Lenco Xemio-760 BT Black Le manuel du propriétaire

Catégorie
Lecteurs MP3 / MP4
Taper
Le manuel du propriétaire

Ce manuel convient également à

USER’S MANUAL
Model: Xemio-760BT
USER MANUAL
Media Player With Bluetooth Audio Transmission
HANDLEIDING
Mediaspeler met Bluetooth audio-overdracht
BENUTZERHANDBUCH
Media-Player mit Bluetooth Audio-Übertragung
MODE D'EMPLOI
Lecteur multimédia avec transmission audio Bluetooth
MANUAL DEL USUARIO
Reproductor multimedia con transmisión de audio por
Bluetooth
2
Index
English ................................................................................................. 3
Nederlands ........................................................................................ 28
Deutsch ............................................................................................. 58
Français ........................................................................................... 89
Español ........................................................................................... 118
3
English
Media Player With Bluetooth Audio Transmission
CAUTION:
Usage of controls or adjustments or performance of procedures other
than those specified herein may result in hazardous radiation exposure.
PRECAUTIONS BEFORE USE
KEEP THESE INSTRUCTIONS IN MIND:
1. Do not cover or block any ventilation openings. When placing the
device on a shelf, leave 5 cm (2”) free space around the whole device.
2. Install in accordance with the supplied user manual.
3. Keep the device away from heat sources such as radiators, heaters,
stoves, candles and other heat-generating products or naked flame.
The apparatus can only be used in moderate climates. Extremely cold
or warm environments should be avoided. Working temperature
between 0° and 35° C.
4. Avoid using the device near strong magnetic fields.
5. Electrostatic discharge can disturb normal usage of this device. If so,
simply reset and restart the device following the instruction manual.
During file transmission, please handle with care and operate in a
static-free environment.
6. Warning! Never insert an object into the product through the vents or
openings. High voltage flows through the product and inserting an
object can cause electric shock and/or short circuit internal parts. For
the same reason, do not spill water or liquid on the product.
7. Do not use in wet or moist areas such as bathrooms, steamy kitchens
or near swimming pools.
8. The apparatus shall not be exposed to dripping or splashing and make
sure that no objects filled with liquids, such as vases, are placed on or
near the apparatus.
9. Do not use this device when condensation may occur. When the unit
is used in a warm wet room with damp, water droplets or
condensation may occur inside the unit and the unit could maybe not
work properly; let the unit stand in power OFF for 1 or 2 hours before
turning on the power: the unit should be dry before getting any
power.
10. Although this device is manufactured with the utmost care and
checked several times before leaving the factory, it is still possible that
problems may occur, as with all electrical appliances. If you notice
smoke, an excessive build-up of heat or any other unexpected
phenomena, you should disconnect the plug from the main power
socket immediately.
4
11. This device must operate on a power source as specified on the
specification label. If you are not sure of the type of power supply
used in your home, consult your dealer or local power company.
12. Keep away from rodents. Rodents enjoy biting on power cords.
13. To clean the device, use a soft dry cloth. Do not use solvents or petrol
based fluids. To remove severe stains, you may use a damp cloth with
dilute detergent.
14. The supplier is not responsible for damage or lost data caused by
malfunction, misuse, modification of the device or battery
replacement.
15. Do not interrupt the connection when the device is formatting or
transferring files. Otherwise, data may be corrupted or lost.
16. If the unit has USB playback function, the usb memory stick should be
plugged into the unit directly. Don’t use an usb extension cable
because it can cause interference resulting in failing of data.
17. The rating label has been marked on the bottom or back panel of the
apparatus.
18. This device is not intended for use by people (including children) with
physical, sensory or mental disabilities, or a lack of experience and
knowledge, unless theyre under supervision or have received
instructions about the correct use of the device by the person who is
responsible for their safety.
19. This product is intended for non professional use only and not for
commercial or industrial use.
20. Make sure the unit is adjusted to a stable position. Damage caused by
using this product in an unstable position vibrations or shocks or by
failure to follow any other warning or precaution contained within this
user manual will not be covered by warranty.
21. Never remove the casing of this apparatus.
22. Never place this apparatus on other electrical equipment.
23. Do not allow children access to plastic bags.
24. Only use attachments/accessories specified by the manufacturer.
25. Refer all servicing to qualified service personnel. Servicing is required
when the apparatus has been damaged in any way, such as the power
supply cord or the plug, when liquid has been spilled or objects have
fallen into the apparatus, when the apparatus has been exposed to
rain or moisture, does not operate normally, or has been dropped.
26. Prolonged exposure to loud sounds from personal music players may
lead to temporary or permanent hearing loss.
27. If the product is delivered with power cable or AC power adaptor :
If any trouble occur, disconnect the AC power card and refer
servicing to qualified personnel.
5
To completely disconnect the power input, the mains plug of the
apparatus shall be disconnected from the mains, as the disconnect
device is the mains plug of apparatus.
Don’t step on or pinch the power adaptor. Be very careful,
particularly near the plugs and the cable’s exit point. Do not place
heavy items on the power adaptor, which may damage it. Keep the
entire device out of children’s reach! When playing with the power
cable, they can seriously injure themselves.
Unplug this device during lightning storms or when unused for a
long period.
The socket outlet must be installed near the equipment and must
be easily accessible.
Do not overload ac outlets or extension cords. Overloading can
cause fire or electric shock.
Devices with class 1 construction should be connected to a main
socket outlet with a protective earthed connection.
Devices with class 2 construction do not require a earthed
connection.
Always hold the plug when pulling it out of the main supply socket.
Do not pull the power cord. This can cause a short circuit.
Do not use a damaged power cord or plug or a loose outlet. Doing
so may result in fire or electric shock.
28. If the product contains or is delivered with a remote control
containing coin / cell batteries:
Warning:
“Do not ingest battery, Chemical Burn Hazard” or equivalent
working.
[The remote control supplied with] This product contains a coin /
button cell battery is swallowed, it can cause severe internal burns
in just 2 hours and can lead to death.
Keep new and used batteries away from children.
If the battery compartment does not close securely, stop using the
product and keep it away from children.
If you think batteries might have been swallowed or placed inside
any part of the body, seek immediate medical attention.
29. Caution about the use of Batteries:
Danger of explosion if battery is incorrectly replaced. Replace only
with the same or equivalent type.
Battery cannot be subjected to high or low extreme temperatures,
low air pressure at high altitude during use, storage or
transportation.
Replacement of a battery with an incorrect type that can result in
an explosion or the leakage of flammable liquid or gas.
6
Disposal of a battery into fire or a hot oven, or mechanically
crushing or cutting of a battery, that can result in an explosion.
Leaving a battery in an extremely high temperature surrounding
environment that can result in an explosion or that leakage of
flammable liquid or gas.
A battery subjected to extremely low air pressure that may result
in an explosion or the leakage of flammable liquid or gas.
Attention should be drawn to the environmental aspects of battery
disposal.
INSTALLATION
Unpack all parts and remove protective material.
Do not connect the unit to the mains before checking the mains
voltage and before all other connections have been made.
WARNING: When participating in the traffic listening to a
personal music player can make the listener less aware of
potential dangers such as approaching cars.
WARNING: To prevent possible hearing damage, do not listen
at high volume levels for long periods.
7
1. Get to know the controls on Player
Item
1
2
3
4
5
6
7
8
9
10
11
12
2. About Player Battery
Player has an internal, nonuser-replaceable battery. For best results,
the first time you use player, let it charge for about 2 ~ 3 hours or until
the battery status icon in the “Connect” screen shows that the battery is
in full.
Battery is full
Note: Player may continue use battery power after it’s been turned off.
For maintain the battery life and performance, if unit isn’t used for a
while, the battery need to be recharged, recharging the battery at least
once per month.
8
Warning:
Better use the original USB cable delivered with your MP3 player. This
cable is a data and charging cable. Some other USB cables in the market
are charging only cables. If you use a charging only cable to transfer data
from your computer to your player, it will only show the battery symbol
on the screen and will not be detected by your computer as an external
drive; this means that you cannot transfer any files from your computer
to your MP3 player.
Note :
The player contains a built-in temperature monitor sensor. If it senses
that the battery pack temperature is not in good condition it will control
and stop the charging function. The charging function will be
automatically restored when the detected battery pack temperature
returns to within normal limits.
a. Charging the Battery:
You can charge the player battery in two ways:
Connect player to your computer. Or,
Use the USB power charger. (not included)
b. Connection and Charging:
Once you have connected player with computer/power charger, then
you will see the “Choose connection” screen appear to choose and it
will switch to “Charge & Transfer mode automatically if no action in
4 ~ 6 seconds.
Choose “Charge & Transfer to upload or download the media files
with your computer and charging the Players battery.
Choose “Charge & Play to operates the Players function and the
battery charging in background.
The level bars are running in battery icon at the connecting screen.
The battery is in charging.
“Choose connect type”
“Charge & Transfer
“Charge & Play
9
Important: The battery does not charge when your computer is in sleep.
The USB port on most keyboards does not provide enough power to
charge the player. Connect player to a USB port on your computer only to
prevent charge problem.
3. Connecting and Disconnecting Player
a. To Connecting Player:
To connect player to your computer, plug the connector of USB Cable
into a USB port on your computer, and connect the other end to
player,
Then the player is ready for media files transfer with your computer
and the battery is charging when “Charge & Transfer mode is
selected. And the “Connect screen is appearing for view.
Now you can transfer the media files by using the computer mouse
use drag and place, or copy and paste, in between the player and
your computer.
b. To Disconnecting Player:
Its important not to disconnect player while its syncing or transferring
files. Eject the player before disconnect it.
To eject player, press once the M button, the connecting screen will
switch to “Main Menu” screen. And now is safe to disconnect the
player with your computer. Unplug the USB cable from the player. Or,
If you’re using a Windows PC, you can also eject player in My
Computer or by clicking the “Safely Remove Hardware” icon in the
Windows system tray, select the correspondence name of USB Device
and choose “Stop” or “Rejectfollow by the pop-up windows you’re
your computer.
If you’re using a Mac, you can also eject player by dragging the player
icon on the desktop to the Trash.
Disconnect the USB cable from the player and computer, simply
remove it.
If you accidentally disconnect player without ejecting it, reconnect it
to your computer and sync again. However, some media file may
loss.
4. Getting Start the Player
Turn ON/OFF the player and use of Main Menu:
To turn ON the player, press and hold the button for 3~4
seconds, then you will see any one of the following shown Main
Menu screen, Bluetooth / Music / Movie / Record / Picture / Setup
/ eBook”, will appear on LCD after the Loading and Opening screen
have displayed.
To turn OFF the player, press and hold the button for 3 ~
10
4 seconds.
“Main Menu”
5. Use Setup Menu
You might need to set date & time or change some default setting as you
desired in setup menu before you start to use the player.
To go into setup menu, from main menu, choose Setupby using the
/ and buttons, a Setup” menu appears to use;
For back to previous menu or main menu, press or pressing the
button during in setup menu and submenu.
Setup Menu
a. Sleep timer:
In Setup menu, choose Sleep timer, by using the / and
buttons then choose “Off” to switch off it. ( factory default is “Off”)
In Setup menu, choose Set sleep timer to switch On the sleep timer, a
levels bar with number appear to use, then choose
1 ~ 99” (Minutes) as you want by using the / and buttons.
The Player will turn off itself automatically as your desired time set.
b. Display settings:
You can set the backlight to illuminate the screen for a certain amount of
11
time as you desired, or make the backlight to “always On” when every
time you turn ON the player.
In Setup menu, choose “Display settings” > choose Backlight timer,
a list appear to use, then choseAlways On/
10/20/30 seconds” as you desired by using the / and
buttons. Choose Always On” to prevent the LCD backlight from
turning to off. (choosing this option decrease battery performance)
Choose “Screen saver > choose Digital clockor Screen off to turn
On and Off the screen saver function. Chosen digital clock to display
the date and time when the screen saver if in On.
c. Date & Time:
In Setup menu, choose Date and timeby using the / and
buttons, a list appears to use.
Set Time
Choose Time settings” to set clock, then choose “Set time format
or “Set time” as you want;
Choose “Set time format then choose “12 Hours/24 Hours” show
format as you desired.
Choose “Set time”, a clock interface will appear to set;
The “Hour/Minute” set item is highlighted, press M button to switch
in between Hour and Time which you want to set. And adjusting hour
and minute to current time by pressing the
/ button.
Finally, you need to press the button to confirm the adjustment
and the screen will back to previous menu.
Set Date
Choose “Date settings” to date, then choose “Set date format or
“Set date” as you want;
Choose “Set date format then choose YYYY MM DD/MM DD YYYY
which format as you desired.
Choose “ Set date”, a date interface will appear to set;
The YY/MM/DD” set item is highlighted, press M button to switch in
between day, month and year which you want to set. And adjusting
them to current date by pressing the / button.
Finally, you need to press the button to confirm the adjustment
and the screen will back to previous menu.
d. Language:
This player can use difference OSD languages.
To set the language, choose Language, and then choose which
language as you desired by using the / and buttons.
e. Information:
You can view about the player information and disk memory status, such
12
as firmware version, remaining memory space available and the number
of support media files available in player.
In Setup menu, choose Informationby using the / and
buttons, a list appears to use.
Choose “Player information” or “Disk space” which you want to
view.
f. Factory Settings:
In Setup menu, choose “Factory settings”, a dialog “Restore factory
settings? will pop up to confirm;
Choose Yes” to confirm. Or, “No” to abort.
Press button to exit Setup menu.
6. Use Bluetooth Menu
To Turn On the Bluetooth Function:
From the main menu, choose the Bluetooth function by using /
and buttons, a Bluetooth sub menu appears.
Search and Pair Bluetooth device.
NOTE: Before pairing, please make sure your Bluetooth Receiver Device
supports the Bluetooth A2DP profile.
Keep the device within a 1 meter range of your Bluetooth receiver
device. Power it On and set it into searching / pairing mode;
Turn the BT On in “BT Control” menu.
Then, in the Bluetooth list menu choose “Search Device” by using the
/ and buttons, the device will start searching for
approximately 10 ~ 20 seconds. Devices found will be listed on the
screen.
Choose your device from the on screen list and choose “Pair / connect
by using the / and button. Wait a few seconds, both
devices should be paired and a Bluetooth icon will show on the
display indicating the Bluetooth connection is ok. If the connection is
lost the color of the Bluetooth symbol will change to white
Choose Folders & songsin the Music menu list to directly select your
favorite music.
The player will switch to the “Now Playing screen. You now can
13
select Previous / Next / Play / Pause and adjust volume by using the
/ , and / buttons.
To exit the Bluetooth Transmission function, press the button
until you see the main menu icons. Select the Bluetooth menu. Select
‘BT control’ from the list and select ‘Turn BT off’ .
Bluetooth Function Limitation:
1. When you turn the player into Bluetooth audio transmitting mode, the
player earphone output sound will turned to Off automatically;
2. Fast-Forward and Fast Backward is not allowed to use in Bluetooth
mode.
7. Use Music Menu
You can use this music player to playback with almost full format of music
file of audio coding. To open the music player in Main Menu:
From main menu, choose “Music” by using the / and
buttons, a list menu appears to use;
Choose “Folders & songs/Artists/Albums/Genres/Playlist / Update
Playlist” as you desired;
Choose “Folder & songs” to enter all folders and songs list menu to
select you desired folder and song where start the play.
Choose Artists” to enter folder(s) list menu grouping by Artist name,
then choose who name of Artist folder > choose a song file in list
where start the play.
Choose Albums” to enter folder(s) list menu grouping by Album
name, then choose who name of Album folder > choose a song file in
list where start the play.
Choose Genres to enter folder(s) list menu grouping by Genres
name, then choose who name of Genres folder > choose a song file in
list where start the play.
Choose “Playlists” > choose “Playlist on the go [1] / Playlist on the go
[2] / Playlist on the go [3]” > select a song file where start to play.
(Add song files into playlist before you can use it, see add to playlist
section of the “Music submenu” part on page 16 for methods)
Choose “Update playlist to update the playlist when you found it
show incorrect; actually, it is normal due to some media files could be
manual deleted in players memory by user in some case. However,
update the playlist when necessary.
To switch Local Folder or Card Folder for Playback
The “Local Folder and “Card Folder items will be existed only in
music menu when Micro SD card has plugged into the player;
Choose “Local Folder to use players internal memory as current
location, you will see all supported song files will list out in playlist
when item selected. Or,
14
Choose “Card Folder to use Micro SD Card memory as current
location, you will see all supported song files will list out in playlist
when item selected. However, a “Create list or not will appear to
confirm when every time the Micro SD Card is plug in and used.
Choose Yes” to process, a playlist will be generated for use. Choose
“No” to abort.
Then, use “Folders & songs” Use “Folder & songs” item to select song
file for playback in normal case.
Remark:
All songs listed in Local Folder or Card Folder, the players system treated
them as only a single folder.
If you select song in this folder, in this case, the repeat folder function of
play mode will playback all them.
“Music Menu”
a. Play Music
In Folders & songs/Artists/Albums/Genres” list menu, choose a
song file to star the play using by using the / and
buttons. Then the music “Now playinginterface will appears to view
and use;
“Now Playing
b. Play/Pause
In music now playing interface;
Press the button to pause the playing music. Press it again to
resume.
c. Next/Fast-forward and Previous/Fast-backward
Press the button to play next music.
Press the button to play previous music.
Press and hold the button to use fast-forward
15
Press and hold the button to use fast-backward.
d. Adjust volume level
Press or pressing / button to adjust volume levels to up/down
and a volume control screen is appear for viewing.
Wait for 6 ~ 8 seconds or press the button to return to music
now playing screen.
For hearing protection; a display warning pop-up on display screen,
when first time to increase the volume level and reach to the default
setting level which may exceed 85dB. Press the M button to accept
the warning and enter into the volume control for increase the level
and until to maximum level.
Use Lyric Display
This player supports “*.LRC lyric files and lyrics can synchronous
displayed while playing music if you music file has lyric file included
together.
Make sure the music file name and the “*.LRCfile name must be
same and upload into player together. The embedded lyric song file
will not display lyric.
When the playing music included with lyrics file, then the lyrics
display mode will switched on automatically and the lyrics will display
at the music now playing interface.
8. Use Music Submenu
In music now playing interface, press the M button to enter to music
submenu, a music submenu “Play mode/Equalizer/ add to playlist /
remove from playlist/ Delete” is appear to choose;
Music Submenu Menu
a. Play mode:
In Music submenu;
Choose “Play mode”, a list menu “Repeat/Shuffle” appears to use;
Choose “Repeat” > choose “Repeat Off/Repeat 1/Repeat all/Repeat
folder as you desired play mode by using the / and
buttons.
Choose “Shuffle” > choose “Off/On” as you desired.
b. Equalizer
16
In Music submenu, Choose Equalizer, then choose
“Normal/Rock/Funk/Hip hop/Jazz/Classical/Techno” as you desired
sound effect by using the / and buttons.
Note : The equalizer function don’t work when using a Bluetooth
earphone/headphone. Only when using a cabled device the equalizer
function will work.
c. Add to playlist
When playing a song you would like to add to a playlist, press the “M”
button and use the / keys to go to the add to playlist
option and select with Then you can select the playlist you want to
add this song to;
Repeat the above steps to add more songs to your playlist(s)
To use the playlist you made. Select “playliston the main menu and
then select your favorite playlist
NOTE: It is possible to manually create a playlist for use with your mp3
player. You can use MediaMonkey for Windows computer. This is a
freeware mp3 manager/player in which you can create your own playlists.
The Xemio-760BT is compatible with .M3u playlist files. Instructions on
how to create playlists can be found on the website from MediaMonkey.
You can find the information and download MediaMonkey from
www.mediamonkey.com
d. Remove from playlist
When you are playing music from the playlist and want to remove the
current song from the list the you press the “M” button.
Select “Remove from playlist and select the playlist you’re currently
using.
A dialog screen will appear
Choose “Yes” to confirm or choose “No” to abort.
Repeat the above steps if you want to remove more music files from
the playlist.
e. Delete:
In Music submenu, choose Delete fileby using the / and
buttons;
A “song name…” delete? dialog is appear to confirm, choose Yes” to
confirm delete the current song file in memory;
A deleting dialog is appears for few seconds and the current song
file is deleted. And the next songs file is selected to play
automatically.
Choose “No” to abort.
9. Use Video Menu
a. Play Video
17
From Main Menu, choose Video by using the / and
buttons, a files list appears to choose;
Choose the desired file to start the play and the screen switch to
movie now playing screen. The movie is playing automatically.
b. Play/Pause Video
In movie now playing screen, press the button to pause.
Press it again to resume.
Press button to go back files list screen for choose another movie
file to play if you want it.
c. Play Previous or Next file
Press the button to play next file.
Press the button to play previous file.
d. Fast-Forward or Fast-Backward
Press and hold the button to play fast-forward.
Press and hold the button to play fast-backward.
e. Adjust Volume Level
In movie now playing screen,
Press or pressing the button to increase the volume level.
Press or pressing the button to decrease the volume level.
Wait for 6 ~ 8 seconds or press the button to return to movie
now playing screen.
For hearing protection; a display warning pop-up on display screen,
when first time to increase the volume level and reach to the default
setting level which may exceed 85dB. Press the M button to accept
the warning and enter into the volume control for increase the level
and until to maximum level.
Note: Activate volume will pause the video. Play will resume and at no
key input after 6 seconds.
10. Use Video Submenu
You might need to change the play mode or delete some unwanted
movie files. To do this:
In movie now playing screen, press the M button, a movie submenu
“Repeat/Delete video/Update Playlist is appear to choose;
a. Repeat:
Choose “Repeat” > choose “Repeat off/Repeat 1/Repeat all” as you
desired play mode by using the / and buttons.
b. Delete Video:
Choose “Delete Video” by using the / and buttons;
A “video name…” delete? dialog is appear to confirm, choose Yes” to
confirm delete the current song file in memory;
A deleting dialog is appears for few seconds and the current song
file is deleted. And the next movie’s file is selected to play
18
automatically.
Choose “No” to abort.
c. Update playlist:
Choose “Update playlist to update the playlist when you found it
show incorrect; actually, it is normal due to some media files could be
manual deleted in players memory by user in some case. However,
update the playlist when necessary.
11. Convert Video files intoAVI
This tool can be used to transform those video files into AVI format files
on the computer before upload them to your player. Recommended use
AVI for avoids video codec issues on your computer.
To install this video convert tool to your computer, open a folder
named “UTILITIES > Video Conversion Software” which stored in your
players internal memory. (Download it onto your computer for copy
and installation)
Select “Setup” to start the install program, the software will
automatically install to your computer.
After installation is done, open folder “Media Player Utilities> click
program “AMV&AVI Video converter in All Program bar on your
window PC. The program interface as shown below:
Noted: This program is used to convert video files into AVI format,
currently only AVI format is supported by this player.
Then click to choose the folder where to save the convert files,
and then click to select the folder where the original files are.
The original file will show in the file window once selected.
19
Move the mouse arrow and left click mouse on the unconverted
source files to select with highlight in the file window, then the
icon will be highlighted into icon. Now click this icon and a
dialog box will be shown.
Now click this icon and a dialog box will be shown.
Make sure Video type is AVI” and screen width and height is
“208x176/320x240” selected. Video convert and Image quality
should be “Middle” and “High” as defaulted. Click “OK” to confirm
20
the setting.
Now click to start converting.
After conversion, the AVI files will play automatically for preview.
And now, the converted AVI file is ready to transfer, you can simply
copy and place those converted files to the media player.
12. Use Record Menu
You can use the player as a Voice Recorder and recording voice memos
using the built-in microphone. Besides, look for the recorded file(s) and
playback them in same menu. To do this:
From main menu, choose Record by using / and
buttons, a list menu appear to choose;
a. Start Voice Recording:
From list menu, choose “Start Voice Recording”, a “Now Recording”
screen appear to view and it is in recording.
Now Recording Screen
To Start/Pause Recording
In recording mode, press the button to pause the recording.
Press the button again to resume recording.
To Save and Stop Recording File
Press the button, a save recording? dialog pop up to confirm;
Choose Yes” to confirm, the recorded file will save into memory and
back to the list menu for next action.
Choose “No” to abort.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72
  • Page 73 73
  • Page 74 74
  • Page 75 75
  • Page 76 76
  • Page 77 77
  • Page 78 78
  • Page 79 79
  • Page 80 80
  • Page 81 81
  • Page 82 82
  • Page 83 83
  • Page 84 84
  • Page 85 85
  • Page 86 86
  • Page 87 87
  • Page 88 88
  • Page 89 89
  • Page 90 90
  • Page 91 91
  • Page 92 92
  • Page 93 93
  • Page 94 94
  • Page 95 95
  • Page 96 96
  • Page 97 97
  • Page 98 98
  • Page 99 99
  • Page 100 100
  • Page 101 101
  • Page 102 102
  • Page 103 103
  • Page 104 104
  • Page 105 105
  • Page 106 106
  • Page 107 107
  • Page 108 108
  • Page 109 109
  • Page 110 110
  • Page 111 111
  • Page 112 112
  • Page 113 113
  • Page 114 114
  • Page 115 115
  • Page 116 116
  • Page 117 117
  • Page 118 118
  • Page 119 119
  • Page 120 120
  • Page 121 121
  • Page 122 122
  • Page 123 123
  • Page 124 124
  • Page 125 125
  • Page 126 126
  • Page 127 127
  • Page 128 128
  • Page 129 129
  • Page 130 130
  • Page 131 131
  • Page 132 132
  • Page 133 133
  • Page 134 134
  • Page 135 135
  • Page 136 136
  • Page 137 137
  • Page 138 138
  • Page 139 139
  • Page 140 140
  • Page 141 141
  • Page 142 142
  • Page 143 143
  • Page 144 144
  • Page 145 145
  • Page 146 146

Lenco Xemio-760 BT Black Le manuel du propriétaire

Catégorie
Lecteurs MP3 / MP4
Taper
Le manuel du propriétaire
Ce manuel convient également à