Sony KV-AW21M81 Le manuel du propriétaire

Sony KV-AW21M81 Group B39 (GB, FR, PR, AR)_2-693-843-13 (1)

KV-AW21

2-693-843-13 (1)

M81

M80

Trinitron Color TV

Mode d’emploi

•Avant de faire fonctionner cet appareil, lisez attentivement le présent

mode d’ emploi et conservez-le pour toute référence ultérieure.

ULM«— tÇdœ

•DHU q «“—Ës dœÊ œ~UÁ¨ œdÇt —«MLU —« U œX u«Ob Ët MEu— d«Ft

FbÈ «Ê —«~t œ«—bÆ

 

•  ,       !"#$%& ' ()

*$+-./

GB

Operating Instructions

• Before operating the unit, please read this manual thoroughly and retain

it for future reference.

AR

PR

FR

01GB01COV-SOEMME.p65 11/21/06, 4:44 PM1

Black

Sony KV-BZ21M81 Group B39 (GB, FR, PR, AR)_2-693-843-13 (1)

2

GB

Clean the TV with a dry and soft

cloth. Do not use benzine, thinner,

or any other chemicals to clean the

TV. Do not attach anything (e.g.,

adhesive tape, cellophane tape,

glue) on the painted cabinet of the

TV. Do not scratch the picture

tube.

WARNING

• Dangerously high voltages are present inside the TV.

• TV operating voltage: 110 – 240 V AC.

• Do not plug in the power cord until you have completed making all other

connections; otherwise a minimum leakage current might flow through the antenna

and other terminals to ground.

•To avoid battery leakage and damage to the remote, remove the batteries from the

remote if you are not going to use it for several days. If any liquid leaks from the

batteries and touches your skin, immediately wash it away with water.

Install the TV on a stable TV stand

and floor which can support the

TV set weight. Ensure that the TV

stand surface is flat and its area is

larger than the bottom area of the

TV.

Do not plug in too many

appliances to the same power

socket. Do not damage the power

cord.

For children’s safety, do not leave

children alone with the TV. Do not

allow children to climb onto it.

For your own safety, do not touch

any part of the TV, the power cord

and the antenna cable during

lightning storms.

Do not place any objects on the TV.

The apparatus shall not be

exposed to dripping or splashing

and that no objects filled with

liquids, such as vases, shall be

placed on the apparatus.

Do not operate the TV if any liquid

or solid object falls into it. Have it

checked immediately by qualified

personnel only.

Do not block the ventilation

openings of the TV. Do not install

the TV in a confined space, such

as a bookcase or built-in cabinet.

Do not open the cabinet and the

rear cover of the TV as high

voltages and other hazards are

present inside the TV. Refer

servicing and disposal of the TV

to qualified personnel.

Pull the power cord out by the

plug. Do not pull the power cord

itself. Even if your TV is turned

off, it is still connected to the AC

power source (mains) as long as

the power cord is plugged in.

Unplug the TV before moving it

or if you are not going to use it for

several days.

To prevent fire or shock hazard, do

not expose the TV to rain or

moisture.

Your TV is recommended for

home use only. Do not use the TV

in any vehicle or where it may be

subject to excessive dust, heat,

moisture or vibrations.

01GB02WAR-SOEMME.p65 11/21/06, 4:45 PM2

Black

Sony KV-BZ21M81 Group B39 (GB, FR, PR, AR)_2-693-843-13 (1)

3

GB

Table of Contents

Installation

Getting Started ................................................................................................................ 4

Setting up your TV (“Initial Setup”) ........................................................................... 5

Connecting optional components ................................................................................ 6

Overview of Controls

TV buttons and remote control ..................................................................................... 7

Menu Adjustment

WEGA GATE navigator ................................................................................................. 9

“Picture” setting............................................................................................................ 10

“Sound” setting ............................................................................................................. 11

“Channel Setup” setting .............................................................................................. 12

“Setup” setting .............................................................................................................. 14

Additional Information

Troubleshooting ............................................................................................................ 15

Specifications .................................................................................................. Back cover

01GB03TOC-SOEMME.p65 11/21/06, 4:45 PM3

Black

Sony KV-BZ21M81 Group B39 (GB, FR, PR, AR)_2-693-843-13 (1)

4

GB

b

x Getting Started

Step 2

End

Select

Confirm

b

Step 1

Step 3

Step 4

Insert the batteries (supplied) into the remote.

• Do not use old or different types of batteries together.

Connect the antenna cable (not supplied) to 8

(antenna input) at the rear of the TV.

• You can also connect your TV to other optional

components (see page 6).

Plug in the power cord, then press 1 on the TV to turn

it on.

• The 1 (standby) indicator flashes green for a few seconds

when turning on the TV. This does not indicate a

malfunction.

Set up the TV by following the instructions of the

“Initial Setup” menu (see page 5).

01GB04INS-SOEMME.p65 11/21/06, 4:45 PM4

Black

Sony KV-BZ21M81 Group B39 (GB, FR, PR, AR)_2-693-843-13 (1)

5

GB

Program Sorting/Edit

01

02

03

04

Off

Sorting:

Edit:

PROG

SkipLabel

Exit

Select

Confirm

End

Select

Confirm

Initial Setup

Language:

English

Start Auto Program now?

Yes

No

First please connect

cable/ antenna

Initial Setup

End

Select

Confirm

x

Setting up your TV (“Initial Setup”)

When you turn on your TV for the first time, the “Initial Setup” menu will

appear. You can adjust settings below using the buttons on the remote control or

TV front panel. Press V , v , B or b to select or adjust items, then press

.

1

Select the desired menu language.

2

Select “Yes” to preset the channels automatically.

To skip automatic channel presetting, select “No”.

3

The “Program Sorting/Edit” menu enables

you to sort and edit the channels (see page 12).

4

Adjust the bars on the top and bottom of the menu

if they are slanted (KV-AW21M81 only).

5

To prevent this “Initial Setup” menu from appearing

again when you turn on the TV by pressing 1,

select “No”.

To allow this menu to appear again, select “Yes”.

•You can immediately go to the end of the “Initial Setup” menu by pressing WEGA

GATE.

Select

Confirm

Initial Setup

Display this menu next time?

Yes

No

End

Select

Confirm

01GB04INS-SOEMME.p65 11/21/06, 4:45 PM5

Black

Sony KV-BZ21M81 Group B39 (GB, FR, PR, AR)_2-693-843-13 (1)

6

GB

1

R

Y

C

B

C

R

L

Y

R

L

C

B

C

R

L

(MONO)

L

R

(MONO)

L

x Connecting optional components

You can connect a wide range of optional components to your TV. Connecting

cables are not supplied.

Connecting to the TV (front)

Connecting to the TV (rear)

Camcorder

Audio/Video

cable

• If you connect a VCR to 8 (antenna input), preset the signal output from the VCR to the

program number 0 on the TV (see page 13).

• If your DVD player can output interlace and progressive mode signals, select the

interlace output when connecting to (component video input) on your TV. Your TV

can receive either 525i/60Hz or 625i/50Hz interlace signals.

• The component video terminals on your DVD player are sometimes labeled Y/CB/CR,

Y/PB/PR, Y/Cb/Cr or Y/B-Y/R-Y.

• If you select “DVD” on your TV screen, the signal from the T (monitor output) jacks

will not be output properly. This does not indicate a malfunction.

Audio

cable

Audio/

Video

cable

Component

Video cable

Antenna

cable

VCR DVD Player

Audio

System

VCR

DVD Player

Audio/

Video cable

01GB04INS-SOEMME.p65 11/21/06, 4:45 PM6

Black

Sony KV-BZ21M81 Group B39 (GB, FR, PR, AR)_2-693-843-13 (1)

7

GB

x TV buttons and remote control

1 1 Turn off or turn on the TV.

2 Remote control sensor.

3 Wake Up indicator.

3 1 Standby indicator.

4 PROG +/– Select program number.

5 2 +/– Adjust volume.

6 t Select TV or video input.

WEGA GATE menu operations (see page 9)

4,5 V,v,B,b Select or adjust items.

6

Confirm selected items.

7 WEGA GATE Display or cancel WEGA GATE menu.

TV

1

2

3

4

6

7

8

9

0

5

PROG

A/B

1

2

3

7

4

5

qj

qk

qa

qd

qf

qh

RETURN

6

8

9

0

w;

ql

qg

qs

WEGA

GATE

1 ?/1 Turn off temporarily or turn on the

TV.

2 a Display the TV program.

3 Jump to last program number that

has been watched for at least five

seconds.

4 PROG +/– Select program number. To select

quickly, press and hold until the

desired program number appears.

5 2 +/– Adjust volume.

8 Not function for your TV.

9 Not function for your TV.

0

Display on-screen information.

qa Mute the sound.

qs A/B Not function for your TV.

qd t Select TV or video input.

qf 0-9 Input numbers. For program numbers

10 and above, enter the second

digit within two seconds.

L

R

2

(MONO)

WEGA

PROG

GATE

PROG

WEGA

GATE

4

32

1

567

continue

01GB05INS-SOEMME.p65 11/21/06, 4:45 PM7

Black

Sony KV-BZ21M81 Group B39 (GB, FR, PR, AR)_2-693-843-13 (1)

8

GB

TV buttons and remote control (continued)

ql Not function for your TV.

w; Select picture mode options: “Vivid”, “Standard”, “Custom”*

(see page 10).

* When the “Custom” mode is selected, you can receive the last adjusted

picture settings from the “Picture Adjustment” option in the menu.

WEGA GATE menu operations (see page 9)

6 Confirm selected items.

7 WEGA GATE Display or cancel WEGA GATE menu.

qj V, v, B, b Select or adjust items.

qk RETURN Return to the previous level.

Timer operations

qg Set TV to turn on automatically according to the desired period of time

(Wake Up Timer) (max. of 12 hours). The indicator on TV lights up amber once you set

the wake up timer. If no buttons or controls are pressed for more than

one hour after the TV is turned on using the wake up timer, the TV

automatically goes into standby mode.

qh Set TV to turn off automatically according to the desired period of time

(Sleep Timer) (max. of one hour and 30 min.).

Teletext operations (green icon) (KV-AW21M81 only)

Display Teletext broadcast: Teletext t Teletext and TV t TV. If there is

no Teletext broadcast, only “100” is displayed at the top left corner of the

screen.

Display Teletext service contents.

0-9 Input three digits Teletext page number.

,

Display the next or previous page.

Stop Teletext display from scrolling.

Reveal concealed information.

Enlarge the Teletext display.

Show TV screen while waiting for Teletext page. Enter the Teletext page

number that you want to refer to, then press . When the page number

is displayed, press to show the text.

(red, green, Access the corresponding colored FASTEXT menu. The FASTEXT

yellow, blue) feature can be used only when the FASTEXT broadcast is available.

PIP operations

, , V, v, B, b Not function for your TV.

01GB05INS-SOEMME.p65 11/21/06, 4:45 PM8

Black

Sony KV-BZ21M81 Group B39 (GB, FR, PR, AR)_2-693-843-13 (1)

9

GB

01

02

03

04

05

TV

Confirm

Select

End

01

02

03

04

05

TV

Confirm

Select

End

01

02

03

04

05

TV

Confirm

Select

End

External Inputs

Confirm

Select

End

Video 1

1

2

DVD

Video 2

Confirm

End

Picture

Color Temperature: Cool

Picture Adjustment

Picture Mode: Vivid

Intelligent Picture: On

Signal Level Indicator: On

Select

x WEGA GATE navigator

WEGA GATE is a gateway that allows you access to preset TV channels,

connected external inputs and “Settings” menu.

watch the preset TV

channels (see page 5)

select the inputs for the

connected equipment

(see page 6)

change the settings

of your TV (see

page 10 - 14)

How to use WEGA GATE

(1) Press WEGA GATE to display or cancel

the WEGA GATE menu.

Confirm

Select

WEGA GATE

Settings

External Inputs

TV

(2) Press (or b) to confirm your selection

or go to the next level.

(4) Press RETURN to move to the previous

level.

(3) Press V or v to select the desired item.

“TV”

“External Inputs”

“Settings”

Confirm

Select

WEGA GATE

Settings

External Inputs

TV

Confirm

Select

WEGA GATE

Settings

External Inputs

TV

• When a feature is dimmed in the menu, it is not selectable.

• The WEGA GATE, and V,v,B,b buttons on the front panel can also be used for

the operations above.

01GB06AVD-SOEMME.p65 11/21/06, 4:46 PM9

Black

Sony KV-BZ21M81 Group B39 (GB, FR, PR, AR)_2-693-843-13 (1)

10

GB

Confirm

End

Picture

Color Temperature: Cool

Picture Adjustment

Picture Mode: Vivid

Intelligent Picture: On

Signal Level Indicator:

On

Select

x “Picture” setting

Press WEGA GATE and select “Settings”.

Make sure the “Picture” icon (

) is selected,

then press

.

“Picture Mode” Choose either “Vivid” (bright, contrast and sharp),

“Standard” (normal) or “Custom”*.

“Color Temperature” Adjust white color tint.

Choose either “Cool” (blue tint), “Neutral” (neutral tint) or

“Warm” (red tint).

“Intelligent Picture” Optimize picture quality.

Press V or v to select “On”, then press .

To cancel, select “Off”, then press .

“Signal Level Indicator” Display the signal level when the “Intelligent Picture” is

functioning.

“Intelligent Picture Signal Level” indicator will be displayed,

followed by picture improvement when you change the

program number or the input mode.

red amber green

(weak) (average) (good)

Press V or v to select “On”, then press .

To cancel, select “Off”, then press . “Intelligent Picture” is

still functioning.

*You can adjust the setting to your personal preference in the “Picture Adjustment” and

“Color Temperature” options only when the “Custom” mode is selected.

Adjusting the “Picture Adjustment” items under “Custom”

mode

1

Press V or v to select either “Picture” (contrast), “Brightness”, “Color”,

“Hue” (color tones) or “Sharpness”, then press

.

Selecting “Reset” will set your TV to the factory settings.

2

Press V,v,B or b to adjust the setting of your selected item, then press .

3

Repeat the above steps to adjust other items.

The adjusted settings will be received when you select “Custom”.

• “Hue” can be adjusted for the NTSC color system only.

• Reducing “Sharpness” can also reduce picture noise.

01GB06AVD-SOEMME.p65 11/21/06, 4:46 PM10

Black

Sony KV-BZ21M81 Group B39 (GB, FR, PR, AR)_2-693-843-13 (1)

11

GB

Confirm

End

Sound

Select

Balance

x “Sound” setting

Press WEGA GATE and select “Settings”.

Press V or v to select the “Sound” icon (

),

then press

.

“Balance” Press v or B to emphasize the left speaker.

Press V or b to emphasize the right speaker.

01GB06AVD-SOEMME.p65 11/21/06, 4:46 PM11

Black

Sony KV-BZ21M81 Group B39 (GB, FR, PR, AR)_2-693-843-13 (1)

12

GB

x

“Channel Setup” setting

Press WEGA GATE and select “Settings”.

Press V or v to select the “Channel Setup”

icon (

), then press .

“Auto Program” Preset channels automatically.

“Manual Program” Manually preset desired channels and channels that cannot

be preset automatically (see Presetting channels manually

in page 13).

“Program Sorting/Edit”

Sort and edit the channels.

(a) If you wish to keep the channels in the current condition,

press WEGA GATE to exit.

(b) Press

V or v to select the program number with the

channel you wish to change. The selected channel will

appear on the screen.

(c) If you wish to store the channels in a different order:

(1) Press b to enter sorting mode.

(2) Press V or v to select the new program number

position for your selected channel, then press B.

(d) If you wish to edit the channels, press to change to

edit mode.

Press b until the mode that you wish to edit is

highlighted: Label, Skip, (block symbol). Then press

.

(1) To label, press V or v to select the alphanumeric

characters for the label. Then press .

(2) To skip the program number, press V or v to select

“On”. Then press .

You can skip this program number when using

PROG +/–.

(3) To block unwanted program number, press V or v to

select . Then press .

(e) Repeat step (b) to (d) if you wish to change other

channels.

Press WEGA GATE to exit.

• If you preset a blocked program number, that program number will be unblocked

automatically.

• If you sort a blocked program, that program will remain blocked.

Confirm

End

Channel Setup

Select

Auto Program

Manual Program

Program Sorting/Edit

01GB06AVD-SOEMME.p65 11/21/06, 4:46 PM12

Black

Sony KV-BZ21M81 Group B39 (GB, FR, PR, AR)_2-693-843-13 (1)

13

GB

01

Presetting channels manually

1

After selecting “Manual Program”, select the program

number to which you want to preset a channel.

(1) Make sure “Program” is selected, then press

.

(2) Press V or v

until the program number you want

to preset appears on the menu, then press

.

2

Select the desired channel.

(1) Make sure either “VHF Low”, “VHF High” or “UHF” is selected, then press

.

(2) Press V or v until the desired channel’s broadcast appears on the TV screen,

then press .

3

If the sound of the desired channel is abnormal, select the appropriate TV

system.

(1) Press V or v

to select “TV System”, then press .

(2) Press V or v

until the sound becomes normal, then press .

4

If you are not satisfied with the picture and sound quality, you may be able

to improve them by using the “Fine” tuning feature.

(1) Press V or v

to select “Fine”, then press .

(2) Press V or v

to select “Manual”, then press .

(3)

Press V,v,B or b until the picture and sound quality are optimal, then press .

The + or – icon on the menu flashes while tuning.

5

If the TV signal is too strong (picture distorted; picture with lines; signal

interference) or weak (snowy picture), you may be able to improve the

picture quality by setting the “Signal Booster” feature.

(1) Press V or v

to select “Signal Booster”, then press .

(2) Press V or v

to select either “Off” (for picture distorted; picture with lines;

signal interference) or “Auto” (for snowy picture), then press

.

01GB06AVD-SOEMME.p65 11/21/06, 4:46 PM13

Black

Sony KV-BZ21M81 Group B39 (GB, FR, PR, AR)_2-693-843-13 (1)

14

GB

x

“Setup” setting

Press WEGA GATE and select “Settings”.

Press V or v to select the “Setup” icon (

),

then press .

“Language” Change the menu language.

Press V or v to select either “English” or “ ” (Arabic), then

press .

“Picture Rotation” Adjust the picture position when it is not aligned with the TV

(KV-AW21M81 only) screen.

Press B or b to adjust the picture position, then press .

“Video Label” Label the connected equipment.

(1) Select “Video Input” and press . Press V or v to select the

input you want to label, then press .

(2) Select “Label” and press , then press V or v to select

the label options: “Video 1”/“Video 2” / “DVD”, “VCR”,

“SAT”, “Game” or “Edit”*.

* You may edit the video label to your favorite name. Press V or v

to select alphanumeric characters for the label, then press .

“Color System” Select the color system.

Press V or v to select either “Auto”, “PAL”, “SECAM”,

“NTSC3.58” or “NTSC4.43”, then press . Normally, set this to

“Auto”.

“Factory Settings”

Reset your TV to factory settings.

Press and press V or v to select “Yes”. Then press .

Your TV will go blank for a few seconds, then the “Initial Setup”

menu will appear.

To cancel, select “No”, then press .

Confirm

End

Setup

Select

Language:

Picture Rotation

Video Label

Color System: Auto

Factory Settings

English

01GB06AVD-SOEMME.p65 11/21/06, 4:46 PM14

Black

Sony KV-BZ21M81 Group B39 (GB, FR, PR, AR)_2-693-843-13 (1)

15

GB

x Troubleshooting

If you find any problem while viewing your TV, you can either use the

“Factory Settings” function (see page 14) or check the Troubleshooting guide

below. If the problem persists, contact your Sony dealer.

Snowy picture, noisy sound

• Check the antenna setup and other connections.

•Preset the channel manually again (see page 13).

• Set the “Signal Booster” to “Auto” (see page 13) or try using an external booster.

Distorted picture, noisy sound

• Set the “Signal Booster” to “Off” (see page 13), or turn off or disconnect any external

booster in use.

Good picture, noisy sound

• Select the appropriate “TV System” (see page 13).

No picture, no sound

• Check the power cord, antenna setup and other connections.

•Press 4/1 (power) to turn on the TV.

•Press 1 (main power) on the TV to turn off the TV for about five seconds, then turn it on

again.

Good picture, no sound

•Press 2 + to increase the volume level or press to cancel the muting.

Dotted lines or stripes

• Do not use a hair dryer or other equipment near the TV.

• Check the antenna setup.

Double images or “ghosts”

• Use the fine tuning (“Fine”) function (see page 13).

• Check the antenna setup or use a highly directional antenna.

•Turn off or disconnect any external booster in use.

No color

• Adjust the “Color” level from “Picture Adjustment” (see page 10).

• Select the appropriate “Color System” (see page 14).

• Check the antenna setup.

Picture slant

• Keep external speakers or other electrical equipment away from the TV.

• Adjust the “Picture Rotation” (KV-AW21M81 only) (see page 14).

Abnormal color patches

• Keep external speakers or other equipment away from the TV. Do not move the TV while

the TV is turned on. Press 1 (main power) on the TV to turn off the TV for about 15

minutes, then turn it on again to demagnetize the TV.

Teletext display is incomplete (snowy picture or double images) (KV-AW21M81 only).

• Check the antenna setup and other connections.

• Set the “Signal Booster” to “Auto” (see page 13) or try using an external booster.

• Use the fine tuning (“Fine”) function (see page 13).

The 1 (standby) indicator on your TV flashes red several times after every three seconds.

• Count the number of times the 1 (standby) indicator flashes. Press 1 (main power) to

turn off your TV. Contact your nearest Sony service center.

continue

01GB07ADJ-SOEMME.p65 11/21/06, 4:46 PM15

Black

Sony KV-BZ21M81 Group B39 (GB, FR, PR, AR)_2-693-843-13 (1)

16

GB

The TV screen sometimes goes blank for slightly longer than usual during channel change.

• The “Signal Booster” is functioning to detect a weak signal. This does not indicate a

malfunction.

TV cabinet creaks.

• Changes in room temperature sometimes make the TV cabinet expand or contract, causing

a noise. This does not indicate a malfunction.

A small “boom” sound is heard when the TV is turned on.

• The TV’s demagnetizing function is working. This does not indicate a malfunction.

Troubleshooting (continued)

01GB07ADJ-SOEMME.p65 11/21/06, 4:46 PM16

Black

Sony KV-BZ21M81 Group B39 (GB, FR, PR, AR)_2-693-843-13 (1)

2

FR

Nettoyez le téléviseur à l’aide d’un

chiffon doux et sec. N’utilisez pas

de benzine, de diluant ou tout autre

produit chimique pour nettoyer le

téléviseur. Ne rien attacher (par

exemple: bande adhésive, ruban de

cellophane, colle) au coffret peint

(argent) du téléviseur. Veillez à ne

pas rayer le tube image.

AVERTISSEMENT

• Cet appareil fonctionne avec de très hautes tensions dangereuses.

• Tension de service du téléviseur : 110 – 240 V CA.

• Ne branchez pas le cordon d’alimentation avant d’avoir terminé tous les autres

raccordements. Sinon, il se peut qu’un faible courant de fuite passe via l’antenne et

d’autres bornes vers la terre.

• Afin d’éviter toute fuite des piles qui pourrait abîmer la télécommande, retirez-les

de la télécommande si vous ne l’utilisez pas pendant plusieurs jours. Si vous

touchez le liquide s’étant échappé des piles, rincez immédiatement à l’eau.

Installez le téléviseur sur une

surface plane et une table TV

stable et qui peuvent supporter le

poids du téléviseur. S’assurer que

la surface de la table TV est plus

large que le dessous du téléviseur.

Ne branchez pas trop d’appareils

électriques sur la même prise

d’alimentation. Veillez à ne pas

endommager le cordon

d’alimentation.

Dans la sécurité de vos enfants, ne

les laissez jamais regarder la

télévision seuls. Ne laissez pas les

enfants grimper dessus.

Pour votre propre sécurité, ne

touchez aucun des composants du

téléviseur ni le câble

d’alimentation ou le câble

d’antenne durant les orages

accompagnés de foudre.

Ne pas poser d’objets sur le

téléviseur. L’appareil ne doit pas

être exposé à des éclaboussures et

aucun objet contenant un liquide,

comme un vase, ne doit être posé

sur le téléviseur.

Ne faites pas fonctionner le

téléviseur si des liquides ou des

solides ont pénétré à l’intérieur.

Faites-le immédiatement contrôler

par le personnel qualifié.

N’installez pas le téléviseur dans

un espace confiné comme une

bibliothèque ou un meuble

encastré. Veillez à ne pas obstruer

les ouïes de ventilation du

téléviseur.

N’ouvrez pas le châssis ou le capot

arrière du téléviseur. Vous seriez

en effet exposé à des parties

soumises à de hautes tensions et

à d’autres composants dangereux.

Contactez un technicien qualifié

lorsque vous souhaitez faire

réparer ou vous débarrasser du

téléviseur.

Pour prévenir tout risque

d’incendie ou d’électrocution,

gardez cet appareil à l’abri de la

pluie et de l’humidité.

Débranchez le câble d’alimentation

en le saisissant par la fiche. Même

si votre téléviseur est hors tension,

il reste connecté à la source

d’alimentation secteur tant que le

cordon d’alimentation est branché.

Débranchez le téléviseur avant de

le déplacer ou lorsque vous ne

l’utilisez pas pendant plusieurs

jours.

Votre téléviseur n’est conçu que

pour un usage domestique.

N’utilisez pas le téléviseur dans un

véhicule ou à des endroits sujets à

de la poussière, de la chaleur, de

l’humidité ou des vibrations

excessives.

02FR02WAR-SOEMME.p65 2/14/07, 3:14 PM2

Black

Sony KV-BZ21M81 Group B39 (GB, FR, PR, AR)_2-693-843-13 (1)

3

FR

Table des matières

Installation

Préparation ...................................................................................................................... 4

Configuration de votre téléviseur («Initial Setup») ................................................... 5

Raccordement d’appareils en option ........................................................................... 6

Présentation des commandes

Touches du téléviseur et télécommande ..................................................................... 7

Réglage de votre configuration (MENU)

Navigateur WEGA GATE .............................................................................................. 9

Réglage «Picture» ......................................................................................................... 10

Réglage «Sound» .......................................................................................................... 11

Réglage «Channel Setup» ............................................................................................ 12

Réglage «Setup» ............................................................................................................ 14

Informations complémentaires

Dépannage ..................................................................................................................... 15

Spécifications .................................................................................... Couverture arriére

02FR03TOC-SOEMME.p65 2/14/07, 3:14 PM3

Black

Sony KV-BZ21M81 Group B39 (GB, FR, PR, AR)_2-693-843-13 (1)

4

FR

b

x Préparation

2e étape

End

Select

Confirm

b

1re étape

3e étape

4e étape

Introduisez les piles (fournies) dans la télécommande.

• N’utilisez pas des piles usagées et des piles de type

différent en même temps.

Raccordez le câble de l’antenne (non fourni) sur 8

(entrée antenne) à l’arrière du téléviseur.

• Vous pouvez aussi raccorder votre téléviseur à d’autres

appareils en option (voir page 6).

Branchez le cordon d’alimentation, puis appuyez sur la

touche 1 du téléviseur pour le mettre sous tension.

• Le témoin 1 (veille) s’allume en vert pendant quelques

secondes au moment de la mise sous tension du téléviseur.

Ceci n’indique aucun problème de fonctionnement.

Configurez le téléviseur en suivant les directives du

menu «Initial Setup» (voir page 5).

02FR04INS-SOEMME.p65 2/14/07, 3:14 PM4

Black

Sony KV-BZ21M81 Group B39 (GB, FR, PR, AR)_2-693-843-13 (1)

5

FR

Program Sorting/Edit

01

02

03

04

Off

Sorting:

Edit:

PROG

SkipLabel

Exit

Select

Confirm

End

Select

Confirm

Initial Setup

Language:

English

Start Auto Program now?

Yes

No

First please connect

cable/ antenna

Initial Setup

End

Select

Confirm

x

Configuration de votre téléviseur

(«Initial Setup»)

La première fois que vous mettez votre téléviseur sous tension, le menu «Initial

Setup» s’affiche. Vous pouvez effectuer les réglages ci-dessous à l’aide des

touches de la télécommande ou du panneau avant du téléviseur. Appuyez sur

V , v , B ou b pour sélectionner ou régler les options, puis appuyez sur

.

1

Sélectionnez la langue souhaitée pour

les menus.

2

Sélectionnez «Yes» pour prérégler automatiquement

les canaux.

Si vous ne souhaitez pas effecteur la présélection

automatique des chaînes, sélectionnez «No».

3

Le menu «Program Sorting/Edit» vous permet de

classer et de modifier les canaux (voir page 12).

4

Réglez les barres situées en haut et en bas du menu si

elles sont inclinées (KV-AW21M81 uniquement).

5

Pour éviter que le menu «Initial Setup» n’apparaisse

de nouveau lorsque vous mettez le téléviseur sous

tension à l’aide de 1, sélectionnez «No».

Pour permettre d’afficher de nouveau ce menu,

sélectionnez «Yes».

•Vous pouvez passer directement à la fin du menu «Initial Setup» en appuyant sur

WEGA GATE.

Select

Confirm

Initial Setup

Display this menu next time?

Yes

No

End

Select

Confirm

02FR04INS-SOEMME.p65 2/14/07, 3:14 PM5

Black

La page charge ...

Sony KV-AW21M81 Le manuel du propriétaire

Ce manuel convient également à

Sony KV-AW21M81 Le manuel du propriétaire

dans d''autres langues

Documents connexes

Autres documents