Panasonic PVGS55 Mode d'emploi

Spanish Quick Use Guide is included.

Guía para rápida consulta en español está incluida.

LSQT0760 B

For USA assistance, please call: 1-800-211-PANA(7262) or, contact us via the web at: http://www.panasonic.com/contactinfo

For Canadian assistance, please call: 1-800-561-5505 or visit us at www.panasonic.ca

Digital Video Camcorder

Operating Instructions

Model No.

PV-GS55

Mini

Before attempting to connect, operate or adjust this product,

please read these instructions thoroughly.

PV-GS55PP_Eng.book 1 ページ２００４年２月１０日　火曜日　午前１１時５１分

-2-

Things You Should Know

Thank you for choosing Panasonic!

You have purchased one of the most

sophisticated and reliable products on the

market today. Used properly, we’re sure it will

bring you and your family years of enjoyment.

Please take time to fill in the information on the

right.

The serial number is on the tag located on the

underside of your Palmcorder. Be sure to retain

this manual as your convenient Palmcorder

information source.

Safety Precautions

WARNING: TO PREVENT FIRE OR SHOCK HAZARD,

DO NOT EXPOSE THIS EQUIPMENT TO RAIN OR MOISTURE.

Your

Palmcorder is designed to record and play back in Standard Play (SP) mode and Long Play

(LP) mode

It is recommended that only cassette tapes that have been tested and inspected for use in Palmcorder

with the

mark be used.

AC Adaptor

≥The rating plate is on the underside of the AC Adaptor.

Ò

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,

DO NOT REMOVE COVER (OR BACK)

NO USER-SERVICEABLE PARTS INSIDE

REFER SERVICING TO QUALIFIED SERVICE PERSONNEL

This symbol warns the user

that uninsulated voltage within

the unit may have sufficient

magnitude to cause electric

shock.

Therefore, it is dangerous to

make any kind of contact with

any inside part of this unit.

This symbol alerts the user that

important literature concerning

the operation and maintenance

of this unit has been included.

Therefore, it should be read

carefully in order to avoid any

problems.

Date of Purchase

Dealer Purchased From

Dealer Address

Dealer Phone No.

Model No.

Serial No.

PV-GS55PP_Eng.book 2 ページ２００４年２月１０日　火曜日　午前１１時５１分

-3-

FCC Note: This equipment has been tested and found to comply with the limits for a Class B digital

device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable

protection against harmful interference in a residential installation. This equipment generates, uses,

and can radiate radio frequency energy and, if not installed and used in accordance with the

instructions, may cause harmful interference to radio communications. However, there is no guarantee

that interference will not occur in a particular installation. If this equipment does cause harmful

interference to radio or television reception, which can be determined by turning the equipment off and

on, the user is encouraged to try to correct the interference by one or more of the following measures:

≥Reorient or relocate the receiving antenna.

≥Increase the separation between the equipment and receiver.

≥Connect the equipment into an outlet on a circuit different from that to which the receiver is

connected.

≥Consult the dealer or an experienced radio/TV technician for help.

FCC Caution: To assure continued compliance, follow the attached installation instructions and use

only shielded interface cables with ferrite core when connecting to computer or peripheral devices.

Any changes or modifications not expressly approved by the party responsible for compliance could

void the user’s authority to operate this equipment.

CAUTION: TO PREVENT FIRE OR SHOCK HAZARD AND ANNOYING INTERFERENCE, USE THE

RECOMMENDED ACCESSORIES ONLY.

CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT,

FULLY INSERT.

CAUTION: DANGER OF EXPLOSION IF BATTERY IS INCORRECTLY REPLACED. REPLACE

ONLY WITH THE SAME OR EQUIVALENT TYPE.

≥Since this product gets hot during use, operate it in well ventilated place; do not install this equipment

in a confined space such as a bookcase or similar unit.

AS WITH ANY SMALL OBJECT, SD CARDS CAN BE SWALLOWED BY YOUNG CHILDREN. DO

NOT ALLOW CHILDREN TO HANDLE THE SD CARD.

Declaration of Conformity

Trade Name: Panasonic

Model No.: PV-GS55

Responsible party: Matsushita Electric Corporation of America

One Panasonic Way, Secaucus, NJ 07094

Support Contact: Panasonic Consumer Electronics Company

1-800-211-PANA (7262)

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two

conditions: (1)This device may not cause harmful interference, and (2) this device must accept

any interference received, including interference that may cause undesired operation.

WARNING

PV-GS55

PV-GS55PP_Eng.book 3 ページ２００４年２月１０日　火曜日　午前１１時５１分

-4-

IMPORTANT SAFETY INSTRUCTIONS

1) Read these instructions.

2) Keep these instructions.

3) Heed all warnings.

4) Follow all instructions.

5) Do not use this apparatus near water.

6) Clean only with dry cloth.

7) Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.

8) Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus

(including amplifiers) that produce heat.

9) Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two

blades with one wider than the other. A grounding type plug has two blades and a third grounding

prong. The wide blade or the third prong are provided for your safety. If the provided plug does not

fit into your outlet, consult an electrician for replacement of the obsolete outlet.

10) Protect the power cord from being walked on or pinched particularly at plugs, convenience

receptacles, and the point where they exit from the apparatus.

11) Only use attachments/accessories specified by the manufacturer.

12) Use only with the cart, stand, tripod, bracket, or the table specified by the

manufacturer, or sold with the apparatus. When a cart is used, use caution

when moving the cart/apparatus combination to avoid injury from tip-over.

13) Unplug this apparatus during lightning storms or when it will be left unused for

long periods of time.

14) Refer all servicing to qualified service personnel. Servicing is required when the apparatus has

been damaged in any way, such as when the power-supply cord or plug is damaged, liquid has

been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or

moisture, does not operate normally, or has been dropped.

S3125A

PV-GS55PP_Eng.book 4 ページ２００４年２月１０日　火曜日　午前１１時５１分

-5-

Precautions

USE & LOCATION

≥

TO AVOID SHOCK HAZARD

... Your

Palmcorder and power supply should not be

exposed to rain or moisture. Do not connect the

power supply or operate your Palmcorder if it

gets wet. Your Palmcorder has been designed

for outdoor use, however it is not designed to

sustain direct exposure to water, rain, sleet,

snow, sand, dust, or a direct splashing from a

pool or even a cup of coffee. This action could

permanently damage the internal parts of your

Palmcorder. Do not attempt to disassemble this

unit. There are no user serviceable parts inside.

Unplug your Palmcorder from the power supply

before cleaning.

≥

DO NOT AIM YOUR PALMCORDER AT THE

SUN OR OTHER BRIGHT OBJECTS

≥

DO NOT LEAVE THE PALMCORDER WITH

THE EVF AIMED DIRECTLY AT THE SUN AS

THIS MAY CAUSE DAMAGE TO THE

INTERNAL PARTS OF THE EVF

≥

DO NOT EXPOSE YOUR PALMCORDER TO

EXTENDED HIGH TEMPERATURE ...

Such

as, in direct sunlight, inside a closed car, next

to a heater, etc... This action could permanently

damage the internal parts of your Palmcorder.

≥

AVOID SUDDEN CHANGES IN

TEMPERATURE ...

If the unit is suddenly

moved from a cold place to a warm place,

moisture may form on the tape and inside the

unit.

≥

DO NOT LEAVE YOUR PALMCORDER OR

THE POWER SUPPLY TURNED ON WHEN

NOT IN USE.

≥

STORAGE OF YOUR PALMCORDER ...

Store

and handle your Palmcorder in a manner that

will not subject it to unnecessary movement

(avoid shaking and striking). Your Palmcorder

contains a sensitive pick-up device which could

be damaged by improper handling or storage.

CARE

≥

TO CLEAN YOUR PALMCORDER ...

Do not

use strong or abrasive detergents when cleaning

your Palmcorder body.

≥

TO PROTECT THE LENS ...

Do not touch the

surface of the lens with your hand. Use a

commercial Palmcorder lens solution and lens

paper when cleaning the lens. Improper cleaning

can scratch the lens coating.

≥

TO PROTECT THE FINISH OF YOUR

PALMCORDER ...

Before handling your

Palmcorder, make sure your hands and face are

free from any chemical products, such as suntan

lotion, as it may damage the finish.

Apparatus Claims of U.S. Patent Nos. 4,631,603, 4,577,216, and 4,819,098, licensed for limited

viewing.

This product incorporates copyright protection technology that is protected by method claims of certain

U.S. patents and other intellectual property rights owned by Macrovision Corporation and other rights

owners. Use of this copyright protection technology must be authorized by Macrovision Corporation,

and is intended for home and other limited viewing uses only unless otherwise authorized by

Macrovision Corporation. Reverse engineering or disassembly is prohibited.

WARNING

CAUTION

This class B digital apparatus complies with CANADIAN ICES-003.

A lithium ion/polymer battery that is recyclable powers the product

you have purchased. Please call 1-800-8-BATTERY for information

on how to recycle this battery.

U.S.A./CANADA CONSUMERS: ATTENTION:

PV-GS55PP_Eng.book 5 ページ２００４年２月１０日　火曜日　午前１１時５１分

-6-

Before opening the CD-ROM package, please read the following.

End User License Agreement (for USB Driver, WebCam Driver

and DV STUDIO)

You (“Licensee”) are granted a license for the Software defined in this End User Software Agreement

(“Agreement”) on condition that you agree to the terms and conditions of this Agreement. If Licensee

does not agree to the terms and conditions of this Agreement, promptly return the Software to

Matsushita Electric Industrial Co., Ltd. (“Matsushita”), its distributors or dealers from which you made

the purchase.

Article 1 License

Licensee is granted the right to use the software, including the information recorded or described on

the CD-ROM, instruction manuals, and any other media provided to Licensee (collectively “Software”),

but all applicable rights to patents, copyrights, trademarks and trade secrets in the Software are not

transferred to Licensee.

Article 2 Use by a Third Party

Licensee may not use, copy, modify, transfer or allow any third party, whether free of charge or not, to

use, copy or modify the Software, except as expressly provided for in this Agreement.

Article 3 Restrictions on Copying the Software

Licensee may make a single copy of the Software in whole or in part solely for back-up purpose.

Article 4 Computer

Licensee may only use the Software on a single computer at a single location.

Article 5 Reverse Engineering, Decompiling or Disassembly

Licensee may not reverse engineer, decompile, or disassemble the Software, except to the extent

either of them is permitted under law or regulation of the country where Licensee resides. Matsushita,

or its distributors or dealers will not be responsible for any defects in the Software or damage to

Licensee caused by Licensee’s reverse engineering, decompiling, or disassembly of the Software.

Article 6 Limitation of Liability

The Software is provided “AS-IS” without warranty of any kind, either expressed or implied, including,

but not limited to, warranties of non-infringement, merchantability and/or fitness for a particular

purpose. Further, Matsushita does not warrant that the operation of the Software will be uninterrupted

or error free. Matsushita or any of its distributors or dealers will not be liable for any damage suffered by

Licensee arising from or in connection with Licensee’s use of the Software.

Article 7 Export Control

Licensee agrees not to export or re-export to any country the Software in any form without the

appropriate export licenses under regulations of the country where Licensee resides, if necessary.

Article 8 Termination of License

The right granted to Licensee hereunder will be automatically terminated if Licensee violates any of the

terms and conditions of this Agreement. Upon such automatic termination, Licensee must destroy the

Software and related documentation together with all the copies thereof at Licensee’s own expense.

PV-GS55PP_Eng.book 6 ページ２００４年２月１０日　火曜日　午前１１時５１分

-7-

Before opening the CD-ROM package, please read the following.

G.726 Audio Decoder End User License Agreement

YOU SHOULD CAREFULLY READ THE FOLLOWING TERMS AND CONDITIONS. THIS IS A

LEGAL DOCUMENT WHICH CONSTITUTES YOUR AGREEMENT AS END USER FOR THE USE

OF THE SOFTWARE IN THAT PACKAGE. BY INSTALLING THIS SOFTWARE, YOU INDICATE

YOUR ACCEPTANCE OF THIS LIMITED USE SOFTWARE LICENSE.

IF YOU DO NOT AGREE TO THE TERMS OF THIS AGREEMENT, PROMPTLY RETURN THE DISK

PACKAGE AND THE ACCOMPANYING ITEMS WITH YOUR SALES RECEIPT TO YOUR VENDOR.

LIMITED USE SOFTWARE LICENSE

You, the Licensee, are granted a non-exclusive software license to use the Software and related

documentation supplied herein. The terms of this license are as follows:

1) You may use the Software on a single computer at a single location.

2) As you, the Licensee, own the physical media on which the Software is recorded, the Licensor of

the Software retains title and ownership thereof, regardless of the form or media in or on which the

original and other copies may exist. This License is not a sale of the original Software or any copy

thereof.

3) You are required to protect the copyright of the Software. You may NOT distribute or otherwise

make the Software or documentation available to any third party without the prior written consent of

the Licensor. You may be held legally responsible for any copyright infringement that is caused or

encouraged by your failure to abide by the terms of this License.

4) You may NOT modify or alter the Software. Any portion of the Software that is merged into or used

in conjunction with other software will continue to be the property of the Licensor and will be subject

to the terms of this License.

5) You are permitted to copy the Software for exclusive use as your working copy. Any such copy

must contain the same copyright notice and proprietary marking as the original Software.

6) You may not transfer or assign the Software or this License to any other person without the prior

written consent of the Licensor. Any authorized transferee of the Software shall be bound by the

same terms and conditions of this License and, in such case your license is automatically

terminated. In no event may you transfer, assign, rent, sell, or otherwise dispose of the Software on

a temporary or permanent basis except as expressly provided herein.

7) This License is effective until terminated. This License will terminate automatically without notice

from the Licensor if you fail to comply with any provision of this Agreement. Upon termination you

will destroy the Software together with all copies and modifications in any form.

8) The Software has been tested and the documentation has been reviewed. However, THE

LICENSOR MAKES NO WARRANTY OR REPRESENTATION INCLUDING THE IMPLIED

WARRANTIES OF MERCHANTABILITY AND FITNESS FOR USE, ALL OF WHICH ARE

EXCLUDED. Some states do not allow exclusion of implied warranties so the above disclaimer

may not apply to you.

9) The Licensor will not be liable or in any way responsible for any incidental or consequential

economic or property damage in connection with the Software or its documentation. Some states

do not allow the exclusion of incidental or consequential damages so the above exclusion may not

apply to you.

10) (Notice to U.S. Government End Users) The Software and Documentation are “Commercial Items”,

as that term is defined at 48 C.F.R. 2.101, consisting of “Commercial Computer Software” and

“Commercial Computer Software Documentation”, as such terms are used in 48 C.F.R. 12.212 or

48 C.F.R. 227.7202, as applicable. Consistent with 48 C.F.R. 12.212 or 48 C.F.R. 227.7202-1

through 227.7202-4, as applicable, the Commercial Computer Software and Commercial Computer

Software Documentation are being licensed to U.S. Government end users (A) only as Commercial

Items and (B) with only those rights as are granted to all other end users pursuant to the terms and

conditions herein.

PV-GS55PP_Eng.book 7 ページ２００４年２月１０日　火曜日　午前１１時５１分

-8-

Contents

Before Use

Quick Guide................................................... 10

Standard Accessories.................................... 12

Controls and Components............................. 12

The Remote Controller .................................. 15

Power Supply ................................................ 16

Charging Time and Available Recording

Time............................................................ 16

The One-touch Free Style Grip Belt .............. 17

Attaching the Lens Cap ................................. 17

Attaching the Shoulder Strap......................... 17

Inserting a Cassette....................................... 18

Using a Memory Card.................................... 18

Turning on the Palmcorder............................ 19

Selecting Modes ............................................ 19

Using the Viewfinder/LCD Monitor ................ 19

Using the Menu Screen ................................. 20

List of Menus ................................................. 21

Setting Date and Time................................... 24

Internal Lithium Battery Recharge................. 24

LP Mode ........................................................ 24

Audio Recording Mode.................................. 24

Recording Mode

About Recording............................................ 25

Recording on a Tape ..................................... 25

Recording a Still Picture on a Card

(Photoshot) ................................................. 26

Recording a Moving Picture on a Card

(MPEG4)..................................................... 27

Quick Start..................................................... 28

Self-timer Recording...................................... 28

Zoom In/Out Functions.................................. 28

Digital Zoom Function.................................... 29

Image Stabilizer Function.............................. 29

Fade In/Out Functions ................................... 30

Backlight Compensation Function ................. 30

MagicPix Functions ....................................... 30

Soft Skin Function ......................................... 31

Wind Noise Reduction Function .................... 31

Cinema Function ........................................... 31

Recording in Special Situations..................... 32

Recording in Natural Colors .......................... 32

Adjusting White Balance Manually ................ 33

Manual Shutter Speed Adjustment................ 34

Manual Iris Adjustment.................................. 34

Manual Focus Adjustment............................. 34

Digital Effect Functions.................................. 35

Playback Mode

Playing Back a Tape ..................................... 37

Finding a Scene You Want to Play Back....... 37

Slow Motion Playback ................................... 38

Still Playback/Still Advance Playback............ 38

Index Search Functions................................. 39

Playback Zoom Function ............................... 39

Playback Digital Effect Functions .................. 40

Playing Back a Card...................................... 40

Slide Show .................................................... 41

Creating a Title .............................................. 42

Adding a Title ................................................ 42

Writing Printing Data on a Card..................... 43

Protecting the Files on a Card ....................... 43

Deleting the Files Recorded on a Card ......... 43

Formatting a Card ......................................... 44

Enlarging a Movie Picture Size ..................... 44

Playing Back on Your TV .............................. 45

Editing Mode

Recording from a Tape onto a Card.............. 46

Recording Pictures from a Card onto a

Tape............................................................ 46

Audio Dubbing............................................... 46

Copying on an S-VHS (or a VHS)

Cassette...................................................... 47

Recording the Contents of Other

Equipment................................................... 48

Using the DV Cable for Recording ................ 48

With a PC

Using the Software with a Computer............. 49

Using USB Driver .......................................... 49

Using as a Web Camera ............................... 51

Using the DV STUDIO 3.1E-SE .................... 53

Using the G.726 Audio Decoder.................... 54

Using the ArcSoft Software ........................... 55

To disconnect USB cable safely .................... 57

If you no longer need software or driver

(Uninstall).................................................... 58

Notes ............................................................. 58

PV-GS55PP_Eng.book 8 ページ２００４年２月１０日　火曜日　午前１１時５１分

-9-

Others

Indications ..................................................... 61

Initializing the Modes ..................................... 62

Warning/Alarm Indications............................. 62

Notes and Hints ............................................. 63

Cautions for Use............................................ 69

Before Requesting Service (Problems and

Solutions).................................................... 73

Explanation of Terms..................................... 74

Specifications ................................................ 76

Palmcorder Accessory System...................... 78

Palmcorder Accessory Order Form

(For USA Customers) ................................. 79

Request for Service Notice (USA Only)......... 80

Limited Warranty (For USA Customers)........ 81

Customer Services Directory......................... 82

Warranty (For Canadian Customers) ............ 83

Index.............................................................. 84

Spanish Quick Use Guide/

Guía española para el uso rápido............... 86

PV-GS55PP_Eng.book 9 ページ２００４年２月１０日　火曜日　午前１１時５１分

Before Use

-10-

Quick Guide

1

Attach the Battery to the AC Adaptor and

charge it.

≥Before use, fully charge the Battery.

≥Since the Battery will not be charged when

the DC Cable is connected to the AC

Adaptor, disconnect it from the AC Adaptor.

≥The [CHARGE] Lamp lights up, and charging

starts.

≥When the [CHARGE] Lamp goes off,

charging is completed.

2

Attach the charged Battery to the

Palmcorder.

ª

Inserting a Cassette

1

Slide the [OPEN/EJECT] Lever

1

toward

the front and pull down to open the

Cassette Compartment Cover.

2

Insert a Cassette.

3

Close the Cassette Holder by pressing the

[PUSH] mark

2

.

4

Close the Cassette Compartment Cover.

OPEN /

EJECT

1

PUSH

2

ª

Inserting a Card

1

Slide the [OPEN] Lever

1

to open the Card

Slot Cover

2

.

2

While holding the Memory Card with its cut

corner facing right

4

, insert it into the Card

Slot

3

.

3

Close the Card Slot Cover

2

securely.

ª

Recording on a Tape

1

Set the [OFF/ON] Switch

1

to [ON].

≥The [POWER] Lamp 2 lights up.

2

Set the Mode Dial to Tape Recording Mode.

3

Press the Recording Start/Stop Button.

≥Recording starts.

4

Press the Recording Start/Stop Button

again to pause the recording.

ª

Recording a Still Picture on a Card

(Photoshot)

1

Set the Mode Dial to Card Recording Mode.

2

Press the [PHOTO SHOT] Button.

4

2

1

3

OPEN

ON

OFF

1

2

POWER

PC

S

D

PC

S

D

PHOTO SHOT

PV-GS55PP_Eng.book 10 ページ２００４年２月１０日　火曜日　午前１１時５１分

Before Use

-11-

ª Recording a Moving Picture on a Card

(MPEG4)

1

Set the Mode Dial to Card Recording Mode.

2 Press the Recording Start/Stop Button.

3 Press the Recording Start/Stop Button

again to pause the recording.

ª Playing Back a Tape

1 Set the [OFF/ON] Switch 1 to [ON].

≥The [POWER] Lamp 2 lights up.

2 Set the Mode Dial to Tape Playback Mode.

3 Press the [6] Button to rewind the tape.

4 Press the [1] Button to start playback.

5 Press the [∫] Button to stop playback.

PC

S

D

ON

OFF

1

2

POWER

PC

S

D

STILL

ENTER

FADE

is

STILL

ENTER

FADE

is

STILL

ENTER

FADE

is

ª Playing Back a Card

It plays back files recorded on a Card.

1 Set the Mode Dial to Picture Playback Mode

or MPEG4 Playback Mode.

2 Start Playback.

[PICTURE]:

1: Starting the Slide Show

5: Playing back the next picture

6: Playing back the previous picture

∫: Stop the Slide Show

;: Pause the Slide Show

[MPEG4]:

1: Playing back the File

5: Selecting the next file (When you tap this

button during playback, you can search the

next file, and when you keep pressing it, cue

playback is activated.)

6: Selecting the previous file (When you tap

this button during playback, you can search

the beginning of the file, and when you keep

pressing it, review playback is activated.)

∫: Stop playing back

;: Pause playing back

PC

S

D

P

C

S

D

PV-GS55PP_Eng.book 11 ページ２００４年２月１０日　火曜日　午前１１時５１分

Before Use

-12-

Before Use

Standard Accessories

Illustrated are accessories supplied with the

Palmcorder.

1) AC Adaptor, DC Cable and AC Cable

-16-

2) Battery Pack -16-

3) Remote Controller and Button-Type

Battery

-14-

4) Magic Wire Remote Control with Narration

Mic

-14-

5) Lens Cap and Lens Cap Cord -17-

6) AV Cable -45-

7) S-Video Cable -45-

8) Shoulder Strap -17-

9) SD Memory Card -18-

10) USB Connection Kit (USB Cable and

CD-ROM)

-49-

11) Cleaning Cloth

CAUTION:

This unit will operate on 110/120/220/240 V

AC. An AC plug adaptor may be required for

voltages other than 120 V AC. Please

contact either a local or foreign electrical

parts distributor for assistance in selecting

an alternate AC plug. We recommend using

the accessory power plug adaptor

(VJSS0070) in an area which has special AC

outlets.

PV-DAC14D

1)

2)

K2KC4CB00009

6)5)

8)

9) 10)

VFA0425

7)

VFC3506

CR2025

N2QCBD000030

K2KC4CB00008

N2QAGC000018

CGA-DU07

3) 4)

VGQ7697

VGQ7304

11)

VFC3778

K2GJ2DZ00017 K2CA2EA00005

Controls and Components

ª Palmcorder

(1) LCD Monitor Open Knob [OPEN4] -19-

(2)

LCD Monitor -19-, -72-

(3)

Card Slot Cover Open Lever [OPEN] -18-

(4)

Card Slot -18-

(5)

Card Slot Cover -18-

(6)

MagicPix Button [MAGICPIX] -30-

(7)

Soft Skin Button [SOFT SKIN] -31-

(8)

Tele Macro Button [TELE MACRO] -28-

(9)

Multi Button [MULTI] -35-

Picture-in-Picture Button [P-IN-P] -36-

(10)

Recording Check Button [S] -25-

Recording Button [REC] -48-

(11)

Backlight Button [BACK LIGHT] -30-

(12)

Pause Button [;] -40-

Still Button [STILL] -26-

(13)

Fast Forward/Cue Button [5] -37-, -40-

(14)

Play Button [1] -37-, -40-

Enter Button [ENTER] -20-

(15)

Stop Button [∫] -37-, -40-

Fade Button [FADE] -30-

(16)

Rewind/Review Button [6] -37-, -40-

(17)

Card Access Lamp -18-

(18)

Menu Button [MENU] -20-

(19)

Lens Hood -72-

(20)

Recording Lamp -25-

(21)

Lens

Due to limitations in LCD production

technology, there may be some tiny bright or

dark spots on the LCD Monitor screen.

However, this is not a malfunction and does

not affect the recorded picture.

STILL

ENTER

FADE

MENU

BACK

LIGHT

MULTI/

P-IN-P

MAGIC

PIX

SOFT

SKIN

TELE

MACRO

S

REC

is

(1)(2) (3) (4) (5)

(6)

(7) (8)

(12)(13)(14)(15)(16)

(17)

(10)

(9)

(11)

(18)

(19)

(20)

(21)

(22)

(23)

(24)

(25)

(26)

(27)

PV-GS55PP_Eng.book 12 ページ２００４年２月１０日　火曜日　午前１１時５１分

Before Use

-13-

(22) Microphone (built-in, stereo) -29-, -31-

(23)

Lock Button -17-

(24)

Lock Cover -17-

(25)

Accessory Shoe

(26) Eyecup

(27) Power LCD Button [POWER LCD] -20-

Power LCD Lamp -20-

(28) Cassette Holder

(29) Cassette Compartment Cover -18-

(30)

Speaker -37-

(31)

USB Jack [ ] -50-

(32)

S-Video Input/Output Jack

[S-VIDEO IN/OUT]

-45-

(33)

White Balance Sensor -33-

Remote Control Sensor -15-

(34)

Jack for Magic Wire Remote Control with

Narration Mic [REMOTE]

-26-

Microphone Jack [MIC]

≥When connecting an external microphone

or audio equipment to this jack, the built-in

microphone does not operate.

≥When connecting the Magic Wire Remote

Control with Narration Mic to this jack and

the [TALK] Button is pressed, the built-in

microphone does not operate.

-26-

≥When connecting the pin plug of the Magic

Wire Remote Control with Narration Mic to

this jack, plug it in as far as it goes.

≥A compatible plug-in powered microphone

can be used. Please consult your dealer for

more information.

≥The microphone may make noises

depending on the type used. In this case,

we recommend using the battery with the

Palmcorder to reduce noises instead of the

AC adaptor.

(35) Audio-Video Input/Output Jack

[AV IN/OUT]

-45-

Headphone Jack [PHONES]

≥Connecting an AV Cable to this jack

activates the Palmcorder’s built-in speaker,

but connecting a headphone, etc.

deactivates it.

S-VIDEO

IN/OUT

AV IN/OUT

PHONES

REMOTE/MIC

DV

(PLUG IN POWER)

(28)

(29)

(30)

(31)

(32)

(33)

(34) (35) (36)

≥When connecting the pin plug of the AV

Cable to this jack, plug it in as far as it goes.

≥When using headphones, set [AV JACK] of

the [AV IN/OUT] or [INITIAL] sub-menu to

[OUT/PHONES]. If you set [AV JACK] to

[OUT], you may hear noises on the right.

(36) DV Terminal [DV] -48-

≥Connect this to the digital video equipment.

(37) Viewfinder -19-, -72-

(38)

Eyepiece Corrector Knob -19-

(39)

Photoshot Button [PHOTO SHOT] -26-, -46-

(40)

Zoom Lever [W/T], [sVOL/JOGr] -28-, -37-

(41)

Cassette Eject Lever [OPEN/EJECT] -18-

(42)

Reset Button [RESET] -63-

(43)

Mode Dial -19-

(44)

Quick Start Recording Button

[QUICK START]

-28-

Quick Start Recording Lamp -28-

(45)

Recording Start/Stop Button -25-, -27-

(46)

Power Switch [OFF/ON] -19-, -25-, -69-

(47)

[POWER] Lamp -19-, -25-, -37-

(48)

Mode Selector Switch

[AUTO/MANUAL/FOCUS]

-25-, -32-, -34-

(49)

Shoulder Strap Holders -18-

(50)

Grip Belt (One-touch Free Style Grip Belt)

-17-

(51)

Battery Eject Button [PUSH BATT] -16-

(52)

Battery Holder

(53) Tripod Receptacle

≥Used for mounting the Palmcorder on an

optional tripod.

Due to limitations in LCD production

technology, there may be some tiny bright or

dark spots on the Viewfinder screen.

However, this is not a malfunction and does

not affect the recorded picture.

PC

S

D

START

ON

OFF

QUICK

POWER

(37)(38)(39)(40)(41)(42)

(43)

(44)

(45)

(46)

(47)

(48)(49)(50)

(51)

(52) (53)

PV-GS55PP_Eng.book 13 ページ２００４年２月１０日　火曜日　午前１１時５１分

Before Use

-14-

ª Remote Controller

Using the wireless Remote Controller that is

supplied with the Palmcorder, most of the

Palmcorder functions can be operated from a

distance.

(54) Date/Time Button [DATE/TIME] -62-

(55)

Indication Output Button [OSD] -45-

(56)

Display Button [DISPLAY] -62-

(57)

Reset Button [RESET] -75-

(58)

Recording Button [¥REC] -48-

(59)

Audio Dubbing Button [A.DUB] -46-

(60)

Cursor Buttons for Variable Speed

Search Function [π, ∫]

-38-

Direction Buttons for Playback Zoom

Function [π, ∑, ∏, ∫]

-40-

(61)

Slow Motion/Still Advance Buttons [E, D]

(E: reverse, D:forward)

-38-

(62)

Index Search Buttons [:, 9]

(:: reverse, 9:forward)

-39-

(63)

Selection Button [SELECT] -40-

(64)

Store Button [STORE] -40-

(65)

Off/On Button [OFF/ON] -40-

(66)

Zoom/Volume Button [ZOOM/VOL]

-28-, -37-, -39-

(67)

Variable Speed Search Button

[VAR. SEARCH]

-38-

(68)

Menu Button [MENU] -20-

ZOOM

INDEX INDEX

SELECT

STORE

STOP

KL

∫

OSD

DISPLAY

V

/REW

STILL ADV

OFF/ON

P.B . D I GI TA L

DATE/

TIME

RESET

TITLE

T

W

sVOL r

¥REC

MULTI/

P-IN-P

PHOTO

SHOT

START/

STOP

A.DUB

PLAY

PAU SE

FF/

W

STILL ADV

ENTER

61 5

;

ED

VAR .

SEARCH

MENU

P.B. ZOOM

(54)

(55)

(56)

(57)

(58)

(59)

(60)

ZOOM

INDEX INDEX

SELECT

STORE

STOP

KL

∫

OSD

DISPLAY

V

/REW

STILL ADV

OFF/ON

P.B . D I GI TA L

DATE/

TIME

RESET

TITLE

T

W

sVOL r

¥REC

MULTI/

P-IN-P

PHOTO

SHOT

START/

STOP

A.DUB

PLAY

PAU SE

FF/

W

STILL ADV

ENTER

61 5

;

ED

VAR .

SEARCH

MENU

P.B. ZOOM

(61)

(62)

(63)

(64)

(65)

(66)

(67)

(68)

(69)

Photoshot Button [PHOTO SHOT] -26-, -46-

(70)

Title Button [TITLE] -42-

(71)

Multi-Picture/Picture-in-Picture Button

[MULTI/P-IN-P]

-35-, -41-

(72)

Rewind/Review Button [6] -37-, -40-

(73)

Pause Button [;] -38-, -40-

(74)

Stop Button [∫] -37-, -40-

(75)

Recording Start/Stop Button

[START/STOP]

-25-, -27-

(76)

Play Button [1] -37-, -40-

(77)

Fast-forward/Cue Button [5] -37-, -40-

(78)

Playback Zoom Button [P.B. ZOOM] -39-

(79)

Enter Button [ENTER] -20-

ª Magic Wire Remote Control with

Narration Mic

This controller allows the scene to be shot from

various angles, high to low, and is also

convenient when a Tripod is used. When the

controller is not in use, attach the clip to the Grip

Belt for convenience.

This controller makes it easier for left-handed

users to use the Palmcorder.

(80) Microphone [MIC] -26-

(81)

Recording Start/Stop Button [REC]

(82) Zoom Lever [W/T]

≥Zoom speed changes in 2 stages.

(83) Photoshot Button [PHOTO SHOT]

(84) Microphone Switch Button [TALK] -26-

≥When the Magic Wire Remote Control with

Narration Mic is connected to [REMOTE]

Jack and the [TALK] Button is pressed, the

narration microphone is activated and the

built-in microphone on the Palmcorder is

deactivated.

(85) Clip

ZOOM

INDEX INDEX

SELECT

STORE

STOP

KL

∫

OSD

DISPLAY

V

/REW

STILL ADV

OFF/ON

P.B.DIGITAL

DATE/

TIME

RESET

TITLE

T

W

sVOL r

¥REC

MULTI/

P-IN-P

PHOTO

SHOT

START/

STOP

A.DUB

PLAY

PAU SE

FF/

W

STILL ADV

ENTER

61 5

;

ED

VAR .

SEARCH

MENU

P.B. ZOOM

(69)

(70)

(75)

(78)

(79)

(76)

(77)

(71)

(72)

(73)

(74)

(80)

(81)

(82)

(83)

(84)

(85)

PV-GS55PP_Eng.book 14 ページ２００４年２月１０日　火曜日　午前１１時５１分

Before Use

-15-

≥Insert the plug securely into the [REMOTE]

Jack as far as it will go. A loose connection

will affect normal operation.

The Remote Controller

ª Inserting a Button-type Battery

Before using the Remote Controller, insert the

supplied button-type battery.

1 While pressing the Lock Button 1, pull out

the Battery Holder.

2 Insert the button-type battery with the (i)

marking facing upwards.

3 Insert the Battery Holder into the Remote

Controller.

≥When the button-type battery is exhausted,

replace it with a new CR2025 battery. (A battery

is normally expected to last about 1 year.

However, it depends on operation frequency.)

≥Make sure to match the poles correctly when

inserting the battery.

Warning

Danger of explosion if battery is

incorrectly replaced.

Replace only with the same or equivalent

type recommended by the equipment

manufacturer. Discard used batteries

according to manufacturer’s instructions.

Risk of fire, explosion and burns. Do not

recharge, disassemble, heat above 212°F

(100°C) or incinerate. Keep the

Button-Type battery out of the reach of

children. Never put Button-Type battery

in mouth. If swallowed, call your doctor.

Replace battery with Panasonic PART NO.

CR2025 only. Use of another battery may

present a risk of fire or explosion.

Caution: Battery may explode if mistreated.

Dispose of used battery promptly. Keep

away from children.

Do not recharge, disassemble or dispose of

in fire.

1

ª Using the Remote Controller

1 Direct the Remote Controller at the Remote

Control Sensor

(33) of the Palmcorder and

press an appropriate button.

≥Distance from the Palmcorder: Within

approximately 15 feet (5 meters)

≥Angle: Approximately 15o in the vertical and

horizontal directions from the central

axis

≥The above operating ranges are for indoor use.

Outdoors or under strong light, the Palmcorder

may not operate properly even within the above

ranges.

≥Within a 3 feet (1 meter) range, you can also

use the Remote Controller on the LCD Monitor

side of the Palmcorder.

Selecting Remote Controller Modes

When 2 Palmcorders are used simultaneously,

they can be operated individually by selecting

different Remote Controller Modes.

≥If the Remote Controller Mode of the

Palmcorder and that of the Remote Controller

do not match, [REMOTE] Indication is

displayed.

Setup on the Palmcorder:

Set [REMOTE] on the [INITIAL] Sub-Menu to the

desired Remote Controller Mode. (

-22-)

Setup on the Remote Controller:

[VCR1]: Press the [D] Button and [∫] Button

simultaneously. 1

[VCR2]: Press the [E] Button and [∫] Button

simultaneously. 2

≥When the battery in the Remote Controller is

replaced, the mode is automatically reset to

[VCR1] Mode.

15˚

(33)

INDEX INDEX

SELECT

STOP

KL

∫

STILL ADV

T

W

PAU SE

STILL ADV

61 5

;

ED

P.B. ZOOM

21

PV-GS55PP_Eng.book 15 ページ２００４年２月１０日　火曜日　午前１１時５１分

Before Use

-16-

Power Supply

ª Using the AC Adaptor

1 Connect the DC Cable to the Palmcorder.

2 Connect the DC Cable to the AC Adaptor.

3 Connect the AC Cable to the AC Adaptor

and the AC Jack.

≥The AC Cable’s outlet plug does not fit

entirely into the AC Adaptor jack. A gap will

remain as shown 1.

≥Before connecting or disconnecting the

power supply, set the [OFF/ON] Switch on

the Palmcorder to [OFF] and make sure that

[POWER] Lamp is not lit.

ª Using the Battery

Before use, fully charge the Battery.

≥We recommend using a Panasonic Battery.

≥We cannot guarantee the quality of this

Palmcorder when batteries from other

companies are used.

1 Attach the Battery to the AC Adaptor and

charge it.

≥Since the Battery will not be charged when

the DC Cable is connected to the AC

Adaptor, disconnect it from the AC Adaptor.

≥The [CHARGE] Lamp lights up, and charging

starts.

≥When the [CHARGE] Lamp goes off,

charging is completed.

≥When the battery is completely discharged,

the [CHARGE] lamp blinks at first, but the

battery is charged normally. When the

temperature of the battery is too high or low,

the [CHARGE] lamp blinks and the charging

time becomes longer than usual.

1

2 Attach the charged Battery to the

Palmcorder.

Disconnecting the Power Source

Set the [OFF/ON] Switch

(46) to [OFF] and, while

pressing the [PUSH BATT] Button

(51), slide the

Battery or DC Cable upward to disconnect it.

≥For other notes concerning this item, see

-63-.

Charging Time and Available

Recording Time

A Charging Time

B Maximum Continuous Recording Time

≥“1h30min.” indicates 1 hour and 30 minutes.

≥Battery CGA-DU07 is supplied.

≥The times shown in the table are approximate

times. The numbers indicate the recording time

when the Viewfinder is used. The numbers in

parentheses indicate the recording time when

the LCD Monitor is used. In actual use, the

available recording time may be shorter.

≥The times shown in the table are for continuous

recording at a temperature of 68oF (25oC) and

humidity of 60%. If the Battery is charged at a

higher or lower temperature, the charging time

may be longer.

≥The available recording time becomes shorter if

you use both of Viewfinder and LCD Monitor

simultaneously when using the 0 Lux MagicPix

function or rotating the LCD Monitor frontward

to record yourself or setting [EVF ON/AUTO] to

[ON].

CGA-DU07 A 1h30min.

B 2h15min. (1h50min.)

CGA-DU14 A 2h45min.

B 4h30min. (3h40min.)

CGA-DU21 A 3h55min.

B 6h45min. (5h30min.)

PUSH

BATT

ON

OFF

(51)

(46)

PV-GS55PP_Eng.book 16 ページ２００４年２月１０日　火曜日　午前１１時５１分

Before Use

-17-

The One-touch Free Style Grip Belt

ª To Use as a Grip Belt

Adjust the length of the Grip Belt to the size of

your hand.

1 Detach the end of the Grip Belt.

2 Adjust the length of the Grip Belt to the size

of your hand.

3 Reattach the Grip Belt.

ª To Use as a Hand Strap

Using the Grip Belt as the hand strap makes it

easier to handle and carry a Palmcorder. It is

more convenient to use with the Magic Wire

Remote Control with Narration Mic.

1 Open the Lock Cover (24) by holding the

tabs on both sides 1, press the Lock

Button

(23) and detach the Grip Belt.

2 Detach the end of the Grip Belt.

3 Slide A in the direction of the arrow and

reattach the Grip Belt.

1

(23)

(24)

A

4 Attach the Grip Belt around your wrist.

≥When returning the Grip Belt to the Grip Belt

Attachment, press the Lock Cover 2 to ensure

that it is securely locked.

Attaching the Lens Cap

To protect the Lens surface, attach the Lens Cap.

1 Pass one end of the Lens Cap Cord through

the attached eye on the Lens Cap. Then

pass the other end through the loop made

by itself and pull tight.

2 Pass the end of the Lens Cap Cord through

the hole in the Grip Belt Attachment and the

Lens Cap through the Lens Cap Cord.

≥The removed Lens Cap can be hooked onto the

Grip Belt. (It is not possible when using as a

hand strap.)

≥When you are not recording, be sure to cover

the Lens with the Lens Cap for protection.

Attaching the Shoulder Strap

We recommend that you attach the Shoulder

Strap before going out to avoid dropping the

Palmcorder.

2

PV-GS55PP_Eng.book 17 ページ２００４年２月１０日　火曜日　午前１１時５１分

Before Use

-18-

1 Pull the end of the Shoulder Strap through

the Shoulder Strap Holder

(49) on the

Palmcorder.

2 Fold the end of the Shoulder Strap, run it

through the Shoulder Strap Length

Adjuster, and pull it.

≥Pull it out more than 1 inch (2 cm) 1 from the

Shoulder Strap Length Adjuster so that it

cannot slip off.

≥Attach the other end of the Shoulder Strap to

the other Shoulder Strap Holder in the same

way.

Inserting a Cassette

1 Slide the [OPEN/EJECT] Lever (41) toward

the front and pull down to open the

Cassette Compartment Cover.

2 Insert a Cassette.

3 Close the Cassette Holder by pressing the

[PUSH] mark 1.

4 Close the Cassette Compartment Cover.

ª Accidental Erasure Prevention

Opening the accidental erasure prevention slider

1 on the cassette (by sliding it to the [SAVE]

arrow direction) prevents recording. To enable

(49)

1

OPEN /

EJECT

(41)

PUSH

1

recording, close the accidental erasure

prevention slider (by sliding it to the [REC] arrow

direction).

≥For other notes concerning this item, see

-63-.

Using a Memory Card

A Card can be used to record pictures.

≥Use a genuine SD Memory Card or

MultiMediaCard manufactured by Panasonic

only.

Before inserting or removing a Card, be sure

to turn off the Palmcorder.

≥Otherwise, the Palmcorder may not function

properly or it may cause the loss of recorded

data in a Card.

ª Inserting a Card

1 Slide the [OPEN] Lever (3) to open the Card

Slot Cover

(5).

2 While holding the Memory Card with its cut

corner facing right 1, insert it into the Card

Slot

(4).

3 Close the Card Slot Cover (5) securely.

Removing the Card

Open the Card Slot Cover and press the center of

the Card and then pull it straight out.

≥After removing the Card, close the Card Slot

Cover.

≥The Palmcorder may be damaged if the Card is

forced out when the Card is fully inserted.

ª Card Access Lamp (17)

While the Palmcorder is accessing the Card

(reading, recording, playback or erasing), the

Card Access Lamp lights up.

R E C

SAVE

1

OPEN

(3)

(5)

1

(4)

(17)

PV-GS55PP_Eng.book 18 ページ２００４年２月１０日　火曜日　午前１１時５１分

Before Use

-19-

≥While the Card Access Lamp is on, never

attempt to open the Card Slot Cover, to pull out

the Card, to turn off the Palmcorder, or to turn

the Mode Dial. Such actions will damage the

Card, and recorded data, and cause the

Palmcorder to malfunction.

Turning on the Palmcorder

ª How to Turn on the Power

1 Set the [OFF/ON] Switch (46) to [ON] while

pressing the button 1.

≥The [POWER] Lamp

(47) lights up.

ª How to Turn off the Power

1 Set the [OFF/ON] Switch (46) to [OFF] while

pressing the button 1.

Selecting Modes

You can choose a desired mode by rotating the

Mode Dial.

1 Rotate the Mode Dial (43).

:Tape Recording Mode

Use this mode when recording pictures on a tape.

Also, you can record still pictures on the card

simultaneously during recording on a tape.

:Tape Playback Mode

Use this mode when playing back the recorded

scene on a tape.

:Card Recording Mode

Use this mode when recording still picture or

moving picture on a card.

:Picture Playback Mode

Use this mode when playing back the recorded

still picture on a card.

:MPEG4 Playback Mode

Use this mode when playing back the recorded

moving picture on a card.

:PC Mode

Use this mode when you want to connect the

Palmcorder to your Personal Computer.

ON

OFF

POWER

1

(46)

(47)

ON

OFF

(46)

1

P

C

S

D

(43)

PC

Using the Viewfinder/LCD Monitor

ª Using the Viewfinder

Before using the Viewfinder, adjust the field of

view so that the displays inside the Viewfinder

become clear and easy to read.

1 Pull the Viewfinder.

2 Adjust by turning the Eyepiece Corrector

Knob

(38).

To Use the Viewfinder at the Same Time as the

LCD Monitor

Set [LCD/EVF] >> [EVF ON/AUTO] >> [ON].

≥The Viewfinder does not turn off even if the LCD

Monitor is opened.

≥When you turn the Palmcorder off, this setting is

cancelled.

ª Using the LCD Monitor

With the LCD Monitor open, you can also record

the picture while watching it.

1 Using your Thumb on the [OPEN4] Knob

(1) and pull the LCD Monitor (2) out in the

direction of the arrow.

≥The Viewfinder is now deactivated.

≥The LCD Monitor can be opened a maximum

of 120o. If you open the LCD monitor by 120o,

it becomes convenient to operate menus or to

play back pictures.

2 Adjust the LCD Monitor angle according to

the desired recording angle.

≥The LCD Monitor can rotate a maximum of

180o 1 from the vertical position upwards

and a maximum of 90o 2 to the downward

direction. Forcefully rotating the LCD Monitor

beyond these ranges will damage the

Palmcorder.

12:30:45PM

OCT 15 2004

12:30:45PM

OCT 15 2004

12:30:45PM

OCT 15 2004

12:30:45PM

OCT 15 2004

(38)

(2)

(1)

PV-GS55PP_Eng.book 19 ページ２００４年２月１０日　火曜日　午前１１時５１分

Before Use

-20-

Closing the LCD Monitor

Push the LCD Monitor until it is securely locked.

≥Make sure the Card Slot Cover is closed.

ª Adjusting Brightness and Color Level

When [LCD/EVF SET] on the [LCD/EVF]

Sub-Menu is set to [YES], the following items are

displayed.

LCD Brightness [LCD BRIGHTNESS]

Adjusts the brightness of the image on the LCD

screen.

LCD Color Level [LCD COLOR LEVEL]

Adjusts the color saturation of the image on the

LCD screen.

Brightness of the Viewfinder

[EVF BRIGHTNESS]

Adjusts the brightness of the image in the

Viewfinder.

To Adjust

Press the [;/∫] Button and select the item to be

adjusted, and then press the [6/5] Button to

raise or lower the number of vertical bars in the

Bar Indication.

≥More vertical bars indicates stronger brightness

or color saturation.

To Increase the Brightness of the Entire LCD

Monitor

Press the [POWER LCD]

(27) Button.

When you press [POWER LCD] button, the LCD

monitor becomes about twice as bright as usual.

≥The [POWER LCD] Lamp

(27) lights up.

≥When turning the power on while using AC

Adaptor, [POWER LCD] function is

automatically effective.

To Resume Normal Brightness

Press the [POWER LCD] Button again.

≥These adjustments do not affect the recorded

images.

≥For other notes concerning this item, see

-72-.

2

90

o1

180

o

1LCD BRIGHTNESS

[-]||||----[+]

LCD COLOR LEVEL

[-]||||----[+]

EVF BRIGHTNESS

[-]||||----[+]

;/∫:SELECT &/%:SETUP

!/MENU:EXIT

LCD/EVF SETUP

POWER

LCD

(27)

Using the Menu Screen

To facilitate the selection of a desired function or

setup, this Palmcorder displays various function

setups on Menus.

≥When operating the menu with the Viewfinder,

set [LCD/EVF] >> [EVF ON/AUTO] >> [ON] or

rotate the LCD monitor by 180o.

1 Press the [MENU] Button (18).

≥The Menu corresponding to the Mode

selected by using the Mode Dial

(43) is

displayed.

2 Press the [;/∫] Button to select a desired

Sub-Menu.

≥Press the [;/∫] Button to display the

highlighted item.

3 Press the [5] Button to display the

selected Sub-Menu.

4 Press the [;/∫] Button to select the item.

5 Press the [5] Button to display the

selected item.

6 Press the [;/∫] Button to select the desired

mode and press [ENTER] Button to

determine the setting.

≥While a Menu is displayed, you cannot record or

play back. Menus can be displayed during

playback but not during recording. The above

operations can be done using the [MENU]

Button, [π, ∑, ∏, ∫] Buttons and [ENTER]

Button on the Remote Controller. (

-14-)

To Return the Previous Screen

Press the [6] Button.

To Exit the Menu Screen

Press the [MENU] Button again.

About the Menu Mode Setting

The setting selected on the Menu will be retained

even when the Palmcorder is turned off. (The

setups of [EFFECT2] (

-35-) are not retained.)

However, if the Battery or AC Adaptor is

disconnected before turning off the Palmcorder,

the selected setup may not be retained.

≥Menu operation flow is shown in this text by >>.

MENU

STILL

ENTER

FADE

is

(18)

(43)

PC

S

D

PV-GS55PP_Eng.book 20 ページ２００４年２月１０日　火曜日　午前１１時５１分

La page charge ...

Panasonic PVGS55 Mode d'emploi

Panasonic PVGS55 Mode d'emploi

dans d''autres langues

Documents connexes

Autres documents