brondell PURESPA Le manuel du propriétaire

OWNER MANUAL

PS-65 Bidet Attachment

Product Features ....................Page 2

Parts List. . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 3

Product Specs .......................Page 4

Installation ..........................Page 4

Operation ...........................Page 9

Maintenance ........................Page 10

Warranty ............................Page 11

Contact .............................Page 12

Spanish Version .....................Page 13

French Version ......................Page 26

CONTENTS

PRODUCT FEATURES

• High-quality ABS material with full body panel

• Hygienic retractable nozzle

• Self-cleaning nozzle feature

• Ambient temperature bidet wash

• Positionable nozzle

• Adjustable water pressure

• Ceramic core internal valve with patented uni-body

construction for safety

• High-quality metal 7/8” T-valve

• Durable braided metal cold water hose

• No electricity or batteries required

• Easy installation and adjustable toilet ﬁt

• All accessories included for standard installation

• One-year warranty

2

Bidet attachment with turn-dial control and adjustable brackets

T-Valve connector

⁄" x ⁄" x ⁄"

Owner manual

Large rubber washer (2)

PARTS LIST

3

WHAT'S IN THE BOX?

25” braided metal

bidet hose

4

PRODUCT SPECS

INSTALLATION

IMPORTANT

Please be advised that the provided

T-Valve should be installed at the Fill

Valve under the toilet tank, and NOT

at the cold water supply coming from

the wall.

If you do not have access to the Fill

Valve under the toilet tank, contact

Brondell Customer Service at

888.542.3355. We may be able to

guide you through the process.

4.1"–7.9"

3.14"

1.3" at deepest point

on control panel

0.4" deep

13.4"

6.3"

5.5"

1. Remove existing toilet seat

a. Lift hinge covers and use ﬂathead or Phillips

head screwdriver to remove the mounting

bolts. Alternatively, you may need to loosen

mounting bolts underneath the seat.

b. Remove the toilet seat and set the seat,

mounting bolts and hardware aside.

INSTALLATION cont.

Check Water Supply Line

Check the water supply line that connects the toilet tank ﬁll valve to the water

shuto valve at the wall. If it is a rigid pipe, you will need to purchase a ﬂexible

water supply hose to replace it before installing the PureSpa. The length of the

hose may vary, and the top connection size should be 7/8” Ballcock to connect to

the T-valve that you will install under the toilet tank, and the bottom connection will

vary (most common are 3/8” and 1/2” female compression).

BEFORE INSTALLATION

INSTALLING THE BIDET ATTACHMENT

Step 1b

5

Step 2c

2. Turn o water supply valve and ﬂush toilet

a. Turn o water supply at the wall to stop ﬂow

of water.

b. Flush toilet and hold down handle to

completely empty toilet tank.

c. Disconnect water supply hose from the ﬁll

valve under the toilet tank.

6

3. Connect 7/8” T-Valve to Water Supply Line and

Fill Valve Under Toilet Tank.

a. Install the 7/8” T-valve with one or both of

the rubber washers to the incoming water

connection on the bottom of your toilet tank.

b. Connect the cold water supply line coming

from the wall to the bottom of the T-valve.

4. Connect Bidet Hose to T-Valve

a. Connect one end of the braided metal bidet

hose to the remaining open side of the

installed T-valve.

Step 3a

Step 3b

Step 4a

b. Make sure the adjustable brackets line

up with the holes in the toilet ﬁxture. You

may need to move the adjustable brackets

accordingly to line up properly.

c. Replace the toilet seat on top of bidet

attachment and secure using original toilet

seat hardware. Make sure to tighten so that

the bidet attachment and seat do not move.

5. Install Bidet Attachment on Toilet

a. Place bidet attachment on the toilet so the

nozzle is as close to the back of the toilet

bowl as it will go. This will vary by toilet.

INSTALLATION cont.)

Step 5a

Step 5b

Step 5c

7

8

7. Turn on Water Supply and check for leaks

a. Open the main water supply valve slowly and check for leaks.

b. Wait 5-10 minutes, check again and if there are no leaks continue.

Note: if there is any leaking, check all rubber washers and make sure all water

connections are tight and secure. If necessary, you can use plumbers tape for

any leaking connections.

6. Connect Bidet Hose to Bidet Attachment

a. Connect open end of bidet hose to the

connection on the back side of the bidet

attachment.

Step 6a

To clean the bidet nozzle, turn the control dial towards the “Nozzle Cleaning”

position and water should wash over the nozzle.

For the general bidet wash function, turn the dial towards the “Wash” position.

• The further the dial is turned, the higher the water pressure will be.

• To lower the water pressure, turn the nozzle back towards the center.

The nozzle can be easily adjusted by gently

pulling the end of the nozzle forward or

backwards. Once desired position is set, the

nozzle will remain in that position until manually

moved.

OPERATION

USING THE PURESPA

NOZZLE POSITIONING

9

10

To clean the nozzle, gently pull down on the head of the nozzle, and use a

toothbrush or soft cloth and mild detergent (such as dish soap). You may also

unscrew the nozzle tip cap for a more thorough cleaning or use a toothpick if any

nozzle holes are plugged with hard water buildup. When cleaning, be careful not

to drop or ﬂush the nozzle cap.

To clean the bidet, use a mild cleaner such as Simple Green or Windex spray to

clean the PureSpa. Do not scrub or use harsh, abrasive products to clean the

PureSpa, which may scratch the product.

MAINTENANCE

SHORT TERM NON-USE

If the product will not be used for more than a few weeks, you may consider

shutting the water supply o at the wall for extra precaution.

11

WARRANTY

Brondell products are backed by some of the most comprehensive warranties in the industry. Brondell

warrants that all products (excluding consumable items) shall be free from defects in material and

workmanship under normal use and service.

PureSpa PS-65 Residential One-Year Limited Warranty

100% Coverage of all parts and labor for the entire product for the ﬁrst year from original date of purchase.

PureSpa PS-65 Commercial Warranty

Warranty period 1 year from original purchase date for all Brondell products. Warranties may not apply to

products that are used for heavy commercial, hospital, or other high use non-residential applications.

Exclusions and Limitations

1. BRONDELL warrants its products to be free from manufacturing defects under normal use and service.

This warranty is extended only to the ORIGINAL PURCHASER.

2. BRONDELL’s obligations under this warranty are limited to repairs or replacement, at BRONDELL’s

option, of products or parts found to be defective, provided that such products were properly installed

and used in accordance with instructions. BRONDELL reserves the right to make such inspections as may

be necessary in order to determine the cause of the defect. BRONDELL will not charge for labor or parts

in connection with warranty repairs for the ﬁrst three years from date of purchase on all products except

those that may be subject to commercial use limitations.

3. BRONDELL is not responsible for the cost of removal, return (shipping) and/or re-installation of products.

This warranty does NOT apply to:

• Damage or loss which occurs during shipment.

• Damage or loss sustained through any natural or man-made causes beyond the control of

BRONDELL, including but not limited to ﬁre, earthquake, ﬂoods, etc.

• Damage or loss resulting from sediments or foreign matter contained in a water system.

• Damage or loss resulting from negligent or improper installation including installation of a unit in a

harsh or hazardous environment.

• Damage or loss resulting from removal, improper repair, modiﬁcation of the product, or improper

maintenance including damage caused by chlorine or chlorine related products

• Damage or loss resulting from electrical surges, electrical outages, lightning strikes, or other acts

which are not the fault of Brondell or which the Product is not speciﬁed to tolerate.

4. This warranty gives you speciﬁc legal rights. You may have other rights which vary from state to state.

THIS WRITTEN WARRANTY IS THE ONLY WARRANTY MADE BY BRONDELL. REPAIR OR REPLACEMENT

AS PROVIDED UNDER THIS WARRANTY SHALL BE THE EXCLUSIVE REMEDY AVAILABLE TO THE

PURCHASER. BRONDELL SHALL NOT BE RESPONSIBLE FOR LOSS OF USE OF THE PRODUCT OR FOR

OTHER INCIDENTAL, SPECIAL, FOR CONSEQUENTIAL DAMAGES OR EXPENSES INCURRED BY THE

PURCHASER OR FOR LABOR OR OTHER COSTS DUE TO INSTALLATION OR REMOVAL OR COSTS OF

REPAIRS BY OTHERS, OR FOR ANY OTHER EXPENSE NOT SPECIFICALLY STATED ABOVE. EXCEPT

TO THE EXTENT PROHIBITED BY APPLICABLE LAW, ANY IMPLIED WARRANTIES, INCLUDING THAT OF

MERCHANTABILITY, ARE EXPRESSLY LIMITED TO THE DURATION OF THIS WARRANTY. SOME STATES

DO NOT ALLOW LIMITATIONS, SO THE ABOVE LIMITATION AND EXCLUSION MAY NOT APPLY TO YOU.

How to Obtain Service

To obtain repair service under this warranty, you must contact an authorized BRONDELL Service Center to

obtain an RMA (Return Merchandise Authorization) number. Proof of purchase in the form of a copy of the

original receipt must accompany the returned unit for the warranty to be valid. Take or ship the unit pre-

paid to the closest Brondell authorized service center along with the RMA number and proof of purchase.

To obtain the RMA number and locate the BRONDELL Service Center location nearest you, please call

1-888-542-3355.

12

CONTACT:

Brondell, Inc.

PO Box 470085

San Francisco, CA 94147-0085

Phone: 1-888-542-3355

Email: [email protected]

Web: www.brondell.com

For questions, contact Brondell Customer Service: 1-888-542-3355

MANUFACTURED BY:

Brondell, Inc.

PO Box 470085

San Francisco, CA 94147-0085

Please retain receipt records for any warranty claims.

MANUAL DEL USUARIO

PS-65 Accesorio para el bidé

Características del producto ..........Página 15

Lista de piezas ......................Página 16

Especiﬁcaciones del producto .........Página 17

Instalación ..........................Página 17

Funcionamiento .....................Página 22

Mantenimiento ......................Página 23

Garantía ............................Página 24

Contactar ...........................Página 25

Versión Inglesa ......................Página 2

Versión Francés .....................Página 26

ÍNDICE

14

CARACTERÍSTICAS DEL PRODUCTO

• Material ABS antibacterial de calidada alta con panel completo

• Boquilla higiénica retráctil

• Función de autolimpieza de la boquilla

• Lavado de bidé a temperatura ambiente

• Posicionamiento de la boquilla

• Presión de agua adaptable

• Válvula interna de núcleo de cerámica con construcción

“Uni-body” patentado por seguridad

• Válvula en T de 7/8 de alta calidad

• Manguera de metal trenzado de bidé para la agua fría

• No requiere energía eléctrica ni baterías

• Fácil instalación y ajustable al inodoro

• Todos los accesorios para una instalación estándar incluidosño

• 1 año de garantía

15

16

Accesorio para el bidé con perilla de control y soportes ajustables

Conector de válvula en T

⁄" x ⁄" x ⁄"

Manual del usuario

Unión de goma grande (2)

LISTA DE PIEZAS

¿QUÉ HAY EN LA CAJA?

Manguera de metal trenzado

de bidé para la agua fría (25")

ESPECIFICACIONES DEL PRODUCTO

INSTALACIÓN

IMPORTANTE

Por favor, tenga en cuenta que la

proporcionada válvula en T debe ser

instalada en la válvula de llenado

bajo el tanque del inodoro, y no en el

suministro de agua fría procedente

de la pared.

Si usted no tiene acceso a la

válvula de llenado bajo el tanque

del inodoro, póngase en contacto

Brondell Servicio al Cliente al

888.542.3355. Podemos ser capaces

de guiarlo a través del proceso.

4.1"–7.9"

3.14"

1.3" en el punto más bajo en el

panel de control

0.4" bajo

13.4"

6.3"

5.5"

17

18

1. Etirar el asiento del inodoro existente

a. Levante las cubiertas de las bisagras y

utilice la cabeza plana de un destornillador

de cabeza Phillips para retirar los pernos

de montaje. Alternativamente, es posible

que deba desajustar los pernos de montaje

debajo del asiento.

b. Retire el asiento del inodoro y coloque el

asiento, montando los pernos y las piezas

originales a un lado.

INSTALACIÓN cont.

Compruebe la Línea de Suministro de Agua

Veriﬁque la línea de suministro de agua que conecta el tanque del inodoro a la

válvula de corte de agua en la pared. Si es una cañería rígida, deberá reemplazarla

por una manguera ﬂexible para suministro de agua antes de instalar el PureSpa.

La extensión de la manguera varía, la conexión superior debe ser un ﬂotador de

7/8" in para conectarse a su válvula de llenado debajo del tanque del inodoro.

ANTES DE INSTALACIÓN

INSTALAR EL ACCESORIO BIDÉ

Etapa 1b

Etapa 2c

2. Cierre de la válvula de corte de suministro de

agua y descargue el inodoro

a. Corte el suministro de agua en la pared para

detener el ﬂujo de agua.

b. Descargue el inodoro y mantenga hacia abajo

la manivela para vaciar el tanque del inodoro

completamente.

c. Desconecte la manguera del suministro

de agua.

3. Conectar el 7/8" válvula en T de la línea del

suministro de agua y válvula de llenado bajo

tanque del inodoro.

a. Instalar el 7/8" válvula en T con uno o los dos

de gomas para la conexión de agua entrante

en la parte inferior de la cisterna del retrete.

b. Conectar la línea de suministro de agua fría

procedente de la pared a la parte inferior de

la válvula en T.

4. Conexión de la manguera del bidé a la válvula

en T

a. Conecte uno de los extremos de la manguera

de metal trenzado de bidé con el extremo

abierto restante de la válvula en T.

Etapa 3a

Etapa 3b

Etapa 4a

19

INSTALACIÓN cont.

La page charge ...

brondell PURESPA Le manuel du propriétaire

brondell PURESPA Le manuel du propriétaire

dans d''autres langues

Documents connexes

Autres documents