Whirlpool EV161NZTQ01 Le manuel du propriétaire

Marque: Whirlpool

Modèle: EV161NZTQ01

Catégorie: Congélateurs

Taper: Le manuel du propriétaire

UPRIGHTFREEZER

For questions about features, operation/performance,

parts or service, call: f-800-253-1301.

In Canada, call for assistance f-800-807-6777,

or visit our website at...

www.whirlpool.com or www.whirlpool.com/canada

CONGELATEUR

VERTICAL

Au Canada, pour assistance, composez le 1-800-929-6631.

ou visitez notre site web h

www.whirlpool.com/canada

Table of Contents/Table des mati_res .................. 2

1-82515-001/8210432

TABLEOFCONTENTS

FREEZER SAFETY ......................................................................... 3

Proper Disposal of Your Old Freezer or Refrigerator .................. 3

INSTALLATION INSTRUCTIONS .................................................. 4

Unpacking .................................................................................... 4

Location Requirements ................................................................ 4

Electrical Requirements ............................................................... 4

Water Supply Requirements ........................................................ 4

Water Supply Connection ............................................................ 5

Freezer Door ................................................................................. 6

Adjust the Door ............................................................................ 8

FREEZER USE ................................................................................ 8

Ensuring Proper Air Circulation .................................................... 8

Using the Control ......................................................................... 8

Key Eject Lock ............................................................................. 9

Ice Maker ...................................................................................... 9

FREEZER FEATURES .................................................................. 10

Refrigerated Shelves .................................................................. 10

Door Bin...................................................................................... 10

Storage Basket ........................................................................... 10

Storage Gate .............................................................................. 10

FREEZER CARE ........................................................................... 11

Cleaning Your Frost-Free Freezer.............................................. 11

Base Grille .................................................................................. 11

Defrosting and Cleaning Your Manual Defrost Freezer ............. 11

Changing the Light Bulb ............................................................ 12

Power Interruptions .................................................................... 12

Moving Care ............................................................................... 12

TROUBLESHOOTING .................................................................. 13

ASSISTANCE OR SERVICE ......................................................... 14

FREEZER WARRANTY ................................................................ 15

TABLEDESMATIERES

SI_CURITI:t DU CONGI_LATEUR .................................................. 17

Mise au rebut appropriee de votre vieux

congelateur ou refrig6rateur ....................................................... 17

INSTRUCTIONS D'INSTALLATION ............................................. 18

Deballage .................................................................................... 18

Emplacement d'installation ........................................................ 18

Specifications electriques .......................................................... 19

Specifications de I'alimentation en eau ..................................... 19

Raccordement de la canalisation d'eau .................................... 19

Portes du cong_lateur ................................................................ 20

Ajustement de porte ................................................................... 23

UTILISATION DU CONGELATEUR ............................................. 23

Pour s'assurer d'une circulation d'air appropriee ...................... 23

Utilisation de la commande ........................................................ 23

Serrure h cle s_paree ................................................................. 24

Machine h gla9ons ..................................................................... 24

CARACTI_RISTIOUES DU CONGI_LATEUR ............................... 25

Clayettes de refrigeration ........................................................... 25

Balconnet de porte ..................................................................... 25

Panier coulissant ........................................................................ 25

Barriere d'entreposage ............................................................... 25

ENTRETIEN DU CONGI:!:LATEUR ............................................... 26

Nettoyage du congelateur sans givre ........................................ 26

Grille de la base .......................................................................... 26

Degivrage et nettoyage du congelateur

h degivrage manuel .................................................................... 26

Remplacement de I'ampoule d'eclairage .................................. 27

Pannes de courant electrique .................................................... 28

D6m_nagement .......................................................................... 28

DI_PANNAGE ................................................................................. 28

ASSISTANCE OU SERVICE ......................................................... 30

GARANTIE DU CONGI:!:LATEUR ................................................. 31

FREEZERSAFETY

Your safety and the safety of others are very important.

We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety

messages.

This is the safety alert symbol.

This symbol alerts you to potential hazards that can kill or hurt you and others.

All safety messages will follow the safety alert symbol and either the word "DANGER" or "WARNING."

These words mean:

You can be killed or seriously injured if you don't immediately

follow instructions.

You can be killed or seriously injured if you don't follow

instructions.

All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what can

happen if the instructions are not followed.

IMPORTANT SAFETY INSTRUCTIONS

WARNING:To reduce the risk of fire, electric shock, or injury when using your freezer, follow these basic precautions:

• Plug into a grounded 3 prong outlet.

• Do not remove ground prong.

• Do not use an adapter.

• Do not use an extension cord.

• Disconnect power before servicing.

• Replace all parts and panels before operating.

• Use nonflammable cleaner.

• Keep flammable materials and vapors, such as gasoline,

away from freezer.

• Use two or more people to move and install freezer.

• Keep key away from children.

[] Remove doors or lid from your old freezer or refrigerator.

• Disconnect power before installing ice maker (on ice maker

kit ready models only).

SAVETHESEINSTRUCTIONS

Proper Disposal of

Your Old Freezer or Refrigerator

Suffocation Hazard

Remove doors or lid from your old freezer or

refrigerator,

Failure to do so can result in death or brain damage.

IMPORTANT: Child entrapment and suffocation are not problems

of the past. Junked or abandoned freezers or refrigerators are still

dangerous.., even if they will sit for "just a few days." Ifyou are

getting rid of your old refrigerator or freezer, please follow these

instructions to help prevent accidents.

Before You Throw Away Your Old Freezer or Refrigerator:

• Take off the doors or lid.

• Leave the shelves in place so that children may not easily

climb inside.

INSTALLATIONINSTRUCTIONS

Excessive Weight Hazard

Use two or more people to move and install freezer.

Failure to do so can result in back or other injury.

Remove Packaging Materials

• Remove tape and glue residue from surfaces before turning

on the freezer. Rub a small amount of liquid dish soap over

the adhesive with your fingers. Wipe with warm water and

dry.

Do not use sharp instruments, rubbing alcohol, flammable

fluids, or abrasive cleaners to remove tape or glue. These

products can damage the surface of your freezer. For more

information, see "Freezer Safety."

NOTE: This freezer may be installed side by side with another

refrigerator or freezer. Allow for a 3" (7.5 cm) clearance at the top

and sides and a 1/4"(0.64 cm) clearance between the appliances.

When Moving Your Freezer:

Your freezer is heavy. When moving the freezer for

cleaning or service, be sure to protect the floor. Always pull

the freezer straight out when moving it. Do not wiggle or

"walk" the freezer when trying to move it, as floor damage

could occur.

Clean Before Using

After you remove all of the packaging materials, clean the inside

of your freezer before using it. See the cleaning instructions in

"Freezer Care."

Explosion Hazard

Keep flammable materials and vapors, such as

gasoline, away from freezer,

Failure to do so can result in death, explosion, or fire.

IMPORTANT: Do not install the freezer near an oven, radiator, or

other heat source, nor in a location where the temperature will fall

below 40°F (5°C).

Check the strength of the floor before installing your freezer. It

should hold the weight of a freezer fully loaded with food.

Allow at least 3" (7.5 cm) of air space at the top and on both sides

of the freezer and 1" (2.5 cm) between the back of the freezer and

the wall. If the freezer is to be against a wall, leave extra space on

the hinge side so the door can open wider.

Electrical Shock Hazard

Plug into a grounded 3 prong outlet.

Do not remove ground prong.

Do not use an adapter,

Do not use an extension cord.

Failure to follow these instructions can result in death,

fire, or electrical shock.

Recommended grounding method

A 115 Volt, 60 Hz., AC only 15- or 20-amp fused, grounded

electrical supply is required. It is recommended that a separate

circuit serving only your freezer be provided. Use an outlet that

cannot be turned off by a switch or pull chain. Do not use an

extension cord.

Read all directions carefully before you begin.

IMPORTANT:

• If you turn the freezer on before the water line is connected,

turn the ice maker OFR

• All installations must meet local plumbing code requirements.

• Use plastic tubing and check for leaks. Install plastic tubing

only in areas where temperatures will remain above freezing.

TOOLS NEEDED: Flat-blade screwdriver, 7/16"and 1/2"open-end

wrenches or two adjustable wrenches, 1/4"nut driver and drill bit,

hand drill or electric drill (properly grounded).

NOTE: Your freezer dealer has a kit available with a 1/4"(6.35 mm)

saddle-type shutoff valve, a union, and plastic tubing. Before

purchasing, make sure a saddle-type valve complies with your

local plumbing codes. Do not use a piercing-type or 3_e,,

(4.76 mm) saddle valve which reduces water flow and clogs more

easily.

Water Pressure

A cold water supply with water pressure of between 30 and

120 psi (207-827 kPa) is required to operate the water dispenser

and ice maker. If you have questions about your water pressure,

see "Troubleshooting" or call a licensed, qualified plumber.

Reverse Osmosis Water Supply

If a reverse osmosis water filtration system is connected to your

cold water supply, the water pressure to the system needs to be

a minimum of 40 to 60 psi (276 - 414 kPa).

Ifthe water pressure to the reverse osmosis system is less than

40 to 60 psi (276 - 414 kPa), a booster pump can be inserted into

the small tubing that goes from the cold water line to the reverse

osmosis system.

Ifthe water dispenser is still not dispensing water properly:

• Check to see whether the sediment filter in the reverse

osmosis system is blocked. Replace the filter if necessary.

• Allow the storage tank on the reverse osmosis system to refill

after heavy usage.

Ifyour refrigerator has a water filter cartridge, it may further

reduce the water pressure when used in conjunction with a

reverse osmosis system. Remove the water filter cartridge.

See "Water Filtration System."

Ifyou have questions about your water pressure, refer to

"Troubleshooting" or call a licensed, qualified plumber.

6. Fasten the shutoff valve to the cold water pipe with the pipe

clamp. Be sure the outlet end is solidly in the 1/4"(6.35 mm)

drilled hole in the water pipe and that the washer is under the

pipe clamp. Tighten the packing nut. Tighten the pipe clamp

screws carefully and evenly so washer makes a watertight

seal. Do not overtighten or you may crush the plastic tubing.

7. Slip the compression sleeve and compression nut on the

plastic tubing as shown. Insert the end of the tubing into the

outlet end squarely as far as it will go. Screw compression nut

onto outlet end with adjustable wrench. Do not overtighten.

8. Place the free end of the tubing in a container or sink, and

turn ON the main water supply. Flush the tubing until water is

clear. Turn OFF the shutoff valve on the water pipe. Coil the

plastic tubing.

Connect to Freezer

1. Attach the plastic tube to the valve inlet using a compression

nut and sleeve as shown. Tighten the compression nut. Do

not overtighten. Use the tube clamp on the back of the

freezer to secure the tubing to the freezer as shown. This will

help prevent damage to the tubing when the freezer is

pushed back against the wall.

2. Turn shutoff valve ON. Check for leaks. Tighten any

connections (including connections at the valve) or nuts that

leak.

Connect to Water Line

1. Unplug freezer or disconnect power.

2. Turn OFF main water supply. Turn ON nearest faucet long

enough to clear line of water.

3. Locate a 1/2"to 11/4"(12.7 mm to 3.18 cm) vertical cold water

pipe near the freezer.

IMPORTANT:

• Make sure it is a cold water pipe.

• Horizontal pipe will work, but drill on the top side of the

pipe, not the bottom. This will help keep water away from

the drill and normal sediment from collecting in the valve.

Determine the length of plastic tubing you need. Measure

from the connection on the lower left rear of freezer to the

water pipe. Add 7 ft (2.1 m) to allow for cleaning. Use 1/4"

(6.35 mm) O.D. (outside diameter) plastic tubing. Be sure

both ends of plastic tubing are cut square.

Using a grounded drill, drill a 1/4"(6.35 mm) hole in the cold

water pipe you have selected.

..............A

G ............

A. Cold Water Pipe E.Compression Sleeve

B. Pipe Clamp E Shutoff Valve

C. Copper Tubing G.PackingNut

D. CompressionNut

A. Tube clamp

B. Plastic tubing

C. Compression nut

D. Valve inlet

The ice maker is equipped with a built-in water strainer. If

your water conditions require a second water strainer, install

it in the 1/4"(6.35 mm) water line at either tube connection.

Obtain a water strainer from your nearest appliance dealer.

Electrical Shock Hazard

Plug into a grounded 3 prong outlet.

Do not remove ground prong.

Do not use an adapter.

Do not use an extension cord.

Failure to follow these instructions can result in death,

fire, or electrical shock.

4. Plug freezer into a grounded 3 prong outlet.

TOOLSNEEDED:%8"hex-headsocketwrench,%"hex-head

socketwrench,1/4"hex-headsocketwrench,1/2"hex-headsocket

wrench,3/8"hex-headsocketwrench,#2Phillipsscrewdriver,flat-

bladescrewdriver,%8"open-endwrench,flat2"puttyknife,

IMPORTANT:

• All graphics referenced in the following instructions are

included later in this section after "Final Steps." The graphics

shown are for a right-hand swing door (hinges factory

installed on the right).

• Ifyou only want to remove and replace the door, see the

"Remove Door and Hinges" and "Replace Door and Hinges."

• Before you begin, turn the control OFE and remove food and

adjustable door or utility bins from door.

Remove Door and Hinges

5/16"Hex-Head Hinge Screw

Unplug freezer or disconnect power.

Open freezer door and remove base grille from the bottom

front of the freezer. See Base Grille Graphic 1A.

Close the freezer door and keep it closed until you are ready

to lift it free from the cabinet,

NOTE: Provide additional support for the door while the

hinges are being moved. Do not depend on the door magnets

to hold the door in place while you are working,

4. Remove the parts for the top hinge as shown in Top Hinge

Graphic 1B.

5. Lift the freezer door free from the lower hinge and cabinet and

set aside,

6. Remove 3 hex head hinge screws and bottom hinge

assembly. See Bottom Hinge Graphic 1C,

Reverse Door (optional on some models)

IMPORTANT: If you want to reverse your door so that it opens in

the opposite direction, continue with "Reverse Door (optional)"

instructions. If you are not reversing the door, see "Replace Door

and Hinges."

Cabinet

1. Remove the cabinet hinge hole plugs from the cabinet top

and move them to the opposite side hinge holes as shown in

Graphic 2,

2. Remove the door stop screws from the Bottom Hinge

bracket, See Bottom Hinge Graphic 1C

3. Remove the Hinge Pin Nut and Hinge Pin from the hinge

bracket.

4. Rotate the hinge bracket for installation on the opposite side

of the cabinet. See Graphic 3

5. Reinstall the Hinge Pin Nut and Hinge Pin to the hinge

bracket. Hinge Pin must point "up" when hinge bracket is

installed to the cabinet.

6. Invert the door stop so that the countersunk holes line up

with the screw holes in the hinge assembly. See Graphic 4.

7. Reinstall the door stop screws. See Graphic 3.

8. Reinstall the hinge bracket to the cabinet with the 3 hex head

hinge screws.

Handle

Move the door handle from one side of the door to the other.

Style 1

1. Loosen set screws located on side of handle at each end.

See Graphic 1-1,

2. Remove handle from grommets.

3. Using a 1/4"hex-head socket wrench, remove the grommets

from the door.

4. Position the grommets on the opposite side of the door and

reinstall.

5. Position the handle over grommets on the opposite side of

the freezer door.

6. Ensure grommets are fitted into handle holes,

7. Tighten the upper and lower set screws with hex key

provided, Do not overtighten set screws.

Style 2

1. Slide the handle up and off the clips, See Graphic 1-2.

2. Using a flat-blade screwdriver, remove the screws from the

clips and remove the clips from the door.

3. Position the clips on the opposite side of the freezer door and

reinstall the screws.

4. Position handle over the clips.

5. Apply even pressure and push down to lock in place.

Replace Door and Hinges

NOTE: Graphic may be reversed if door swing is reversed.

1. Replace the parts for the bottom hinge as shown and tighten

screws. See Bottom Hinge Graphic 1C. Replace the freezer

door.

NOTE: Provide additional support for the door while the

hinges are being moved. Do not depend on the door magnets

to hold the door in place while you are working.

2. Assemble the parts of the top hinge as shown in the Top

Hinge Graphic 1B. Do not tighten the screws completely,

3. Line up the door so that the bottom aligns evenly with the

cabinet. Tighten all screws.

Final Steps

1. Check all holes to make sure that hole plugs and screws are

in place. Reinstall top hinge cover. See Top Hinge

Graphic 1B.

2. Replace the base grille. See Base Grille Graphic 1A.

Electrical Shock Hazard

Plug into a grounded 3 prong outlet.

Do not remove ground prong.

Do not use an adapter.

Do not use an extension cord.

Failure to follow these instructions can result in death,

fire, or electrical shock.

3. Plug into a grounded 3 prong outlet.

4. Reset the control. See "Using the Control,"

5. Return all removable door parts to door and food to freezer.

Base Grille

A................._

A Cabinet Hinge Hole Plugs

Top Hinge

........................ A

.............O

A. Top Hinge Cover

B. %" or %" Hex-Head Hinge

Screws (depending on model)

C. Top Hinge

A. Door Stop Screws

B. Door Stop

C. Hinge Pin

D. Hinge Pin Nut

E. 5/,6"Hex-Head Hinge Screws

Left Hand Hinge Right Hand Hinge

Door Stop Door Stop |

C ................................

A. Door Stop Screws

B. Door Stop

C. Hinge Pin

D. Hinge Pin Nut

E. 5/_,,Hex-Head Hinge

Screws

Door Handle

Seal Screw

Style 1

A. Grommet

B. Handle

C. Set Screws

Style 2

A. Clips

B. Handle Screws

C. Handle

Locate the two front leveling legs taped among the packing

materials.

Screw these legs into the front holes on the bottom of the

freezer. The back of the freezer rests on two fixed supports.

Adjust the front legs just enough to lift the cabinet up off of

the floor.

NOTE: Ifyour model is equipped with rollers, the front legs

should be lowered enough to lift the rollers off of the floor to

ensure the freezer does not roll forward when the door is

opened.

Place a leveling tool on top of the freezer first side to side,

then front to back. Turn leg counterclockwise to raise a

corner. Turn leg clockwise to lower a corner.

5. Repeat Step 4 until freezer is level.

6. After freezer is fully loaded with food, recheck with level as in

Step 4.

FREEZERUSE

In order to ensure proper temperature, you need to permit proper

airflow in the freezer. As shown in the illustration, cool air enters

through the freezer wall and moves down. The air then

recirculates through the vent near the bottom.

Do not block any of these vents with food packages. If the vents

are blocked, airflow will be prevented, and temperature and

moisture problems may occur.

IMPORTANT: To prevent odors and drying out of food, wrap or

cover foods tightly.

• 1

Turn the freezer temperature control to 4, This setting is designed

to maintain the temperature at or near 0°F (-17.8°C) under normal

operating conditions.

Allow the freezer to cool 6 to 8 hours before filling with frozen

food. Let the freezer cool overnight before adding large amounts

of unfrozen food. Never add more than 2 to 3 Ibs (907 to 1,350 g)

of unfrozen food per cubic foot (28.32 L) of freezer space.

NOTE: When the freezer is first started, the compressor will run

constantly until the freezer is cooled. It may take up to 6 or

8 hours (or longer), depending on room temperature and the

number of times the freezer door is opened. After the freezer is

cooled, the compressor will turn on and off as needed to keep

the freezer at the proper temperature.

The outside of your freezer may feel warm. This is normal. The

freezer's design and main function is to remove heat from

packages and air space inside the freezer. The heat is transferred

to the room air, making the outside of the freezer feel warm.

Adjusting Control

• Turn control to a higher number for colder temperatures.

• Turn control to a lower number for less cold temperatures,

NOTE: The small snowflake icon represents the number I or

the least cold setting. The large snowflake icon represents 6

or the coldest setting,

Fast Freeze (on some models)

This setting causes the freezer to run continuously, driving the

freezer temperature to the coldest possible temperature. To

activate, adjust the control knob to the igloo icon, which

represents the fast freeze setting. Use this feature just before

adding large amounts of unfrozen foods. For best food quality, do

not exceed 3 Ibs (1,350 g) per cubic foot (28.32 L). Return to your

normal setting after 24 to 48 hours.

Temperature Alarm (on some models)

The temperature monitor alarm is located to the left of the

temperature control and sounds an audible alarm if the

temperature reaches 10°F (-12°C) or more above normal for the

selected setting.

The alarm is controlled by a three position switch.

I The proper setting for normal freezer use. The alarm

is on and the amber light will be illuminated.

Prevents the alarm from sounding when the freezer

is warm, such as during start-up or defrosting.

Tests the alarm regardless of temperature.

To lock or unlock the freezer, you must hold the key in the lock

while turning. The lock is spring loaded, so the key cannot be left

in the lock.

To Turn the Ice Maker On/Off

NOTE: Do not force the wire shutoff arm up or down.

• Toturn the ice maker on, simply lower the wire shutoff arm.

NOTE: Your ice maker has an automatic shutoff. As ice is

made, the ice cubes fill the ice storage bin and the ice cubes

will raise the wire shutoff arm to the OFF (arm up) position.

• To manually turn the ice maker off, lift the wire shutoff arm to

the OFF (arm up) position and listen for the click to make sure

the ice maker will not continue to operate.

Ice Production Rate

The ice maker should produce approximately 7 to 9 batches of

ice in a 24-hour period. If ice is not being made fast enough, turn

the Temperature Control toward a higher (colder) number in half

number steps. (For example, if the control is at 3, move it to

between 3 and 4.) Wait 24 hours and, if necessary, gradually turn

the Temperature Control to the highest setting, waiting 24 hours

between each increase.

Remember

• Allow 24 hours to produce the first batch of ice. Discard the

first three batches of ice produced.

The quality of your ice will be only as good as the quality of

the water supplied to your ice maker. Avoid connecting the

ice maker to a softened water supply. Water softener

chemicals (such as salt) can damage parts of the ice maker

and lead to poor quality ice. If a softened water supply cannot

be avoided, make sure the water softener is operating

properly and is well maintained.

• Do not store anything on top of the ice maker or in the ice

storage bin.

Ifthe key is lost, contact your dealer for a replacement. Always

give the model and serial number of your freezer when requesting

a replacement key.

FREEZERFEATURES

This manual covers several different models. The freezer you

have purchased may have some or all of the items listed. The

locations of the features may not match those of your model.

Your freezer is equipped with refrigerated interior shelves.

Packages in direct contact with the shelves will have the best

refrigeration. Fresh, unfrozen food packages should be stored

directly on the shelves and not on top of already frozen food

packages.

The slide out basket provides separate storage space for items

that are difficult to store on freezer shelves. To remove the

basket, pull out and lift up.

When placing the food packages in your freezer, please

remember:

• The cabinet shelves have the best freezing capability. The

door shelves and the bottom of the cabinet have a slightly

less cold temperature. Therefore, packages sensitive to

temperature (meat, poultry, etc.) should not be placed on the

door shelves or the freezer bottom.

• Leave some space between the food packages so that cold

air can pass over and around them.

To Lower and Raise the Storage Gate:

1. Lift the top of the gate up slightly, out of the supports. Pull the

gate forward and down.

2. Return the gate to the upright position. Lift the top of the gate

slightly to clear the supports. Lower the gate into the

supports.

To remove and replace the bin:

1. Remove the bin by tipping the front of the bin forward and

sliding out.

2. Replace the bin by sliding it in above the desired support

tilting it back into place.

FREEZERCARE

Explosion Hazard

Use nonflammable cleaner.

Failure to do so can result in death, explosion, or fire.

Frost-free means that you will never have to defrost your freezer.

Frost is removed by air moving and collecting any moisture and

depositing it on the cooling coil. The cooling coil periodically

warms up just enough to melt the frost, and it then flows down to

the drain pan (located behind the base grille) where it is

evaporated.

Complete cleaning should be done at least once a year.

1. Unplug freezer or disconnect power.

2. Remove all frozen food. Wrap frozen food in several layers of

newspaper and cover with a blanket. Food will stay frozen for

several hours. You may also store frozen food in a cooler,

additional refrigerator-freezer, or in a cool area.

3. Wash the inside walls with a solution of mild detergent in

warm water or 2 tbs (26 mg) baking soda to 1 qt (0.95 L)

warm water.

• Do not use abrasive or harsh cleaners such as window

sprays, scouring cleansers, flammable fluids, cleaning

waxes, concentrated detergents, bleaches or cleansers

containing petroleum products on plastic parts, interior

and door liners or gaskets. Do not use paper towels,

scouring pads, or other harsh cleaning tools. These can

scratch or damage materials.

4. Rinse well and wipe dw with a clean soft cloth.

5. Use the appropriate cleaning method for your exterior finish.

Painted metal: Wash exteriors with a clean sponge or soft

cloth and a mild detergent in warm water. Do not use abrasive

or harsh cleaners, or cleaners designed for stainless steel.

Dry thoroughly with a soft cloth. For additional protection

against damage to painted metal exteriors, apply appliance

wax (or auto paste wax) with a clean, soft cloth. Do not wax

plastic parts.

Stainless steel finish: Wash with a clean sponge or soft

cloth and a mild detergent in warm water. Do not use abrasive

or harsh cleaners. DW thoroughly with a soft cloth.

To keep your stainless steel refrigerator looking like new

and to remove minor scuffs or marks, it is suggested that

you use the manufacturer's approved Stainless Steel

Cleaner & Polish.

IMPORTANT: This cleaner is for stainless steel parts only!

Do not allow the Stainless Steel Cleaner & Polish to come

into contact with any plastic parts such as the trim

pieces, dispenser covers or door gaskets. If accidental

contact does occur, clean plastic part with a sponge and

mild detergent in warm water. DW thoroughly with a soft

cloth.

7. Plug in freezer or reconnect power.

8. See "Using the Control."

To Remove and Replace the Base Grille:

1. Open the freezer door and remove the base grille by pulling

down and out from the top.

2. Replace the base grille by putting the clips in the openings in

the refrigerator panel. Push in until the base grille snaps into

place.

Explosion Hazard

Use nonflammable cleaner.

Failure to do so can result in death, explosion, or fire.

Defrost and clean your freezer when frost has built up to about

1/4"(6 mm) thickness. Complete defrosting and cleaning should

be done at least once a year. In high humidity areas, a freezer

may need more frequent defrosting and cleaning.

Do not use abrasive cleaners on your freezer. Do not use cleaning

waxes, concentrated detergents, bleaches, or cleaners

containing petroleum on plastic parts. Damage can occur.

NOTE: The drain cap must be removed before defrosting the

freezer and replaced securely afterward.

1. Unplug freezer or disconnect power.

2. Remove all frozen food. Wrap frozen food in several layers of

newspaper and cover with a blanket. Food will stay frozen for

several hours. You may also store frozen food in a cooler, an

additional refrigerator or freezer, or a cool area.

3. Remove base grille. See "Base Grille."

6. Replace all frozen food.

Style 1-Models with a drain system

Reach under the unit and pull the drain hose out through the

opening. The drain hose carries defrost water out of the

freezer, and through the area behind the base grille. Place a

large shallow pan under the drain hose. Remove the drain

cap inside freezer.

NOTE: Check the drain pan frequently to avoid water

overflow. Have a second pan handy for easier emptying.

Style 2-Models without a drain system

Remove water from the freezer bottom using a sponge or

baster and empty the water into a large pan.

5. Place pans of hot water in freezer with door open to speed

melting. Directing air from an electric fan into freezer will also

help. Do not place fan or any electrical device in freezer.

6. Use a plastic scraper to remove frost.

NOTE: Do not use an ice pick, knife, or other sharp-pointed

tool to defrost freezer. Damage can occur.

7. Wipe water from walls with a towel or sponge.

8. Wash the inside walls with a solution of mild detergent in

warm water or 2tbs (26 mg) baking soda to 1 qt (0.95 L)

warm water. Do not use abrasive or harsh cleaners.

9. Rinse well and wipe dry with a clean soft cloth.

10. Use the appropriate cleaning method for your exterior finish.

Painted metal: Wash exteriors with a clean sponge or soft

cloth and a mild detergent in warm water. Do not use abrasive

or harsh cleaners, or cleaners designed for stainless steel.

Dry thoroughly with a soft cloth. For additional protection

against damage to painted metal exteriors, apply appliance

wax (or auto paste wax) with a clean, soft cloth. Do not wax

plastic parts.

Stainless steel finish: Wash with a clean sponge or soft

cloth and a mild detergent in warm water. Do not use abrasive

or harsh cleaners, or cleaners designed for stainless steel.

Dry thoroughly with a soft cloth.

To keep your Stainless Steel refrigerator looking like new

and to remove minor scuffs or marks, it is suggested that

you use the manufacturer's approved Stainless Steel

Cleaner & Polish.

IMPORTANT: This cleaner is for Stainless Steel parts only!

• Do not allow the Stainless Steel Cleaner & Polish to come

into contact with any plastic parts such as the trim

pieces, dispenser covers or door gaskets. If accidental

contact does occur, clean plastic part with a sponge and

mild detergent in warm water. Dry thoroughly with a soft

cloth. To order the cleaner, see "Accessories."

11. For models with a drain system, you should replace the drain

hose, drain cap and base grille.

12. Replace all frozen food.

13. Plug in freezer or reconnect power.

14. See "Using the Control."

NOTE: Not all appliance bulbs will fit your freezer. Be sure to

replace the bulb with one of the same size, shape, and wattage.

Style 1

1. Unplug freezer or disconnect power.

2. Replace the light bulb with an appliance bulb of the same

wattage.

3. Plug in freezer or reconnect power.

Style 2

1. Unplug freezer or disconnect power.

2. Remove the light shield. From the front of the light shield,

push backward and down.

3. Replace the light bulb with an appliance bulb of the same

wattage.

4. Replace the light shield.

5. Plug in freezer or reconnect power.

If the power will be out for 24 hours or less, keep the door closed

to help food stay cold and frozen.

If the power will be out for more than 24 hours, do one of the

following:

• Remove all frozen food and store it in a frozen food locker.

• If a food locker is not available, consume or can perishable

food at once.

After the power is restored, unplug the freezer for 30 minutes, to

allow the refrigeration system to equalize. During this time keep

the door closed whenever possible.

REMEMBER: A full freezer stays cold longer than a partially filled

one. A freezer full of meat stays cold longer than a freezer full of

baked goods. If you see that food contains ice crystals, it may be

refrozen, although the quality and flavor may be affected. If the

condition of the food is poor, dispose of it.

f. Remove all frozen food.

2. Unplug the freezen

3. Clean it thoroughly.

4. Tape the freezer shut and tape the electrical cord to the

cabinet.

When you get to your new home, refer to the "Installation

Instructions" and "Freezer Use" sections for information on

installation and setting the controls.

TROUBLESHOOTING

Trythe solutions suggested here first to avoid the cost of an unnecessary service call...

Your freezer will not operate

Electrical Shock Hazard

Plug into a grounded 3 prong outlet.

Do not remove ground prong.

Do not use an adapter.

Do not use an extension cord.

Failure to follow these instructions can result in death,

fire, or electrical shock.

is the power supply cord unplugged? Plug into a grounded

3 prong outlet,

Has a household fuse blown or circuit breaker tripped?

Replace the fuse or reset the circuit breaker.

Is the Temperature Control turned to the OFF position?

See "Using the Control."

Is the freezer defrosting (on some models)? Recheck to

see whether the freezer is operating in 30 minutes. Your

freezer will regularly run an automatic defrost cycle.

The lights do not work

Electrical Shock Hazard

Plug into a grounded 3 prong outlet.

Do not remove ground prong.

Do not use an adapter.

Do not use an extension cord.

Failure to follow these instructions can result in death,

fire, or electrical shock.

Is the power supply cord unplugged? Plug into a grounded

3 prong outlet,

Is a light bulb loose in the socket or burned out? See

"Changing the Light Bulb."

There is water in the defrost drain pan (on some models)

• Is the freezer defrosting? The water will evaporate, It is

normal for water to drip into the defrost pan,

• Is it more humid than normal? When it is humid, expect that

the water in the defrost pan will take longer to evaporate,

The motor seems to run too much

• Is there excessive frost or a package preventing the door

from closing? Defrost and clean the freezer, or move the

package so the door closes properly.

Is the room temperature hotter than normal? The motor

will run longer under warm conditions, At normal room

temperatures, your motor will run about 40% to 80% of the

time. Under warmer conditions, it will run even more.

Has a large amount of food just been added to the

freezer? Adding a large amount of food warms the freezer.

The motor normally will run longer to cool the freezer back

down.

is the door opened often? The motor will run longer when

this occurs. Conserve energy by getting all items out at one

time, keeping food organized, and closing the door as soon

as possible.

• Is the control set correctly for the surrounding

conditions? See "Using the Control,"

• is the door or not closed completely? Push the door firmly

shut. If it will not shut all the way, see "The door will not close

completely" later in this section.

• Are the condenser coils dirty (on some models)? This

prevents air transfer and makes the motor work harder, Clean

the condenser coils. See "Freezer Care."

• Is the door gasket sealed all the way around? Contact a

qualified person or a technician.

• Is there enough air circulation space around the freezer?

See "Location Requirements."

NOTE: If the problem is not due to any of the above,

remember that your new freezer will run longer than your old

one due to its high-efficiency motor.

The ice maker is not producing ice or not enough ice

(on some models)

• Has the ice maker just been installed? Wait 72 hours for full

ice production to begin. Once your freezer is cooled, the ice

maker should produce 70-120 cubes every 24 hours.

• Is the freezer temperature cold enough to produce ice?

Wait 24 hours after hookup for ice production. See "Using the

Control."

• Is the wire shutoff arm in the OFF (arm up) position?

Lower the wire shutoff arm to the ON (arm down) position.

See "Ice Maker."

• Is the water line shutoff valve to the freezer turned on?

Turn on the water valve. See "Connect the Water Supply."

• Does the ice maker mold have water in it or has no ice

been produced? Be sure your freezer has been connected to

a water supply and the supply shutoff valve is turned on. See

"Connect the Water Supply."

• Is an ice cube jammed in the ejector arm? Remove the ice

from the ejector arm with a plastic utensil. See "Ice Maker."

• Has a large amount of ice just been removed? Allow

24 hours for ice maker to produce more ice.

• Is the control set correctly? Iftoo little ice is produced, see

"Using the Control."

NOTE: If not due to any of the above, there may be a problem

with the water line. Call for service.

Off-taste, odor or gray color in the ice (on some models)

• Are the plumbing connections new, causing discolored or

off-flavored ice? Discard the first few batches of ice.

• Have the ice cubes been stored tee long? Throw old ice

away and make a new supply.

Explosion Hazard

Use nonflammable cleaner.

Failure to do so can result in death, explosion, or fire.

• Do the freezer and ice bin need to be cleaned? See

"Freezer Care."

• Does the water contain minerals (such as sulfur}? A filter

may need to be installed to remove the minerals.

Temperature is too warm

• Are the air vents blocked? This prevents cold air movement.

Move objects away from the air vents. See "Ensuring Proper

Air Circulation" for air vent locations.

• Is the door opened often? Be aware that the freezer will

warm when this occurs. In order to keep the freezer cool, try

to get everything you need out of the freezer at once, keep

food organized so it is easy to find, and close the door as

soon as the food is removed.

• Has a large amount of food just been added to the

freezer? Adding a large amount of food warms the freezer. It

can take several hours for the freezer to return to the normal

temperature.

• Is the control set correctly for the surrounding

conditions? See "Using the Control."

The door will not close completely or is difficult to open

• Are food packages blocking the door ? Rearrange

containers so that they fit more tightly and take up less

space.

• Are the shelves and basket out of position (on some

models)? Put the shelves and basket back into their correct

positions.

Explosion Hazard

Use nonflammable cleaner.

Failure to do so can result in death, explosion, or fire.

Are the gaskets dirty or sticky? Clean gaskets according to

the directions in "Freezer Care."

Does the freezer wobble or seem unstable? See "Adjust

the Door."

The freezer clicks but does not run

• Has the local power failed? Unplug the freezer for

30 minutes to allow the refrigeration system to equalize.

During this time, keep the door closed whenever possible.

ASSISTANCEORSERVICE

Before calling for assistance or service, please check

"Troubleshooting." It may save you the cost of a service call. If

you still need help, follow the instructions below.

When calling, please know the purchase date and the complete

model and serial number of your appliance. This information will

help us to better respond to your request.

If You Need Replacement Parts

If you need to order replacement parts, we recommend that you

only use factory specified parts. Factory specified parts will fit

right and work right, because they are made with the same

precision used to build every new WHIRLPOOL ®appliance.

To locate factory specified parts in your area, call us or your

nearest designated service center.

Call customer service toll free in the U.S.A. toll free:

f-800-253-1301 Monday to Friday 8:00 a.m. -- 8:00 p.m. (EST).

Saturday 8:00 a.m. -- 4:30 p.m. (EST). In Canada call toll free:

1-800-807-6777 Monday to Friday 8:00 a.m. -- 6:00 p.m.

For Further Assistance

If you need further assistance, you can write to us with any

questions or concernt at:

Whirlpool Brand Customer Service

RO. Box 310

Ottawa, OH 45875-0310

FREEZERWARRANTY

Warrantor: WC Wood Company Inc., 677 Woodland Drive, Ottawa, OH 45875

ONE YEAR LIMITED WARRANTY

For one year from the date of purchase, when this major appliance is operated and maintained according to instructions attached to or

furnished with the product, warrantor will pay for factory specified parts and repair labor to correct defects in materials or workmanship.

Service must be provided by a designated service company.

ITEMS WARRANTOR WILL NOT PAY FOR

1. Service calls to correct the installation of your major appliance, to instruct you how to use your major appliance, to replace or repair

house fuses or to correct house wiring or plumbing.

2. Service calls to repair or replace appliance light bulbs, air filters or water filters. Those consumable parts are excluded from warranty

coverage.

3. Repairs when your major appliance is used for other than normal, single-family household use.

4. Damage resulting from accident, alteration, misuse, abuse, fire, flood, acts of God, improper installation, installation not in

accordance with electrical or plumbing codes, or use of products not approved by warrantor.

5. Any food loss due to refrigerator or freezer product failures.

6. Replacement parts or repair labor costs for units operated outside the United States or Canada.

7. Pickup and delivery. This major appliance is designed to be repaired in the home.

8. Repairs to parts or systems resulting from unauthorized modifications made to the appliance.

9. Expenses for travel and transportation for product service in remote locations.

10. The removal and reinstallation of your appliance if it is installed in an inaccessible location or is not installed in accordance with

published installation instructions.

DISCLAIMER OF IMPLIED WARRANTIES; LIMITATION OF REMEDIES

CUSTOMER'S SOLE AND EXCLUSIVE REMEDY UNDER THIS LIMITED WARRANTY SHALL BE PRODUCT REPAIR AS PROVIDED

HEREIN. IMPLIED WARRANTIES, INCLUDING WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE,

ARE LIMITED TO ONE YEAR OR THE SHORTEST PERIOD ALLOWED BY LAW. WARRANTOR SHALL NOT BE LIABLE FOR

INCIDENTAL OR CONSEQUENTIAL DAMAGES. SOME STATES AND PROVINCES DO NOT ALLOW THE EXCLUSION OR LIMITATION

OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, OR LIMITATIONS ON THE DURATION OF IMPLIED WARRANTIES OF

MERCHANTABILITY OR FITNESS, SO THESE EXCLUSIONS OR LIMITATIONS MAY NOT APPLY TO YOU. THIS WARRANTY GIVES

YOU SPECIFIC LEGAL RIGHTS AND YOU MAY ALSO HAVE OTHER RIGHTS, WHICH VARY FROM STATETO STATE OR PROVINCE

TO PROVINCE.

Outside the 50 United States and Canada, this warranty does not apply. Contact your authorized dealer to determine if another

warranty applies.

Ifyou need service, first see the "Troubleshooting" section of the Use & Care Guide. After checking "Troubleshooting," additional help

can be found by checking the "Assistance or Service" section or by calling 1-800-253-1301 in the U.S.A. In Canada,

call f -800-807-6777. 10/05

Keep this book and your sales slip together for future

reference. You must provide proof of purchase or installation

date for in-warranty service.

Write down the following information about your major appliance

to better help you obtain assistance or service if you ever need it.

You will need to know your complete model number and serial

number. You can find this information on the model and serial

number label located on the product.

Dealer name

Address

Phone number

Model number

Serial number

Purchase date

SECURIT] DUCONGELATEUR

Votre securit6 et celle des autres est tr6s importante.

Nous donnons de nombreux messages de securit6 importants dans ce manuel et sur votre appareil menager. Assurez-vous de

toujours lire tous les messages de s6curite et de vous y conformer.

Voici le symbole d'alerte de securit6.

Ce symbole d'alerte de s_curite vous signale les dangers potentiels de d_ces et de blessures graves &vous

et h d'autres.

Tousles messages de s_curite suivront le symbole d'alerte de securit_ et le mot "DANGER" ou

"AVERTISSEMENT'. Ces roots signifient :

Risque possible de deces ou de blessure grave si vous ne

suivez pas immediatement les instructions.

Risque possible de deces ou de blessure grave si vous

ne suivez pas les instructions.

Tousles messages de securit_ vous diront quel est le danger potentiel et vous disent comment reduire le risque de blessure et

ce qui peut se produire en cas de non-respect des instructions.

IIVIPORTANTES iNSTRUCTiONS DE SECURITI_

AVERTISSEIVIENT :Pour reduire les risques d'incendie, de choc electrique ou des blessures Iors de I'utilisation du

congelateur, prendre quelques precautions fondamentales, y compris les suivantes :

[] Brancher I'appareil sur une prise & 3 alveoles reliee h [] Garder les materiaux et les vapeurs inflammables, telle que

la terre.

[] Ne pas enlever la broche de liaison a la terre.

[] Ne pas utiliser un adaptateur.

[] Ne pas utiliser un c_ble de rallonge.

[] Debrancher la source de courant electrique avant

I'entretien.

[] Replacer pieces et panneaux avant de faire la remise en

marche.

[] Utiliser un produit de nettoyage ininflammable.

I'essence, loin du congelateur.

[] Utiliser deux ou plus de personnes pour deplacer et

installer le congelateur.

[] Garder la cle loin des enfants.

[] Enlever les portes ou le couvercle de votre vieux

congelateur ou refrigerateur.

[] Debrancher la source de courant electrique avant

I'installation de la machine a glagons (seulement pour

modules pr_ts a recevoir une machine a glagons).

CONSERVEZ CES iNSTRUCTiONS

Mise au rebut appropri6e de votre vieux Avant de mettre au rebut votre vieux cong61ateur ou

cong_lateur ou r6frig_rateur r6frig6rateur:

Enlever les portes ou le couvercle.

Laisser les tablettes en place, de sorte que les enfants nepuissent pas facilement se glisser a I'int@ieur.

Risque de suffoquer

Enlever les portes ou le couvercle de votre vieu×

cong61ateur ou refrigerateur.

Le non-respect de cette instruction peut causer

un deces ou des lesions cerebrales.

IMPORTANT : Le probleme des enfants trouves enfermes ou

_touff6s n'est pas nouveau. Les congelateurs ou refrig@ateurs

jetes ou abandonnes presentent des dangers, m_me s'ils sont

abandonnes pendant "quelques jours" seulement. Si vous vous

debarrassez de votre vieux refrigerateur or freezer, veuillez suivre

les instructions suivantes pour aider a eviter les accidents.

INSTRUCTIONSD'INSTALLATION

Risque du poids excessif

Utiliser deux ou plus de personnes pour depiacer et

installer le congelateuro

Le non-respect de cette instruction peut causer

une blessure au dos ou d'autre blessure.

Enlevement des mat_riaux d'emballage

• Enlever le ruban adhesif et [a colle des surfaces du

congelateur avant de le brancher. Frotter une petite quantite

de savon liquide pour la vaisselle sur I'adhesif avec les

doigts. Rincer a I'eau tilde et essuyer.

Ne pas utiliser d'instruments coupants, d'alcool a friction, de

liquides inflammables ou de nettoyants abrasifs pour enlever

le ruban adhesif ou la colle. Ces produits peuvent

endommager la surface de votre congelateur. Pour plus de

renseignements, voir "Securit6 du congelateur".

Deplacement de votre congelateur :

Votre congelateur est Iourd. Lots du deplacement du

congelateur pour le nettoyage ou le service, veiller &

proteger le plancher.

Toujours tirer le congelateur tout droit Iors du deplacement.

Ne pas incliner le congelateur d'un c6te ou de I'autre nile

"faire marcher" en essayant de le d@lacer car le plancher

pourrait 6tre endommage.

Nettoyage avant I'utilisation

Apres avoir enleve tousles materiaux d'emballage, nettoyer

I'interieur du congelateur avant I'utilisation. Voir les instructions

de nettoyage a "Entretien du congelateur".

Risque d'explosion

Garder les materiaux et les vapeurs inflammables, teile

que I'essence, loin du congeiateur.

Le non-respect de cette instruction peut causer

un deces, une explosion ou un incendie.

IMPORTANT : Ne pas installer le congelateur pres d'un four, d'un

radiateur ou d'une autre source de chaleur, ni dans un endroit ou

la temp@ature baissera au-dessous de 40°F (5°C).

Verifier la solidite du plancher avant d'installer le congelateur. Le

plancher dolt supporter le poids d'un congelateur entierement

rempli d'aliments.

Laisser un espace d'au moins 3" (7,5 cm) en haut et des deux

c6tes du congelateur et de 1" (2,5 cm) entre I'arriere du

congelateur et lemur. Si le congelateur dolt _tre contre un mur,

laisser un espace plus grand du c6te des charni@es pour que

la porte puisse s'ouvrir plus.

REMARQUE : Ce congelateur peut _tre installe c6te a c6te avec

un autre refrig@ateur ou congelateur. Permet un degagement de

3" (7,5 cm) sur le dessus et les c6tes et un degagement de

1A"(0,64 cm) entre les appareils.

II I

Risque de choc electrique

Brancher sur une prise a 3 aIveoles reliee a la terre.

Ne pas enlever la broche de liaison a la terre.

Ne pas utiliser un adaptateur.

Ne pas utiliser un c_ble de rallonge.

Le non-respect de ces instructions peut causer

un deces, un incendie ou un choc electrique.

M_thode recommand_e de raise & la terre

Une source de courant electrique de 115 V, 60 Hz, CA seulement,

et prot6g_e par fusible de 15 ou 20 amperes, adequatement raise

la terre est n_cessaire. II est recommande d'utiliser un circuit

distinct pour alimenter uniquement le congelateur. Utiliser une

prise de courant murale qui ne peut pas _tre raise hers circuit

I'aide d'un commutateur ou d'une cha_ne. Ne pas employer un

c&ble de rallonge.

Lire attentivement toutes les instructions avant de commencer.

IMPORTANT:

• Si on dolt utiliser le congelateur avant qu'il soit raccorde a la

canalisation d'eau, placer la commande de la machine &

glagons a la position d'arr_t (OFF).

• Toutes les installations doivent _tre conformes aux exigences

des codes Iocaux de plomberie.

• Utiliser un tube en plastique et verifier s'il y a des fuites.

Installer les tubes en plastique seulement a des endroits ou la

temp@ature se maintient au-dessus du point de congelation.

Outils requis : Un tournevis &lame plate, cles plates de 7/ld' et

I/4, •

1/2"ou deux cles a molette reglables, tourne-ecrou et foret de 1 ,,

perceuse manuelle ou electrique (convenablement reliee a la

terre). •

REMARQUE : Votre marchand de congelateurs presente une

trousse disponible avec un robinet d'arr_t a etrier de 1/4"

(6,35 ram), un raccord et un tube en plastique. Avant I'achat,

s'assurer que le robinet d'arr_t a etrier est conforme a yes codes

Iocaux de plomberie. Ne pas employer de robinet d'arr@ a etrier 4.

de 3Ad'(4,76 ram) ou de type a percer, ce qui reduit le debit d'eau

et cause une obstruction plus facilement.

Pression de I'eau

Une alimentation en eau froide avec une pression entre 30 et

120 Ib/po 2(207 - 827 kPa) est necessaire pour faire fonctionner le

distributeur d'eau et la machine a glagons. Si vous avez des

questions au sujet de la pression de votre eau consulter

"Depannage" ou faire appel & un plombier qualifie agree.

Alimentation en eau par osmose inverse

Si un systeme de purification de I'eau par osmose inverse est

raccorde & votre alimentation en eau froide, la pression de I'eau

au systeme dolt 6tre d'un minimum de 40 a 60 Ib/po 2

(276 - 414 kPa).

Si la pression de I'eau au syst_me d'osmose inverse est

inf@ieure a 40 - 60 Ib/po 2(276 - 414 kPa), une pompe de

surpression peut _tre ins@ee dans le petit tube qui va de la

canalisation d'eau froide au systeme d'osmose inverse.

Si le distributeur d'eau ne distribue toujours pas d'eau au debit

approprie :

• Verifier pour voir si le filtre du systeme d'osmose inverse est

bloque et le remplacer si necessaire.

• Laisser le reservoir du syst_me d'osmose inverse se remplir

apres une utilisation intense.

Si votre refrigerateur a une cartouche de filtre a eau, celle-ci

peut reduire encore plus la pression de I'eau Iorsqu'elle est

utilisee avec un systeme d'osmose inverse. Retirer la

cartouche du filtre a eau. Voir "Systeme de filtration d'eau".

Si vous avez des questions au sujet de la pression de votre eau,

consulter "Depannage" ou appeler un plombier qualifie agree.

Raccordement a une canalisation d'eau :

1. Debrancher le congelateur ou deconnecter la source de

courant electrique.

2. FERMER le robinet principal d'arrivee d'eau. OUVRIR le

robinet de puisage le plus proche pendant une periode

suffisante pour que la canalisation d'eau se vide.

3. Trouver une canalisation d'eau froide verticale de

1/2"a 11/4'' (12,7 mm a 3,18 cm) pros du congelateur.

IMPORTANT :

Assurez-vous qu'il s'agit d'un conduit d'eau froide.

Un conduit horizontal fonctionnera, mais percer par le

dessus de la canalisation et non pas par le dessous.

Ainsi, I'eau ne risquera pas d'arroser la perceuse. Ceci

emp@che egalement les sediments qu'on trouve

normalement dans I'eau de s'accumuler dans le robinet

d'arr_t.

Pour determiner la Iongueur du tube en plastique, il faut

mesurer la distance entre le point de connexion inferieur

gauche a I'arriere du congelateur et le tuyau d'arrivee d'eau.

Ajouter une Iongueur de 7 pi (2,1 m) pour permettre le

deplacement du congelateur pour le nettoyage. Utiliser un

tube en plastique de 1/4"(6,35 mm) de diametre exterieur.

Veiller ace que le tube soit coupe d'equerre aux deux

extremites.

5. /_,I'aide d'une perceuse electrique reliee a la term, percer un

trou de 1/4"dans le tuyau de canalisation d'eau froide choisi.

............ ,_ A

A, Canalisation d'eau froide

B. Bride de tuyau

Or Tube en cuivre

D. E-crou de compression

E.Bague de compression

F. Robinet d'arr_t

G. Ecrou de serrage

6. Fixer le robinet d'arr_t sur la canalisation d'eau froide avec la

bride de tuyau. Verifier que le raccord du robinet est bien

engage darts le trou de 1/4"perce dans la canalisation et que

la rondelle d'etanch6it6 est placee sous la bride de tuyau.

Serrer I'ecrou de serrage sur la tige du robinet. Serrer

soigneusement et uniform_ment les vis fixant la bride de

tuyau sur la tuyauterie afin que la rondelle forme une jonction

etanche. Ne pas serrer excessivement car ceci pourrait

provoquer I'ecrasement du tube en plastique.

7. Enfiler I'_crou et la bague de compression du raccord sur le

tube en plastique comme on le volt sur I'illustration. Inserer

I'extremite du tube aussi loin que possible dans I'ouverture

de sortie du robinet. Visser I'ecrou du raccord de

compression sur le raccord de sortie avec une cle a molette.

Ne pas serrer excessivement.

8. Placer le bout libre du tube dans un contenant ou evier et

OUVRIR le robinet principal d'arrivee d'eau et laisser I'eau

s'ecouler par le tube jusqu'a ce que I'eau soit limpide.

FERMER le robinet principal d'arrivee d'eau. Enrouler le tube

en plastique.

Raccordement au cong_lateur :

1. Connecter le tube en plastique au robinet d'eau en utilisant

un ecrou et une bague de compression tel qu'illustr& Serrer

I'ecrou de compression. Ne pas serrer excessivement.

Utiliser la bride du tube a I'arriere du cong_lateur pour fixer le

tube au congelateur tel qu'illustr& Ceci aidera a emp_cher

les dommages au tube Iorsque le congelateur est pousse

contre lemur.

2. OUVRIR le robinet d'arr_t. Inspecter pour rechercher les

fuites. Serrer tous les raccords (y compris les raccordements

de la valve d'entree d'eau) ou les ecrous qui coulent.

La machine a gla£:ons est equipee d'un filtre & eau incorpor&

Si la qualite de I'eau distribuee Iocalement necessite un

deuxieme filtre a eau, il serait utile de I'installer dans le tube

de raccordement de 1A"(6,35 mm). On peut obtenir un tel

filtre a eau chez le marchand d'appareils electromenagers le

plus proche.

Risque de choc electrique

Brancher sur une prise b 3 alveoles reliee a la terre.

Ne pas enlever la broche de liaison a la terre.

Ne pas utiliser un adaptateuro

Ne pas utiliser un c_ble de rallonge.

Le non-respect de ces instructions peut causer

un deces, un incendie ou un choc electrique.

4. Brancher le congelateur sur une priese & aleveoles reliee a la

terre.

OUTILLAGE NECESSAIRE : Cle a douille a t_te hexagonale de

sad', cle & douille & t_te hexagonale de %", cle a douille &t@e

hexagonale de 1/4",cle & douille & t_te hexagonale de 1/_,,,cle &

douille & t_te hexagonale de %", tournevis Phillips n° 2, tournevis

lame plate, cle plate de sad', couteau a mastic plat de 2".

IMPORTANT :

• Toutes les illustrations mentionnees dans les instructions

suivantes sont incluses plus loin dans cette section apr_s

"12tapes finales". Les illustrations correspondent & une porte

s'ouvrant & droite (charnieres installees & droite a I'usine).

• Si vous desirez seulement enlever et reinstaller les portes,

voir "Demontage - Portes et charni_res" et "Reinstallation -

Portes et charnieres".

• Avant de commencer, tourner la commande a OFF (arr_t), et

retirer les aliments et tout balconnet reglable ou

compartiment utilitaire des portes.

D_montage - Portes et charni_res

A. Bride du tube

Br Tube en plastique

Or ECrOU de compression

D.4. Entreed'eau de la valve

Vis de charniere 9 t_te hexagonale de 5/16"

1. Debrancher le congelateur ou deconnecter la source de

courant electrique.

2. Ouvrir la porte du congelateur et 6ter la grille de la base

situee a I'avant de la partie inf@ieure du congelateur. Voir la

grille de la base sur I'illustration 1A.

3. Fermer la porte du congelateur; maintenir les deux portes

fermees jusqu'au moment ou on est pr_t ales separer de la

caisse de I'appareil.

REMARQUE : Prevoir un support additionnel des portes

pendant la reinstallation des charnieres. La force d'attraction

des aimants des portes ne suffit pas ales maintenir en place.

La page charge ...

Whirlpool EV161NZTQ01 Le manuel du propriétaire

Marque: Whirlpool

Modèle: EV161NZTQ01

Catégorie: Congélateurs

Taper: Le manuel du propriétaire

Télécharger le PDF

rapport

dans d''autres langues

English: Whirlpool EV161NZTQ01 Owner's manual

Whirlpool EV161NZTQ01 Le manuel du propriétaire

Whirlpool EV161NZTQ01 Le manuel du propriétaire

dans d''autres langues

Documents connexes

Autres documents