control the fan speed.

(Figure 1)

WARNING

Do not operate this fan with a variable (Rheostat) wall

controller or dimmer switch. Doing so could result in

damage to the ceiling fan's remote control unit.

3. To make fan operational, install 23A/12V battery

(included) in hand-held remote transmitter, with fan

power off. Then follow the remote code setting

process. (If not used for long periods of time, remove

battery toprevent damage to transmitter). Store the

remote away from excessive heat or humidly.

(Figure 3)

NOTE: The remote unit has 32 different code

combinations. To prevent possible interference from or

to other remote units, simply change the combination

code in the remote and receiver.

4. To set the remote code with a small screwdriver or

ball point pen (neither included), slide dip switches

firmly up or down. (Figure 4)

NOTE: Factory setting is all up. Do not use this

position.

Dip Switch

ON DIP

1 2 3 4 5

Remote

12V 23A

Battery (1 pcs)

Figure 3

5. Remote functions: (Figure 5)

,QGLFDWRU/('OLJKWIDQVSHHG

EXWWRQ7XUQVIDQRII

)DQ6SHHG

Turns fan on and turns speed up.

Turns fan on and turns speed down.

/LJKWEXWWRQ7XUQVOLJKWRQDQGRII

Increases light output level.

Decreases light output level.

Tap and the fan and light will turn off after

3 hours.

Tap and the fan and light will turn off after

6 hours.

Tap and the fan and light will turn off after

1 hour.

Figure 5

How to Install Your Remote Control

Figure 1

1. Installing Wall Holder: (Figure 1)

Attach wall holder using the two provided screws.

How to Operate Your Ceiling Fan (continued)

Maintenance

How to Clean Your Ceiling Fan Blades

1. ylnoehtsinafgniliecwenruoyfogninaelccidoireP

maintenance that is needed.

When cleaning, use only a soft brush or lint free cloth

.hsinif ehtgnihctarcsdiovaot

Abrasive cleaning agents are not required and should

be avoided to prevent damage to finish.

Periodic light dusting of the blades is recommended.

A feather duster will work best.

Avoid using water, cleansers, or harsh rags, which can

warp and ruin the blades.

CAUTION

Do not use solvents when cleaning your ceiling fan. It

could damage the motor or the blades and create the

possibility of electrical shock.

RECOMENDED: Periodically check that the blade holders to motor hub screws are secure and tight.

Season

Summer

Winter

Rotation Direction Switch Position

Clockwise

Counterclockwise

Reverse Switch Information

Right

Left

6. If airflow is desired in the opposite direction, turn

the fan off and wait for the blades to stop turning.

Then slide the reverse switch on top of motor

assembly to the opposite position and turn fan on

again. (Figure 6 )

Reversing

Switch

Figure 6

HOW TO ORDER REPAIR PARTS

When ordering repair parts, always give the following information:

 Part Number

 Part Description

 Fan Model Number

Contact your retail store for repair parts.

Before discarding packaging material, be certain all parts have been removed.

** Insert FINISH CODES (Refer to fan model number located on downrod support)

Parts List

Model No. FP8533**

Reference # Part #

ADR1-45**

PG155**

AP1115**

Motor Coupling Cover

APPAC2604**

AMA8533**

Blade Holder Set

Motor Assembly

AP853305**Blade Set

AP853303BL

AP255BL

AP260**

Light Plate Assembly

HDWFP8533**

AP853304Light Kit/Glass Assembly

RCCA05005001

TR500

Receiver Unit

Hand-Held Remote

—

——

—

Hanger Bracket Assembly

Hanger Ball/Downrod Assembly

Ceiling Canopy

Canopy Screw Cover Assembly

Wire Connectors (4)

Bag Assembly Safety Cable

Loose Hardware Bag:

Blade Mounting Hardware Bag:

:DVKHU+HDG6FUHZVÝ

Fiber Washer (16)

Blade Holder Mounting Hardware Bag:

3DQ+HDG6FUHZÝZLWK/RFN:DVKHU

Description

Model FP8533**

Exploded-View Illustration

NOTE: The illustration shown is not to scale or its actual con guration may vary.

Product/parts are subject to change without notice.

Figure 1

DOREN

™

1112

4. Replace with fresh battery.

4. Dead battery in remote control.

Troubleshooting

For your own safety turn off power at fuse box or circuit breaker before trouble shooting your fan.

WARNING

Trouble Probable Cause Suggested Remedy

1.FAN WILL

NOT START

1. Check main and branch circuit fuses

or circuit breakers.

2. Check line wire connections to fan

and switch wire connections in the

switch housings.

CAUTION: Make sure main power is

turned off !

1. Fuse or circuit breaker blown.

2. Loose power line connections to the

fan, or loose switch wire connections

in the switch housing.

2.FAN SOUNDS NOISY

1. Attach blades to fan before operating.

2. Check to make sure all screws in

motor housing are snug (not over-

tight).

3. Check to make sure the screws which

attach the fan blade holders to the

motor flywheel are tight.

4. Check to make sure wire connectors

in switch housing are not rattling

against each other or against the

interior wall of the switch housing.

CAUTION: Make sure main power is

turned off !

5. Tighten screws securely.

1. Blades not attached to fan.

2. Loose screws in motor housing.

3. Screws securing fan blade holders to

motor flywheel are loose.

4. Wire connectors inside housing

rattling.

5. Screws holding blades to blade

holders are loose.

3.FAN WOBBLES

EXCESSIVELY

1. Tighten both setscrews securely in

downrod support.

2. Tighten the setscrew in the downrod/

hanger ball assembly.

3. Check to be sure screws which attach

the fan blade holders to the flywheel

are tight.

4. Check to be sure the fan blade

holders seat firmly and uniformly to

the surface of the motor housing.

If holders are seated incorrectly,

loosen the screws and retighten.

5. Tighten the hanger bracket screws to

the outlet box, and secure outlet box.

6. Balance blades using balance kit

provided in hardware bag.

1. Setscrew in downrod support is loose.

2. Setscrew in downrod/hanger ball

assembly is loose.

3. Screws securing fan blade holders to

flywheel are loose.

4. Blade holders not seated properly.

5. Hanger bracket and/or ceiling outlet

box is not securely fastened.

6. Fan blades out of balance.

4.NOT ENOUGH AIR

MOVEMENT

1. If possible, consider using a longer

downrod (not included, you can buy

the longer downrod from

fanimation.com).

6. Lower housing support set screw

loose.

6. Tighten set screw securely.

3. Make sure reversing switch position is

all the way to one side.

3. Reversing switch in neutral position.

2019/01 V.01

10983 Bennett Parkway

Zionsville, IN 46077

Phone: 888-567-2055

Outside U.S.: 317-733-4113

FANIMATION.COM

FAX: 866-482-5215

MODELO #FP8533**

™

VENTILADOR DE TECHO DOREN

ADJUNTE SU RECIBO AQUÍ Y REGISTRE SU VENTILADOR EN FANIMATION.COM

LEA Y GUARDE ESTAS INSTRUCCIONES

Peso neto 8.4 kg (18.52 lbs)

Preguntas, problemas, piezas faltantes? Antes de volver a la tienda, llame a nuestro

Departamento de Servicio al Cliente al 1-888-567-2055, 8 a.m. - 5 pm, hora del Este, de

lunes - viernes.

Número de serie

Fecha de compra

GARANTÍA LIMITADA DE POR VIDA DEL MOTOR - Si se produjera una falla en alguna de las partes del motor de su ventilador debido 1.

a un defecto en los materiales o en la fabricación durante el tiempo de vida del comprador original, Fanimation proporcionará la pieza de

repuesto sin cargo una vez que el ventilador defectuoso sea devuelto a nuestro centro de servicios nacional. Se requiere comprobante de

venta. El cliente se hará responsable de todos los gastos de remoción o reinstalación y envío del producto para reparaciones o sustitución.

GARANTÍA DE MANO DE OBRA DEL MOTOR POR UN AÑO - Si el motor de su ventilador fallara antes de cumplirse un año a partir del2.

momento de su compra original debido a defectos en los materiales o en la fabricación, se le efectuará la reparación del mismo sin cargo

en nuestro centro de servicios nacional. El comprador se hará responsable de los gastos de mano de obra luego del período de un año.

El cliente se hará responsable de todos los gastos de remoción o reinstalación y envío del producto parareparaciones o sustitución.

Si otra pieza del ventilador fallara dentro del período de un año a partir de la fecha de compra original debido a un defecto en los 3.

materiales o en la fabricación, repararemos o sustituiremos, según creamos conveniente, la pieza defectuosa sin cargo alguno en

nuestro centro de servicios nacional.

Debido a las diversas condiciones climáticas, esta garantía no cubre cambios en la terminación, incluidos oxidación, corrosión, 4.

falta de brillo o peladuras.

Esta garantía es nula y no se aplica a daños por instalación incorrecta, negligencia, accidentes, uso indebido, exposición al calor o 5.

a la humedad en exceso, o como resultado de cualquier modificación realizada al producto original.

Todos los gastos de remoción y reinstalación del ventilador son responsabilidad exclusiva del propietario, y no de la tienda que 6.

vendió el ventilador ni de Fanimation.

Fanimation se reserva el derecho de modificar o discontinuar un producto en cualquier momento, o sustituir cualquier pieza según 7.

lo establecido por esta garantía.

En ningún caso se podrá devolver un ventilador sin previa autorización por parte de Fanimation. Las devoluciones autorizadas 8.

deberán ir acompañadas del recibo de venta y deberán enviarse a Fanimation, previo pago del flete. El ventilador que se devuelva

deberá estar embalado en forma adecuada a fin de evitar daños durante el transporte. Fanimation no se hará responsable de los

daños que resulten del embalaje incorrecto del producto.

Se entiende que las reparaciones y las sustituciones son el único recurso disponible de Fanimation. No existe ninguna otra 9.

garantía expresa o implícita. Por la presente, Fanimation niega todas las garantías implícitas, que incluyen, entre otras, la

comerciabilidad y la aptitud para determinado fin hasta donde la ley lo permita. Algunos estados no permiten limitaciones sobre las

garantías implícitas. Fanimation no se hará responsable por daños accidentales, resultantes o especiales derivados del uso o el

rendimiento del producto o en conjunción con éste, excepto en los casos en los que la ley así lo disponga. Esta garantía le otorga

derechos legales especiales y es posible que también goce de otros derechos que pueden variar según el estado.

Es normal que se produzca un cierto movimiento oscilante y esto no debe considerarse un problema o defecto.10.

GARANTÍA LIMITADA DE POR VIDA

Se extiende al comprador original de un ventilador Fanimation

Instrucciones de seguridad importantes

ADVERTENCIA: Siga estas instrucciones para prevenir incendios, descargas eléctricas y lesiones personales graves.

Lea el manual del propietario y la información de seguridad antes de instalar su nuevo ventilador. Observe los diagramas de 1.

ensamblaje adjuntos.

Antes de llevar a cabo el mantenimiento o la limpieza de la unidad, desconecte la electricidad en el panel de servicio y bloquee los 2.

medios de desconexión del mismo para evitar que se active accidentalmente. Si no se pueden bloquear los medios de desconexión

del servicio, coloque un dispositivo de advertencia, como una etiqueta, en el panel de servicio.

Tenga cuidado con la estructura y las aspas del ventilador cuando limpie, pinte o trabaje cerca del mismo. Desconecte siempre la 3.

electricidad del ventilador de techo antes de llevar a cabo el mantenimiento.

No coloque nada en las aspas del ventilador cuando éste se encuentra en funcionamiento.4.

No accione el conmutador inversor hasta que las aspas del ventilador se hayan detenido por completo.5.

Instrucciones de seguridad adicionales

Para evitar posibles descargas eléctricas, asegúrese de que la electricidad esté desconectada en la caja de fusibles antes de realizar1.

la instalación eléctrica, y no haga funcionar el ventilador sin las aspas.

Todos los procedimientos de conexión eléctrica e instalación deben cumplir con los Códigos eléctricos nacionales (ANSI/NFPA 2.

70) y Códigos locales. El ventilador de techo debe estar conectado a tierra a fin de prevenir posibles descargas eléctricas. La

instalación eléctrica debe ser llevada a cabo o aprobada por un electricista autorizado.

Se debe fijar bien la base del ventilador; ésta debe ser capaz de soportar sin problemas al menos 15,9 kg (35 lb). Consulte la página3.

24 del manual del propietario para ver los requisitos de soporte. Si tiene dudas, consulte a un electricista calificado.

Las aspas del ventilador deben instalarse por lo menos a 2 m (7 pies) del suelo, a fin de evitar un contacto accidental con las mismas.4.

Siga las recomendaciones sobre el método correcto de instalación eléctrica de su ventilador de techo. Si no posee la experiencia o 5.

los conocimientos eléctricos adecuados, contrate a un electricista autorizado para instalar el ventilador.

Utilícelo solo con los kits de iluminación adecuados para ubicaciones seco.6.

ADVERTENCIA: Este producto está diseñado para ser usado sólo con las piezas suministradas o los accesorios indicados

específicamente para el mismo. Si utiliza piezas o accesorios que no están indicados para su uso con este producto, podría

sufrir lesiones personales o dañar el ventilador.

ADVERTENCIA: Para reducir el riesgo de lesiones personales, no doble los soportes de las aspas (borde o soporte de aspas) al instalar

los soportes, balancear las aspas o limpiar el ventilador. No coloque objetos extraños entre las aspas del ventilador en funcionamiento.

ADVERTENCIA: Para reducir el riesgo de incendios o descargas eléctricas. No use este ventilador con un dispositivo de control de la

velocidad de estado sólido.

ADVERTENCIA: Para reducir el riesgo de descarga eléctrica. Desconecte el circuito de la fuente de alimentación al ventilador antes de

instalar el kit de iluminación.

AVERTISSEMENT: Ce produit est conçu pour utiliser uniquement les pièces l'accompagnant et/ou les accessoires spécifiquement

conçus pour ce produit. L'utilisation de pièces et/ou d'accessoires qui ne sont pas conçus pour être utilisés avec ce produit peut

provoquer des blessures ou des dommages matériels.

AVERTISSEMENT: Afin de réduire le risque de blessure, ne pliez pas le support de pale (bride ou porte-pale) lors de l'installation des

supports, de l'équilibrage des pales ou du nettoyage du ventilateur. N'insérez pas de corps étrangers entre les pales du ventilateur en

rotation.

AVERTISSEMENT: Pour réduire le risque d’incendie ou d’électrocution. N’utilisez pas ce ventilateur avec un dispositif de contrôle de la

vitesse à semi-conducteur.

AVERTISSEMENT: Pour réduire le risque d’électrocution. Débranchez le circuit d’alimentation électrique du ventilateur avant d’installer le kit

d’éclairage.

La page charge ...

Fanimation FP8533 Doren Le manuel du propriétaire

Marque: Fanimation

Modèle: FP8533 Doren

Catégorie: Ventilateurs ménagers

Taper: Le manuel du propriétaire

Télécharger le PDF

rapport

dans d''autres langues

English: Fanimation FP8533 Doren Owner's manual
español: Fanimation FP8533 Doren El manual del propietario

Fanimation FP8533 Doren Le manuel du propriétaire

Fanimation FP8533 Doren Le manuel du propriétaire

dans d''autres langues

Documents connexes

Autres documents