ONKYO NS-6170 Manuel utilisateur

English

Français

Español

Italiano Deutsch Nederlands

Language select / Sélection de la langue / Selección de idioma / Selezione lingua / Sprachauswahl / Taal selecteren / Välj språk

NS-6170

Svenska

E

N

Before Start

What's in the box .................................................................... 2

Part Names

Front Panel ............................................................................. 3

Rear Panel .............................................................................. 4

Remote Controller .................................................................. 5

Display .................................................................................... 6

Install

Connections with an amplifier ................................................. 7

Connecting the antenna/power cord, etc. ............................... 9

Initial Setup

Power On & Initial Setup ...................................................... 10

Playback

USB Storage Device/HDD .................................................... 12

Internet Radio ....................................................................... 14

Spotify ................................................................................... 15

Listening to the FM Radio ..................................................... 16

Listening to DAB Digital Radio ............................................. 18

AirPlay

®

................................................................................ 19

Music Server ......................................................................... 20

Entering text ......................................................................... 22

Supplementary information

Supplementary information for player functions .................... 23

Advanced Setup

Advanced Settings................................................................. 24

Firmware Update .................................................................. 28

Others

Troubleshooting .................................................................... 30

General Specifications .......................................................... 32

License and Trademark Information ..................................... 33

> Before Start > Part Names > Install > Initial Setup > Playback

Supplementary information | Advanced Setup | Others

NETWORK AUDIO PLAYER

NS-6170

Instruction

Manual

2

> Before Start > Part Names > Install > Initial Setup > Playback

Supplementary information | Advanced Setup | Others

E

N

What's in the box

Before Start

0 The power cord must be connected only after all other cable connections are completed.

0 We will not accept responsibility for damage arising from the connection of equipment

manufactured by other companies.

0 Functionality may be introduced by firmware updates and service providers may cease

services, meaning that some network services and content may become unavailable in

the future.

0 Specifications and appearance are subject to change without prior notice.

Main unit (1)

Remote controller (RC-943E) (1), Batteries (AAA/R03) (2)

DAB/FM wire antenna (1)

Analog audio cable (1)

RI cable (1)

Power cord (1)

> Before Start >Part Names > Install > Initial Setup > Playback

Supplementary information | Advanced Setup | Others

3

E

N

Front Panel

Part Names

1. ÍON/STANDBY button: Turns the unit on or to standby mode.

2. Remote control sensor

3. Display (P6)

4. Play button:

∫

: This button stops playback.

1

/; : Play or pause play.

5. MENU/ENTER dial (

:/9)

When playing, turn left or right to select the folder or file, then press to confirm.

Press and hold to show the settings screen. While the menu is displayed, turn the dial to

select items and press to confirm the settings.

0 Depending on the input, the operation may not start.

6. USB

port: Connect a USB storage device or HDD (hard disk drive) to play music files. You can

also supply power (maximum 5 V/0.5 A) to USB devices with a USB cable.

0 When connecting a HDD that requires more than 5 V/0.5 A, connect to the USB port

(maximum 5 V/1 A) on the rear of the unit.

7. DISPLAY button: Switches the information on the display.

8. INPUT button: Switches the input to be played.

9. RETURN button: Returns to the previous screen.

  

 

4

> Before Start >Part Names > Install > Initial Setup > Playback

Supplementary information | Advanced Setup | Others

E

N

Rear Panel

1. AC INLET: Connect the supplied power cord.

2. Wireless antenna: Used for Wi-Fi connection. Adjust their angles according to the

connection status.

3. AUDIO OUTPUT DIGITAL OPTICAL jack: Connect a pre-main amplifier with digital optical

cable.

4. AUDIO OUTPUT DIGITAL COAXIAL jack: Connect a pre-main amplifier with digital

coaxial cable.

5. ETHERNET jack: Connect to the network with an ethernet cable.

6. USB port: Connect a USB storage device or HDD (hard disk drive) to play music files. You

can also supply power (maximum 5 V/1 A) to USB devices with a USB cable.

7. AUDIO OUTPUT ANALOG jacks: Connect a pre-main amplifier with the included analog

audio cable.

8. REMOTE CONTROL jack: Connect an Onkyo product with an RI jack using the

included RI cable to synchronized with this unit. (P8)

9. ANTENNA DAB/FM jack: Connect the included DAB/FM wire antenna.



  



180°

90°

> Before Start >Part Names > Install > Initial Setup > Playback

Supplementary information | Advanced Setup | Others

5

E

N

Remote Controller

1. Í button: Turns the unit on or into standby mode.

2. DIMMER button: Switch the display off or adjust the brightness of the display in two steps.

3. INPUT SELECTOR buttons: Switches the input to be played.

4. Play buttons:

:: Move to the track before the one being played. (USB, Music Server)

Used to select stations that have been registered or to give names to stations. (FM)

/;: Play or pause play.

9: Move to the next track. (USB, Music Server)

Used to select stations that have been registered or to give names to stations. (FM)

22/11 : Used to select radio stations. (FM)

∫: Stop playback.

0 Depending on the input, the operation may not start.

5. REPEAT button: Set repeat play.

SHUFFLE button: Set shuffle play.

6. CLEAR button: Used when entering text, etc

7. TOP MENU button: Move to the top menu of the selected input.

8. Cursors, ENTER button: Select the item with the cursors and press ENTER to confirm.

9. SETUP button: Displays the setup menu.

10.

Amplifier control buttons

Use to switch the input, adjust the volume, etc., of an Onkyo pre-main amplifier.

0 Operation may not be possible with some amplifiers.

11.

TUNING MODE button: Switches tuning to an FM station between automatic tuning and

manual tuning.

12.

Í AMP button: Switch an Onkyo pre-main amplifier between on and standby.

0 Operation may not be possible with some

amplifiers.

13.

DISPLAY button: Switches the information on

the display.

14.

MEMORY button: Used to register FM radio

stations.

15.

NOW PLAYING button: When you have

changed the display during play, for example,

this button returns the display to show

information about the file being played.

16.

button: Returns the display to the previous

state.

17.

PS/RT/PTY button: Can be used when

receiving the station transmitting text information.



































30°

Approx. 5 m

6

> Before Start >Part Names > Install > Initial Setup > Playback

Supplementary information | Advanced Setup | Others

E

N

Display

1. ASb: Lights when "Auto Standby" (P25) is set to "On".

2. DSD: Lights when the audio signal being input is DSD.

3. Lights when remote controller cursor operations are possible.

4. Displays the play status.

5. Lights when automatic tuning is selected as the method for tuning radio stations.

6. Lights when FM stereo is being received.

7. Lights when tuned into a radio station.

8. DIMMER indicator: Lights when you have pressed DIMMER to turn the display off.

9. Message display: Displays information about tracks and menus.

0 Characters that cannot be displayed on this unit are replaced with asterisks (

).

0 The following icons are displayed.

: Folder

: Track title

: Playing

: Paused

: Artist

: Album

: 1-track repeat

: Repeat within a folder

: Shuffle

0 When DIMMER is pressed to turn off the display, the unit may appear the same as if you

had unplugged the unit from the power outlet, but electricity is still being supplied to the

unit. To completely cut the unit off from the power supply, you need to unplug the power

plug (shutoff device) unit from the power outlet.

ASb DSD

AUTO FM ST







7

E

N

> Before Start > Part Names >Install > Initial Setup > Playback

Supplementary information | Advanced Setup | Others

Connections with an amplifier

Install

a

1

2

You can play the audio from network features such as

internet radio through speaker systems connected to pre-

main amplifiers or AV receivers. Connect to suit the input

jacks on your amplifier.

Connecting with an analog audio cable

The signal is converted to analog in the D/A converter of

this unit and then output to the pre-main amplifier. Connect

the LINE IN jacks on a pre-main amplifier with the included

analog audio cable to the AUDIO OUTPUT ANALOG jack

on this unit.

Connecting with a digital optical cable

The signal is converted to analog in the D/A converter of

the pre-main amplifier. Connect the OPTICAL IN jacks on a

pre-main amplifier with a digital optical cable to the AUDIO

OUTPUT DIGITAL OPTICAL jack on this unit.

NS-6170

a

1

2

Integrated amplifier, AV receiver, etc.

a Analog audio cable

8

> Before Start > Part Names >Install > Initial Setup > Playback

Supplementary information | Advanced Setup | Others

E

N

Connecting with a digital coaxial cable

The signal is converted to analog in the D/A converter of the

pre-main amplifier. Connect the COAXIAL IN jacks on a

pre-main amplifier with a digital coaxial cable to the AUDIO

OUTPUT DIGITAL COAXIAL jack on this unit.

Connecting with Onkyo RI Components

By connecting an Onkyo component with RI jack to the unit

by using an optional RI cable and an analog audio cable,

you can link the unit's power and input selection and enable

operation with this unit's remote controller. For details, refer

to the instruction manual of the component with the RI jack.

0 Some components may not support all RI functions.

a

Amplifier

NS-6170

a RI cable

9

> Before Start > Part Names >Install > Initial Setup > Playback

Supplementary information | Advanced Setup | Others

E

N

Connecting the antenna/power cord, etc.

a

1

b

2 3

Antenna Hookup

Move the antenna around while playing the radio to find the

position with the best reception.

Power cord connection

This model includes a removable power cord.

The power cord must be connected only after all other

connections are completed. Make sure you first connect the

power cord to AC INLET terminal of the unit and then

connect to the outlet. Always disconnect the outlet side first

when disconnecting the power cord.

Ethernet cable connection

To connect to the network with an ethernet cable, use the

ETHERNET jack. When using Wi-Fi connection, make

settings in initial settings (P10). You can enjoy features

such as internet radio and AirPlay by connecting to the

network.

a DAB/FM wire antenna, b Power cord

10

> Before Start > Part Names > Install > Initial Setup >Playback

Supplementary information | Advanced Setup | Others

E

N

Power On & Initial Setup

Initial Setu p

Network Setup

1 2

Starting up: When you press Í, "Now Initializing..." is

displayed on the display. After this, when "Now Initializing..."

goes out, you can start operating the unit.

Wi-Fi connection settings

When you first turn the power on, the Network Setup screen

is displayed automatically, allowing you to easily make Wi-Fi

connection settings.

To set, select the item with the cursors on the remote

controller and press ENTER to confirm.

0 To return to the previous display, press .

0 Turn MENU/ENTER on the main unit to the left and right

to select the item, then press the dial to confirm.

1. Press ENTER when "Network Setup" is displayed.

2. To make Wi-Fi settings, select "Wi-Fi". If you have

connected with an ethernet cable, select "Wired(Exit)"

with / on the remote controller and press ENTER.

3. If you selected "Wi-Fi", select the setting method with /

Network Setup

Wi-Fi

Wired ( Exit )

11

> Before Start > Part Names > Install > Initial Setup >Playback

Supplementary information | Advanced Setup | Others

E

N

on the remote controller and press ENTER.

0 To redo the initial settings, press SETUP on the remote

controller, select "Wi-Fi" in "Network" - "Connection",

then select "Wi-Fi Setup".

∫ iOS device

Set by sharing the iOS device's Wi-Fi settings with this unit.

1. Connect the iOS device by Wi-Fi.

2. Select this device in the "SET UP NEW AIRPLAY

SPEAKER..." item on the screen of the iOS device and

select "Next".

0 This unit is displayed as "Onkyo NS-6170 XXXXXX".

3. After "Check Network" is displayed on this unit, when the

Wi-Fi settings are complete, the display changes. Select

"Done" on the screen of the iOS device.

∫ Scan Networks

From the list of SSID for access points such as wireless

LAN routers, select the required SSID and make the

settings.

1. Select the SSID of the access point you want to connect

with / on the remote controller and press ENTER.

2. Select "Password" or "Push Button" with / on the

remote controller and press ENTER. If the access point

has an automatic connection button, by selecting "Push

Button" you can connect without entering a password.

3. If you select "Password", enter the password of the

access point. For details on how to enter text, refer to

"Entering text" (P22).

If you select "Push Button", then after pressing and

holding the automatic setting button on the access point

for the required amount of time, press ENTER on the

remote controller.

4. After "Check Network" is displayed, the information of the

display switches when the Wi-Fi settings are complete.

0 If "Retry" appears on the display, press ENTER to retry

the settings.

∫ Enter SSID of the access point

Set by entering the SSID of the access point you want to

connect.

1. Enter the SSID. For details on how to enter text, refer to

"Entering text" (P22).

2. Select the authentication method with / on the

remote controller and press ENTER.

0 If you select "None", proceed to step 3. If you select

"WEP", "WPA", or "WPA2", enter the password and

confirm.

3. After "Check Network" is displayed, the information of the

display switches when the Wi-Fi settings are complete.

0 If "Retry" appears on the display, press ENTER to retry

the settings.

iOS device

Scan Networks

Input SSID

My SSID

Password

Push Button

WPA2

WPA

WEP

None

12

> Before Start > Part Names > Install > Initial Setup >Playback

Supplementary information | Advanced Setup | Others

E

N

USB Storage Device/HDD

Playback

b

2

1

d

e

f

a

c

Basic operations

You can play music files by connecting a USB storage

device or HDD (hard disk drive) to the USB port on the front

or rear of the unit.

0 The USB port on the front supports a maximum 5 V/0.5 A

power supply. If the HDD requires more than this,

connect to the USB port (maximum 5 V/1 A) on the rear

of the unit.

1. Turn the unit on.

2. Press USB to select "USB (F)" (USB port on the front

panel) or "USB (R)" (USB port on the rear panel).

3. Plug your USB storage device or HDD into the USB port

on the front or rear.

4. Press ENTER (e) after reading is complete.

5. Select the folder or music file with / (d) on the

remote controller and press ENTER (e) to confirm. To

return to the previous display, press (f).

6. Use play buttons (b) to stop play or choose tracks to play.

0 The display of album name and artist name is supported

with MP3/WMA/Apple Lossless/FLAC/AAC/DSD (DSF

only) format music files.

0 Characters that cannot be displayed by this unit appear

as "

¢

".

0 The USB port of this unit conforms with the USB 2.0

standard. The transfer speed may be insufficient for

some content you play, which may cause some

interruption in sound.

Repeat play

1. Repeatedly press REPEAT (a) during play to display

or on the display.

: Repeat play of the selected individual track.

: Repeat play of all tracks within a folder.

To cancel repeat play, press REPEAT (a) several times

USB ( F )

13

> Before Start > Part Names > Install > Initial Setup >Playback

Supplementary information | Advanced Setup | Others

E

N

until the icons disappear.

Shuffle play

1. Press SHUFFLE (c) during play to display on the

display.

: Play tracks in a folder randomly.

To cancel shuffle play, press SHUFFLE (c) until the icon

disappears.

USB Storage / HDD Device Requirements

0 Note that operation is not guaranteed with all USB

storage devices or HDD.

0 This unit can use USB storage devices that comply with

the USB mass storage device class standard. (However,

there are still devices that cannot be played by this unit

even if they comply with the USB mass storage class

standard.)

0 The unit is also compatible with USB storage devices

using the FAT16 or FAT32 file system formats. Other

formats such as exFAT, NTFS, and HFS cannot be

played by this unit.

0 If the USB storage device has been partitioned, each

section will be treated as an independent device.

0 Up to 20,000 tracks per folder can be displayed, and

folders may be nested up to 16 levels deep.

0 USB hubs and USB storage devices with hub functions

are not supported. Do not connect these devices to the

unit.

0 USB storage devices with security function are not

supported on this unit.

0 If the USB storage device or HDD comes with an AC

adapter, we recommend that you use its AC adapter to

power it.

0 Media inserted to the USB card reader may not be

available in this function. Furthermore, depending on the

USB storage device, proper reading of the contents may

not be possible.

0 We accept no responsibility whatsoever for the loss or

damage to data stored on a USB storage device when

that device is used with this unit. We recommend that you

back up your important music files beforehand.

Supported Audio Formats

For server playback and playback from a USB storage

device, this unit supports the following music file formats.

Note that sound files that are protected by copyright cannot

be played on this unit.

MP3 (.mp3/.MP3):

0 Supported formats: MPEG-1/MPEG-2 Audio Layer 3

0 Supported sampling rates: 44.1 kHz, 48 kHz

0 Supported bitrates: Between 8 kbps and 320 kbps and

VBR.

WMA (.wma/.WMA):

0 Supported sampling rates: 44.1 kHz, 48 kHz

0 Supported bitrates: Between 5 kbps and 320 kbps and

VBR.

0 WMA Pro/Voice/WMA Lossless formats are not

supported

WAV (.wav/.WAV):

WAV files include uncompressed PCM digital audio.

0 Supported sampling rates: 44.1 kHz, 48 kHz, 88.2 kHz,

96 kHz, 176.4 kHz, 192 kHz

0 Quantization bit: 8 bit, 16 bit, 24 bit

AIFF (.aiff/.aif/.aifc/.afc/.AIFF/.AIF/.AIFC/.AFC):

AIFF files include uncompressed PCM digital audio.

0 Supported sampling rates: 44.1 kHz, 48 kHz, 88.2 kHz,

96 kHz, 176.4 kHz, 192 kHz

0 Quantization bit: 8 bit, 16 bit, 24 bit

AAC (.aac/.m4a/.mp4/.3gp/.3g2/.AAC/.M4A/.MP4/.3GP/

.3G2):

0 Supported formats: MPEG-2/MPEG-4 Audio

0 Supported sampling rates: 44.1 kHz, 48 kHz, 88.2 kHz,

96 kHz

0 Supported bitrates: Between 8 kbps and 320 kbps and

VBR.

FLAC (.flac/.FLAC):

0 Supported sampling rates: 44.1 kHz, 48 kHz, 88.2 kHz,

96 kHz, 176.4 kHz, 192 kHz

0 Quantization bit: 8 bit, 16 bit, 24 bit

Apple Lossless (.m4a/.mp4/.M4A/.MP4):

0 Supported sampling rates: 44.1 kHz, 48 kHz, 88.2 kHz,

96 kHz, 176.4 kHz, 192 kHz

0 Quantization bit: 16 bit, 24 bit

DSD (.dsf/.dff/.DSF/.DFF):

0 Supported formats: DSF/DSDIFF

0 Supported sampling rates: 2.8 MHz, 5.6 MHz, 11.2 MHz

14

> Before Start > Part Names > Install > Initial Setup >Playback

Supplementary information | Advanced Setup | Others

E

N

Internet Radio

Basic operations

When this unit is connected to a network, you can listen to

TuneIn or other preregistered Internet radio services.

Depending on the internet radio service, the user may need

to register from their computer first.

1. Turn the unit on.

2. Press NETWORK.

3. Select "TuneIn Radio", etc., with / (a) of the remote

controller and press ENTER (b) to confirm.

0 If "Connection Error." is displayed, check whether the

network is properly connected.

4. Select the station, etc., with / (a) on the remote

controller and press ENTER

(b)

. To return to the previous

display, press (c).

TuneIn

You can register a station you have played as a favorite.

1. Press ENTER (b) while playing TuneIn.

2. Select "Add to My Presets" with / (a) on the remote

controller and press ENTER

(b)

.

3. To play a favorite, select a registered station in "My

Presets", displayed first when "TuneIn Radio" selected

and press ENTER

(b)

. To delete favorites, press ENTER

(b) during play,

select "Remove from My Presets" and

press ENTER

(b)

.

b

a

c

1

Spotify

TuneIn Radio

Deezer

TIDAL

15

> Before Start > Part Names > Install > Initial Setup >Playback

Supplementary information | Advanced Setup | Others

E

N

Spotify

Spoti fy

b

a

c

d

e

1

4

3

2

Basic Operation

Spotify Connect play is possible by connecting this unit to

the same network as a smartphone or tablet. To enable

Spotify Connect, install the Spotify application on your

smartphone or tablet and create a Spotify premium account.

1. Connect the smartphone to the network that this unit is

connected to.

2. Click the Connect icon in the track play screen of the

Spotify app.

3. Select this unit.

0 This unit is displayed as "Onkyo NS-6170 XXXXXX".

4. This unit turns on automatically and the input selector

changes to NET and streaming of Spotify starts.

0 If "Option" - "PWR Setting" - "NET Stby" is set to "Off"

in the setup menu, manually turn the unit on and then

press NETWORK on the remote controller.

0 Refer to the following for Spotify settings:

www.spotify.com/connect/

The Spotify software is subject to third party licenses

found here:

www.spotify.com/connect/third-party-licenses

The following remote controller operations are also

possible.

(a) This button plays the previous track.

(b) Pressed during play this button pauses playback.

Pressed while paused, and it restarts play.

(c) This button plays the next track.

(d) Start repeat play.

(e) Start shuffle play.

16

> Before Start > Part Names > Install > Initial Setup >Playback

Supplementary information | Advanced Setup | Others

E

N

Listening to the FM Radio

1

a

b

d

c

e

i

f

g

h

Tuning Automatically

1. Turn the unit on.

2. Repeatedly press TUNER to switch input to FM.

3. When you press 22/11 (b) on the remote controller,

automatic tuning starts, and searching stops when a

station is found. "FM ST" indicator on the display lights

when FM stereo station is being received.

When FM broadcasts are difficult to receive : Perform the

procedure for "Tuning Manually". If you tune manually, the

reception for FM broadcasts will be monaural rather than

stereo, irrespective of the sensitivity of the reception.

Tuning Manually

1. Turn the unit on.

2. Repeatedly press TUNER to switch input to FM.

3. Press TUNING MODE (h) on the remote controller or

MENU/ENTER dial on the main unit so that the "AUTO"

indicator on the display goes off.

4. Select the station you want to listen to while pressing

22/11 (b) on the remote controller.

0 The frequency changes by 1 step each time you press

the button. The frequency changes continuously if the

button is held down and stops when the button is

released. Tune by looking at the display.

Registering a station

You can register a maximum of 40 stations.

1. Tune into the radio station you want to register.

2. Press MEMORY (d) on the remote controller so that the

preset number on the display flashes.

FM 87 . 50MHz

FM 87 . 50MHz 1

17

> Before Start > Part Names > Install > Initial Setup >Playback

Supplementary information | Advanced Setup | Others

E

N

3. While the preset number is flashing (about 8 seconds),

repeatedly press :/9 (a) on the remote controller

to select a number between 1 and 40.

4. Press MEMORY (d) on the remote controller again to

register the station. When registered, the preset number

stops flashing.

Selecting registered stations

1. Repeatedly press TUNER to switch input to FM.

2. Press :/9 (a) on the remote controller to select a

preset number.

To delete a registered station

1. Repeatedly press TUNER to switch input to FM.

2. Press :/9 (a) on the remote controller to select the

preset number you want to delete.

3. Press CLEAR (c) on the remote controller to delete the

preset number.

To give a name to a registered station

1. Repeatedly press TUNER to switch input to FM.

2. Press :/9 (a) on the remote controller to select a

preset number.

3. Press SETUP (f) on the remote controller.

4. Press / (e) on the remote controller to select

"Option" - "Tuner Setting" - "NameEdit" and press

ENTER (i).

5. Enter a name for the station. For details on how to enter

text, refer to "Entering text" (P22).

Using RDS

RDS stands for Radio Data System and is a method of

transmitting data in FM radio signals. In regions using RDS,

the radio station name is displayed when you tune into a

radio station broadcasting program information. When you

press PS/RT/PTY (g) on the remote controller in this state,

you can use the following functions.

Displaying text information (Radio Text)

1. While the name of the station is being displayed on the

display, press PS/RT/PTY (g) on the remote controller

once.

Radio Text (RT) broadcast by the station is displayed

scrolling across the display. "No Text Data" is displayed

when no text information is available.

0 Unusual characters may be displayed when the unit

receives unsupported characters. However, this is not a

malfunction. Also, if the signal from a station is weak,

information may not be displayed.

Search for stations by Program Type

1. While the name of the station is being displayed on the

display, press PS/RT/PTY (g) on the remote controller

twice.

2. Press :/9 (a) on the remote controller to select the

Program Type you want to find, then press ENTER (i) to

start the search.

The Program Types displayed are as follows:

None

News (News reports)

Current affairs

Information

Sport

Education

Drama

Cultures

Science (Science and technology)

Varied speech

Pop music

Rock music

Easy listening

Light classics m

Serious classics

Other music

Weather & metr

Finance

Children's progs (Children's programmes)

Social affairs

Religion

Phone in

Travel & touring

Leisure & hobby

Jazz music

Country music

Nation music

Oldies music

Folk music

Documentary

0 The information displayed may sometimes not match

the content being broadcast by the station.

3. When a station is found, "FINISH" is displayed and the

station flashes on the display. Press ENTER (i) while this

is happening to start receiving that station. If you don’t

press ENTER (i), the unit continues to search for another

station.

0 If no stations are found, the message "Not Found" is

displayed.

0 Unusual characters may be displayed when the unit

receives unsupported characters. However, this is not a

malfunction. Also, if the signal from a station is weak,

information may not be displayed.

18

> Before Start > Part Names > Install > Initial Setup >Playback

Supplementary information | Advanced Setup | Others

E

N

Listening to DAB Digital Radio

Tuning

1. Turn the unit on.

2. Repeatedly press TUNER to switch input to DAB.

0 The very first time you select DAB, the Auto Tuning

function automatically scans the DAB Band 3 for the

multiplexes (i.e., stations) available in your area.

0 Once the scanning process is complete, the first

station that was detected is selected.

0 If a new DAB station is introduced, or you move to a

new area, press SETUP (c) on the remote controller,

then use "DAB Scan" in "Option" - "Tuner Setting".

3. Select the desired radio station with the cursors (b) on

the remote controller.

Changing the order stations are displayed

You can sort the abailable stations alphabetically or by

multiplex.

1. Press TUNING MODE (d) repeatedly to set the method

for sorting the display order from the following.

Alphabet (default setting) : Sort stations alphabetically.

Multiplex : Sort stations by multiplex.

Displaying DAB Radio Information

1. Press the DISPLAY button (a) repeatedly to display more

information about the selected DAB station.

DLS (Dynamic Label Segment) : When tuned to a

station that's broadcasting DLS text data, the text will

scroll across the display.

Program Type : Displays the type of program.

Bit Rate and Audio Mode : Displays the station's bit rate

and audio mode (Stereo, Mono).

Quality : Displays the signal quality.

0 - 59: Poor reception

60 - 79: Good reception

80 - 100: Excellent reception

Multiplex Name : Displays the name of the current

multiplex.

Multiplex Number and Frequency : Displays the

number and frequency of the current multiplex.

1

a

b

c

d

DAB

Scan: 100%

Broadcast Information

19

> Before Start > Part Names > Install > Initial Setup >Playback

Supplementary information | Advanced Setup | Others

E

N

AirPlay

®

1 3

2

4

Basic Operation

You can wirelessly enjoy the music files on an iPhone

®

,

iPod touch

®

, or iPad

®

connected to the same access point

as this unit. Update the OS version on your iOS device to

the latest version.

1. Turn the unit on.

2. Connect the iOS device to the same network as this unit.

3. Tap the AirPlay icon in the control center of the iOS

device and select this unit from the list of devices

displayed, and tap "Done".

0 This unit is displayed as "Onkyo NS-6170 XXXXXX".

0 If an "AirPlay PW" has been set on this unit, enter the

password you set.

4. Play the music files on the iOS device.

0 In the setup menu displayed by pressing SETUP on the

remote controller, when "Option" - "PWR Setting" - "NET

Stby" is set to "On", when play of AirPlay starts, this unit

turns on automatically and play starts.

0 Due to the characteristics of AirPlay wireless technology,

the sound produced on this unit may slightly be behind

the sound played on the AirPlay-enabled device.

0 SHUFFLE or REPEAT on the remote controller does not

work. Operate from the iOS device.

You can also play the music files on a computer with iTunes

(Ver. 10.2.2 or later). Make sure this unit and the computer

are connected to the same network, click the AirPlay icon

in iTunes, select this unit from the list of devices

displayed, and start play of a music file.

La page est en cours de chargement...

ONKYO NS-6170 Manuel utilisateur

ONKYO NS-6170 Manuel utilisateur

dans d''autres langues

Documents connexes

Autres documents