Magtek DynaPro Mini Quick Installation Guide
- Taper
- Quick Installation Guide
DynaPro Mini
Wireless/USB PIN-Entry Device with
Secure Card Reader Authenticator
Quick Installation Guide
www.magtek.com
MagTek’s DynaPro Mini is a handheld device that combines a secure PCI PTS
3.x, SRED compliant PIN Entry Device with a MagneSafe® secure card reader
authenticator (SCRA) and a smart card reader. This versatile secure cryptographic
device (SCD) is ideal for credit, ATM, Prepaid, gift, and debit cards for mobile point of
sale applications where you need unmatched convenience and security. Reduce your
interchange rates, reduce chargebacks and increase your customer satisfaction and
sales with the DynaPro Mini.
Product Description
with micro USB connection
MAGTEK RECOMMENDS
CHARGING AT LEAST EVERY
6 MONTHS TO MAXIMIZE
OPERATION. PLACE IN
AIRPLANE MODE BEFORE
STORAGE.
STORAGE TEMPERATURE:
32°F TO 113°F (0°C TO 45°C)
Diagrams
MagneSafe™ secure card reader authenticator (SCRA)
2-line liquid crystal display (LCD)
Cancel key
EMV secure card reader
Correction key
Enter key
Visually impaired reference bump
micro-USB port
Figure 1. 3/4 angle front face view
Figure 2. top angle view
Scroll up
Scroll down
Power button
Plug the micro-USB connection end of the cable into the DynaPro Mini’s micro-USB
port, then attached the USB connection to your device’s USB port (CPU or tablet).
Windows devices will automatically detect the DynaPro Mini device.
USB Connection
Additional Contents
www.magtek.com
MICRO USB B PLUG
CON 1 CON 2
micro-USB connection
USB connection
tablet with USB port PC with USB port
Figure 3. DynaPro Mini
micro-USB cable plug
The device is powered by the internal battery, and charges from the USB port. If there
is not sucient power on the USB to power the device, it will drain the internal battery
until such time as it shuts down. On the other hand, if power is available on the USB,
and the internal battery is in need of recharge, the device will draw signicantly more
current than it actually needs to operate until the battery is charged.
• To turn device ON and out of airplane mode: Plug in the USB cable or hit the power
button once and release it.
• To turn device OFF: Unplug the USB cable.
• To turn device OFF and into airplane mode (wireless not advertising): Unplug the
USB cable and then hold the power button for more than 7 seconds.
Power
Wireless Connection
When DynaPro Mini is connected wirelessly, the device will act as a server/peripheral,
and the host will act as a client/central. The custom software wraps commands in simple
Get/Set wrappers, and should use whatever wireless library is appropriate for the chosen
software development framework.
Compliance
FCC WARNING STATEMENT: This equipment has been tested and was found to comply with the limits for a Class B digital device pursuant to Part 15 of FCC Rules. These limits are designed to
provide reasonable protection against harmful interference when the equipment is operated in a residential environment. This equipment generates, uses, and can radiate radio frequency energy
and, if not installed and used in accordance with the instruction manual, may cause harmful interference with radio communications. However, there is no guarantee that interference will not occur
in a particular installation.
FCC COMPLIANCE STATEMENT: This device complies with Part 15 of the FCC Rules. Operation of this device is subject to the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
CANADIAN DOC STATEMENT: This digital apparatus does not exceed the Class B limits for radio noise from digital apparatus set out in the Radio Interference Regulations of the Canadian
Department of Communications.
Le présent appareil numérique n’émet pas de bruits radioélectriques dépassant les limites applicables aux appareils numériques de la classe B prescrites dans le Réglement sur le brouillage
radioélectrique édicté par le ministère des Communications du Canada.
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numériqué de la classe B est conformé à la norme NMB-003 du Canada.
CE STANDARDS: Testing for compliance with CE requirements was performed by an independent laboratory.
The unit under test was found compliant with standards established for Class B devices.
UL/CSA: This product is recognized per Underwriter Laboratories and Canadian Underwriter Laboratories 1950.
RoHS STATEMENT: When ordered as RoHS compliant, this product meets the Electrical and Electronic Equipment (EEE) Reduction of Hazardous Substances (RoHS) European Directive 2002/95/
EC. The marking is clearly recognizable, either as written words like “Pb-free”, “lead-free”, or as another clear symbol ( ).
Pb
Registered to ISO 9008:2015 © Copyright 2020 MagTek, Inc. PN D99875618 rev 70 5/20
MagTek ® Inc., 1710 Apollo Court, Seal Beach CA 90740 p 562-546-6400 | f 562-546-6301 | www.magtek.com
Subjecting the unit to temperature extremes can adversely aect the unit’s battery
life and tamper security switches, which can render the unit inoperable and void the
warranty. Temperature requirements: 32°F to 113°F (0°C to 45°C).
PCI Information
PCI SSC’s approval applies only to PEDs that are identical to the PED tested by a PCI Security Standards Council recognized
laboratory. If any aspect of the PED is dierent from that which was tested by the laboratory—even if the PED conforms to the basic
product description contained in the letter—then the PED model should not be considered approved, nor promoted as approved.
For example, if a PED contains rmware, software, or physical construction that has the same name or model number as those
tested by the laboratory, but in fact is not identical to those PED samples tested by the laboratory, then the PED should not be
considered or promoted as approved.
No vendor or third party may refer to a PED as “PCI Approved,” nor otherwise state or imply that PCI SSC has, in whole or part,
approved any aspect of a vendor or its PEDs, except to the extent and subject to the terms and restrictions expressly set forth
in a written agreement with PCI SSC, or in an approval letter. All other references to PCI SSC’s approval are strictly and actively
prohibited by PCI SSC.
When granted, an approval is provided by PCI SSC to ensure certain security and operational characteristics important to the
achievement of PCI SSC’s goals, but the approval does not under any circumstances include any endorsement or warranty
regarding the functionality, quality, or performance of any particular product or service. PCI SSC does not warrant any products or
services provided by third parties. Approval does not, under any circumstances, include or imply any product warranties from PCI
SSC, including, without limitation, any implied warranties of merchantability, tness for purpose or noninfringement, all of which are
expressly disclaimed by PCI SSC. All rights and remedies regarding products and services, which have received an approval, shall
be provided by the third party providing such products or services, and not by PCI SSC or the payment brand participants.
Technical Support
When calling the support team please have your reader charged and have the part
number and serial number(s) available.
support@magtek.com
651.415.6800
-
1
-
2
-
3
-
4
Magtek DynaPro Mini Quick Installation Guide
- Taper
- Quick Installation Guide
dans d''autres langues
- English: Magtek DynaPro Mini
Documents connexes
-
Magtek DynaPro Go Manuel utilisateur
-
Magtek DynaMAX Quick Installation Guide
-
Magtek DynaFlex Kiosk Family Quick Installation Guide
-
-
Magtek Rails Technical Reference Manual
-
-
-
-
Magtek Dynamag Quick Installation Guide
-
Magtek iDynamo Manuel utilisateur