Magtek DynaPAD Quick Installation Guide

Taper
Quick Installation Guide
Navigating the Admin Menu
Begin by pressing the ADMIN button on the top right of the keypad. Scroll
through the additional administrative options by pressing the 2 button.
Navigation
Press 4 to navigate Left.
Press 6 to navigate Right.
Press 2 to navigate Down.
Press 8 to navigate Up.
LCD Brightness
Press 2 to see the LCD Brightness setting.
Options include Low, medium and High.
Pressing the 4 button lowers the LCD
Brightness. Pressing the 6 button increases the
LCD Brightness.
CVV Setting
Press 2, after LCD brightness settings, for the
CVV setting. Press 4 to turn this setting Off or
press 6 to turn this setting On.
MOD10
Press 2, after CVV setting, for MOD10 Check
verication setting. Press 4 to turn this setting
Off or press 6 to turn this setting On. Press 2,
after MOD10, for the Exit prompt, “TO EXIT AND
SAVE PRESS ENTER”. Press the Enter button to
save the settings and complete administrative
tasks.
LED
The reader has one LED on the reader body. The LED indicator will be either
off, red, green, or amber. When the reader is not powered, the LED will be
off. When the reader is rst plugged in, the LED will be solid amber. After
the reader is plugged in, the host will try to enumerate the reader. Once the
reader is enumerated the LED will turn solid green.
DynaPAD Secure Card Reader Authenticator (SCRA) is MagneSafe® secured
and offers a reliable, long swipe path with complete security features for
the peace of mind you can trust. DynaPAD also features an easy-to-use
keypad with a large 2 line x 16 digit liquid crystal display (LCD) for manual
entry of card data. Specically designed to meet PCI DSS requirements to
secure cardholder data, DynaPAD employs the industry standard, Triple DES
encryption. For greater exibility, its USB interface can be congured for USB
HID or USB Keyboard Emulation, conveniently connecting to many existing
merchant application and making them more secure.
Major Components
USB HID or USB KB Connection
DynaPAD can be operated in two different modes:
HID (herein referred to as “HID mode”) and
HID with Keyboard Emulation (herein referred to as “KB mode”)
When operating in the HID mode, DynaPAD will not use keyboard emulation.
It will behave like a vendor dened HID device. When congured for the
Keyboard Emulation (KB) mode, DynaPAD will emulate a USB HID United
States keyboard or, optionally, any international keyboard using ALT ASCII
code keypad key combinations or customizable key maps.
Windows Plug-n-Play
On hosts with the Windows operating system, the rst time the reader is
plugged into a specic USB port, Windows will pop up a dialog box, which will
guide you through the process of installing a device driver for the reader.
Caution: When in Keyboard Emulation mode, if another key board is
connected to the same host as the reader and a key is pressed on the other
keyboard while the reader is transmitting, then the data transmitted by the
reader may get corrupted.
Installation Location
Installation location should be on a at, accessible surface with at least four
inches (4”) clearance on either end, to allow room to swipe a card.
DynaPAD - PN 21087008
Secure Card Reader Authenticator
with Encrypting Key pad
Quick Installation Guide
Setup and Installation
MagTek
®
Inc., 1710 Apollo Court, Seal Beach CA 90740 | p 562-546-6400 | support 651-415-6800 | f 562-546-6301 | www.magtek.com
MagTek®, MagnePrint®, and MagneSafe® are registered trademarks of MagTek, Inc.
MAGTEK: Registered to ISO 9001:2015 © Copyright 2021 MagTek, Inc. PN D99800083 rev 40 4/21
Card Read
A card may be swiped through the reader slot when the LED is solid green or
ashing green. The magnetic stripe must face toward the keypad and may
be swiped in either direction. If there is data encoded on the card, DynaPAD
will attempt to read the data, encrypt it, and then send the results to the
host via a USB HID input report or, if in Keyboard Emulation mode, as if the
data was being typed on a keyboard. After the results are sent to the host,
the reader will be ready to read the next card or accept manual entry of card
data for a card-not-present transaction.
Manual Card Entry
When a card is not present or unreadable, DynaPAD allows the operator to
manually enter the card data using the keypad and display. In this scenario,
the Primary Account Number (PAN, 12-19 digits), Expiration Date (MMYY, 4
digits) and optional CVV2 (3-4 digits) are TDEA (Triple Data Encryption
Algorithm, aka, Triple DES) encrypted using DUKPT (Derived Unique Key Per
Transaction) key management. The output of the manually entered card
data is similar to the output of a swiped card, but the Format Code on Track
1 is represented as an “M” instead of a “B”. This method allows the operator
to keep sensitive card data from entering a general purpose computing
device where it can be more easily compromised.
Technical Support
When contacting the support team please have your reader charged and
have the part number and serial number(s) available.
Call 651.415.6800 or email: [email protected]
Compliance
FCC WARNING STATEMENT
This equipment has been tested and was found to comply with the limits for a Class A digital device
pursuant to Part 15 of FCC Rules. These limits are designed to provide reasonable protection against
harmful interference when the equipment is operated in a commercial environment. This equipment
generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance
with the instruction manual, may cause harmful interference with radio communications. Operation of
this equipment in a residential area is likely to cause harmful interference in which case the user will
be required to correct the interference at his own expense.
FCC COMPLIANCE STATEMENT
This device complies with Part 15 of the FCC Rules. Operation of this device is subject to the following
two conditions: (1) this device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesired operation.
CANADIAN DOC STATEMENT
This digital apparatus does not exceed the Class A limits for radio noise from digital apparatus set out
in the Radio Interference Regulations of the Canadian Department of Communications.
Le présent appareil numérique n’émet pas de bruits radioélectriques dépassant les limites
applicables aux appareils numériques de la classe A prescrites dans le Réglement sur le brouillage
radioélectrique édicté par le ministère des Communications du Canada.
This Class A digital apparatus complies with Canadian ICES-003.
Cet appareil numériqué de la classe A est conformé à la norme NMB-003 du Canada.
CE STANDARDS
Testing for compliance with CE requirements was performed by an independent laboratory. The unit
under test was found compliant with standards established for Class A devices.
UL/CSA
This product is recognized per Underwriter Laboratories and Canadian Underwriter Laboratories
1950.
RoHS STATEMENT
When ordered as RoHS compliant, this product meets the Electrical and Electronic Equipment (EEE)
Reduction of Hazardous Substances (RoHS) European Directive 2002/95/EC. The marking is clearly
recognizable, either as written words like “Pb-free”, “lead-free”, or as another clear symbol ( ).
Use and Compliance
Please note that the use of this accessory with an Apple product may affect wireless performance. Apple®, Apple Pay®, OS X®, iPhone®, iPad®, iPad Air®, iPad Pro®, Lightning®, and Mac® are trademarks of Apple Inc., registered in the U.S. and other countries.
EMV® is a registered trademark in the U.S. and other countries and an unregistered trademark elsewhere. The EMV trademark is owned by EMVCo, LLC. The Contactless Indicator mark, consisting of four graduating arcs, is a trademark owned by and used with
permission of EMVCo, LLC. MagTek®, MagnePrint®, and MagneSafe® are registered trademarks of MagTek, Inc.
MAGTEK: Registered to ISO 9001:2015 © Copyright 2021 MagTek, Inc. PN D99800083 rev 40 4/21
MagTek
®
Inc., 1710 Apollo Court, Seal Beach CA 90740 | p 562-546-6400 | support 651-415-6800 | f 562-546-6301 | www.magtek.com
Pb
DynaPAD - PN 21087008 - Secure Card Reader Authenticator with Encrypting Key pad
  • Page 1 1
  • Page 2 2

Magtek DynaPAD Quick Installation Guide

Taper
Quick Installation Guide

dans d''autres langues