HAEGER TW-70W.008A Manuel utilisateur

Towel Warmer – Toalheiro Elétrico

Secatoallas electrico – Sèche-serviettes électrique

Ηλεκτρικός θερμαντήρας πετσετών

This product is only suitable for well insulated spaces or occasional use.

Este produto é adequado apenas para espaços bem isolados ou utilização ocasional.

Este producto está indicado únicamente en lugares abrigados o para una utilización puntual.

Ce produit ne peut être utilisé que dans des locaux bien isolés ou de manière occasionnelle.

Αυτό το προϊόν είναι κατάλληλο μόνο για καλά μονωμένους χώρους ή περιστασιακή χρήση.

Download

Multi-language file

Instruction Manual / Manual de Instruções / Manual de Instrucciones

Mode d’emploi / Οδηγίες χρήστη

Full Warm

TW-70W.008A (white)

Figure-1

1

2

3

4

5

6

7

Figure-2

English - 1

English

Dear customer

Thank you for having chosen a HÆGER product.

The HÆGER products have been produced to think about the welfare of the consumer

privileging the most raised standards of quality, functionality and assign. We are sure you

will be happy with this appliance.

We assume that the user is familiar with the common procedures of handling household

appliances.

Before using the appliance for the first time please read carefully and thoroughly through

these operating instructions and the safety advice, completely familiarising yourself with

the appliance. Retain these instructions for future reference and pass them on to whoever

might acquire the appliance at a future date.

Intended use

This appliance is only intended for drying fabrics that have been washed in water and

exclusively for non-commercial use.

The device is not designed for commercial use. Generally recognized accident prevention

regulations and the enclosed safety instructions must be observed.

Only carry out activities that are described in these instructions for use. Any other use is

unauthorized misuse. The manufacturer is not liable for any damage resulting from this.

Important Safety Instructions

Please keep this instruction manual in a safe place, along with the warranty card,

purchase receipt and carton for future reference. The safety precautions

enclosed here in reduce the risk of fire, electric shock and injury when correctly

adhered to.

• The device may only be used if it is in perfect working order. If the device or a

part of it is defective, it must be taken out of service and disposed of

properly.

• Do not use the device in areas where there is a risk of explosion or in the vicinity

of flammable liquids or gases!

• Do not use any devices on which the on/off switch does not work properly.

• Keep children away from the device! Keep the device safe from children and

unauthorized persons.

• Do not overload the device. Only use the device for the purposes for which it

is intended.

• Make sure that children do not play with the device.

English - 2

• Always observe the valid national and international safety, health and work

regulations.

• The device may only be connected to a socket with a properly installed

protective contact.

• Before connecting the device, it must be ensured that the mains connection

corresponds to the connection data of the device.

• The input voltage of this product is 220-240V~, 50-60Hz. Before turning on,

ensure the electrical voltage and frequency of the circuit corresponds to those

indicated on the appliance.

• Protection must be provided with a residual current circuit breaker (FI switch)

with a rated residual current of no more than 30 mA.

• Do not touch the mains plug with wet hands!

• Always pull the mains plug by the plug, not the cable.

• Do not kink, crush, pull or run over the mains cable; protect from sharp edges,

oil and heat.

• Do not lift the device by the cable or otherwise misuse the cable.

• Check the plug and cable before each use.

• If the mains cable is damaged, pull out the mains plug immediately. Never use

the device with a damaged power cord.

• The mains plug must always be pulled out when not in use.

• Before plugging in the mains plug, make sure that the device is switched off.

• Always switch off the device before pulling out the mains plug.

• De-energize the device during transport.

• If the power cord of this device is damaged, it must be replaced by the

manufacturer or its customer service or a similarly qualified person in order to

avoid hazards.

• Watch out for cables and gas and water lines when drilling in walls, ceilings or

floors.

• The environment must be free of highly flammable or explosive substances.

• The device must not be operated outdoors.

• The heater must not be placed directly below a wall socket.

• Do not use any adapters or extension cords.

• Close supervision is necessary when any appliance is used by or near

children. Children should be supervised to ensure that they do not play

with the appliance.

English - 3

• This appliance shall not be used by children from 0 year to 8 years. This

appliance can be used by children aged from 8 years and above and

persons with reduced physical, sensory or mental capabilities or lack

of experience and knowledge if they have been given supervision or

instruction concerning use of the appliance in a safe way and

understand the hazards involved. Children shall not play with the

appliance. Keep the appliance and its cord out of reach of children aged

less than 8 years.

• Cleaning and user maintenance shall not be made by children unless

older than 8 and supervised.

• Children of less than 3 years should be kept away unless continuously

supervised.

• Children aged from 3 years and less than 8 years shall only switch

on/off the appliance provided that it has been placed or installed in its

intended normal operating position and they have been given

supervision or instruction concerning use of the appliance in a safe way

and understand the hazards involved. Children aged from 3 years and

less than 8 years shall not plug in, regulate and clean the appliance or

perform user maintenance.

• CAUTION — Some parts of this product can become very hot and cause

burns. Particular attention has to be given where children and

vulnerable people are present.

Caution!

This electric towel rail has been pre-filled with a precise amount of special

water + antifreeze. Repairs that require opening the container should

only be carried out by the manufacturer or its service agent, who must be

contacted in the event of a leak.

English - 4

Description of the elements (Fig-1)

1 – Towel rail 1200*500

2 – 2x screw G1/2

3 – 1x G1/2

4 – Heater element

5 – 4x Cap ɸ 29x9xSR26.6

6 – 4x M8x30 screw

7 – 4x Bracket head ɸ 29x18

8 – 4x Plastic bracket ɸ29x52.5

9 – 4x ST4.8x60mm screw

10 – 4x washer Ø16xØ6x1.4

11 – 4x Bracket 60x ɸ 28x ɸ 20.4

12 – 4x Ø8x64mm wall plug

13 – ST3.8x8 fixing screw

Installation

1. Installation must be carried out by a qualified professional or another fully qualified

person. It must be installed in accordance with the normal trade practices and in

compliance with the national legislation (EU electricity directives and regulations

concerning special installations and places of operation including bathrooms, shower

cabins (IEC 60364-7-701).

2. Make sure you have the necessary equipment for your personal protection before

starting the installation.

3. Check that you have prepared all the components indicated in the accessories box and

that the size and finish are what you need, before starting the installation.

4. The improper installation, handling or use of the towel warmer will be an immediate

reason for the termination of the warranty offered for the product.

5. The product can be safety installed in Zones 3. For installations in Zones 2 (check the

scheme below), please consider the following limitations:

• In bathrooms, the product must never be installed in such a way that the control

panel may be touched by someone in the bathtub or having a shower. The control

panel should be located at least 600 mm distance from any wet areas. The body of

the product can be placed in Zones 2 if the control panel is located inside Zone 3.

• In wet premises the power source must be installed at a height of at least 25 cm

above the floor (bathrooms and kitchens).

• The product must be earthed.

English - 5

IMPORTANT - This product must never be installed with its control panel at the

top. This product must not be installed horizontally. During installation, use

wedges so that the control panel will not be in contact with the floor.

Wall Mounting

DANGER! Danger to life! When drilling, keep a sufficient distance from power lines

that are close to the holes to be drilled.

There is a high risk of fire or life-threatening electric shock.

ATTENTION! Damage to property! When drilling, keep a sufficient distance from

water pipes that are close to the holes to be drilled. There is a risk of water damage.

1. Choose the right part of the wall.

2. Before installing the warmer, mark the places where you want to attach the wall

brackets to the wall and drill the holes in the wall with a suitable drill. (Fig-2, p1-p2)

3. Insert the wall plugs (12) in the holes made and screw the plastic fastener (11) to the

wall with the washer (10) and 4.8 x 60 mm screw (9). (Fig-2, p3)

4. Screw the two brackets (8) and (7) for supporting the horizontal tube of the product

and place the cap (5) (Fig-2, 4-5).

5. Insert the assembled part into the plastic fastener (11) and fix well with the M8x30

screw (6). (Fig2, 6-7)

English - 6

Operation

Check before switching on!

DANGER! Risk of injury! The device may only be put into operation if no errors are

found during the check. If a part is defective, it must be replaced before the next use.

Check the safe condition of the device:

− Check if there are any visible defects.

− Check whether all parts of the device are securely mounted.

Electrical connection

Connect the mains cable to the wall socket. The cable is equipped with an ON/OFF switch.

When the switch is turned ON the button is lit.

LCD Display Diagram

Keys description:

ON / STANDBY key

MENU Function

Temperature and time setting

Icons

Description

Scheduled mode: Customizable daily and weekly heating time.

Free mode: The temperature can be freely selected.

The adjustable range is 30℃～70℃.

Timing mode: The temperature is fixed at 65℃.

Drying time can be adjustable in the range of 30 minutes to 8 hours.

Constant temperature mode: The temperature is fixed at 50℃ and

cannot be adjusted.

Window opening function: When the window opening time is different

from 0 the icon is lit when a window open is detected. [0] means that

the open window detection is switched off.

English - 7

Warming up: When the icon is lit the towel rail is heating.

Keypad lock: Unable to operate any keys (except ON/OFF key).

Clock/Temperature: Shows the current time and temperature.

Circular timeline: The time can be adjusted in the range 0~23H.

Operation instructions

Keys

Description

Display

Boot up:

Briefly press the power key to turn the product on. To

turn off and enter in “STANDBY” mode briefly press the

same key.

In “STANDBY” mode the display shows only the time, all

operations modes are suspended keeping the device

powered with low energy consumption (less than 0.5W

as required by Ecodesign regulation). In this mode

pressing any keys other than power key, the controller

will not react.

Setting the Time and Week:

When switching on for the first time or when switching

on after a long period of inactivity (or after a power

failure), the preset time and week must be reset.

[MENU]

Time setting

To set the Time, long press the [MENU] key for 3s until

the time setting flashes. Press [] and [] to set the

time, if you do not press any button for 30s, the setting

will jump to the minute display.

After setting the time, press the [MENU] key until the

minute display [00] flashes, then press [] and [] to

adjust the minutes. If you do not press a button for 30s,

the setting jumps to the week display.

Note: Long press the [] or [] key for 1s can acelerate

the function.

English - 8

Week setting:

Briefly press the [MENU] key until the week setting [1]

flashes, then press [] and [] to select the day of the

week.

1=Monday, 2=Tuesday, 3=Wednesday, 4=Thursday,

5=Friday, 6=Saturday, 7=Sunday.

Once completed, short press [MENU] to enter weekly

program setting.

Note: If you do not press any key within 30s, the

controller will exit week setting and enters weekly

program setting.

[MENU]

Weekly program setting:

Briefly press the [MENU] key until the [P1] is displayed.

Press [] and [] to select the mode (P1–P7).

(P1: Monday / P2: Tuesday / P3: Wednesday / P4:

Thursday / P5: Friday / P6: Saturday / P7: Sunday).

Once the week mode has been selected, press briefly

[MENU] key to enter the programming of daily hours.

Press [MENU] key for 3 seconds, the time [00:00] flashes

on the screen. Press [] to select the heating activate

mode or [] to select the deactivate mode. Once

selected the controller moves to next hour in a loop until

reach 23H.

Timeline shows Indicates that the current period is

heating, timeline shows (blank) indicates that the

current period is not heating.

After setting Monday, short press [MENU] to enter

Tuesday, until Sunday.

The following example defaults the setting from Monday

to Sunday.

Monday to Sunday: Heating status from 5:00- 23:59.

(Other times are not in the heating state)

After setting weekly program, short press [MENU] to

enter running state.

Note: If no operation within 30s the controller will exit

day program and enters running state.

English - 9

Running state:

Running state will show the setting time, the timing

mode shows controller is in the weekly program. When

the current time is in working state, will be on for 3

seconds and off for 1 second; When not working, will

be off for 3 seconds and on for 1 second. If the product is

in working state, the heating icon lights up.

For example: the current time is 05:08, shown as green

arrow, on for 3 seconds and off for 1 second.

Free mode

This is the default mode when the product is booted up

for the first time and if the scheduled mode is not

programmed. The temperature can be increased or

decreased by 1℃ by short pressing [] or [] key. Long

press for 1s can acelerate the function. The temperature

range is from 30℃ to 70℃.

In the Free mode, if you press [MENU] key, the controller

will be switched to Timing mode.

[MENU]

Timing mode

The heating temperature is fixed in 65℃, the heating

time can be adjusted from 30 minutes to 8 hours. Short

press [] or [] to increase or decrease the time by

increments of 30 minutes. Long press for 1s can acelerate

the function.

In the Timing mode, if you press [MENU] key, the

controller will be switched to Constant temperature

mode.

[MENU]

Constant temperature mode

The heating temperature is fixed in 50℃. The

temperature cannot be changed in this mode.

In the constant temperature mode, if you press [MENU]

key, the controller will be switched to Schedule mode.

English - 10

Keypad lock:

The keypad lock can be activated to lock the currently set

mode to avoid incorrect operation. Press [] and []

simultaneously for 3s until the keypad lock icon [ ]

lights up, the current setting mode is locked; Pressing the

power icon [ ] overrides this command, any other

operation attempts will not be accepted. To deactivate

the keypad lock, press [] and [] simultaneously for 3s

until the icon [ ] stops flashing.

Internal settings and descriptions:

Long press the [] key for about 10s to enter internal

settings, then short press [MENU] to switch mode, press

[] and [] to set your settings. Temperature

Compensation (F0); Open Windows Detection (F1).

Setting the temperature compensation (F0)

The temperature compensation means you can manually

adjust the temperature if the device is not able to detect

the temperature correctly.

In STANDBY mode long press [] for 10s.

Press [MENU] to select F0 and then press [] to enter

temperature compensation settings. The temperature

range is from 5°C to -5°C, short press [MENU] to exit the

current setting menu.

Open window detection (F1):

In heating mode, if the ambient temperature drops 5°C

within 5 minutes, the system will detect that a window is

open.

The device will stop heating for the time selected here.

Choose a value between 60 and 90 minutes.

[0] means that the open window detection is switched

off.

English - 11

Restore factory Setting:

The system will restore factory settings automatically

and go into off state when [ ] is pressed for 10s. All

available icons will be lit for 3s before turning off. Then

press to restart the system. The temperature setting

is 30℃ with heating time 2 hours. The default time is

[12:00], the week default is [1] and temperature

compensation in [-2].

The default temperature compensation of [-2℃], can be

adjusted by short pressing [] and [] in the range of

5℃ to -5℃ in 1℃ by one step.

Maintenance and Cleaning

DANGER! Risk of injury! Always pull out the mains plug before working on the

device.

The product does not require any type of maintenance. We recommend that all parts of

the product are kept clean (behind, underneath, upper fins, etc.). Do not use any abrasive

product on the steel main body. Clean it with a damp cloth and a pH neutral soap, and the

control panel with a dry cloth.

Technical Data

TW-70W.008A

Rated voltage

220-240V~

Rated input frequency

50-60Hz

Rated power

700W

Temperature range

0°C ~ 55°C

Set temperature range

30°C ~ 70°C

Time mode

24h

Week mode

Digital display 1~7

Protection class

Class I

System mode

Free / Schedule / Constant temperature / Timing

Dimensions

1200 x 500 mm

Conformity CE

This product has been tested and produced according to all relevant current CE guidelines, such as:

- Electromagnetic compatibility Directive 2014/30/EU,

- Low voltage Directive (LVD) Directive 2014/35/EU,

- RoHS with its amendments Directive EU 2015/863,

and has been constructed in accordance with the latest safety regulations.

The CE mark attests this product with all relevant directives.

English - 12

Disposal – Environment policy

Packing

The packaging material is entirely recyclable and marked with the recycling symbol. Follow

local regulations for scrapping. Keep the packaging materials (plastic bags, polystyrene

parts, etc.) out of reach of children, as they are potentially dangerous.

Disposal

This appliance is marked according to the European directive 2012/19/EU on Waste Electrical and

Electronic Equipment (WEEE).

By ensuring this product is disposed of correctly, you will help prevent potential negative

consequences for the environment and human health, which could otherwise be caused by

inappropriate waste handling of this product.

This symbol on the product, or on the documents accompanying the product, indicates

that this appliance may not be treated as household waste. Instead, it shall be handed

over to the applicable collection point for the recycling of electrical and electronic

equipment.

Disposal must be carried out in accordance with local environmental regulations for waste

disposal. For more detailed information about treatment, recovery and recycling of this product,

please contact your local city office, your household waste disposal service or the shop where you

purchased the product.

Warranty

Warranty Terms and Conditions

1. The product is guaranteed for the period stipulated by the legislation where it is placed on the

market, starting from the date of purchase, against manufacturing defects and/or workmanship.

The lack of conformity manifested in this period is presumed to exist at the date of purchase.

After this period, it is for the customer to prove that the lack of conformity already existed at

the time of delivery.

2. If, during the warranty period, the product is defective in normal use, the buyer should contact

the selling establishment and send the appliance to the place indicated by the seller.

3. The warranty is only valid upon presentation of the invoice proving the purchase and the

completed warranty certificate (indicating the date of purchase, the name of the dealer, the

reference of the model, and it is also recommended to indicate the serial number and lot

number).

4. The importer/seller reserves the right to refuse warranty assistance in the event that such

information has been deleted or altered after the original purchase of the product.

5. The responsibility of the importer/seller includes in particular the costs of repairing and/or

replacing the unit covered by the warranty with the reservation of the right to replace it with an

equivalent product, in cases where it is not possible to repair it.

6. The warranty does not apply to problems that are not directly related to defects in material,

design or workmanship.

7. This product is an appliance and is intended for home use only. The warranty will be void if the

product is used for professional purposes.

8. The warranty does not cover damage caused by misuse, improper installation, spillage, external

factors, or intentional damage.

English - 13

9. The warranty does not cover damage resulting from falls, use of excessive force, blows, exposure

to extreme environmental conditions or deterioration caused by the normal use of plastic parts

or keyboards, as well as the use of batteries other than those specified in this manual.

10. The warranty does not cover installation and programming by the dealer. In particular, no claim

for installation and free programming by the reseller may be accepted.

11. The warranty does not cover deficiencies that insignificantly impair the operation of the

appliance. Other costs, such as installation, transportation and travel of the technician are

expressly excluded from the warranty.

12. The applicability of the warranty presupposes that the appliance is sent to the seller or place

indicated by him, complete and in well-protected packaging (if possible, in its original packaging)

and accompanied by its sheet or warranty card duly filled out and proof of purchase.

13. If after verification, it is found that there are no reasons for the claim, or that the product is not

defective, the inherent costs will be imputed to the customer, and the dealer is authorized to

charge those costs to the customer.

14. The warranty will be void when it shows signs that an unauthorized person has attempted to

carry out repairs, modifications or replacement of parts on the appliance.

15. Repairs carried out after the end of the warranty period are subject to costs.

16. This warranty does not affect your legal rights that you may have as a consumer under applicable

national law governing the purchase of products where the product is sold.

17. Warranty Period:

European Union countries - European Directives (EU) 2019/771 and (EU) 2019/770 apply on

certain aspects of contracts for the purchase and sale of movable property and transposed into

the national laws of their countries.

Other countries - national legislation on consumer rights in their country applies. In the case of

no official legislation, the guarantee shall be applied at the discretion of the importer placing the

product on the market or the seller establishment.

Português - 14

Português

Estimado Cliente

Obrigado por ter escolhido um produto HÆGER.

Os produtos HÆGER foram concebidos a pensar no bem-estar do consumidor,

privilegiando os mais elevados padrões de qualidade, funcionalidade e designe. Estamos

certos da sua satisfação pela aquisição deste produto.

Partimos do princípio de que o utilizador possui conhecimentos gerais sobre o

manuseamento com eletrodomésticos.

Antes da primeira utilização, leia cuidadosa e totalmente estas instruções de utilização e

de segurança e familiarize-se com as funções do aparelho. Guarde estas instruções para

referência futura e transmita-as a quem venha a adquirir o aparelho no futuro.

Uso previsto

Este aparelho destina-se apenas à secagem de tecidos que tenham sido lavados em água

e exclusivamente para uso doméstico.

O dispositivo não foi projetado para uso comercial. Devem ser observadas as normas de

prevenção de acidentes geralmente reconhecidas e as instruções de segurança incluídas.

Execute apenas as atividades descritas nestas instruções de uso. Qualquer outro uso é uso

indevido não autorizado. O fabricante não se responsabiliza por quaisquer danos daí

resultantes.

Conselhos e advertências de segurança

Por favor mantenha este manual de instruções em lugar seguro, tal como a

garantia preenchida e talão de venda para efeitos de garantia. As mediadas de

segurança incluídas aqui reduzem risco de fogo, choque elétrico e acidentes

pessoais quando corretamente ligado.

• O aparelho só pode ser utilizado se estiver em perfeito estado de

funcionamento. Se o dispositivo ou uma parte dele estiver com defeito, ele

deve ser retirado de serviço e descartado adequadamente.

• Não utilize o aparelho em áreas com risco de explosão ou na proximidade de

líquidos ou gases inflamáveis!

• Não use nenhum dispositivo em que o botão liga/desliga não funcione

corretamente.

• Mantenha as crianças afastadas do aparelho! Mantenha o dispositivo

protegido contra crianças e pessoas não autorizadas.

• Não sobrecarregue o aparelho. Utilize o aparelho apenas para os fins a que se

destina.

• Certifique-se de que as crianças não brinquem com o aparelho.

• Sempre observe os regulamentos nacionais e internacionais de segurança,

saúde e trabalho válidos.

Português - 15

• O aparelho só pode ser ligado a uma tomada com contacto de proteção

devidamente instalado.

• Antes de conectar o dispositivo, deve-se assegurar que a conexão de rede

corresponda aos dados de conexão do dispositivo.

• A tensão de entrada deste produto é 220-240V~, 50-60Hz. Antes de ligar,

certifique-se de que a tensão elétrica e a frequência do circuito correspondem

às indicadas no aparelho.

• A proteção deve ser fornecida com um disjuntor de corrente residual (chave

FI) com corrente residual nominal não superior a 30 mA.

• Não toque na ficha de rede com as mãos molhadas!

• Puxe sempre a ficha de rede pela ficha e não pelo cabo.

• Não dobre, esmague, puxe ou passe por cima do cabo de alimentação;

proteger de arestas afiadas, óleo e calor.

• Não levante o dispositivo pelo cabo ou faça mau uso do cabo.

• Verifique a ficha e o cabo antes de cada uso.

• Se o cabo de alimentação estiver danificado, retire imediatamente a ficha de

alimentação. Nunca use o dispositivo com um cabo de alimentação

danificado.

• A ficha de rede deve ser sempre retirada quando não estiver a ser utilizada.

• Antes de ligar a ficha de rede, certifique-se de que o aparelho está desligado.

• Desligue sempre o aparelho antes de retirar a ficha de rede.

• Desenergize o dispositivo durante o transporte.

• Se o cabo de alimentação deste dispositivo estiver danificado, ele deve ser

substituído pelo fabricante ou seu serviço ao cliente ou por uma pessoa

qualificada para evitar riscos.

• Cuidado com cabos e linhas de gás e água ao perfurar paredes, tetos ou pisos.

• O ambiente deve estar livre de substâncias altamente inflamáveis ou

explosivas.

• O aparelho não deve ser operado ao ar livre.

• O aquecedor de toalhas não deve ser colocado diretamente abaixo de uma

tomada de parede.

• Não use adaptadores ou cabos de extensão.

• É necessária supervisão cuidadosa quando qualquer aparelho for

usado por ou perto de crianças. As crianças devem ser supervisionadas

para garantir que não brinquem com o aparelho.

• Este aparelho não deve ser utilizado por crianças com idades

compreendidas entre os 0 e os 8 anos. Este aparelho pode ser utilizado

por crianças com mais de 8 anos e por pessoas com capacidades físicas,

sensoriais ou mentais reduzidas, assim como com falta de experiência

Português - 16

e conhecimentos, caso sejam supervisionadas ou instruídas sobre

como utilizar o aparelho de modo seguro e compreendam os riscos

envolvidos. As crianças não devem brincar com o aparelho. Mantenha

o aparelho e respetivo cabo fora do alcance de crianças com idade

inferior a 8 anos.

• A limpeza e manutenção não devem ser realizadas por crianças a não

ser que tenham mais de 8 anos e sejam supervisionadas.

• Crianças com menos de 3 anos devem ser mantidas afastadas, a menos

que sejam supervisionadas continuamente.

• As crianças com menos de 3 anos e menos de 8 anos só podem ligar /

desligar o aparelho desde que este tenha sido colocado ou instalado

na sua posição normal de funcionamento e tenham recebido

supervisão ou instruções relativas à utilização segura do aparelho e

compreender os perigos envolvidos. Crianças com idade entre 3 anos

e menos de 8 anos não devem ligar, regular e limpar o aparelho ou

realizar a manutenção do usuário.

• CUIDADO - Algumas partes deste produto podem ficar muito quentes

e causar queimaduras. Atenção especial deve ser dada quando

crianças e pessoas vulneráveis estiverem presentes.

Cuidado!

Este toalheiro elétrico foi pré-preenchido com uma quantidade precisa de água

especial + anticongelante. As reparações que exijam a abertura do recipiente só

devem ser efetuadas pelo fabricante ou pelo seu agente de assistência, que deve

ser contactado em caso de fuga.

Português - 17

Descrição dos elementos (Fig-1)

1 – Toalheiro 1200*500

2 - 2x válvula G1/2

3 - 1x válvula G1/2

4 - Elemento de aquecimento

5 – 4x tampa ɸ 29x9xSR26.6

6 – 4x parafusos M8x30

7 – 4x Cabeça de suporte ɸ 29x18

8 – 4x suporte de plástico ɸ29x52,5

9 – 4x parafusos ST4.8x60mm

10 – 4x arruela Ø16xØ6x1,4

11 – 4x suporte 60x ɸ 28x ɸ 20,4

12 – 4x bucha de parede Ø8x64mm

13 – Parafuso de fixação ST3.8x8

Instalação

1. A instalação deve ser realizada por um profissional qualificado ou outra pessoa

totalmente qualificada. Deve ser instalado de acordo com as práticas comerciais

normais e em conformidade com a legislação nacional (diretivas de eletricidade da

UE e regulamentos relativos a instalações especiais e locais de operação, incluindo

banheiros, cabines de chuveiro (IEC 60364-7-701).

2. Certifique-se de que possui os equipamentos necessários para sua proteção pessoal

antes de iniciar a instalação.

3. Verifique se preparou todos os componentes indicados na caixa de acessórios e se o

tamanho e acabamento são os que você precisa, antes de iniciar a instalação.

4. A instalação, manuseio ou uso inadequado do aquecedor de toalhas será motivo

imediato para o término da garantia oferecida para o produto.

5. O produto pode ser instalado com segurança nas Zonas 3. Para instalações nas Zonas

2 (verifique o esquema abaixo), considere as seguintes limitações:

• Em banheiros, o produto nunca deve ser instalado de forma que o painel de

controle possa ser tocado por alguém na banheira ou no chuveiro. O painel de

controle deve estar localizado a pelo menos 600 mm de distância de qualquer

área molhada. O corpo do produto pode ser colocado nas Zonas 2 se o painel de

controle estiver localizado na Zona 3.

• Em locais húmidos, a fonte de alimentação deve ser instalada a uma altura de

pelo menos 25 cm acima do piso (banheiros e cozinhas).

• O produto deve ser aterrado.

La page charge ...

HAEGER TW-70W.008A Manuel utilisateur

HAEGER TW-70W.008A Manuel utilisateur

dans d''autres langues

Documents connexes

Autres documents