Hoover HOZP717IN/E Manuel utilisateur

Marque: Hoover

Modèle: HOZP717IN/E

Taper: Manuel utilisateur

USER INSTRUCTIONS

OVENS

NOTICE D'EMPLOI ET D'INSTALLATION

DES FOURS ENCASTRABLES

MANUALE D’ISTRUZIONI

FORNO

INSTRUCCIONES DE USO

HORNOS EMPOTRABLES

BEDIENUNGSANLEITUNG

BACKOFEN

KULLANIM KILAVUZU

FIRINLAR

• HOZP717IN/E

CANDY HOOVER GROUP S.R.L. • Via Comolli 16 • 20861 Brugherio (MB) - Italy

Safety Indications

• Do not use rough or abrasive materials or sharp metal scrapers to clean

the oven door glasses, as they can scratch the surface and cause the glass

to shatter.

• WARNING: in order to avoid any danger caused by the accidental

resetting of the thermal interruption device, the appliance should not be

connected to a circuit that is regularly switched on and off.

• During cooking, moisture may condense inside the oven cavity or on

the glass of the door. This is a normal condition. To reduce this effect, wait

10-15 minutes after turning on the power before putting food inside the

oven. ln any case, the condensation disappears when the oven reaches

the cooking temperature.

• Children should not play with the appliance.

• WARNING: ensure that the appliance is switched off before replacing

the bulb, to avoid the possibility of electric shocks.

• Avoid leaving food inside the oven after cooking for more than 15/20

minutes.

• Cleaning and maintenance should not be carried out by unsupervised

children.

• Children under 8 should be kept at a safe distance from the appliance if

not continuously supervised.

• WARNING: the appliance and accessible parts become hot during use.

Be careful not to touch any hot parts.

• The appliance can be used by those aged 8 or over and by those with

limited physical, sensorial or mental capacities, without experience or

knowledge of the product, only if supervised or provided with instruction

as to the operation of the appliance, in a safe way with awareness of the

possible risks.

• Cook the vegetables in a container with a lid instead of an open tray.

• The oven must be switched off before removing the removable parts.

After cleaning, reassemble them according the instructions.

• WARNING: the accessible parts can become hot when the grill is in use.

Children should be kept at a safe distance.

EN 02

EN 03

• Connect a plug to the supply cable that is able to bear the voltage,

current and load indicated on the tag and having the earth contact. The

socket must be suitable for the load indicated on the tag and must have

ground contact connected and in operation. The earth conductor is

yellow-green in colour. This operation should be carried out by a suitably

qualified professional. ln case of incompatibility between the socket and

the appliance plug, ask a qualified electrician to substitute the socket

with another suitable type. The plug and the socket must be conformed

to the current norms of the installation country. Connection to the power

source can also be made by placing an omnipolar breaker between the

appliance and the power source that can bear the maximum connected

load and that is in line with current legislation. The yellow-green earth

cable should not be interrupted by the breaker. The socket or omnipolar

breaker used for the connection should be easily accessible when the

appliance is installed.

• Failure to comply with the above can compromise the safety of the

appliance and invalidate the guarantee.

• Any excess of spilled material should be removed before cleaning.

• A long power supply failure during an occurring cooking phase may

cause a malfunction of the monitor. ln this case contact customer service.

• The disconnection may be achieved by having the plug accessible or by

incorporating a switch in the fixed wiring in accordance with the wiring

rules.

• Only use the meat probe recommended for this oven.

• lf the power cable is damaged, it should be substituted with a cable or

special bundle available from the manufacturer or by contacting the

customer service department. The type of power cable must be

H05V2V2-F. This operation should be carried out by a suitably qualified

professional. The earth conductor (yellow-green) must be approximately

10 mm longer than the other conductors. For any repairs, refer only to

the Customer Care Department and request the use of original spare

parts.

• Do not use a steam cleaner for cleaning operations.

EN 04

• The appliance must not be installed behind a decorative door in order

to avoid overheating.

• When you place the shelf inside, make sure that the stop is directed

upwards and in the back of the cavity. The shelf must be inserted

completely into the cavity.

• CAUTION: Do not refill the cavity bottom with water during cooking or

when the oven is hot.

• No additional operation/setting is required in order to operate the

appliance at the rated frequencies.

• WARNING: Do not line the oven walls with aluminium foil or single-use

protection available from stores. Aluminium foil or any other protection,

in direct contact with the hot enamel, risk melting and deteriorating the

enamel of the insides.

• WARNING: Never remove the oven door seal.

General Instructions

1.1 Safety indications

1.2 Electrical safety

1.3 Recommendations

1.4 Installation

1.5 Waste management

1.6 Conformity declaration

2.1 Overview

2.2 Accessories

2.3 First use

Product Description

3.1 Display description

3.2 Cooking modes

Use of the Oven

4.1 General notes on cleaning

4.2 Maintenance

• Removing and cleaning wire racks

• Removal of the oven window

• Removal and cleaning of the glass

door

• Changing the bulb

Oven Cleaning and Maintenance

5.1 F.A.Q.

Troubleshooting

Summary

EN 05

1. General Instructions

NOTE: the oven functions, properties and accessories cited in this manual will vary, depending on the

model youhave purchased.

We thank you for choosing one of our products. For the

best results with your oven, you should read this

manual carefully and retain it for future reference.

Before installing the oven, take note of the serial

number so that you can give it to customer service staff

if any repairs are required. Having removed the oven

from its packaging, check that it has not been damaged

during transportation. If you have doubts, do not use

the oven and refer to a qualified technician for advice.

Keep all of the packaging material (plastic bags,

polystyrene, nails) out of the reach of children. When

the oven is switched on for the first time, strong

smelling smoke can develop, which is caused by the glue on the insulation panels surrounding the oven

heating for the first time. This is absolutely normal and, if it occurs, you should wait for the smoke to

dissipate before putting food in the oven. The manufacturer accepts no responsibility in cases where

the instructionscontainedin this document are not observed.

1.1 Safety Indications

- do not pull on the powercable to disconnect the plug fromthe socket;

- do not touch the appliance with wet or damp hands or feet;

- in case of malfunction and/or poor operation,switch offthe appliance and do not tamper with it.

- in generalthe use of adaptors,multiple socketsand extension cables is not recommended;

The use of anyelectrical appliance implies the observance of some fundamental rules:

Only use the oven for its intended purpose, that is only for the cooking of foods; any other use, for

example as a heat source, is considered improper and therefore dangerous. The manufacturer cannot

be held responsiblefor anydamage resultingfrom improper, incorrector unreasonable usage.

1.2 Electrical Safety

Before connecting the oven to the powersupply, ask a qualified electrician to check the continuity of the

power supply's earth terminal. The manufacturer accepts no responsibility for any accidents or other

problems caused by failure to connect the oven to the earth terminal or by an earth connection that has

defective continuity.

- the settingof the disconnector.

The grounding wire connected to the oven's earth terminal must be connected to the earth terminal of

the powersupply.

CONNECTION

The oven is supplied with a power cable that should only be connected to an electrical supply with 220-

240 Vac power between the phases or between the phase and neutral. Before the oven is connected to

the electrical supply, it is important tocheck:

- powervoltageindicated on the gauge;

WARNING

ENSURE THAT AN ELECTRICIAN OR QUALIFIED TECHNICIAN MAKES THE ELECTRICAL CONNECTIONS.

The power supply to which the oven is connected must conform with the laws in force in the country of

installation. The manufacturer accepts no responsibility forany damage causedby the failureto observe

these instructions. The oven must be connected to an electrical supply with an earthed wall outlet or a

disconnector with multiple poles, depending on the laws in force in the country of installation. The

electrical supply should be protected with suitable fuses and the cables used must have a transverse

section thatcan ensure correctsupply to the oven.

EN 06

1.3 Recommendations

Do not line the oven walls with aluminium foilor single-use protection available from stores. Aluminium

foil or any other protection, in direct contact with the hot enamel, risks melting and deteriorating the

enamel of the insides. In order to prevent excessive dirtying of your oven and the resulting strong

smokey smells, we recommend not using the oven at very high temperature. It is better to extend the

cooking time and lower the temperature a little. In addition to the accessories supplied with the oven,

weadvise you only use dishes and baking moulds resistant to veryhigh temperatures.

Aftereach use of the oven, a minimum of cleaning will help keepthe oven perfectlyclean.

1.4 Installation

The manufacturers have no obligation to carry this out. If the assistance of the manufacturer is required

to rectify faults arising from incorrect installation, this assistance is not covered by the guarantee. The

installation instructions for professionally qualified personnel must be followed. Incorrect installation

may cause harm or injury to people, animals or belongings. The manufacturer cannot be held

responsiblefor such harm or injury.

The oven can be located high in a column or under a worktop. Before fixing, you must ensure good

ventilation in the oven space to allow proper circulation of the fresh air required for cooling and

protecting the internal parts. Make the openings specified on last pageaccording tothe type of fitting.

NOTE: as the oven could require maintenance work, it is advisable to keep another wall socket available

so that the oven can be connected to this if it is removed from the space in which it is installed. The

power cable must only be substituted by technical service staff or by technicians with equivalent

qualifications.

1.5 Waste management and environmental protection

SAVING AND RESPECTING THE ENVIRONMENT

- the WEEE should be taken to dedicated collection areas managed by the town council or a registered

company.

Where possible, avoid pre-heating the oven and always try to fill it. Open the oven door as infrequently

as possible, because heat from the cavity disperses every time it is opened. For a significant energy

saving, switch off the oven between 5 and 10 minutes before the planned end of the cooking time, and

use the residualheat that the oven continuesto generate. Keepthe seals clean and in order, to avoid any

heat dispersal outside of the cavity. If you have an electric contract with an hourly tariff, the "delayed

cooking" programme makes energy saving more simple, moving the cooking process to start at the

reducedtarifftime slot.

- the WEEE should not be treated as domestic waste;

This appliance is labelled in accordance with European Directive 2012/19/EU regarding

electric and electronic appliances (WEEE). The WEEE contain both polluting substances

(that can have a negative effect on the environment) and base elements (that can be

reused). It is important that the WEEE undergo specific treatments to correctly removeand

dispose of the pollutants and recover all the materials. Individuals can play an important

role in ensuring that the WEEE do not become an environmental problem; it is essential to

follow a few basic rules:

In many countries, domestic collections may be available for large WEEEs. When you buy a new

appliance, the old one can be returned to the vendor who must accept it free of charge as a one-off, as

long as the appliance is of an equivalenttype and has the same functions as the purchased appliance.

1.6 Declaration of compliance

• By placing the mark on the appliance, we are confirming compliance to all relevant European

safety, health and environmentalrequirementswhich are applicable in legislation for this product.

• Hereby, Candy Hoover Group Srl declares that the radio equipment is in compliance with Directive

2014/53/EU. The full text of the EU declaration of conformity is available at the following internet

address:www.candy-group.com.

EN 07

2. Product Description

2.1 Overview

1. Control panel

2. Shelf positions

(lateral wire grid if included)

3. Metal grill

4. Drip pan

5. Fan (behind the steel plate)

6. Oven door

2.2 Accessories (according to the model)

Drip pan

Collects the residuesthat drip during the cooking

of foodson the grills.

EN 08

Metal grill

Holds baking trays and plates.

It located at both sides of the oven cavity. It holds

metalgrills and drip pans.

Lateral wire grids

Grill pan set

The simple shelf can take mouldsand dishes.

The drip tray catches the juices from grilled foods. It is

only used with the Grill, Rotisserie, or Fan Assisted Grill ;

removeit from the oven forother cookingmethods.

Never use the drip tray as a roasting tray as this creates

smoke and fat will spatter your oven making it dirty.

The special profile of the shelves means they stay

horizontal even when pulled right out. There is no risk of

a dish sliding or spilling.

The tray holder shelf is especially good forgrilling things.

Use it with the drip tray.

The tray holder shelf is ideal for grilling. Use it in

conjunction with the drip tray. A handle is included to

assist in moving the both accessories safely. Do no leave

the handle inside the oven.

The trayholder

2.3 First Use

PRELIMINARYCLEANING

Clean the oven before using for the first time. Wipe over external surfaces with a damp soft cloth. Wash

all accessories and wipe inside the oven with a solution of hot water and washing up liquid. Set the

empty oven to the maximum temperature and leave on for about 1 hour, this will remove any lingering

smells of newness.

3. Use of the Oven

3.1 Display description

EN 09

Cooking

duration

Cooking

end Timer

Clock

set

Child

lock

WiFi

ON / OFF

EXTRA

The oven is switched on and off with this button.

If the oven is switched off, the display shows the clock. When

the oven is inactive, all the functions are available except the

cookingduration and end of cooking.

If the clock is not set, the oven does not work: the display

flashes, showing "12:00" and the only functioning key is

Extra.From the Extrakey, the followingfunctions can be set:

The display shows “00:00”

if no cooking duration has

been inserted, otherwise

the display shows the time

remaining.

Press EXTRA twice and set

the time using the “+” and

“-” keys, confirming by

pressing"SELECT".

NB: can only be set with an

activecookingprogramme.

When a cooking programme

terminates, the oven

switches off while the

display shows "END" (the

cooking programme icon

remains on) until the On/Off

button, the only functioning

key, is pressed. When a

cooking programme

terminates, an alarm will

sound.

When the cooking time has

finished, the oven

automatically switches off and

the alarm sounds for a few

seconds.

FUNCTION HOW TO DEACTIVATE WHAT IT DOES WHY IT IS NEEDED

END OF

COOKING

DURATION

SETTING

THE CLOCK

TIMER

HOW TO USE

Press EXTRA enough times

to illuminate the icon, set

the end of cooking time

using the “<” and “>” keys

and confirm by pressing

"SELECT".

Press EXTRA enough times

to illuminate the icon, set

the end of cooking time

using the “<” and “>” keys

and confirm by pressing

"SELECT".

The cooking duration is

automaticallycalculated.

NB: can only be set with an

activecookingprogramme.

•This function is also used for

cooking that can be scheduled

in advance.

•If a cooking programme is set,

by pressing the “<” and “>”

keys you can see and modify

the temperature set: atthe first

touch, the operating

temperature is shown while

another touch will allow you to

modify said temperature.

•If delayed cooking is set, the

oven switches off and the

display shows the current time

while the cooking programme,

cooking duration and end of

cookingiconsareilluminated.

•If a cooking programme is set,

it will be lost if the "F" key is

pressed.

To modify the end of

cooking before the set

time, press EXTRA enough

times to illuminate the

icon, regulate the end of

cooking time as required

using the “<” and “>” keys

and confirm by pressing

"SELECT".

To cancel the end of

cooking time, reset the

displayto“00:00”.

When a cooking

programme terminates, an

alarm will sound.

When a cooking

programme terminates,

the oven switches off while

the display shows "END"

(the cooking programme

icon remains on) until the

On/Off button, the only

functioning key,is pressed.

•This function is useful

when there are children in

the house.

•Press the EXTRA key

enough times to illuminate

the icon and then either

the“<”or“>”keyto

activate this function: the

display will show ON; to

confirmpressSELECT.

•Press the EXTRA key

enough times to illuminate

the icon and then either

the“<”or“>”keyto

deactivate this function:

the display will show OFF;

toconfirmpressSELECT.

only the "Extra" button, to

deactivate the function,

and "On/Off" button can

be used.

•If the function is active

•The alarm functions

regardless of whether the

ovenis switchedon.

•Switched on for the first

time, the display

illuminates and shows

"12:00".

•To modify the time, press

EXTRA enough times to

illuminate the icon and use

the “<” and “>” keys to set

the time, confirming it by

pressingSELECT.

•It allows you to set the

time that appears on the

display.

Press EXTRA enough times

to illuminate the icon and

use the “<” and “>” keys to

set the time, confirming by

pressingSELECT.

•The display shows

“00:00” if no time has been

inserted or the time

remaining if this has

alreadybeen set.

•To modify the timer, press

EXTRA enough times to

illuminate the icon,

regulate the cooking time

as required using the “<”

and “>” keys and confirm

by pressing"SELECT".

•This function activates an

alarm that sounds for a few

seconds when the set time

expires (this function does

not switchthe ovenoff).

You can select a time

between00:00 and 23:59.

• The timer functions

regardless of whether the

ovenis switchedon.

•To modify cooking before

the set time, press EXTRA

twice and regulate the

cooking time as required

using the “<” and “>” keys,

before pressing "SELECT"

once more.

•To cancel the cooking

duration, reset the display

to“00:00”.

CHILD

SAFETY

EN 10

LANGUAGE SETTING The language can be set when

the oven is switched off by pressing the Extra and Select

buttonssimultaneously and for3". The current language is

shown on the display and can be changed by pressing the

“<” or “>” keys, confirming it by pressing SELECT. Available

languages are: Italian, English, Frenchand German.

“HOT” ICON When a cooking programme finishes or when the oven switches off, if the oven is still

hot, the displayshows the currenttime alternatingwith the message “HOT” at 3" intervals.

SELECT Any selection must be confirmed. If not

confirmed within 15 seconds, the selection is cancelled.

By changing menu, any unconfirmedselection is lost.

- iconnot lit: Wi-Fi is off.

- : Wi-fi is on and the oven is only controllable via the app. It means that it is not possible to select cooking

functions, recipes and temperature from the display. Only the Wi-Fi menu is available by pressing "Extra". You

can switch the oven off using the On/Off button, but you cannot switch it back on again via the display, it can

only be switched on via the app.

- : Wi-Fi is off; the oven is not controllablevia the app.Off

To enroll the appliance for Wi-Fi, press "Extra" on the display until the Wi-Fi icon lights, then select "Reset" by

pressing "< >". The procedure on the app should then be followed. Once selected, the appliance gives you 5

minutesto completethe enrolment process.

- The icon blinks 3 seconds on and 1 second off:the ovenis trying to connect to your Wi-Fi router.

-:Reset This setting should be used to enrol the oven the first time it connects to your Wi-Fi network and to

reset the current Wi-Fi connection to allow a new enrolment. Once selected, the appliance gives you 5

minutes to complete the enrolment process. During this process the cooking functions, recipes and

temperature setting are not accessible from the display. Only the Wi-Fi menu is available by pressing "Extra".

You can switch the oven off using the On/Off button, but you cannot switch it back on again via the display, it

can only be switched on via the app. To exit the enrolment/reset procedure via the display, press "Extra" and

then use "< >" buttons to select "Off". After five minutes, the appliance will exit the enrolment/reset

procedure automatically.

- Iconis permanently lit: the oven is connected to your Wi-Fi router.

- : the oven sends its status to the app but it cannot be controlled remotely. The oven must be enrolled

before this is possible.

Read

If Wi-Fi is not configuredit is only possible to choose between offand reset.

- Icon blinks 1 second on an 1 second off:the oven is accessible to your Wi-Fi networkand ready to be enrolled.

If the enrolment has not been successful,the Wi-Fi icon will switch off after5 minutes.

Pressing"Extra" on the timer display allows you to select the Wi-

Fi menu. In the Wi-Fi menu if you pressthe "< >" buttons you canselect:

When the oven is connected to Wi-Fi, the default cooking time duration is 5 hours, but this can be modified by

the user.

Wi-Fi Enrolment:

Wi-Fi icon

- The icon blinks 1 second on and 3 seconds off: theoven is in read only mode.

WiFi (depends on the oven model)

HOOVER :

For detailed information on HOW TO CONNECT your OneFi appliance and HOW

TO USE IT effectively, go to http://wizardservice.candy-hoover.com/

Grill

Oven box

Turnspit

Circular

heating element

Bottom heating element

Fan

Defost

Pyro

EN 11

EN 12

Wi-Fi Parameters & Product Information for Networked Equipment

Technology

Standard

Frequency Band(s) [MHz]

Maximum Power [mW]

Wi-Fi

IEEE 802.11b/g/n

2412÷2484

41.4

Product information for networked equipment

How to activate wirelessnetwork port:

Power consumption of the product in networked

and all wirelessnetwork ports areactivated:

standby if all wired network ports are connected

How to deactivate wirelessnetwork port:

2,0 W

Ifthe wifi icon is on or blinks the wifimodule is on

If the oven is already enrolled : press “Extra” on the

timer display and select the Wi-Fi menu then press

the “<>” buttons, select On and press the select

button.

If the oven is not enrolled : follow procedure for

enrolling

Ifthe wifi icon is off the wifi module is off

To switch off the wifi press “Extra” on the timer

display and select the Wi-Fi menu then press the

“<>”buttons,select Off andpressthe select button.

T °C

default

180

210

200

210

T °C

range

40 ÷ 40

50 ÷ 240

50 ÷ 230

150 ÷ 220

50 ÷ 240

L1 ÷ L5

Function

Dial

Function (Depends on the oven model)

LAMP: Turns on the oven light.

Grill: 2140 W Barbecue: 3340 W

GRILL: use the grill with the door closed.

The top heating element is used alone and you can adjust the temperature. Five

minutes preheating is required to get the elements red-hot. Success is guaranteed

forgrills, kebabs and gratindishes. White meats should be put at a distance from the

grill; the cooking time is longer, but the meat will be tastier. You can put red meats

and fish fillets on the shelf with the drip tray underneath. The oven has two grill

positions:

The top heating element is used with the fan circulating the air inside the oven.

Preheating is necessary for red meats but not for white meats. Ideal for cooking

thick food items, whole pieces such as roast pork, poultry, etc. Place the food to be

grilled directly on the shelf centrally, at the middle level. Slide the drip trayunder the

shelf to collect the juices. Make sure that the food is not too close to the grill. Turn

the food over halfwaythroughcooking.

GRILL + FAN: use the turbo-grill with the door closed.

Allow about tenminutes extra when cooking foodsat the same time.

MULTI-LEVEL: We recommend you use this method for poultry, pastries, fish

and vegetables. Heat penetrates into the food better and both the cooking and

preheating times are reduced. You can cook different foods at the same time

with or without the same preparation in one or more positions. This cooking

method gives evenheat distribution and the smells are not mixed.

DEFROST: When the dial is set to this position. The fan circulates air at room

temperature around the frozen food so that it defrosts in a few minutes

without the proteincontent of the foodbeing changed or altered.

*Tested in accordance with the EN 60350-1 for the purpose of energy consumption declaration and energy class.

3.2 Cooking Modes

It prevents food from drying and encourages rising in cakes, bread dough and

other bottom-cooked food.

Place the shelf in the bottomposition.

BOTTOM HEATING + FAN: The bottom heating element is used with the fan

circulatingthe air inside the oven. This method is ideal for juicy fruit flans, tarts,

quiches and pâté.

EN 13

220 50 ÷ 280

CONVENTIONAL: Both top and bottom heating elements are used. Preheat

the oven for about ten minutes. This method is ideal for all traditional roasting

and baking. For seizing red meats, roast beef, leg of lamb, game, bread, foil

wrapped food (papillotes), flaky pastry. Place the food and its dish on a shelf in

mid position.

BOTTOM HEATING : Using the lower element. Ideal for cooking all pastry

based dishes. Use this for flans, quiches, tarts, pate and any cooking that needs

moreheat from below.

210 50 ÷ 230

EN 14

4. Oven cleaning and maintenance

4.1 General notes on cleaning

ACCESSORIES

OVENWINDOW SEAL

GLASS PARTS

It is advisable to clean the glass window with absorbent kitchen towel after every use of the oven. To

remove more obstinate stains, you can use a detergent-soaked sponge, well wrung out, and then rinse

with water.

If dirty, the seal canbe cleaned with a slightly damp sponge.

The lifecycle of the appliance can be extendedthrough regularcleaning. Waitfor the oven to cool before

carrying out manual cleaning operations. Never use abrasive detergents, steel wool or sharp objects for

cleaning, so as to not irreparably damage the enamelled parts. Use only water, soap or bleach-based

detergents (ammonia).

DRIP PAN

After using the grill, remove the pan fromthe oven.Pour the hot fat into a container and wash the pan in

hot water, using a spongeand washing-up liquid.

Clean accessories with a wet, soapy sponge before rinsing and drying them: avoid using abrasive

detergents.

If greasy residues remain, immerse the pan in water and detergent. Alternatively, you can wash the pan

in the dishwasheror use a commercial ovendetergent. Never put a dirty pan back intothe oven.

REMOVINGAND CLEANING WIRE RACKS

1. Remove the wire racks by pulling them in the direction of the arrows (see below)

2. To clean the wire racks either put them in the dishwasher or use a wet sponge, ensuring that they are

dried afterwards.

3. After the cleaning process installthe wire racksin reverse order.

4.2 Maintenance

3. Replacethe window by carrying out the procedure in reverse.

REMOVAL OF THE OVEN WINDOW

1. Open the front window.

2. Open the clamps of the hinge housing on the right and left side of the front window by pushing them

downwards.

7. Atthe end of cleaning or substitution, reassemblethe parts in reverse order.

On all glass, the indication "Pyro" must be legible and positioned on the left side of the door, close to the

left-handlateralhinge. In this way, the printed label of the first glass will be inside the door.

REMOVAL AND CLEANING OF THE GLASS DOOR

2.3.4. Lock the hinges, remove the screwsand remove the upper metalcover by pulling it upwards.

5.6. Remove the glass, carefully extracting it from the oven door (NB: in pyrolytic ovens, also remove

the secondand third glass (if present)).

1. Open the ovendoor.

EN 15

LOW-E

CHANGING THE BULB

1. Disconnectthe oven from the mainssupply.

3. Once the defective bulb is replaced,replace the glass cover.

2. Undo the glass cover, unscrewthe bulb and replace it with a new bulb of the same type.

5. Troubleshooting

5.1 FAQ

PROBLEM POSSIBLE CAUSE SOLUTION

The oven does not heat up

The clock is not set Set the clock

The child lock is on

A cooking function and

temperature has not been set

Deactivate the child lock

Ensure that the necessary

settings are correct

The oven does not heat up

EN 16

Steam and condensation on

the user interface panel

Clean with a microfiber

cloth the user interface

panel to remove the

condensation layer

No reaction of the touch

user interface

• Évitez de laisser des aliments à l’intérieur du four plus de 15-20 minutes

après cuisson.

• Pendant la cuisson, de l’humidité peut se condenser à l’intérieur de la

cavité ou sur la vitre de la porte. Il s’agit d’un phénomène normal. Pour

réduire cet effet, attendez 10-15 minutes après avoir allumé l’appareil

avant de mettre les aliments au four. La condensation disparaîtra de

toutes façons dès que le four aura atteint la température de cuisson.

• Cuisez les légumes dans un récipient avec couvercle plutôt que dans un

ustensile ouvert.

• AVERTISSEMENT : L’appareil et ses parties accessibles chauffent

pendant l’utilisation.

• AVERTISSEMENT : Vérifiez que l’appareil est éteint avant de remplacer

l’ampoule, pour éviter le risque de chocs électriques.

• AVERTISSEMENT : Afin d’éviter tout risque lié à la réinitialisation

accidentelle de l’interrupteur thermique, l’appareil ne doit pas être

alimenté par un dispositif de commutation externe, tel qu’une minuterie,

ou relié à un circuit régulièrement allumé et éteint.

• Les enfants de moins de 8 ans doivent rester à une distance de sécurité

de l’appareil s’ils ne sont pas surveillés en permanence.

Faites attention à ne pas toucher les parties chaudes.

• Les enfants ne doivent pas jouer avec l’appareil.

• AVERTISSEMENT : Les parties accessibles peuvent devenir très chaudes

quand le grill est en marche. Les enfants doivent être tenus à une

distance de sécurité.

• Le nettoyage et l’entretien ne doivent pas être effectués par des enfants

sans surveillance.

L’appareil peut être utilisé par des enfants de plus de 8 ans et par des

personnes dont les capacités physiques, sensorielles ou mentales sont

limitées, sans expérience ni connaissance du produit, uniquement s’ils

sont surveillés ou s’ils ont été informés de la manière d’utiliser l’appareil,

en toute sécurité et qu’ils comprennent les risques possibles.

FR 17

Conseils De Securite

FR 18

• Utilisez uniquement la sonde à viande recommandée pour ce four.

Le conducteur jaune et vert de mise à la terre ne doit pas être bloqué par

le disjoncteur. La prise d’alimentation ou le disjoncteur multipolaire

utilisé pour le branchement doit rester à tout moment accessible après

installation de l’appareil.

La fiche du câble d’alimentation et la prise d’alimentation doivent être

conformes aux normes en vigueur dans le pays d’installation.

• Branchez le câble d’alimentation sur une prise de courant qui supporte

le voltage (le courant et la charge sont indiqués sur l’étiquette) et vérifiez

la présence d’une mise à la terre. La prise d’alimentation doit supporter la

charge indiquée sur l’étiquette et être dotée d’une mise à la terre en état

de fonctionnement. Le conducteur de mise à la terre est jaune et vert.

Cette opération doit être exécutée par le personnel qualifié. En cas

d’incompatibilité entre la prise d’alimentation et la fiche du câble de

l’appareil, demandez à un électricien professionnel de remplacer la prise

d’alimentation par un dispositif compatible.

• Le débranchement doit se faire à l’aide soit de la prise d’alimentation,

soit d’un interrupteur installé sur le circuit électrique fixe, conformément

aux normes électriques.

• N’utilisez pas un nettoyeur à vapeur pour le nettoyage.

• Le câble d’alimentation requis est le H05V2V2-F.

• N’utilisez pas de matériaux rugueux ou abrasifs ou de racloirs

métalliques acérés pour nettoyer les vitres des portes des fours, car cela

pourrait rayer la surface et provoquer la rupture de la vitre.

• Coupez le four avant de retirer les pièces amovibles.

Il est possible de brancher l’appareil à la prise d’alimentation en installant

entre l’appareil et la prise d’alimentation un disjoncteur multipolaire qui

supporte la charge électrique maximale, conformément aux lois en

vigueur.

• Si le câble d’alimentation est endommagé, il doit être remplacé par un

câble ou un faisceau de câbles spécial disponible auprès du fabricant ou

du service après-vente.

• Après le nettoyage, remontez-les selon les instructions.

FR 19

• Cette opération doit être exécutée par le personnel qualifié. Le

conducteur de mise à la terre (jaune et vert) doit être environ 10 mm plus

long que les autres conducteurs. Pour toutes réparations, contactez le

service après-vente en insistant sur l’utilisation de pièces de rechange

d’origine.

• Aucune autre opération ni aucun autre réglage ne sont requis pour faire

fonctionner l’appareil aux fréquences nominales.

• L’appareil ne doit pas être installé derrière une porte décorative, pour

éviter la surchauffe.

• Une coupure de courant prolongée durant une phase de cuisson peut

engendrer un dysfonctionnement de l’écran. Dans ce cas, veuillez

contacter le service après-vente.

• Le non-respect des consignes ci-dessus peut compromettre la sécurité

de l’appareil et annuler la garantie.

• AVERTISSEMENT : N’enlevez jamais le joint de la porte du four.

• AVERTISSEMENT : Ne recouvrez pas les parois du four avec du papier

aluminium ou une protection jetable disponible dans les magasins. Le

papier d’aluminium ou toute autre protection, en contact direct avec

l’émail chaud, risque de fondre et de détériorer l’émail de la cavité

intérieure.

• PRUDENCE : Ne remplissez pas le fond de la cavité avec de l’eau

pendant la cuisson ou lorsque le four est chaud.

• Pour introduire la grille dans le four, vérifiez que le butoir est dirigé vers

le haut et au fond de la cavité. La grille doit être complètement insérée

dans la cavité.

• Éliminez les éclaboussures importantes avant de procéder au

nettoyage.

Instructions Générales

1.1 Indications de sécurité

1.2 Sécurité électrique

1.3 Recommandations

1.4 Installation

1.5 La gestion des déchets et la

protection de l'environnement

1.6 Déclaration de conformité

2.1 Vue d'ensemble

2.2 Accessoires

2.3 Première utilisation

Description du produit

3.1 Description de l'affichage

3.2 Mode de cuisson

Utilisation du Four

4.1 Remarques générales concernant

le nettoyage

4.2 Nettoyage à la vapeur

4.3 Entretien

• Retrait et nettoyage des grilles

• Retrait de la porte du four

• Retrait et nettoyage des vitres

• Remplacement de l'ampoule

Nettoyage du four et

maintenance

5.1 F.A.Q.

Dépannage

SOMMAIRE

FR 20

La page charge ...

Hoover HOZP717IN/E Manuel utilisateur

Marque: Hoover

Modèle: HOZP717IN/E

Taper: Manuel utilisateur

Télécharger le PDF

rapport

dans d''autres langues

italiano: Hoover HOZP717IN/E Manuale utente
English: Hoover HOZP717IN/E User manual
español: Hoover HOZP717IN/E Manual de usuario
Deutsch: Hoover HOZP717IN/E Benutzerhandbuch
Türkçe: Hoover HOZP717IN/E Kullanım kılavuzu

Hoover HOZP717IN/E Manuel utilisateur

Hoover HOZP717IN/E Manuel utilisateur

dans d''autres langues

Documents connexes

Autres documents