Oracle SGSAS6-EM-Z Guide d'installation

Taper
Guide d'installation

Ce manuel convient également à

Part No: E22492-07
December 2014
Sun Storage 6 Gb SAS ExpressModule
HBA
Installation Guide For HBA Models SGX-SAS6-EM-Z and SG-
SAS6-EM-Z
Copyright © 2010, 2011, 2012, 2013, 2014 , Oracle and/or its affiliates. All rights reserved.
This software and related documentation are provided under a license agreement containing restrictions on use and disclosure and are protected by intellectual property laws. Except
as expressly permitted in your license agreement or allowed by law, you may not use, copy, reproduce, translate, broadcast, modify, license, transmit, distribute, exhibit, perform,
publish, or display any part, in any form, or by any means. Reverse engineering, disassembly, or decompilation of this software, unless required by law for interoperability, is
prohibited.
The information contained herein is subject to change without notice and is not warranted to be error-free. If you find any errors, please report them to us in writing.
If this is software or related documentation that is delivered to the U.S. Government or anyone licensing it on behalf of the U.S. Government, the following notice is applicable:
U.S. GOVERNMENT END USERS. Oracle programs, including any operating system, integrated software, any programs installed on the hardware, and/or documentation, delivered
to U.S. Government end users are "commercial computer software" pursuant to the applicable Federal Acquisition Regulation and agency-specific supplemental regulations. As
such, use, duplication, disclosure, modification, and adaptation of the programs, including any operating system, integrated software, any programs installed on the hardware, and/or
documentation, shall be subject to license terms and license restrictions applicable to the programs. No other rights are granted to the U.S. Government.
This software or hardware is developed for general use in a variety of information management applications. It is not developed or intended for use in any inherently dangerous
applications, including applications that may create a risk of personal injury. If you use this software or hardware in dangerous applications, then you shall be responsible to take all
appropriate fail-safe, backup, redundancy, and other measures to ensure its safe use. Oracle Corporation and its affiliates disclaim any liability for any damages caused by use of this
software or hardware in dangerous applications.
Oracle and Java are registered trademarks of Oracle and/or its affiliates. Other names may be trademarks of their respective owners.
Intel and Intel Xeon are trademarks or registered trademarks of Intel Corporation. All SPARC trademarks are used under license and are trademarks or registered trademarks of
SPARC International, Inc. AMD, Opteron, the AMD logo, and the AMD Opteron logo are trademarks or registered trademarks of Advanced Micro Devices. UNIX is a registered
trademark of The Open Group.
This software or hardware and documentation may provide access to or information on content, products, and services from third parties. Oracle Corporation and its affiliates are
not responsible for and expressly disclaim all warranties of any kind with respect to third-party content, products, and services. Oracle Corporation and its affiliates will not be
responsible for any loss, costs, or damages incurred due to your access to or use of third-party content, products, or services.
Copyright © 2010, 2011, 2012, 2013, 2014 , Oracle et/ou ses affiliés. Tous droits réservés.
Ce logiciel et la documentation qui l’accompagne sont protégés par les lois sur la propriété intellectuelle. Ils sont concédés sous licence et soumis à des restrictions d’utilisation et
de divulgation. Sauf disposition de votre contrat de licence ou de la loi, vous ne pouvez pas copier, reproduire, traduire, diffuser, modifier, breveter, transmettre, distribuer, exposer,
exécuter, publier ou afficher le logiciel, même partiellement, sous quelque forme et par quelque procédé que ce soit. Par ailleurs, il est interdit de procéder à toute ingénierie inverse
du logiciel, de le désassembler ou de le décompiler, excepté à des fins d’interopérabilité avec des logiciels tiers ou tel que prescrit par la loi.
Les informations fournies dans ce document sont susceptibles de modification sans préavis. Par ailleurs, Oracle Corporation ne garantit pas qu’elles soient exemptes d’erreurs et vous
invite, le cas échéant, à lui en faire part par écrit.
Si ce logiciel, ou la documentation qui l’accompagne, est concédé sous licence au Gouvernement des Etats-Unis, ou à toute entité qui délivre la licence de ce logiciel ou l’utilise pour
le compte du Gouvernement des Etats-Unis, la notice suivante s’applique:
U.S. GOVERNMENT END USERS. Oracle programs, including any operating system, integrated software, any programs installed on the hardware, and/or documentation, delivered
to U.S. Government end users are "commercial computer software" pursuant to the applicable Federal Acquisition Regulation and agency-specific supplemental regulations. As
such, use, duplication, disclosure, modification, and adaptation of the programs, including any operating system, integrated software, any programs installed on the hardware, and/or
documentation, shall be subject to license terms and license restrictions applicable to the programs. No other rights are granted to the U.S. Government.
Ce logiciel ou matériel a été développé pour un usage général dans le cadre d’applications de gestion des informations. Ce logiciel ou matériel n’est pas conçu ni n’est destiné
à être utilisé dans des applications à risque, notamment dans des applications pouvant causer des dommages corporels. Si vous utilisez ce logiciel ou matériel dans le cadre
d’applications dangereuses, il est de votre responsabilité de prendre toutes les mesures de secours, de sauvegarde, de redondance et autres mesures nécessaires à son utilisation dans
des conditions optimales de sécurité. Oracle Corporation et ses affiliés déclinent toute responsabilité quant aux dommages causés par l’utilisation de ce logiciel ou matériel pour ce
type d’applications.
Oracle et Java sont des marques déposées d’Oracle Corporation et/ou de ses affiliés. Tout autre nom mentionné peut correspondre à des marques appartenant à d’autres propriétaires
qu’Oracle.
Intel et Intel Xeon sont des marques ou des marques déposées d’Intel Corporation. Toutes les marques SPARC sont utilisées sous licence et sont des marques ou des marques
déposées de SPARC International, Inc. AMD, Opteron, le logo AMD et le logo AMD Opteron sont des marques ou des marques déposées d’Advanced Micro Devices. UNIX est une
marque déposée d’The Open Group.
Ce logiciel ou matériel et la documentation qui l’accompagne peuvent fournir des informations ou des liens donnant accès à des contenus, des produits et des services émanant
de tiers. Oracle Corporation et ses affiliés déclinent toute responsabilité ou garantie expresse quant aux contenus, produits ou services émanant de tiers. En aucun cas, Oracle
Corporation et ses affiliés ne sauraient être tenus pour responsables des pertes subies, des coûts occasionnés ou des dommages causés par l’accès à des contenus, produits ou services
tiers, ou à leur utilisation.
3
Contents
Using This Documentation .................................................................................. 7
1 HBA Overview ................................................................................................. 9
Kit Contents ................................................................................................... 9
HBA Features ................................................................................................. 9
Valid Drive Mix Configurations With HDDs and SSDs ......................................... 11
Operating System and Technology Requirements ................................................. 12
System Interoperability ................................................................................... 12
Host Platform Support ............................................................................ 13
Storage System Support .......................................................................... 13
Software Support ................................................................................... 14
Boot Support ................................................................................................. 14
2 Hardware Installation and Removal ............................................................... 15
Observing ESD and Handling Precautions .......................................................... 15
Installing the HBA ......................................................................................... 16
To Prepare for Hardware Installation .................................................... 16
To Install the HBA ........................................................................... 16
HBA LEDs ................................................................................................... 19
Port to Phys Mapping ..................................................................................... 21
To Complete the Installation ............................................................... 21
Next Steps .................................................................................................... 22
Removing the HBA ........................................................................................ 22
To Remove the HBA ......................................................................... 23
3 Creating a Bootable Drive in a Preboot Environment .................................... 25
Overview of Creating a Bootable Drive in a Preboot Environment .......................... 25
Creating a Bootable Drive (SPARC) .................................................................. 26
To Create a Bootable Drive (SPARC) ................................................... 26
Using the OBP Environment to Set Up a Bootable Drive (SPARC) .................. 26
Contents
4 Sun Storage 6 Gb SAS ExpressModule HBA • December 2014
Creating an Alias for a Bootable Drive (SPARC) ......................................... 27
Creating a Bootable Drive (x86) ....................................................................... 28
To Create a Bootable Drive (x86) ........................................................ 28
Using the BIOS Configuration Utility to Set Up a Bootable Drive (x86) ........... 29
Selecting a Bootable Drive (x86) .............................................................. 32
Validating the Oracle Solaris Labels of the HBA Drives ........................................ 33
▼ To Verify That the Oracle Solaris Label of a Drive is Valid ....................... 33
Next Steps ............................................................................................ 35
Installing the Oracle Solaris OS ........................................................................ 35
To Prepare to Install the Oracle Solaris OS ............................................ 36
To Install the Oracle Solaris OS .......................................................... 36
4 HBA Software Installation .............................................................................. 37
Installing the Oracle Solaris Driver and Firmware ................................................ 37
Firmware Updates .................................................................................. 37
Installing the Linux Driver and Firmware ........................................................... 38
To Install the Linux Driver ................................................................. 38
Firmware Updates .......................................................................................... 38
Installing the Windows Server Driver and Firmware ............................................. 38
To Install the Windows Driver ............................................................ 39
Firmware Updates .......................................................................................... 39
Installing the VMware Driver and Firmware ....................................................... 39
5 Known Issues ................................................................................................ 41
MegaRAID Storage Manager GUI-Related Issues ................................................ 41
Cannot Hotplug the HBA Card Through the MSM GUI ................................ 41
Cannot Assign a Global Hot Spare Through the MSM GUI ........................... 42
Cannot Upgrade Firmware on the HBA Through the MSM GUI ..................... 42
Cannot Reboot After Upgrading Firmware on the HBA ................................ 42
Storage-Related Issues .................................................................................... 43
Only 24 Devices Are Displayed In The System BIOS Boot List ...................... 43
Kernel Panic During Oracle Solaris Operating System Installation ................... 43
The Oracle Solaris OS Installation Hangs ................................................... 44
The System Hangs After Deleting a RAID Volume ...................................... 44
A HBA Specifications ....................................................................................... 45
Physical Characteristics ................................................................................... 45
PCI Performance ............................................................................................ 45
SAS Port Bandwidths ..................................................................................... 46
Contents
5
Environmental Requirements ............................................................................ 46
HBA Connectors ............................................................................................ 47
Glossary ............................................................................................................. 49
6 Sun Storage 6 Gb SAS ExpressModule HBA • December 2014
Using This Documentation 7
Using This Documentation
This installation guide describes how to install and remove Oracle's PCIe, eight-channel Sun
Storage 6 Gigabit (Gb) per second Serial Attached SCSI (SAS) ExpressModule host bus
adapter (HBA). It also explains how to install any software required by the HBA and provides
known issues about the product.
The document is written for technicians, system administrators, application service providers
(ASPs), and users who have advanced experience troubleshooting and replacing hardware.
This preface contains the following topics:
“Related Oracle Documentation” on page 7
“Related Third Party Documentation” on page 7
“Documentation Feedback” on page 8
“Support and Accessibility” on page 8
Related Oracle Documentation
To view, print, or purchase a broad selection of Oracle documentation, including localized
versions, go to: http://www.oracle.com/documentation
To access HBA and Converged Network Adapter documentation, go to: http://
www.oracle.com/technetwork/documentation/oracle-storage-networking-190061.html
Related Third Party Documentation
The documents listed as located online are available at:
http://www.lsi.com/sep/Pages/oracle/index.aspx
Application/Hardware Title Format Location
SAS2 Upgrade Utility
SAS2 Flash Utility Quick Reference Guide
PDF Online
Documentation Feedback
8 Sun Storage 6 Gb SAS ExpressModule HBA • December 2014
Documentation Feedback
Provide feedback on this documentation at:
http://www.oracle.com/goto/docfeedback
Support and Accessibility
Description Links
Access electronic support through My
Oracle Support.
http://support.oracle.com
For hearing impaired:
http://www.oracle.com/accessibility/support.html
Learn about Oracle's commitment to
accessibility.
http://www.oracle.com/us/corporate/accessibility/index.html
Chapter1 • HBA Overview 9
1
♦♦♦C H A P T E R  1
HBA Overview
This chapter provides a basic overview of Oracle's Sun Storage 6 Gigabit per second (Gb)
Serial Attached SCSI (SAS) ExpressModule host bus adapter (HBA), which uses LSI
technology. The chapter also describes the various operating systems, host platforms, storage,
and infrastructure configurations that support the HBA.
This chapter contains the following topics:
“Kit Contents” on page 9
“HBA Features” on page 9
“Operating System and Technology Requirements” on page 12
“Valid Drive Mix Configurations With HDDs and SSDs” on page 11
“System Interoperability” on page 12
“Boot Support” on page 14
Kit Contents
Sun Storage 6 Gb SAS ExpressModule HBA
Accessing Documentation document
Note - The Accessing Documentation document in the HBA ship kit provides instructions
on how to access Oracle HBA installation documentation. For information about
accessing non-Oracle documents that are related to this HBA, see “Related Third Party
Documentation” on page 7.
HBA Features
The Sun Storage 6 Gb SAS ExpressModule HBA (SGX-SAS6-EM-Z, SG-SAS6-EM-Z)
provides eight serial Phys for connection to SAS and/or Serial ATA (SATA) devices. Each Phy
HBA Features
10 Sun Storage 6 Gb SAS ExpressModule HBA • December 2014
is capable of 1.5 Gb, 3 Gb, or 6 Gb SAS and SATA link rates. The PCI-Express interface is
capable of 5 GT/s per lane in each direction. With eight fully duplexed links, the total becomes
80 GT/s. Note that actual transfer rates are a function of the host system environment. The
card is packaged in a single-wide PCIe Module that conforms to the PCIe ExpressModule
Electromechanical Specification, Rev. 1.0.
The HBA contains on-board Flash ROM for storing the firmware. The board also includes
Hot Plug architecture which allows insertion and removal of the module when the system has
been alerted via the Attention Switch. The light-emitting diodes (LEDs) on the HBA report a
heartbeat, activity, and fault conditions when detected by the firmware. Fusion-MPT firmware
operates the HBA.
The functionality of the HBA comes from the LSISAS2008 controller ASIC. The HBA
connects up to eight direct connected SAS/SATA devices to a computer system through the
PCIe ExpressModule interface. The HBA controller uses eight PCIe Phys.
The HBA supports the following features:
Serial SCSI protocol (SSP), serial ATA tunneling protocol (STP), and serial management
protocol (SMP), as defined in the Serial Attached SCSI (SAS) Specification, version 2.0
Simplified cabling with a point-to-point, serial architecture
Smaller and thinner cables that promote unrestricted airflow
A serial, point-to-point, enterprise-level storage interface
Data transfers using SCSI information units
Compatibility with SATA target devices
Narrow and wide ports (See Table 1-1)
TABLE 1-1
6 Gb SAS Bandwidths
Half Duplex Full Duplex
Narrow Port (1 Lane), 600 MB/s Narrow Port (1 Lane), 1200 MB/s
Wide Port (2 Lanes), 1200 MB/s Wide Port (2 Lanes), 2400 MB/s
Wide Port (4 Lanes), 2400 MB/s Wide Port (4 Lanes), 4800 MB/s
Hot-plug insertion in ExpressModule enclosures, as defined in the PCIe ExpressModule
Electromechanical Specification, version 1.0
Several LEDs routed through the front of the enclosure: an Activity LED and Fault LED
for each mini-SAS connector, and a Power LED and Attention LED for the HBA
Figure 1-1 depicts the physical features of the HBA.
Valid Drive Mix Configurations With HDDs and SSDs
Chapter1 • HBA Overview 11
FIGURE  1-1
Oracle's Sun Storage 6 Gb SAS ExpressModule HBA
Valid Drive Mix Configurations With HDDs and SSDs
The HBA supports connectivity using SATA II drives, SAS drives, or both. Within an enclosure
(SAS expander), you can mix any drive types, subject to any restrictions imposed by the
enclosure.
Operating System and Technology Requirements
12 Sun Storage 6 Gb SAS ExpressModule HBA • December 2014
Operating System and Technology Requirements
The HBA requires the operating system (OS) and technology levels listed in Table 1-2, at
minimum.
TABLE 1-2
Supported Operating System/Technology Versions 
Operating System/Technology Recommended Versions (minimum)
Oracle Solaris OS for the x86 (32-
bit and 64-bit) platform
Oracle Solaris 11.1 with SRU7
Oracle Solaris 10 01/13 with patches 149176-02 and 145649-04, at
minimum
To obtain the latest patches and SRUs, go to http://support.oracle.com
Oracle Solaris OS for the SPARC
(32-bit and 64-bit) platform
Oracle Solaris 11.1 with SRU7
Oracle Solaris 10 01/13 with patches 149175-02 and 145648-04, at
minimum
To obtain the latest patches and SRUs, go to http://support.oracle.com
Linux OS (64-bit) Red Hat Enterprise Linux (RHEL) 5.9 and 6.4
SUSE Linux Enterprise Server (SLES) 11SP2
Oracle Enterprise Linux 5.9 and 6.4 (Red Hat Compatible Kernel
(RHCK) and Unbreakable Enterprise Kernel (UEK) 2, at minimum)
Virtual Machine OS Oracle VM 3.2.1
Microsoft Windows OS (64-bit) Window Server 2008 R2 including SP1 (64-bit)
Windows Server 2012
VMware Technology VMware ESX/ESXi 5.0
VMware ESX/ESXi 5.1
Oracle supports the Oracle Solaris 10 10/09 OS with patches 142676-02 (x86) and 143523-02 (SPARC) as the minimum Oracle Solaris OS
level. However, if issues occur with the HBA, Oracle Support requires that you update to the recommended OS levels listed in Table 1-2.
System Interoperability
This section provides host platform, storage, and software support information. This section
contains the following topics:
“Host Platform Support” on page 13
“Storage System Support” on page 13
“Software Support” on page 14
System Interoperability
Chapter1 • HBA Overview 13
Host Platform Support
The HBA is supported by the platforms listed in Table 1-3. For up-to-date information, see your
Oracle system product notes and web pages.
For supported operating system and technology versions, see Table 1-2.
TABLE 1-3
Host Platform Support
Platform Supported OS/Technology
Oracle SPARC Servers
Sun Blade T6320 Oracle Solaris
Sun Blade T6340 Oracle Solaris
SPARC T3-1B Oracle Solaris
SPARC T3-4 Oracle Solaris
SPARC T4-4 Oracle Solaris
SPARC T5-1B Server Module Oracle Solaris
Oracle x86 Servers
Netra 6000 Oracle Solaris, Linux, Virtual Machine, VMware, and Windows
Sun Fire X4800 Oracle Solaris, Linux, Virtual Machine, VMware, and Windows
Sun Blade X3-2B Oracle Solaris, Linux, Virtual Machine, VMware, and Windows
Sun Blade X4-2B Oracle Solaris, Linux, Virtual Machine, VMware, and Windows
Sun Blade X6270 M2 Oracle Solaris, Linux, Virtual Machine, VMware, and Windows
Sun Server X2-8 Oracle Solaris, Linux, Virtual Machine, VMware, and Windows
Storage System Support
The HBA supports the following storage:
Sun Storage F5100 Flash Array, 1.0, running version 5.4.5 Expander Firmware, at
minimum
LT04HH SAS 1U Rackmount
LTO-3 HH 1U Rackmount Media Tray
LTO-4HH Desktop
LTO-4 HH 1U Rackmount Media Tray
LTO-5HH Desktop
Boot Support
14 Sun Storage 6 Gb SAS ExpressModule HBA • December 2014
LTO-5 HH 1U Rackmount Media Tray
Software Support
Install, Flash, and BIOS configuration utilities are provided. The HBA uses the Fusion-
MPT architecture for all major operating systems, which allows for thinner drivers for better
performance. To obtain the most up-to-date device drivers, firmware, and boot code that support
your operating system, go to: http://www.lsi.com/sep/Pages/oracle/index.aspx
Boot Support
Booting through the HBA is supported in the following operating system and technology
environments:
Oracle Solaris 10 01/13 OS for the SPARC and x86 platforms
Oracle Solaris 10 11.1 OS for the SPARC and x86 platforms
RHEL 5.9 and 6.4 OSes
SLES 11 SP2 OS
Oracle Linux 5.9 and 6.4 OSes
Oracle VM 3.2.1 OS
Windows Server 2008 R2 including SP1 OS
Windows Server 2012 OS
ESX and ESXi Server, version 5.0 and 5.1 technology
Chapter2 • Hardware Installation and Removal 15
2
♦♦♦C H A P T E R  2
Hardware Installation and Removal
This chapter explains how to install and remove the HBA. You do not need to turn off system
power or disconnect power cords during the installation, since the enclosures fully support hot-
plugging.
This chapter contains the following topics:
“Observing ESD and Handling Precautions” on page 15
“Installing the HBA” on page 16
“HBA LEDs” on page 19
“Port to Phys Mapping” on page 21
“Next Steps” on page 22
“Removing the HBA” on page 22
Observing ESD and Handling Precautions
Caution - Damage to the HBA can occur as the result of careless handling or electrostatic
discharge (ESD). Always handle the HBA with care to avoid damage to electrostatic-sensitive
components.
To minimize the possibility of ESD-related damage, use both a workstation antistatic mat and
an ESD wrist strap. You can get an ESD wrist strap from any reputable electronics store or from
Oracle as part number #250-1007.
Observe the following precautions to avoid ESD-related problems:
Leave the HBA in its antistatic bag until you are ready to install it in the system.
Always use a properly fitted and grounded wrist strap or other suitable ES protection when
handling the HBA and observe proper ESD grounding techniques.
Always hold the HBA by the metal enclosure.
Place the HBA on a properly grounded antistatic work surface pad when it is out of its
protective antistatic bag.
Installing the HBA
16 Sun Storage 6 Gb SAS ExpressModule HBA • December 2014
Installing the HBA
Before you start, read the instructions in this section as well as the installation instructions for
the storage devices to be connected to the HBA. This section contains the following topics:
“To Prepare for Hardware Installation” on page 16
“To Install the HBA” on page 16
To Prepare for Hardware Installation
1.
Read and observe the safety information for this product.
See the Safety and Compliance documentation for this HBA.
2.
Make a backup of your data.
3.
Familiarize yourself with the physical features of the HBA.
See “HBA Features” on page 9.
4.
Ensure you have the proper cables for the HBA.
The HBA has two external x4 mini-SAS connectors, each connecting to four 6Gb SAS ports.
You will need to use the appropriate cable to connect the HBA to SAS versus SATA storage
devices.
For connection to external drives or backplanes, you must use an external cable with a standard
mini-SAS connector (SFF-8088) on the controller side of the cable.
Use only Oracle-provided SAS cables. For more information or to purchase cables for your
Oracle system, go to http://www.oracle.com. Cable connectors are keyed so that you cannot
insert them incorrectly.
5.
Unpack the box containing the HBA in a static-free environment and inspect it
for damage.
Note - Leave the HBA in its protective bag until you are ready to install it. If there is damage,
contact Oracle customer support.
To Install the HBA
1.
Attach an ESD wrist strap and remove the HBA from its protective bag.
To Install the HBA
Chapter2 • Hardware Installation and Removal 17
See “Observing ESD and Handling Precautions” on page 15.
2.
Refer to your system installation or service manual to determine how to locate
an empty PCIe ExpressModule slot in which you can insert the HBA.
3.
Grasp the button (the latching mechanism at the end of the ejection lever) on the
front of the HBA and pivot the lever downward.
4.
Insert the HBA into an available PCIe ExpressModule slot in the chassis, as
shown in Figure 2-1.
To Install the HBA
18 Sun Storage 6 Gb SAS ExpressModule HBA • December 2014
FIGURE  2-1
Installing the HBA into a PCIe Slot
Figure Legend
1
Chassis
2
Ejection Lever (Open)
Note - The configuration of the enclosure in your system might not be the same as shown in this
illustration.
5.
When the HBA is fully inserted in the slot, pivot the ejection lever up to the
locked position.
HBA LEDs
Chapter2 • Hardware Installation and Removal 19
6.
Connect SAS cables to the two external x4 mini-SAS connectors and attach the
other end of the cables to the disk drives or other SAS/SATA devices, per your
requirements.
Use only Oracle-provided SAS cables (530-3887-01), available for purchase at: http://
www.oracle.com
7.
Observe the LEDs to ensure normal operation of the HBA.
For more information about the LEDs, see “HBA LEDs” on page 19.
HBA LEDs
There are six LEDs on the front of the enclosure. For each port, there is one green Activity LED
and one yellow Fault LED that indicate any activity or fault of a Phy in that port. There is also
one green Power LED and one yellow Attention LED on the HBA. The Power and Attention
LEDs are both controlled by the host system and show through the PCIe ExpressModule
enclosure and functionality (see Table 2-1).
HBA LEDs
20 Sun Storage 6 Gb SAS ExpressModule HBA • December 2014
FIGURE  2-2
External Connectors and LEDs.
Figure Legend
1
Port 1 Activity Green LED
2
Port 1 Fault Yellow LED
3
Port 2 Activity Green LED
4
Port 2 Fault Yellow LED
5
Green Power LED
6
Yellow Attention LED
7
Mini SAS Connectors, or Ports (Port 1 on top and Port 2 below)
8
Attention Button
The different states of the Attention and Power LEDs are listed in Table 2-1
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52

Oracle SGSAS6-EM-Z Guide d'installation

Taper
Guide d'installation
Ce manuel convient également à

dans d''autres langues